Over 1 million tech questions and answers.

HP Thunderbolt 3 dock stopped working

Q: HP Thunderbolt 3 dock stopped working

The thunderbolt dock was working. I was gone for a week. Came back and plugged laptop into dock. No longer works. The dock will charge the laptop, but none of the devices are recognized. Drivers are up to date.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: HP Thunderbolt 3 dock stopped working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 78

I used the Lenovo System Update (v5.07.0074) and was prompted to download and install (was listed as Critical Update) the Firmware to my Dock.  As always, I closed all applications and sat as the Firmware downloaded. I got the expected prompt to ensure I was plugged in. I then watched as the upgraded prompted me to install. Installation completed and everything appeared to be fine.  I powered down the thinkpad and disconnected. Worked from the living room, then went back to the dock. Connected, and noticed that before I connected the White light on the power button was illuminated. Shrugged, and pushed the power button. Nothing. I un-plugged the Dock, got a cup of coffee, returned and plugged it back in. Nothing. I then noticed that none of the pass-through power was working on the dock.  So, I unplugged it again.  Unplugged everything connected to it, and held the power button down for 15 seconds in an effort. All of this at the recommendation of Lenovo Support. Who, by the way, was very nice and well spoken. Nothing we did worked. I happened to have another Thunderbolt 3 cable in my bag, and no change. I powered up my new X1 Yoga, and connected the cable. No power. This wasn't passing power at all. I confirmed the Intel Thunderbolt app was running, and confirmed that Windows was not even detecting the Dock.  Lenovo is sending me a replacement. I had this one all of a week. Did I miss any other steps while I wait for it to be repl... Read more

Read other answers
RELEVANCY SCORE 75.2

Since the last Thunderbolt firmware update the DP ports no longer work. No matter what settings you try, no signal is detected. The only way to use monitors now seems to be to use the front USB-C port and connect it to the first monitor and then use DP daisy chain from monitor 1 to monitor 2. We have 2 Thunderbolt docks with the Update installed and both have the issue. We have one with the stock firmware and it works flawless.  Anyone else having the same issue? Any idea how to fix?

Read other answers
RELEVANCY SCORE 75.2

Hi, I have a T480 Type 20L6 Thinkpad (20L6S7PC0J)Today i recieved a Thunderbolt 3 Doc type 40ACMonitor is connected to VGA port.  The only thing it is doing is charging my laptop and providing me display. .All other USB ports are not working. My Keyboard/mouse is not getting detected.  Need a solution.  Regards,Aamir Mehboob

Read other answers
RELEVANCY SCORE 75.2

I just installed the latest set of drivers. The dock still does not connect to my XPS 15- 9550.
This process has gone on for two months.

A:Thunderbolt TB15 Dock still not working

Return it. No amount of software/firmware updates is going to make this device good. It has several hardware issues.

Read other 3 answers
RELEVANCY SCORE 75.2

 Hello all, I am a solutions architect trying to solve an issue which I have never heard of before. Though others users are having this same issue, my experience has been different then what they have seen. First,The following are the Security options for Thunderbolt devices as per user guide

No Security: Allow Thunderbolt devices to be connected automatically.
User Authorization: Allow Thunderbolt devices to be connected after user authorization.
Secure Connect: Allow Thunderbolt devices to be connected with a saved key that has been approved by the user.
Display Port and USB: Allow only DisplayPort-compatible devices and USB devices to be connected. Thunderbolt devices are not allowed to be connectedI don't think this is entirely true or at least does not apply properly each time. My scenario:T480, T580, or Yoga x1 3rd genImaging with a standalone MDT environmentDevices come pre-configured from Lenovo with Thunderbolt 3 Security Options set to "User Authentication" Installing all the drivers in the latest SCCM driver packs that Lenovo offers - though the x1 3rd gen driver pack was missing on the site this morning. On some devices, this security option seems to do absolutely nothing. MDT uses the local "Administrator" account to perform post-OS items. I'd say about 75% of the devices reach their destination and the user logs in for the first time as a user, not an admin, and the dock functions properly; monitors/mice/keyboard/etc. work. 25% of ... Read more

Read other answers
RELEVANCY SCORE 75.2

I have had my T480s and the basic docking station for about 6 months.  I love the laptop!  This week I added the ThinkPad Thunderbolt 3 Dock Gen 2 to improve the overall experience - multiple monitors, etc.  However, now my microphone doesn't work.  Do I need to use an external mic connected to the dock or can I get the laptop mic to work again?  It took a while to get the speakers working again, but the mic still isn't working.  I routinely have teleconference calls over the net, so this is rather inconvenient.  Please help!      Thank you!

Read other answers
RELEVANCY SCORE 75.2

If I put my computer in "Sleep" mode and turn it back on, I can never get the dock to work again. I have tried to upgrade BIOS and drivers as described in several posts, but it doesn't work. The only working solution is to restart the computer. Has anyone got the same problem?

Read other answers
RELEVANCY SCORE 74.4

Hello,  I just bought a X380 and a Thunderbolt 3 dock and it seems that even if I updated the driver to the latest one, my dock is still not working to provide power supply to my laptop via the USB C Cable. It has different error messages: 1. plugged in, discharging2. plugged in, not charging3. it is plugged it, it shows like it is charging but it is not.  I don't know what to do anymore and I would really like to work. Could you please advise?Also, my battery is draining, from 100% to 86% in 10 minutes without heavy usage.  Thank you for your help! 

Read other answers
RELEVANCY SCORE 74.4

Hi, I am using a Thinkpad X1 Carbon from 2017 with a Thunderbolt 3 Dock. I use Bose deskopt speakers through the audio jack. Everything was working smoothly, then suddenly the audio isn't working at all. Says my drivers are up to date.  No idea what is wrong and not very savvy at all this. Thank you for any help. Much appreciated. 

Read other answers
RELEVANCY SCORE 74.4

After a long series op updates and firware upgrades we still encounter much trouble with the HP Thunderbolt Dock's Recently (7-2-2017) we installed a new HP ZBook G3. We always reinstall our ZBook G3's with a 'clean installation' of Windows 10 and the required HP Drivers. After adding de required software on this laptop our nightmare begins... Unable to attach usb keyboard or mouse on the Thunderbolt Dock and after rebooting a few times even windows crashes.Once you detach the dock,the coputer will eventually start again and will work as it should.Any attempt to unload update drivers and reinstall have no effect. After contacting HP support we received a link Troubleshoot Thunderbolt 3 Dock.In this document they descrbe a specific order in which to install you drivers. Since we already tried this in all our previous problems with the dock, i was getting somewhat despirate...Untill yesterday where i stumbled upon a message on the HP forum including the use of Citrix Client Software which happens to be so in our case. After a clean installtion of Windows 10 and installing the drivers in the required order like described in the Thoubleshooting documentation the Zbook and thunderbolt dock both work fine.Then i installed the citrix receiver 4.6 software and al my troubles were back after a reboot. I removed the Citrix Client and now everything works perfectly. The next challence is to get Citrix working again........... Read more

Read other answers
RELEVANCY SCORE 74.4

I have an HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I recently updated the BIOS and firmware to the latest version to fix other "dock" issues.  Am now at the latest for both.  The dual monitors and ethernet over the Thunderbolt 3 work, but none of the USB ports are active. I'm certain the USB ports work, becuase they used to work prior to the BIOS and firmware update.  Neither keyboard, mouse, or USB memory work in the dock. I've tried going to HP support and installing any of the updates with USB in it, but it hasn't worked.  I have a workaround--just plugging in to the notebook directly, but would like to get my dock fully functional. The Device manager doesn't show any devices with issues.  I'll try to update, but I don't know which one to look at. 

Read other answers
RELEVANCY SCORE 73.6

Received Thunderbolt 3 dock for my X1 Yoga 2nd Gen.It's charging the Yoga, the two displays are working.ALL the USB and ethernet ports are not.Did the updates, restart, repower of dock and Yoga.I know the ethernet is good because I have been using an USB to ethernet directly connected to the yoga.Yes I disconected the USB to ethernet adapter when trying the ethernet port on the dock. 

Read other answers
RELEVANCY SCORE 73.6

I purchased the Thunderbolt 3 Dock with my Yoga 920 as it was listed as an accessory during my Yoga 920 purchase back in November.  I finally got around to setting it up and I can't seem to get the power button the dock to turn on my laptop.  The button glows white when my laptop is plugged in but the button will not turn the laptop on.  I have my power button option in Windows set to "when i press power button while plugged in, the laptop will go to sleep."  So even while the laptop is connected to the dock via USB-C/thunderbolt and the laptop is on, when I push the power button the dock, it doesn't put the laptop to sleep either--it does nothing. Googling around, I see there is a newer dock called USB-C dock and it's listed as compatible with the 920 whereas as the Thunderbolt 3 Dock is not listed as compatible.  Could this be the issue?   I also have thunderbolt software installed and it detects the dock in the software. I need some help please!

Read other answers
RELEVANCY SCORE 72.8

HiI have 2 Lenovo devices:-Lenovo ThinkPad X1 Yoga, i7-7500U, 16GB, SSD 512GB, WQHD OLED 14inch touch, LTE, W10P-Lenovo ThinkPad Thunderbolt 3 Dock - Port Replicator - (Thunderbolt 3) - GigE-And i have 2 monitors whit a DisplayPort connection. These are connected with the dock. What i try to do:I wont to work whit these 2 monitors and whit the monitor from the X1 Yoga itself. My Problem:It only works with 2 screens at the same time...- If the laptop is open. I can work whit the screen from the notebook and wiht 1 external monitor.- If I close the laptop. I can work whit both external monitors.- But when I open the laptop again. 1 Monitor turn into black. I updated everything whit the Lenovo System Update Tool. Everything is up-to-date.Also the Windows Updates are Up-to-date.Manually checked from the Intel website, also everything is up-to-date. Is there anyone else having this problem? Any advices?Thanks a lot & Greetings   

Read other answers
RELEVANCY SCORE 72.8

Hi,I have X1 Carbon 5th Gen. When I connected ThinkPad Thunderbolt 3 Dock to my notebook fingerprint reader stop working. After it i tried to disconnect dock, restart my laptop, fingerprint reader started to work fine. When I connect dock again fingerprint reader stop working.

Read other answers
RELEVANCY SCORE 72

Not able to get two monitors (Samsung S27E450) plugged into a ThinkPad Thunderbolt 3 docking unit to work with my X1 Yoga (Gen 2).   Montiors connected to docking via DisplayPort cables.   Windows 10 shows the monitors showing up as "Generic PnP" so something is being recognized.  Tried deleting the device in Device Manager, reboot.  Not finding the drivers on the Samsung site.   Any help appreciated. 

Read other answers
RELEVANCY SCORE 70.4

I have been experiencing issues with my USB keyboard on my XPS15 9550 w/TB16 Dock when the Logitech G610 USB keyboard is plugged into TB16 USB 2.0 port in the back.
The keyboard will hang, accepting no input. or may hang on a certain letter, thus producing an "aaaaaaaa" across the screen until the keyboard "comes back".
Keyboard seems to work fine while plugged directly into the XPS15 rather than the TB16.
I also have an external USB drive for backups that I use connected to the TB16, although seems to be functioning fine. I have not had a backup fail, so, I assume it is working fine.
I have tried downloading all of the drivers, and re-installing them in the proper order according to the documentation while disconnected from the TB16, and then connecting to the dock.

Is anyone else experiencing a similar issue?  Is it the dock or the 9550?

A:USB Keyboard Hangs/Quits working on XPS15 9550 and Thunderbolt Dock TB16 . W10Pro x64

If you happen to run Citrix Receiver, make sure you're running at least version 4.9, since earlier versions are known to cause USB issues with the TB16, although that typically presents as the USB ports not working at all.  If not, then there was also an issue with intermittent USB device disconnects that was eventually solved through a combination of drivers and firmware, so when you say you've downloaded all of the drivers, please confirm that includes:
- BIOS
- Thunderbolt firmware
- Thunderbolt software
- ASMedia USB Host Controller driver

Read other 5 answers
RELEVANCY SCORE 70.4

Hi all, In the past few days my laptop slowly degraded, starting with docking station connectivity not working (but does work with other laptops), then HDMI port not working (HDMI screen and cable works with other laptops), and now system no longer charges. Current status is that all USB-C ports (including charge) and HDMI port and not functioning. Computer doesn't charge when it is off, too.  I've looked at multiple solutions and threads on this website without any real solution. I've already tried - - run Lenovo Vantage a few times to check updates. Did the same on the Lenovo product website (using auto-discovery of serial #), everything is fully updated- Turned on/off Thunderbolt Service (on the Windows 10 control panel) - I turned it on and automatic but it always returns to Manual- Searched in the Device Manager for Thunderbolt (anything) - it's not there- Uninstalled and re-installed Thunderbolt software from the Lenovo website (both controller driver and FW, file names n1nta05w.exe and n1nth08w.exe)- Went to the BIOS/Configuration - enabled and disabled again all Thunderbolt related options - Used Paperclip to do hard reset using the emergency reset button Any ideas what left to be done?  Thanks!  

Read other answers
RELEVANCY SCORE 70

Hello everyone, I recently bought a Thinkpad X1 Extreme and I am now locking for a suitable Thunderbolt 3 dock. Although I've read a lot of posts about various docks I am still a little consfused about which one to choose. It seems like the following ones would all work with the X1 Extreme:1. Lenovo ThinkPad Thunderbolt 3 Dock Gen 2 135W:https://www.lenovo.com/ca/en/accessories-and-monitors/docking/universal-cable-docks-thunderbolt/Thun...2. ThinkPad Thunderbolt 3 Workstation Dock (170W):https://www.lenovo.com/ca/en/accessories-and-monitors/docking/universal-cable-docks-thunderbolt/Thun...3. ThinkPad Thunderbolt 3 Workstation Dock (230W):https://www.lenovo.com/ca/en/accessories-and-monitors/top-tech/Thunderbolt-WS-230W-dock-US/p/40AN023... Please correct me if I am wrong but to me it seems as if the only difference between these docks is that the workstation ones come with two AC adapters each and a special Thunderbolt/Power cable to avoid using two different cables. Or are there any other technical differences? So if I am okay with a two cable solution couldn't I just use the Lenovo ThinkPad Thunderbolt 3 Dock Gen 2 135W and connect it via Thunderbolt while at the same time use my 135W AC adapter to charge the laptop? Thanks a lot in advance.

Read other answers
RELEVANCY SCORE 68

Hi All I have been crawling through these forums and Google in general, it seems a lot of people have similar issues. I run a T470s, I use a Startech USB-C to HDMI adaptor allowing me to connecto to 2 external monitors. I have done for many months and all was fine. I recently ran system update and found multiple drivers needed updating, I ran this and since I cannot use my external monitors.  Thunderbolt software is up to date, as per screenshot it doesnt show the controller version or details in lower half. Device Manager doesnt show the controller at all (even hidden devices). I have tried:uninstall/reinstall of TB SWrunning the firmware update tool but that just says 'No Active Controller' in the system.I have tried reinstalling every Intel driver availablethe BIOS was updated by System Update previouslyI have checked the BIOS settings and everything is enabled I found a system restore point from a few days ago which I think is before this started, rolling back to that allows the TB3 SW to show the controller version and a device showing in Device Manager but my monitors still dont work. A further reboot without changing anything takes me back to 'None' controller version and nothing in Device Manager. Open to the idea it could be my adaptor has died, I understand you sometimes need a TB3 device connected to update the FW (?) but I do not have any other devices, hoping to try my adaptor on another machine at head office next week to ... Read more

Read other answers
RELEVANCY SCORE 66.8

My docking station just stopped working. It will power the computer but none of the ports operate. I saw online others have had the same problem, but I can?t find a solution. Yesterday, I unplugged the station so I could plug the computer into a new router. That worked fine, but when I plugged it back in on my desk, now I can?t use my second screen or mouse.  Naturally I?ve tried turning everything off ? completely off- and back on again.  The laptop and dock are both just a few months old. Laptop is Elitebook 1012 X2, and the dock is usb-c, product ID T3V74AA running Windows 10 64bit.

Read other answers
RELEVANCY SCORE 66

In the morning today I got a notification from Lenovo Vantage that a new version of BIOS is available for install. I went ahead and installed, restarted and my dock isn't working. Tried to plug in a monitor into the TB3 port, also didn't work. I went into BIOS and turned on BIOS assist for Thunderbolt but it didn't have any effect. Anyone else is experiencing the same issues? Thinkpad model: 20MF000DUSBIOS version: 2EET36W 1.1820MF000DUS

Read other answers
RELEVANCY SCORE 65.6

I've bought TB16 and update all drivers (Dell Assist does it) and after lowing network settings to 75% my DELL monitors flickering less but now I have major issue since my Dell Adapter - USB-C to HDMI-VGA-Ethernet-USB stop working completely. When I plug in nothing happens (yes, adapter is working properly and yes cables are correct)
In first few days, randomly, Windows was enable to turn on output to adapter (after hour of plugin, plug out same adapter).
Now, it's completely useless. 
Can anyone help, any suggestion ?

Read other answers
RELEVANCY SCORE 65.6

The docking station of my spectre no longer gets any power or isn't recognised by the main part of the computer. Everything else is fine and I can still use and charge up my Spectre through the touchscreen and use it as a tablet but I have no access to USB drives or keyboard.

A:HP Spectre x2 dock/keyboard etc has stopped working. How to ...

 Check your warranty status Here. Contact HP to arrange for warranty service on your notebook.

Read other 1 answers
RELEVANCY SCORE 64

Anyone install the "ThinkPad USB-C Dock - Type 40A9" and be able to maintain the use of the internal Realtec Microphone Array? I'm at the end of my ability to diagnose it.  Drivers and device manager settings all look enabled and correct but I lose ability to use internal mic.

Read other answers
RELEVANCY SCORE 64

Hi, I have just received the HP Elite Thunderbolt 3 65W USB-C Dock. I have plugged it in, and my Elite X2 1012 G1 charges, but that is all. None of the ports are working. Monitor is not recognised either. If I plug my phone in via the USB port, it will charge, but not recognise it as a storage device. I have searched everywhere, and cannot find drivers that will resolve this issue. I have:- Thunderbolt software installed, and running, but still to no avail.- Installed and run "Intel Thunderbolt Firmware Update Utility", but get an error that there is no controller driver. Please help. ps. The machine was reimaged with a corporate SOE. So I am not sure if I am missing drivers. 

A:HP Elite Thunderbolt 3 65W USB-C Dock not working on Elite X...

I finally received our Thunderbolt 3 docks this week.  Same issues as OP.  I was able to get it working by installing the Intel Thunderbolt Secure Connect under the Driver - Controller section of the drivers for the X2 1012 tablet.  Hopefully this helps someone else.  Direct link to the driver page below. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8741946&swItemId=ob_161921_1&swEnvOid=419...

Read other 6 answers
RELEVANCY SCORE 62.8

To back up Dell-Brian B's threads you can find all the available Dell documents for the Dell Dock and Dell Thunderbolt Dock here. 
TB

Read other answers
RELEVANCY SCORE 60.8

HP ZBook Dock with Thunderbolt 3 usb device issues. USB Keyboard randomly sends a stream of a repeated character.  I will be typing and mid worrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr d will get results like in the word above.  The inverse happens alot too, were it just drops a few characters i have typed. USB Mouse lag is horrible. Both devices will stop functioning, need to reboot the dock to recover them. Any one have any suggestions or which drivers are the most stable?

A:thunderbolt dock

#HPExpertDayYou will have to update BIOS/Firmware if any. Install the docking station drivers. Try using a different keyboard, if the issue stops then issue was with keyboard.http://support.hp.com/us-en/document/bph07165

Read other 5 answers
RELEVANCY SCORE 60.8

I would like to connect my iMac Screen (Thunderbold connection with the flash) with my Notebook, however the generation 2 does not work, whereas generation 1 would work. What do I have to do? Thanks.

Read other answers
RELEVANCY SCORE 60

Love the concept of the thunderbolt 3 dock, can't fathom how it was designed though.  On my zBook 15 G3, the power and thunderbolt ports are on the right side of the laptop.  The dock has the cable port on the left rear side, completely crossing over all the ports when you put the dock on a desk with the back facing away from  you.  Then they ship a cable that is barely long enough to put the dock directly behind the laptop and connect it.   Where do I buy a longer cable HP, please!

Read other answers
RELEVANCY SCORE 60

I connected my P1 to my existing Thunderbolt 3 dock and to my pleasant surprise, the system was in charging mode when the system was off. I thought that the unit could only charge through the slim power connector port, but it seems that it will also charge through the Thunderbolt 3 port when the system is not running.

Read other answers
RELEVANCY SCORE 60

I have a new ZBook G3 17" with ThunderBolt 3 dock station.I have install my laptop with boot up finger&password protection.I have connect display, keyboard and mouse to this dock.Every time  I bootup, I have to open laptop to insert access data.This look like a stupid solution compare the old HP docking station that I have on my HP 8760W where dockingstation are working from first second and I can insert my access data (password) without opening lid.There are any solution to this problem ?I have also another problem. On the old PC was possible create a protected area of HD using a little part of it withHP ProtectTools. This SW is not possible to install on ZBook G3.I don't found any solution to create it. Only using Windows 10 (that I don't want to use) functionality.More we go on and worst SW/HW are delivery to user. AC

Read other answers
RELEVANCY SCORE 60

Just bought a Lenovo soga s730 (in other countries it can be called 730s) and Omen accelerator by hp, there are several problems, the first one: the dock connects only from the second time (the first time it detect the thunderbolt connection, but then driver just turns off, the second time everything is ok); Second: the video card appears in the device manager, but the driver does not automatically turn on, the reboot helps, then everything starts working. The last most annoying problem is that there is no charging through the thunderbolt connector, the dock is in SELF POWER status. Screenshots attached.

Read other answers
RELEVANCY SCORE 60

Is the new ThinkPad Thunderbolt 3 Dock compatible with P50? Dock details page (https://pcsupport.lenovo.com/cz/en/solutions/acc100356) only list P51s, but not P50. But P50 claims support for Thunderbold 3. If yes,  can I connect Ethernet LAN over the dock? And what driver I need to install?    

Read other answers
RELEVANCY SCORE 60

Currently have an X1 Carbon 5th Gen - 20HR, that is experiencing susbtantial issues with the Thunderbolt dock now.  I'll start with some initial info to set the stage. -----------------------X1 Carbon 5th Gen - 20HR Machine TypeWindows 10 Pro - 1903 - build 18356.21Thunderbolt 3 dock, dual Display (thinkvision P24Q), one hdmi and one display portAll updates for windows and lenovo, using thinkvantage tool.  Including latest thunderbolt firmware deployed yesterday (v.17.0.0.1).Problem device - PCI-to-PCI bridge - version 10.0.18356.1----------------------- Symptoms.Starting about 3 weeks ago, started experiencing an issue where by if I start the laptop off the dock, and plug in to the dock, none of the USB devices connected to the dock will work.  The displays work fine, but none of the USB devices do.  Such as camera, keyboard/mouse, external HD, etc. Upon opening device manager, I will always see a PCI-to-PCI bridge device in a non functional state, stating the driver has failed, subsequent attempts to update driver or completely uninstall all PCI-to-PCI bridge devices and rediscover them won't work.  Nothing fixes the issue but a reboot with the dock connected. Even with the dock functional, I now experience a strange issue whereby one of the two monitors will randomly flash (meaning go black and than almost immediately come back on). If I start the laptop on the dock, disconnect, and reconnect, I still have the same issues.&... Read more

Read other answers
RELEVANCY SCORE 60

As the only docking solution available and moving from a more traditional dock, its less than suitable.  HP needs to make a longer cable and the end that connects to the laptop should be at a right angle.  The cable is so stiff and thick it takes nearly 4" to make the turn.  HP makes it impossible to find this out how long the cable is with out purchasing and at that point your stuck with it.  Hardly a customer satisfaction issue they should want to propigate!

Read other answers
RELEVANCY SCORE 60

So I have an X1 Carbon Gen 5 (Kaby Lake) and the Thunderbolt 3 Dock Gen 1 (40AC0135US). I bought two 4k monitors and after several frustrating hours figured out that the Gen 1 dock can't output 4k on two externail monitors at 60hz, this appears to be a dock limitaion only. I see that you now have a Gen 2 dock (40AN0135US) that says it will do 2x 4k @ 60hz, only problem is that every compatability cross refrence I can find does not say the gen 5 X1 Carbon supports this new dock. I don't see a good reason for it not to be compatiable, but wanted to find out for sure one way or the other before I bought it, as it is not cheap. 

Read other answers
RELEVANCY SCORE 60

https://support.lenovo.com/us/en/solutions/acc100356 Hello I have the new X1 carbon laptop (5th gen).  I also have two 24 in thinkview external monitors with hdmi/display port inputs. If I buy the above adapter will I be able to run the two external monitors in extended mode so I have can have three different screens  total (laptop screen, monitor_1, monitor_2)?  

Read other answers
RELEVANCY SCORE 60

For some reason, i can't turn on my new P51 using the power button on the Thunderbolt 3 dock.   I'm sure i've got something hooked up wrong, but thought i'd check here.   Is there a setting in Control Panel (power button) that i need to change?  In order to use my laptop / view from my external monitor, i have to open the lid to the laptop, power on and then i can use the external monitor.  thanks for any help. 

Read other answers
RELEVANCY SCORE 60

So I have a Precision 5510 laptop with Xeon processor, no 4K screen.  My question is about this thunderbolt dock TB16.  I have one HDMI out and was asked if I can make that work on 3 external monitors.  None are 4K.  Is that possible?  Can it function as extended desktop, not duplicated? And if so, is that 3 external plus laptop? Or is the laptop screen on of the 3? 

A:Thunderbolt Dock & 3 Monitors

Depends on resolution - see this article for more information:
www.dell.com/.../SLN301105

Read other 1 answers
RELEVANCY SCORE 60

Hi,
I've seen that the Thunderbolt TB15 Dock is not valaible anymore in Italy due to hw problems. Do you know if a new one is arriving?
Thanks

Read other answers
RELEVANCY SCORE 60

Hello all,I bought a Yoga X1 2018 and during the shop they suggest the Lenovo Thunderbolt 3 Dock. Since I thought that having to disconnect only one cable when bringin the laptop from the desk to the meeting room would have been useful, I bought it.With my disappointment I setup everything and I did some tests on the laptop just to discover that the performance of the laptop when powered through the docking station are 1/3 with respect to when it's powered by the 65W power supply and 1/2 of when the laptop is on battery... (234pt vs 640pt vs 563pt | dock/65W/battery)Now since the docking station has a 135W power supply, I really can't think that this is an issue with the supply from the docking. Also since the laptop is even faster on battery I really don't understand how it could be related to the power supply... anyway I've connected both the 65W power supply and the docking and the performance are back to normal.Is there anyone who can suggest me what's going on or how to report this to Lenovo?

A:Thunderbolt 3 dock & Yoga X1 3rd gen

Hello,i have the same setup (X1 Yoga 3rd Gen + Thunderbolt Dock)  and dont experience less or different performance.I have 2 monitors with display port and couple of USB devices connected to the Dock. Also using 2 external and the Yoga monitor at the same time was never a problem.What tests have you done to measure the performance?best regards,AT

Read other 2 answers
RELEVANCY SCORE 60

I have a Yoga 370 (Win10) and a Thunderbolt 3 dock & Thinkpad USB-C dock and i cannot get them to play nice. I am using the USB-C cord on both devices, it transmits video and power but not USB or Ethernet. I have downloaded drivers and firmware from Lenovo and still no luck, the computer does not see the dock BUT the video and power are there. I changed my BIOS settings per the firm ware update well and no luck. any help would be much appreciated!

Read other answers
RELEVANCY SCORE 60

I just picked up the TB3 dock and all seems to be working, however it is not charging my laptop using the included Thunderbolt/Power combo cable. The power light shows on the dock, and connected devices work on laptop, but no power. Any ideas?

Read other answers