Over 1 million tech questions and answers.

Yoga 900 waking from sleep

Q: Yoga 900 waking from sleep

I had posted about this near the start of 2016 and then a BIOS update was released to fix the issue. The Yoga 900 wakes up from sleep when picked up and rotated. Previously, the issue was with the screen hitting the buttons and waking the laptop up. Now, I think it might have to do with rotating it when it is asleep. I do not have this problem if I rotate the laptop as it is going to sleep, only if I pick it up after it has gone to sleep. I have been having this issue since the last BIOS update was released. Is there some way to fix this problem? If not, can an update be released to fix the issue? If I need to clarify something about the problem, please let me know.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Yoga 900 waking from sleep

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 75.2

Hello, My Yoga 900 has woken from sleep in my backpack multiple times. I have tried to find a setting to disable the keyboard while the computer is asleep, but I have not been able to find one. I have asked technical support about this problem and they too do not have a solution. I requested the agent I spoke with to pass along my request to the tech department and he agreed to do so. Is there some existing way for me to solve this issue? 













Solved!

Go to Solution.

A:Yoga 900 waking from sleep

Hello, Why don't you just put the Yoga to hibernation while in your backpack ?

Read other 9 answers
RELEVANCY SCORE 75.2

Anyone else having a problem with it not waking up from sleep? I put it to sleep, the screen goes black and the keyboard is still lit up. I try to press the Windows logo on the screen or the power button and nothing happens. I feel the vibration but that is it. What I find funny is that I can still turn on and off the backlit keyboard.

A:Yoga 2 Pro not waking up from sleep

Yeah, so it eventually turns off on its own to the point where the Windows logo below the monitor no longer vibrates when pushed and I have to power on the machine. Might just do a restore and see what happens from there...

Read other 9 answers
RELEVANCY SCORE 75.2

I had posted about this near the start of 2016 and then a BIOS update was released to fix the issue. The Yoga 900 wakes up from sleep when picked up and rotated. Previously, the issue was with the screen hitting the buttons and waking the laptop up. Now, I think it might have to do with rotating it when it is asleep. I do not have this problem if I rotate the laptop as it is going to sleep, only if I pick it up after it has gone to sleep. I have been having this issue since the last BIOS update was released. Is there some way to fix this problem? If not, can an update be released to fix the issue? If I need to clarify something about the problem, please let me know. 

A:Yoga 900 waking from sleep

Hello, I know there have been BIOS updates in the past to address this issue, but my laptop still occassionally wakes from sleep with the lid closed. Is anyone else having this issue? If not, is there a setting I may be looking over that would fix this problem? 

Read other 2 answers
RELEVANCY SCORE 74.4

I have an issue with my Thinkpad Yoga (20CD). Sometimes after I have left my Yoga unattended. I come back and find that it's on (red light on) but screen is black, but nothing happends when moving mouse or pressing keys. I believe this is happens with regards to sleep mode. I still have some analysis to do wether it happens when power is connected or not, external monitor is connected or not. I have installed all the latest drivers from lenovos website.

A:Thinkpad Yoga, not waking up after sleep

I have a new ThinkPad Yoga and when it is running on battery power if the screen goes to sleep after five minutes it will not wake up.  I can press the power button and see the LED above the I flash slowly flash like it is in sleep mode but if I try to wake it up the screen will not come back on.  I am forced to press and hold the power button to force shut it down and them power it back on.  Has anyone else seen this issue?  I am currently going to download the Intel version of the HD video driver and see if that fixes the problem.
 
Moderator Note; subject edited; post merged in

Read other 9 answers
RELEVANCY SCORE 74.4

The Yoga 900s refuses to come back from sleep in 90% of the time. The power led is on but the screen stays black. I have to force shutdown and start the Yoga. After a couple of time doing this Windows will end up in KERNEL_SECURITY_CHECK_FAILURE and than no longer boots. After doing a reset Windows works again for about 3 months and than the whole thing starts over. Latest drivers are installed .

Read other answers
RELEVANCY SCORE 74.4

The Yoga 900s refuses to come back from sleep in 90% of the time. The power led is on but the screen stays black. I have to force shutdown and start the Yoga. After a couple of time doing this Windows will end up in KERNEL_SECURITY_CHECK_FAILURE and than no longer boots. After doing a reset Windows works again for about 3 months and than the whole thing starts over. Latest drivers are installed .

Read other answers
RELEVANCY SCORE 73.6

Hello guys!Sometimes (quite frequently), after waking up from sleep, My ThinkPad Yoga 460 would have no sound. This problem is solved by restarting the machine but it's really annoying having to do so frequently.I tried:1. reinstall the conexant sound driver; didn't help2. Turn off Dolby Audio; didn't help Does anyone know the reason?Any help is much appreciated! Thank you!

Read other answers
RELEVANCY SCORE 73.6

I have a Y2P which I upgraded to Windows 10 a few months ago.  I have updated all the drivers and the BIOS, done the registry fix for the DPTF driver discussed here to fix degraded performance in non-laptop mode, and turned off adaptive brightness.  Most of my use is plugged in with the machine in stand mode, with a second monitor and BT mouse and BT keyboard. After doing the DPTF driver fix, I noticed that a few times when I was away from my desk, the machine rebooted spontaneously due to a critical error which seemed to be from overheating, so I set the power mode to sleep after 10 minutes idle.  Most of the time, now, it has no difficulty waking up.  But so far twice when I have woken the machine, the primary monitor is off, and can't be found by any setting or control panel, and the auxilliary monitor behaves as though it is the primary one.  This can be fixed by rebooting or by unplugging the second monitor, and then plugging it in again. Also, a couple of times now, when the machine wakes, the primary monitor is very dim.  The first time it happened, I went into settings and made it brighter.  But when it happened today, despite my increasing brightness to 100% (through the keyboard, through the display settings, through whatever I could find) the screen stayed very dim.  I finally rebooted, and the screen returned to normal. Does anyone have any suggestions for keeping these things from happenin... Read more

A:Yoga 2 Pro monitor issues upon waking from sleep

Just replying to myself to bump this topic.  Has anyone else experienced this, and/or have an idea of how to stop it?

Read other 1 answers
RELEVANCY SCORE 73.6

Hello, we got 2x Try-and-Buy Lenovo Yoga Tablet Laptops (an X1 Yoga and a Yoga 260) to evaluate their suitability for our company, since we intend to upgrade several of our employees laptops. However, ever since we got the devices we noticed on both of them frequent issues with the display and waking from sleep. Very often the laptops won't wake up properly with the screen staying black. In those cases the display-backlight seems to turn on, and I assume the system is running somehow in the background. Putting the computer to sleep again (e.g. by closing the lid) makes the computer wake up properly on the second attempt. Different error in the same category is when a video is running and the laptop is connected to AC - plugging out the AC cord made the screen go black while the media content's sound kept playing. All drivers were updated to the newest version via Lenovo System Update 5.07.0029. Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new display (!). Apparently, that seems like a driver/software issue?! Best regards

Read other answers
RELEVANCY SCORE 70

For a few days only ! After my laptop has been in sleep mode for a long time only. When waking from sleep mode ThinkPad USB-C Dock Ethernet has no network connection. I select 'troubleshoot problem', it then resets 'ThinkPad USB-C Dock Ethernet' and say that the problem has been fixed.  It says the 'default gateway was not available'. All my Bios, drivers and USB-C firmware are up to date! Do you have any idea ? Thank you

Read other answers
RELEVANCY SCORE 54

I had this same problem while running under Win 7, and now under Win 8.1 Pro my PC is doing the same thing. It seems to wake up all on its own from "Sleep". I went through the device manager and looked at everything, and nothing but my KB and mouse where set to "Allow this device to wake computer". I set KB to disallow to wake PC, and left just my mouse.

Mobo is an Asus Sabertooth X79

I tried to use this command from both the Admin Command Prompt and PowerShell but basically am told its not a valid command... powercfg ?devicequery wake_armed, even though this very command is posted on Ms own tech site for commands.

I used "powercfg -lastwake" which resulted in...

Wake History Count - 1
Wake History [0]
Wake Source Count - 2
Wake Source [0]
Type: Device
Instance Path: PCI\VEN_1B21&DEV_1042&SUBSYS_84881043&REV_00\4&15c45f2f&0&00E3
Friendly Name:
Description: ASMedia XHCI Controller
Manufacturer: ASMedia Technology Inc
Wake Source [1]
Type: Device
Instance Path: USB\ROOT_HUB20\4&39f1d5&0
Friendly Name:
Description: USB Root Hub
Manufacturer: (Standard USB Host Controller)
PS C:\Windows\system32> powercfg ?devicequery wake_armed
Invalid Parameters -- try "/?" for help
PS C:\Windows\system32>

A:Waking From Sleep ? ? ?

I would try making the keyboard the only device that is allowed to wake the computer. Because your mouse works by detecting motion, it is far more likely to send a false signal and wake up the computer than your keyboard.

Read other 3 answers
RELEVANCY SCORE 54

I can boot really quickly but after I try to resume from sleep it takes at least 10 min. The strangest thing. This same build with my last windows seven install did not have this problem with the exact same hardware. This is a recent install. I have all the newest drivers and windows updates. No issues in the device manager. I have looked through the event viewer but I do not show any errors at the time I was resuming from sleep..please any direction would be appreciated.

A:Waking from Sleep LAG

I did a powercfg -a

C:\Windows\system32>powercfg -a
The following sleep states are available on this system: Standby ( S3 ) Hibernat
e Hybrid Sleep
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
Standby (S2)
The system firmware does not support this standby state.

Read other 5 answers
RELEVANCY SCORE 54

Inspiron 15 7000, Win 10
My laptop has always awoke from sleep mode by opening the lid, for the last week it has stopped doing it.
The keyboard and power button light but the screen does not, it just says black, eevn after using the keyboard.
All the Control Panel settings appear to be correct and unchanged from before.
Has anyone any ideas? Thanks

Read other answers
RELEVANCY SCORE 54

When I put my computer to sleep, it keeps waking up all on it's own. Why won't it stay asleep? Is this a problem with my computer or Windows8?

A:Keep waking up from sleep

Is your computer connected to the network via Ethernet?

Read other 10 answers
RELEVANCY SCORE 54

My compuer is set up to go to sleep after 1 hour (hybrid sleep option has been turned off). If I wake up the machine after about three hours Windows resumes ok but if it is left asleep overnight then instead of resuming Windows it reboots.

Any idea why this is happening and is there some way to correct this?

JP

A:Waking from sleep

Hello JP,

Is it possible your computer is set to hibernate after a certain amount of time? Check and confirm that. Could be a resume from hibernate that is causing the issue.

Thanks,
~Jonathan

Read other 4 answers
RELEVANCY SCORE 54

My PC is no longer waking from sleep by pressing a keyboard button which used to work. I have to restart the PC using the power on button - then I get the a critical error Event 41 - The System has rebooted without cleanly shutting down first. I also get error Event 6008 The previous shutdown at .... was unexpected.

I've run SFC /SCANNOW and that's fine, the keyboard is set to wake the PC, USB selective suspend is disabled, the PC is not allowed to power off USB devices and link state power management is off.

I can't think of any other software changes to try. Is there a diagnostic tool or Fixit program to help solve this problem?

My XFX PSU is playing up taking 10-20secs before the +5VSB signal appears on initial power on. Could this be an issue preventing wake from sleep? Note the PC reboots straight away from a failed wake from sleep as soon I press the power on button - but then it logs the errors Event 41 & Event 6008 noted above.

Read other answers
RELEVANCY SCORE 53.2

Good day genttleman,i need some help over here

ive just bought new mobo ASUS p8z77-m
and somehow one major issues occur.

once the display sleep,i cant seems to wake it up
my fan hdd led still there spinning like normal but the display remain black
while the monitor led just blinking as it has lost power with cpu

i doubt this had to do with software since it happens with 32 bit before i try with 64
googling result left me with bios setting and certain method which also leave me with dead end such as

- going to device manager>right click usb root hub properties>power management> allow this device to wake up the computer
but that choice is greyed out. i lost there

- playing with various windows power management setting such as disable hybrid sleep.disable usb suspended with no avail

- go to bios > AMP> enable wake up from PCI,PCIE but result still the same

ive yet trying to enable ErP from bios considering the only available option is S4+S5 or S5 but theres no option of S3?
or did i miss something there because S3 is the option that i want

- using powercfg command line to enable waking up device yet failed too


and most of the time,when screen becomes black ,i have to press reset button and it will reboot with windows did not shutdown properly yadi yada.
this is distressing

any PC guru here can shed some light about this, much much appreciated . Thanks


Cheers.

A:PC not waking up after sleep, (Win 7 64bit)

Update the Display driver. First run all Windows Updates (a performance update might also help) after enabling Automatically get recommended drivers and updates for your hardware (Step 3).

If that doesn't help import the latest driver from the PC or device's Support Downloads webpage.

If those don't help then work through these Sleep Mode Problems - Vista Forums .

Check the Performance log for clues at time of sleep, establish a clean boot, do the other Troubleshooting Steps for Windows 7

If all else fails you can determine the cause with certainty by Gathering a Startup, Shutdown, Sleep, Hibernate, or Reboot Trace - Windows 7 Forums

Read other 1 answers
RELEVANCY SCORE 53.2

every night i set my computer to sleep and then unplug the extnal HDD and the computer wakes up? is there any way to stop the power off of the external HDD from waking the machine? the same thing happens when i plug bit back in aswell

A:prevent usb waking from sleep

I found this thread in the Vista Forums that may have some useful information for you.

How to turn off wake up on USB in Vista - Vista Forums

Read other 2 answers
RELEVANCY SCORE 53.2

Up until yesterday, if my pc was in sleep mode and I wanted to use it, I simply had to click the mouse and it would kick into life. That doesn't happen anymore and I can't seem to get the answer.

I thought about doing a system restore but I discovered this morning that the option is disabled by default and that you have to activate it manually. I have done this now but of course, it is of little use with this problem.

I have been on to the Microsoft Community and asked the question but as of this moment it hasn't been cracked.

Does anyone have any ideas please?

Thank you

A:Waking pc from sleep with the mouse

Make sure the mouse driver is set to wake up the device from sleep.

Read other 7 answers
RELEVANCY SCORE 53.2

Hi all,

I have been getting random BSOD after waking the computer from sleep. On the last BSOD the CHKDSK utility ran automatically when the computer rebooted.

The computer is a self build.

Thank you for looking, hope you can help.

Attachment 233724

A:BSOD when waking from sleep

Welcome

Your Hotspot shield drivers need to be updated.

Free VPN for iPhone, Android, Mac and Windows for secure and private browsing, accessing blocked sites and unblocking Facebook and Youtube - Hotspot Shield Driver Reference Table


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 109b, 4440061, fffffa800b486bd0}

Unable to load image \SystemRoot\system32\DRIVERS\HssDrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for HssDrv.sys
*** ERROR: Module load completed but symbols could not be loaded for HssDrv.sys
GetPointerFromAddress: unable to read from fffff800032c9100
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : HssDrv.sys ( HssDrv+2bac )

Followup: MachineOwner
---------

Code:
2: kd> lmvm HssDrv
start end module name
fffff880`103c2000 fffff880`103db000 HssDrv T (no symbols)
Loaded symbol image file: HssDrv.sys
Image path: \SystemRo... Read more

Read other 4 answers
RELEVANCY SCORE 53.2

My computer cannot wake up from sleep without getting bsod. It also cannot cold boot, the first time I try to boot it up there is no picture on the screen, after the first try it boots fine though.

Attached is the crash log. There are multiple there and all are essentially the same (I imagine). The most recent is obviously the most recent though and thus most relevant.

Thanks for any help.

A:BSOD Waking from sleep

A number of errors in the WER section of MSINFO32 point to video drivers. Please update your video drivers, then if the problems continue, try the troubleshooting steps here: Video TDR Timeout - 0x116 + 0x117 - Sysnative Forums

Also, try the video stress tests from this link: Hardware Diagnostics

Your BIOS dates from 2010. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

PTSimBus.sys Wed Jun 17 22:20:48 2009 (4A39A480)
PenTablet Bus enumerator
http://www.carrona.org/drivers/driver.php?id=PTSimBus.sys

HECIx64.sys Thu Sep 17 15:54:16 2009 (4AB293E8)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

Analysis:
The following is for informational purposes only.

Code:
**************************Sat Aug 3 19:23:08.808 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\080313-52234-01.dmp]
Windows 8 Kernel ... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

Hey guys,
 
My computer has a BSOD after waking up from sleep everytime. After waking up and logging in, everything seems fine, then the desktop icons and the start bar will disappear and the only thing remaining is the mouse cursor with the loading icon. Seconds after the computer BSOD's on me.
 
After rebooting I get the old 'Windows has recovered from an unexpected shutdown' with this in it:
 
Problem signature:
  Problem Event Name:    BlueScreen
  OS Version:    6.1.7601.2.1.0.256.1
  Locale ID:    3081
Additional information about the problem:
  BCCode:    f4
  BCP1:    0000000000000003
  BCP2:    FFFFFA8009A37B30
  BCP3:    FFFFFA8009A37E10
  BCP4:    FFFFF800031DC0D0
  OS Version:    6_1_7601
  Service Pack:    1_0
  Product:    256_1
 
It's strange because this only happened after I installed Service Pack for Windows 7. Any light that can be shed would be great.
 
Thanks!
 
 
 

A:BSOD after waking up from sleep

to the forum mate.
 
Please follow the below steps.
 
Upload the actual crash dump files.
 
You will find the crash dump files inside C:\Windows\Minidump folder. To copy the dumps, disable "User Account Control" first. Otherwise you may receive a permission error. After disabling UAC, copy and zip most recent three or more dumps to a single file. Either attach the zip with next reply using "More reply options --> Attach files" or use a free file hosting site. 
 
For example -> http://www.mediafire.com/
 
Publish a snapshot of your system using Speccy.
 
"Speccy" is a free tool which can list the hardware specs, temperature status, installed Windows updates, HDD SMART info etc of your system. Please read the below tutorial to know how to use "Speccy" to collect system info.
 
http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
Don't paste the output displayed by "Speccy" here. Instead paste the web link it displays.
 
Minitoolbox log.
 
"Minitoolbox" can list all the installed programs as well as event log errors in your system. Download "Minitoolbox" from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 Run the tool and only select the following tick boxes.

List last 10 Event viewer errors
List installed program
List users, partition and memory size
List Minidumps

Now click "Go" and post the output display... Read more

Read other 5 answers
RELEVANCY SCORE 53.2

After waking from sleep mode...is there way to avoid having to resign back in?

A:waking from sleep mode

Well I found it...took some doing...but I found it....mark as solved.

Read other 5 answers
RELEVANCY SCORE 53.2

Greetings. I've lately been getting a number of BSOD pop-ups when waking my computer from sleep or hibernation. Though it has happened occasionally in the past, I've noticed an increase since installing a new Blu-Ray drive.

I am able to recreate the BSOD just by putting the computer to sleep, then waking it. After restarting from the BSOD, it takes several minutes for the computer to leave the bios and boot into Windows. The Blu-Ray drive also acts as though it has no power going to it (no lights, won't open).

If I disconnect the drive from the SATA port on the motherboard, my computer is able to wake from sleep normally.
I've checked the manufacturer's website for any help, but haven't had any luck. I'm not really sure it's so much a hardware problem, since the drive boots regularly until waking from sleep or hibernation, though, I am prepared to get a replacement/refund if it comes to it.

Attached is the .zip for my dump files. Thanks for the help.

A:DRIVER_POWER_STATE_FAILURE when waking from sleep

If I disconnect the drive from the SATA port on the motherboard, my computer is able to wake from sleep normally.



It appears that you've solved the problem. As long as you installed the Blu-Ray drive according to the manufacturer's instructions - there shouldn't be any problems of this sort that you can definitely pin on the Blu-Ray drive. Things don't have to fail completely in order to be broken. Failure of an individual component inside of the drive may cause just this sort of error.

Although it'll be a pain, obtain an RMA for the drive and send it back for another one. It won't hurt to do this, and it should help when you replace the drive.

Beyond that, here's the BSOD analysis.......

Your BIOS dates from 2010. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Interestingly, the Blu-Ray drive doesn't show in the MSINFO32 report. Was it disconnected when you generated the reports?

This device has problems in Device Manager:





WAN Miniport (Network Monitor) #2 ROOT\MS_NDISWANBH\0001 This device is not working properly because Windows cannot load the drivers required for this device.



Right click on it and select "Uninstall". DO NOT d... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

I have my computer set to sleep after 3 minutes, But I notice it always wakes up on it's own accord. Shortly after going into sleep mode. I have disabled wake timers in advanced power settings, but doesn't stop it.

Oh and the other thing, which might be related. When resuming from sleep, there is a USB Device is Not Recognised message just above the system tray. Could that be causing it. How can I tell what USB Device it is. Mouse and keyboard are working fine and are the only 2 usb devices I have left plugged.

A:Computer keeps waking up from Sleep

Try going into your settings for sleep timer
{Specialties}
Windows 7 | Windows Vista | Mac OS X | Mac OS 7 | Mac OS 9 | iOS 7 | Vintage Macintosh

Read other 7 answers
RELEVANCY SCORE 53.2

Just built a new computer. All of the drives and the Windows installation is the same as in the old system. I don't know if the issue would have occurred in the old system as I never tried to put my computer to sleep. I was getting one BSOD when waking from sleep (something to do with kernel (0x0000007a bugcheck) but I believe I got that fixed by running chkdsk on all of my HDDs (not on SSDs).

Now, after having run those CHKDSKs, I wanted to test it. Unfortunately, I now get bugcheck 0x00000154 (0xffffe001bc68a000, 0xffffd000216fb080, 0x0000000000000000, 0x0000000000000000)

Any ideas?

BLAKE8-Mon_05_30_2016_184233_60.zip

Read other answers
RELEVANCY SCORE 53.2

Hello, i've been trying to sort this prob for a while to no avail. a while back i changed a bios setting for my hdd to ahci mode to allow me to use external hdds with my esata port. this works fine but upon waking from sleep i get the bsod and points to ntoskrnl.exe+71f00. I have since reformatted the system (win7 x64 ultimate) but have had no lluck as bsod still occurs

any help or suggestions is greatly appreciated
regards KevO

A:bsod upon waking from sleep

ASACPI.sys the 2005 version is a huge cause of BSODs


   Information
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005)


Code:
ASACPI.sys fffff880`03c1d000 fffff880`03c25000 0x00008000 0x42476c4c 28/03/2005 06:30:36

Read other 2 answers
RELEVANCY SCORE 53.2

Now let me start by saying that I don't actually see the bluescreen, I see a black screen. Some times my PC will wake fine and let me sign in with no problems, other times when I attempt to wake it I can see my keyboard leds flicker. It flickers when the PC restarts but the fans stay on. It'll let me log in fine with no error messages. Sometimes my PC will go black and i'll get the notification from a crashed video driver that has recovered. I had these problems when I ran windows 7 as well. I believe it is a hardware issue. When I first build the PC I had problems with bluescreening all the time. I changed BIOS settings and it worked fine, but ASUS changed my BIOS settings into performance mode and I'm started having problems again. Just let me know if you find anything in the files, thank you.

MILLER-Sat_11_28_2015_164711_74.zip

Read other answers
RELEVANCY SCORE 53.2

Hi, I am getting a BSOD every time I wake my computer up from sleep.

My memory dump information is attached.

Thanks

A:BSOD on waking from sleep

Only 48 Windows Updates installed. Most systems have 66 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

You have a Belkin Wireless USB Network Adapter. Here's my spiel about these:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to.



Please uninstall Gigabyte Easy Saver and ET6 (EasyTune6). They are known to cause BSOD's on some Windows systems.

The memory dumps blame a driver for the Belkin Wireless USB Network Adapter ( netr28ux.sys).
Please update the driver. If the BSOD's continue, please r... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

I have recently built a HTPC and I'm having problems with BSODs when the computer wakes to record a TV show. I've had several instances in the two weeks since I built this computer. There are many times that the computer wakes with no problems and successfully records. So this problem does not occur everytime the PC wakes.

I'm using a OEM copy of Windows 7 Home Premium 64-bit. I did a fresh install about two weeks ago after first putting the system together. I performed a second complete install around a week ago. With the exception of the case and power supply all of these components have been used in other systems before (Win 7 and/or XP)

The MB, CPU, HDDs, ODD, and tuner card are all ~6-10 months old and have been in use in various systems during that time. The RAM is probably over 2 years old. The only new parts are the case and power supply (picoPSU).

I have attached the output from the BSOD Dump & System File Collection app as well as a System Health Report.

A:BSOD after waking from S3 sleep

Hello,
Dump blames ATI Graphics Driver - do the followings...
- Boot into Safe Mode with Networking
- Uninstall the Display Drivers including Catalyst Control Center
- Use Driver Sweeper to sweep the traces of the driver Guru3D - Driver Sweeper
- Reboot into normal mode
- Install the latest version ATI Radeon

Uninstall Norton/Symantec as they are a known cause of BSOD on some Win 7 systems. Run this removal tool to remove Norton: Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

Replace with MSE: http://www.microsoft.com/security_essentials/

Lastly, install Service Pack 1: Learn how to install Windows 7 Service Pack 1 (SP1)

Regards...
Dean

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 100000EA, {fffffa8004bc3340, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : dxgkrnl.sys ( dxgkrnl!TdrTimedOperationBugcheckOn... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

Hi Everone, im not really new hear since I have been to this forum before but this is my first time actually registering.

I seem to be having this problem with windows 7 when waking the PC from sleep. It will work fine for a few hours and then bam I get hit with a BSOD giving me this error:
==================================================
Dump File : 103011-40045-01.dmp
Crash Time : 10/30/2011 12:39:07 AM
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x000000d1
Parameter 1 : fffff880`061b164c
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000008
Parameter 4 : fffff880`061b164c
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cc40
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\103011-40045-01.dmp
Processors Count : 6
Major Version : 15
Minor Version : 7601
Dump File Size : 276,224
==================================================

This only happens once the PC goes to sleep, if the PC dose not go to sleep then I never get this error...

What I don't understand is that this is a totally brand new PC that I built, its an AMD x6 with 16... Read more

A:BSOD When Waking PC from Sleep

  
Quote: Originally Posted by Black Stealth


Hi Everone, im not really new hear since I have been to this forum before but this is my first time actually registering.

I seem to be having this problem with windows 7 when waking the PC from sleep. It will work fine for a few hours and then bam I get hit with a BSOD giving me this error:
==================================================
Dump File : 103011-40045-01.dmp
Crash Time : 10/30/2011 12:39:07 AM
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x000000d1
Parameter 1 : fffff880`061b164c
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000008
Parameter 4 : fffff880`061b164c
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cc40
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\103011-40045-01.dmp
Processors Count : 6
Major Version : 15
Minor Version : 7601
Dump File Size : 276,224
==================================================

This only happens once the PC goes to sleep, if the PC dose not go to sleep then I never get this error...

What I don't unders... Read more

Read other 9 answers
RELEVANCY SCORE 53.2

My XPS 15 9550 tends to wake from sleep instantly or after a short while. I find this particularly inconvenient if I find it hot in the backpack. It occurs on battery, power adapter, and powered via the WD15 dock. 
For instance, info from Event log \ System:
Information 22/11/2016 22:13:42 Power-Troubleshooter 1 None
The system has returned from a low power state.
Sleep Time: ‎2016‎-‎11‎-‎22T21:13:22.481918500ZWake Time: ‎2016‎-‎11‎-‎22T21:13:40.495506200Z
Wake Source: Unknown
I tried to debug the condition using powercfg, but I am not able to locate the cause. 
powercfg -lastwake
Wake History Count - 1Wake History [0] Wake Source Count - 0
powercfg -devicequery wake_armed
NONE
(because I have disabled everything which could cause wake)
powercfg -availablesleepstates
The following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast Startup
The following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state.
Standby (S2) The system firmware does not support this standby state.
Standby (S0 Low Power Idle) The system firmware does not support this standby state.
Is this normal? I have noticed that toggling 'C states' in BIOS doesn't affect the outcome. 
powercfg /sleepstudy
S0 Low Power Idle is not supported on this machine. Cannot run tool.
Finally, powercfg -energy makes a long report, but I don't know if... Read more

Read other answers
RELEVANCY SCORE 53.2

I have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue? Your advice would be appreciated.


Kind Regards

Chris

Win 7 Ultimate 32 bit

A:No Speakers After Waking Up From Sleep

Generally, that is a driver problem. Check with your PC vendor (or motherboard vendor if its a custom built) for the latest RealTek driver. Install the new driver (or if its the same version as you have, reinstall it). Restart the PC and see if that makes any difference. Non vendor sound drivers can either not work or not work correctly.

There may be other problems but the drivers are the first item.

BTW, please fill in the My System Specs - it helps those that are trying to help you.

Read other 5 answers
RELEVANCY SCORE 53.2

I have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.

The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.

Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.

Thanks everyone.

A:No sound when waking PC from sleep.

Generally, problems with sleep are device drivers. Check with Biostar to see if they have an updated RealTek sound driver (the sound driver from the motherboard vendor usually works best).

Read other 5 answers
RELEVANCY SCORE 53.2

Hi all.

Recently I'd been having problems with BSOD on waking from sleep mode. This also happened some other times as well.

I wondered whether it had anything to do with my MBOX 2 Mini sound card drivers. I formatted the hard drive, started Windows again. Still happening.

I've attached a Log Collector file. I'm not sure what the problem is and I'm not that computer savvy. Would appreciate any help anyone can give!

A:BSOD mostly after waking from sleep, sometimes more

Code:
fffff880`046395f0 fffff900`00000000
fffff880`046395f8 00000000`000003b9
fffff880`04639600 fffff960`0014e000*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
win32k+0xee000
fffff880`04639608 fffff880`009ed180
fffff880`04639610 00000000`00000000
.
fffff960`00060000 fffff960`00382000 win32k T (no symbols)
Loaded symbol image file: win32k.sys
Image path: \SystemRoot\System32\win32k.sys
Image name: win32k.sys
Timestamp: unavailable (00000000)
CheckSum: 00000000
ImageSize: 00322000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
This is the first time I've ever seen a Windows system file flagged in this manner.

Do the following:
1. Click Start
2. In the search box, type cmd
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow and hit enter.
5. Repeat step 4 an additional 3 times, one immediately after the other.
6. Report the output of the above.

Now ensure Windows is fully updated.

Lastly, run a scan for rootkits using this tool and report back:
TDSSKiller Download

Read other 3 answers
RELEVANCY SCORE 53.2

I just got a refurbished Dell XPS 18 (1810). When I put it into sleep mode (either by pressing power button or selecting sleep through the Windows GUI) it goes to sleep for about a second and then wakes up again.
I've followed some recommendations on other posts/sites to turn of wake times, make sure that no devices are set on the Power Management tab in device manager to wake etc. But seems to make no difference. Occasionally it goes to sleep for a few minutes, but then automatically wakes.But usually it just wakes up within a couple of seconds.
Doesn't matter if it is on battery or mains power. Does the same
Is this some known bug/setting in Intel quick startup? 
Thanks
Jim

A:XPS 18 waking prematurely from sleep

I have exactly the same issue - dell support please help with this. thanks, Mark

Read other 2 answers
RELEVANCY SCORE 53.2

Hi,

basically the same as topic name..

there is the minidump:


Code:
http://www.sendspace.com/file/23mgao
If you need any more info just tell me what should i post here.. :)

A:BSOD after waking up from sleep

Hi -

Please follow these instructions - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 5 answers
RELEVANCY SCORE 53.2

When the computer "wakes" from sleep all i get is a backround, I can move a mouse around but thats it. Windows 7 operating system.

A:When waking from sleep i get a backround

Hi

Do you have two monitor cables plugged into your video card but are using only one monitor?

James

Read other 5 answers
RELEVANCY SCORE 53.2

Whenever I wake my computer up from sleep it seems as if it's powering on rather than waking up. Then it hits a BSOD and restarts normally.

Any clue? I've attached the BSOD's dump file.

Thanks for any help.

A:Crashes After Waking Up From Sleep

Hello,

Please take a look at the following thread and perform the requested steps.

http://www.techsupportforum.com/foru...ta-452654.html

Once you have the proper reports please post back here.

Also include the make/model of the PC or if custom built post the specs.

From the dump you provided I would suggest that you check for an updated graphics driver. (uninstall the previous version first)


Code:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
Machine Name:
Kernel base = 0xfffff803`56e11000 PsLoadedModuleList = 0xfffff803`570daa80
Debug session time: Tue Mar 12 11:36:54.830 2013 (UTC - 4:00)
System Uptime: 0 days 11:17:55.653
Loading Kernel Symbols
...............................................................
................................................................
...................................
Loading User Symbols
Loading unloaded module list
............
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
******... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

Everytime my Windows 7 Home PC wakes from sleep mode, there's no internet connection. When I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?

A:No internet after waking from sleep

Maybe the Ethernet controller is getting shut off during sleep? Try going to Control Panel > Device Manager, right click your Ethernet controller > Properties. Under the Power Management tab, there should be a checkbox that you can uncheck for "Allow the computer to turn off this device to save power".

Read other 8 answers
RELEVANCY SCORE 53.2

Recently my pc keeps switching it self on from sleep mode. When it happens I switch the screen on and it's telling me it is waking up, but nothing happens. I end up having to switch it off with the button and go through a long procedure before it reboots back on.
 

A:Waking up from Sleep mode

Is the machine and monitor both going to sleep?
If so, set the monitor so it does NOT go to sleep.
 

Read other 1 answers
RELEVANCY SCORE 53.2

My computer fails about 1/4 of the time when waking up from standby (sleep). I've attached all the necessary files. Any help will be greatly appreciated.

A:BSOD when waking up from sleep

Welcome
Your minidump files have been examined. They indicate that a Microsoft driver is the culprit and this is very unlikely.
To start make a full antivirus scan, download and make a full scan with malwarebytes, and finally try to go to sleep whil not in the power save mode. Report back with the results.
If you continue to have BSODs, we will suggest other action, such as a driver verifier. We will get this problem resolved.

Read other 9 answers
RELEVANCY SCORE 53.2

I've seen a number of discussions on what appears to be a very similar problem, but no real solutions. I thought I'd try again with maybe a bit more detail.I have a Latitude 7470 running Windows 10. Display adapter is the built-in Intel HD Graphics 520, driver version 21.20.16.4627 (3/9/2017). I'm not using a docking station.I have three monitors connected: Monitor 1 is the laptop's built-in monitor Monitor 2 is a a Dell E2416H (Display port) Monitor 3 is a ViewSonic VG2228wm (HDMI to DVI cable). Desktop is extended on all three monitors. Monitor 1 is designated as the main display.
At times (unpredictably), monitor 2 (the Dell monitor) doesn't wake up with the computer and the ViewSonic monitor. Power LED is blinking slowly. Apps that were previously running on that monitor are moved to one of the remaining two. If I power the monitor off/on, the computer signals that a new device was discovered and everything goes back to normal without further intervention.
Suggestions?

A:One of my monitors not waking up from sleep

How on Earth do you even start a new thread in these bloody forums?
Where's the big giant button that every online community that has ever existed has to start a new thread? I'm forced to post here with something completely unrelated to the OP because for the life of me I cannot figure out how to start a new post.

Read other 3 answers