Over 1 million tech questions and answers.

P10 connector

Q: P10 connector

I have a question about a P10 connection on my motherboard. I bought a new power supply and the P10 connector is not the same as on the one I removed. The slot is straight with 6 pin holes. The new power supply P10 connector is square with 3 pin holes on top of 3 more. I powered up my computer and it seems fine. I would like to know if the motherboard P10 slot is necessary if you are using an AGP graphics card. Thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: P10 connector

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 42.8

Hi. I am new to building computers and have a question on fans. My case has three fans. Two of my fans have both pin connectors and molex connector attached together. How do I power the fans ?- do I need both connections?
thanks
 

A:Fans with molex connector and pin connector

The 3pin connectors are to plug directly in to the motherboard......if your motherboard does not have the 3pin connectors then plug the molex into the power supply
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hi there. Please view this item
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127063

I am confused whether or not the antenna or cable will screw onto my wireless adapter card.

My wireless Adapter card has a SMA connector on it with the screw wedges on the outside rather than inside with a pin in the middle.

Heres a photo of a similar SMA connector - http://content.answers.com/main/content/wp/en-commons/thumb/9/90/200px-Gniazdo_RPSMA.jpg

The brand of the network adapter is the same as the brand of the antenna they are both D Link so youd think they would fit.
will the antenna or cable screw onto that?

thanks, jordan
 

Read other answers
RELEVANCY SCORE 39.6

I am wanting to install a new video card. It has a VGA and a DVI output on it. The old card has only a EVC connector on it. From there it goes to a Y cable with 2 CRT monitors (VGA connections) coming off of it.

My question is. Can I use a DVI to VGA adaptor and hook both monitors to the new video card and do away with the T cable?

Thanks Bill
 

A:Can I change from a EVC connector to a VGA connector?

Most definitely. You can down convert form DVI to VGA, but not the other way around (inexpensively, anyway)
 

Read other 1 answers
RELEVANCY SCORE 39.6

I am working on a project and I have a Laptop monitor here that has a 40 pin LCD connector that I am trying to convert to HDMI to plug into an xbox 360. I have gone and looked for an 40 pin LCD to HDMI converter but all I could find was an 40 pin TTL to HDMI. Will this work? https://www.adafruit.com/products/2...2KF8Y_EOnrMVziicEfgwarUPZqSbe_j7LMRoCMFXw_wcB
 

A:Difference between 40 pin LCD connector and 40 TTL connector

Read other 6 answers
RELEVANCY SCORE 32

I noticed on a motherboard there was a 8pin connector but 4 were covered by a sticker...what is the 8pin for and is there a cable i can convert to a 8pin???

A:8 pin connector?

You only use it if your PSU has an 8 pin.

if you really want to use the 8pin here is an adapter,
http://www.directron.com/ad202.html

http://en.wikipedia.org/wiki/EPS12V

Read other 4 answers
RELEVANCY SCORE 32

Like many, I have CD-ROM problems, but mine is a little unusual. I have a 58x vanilla CD-ROM chained as a slave to a master Plextor 708-A DVD writer. Both are on the secondary IDE connector of an Asus P5GD1 board. This is the one with the RAID connector possibility on the secondary connector but the default on the Secondary connector is to IDE and I've left it that way. The two hard drives are chained master/slave to the primary and are working fine. Windows XP SP2, P4 3 Ghz, 1 GB RAM.

The CD-ROM shows up in Device Manager but freezes when I've tried to read a CD. The DVD writer works fine and will show anything when there is a disc in there. I've tried the usual workarounds, elminating the Upper and Lower Filters, removing the drives from Device Manager, zilch. In Event Manager, I keep showing Event 51 (paging error) and 11 (controller error) trying to use the CD-ROM. The Event 11 explanation says a "faulty cable" is the problem but I've changed cables twice.

What I'm thinking is that I currently have an 80-pin cable hooked up to the two optical drives and the Asus Secondary Connector which is made for an Ultra ATA 133/100/66 port and the motherboard asks for an Ultra ATA signal cable. Should that cable be a 40-pin connector rather than the 80-pin connector? Would that allow the CD-ROM to be read and will the DVD still work?

Thanks for any help here,

Neal Lavon
Takoma Park, MD
USA
 

A:40 vs 80-pin Connector

Read other 6 answers
RELEVANCY SCORE 32

I have a problem. I had an old PC running Win98, and the C drive went bad. I had some photos and music on another drive. I purchased a new computer, running WinXP. I also purchased one of the USB to IDE converters so I could plug the drive with the pics into my new system and recover the pics, etc. My system recognizes the drive being attached to the USB, but I can't seem to access the info on the drive. Am I missing something, or perhaps it's impossible to recover the pics since I'm now running WinXP instead of Win98? Any help would be appreciated, since I'd hate to lose the pics! Thanks,

Tom
 

A:USB to IDE connector HELP!!

Read other 14 answers
RELEVANCY SCORE 32

i am using the standard ATX 20 pin power connector that i am using... and is that the new ATX12v connector the 4 pin? and do i use the new 2x2 pin along with the standard connector?
 

A:PSU connector

two1361 said:

i am using the standard ATX 20 pin power connector that i am using... and is that the new ATX12v connector the 4 pin? and do i use the new 2x2 pin along with the standard connector?Click to expand...

If your board has the 24 pin connector then use the 2x2 with it.

Yes, the square 4 pin is the 12V connector to the MOBO.
 

Read other 3 answers
RELEVANCY SCORE 32

i have recently bought a psp/tv cable so i can play things on psp on the tv. the cable has 5 connectors, 1 Blue 1 Green 1 Yellow 2 Red, which of these connectors do i use in the tv? does anyonehave any suggections
 

A:psp/tv connector

Read other 8 answers
RELEVANCY SCORE 32

Does anyone know what a Y-Connector looks like? (i.e. the kind which allows you to hook up 2 computer monitors to one CPU.

For example, say there's a 3 ft. or 6 ft. Y-connector - does the split begin after 1 1/2 ft. / 3 ft. (respectively)?

I couldn't find any online diagram of same.

Thanks.
 

A:Y-Connector?

Read other 16 answers
RELEVANCY SCORE 32

I'm going to get this heatsink:

http://www.newegg.com/Product/Product.asp?item=N82E16835109118

to cool my Pentium D 830 processor. Problem is it needs its own cooling fan and I'm going to get this one:

http://www.newegg.com/Product/Showi...eeve+Blue+LED+Light+Case+Cooling+Fan+-+Retail

But the cooling fans all have 3-pin connectors. My mobo's CPU colling fan connector is 4 pin althouth it looks like it could also take a 3 pin where one pin just wouldn't be used. Will 3 pin connectors work? What's the difference?

MOBO is ASUS P5WD2 Premium.
 

A:Will 4 pin CPU connector take 3-pin fan?

Read other 16 answers
RELEVANCY SCORE 32

Hello, I'm about to purchase a GTS450 card and noticed it required one 6 pin pci-e power connector. However I only have an 8 pin pci-e power connector. Would this still work?
 

A:6 pin pci-e connector

Might check your 8 pin connector to see if it is a 6+2.
That means that 2 pins may be removable to allow
use as a 6 pin connector.
Check the cards package content list to see if it includes
a 4 pin molex to 6 pin pci express adapter.
If not,you can buy one pretty cheap.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812887001&cm_re=molex_pci_express-_-12-887-001-_-Product
 

Read other 1 answers
RELEVANCY SCORE 32

Please help.
my question:While implementing any standard bus architecture like ISA ,EISA..in our own designs ,is there any standard to be followed while selecting bus Connectors (physical) or we can use any type of connector?
 

A:ISA bus connector

ISA .. WoW that brings back memories
In theory you should follow the standard set for ISA to avoid interconnectivity problems. In practice , well if the system will be used mainly by you, then it shouldn't matter since you might be able to get away from connection problems by manufacturing your own connectors
 

Read other 1 answers
RELEVANCY SCORE 32

Hi. If I would get a PS2 to USB connector for my laptop, could I just connect a keyboard or would I have to connect both a mouse and keyboard?

Thanks.
 

A:PS2 to USB Connector

You can just connect the keyboard, the laptop mouse will still function.
 

Read other 3 answers
RELEVANCY SCORE 32

Hi, I have purchased a OCZ Stealth Xtream 500W PSU (model: OCZ500SXS2), I have also choosen a motherboard (Gigabyte GA-890GPA-UD3H 890GX Socket AM3 HDMI DVI VGA.. | Ebuyer.com) but this motherboard has a 8 pin CPU power connector and on this PSU I only see a 4 pin CPU power connector (P3):? I need to know if I purchase this motherboard will it be able to work with the PSU and power up an AMD Phenom II X6 1075T 3GHz Socket AM3 125W 9MB Cache.. | Ebuyer.com
Also read on a website:

"You can plug a 4 pin 12V cable into an 8 pin motherboard and it will sometimes work properly but other times it won't work at all or will burn/melt the connector."

Thanks in advance for the help.

A:PSU Connector help

Take look here:

Kustom PCs 4pin P4 12v to 8pin EPS Connector



8Pin 12V to 4Pin Power Cable : Internal Case Cables : Maplin

Read other 5 answers
RELEVANCY SCORE 32

Windows 10 Settings have this mysterious item.

What does the App Connector do and why does it need access to my location, camera, etc....?
Thanks,
BBDS

A:What is App Connector...?

Have a look at this article. It won't answer your question though.

Source
exceprt :
Microsoft allows you to uninstall App Connector, which seems to support the idea that it doesn’t do anything super important. If uninstalling this app caused problems with Windows 10, Microsoft wouldn’t let you do it so easily.

Read other 3 answers
RELEVANCY SCORE 32

Hi, I need to buy a connecting USB to connect the S140u Portable Screen to my HP Elitebook. I currently have the old connector which has two USB connectors at the end but my Elitebook doesn't have anywhere to connect the two.Any ideas if HP sell this separately - i've looked under the S140u "Accessories" section but they dont seem to sell it separately. Thanks in advance,Emma

Read other answers
RELEVANCY SCORE 32

I have an ABIT AX5 motherboard and am running Windows 98. The keyboard connector (PS/2) no longer works. I am wondering is there and can I connect a USB keyboard and have it work? I am in stationed in (US Army)Korea and don't have access to a repair shop (and can't afford a new motherboard).

Thanks
Dave
 

A:USB connector HELP!!!

Don't know why not, there are a lot of usb keyboards available. The only down side would be no keyboard in dos mode. Windows should be fine though. Here is a list of usb keyboards etc
http://www.usbworkshop.com/products/keyboardlist/subcat0/
 

Read other 1 answers
RELEVANCY SCORE 32

well here goes...i have a compaq presario 1900xl-163..(notebook)
and i have been trying for weeks to find the interface cables that connect the dvd and floppy to the thing....
but everywhere sofar ..nothing...

the dvd and the board it attaches to are both 50 pin female.
so the cable needs to be male on both ends...
the drive is a toshiba sd-c2302.
so..if anyone has any idea where i can find this cable it will be greatly appreciated...
ps i tried every way that i know of to get one from compaq but they are very uncooperative..
 

A:dvd connector

www.pricewatch.com has every doo-dad under the sun for computers, that would be a good place to check first. Best of all, its cheap!
 

Read other 3 answers
RELEVANCY SCORE 32

I have a Intel PII 350, 8.6 Gig HD and 128 MB of Ram. I am using Windows 2000 as the OS. I was trying to install a USB modem on my computer when I noticed that my USB connector wasn't installed properly. I uninstalled the hardware and re-installed it using the old and new drivers but still it wasn't working. When I went to the trouble shooting tab, it set that USB connecter not starting up. Would you be able to tell me what the problem is.
 

A:USB Connector

Enter the bios and make sure usb is enabled, quite possible it's not if your not using anyother usb devices.
 

Read other 3 answers
RELEVANCY SCORE 32

I need some information on the pin configuration of the PS2 connector. Looking at the connector with the Large index slot at the top "12 oclock" position, counting clockwise which pin is "Data", "Gnd", "Vcc", "Clock"? I need this information so I can set up the connector to connect to the mother board. Thank You.
 

A:PS2 connector

Clockwise from the slot...

Signal: Clock Description: clock

Signal: GND Description: Gound

Signal: DATA Description: DATA

Signal: NC Description: No connection

Signal: VCC Description: +5V

Signal: NC Description: No Connection
 

Read other 2 answers
RELEVANCY SCORE 32

I've got a Jaton brand GeForce4 TI4200 video card.
Lost the dang manual, and manufacturer's website is none-too-helpful.
Beside the blue VGA connector, there's a round connector, with 9 pins (female). It's not marked, and I initially thought it was for TV-out (S-Video), but I can't find another on the web that looks similar.

I'm hoping to use it as a TV-out, I guess I'd better figure out what it is first...
Any help will be very much appreciated.
Oh yeah, here's a link to a pic:

http://img78.photobucket.com/albums/v239/jamesl777/?action=view&current=video_card_connectors.jpg

Thanks for your time,
James
 

A:What connector is this?

Read other 8 answers
RELEVANCY SCORE 32

Me bad. Bought a new cheap MB (Biostar tforce 550) which has only one IDE connector.
But I want to connect an optical drive and a spare IDE HD.
I remember that using one IDE cable for the two could cause problems, and a hit in performance.
The first I think can be corrected by putting the HD first. But how big is the performance hit?
Does it only occur when using the optical drive?
Thanks
 

A:one IDE connector.

Read other 7 answers
RELEVANCY SCORE 32

I'm buying a new PC tomorrow, but I want to keep my 250GB IDE drive in addition to a 250GB SATA drive. The motherboard I'm purchasing has one IDE connector, but I have two IDE devices that I want to connect. There's the 250GB hard drive, and my DVD burner. Will that be possible using just the one connector? I'm not sure what they mean by that, since I know IDE cables sort of have two cables in one.
 

A:Can I do this with one IDE connector?

If the cable only has one connector then you can buy one with 2 connectors on it.

If they mean that you only have one IDE connector on the board then might be a little trickier.
 

Read other 3 answers
RELEVANCY SCORE 32

Hi, I acquired (for free) a dell Dimension E510 and it it does boot up. When I power it up, it makes a terrible beeping/whining noise and then powers down. The power indicator light starts to blink and I can't power up the computer again unless I hold the power button down for 10 seconds or I unplug the power and then push the power button again. If I disconnect the square 4 pin connector from the mobo, it does not make the beeping sound and the power indicator light stays solidly lit, Regarding the PSU 4 pin connector, I am getting 11.95 volts on each yellow wire (with a volt meter to the chassis) and (minus) - 2 volts on the black wires.
I have tried removing and replacing the cmos battery, disconnecting the modem card, hard dive. Its only when I unplug the 4-pin connector that the computer does not beep and turn off

What does the 4 pin connector supply power to?
Does it sound like the 4 pin connector is good?
Could the mobo be faulty?

Thanks, Bill
 

A:Bad PSU? What is the PSU 4-pin connector?

The 4Pin power connector powers the CPU

But it sounds as though you haven't plugged the power into the Video Card (some 3D Video cards have this, maybe yours?)
 

Read other 3 answers
RELEVANCY SCORE 32

Probably a simple answer I know.. PC stopped working, Checked power supply it was fine, unplugged everything except the p4 connector, still nothing. Ha unplugged the p4 connector now things come on. The question..Bad motherboard or cpu?

Thank-you in advance
 

Read other answers
RELEVANCY SCORE 32

Hi, I have two 7800 gt's in my motherboard. I have a Gigabyte GA-MA790X-UD4P mobo. I heard that you do not need a sli bridge connector for lower end cards.

But I boot up (both the cards are working, there fans are spinning) and the enable sli configuration box is not in nvidia control panel. Now is this because I do not have a sli bridge connector or is it possible to work without it?
 

A:Sli Connector

The 790X-UD4P doesn't support SLi, only CrossFireX. ("Ati version of SLi")
 

Read other 2 answers
RELEVANCY SCORE 32

May I direct you to my post on another forum instead of reposting it all?
http://www.hardwareforums.com/what-kind-connector-lcd-controller-21858/

It seems that either no one knows or cares to reply. Just post any replies here instead of having to sign up over there. Thanks for any help!
 

A:what is this connector

I am pretty sure that would be an LVDS (Low Voltage Differential Signaling) Connector. The fourth picture is your LCD Inverter.
 

Read other 1 answers
RELEVANCY SCORE 32

Hi guys,:wave:

I've lost my Cellphone's USB Cable/Connector.
I want to transfer photos, videos, etc. from my CP to my PC.
Is there other way of connecting my CP to my PC?

thank you very much!

regards,
portaltreaf

Note: my cellphone is Nokia N72.
 

A:My CP's usb connector

You realize this is a computer forum don't you?

Within 7 hrs you have created 5 new threads and posted 13 posts
You certainly need a lot of help :rolleyes:

I'd say for this one, buy a new cable !
 

Read other 3 answers
RELEVANCY SCORE 32

I have several HD's and DVD's that have been removed from computers.
I would like to connect one of the Lightscribe DVD's to a computer that has no workable internal slot to install the drive in.
Is there a cable that I could use to connect the IDE drive to a spare SATA connector and allow the drive to be used outside of the computer for writing a few discs.
I have found some plug in converters but would like to find a single plug to plug cable (plug into the back of the DVD drive and route the cable into a spare SATA slot/connection inside the computer.
I hope this makes sense and someone can point me to a solution.
Thanks.
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, Intel64 Family 6 Model 94 Stepping 3
Processor Count: 8
RAM: 16323 Mb
Graphics Card: NVIDIA GeForce GTX 960, -2048 Mb
Hard Drives: C: 1862 GB (1741 GB Free); D: 931 GB (81 GB Free); E: 3726 GB (3066 GB Free);
Motherboard: HP, 2B4B
Antivirus: Norton Security Suite, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 32

I am about to put together a new (simple) PC. The MB is a Biostar 6200, the processor is an AMD Sempron 2800+. The MB has a socket, which the book says allows 12v to be connected to the processor (??????). A modern PSU has such a 4 pin connector, two black, two yellow wires i.e. 12 volts. I want to use an old PSU which doesn't have the 4 pin connector. Is it necessary?
 

A:4 pin 12v PSU connector

Read other 15 answers
RELEVANCY SCORE 31.6

Just bought a new IDEACENTRE 700 - 90ED0009US from Best Buy and I would like to upgrade the anemic 250 watt power supply but noticed I have a 10+4(cpu) pin connection to the motherboard. I have found 24 to 14 pin but nothing of this sort on the boards. Anyone have any idea on adaptors or the pinout of the 10 pin so that I can make my own?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

A:IdeaCentre 700 - 10 Pin Atx Connector?

hi jegillis,
 
Welcome to the Forums.
 
I don't have the pinouts on the 10pin connector that's used on the IdeaCentre 700 motherboard but I looked around the net and you're right, there's no one selling a lenovo 24pin to 10pin ATX adapter cable yet, however, I have high hopes that this cable should work:
 
PSU Main Power 24-Pin to 18+10-Pin Adapter Cable (30cm)
 
I would recommend you contact the seller though to ensure compatibility.
 
 
Let me know if this works for you.
 
Regards

Read other 9 answers
RELEVANCY SCORE 31.6

ALOHA,

I have "VIVIDENCE CONNECTOR" on my computer. What is this and how can I get rid of it.

MAHALO PLENTY,

Kalikokat

A:Vividence Connector

Hi there

Please download Adaware SE and install it if you don't have it already. Make sure it's the newest version and check for any updates before running it. Go to this site to get the plug-in for fixing VX2 variants. Also make sure to customize the settings in Adaware for better scan results. Run the scan and fix everything that it finds then........................

Please go into Windows Explorer, click on C:\ > File > New Folder and call it HJK, or another name of your choice. Go to this site and download Hijack This. Install the program into the folder you created then run it. Click Scan. Save the log file to Notepad, then copy and post it back here. Make sure to include the System information at the top of the log as well.

Read other 1 answers
RELEVANCY SCORE 31.6

The more I learn about this stuff, the more bewildered I get.

I have a couple monitors that have both VGA and a DVI-D ports.

I was looking at DVI X HDMI adapters and found that many of the ones I see are DVI-D 24+1 with 24 pins and a blade.

The DVI-D cable connector that fits my monitors has only 18 pins and the blade, with two sets of 9 pins and a vacant space in between.

I guess I could move a bunch of stuff, dis-connect all the cables, and turn one of these monitors bottom-side-up to see if there are six unused pin-holes; but I figured it would be easier to just ask those far smarter than me.

Will a DVI-D 24+1 connector connect to the DVI-D 18+1 port on these monitors and work, or are they a horse of a completely different color ?

Thanks for reading.
 

A:DVI Connector Compatibility ???

Read other 9 answers
RELEVANCY SCORE 31.6

I have a ps/2 mouse and a usb laptop. I got a ps/2 to usb connector. and enabled bios to accept ps/2 and turnoff touchpad, but the laptop doesn't recognize the mouse and doesn't turnoff the touchpad. Please help

A:ps/2 mouse to usb connector

You probably need something that connects and converts PS2 to USB, like thishttp://www.usbgear.com/USB_TO_PS2_CONVERTER/

Read other 4 answers
RELEVANCY SCORE 31.6

I am using Outlook 2007 and the Outlook Connector to pick up my email, and everything has been going fine until I tried to start Outlook today. I get a message box entitled Microsoft Office Outlook Connector, and containing the following text:
To continue accessing your mail using Microsoft Outlook, you must upgrade to the latest version of Outlook Connector.
\if you choose to upgrade now, Microsoft Office Outlook wil close and restart.
(Upgrade Now) (Remind Me Later)

OK, fine, great. So I click Upgrade Now and Outlook closes, and when I start it again - same dialogue box. I tried System Restore, then using the Office disk, Repair option, then Remove, then Install, all to no avail. Anyone got any ideas on this?

A:Connector Loop

I have the same problem exactly, started this morning, tried to repair, remove and install, nothing's working.

if anyone has any lead on this one, please assist

Thanks

Read other 9 answers
RELEVANCY SCORE 31.6

Right. I bought a 120 mm fan salvaged from some old server system from my friend with a Coke. It has this funny 2-pin power connector. Any way to connect it to a MB with only 3-pin connectors free? Can I just match the 1st pins and try it out? Would this hurt my system by chance?
 

A:Solved: 2-pin fan connector

The third wire is generally for fan speed control, so it should work with 3 pin header.
 

Read other 2 answers
RELEVANCY SCORE 31.6

I just noticed that Outlook 2003 shortcuts folder had a Windows Live Login page. Is it installed by default while doing Microsoft Updates? I'm running XP professional SP 2.
 

A:Where did Outlook Connector come from?

if you have it on your comp at moment it configures by default

http://forums.techguy.org/business-applications/832337-ms-outlook-connector-how-setup.html
 

Read other 1 answers
RELEVANCY SCORE 31.6

ok so i have a 2pin spdif connector going from my graphics card to the sound card. i can't seem to get audio though. i have tried the spdif cable both ways. i have enabled spdif in the audio control panel to. i tried to disable the onboard audio in my bios but that didn't work either. gpu is a nvidia geforce 9600 gso and the sound card is a asus xonar dg. i have a pentium d dual core processor and 2 gigs of ddr2 4300 ram installed as well. the motherboard is a d945gccr. i am sure i missed a step somewhere.

A:spdif 2 pin connector

Just to clarify, you're routing sound from your sound card, into your video card, with the intention of feeding that audio into an HDMI cable to a monitor with speakers? Are you using an HDMI cable? Or perhaps I am missing something?

Read other 5 answers
RELEVANCY SCORE 31.6

I finally got here... I have a simple problem. I use a Acer XP, Office Outlook 2007, which was working well lately. Suddenly, my Hotmail messages don't come in my Outlook Box anymore (3 days). I need simple instructions as I do not understand all the techno instructions, and I am French.

Thank you so much for you help

Alizée
 

Read other answers
RELEVANCY SCORE 31.6

I recently purchased a wife antenna and a wifi router to hopefully be able to use my laptop at my boat in a marina that doesn't offer wifi. I found that the cable coming out of the antenna end with a male sma connector while the input to the rear of the router utilizes a lan connector. I looked on line to see if I could find a wifi router that took this type of connector and found none, while almost none of the antennas offer anything but the sma type connector. Why are these devices made with incompatable components? Is there a solution such as a sma/usb or sma/lan connector or should I start over again? the wifi router is a Netgear and I thought I may be able to unscrew the antenna off the back, but it doesn't seem to budge and I'm afraid i'll break it.
 

A:sma/lan connector for wifi

Read other 7 answers
RELEVANCY SCORE 31.6

When I first installed a new lcd monitor with a digital connection to an also new video card (nvida 7600 agp), a small rectangular icon would appear during boot process. It shows a picture of a DVI connector along with DVI letters. The thing is lingering longer and longer now, well into windows (XP pro) being loaded and longer. Can anyone explain to me what is going on and how might I help it find what it's looking for...if that's what is happening ?
 

A:DVI connector icon

It's the monitor. When you shut it off, it doesn't fully shut down does it? Shut down the monitor and unplug it for a few minutes, then try it again. Maybe it will be better, maybe it won't.
 

Read other 3 answers
RELEVANCY SCORE 31.6

In the device manager I get an error for the network connector. It says drivers have not been loaded. Can anyone tell me where to get the drivers? Thanks.
 

A:Network Connector

Read other 7 answers
RELEVANCY SCORE 31.6

Since I downloaded windows connector in outlook 2007 I have to keep restarting my computer to get my email. Seems the desktop icon path has been corrupted. Someone please advise I need the connector now because of email sending while I am on vacation. It also makes outlook frezze during send/receive.
Thanks so much

Read other answers
RELEVANCY SCORE 31.6

I am trying to use a USB to PS/2 convertor for my keyboard(My mouse one isnt working to but It runs fine threw USB), so it wont be as slow, but I think I am missing all my files for the PS/2 connector, if I need files, where can I download them, if I dont need files, how do I fix the connection? The convertor is not borken.

Thank You.
 

A:PS/2 connector missing?

Read other 8 answers