Over 1 million tech questions and answers.

Can you get a Precision T1700 desktop to boot to a SSD NVMe PCI Express card

Q: Can you get a Precision T1700 desktop to boot to a SSD NVMe PCI Express card

I recently got a Intel 750 PCI Express card and was hoping to make it the primary drive in my computer. Does anyone know how to configure these in the bios to be bootable. I have played around with setting the Bios to use UEFI, but it still won't see the drive. I can see the drive configured in its PCI slot, and my old windows setup can see the drive and use it. But I do want to make this drive bootable...
any help greatly appreciated

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Can you get a Precision T1700 desktop to boot to a SSD NVMe PCI Express card

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 88.4

Greetings,
I would like to upgrade my Precision T1700 graphic capacity.
I was wondering whether it could be possible to simply add a new graphic card and keeping the present one.
I have Nvidia Quadro K600 1GB installed and I am inclined to buy a 4GB Nvidia Quadro K2200.
I would be mostly thankful for the precise and precious advice.
Thank you in advance.

A:Dell Precision T1700 second Graphic Card

This is not supported.  No you cant do that.

Read other 2 answers
RELEVANCY SCORE 87.6

Hi , 

I was wondering what graphic card can i buy to this OEMs both are MiniTower, can you reply me these questions?
1. If T1700 and 9020 have 6pin PCI-E connector?
2. Can I buy GTX 1060  ?

Sorry for my English :( But I understand reading but i have problems with writing 

Thanks!

Read other answers
RELEVANCY SCORE 74.8

I have a new Precision 7710 with a 2.5 inch 1GB SATA SSD (system boot=Disk0) and a 1GB NVMe PM951 SSD.
I have been attempting to install Windows Server 2012R2 on the second, M.2 SSD (Disk1) into a GPT, NTFS partition.
Since this system has no DVD, I made a bootable UEFI thumb drive with the contents of the .iso installation for Server 2012R2.
The thumb drive boots OK and I can begin installation, but when it comes to choosing the target for installation, the M.2 SSD is not visible in setup.
The M.2 drive is clearly visible inside Windows 10 Pro as the D: drive.
So...I mounted the .iso setup file in Windows 10 and ran setup.exe. The install began and could see the target M.2 drive, and began loading files on the second SSD. It then attempted the first of several restarts that come with this process with the new Server 2012 R2 environment.
It sucessfully modified the Windows Boot Manager before the restart, then restarted, and the setup program gave an error because it could not find the target partition on the second SSD.
The setup environment then modified the Boot Manager to "Windows Setup Rollback" and proceeded to enter an infinite loop, attempting to delete files from the unreachable M.2 drive. I manually choose Windows 10 on the boot menu, and once booted changed Windows 10 back to the default OS.
I've tried several things (turning off Secure boot, changing from UEFI to legacy bios--it won't boot at all that way) , but I can't get that second disk t... Read more

A:Precision 7710 UEFI Bios and pre-boot does not detect second SSD (NVMe PM951) can't install Windows on it for dual boot

You're going to need to build a new set of boot media with NVMe drivers.
www.nvmexpress.org/.../

Read other 1 answers
RELEVANCY SCORE 73.6

Hello, I just got a brand new Dell Precision T1700 and the VGA port doesn't seems to work. The PC does boot up but the display is totally black. I bought a DVI to VGA and that solved the problem by connecting my VGA cable to the DVI adapte.
The PC comes with Win 8 Pro 64-bit. It doesn't show any error into the Device Manger : and the NVIDIA Quadro 620 drivers are OK.
This is my first Dell PC and I wonder if this is normal or do I have a problem with the VGA port? Or do I have to enable the VGA out maybe from BIOS or something? 
Thanks.

A:VGA on Dell Precision T1700

There is no vga port on the video card and you must use the video card since the built in vga port is disabled when a discrete card is installed.
It is a waste to connect to vga with a new computer. Digital is much better than analog. It you have an old vga monitor, it is time to buy a new one.

Read other 6 answers
RELEVANCY SCORE 73.6

Hello. Does anyone know if I can use 32 gb of non-ECC ram in a Precision T1700 small form factor desktop? The spec sheet says ECC ram to is required to get 32 gb but the custom order page has an option for 32 gb of non-ECC.

A:32 gb non-ECC memory on Precision T1700 SFF ?

Does anyone have an answer to this old question?
a similar question was not really answered last year:
en.community.dell.com/.../20000045

Read other 1 answers
RELEVANCY SCORE 72.8

Hello,
does anyone now if i can install the new samsung 950 pro on these machine ?
i understood that i need to use connector from m2 to pci Express Gen 3, but i have only 1 PCI express Gen 3 in my computer that uses for the graphic card.
1. can i shift my graphic card to another slot (as pcie gen 2) ?
2. does dell precision T1700 support NVMe (so i can boot from the samsung 950 pro) ?
and if not can i do something that it will support ?
Thanks,
Shay 

A:dell precision T1700 with samsung 950 pro

There isn't an M2 Socket.  NVM Express is not an option without an adapter.  Not sure if this can be bootable.  PCI-E Generation is not a SLOT its a Chipset.  If you have one PCI-E 3.0 slot then all of the slots are that generation.  M2 SSD requires X4 PCI-E slot.  The Video X16 slot cannot be used for storage controllers.

Read other 4 answers
RELEVANCY SCORE 72

I have enabled RAID in the BIOS, and have 2 drives connected. I do not see any options and nothing happens when I press CTRL-I during boot. I've done this many times on a PowerEdge and it prompts you to enter RAID bios during POST.
Why don't I have option to configure? I called support and they were scratching their heads too. It may be worth noting that WIndows 8 is installed and secure boot is enabled. 

A:How to configure a raid volume on Precision T1700

I know this has been a while, but which RAID controller are you using?

Read other 5 answers
RELEVANCY SCORE 72

My Precision T1700 desktop could not be turned on, with flashing LED light (2 short blinks, pause, 1 short blink) on the power button. This desktop was bought a bit more than 3 years ago and unfortunately the 3 year warranty just expired last month.I contacted Dell support yesterday and described the issue encountered. And they told me that it should be related to the motherboard. They said they would check and come back if they could find the parts required for the repair. (and of course i'm prepared to pay for the fees given that the warranty has expired)
I received an email from Dell today and it is disappointing to hear that they could no longer support T1700 as they don't have the parts. I have been using desktop by Dell since 2000. None of the previous desktops broke down within 5 years. And this is for the first time, I need to call for support and it is really appalling that the company can no longer support a top notch PC that was just purchased 3 years ago. 
How could I be convinced to trust Dell's products going forward with such level of after sale service?

A:Dell no longer supports Precision T1700?

The Precision T1700 was released in 2013. Once past 3 years, it is very doubtful that we would have replacement parts for sale for out of warranty customers. You will need to search for a replacement motherboard from a 3rd party seller. Search using these part numbers =
MWMM1, 1MN36, V5MC0 (Small Form Factor chassis)
6WK5N, XTVK8, H7HK5 (Mini Tower)

Read other 2 answers
RELEVANCY SCORE 72

I have a Precision T1700 with a PSU 290w. I want to install a geforce 740 which needs at least 400w.
How should upgrade my PSU in order to be able to change the video card?

Read other answers
RELEVANCY SCORE 72

I currently have a Precision T1700 and am looking to upgrade the graphics card to an Nvidia 4GB Quadro M2000 and would like to know if it will actually fit in this tower? Has anyone done this yet?
Thank you for your help!
Mike

A:Precision T1700 upgrade to Nvida M2000

Hi.
The quality of the picture is quite poor, but you can still read the "QUARDO" letters (barely).
Quadro P2000 might have a better price/performance ratio tough.
i.dell.com/.../workstation-precision-T1700-polaris-mag-pdp_module-2.jpg

Read other 1 answers
RELEVANCY SCORE 72

Just got this bad text on screen after waking up the PC from sleep mode.

Now I restarted the PC and the screen is just fine. Any idea what's wrong? Is a Windows 10 Anniversary update issue or a bad NVIDIA Quadro K620? Thank you.

Read other answers
RELEVANCY SCORE 72

Does anyone know if I can use 32 gb (4x8GB) of non-ECC ram in a Precision T1700 tower?  The spec sheet says ECC ram to is required to get 32 gb but I was thinking of getting 2x8gb now and another 2x8gb later.

Read other answers
RELEVANCY SCORE 71.2

Hello,
I'm trying install a PERC H330 RAID Controller on Precision T1700 which running Windows7, after driver version v6.604.06.00 updated, it show error code: 10 - This device cannot start.

Does anyone has experience to install the H330 adapter on T1700 and successful to make it work? Thanks.

Note: I also test the H330 on other PowerEdge Worksation which can install the driver and working normally. So I confirmed the card is 100% working.

Read other answers
RELEVANCY SCORE 70.8

Hello,
I have a problem with Precision T1700.  Itl reboot after shutdown command or with the power button.
it's a universal problem because i've tested at least 4 Precision T1700 .
The way to reproduce this problem is below.
1.Turn on Wake on LAN in BIOS
2.Disable Deep Sleep Control in BIOS
3.Install a Leap42.2 (kernel-4.4.74-18.20). The shutdown command or the power botton halt the computer and it will restart after 2-3 seconds.

The BIOS version is A23, it's the latest.

A:Precision T1700 : Reboot automatically after shutdown on OpenSuse Leap 42.2

Dell does not support SUSE.

Read other 3 answers
RELEVANCY SCORE 70.4

Yikes! installing a second partition with Ubuntu is really hard next to Win7 on a m2 PCIe NVME.If you have been successful, your help would be greatly appreciated.I have encountered numerous problems installing Ubuntu 14.04 on a separate partition on a Precision 5510 with  1TB m2 PCIe NVME memory installed by Dell. 
I started out by creating a USB with the Universal USB Installer and the Ubuntu 14.04 installer.then followed these stepswww.lifewire.com/ultimate-windows-8-1-ubuntu-dual-boot-guide-2200654  encountered two problems. 1.) When booted to try Ubuntu and then selecting the install ubuntu icon, the installer does not recognize the m2 PCIe NVME drive and failing because the installer sees < 6GB of storage. 2.) The system bios configuration SATA operations must be changed from RAID On to ACHI - This corrupts the Factory Win 7 image installed by Dell and fixing it requires reversing the bios configuration change and running windows repair.This is dead simple with on any system with a SATA  hard drive.Has anyone successfully done this?Here is the really crazy thing. I need both Ubuntu for work and windows to communicate with the most of the world.  I chose to have Win7 factory installed believing that installing Ubuntu on a second partition of the m2 PCIe NVME drive would be simple. But that means Dell's support for Ubuntu and access to the Dell factory Ubuntu 14.04 image with drivers includi... Read more

Read other answers
RELEVANCY SCORE 70

Good day.
I plan to upgrade the casing and psu of a Dell SFF Precision T1700. Provided that I have ATX Power Supply Cable 24pin To 8pin For DELL Optiplex 3020 7020 9020 T1700 converter cable. Will I have success in doing the following:
1. Install Corsair CX550M PSU
2. Install In an ATX cassing
3. Install a GTX 1050ti Video Card
Question: Are the front panel usb, audio and mic standard pin? Most casing has individual pin where I can trace the mic and audio pins

Read other answers
RELEVANCY SCORE 67.6

So, initially this Dell came setup with a factory OS on the PCIE based NVME drive.
Recently we re-installed the OS, but the OS setup was not seeing the NVME drive, yet, Bios was reporting it. So we setup the OS on an EVO SSD. We then cloned it over to the NVME after realizing Windows was detecting its presence. Everything worked well, we removed the Samsung Evo and the PC had used the NVME based cloned OS for a few days, but now it decided to lose track of the NVME and only boots into start up repair. Nothing you do does anything; last known good config, restore(none created), chkdsk(doesn't find issues), SFC /Scannow doesn't run(Windows Resource Protection could not perform the requested operation). I then noticed that startup repair fails with a Log file "D:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt.
Clearly the OS now thinks the secondary 2TB drive is now C. I can't help but wonder if this was the reason I couldn't natively install the OS onto the NVME in the first place. There must be some startup delay on the NVME where the order gets shuffled around. Yet, the NVME is still the first boot device in Bios. so nothing has changed there. Ran diags and both drives pass. I unplugged the secondary SATA-based 2TB drive and that at least causes the startup repair failure to end with "Log file C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt"
I've had these sort of issues with Precisions in the past.  They aren't as friendly with drive re-... Read more

A:Dell Precision 5810 no longer recognizing Dell NVME PCIE card drive

If the drive was in RAID then that's probably why it doesn't like it. Probably since the PC does not see it as a logical hard drive but as a RAID drvie.

Read other 1 answers
RELEVANCY SCORE 60.8

Older desktop running XP Pro. Had some problem booting yesterday; and today am unable to boot up at all.
Problem area seems to be the CD drawer.

Fairly sure that boot sequence is CD then C and then perhaps A (diskette drive).
Yesterday, it took several tries to boot the desktop, and I noticed that the green light on the CD drawer often kept flashing even after I had been successful. I ended up using a paper clip to open the drawer and left it open for the remainder of the day.

Today unable to boot successfully.
At one point screen showed some brief text, I believe whatever is typical at starting up sequence, but this immediately went dark. It seemed like the CD drive and drawer were trying to be accessed.

After several abortive attempts, I did a text message with something like
I believe Checksum error or Sum error but very far from being completely sure on what error code.
Previous attempts at starting computer have failed, please contact Dell for support.
While yesterday I had been successful at some point in getting CD tray to stay in the open position, and not keep closing - today I have been unable to do so.

============
At some point I should replace this old machine. If I can get it up and running again, I expect that I should take the CD drive out of the boot sequence (or put it after C drive).

I do not have any bootable CD at the office, and not sure if I have one at home either (this is computer I used to use at home and now have in office).

Thanks for any s... Read more

A:Unable to boot desktop (Dell Precision 450)

Read other 9 answers
RELEVANCY SCORE 60.4

Hi,
I have a Precision 5510 with Xeon CPU, 1Tbyte NVMe, Windows 10 Pro. I have the latest updates for Windows and (almost, see below) updates from Dell.
Sometimes (once a day or more) the disk activity goes 100% on Task manager - Performance, read and write speed to 0. After about 10s the computer crashes with a BSOD.
Sometimes instead (not sure if it is related) the computer hangs doing any disk related operation or it is really slow.
There are two Dell updates that seem to be successfully installed, but if I do another check with the Dell utility, those updates appear again.
The updates are:
Intel Serial IO driver driverid FC98F
Intel Management Engine Components Installer driverid X37VM
Feel free to ask for any log info might be useful.
Best regards,
Matteo

Read other answers
RELEVANCY SCORE 60.4

Hello,
I've got a Precision 5510 with NVMe and I've tried to install a secondary ssd drive. When I opened, I saw the space for the drive, but to my surprise there is no connector??? What am I missing here?
Thanks!

Read other answers
RELEVANCY SCORE 60.4

Does the T3610 support booting to PCI-e 3.0 NVMe drives?
I'm trying to get this configuration to work, but I'm having a heck of a time.  I'm running the latest BIOS version A11, and it is configured for UEFI boot.
I have a USB installation drive that is formatted with a GPT partition using FAT32.
I pick F12 at startup, pick my USB drive from the UEFI section, and install Windows just fine.  The Windows installation process sees my NVMe drive with no trouble, and installs to it just fine.  However, after the install is finished, I reboot and it won't boot to the NVMe drive.
Has anyone gotten this to work on a T3610?

Read other answers
RELEVANCY SCORE 60.4

I have a new 7710 that came with a 256GB NVMe SSD.  I have upgraded it to a Samsung 950 Pro 512.  I am using Windows 10 UEFI.
I have a question on the bios setting.  Should it be AHCI or RAID.  The machine came default with RAID On and came with Win 10 Pro pre-installed.
Currently I switched it to ACHI, used the MS Download and installed Win 10 Pro.  Once in windows, I installed all the dell drivers and also the Samsung NVMe driver.
I have read on different forums that the bios setting should be RAID, but also read it should be AHCI. 
Question:  Which should it be.  Is one better than the other?  
Or is it just that if in AHCI, it will use the MS NVMe Driver (or Samsung NVMe Driver) and if in RAID, it will use the Intel IRST drivers?
I assume if AHCI like I have it, then I can use the Samsung NVMe Driver.  I have read if not in AHCI, the Samsung NVMe Driver will not install.  
If I switch to RAID, then I would need to use the Intel Rapid Storage Tech (IRST) Driver and not the samsung driver (I read samsung driver will not install if AHCI).
So I am confused if one is better than the other (AHCI or Raid).
FYI, I have been using for around 10 days and no BSOD due to the PCIe NVMe drive.

A:Precision 7710 and Samsung NVMe 950 Pro

I own a Precision 7510 and am in the same situation. I did exactly the same except that I left the BIOS setting to Raid ON. When in Raid ON the Samsung Magician can only do the following:

Disk drive information for all installed disks. Particularly with the NVMe drive S.M.A.R.T. is not functioning even though it should be. All other drives display S.M.A.R.T. correctly.
Performance Benchmark. Only this function is selectable. All other functions are not available. Probably because the Intel Rapid Storage Techonlogy driver is loaded and not the Samsung NVMe

From performance view it seems pretty fast. Today I am going to change the BIOS setting to AHCI and I will share my results.

Read other 1 answers
RELEVANCY SCORE 59.6

Can someone recommend what drivers are required to make Precision 5510 NVMe drive & Dell's USB network dongle appear working in WinPE3 (requirement for SCCM 2007)?
If i configure BIOS to Legacy i seem to have network connectivity.. BIOS configured to UEFI, i have access to the NVMe drive but no network connectivity...
I've tried numerous drivers from Dell / Intel but all without any success

Regards

A:Precision 5510 / WinPE3 & NVMe drives

All you need to do is install the Windows 10 ADK (doesn't matter if your deployment system is Win 7, 8, 8.1, 10 or server whatever).  Once the ADK is installed, during the Snap Deploy media builder, change to WinPE and it will do the rest.  Windows 10 ADK already has the necessary drivers for these PCIE NVME hard drives. First off it would need WinPE 10 in order to get support for UEFI BIOS and GPT formatting on drives, as WinPE 3.1 (based on Win7) and WinPE 4.0 (based on Win 8.0) are insufficient. and the INTEL RST 14 drivers would need to be included.  NVME requires BIOS Support.
AHCI is the only option available in Modern Bios and chipsets.  INTEL RST F6 drivers are REQUIRED for all advanced format 4k sector hard drives. Most all drives larger than 80 gigs with 4k sectors MUST have this. Intel® Rapid Storage Technology 14.8.0.1042 Production Version Release   This build has been validated on and supports Windows 10 TH2.

https://downloadcenter.intel.com/download/25165/
 

14.0.0.1143
13.6.0.1002
13.2.4.1000
13.1.0.1058
12.9.0.1001
12.8.0.1016
12.5.0.1066
12.0.0.1083
11.7.0.1013

Read other 2 answers
RELEVANCY SCORE 59.2

So my company orders laptops from Dell, and as per usual ordered one downgraded from Win 10 to Win7.
 In this case it is a Dell Precision 7510 with an Intel i7 and an SSD Lite On CX2 NVMe 512 GB. The SSD failed pretty quickly and Dell sent someone to replace it. I think he also replaced the Motherboard. Unfortunately trying to boot our Win
7 Pro image failed because this machine has only USB 3, and the standard Win 7 image has no drivers for USB 3. So the guy left before we got to installing Windows, which I now regret. I added USB 3 drivers to the image and got as far into the install as selecting
a drive but no drive is found ?and it invites me to load a driver for mass storage.
 
But I cannot find a driver for any Lite On SSD. I?ve never seen an SSD that needed one to be added, actually so not sure if this is the right way to tackle this. I have seen suggestions
of using another make of driver and I downloaded a load of different ones including Intel on the theory that?s the chipset. In BIOS I get option for AHCI and RAID On and I tried both with same result.
 It recognizes different drivers if I check ?Hide drivers that are not compatible?, depending on RAID or AHCI. But any I can see and load still give no drive visible. DISKPART also fails to find the disk so none of the solutions which involve
DISKPART are useful right now.
 
If it?s relevant when I go to boot options I get: Boot mode ? Legacy, Secure boot: Off.
Then und... Read more

Read other answers
RELEVANCY SCORE 59.2

My corporate office has told me that we will be using Dell Precision 5510 laptops in the future and our office uses Windows 7 Enterprise because we need bitlocker on them.  Dell has a fully functional Windows 7 Pro disc which I can download and install with no issues.  The BIOS is configured for legacy and the drive is configured in AHCI mode when I do the installation.
If I attempt to install directly from our Windows 7 SP1 Enterprise disc from Microsoft as part of our enterprise agreement, I get the error "A required CD/DVD drive device driver is missing.  If you have a driver floppy disc, CD, DVD, or USB flash drive, please insert it now."  This error happens because I have a Skylake based laptop with only USB3 (no USB2).  When I attempt to inject the proper drivers into the install.wim and boot.wim files that are in the sources folder I no longer get this error, but the installer cannot see the hard drive unless I change the bios to UEFI and RAID.
Even though the windows installer can now see the hard drive, I cannot install to it.  I get the error "Windows cannot be installed to this disk.  The computer's hardware may not support booting to this disk.  Ensure that the disk's controller is enabled in the computer's BIOS menu."
I have attempted injecting the MS KB2990941 and KB3087873 into the disc since these are supposed to add NVME support to Windows 7.  I change the BIOS back to legacy an... Read more

A:Windows 7 Enterprise on Skylake/NVMe (Precision 5510)

Greetings Winklema,
Thanks for your question. Please note I'm not an expert on this topic. I was just speaking with my colleague here and found out there's some kind of firmware limit that won't allow to install from disk. The recommendation is to use MDT. Here are the instructions: www.dell.com/.../en
Hope that helps. If you have any further questions on this topic they'd probably be over my head :)

Read other 2 answers
RELEVANCY SCORE 59.2

Hello,
I'm considering instalation to my precision T5600 new ssd disk. I'd like to ask if it would work properly as primary OS disk if I install an SSD disk e.g. samsung sm951 or patriot hellfire M.2 PCIe NVME using Delock PCI Express x4 - NVME M.2 adapter.
I would like to install on this ssd new OS and boot from this disk.
I've already updated my BIOS to A15 version. Will it handle NVME or not?

A:Precision T5600 - SSD PCIe NVME disk instalation

Hi grzesiwek,
I'm afraid to say NVMe boot drives aren't supported on the T5600. There was a discussion on it here:
en.community.dell.com/.../19984979

Read other 1 answers
RELEVANCY SCORE 59.2

Hi,

I'm not getting full speed from Samsung SM951 NVMe 512GB drive,  while other reported almost double the speed I'm getting from Crystal mark.
I tried everything from using latest Samsung drivers, Microsoft NVMe drivers, updated the bios and disabled "windows write-cache" with no change whatsoever to the numbers.
I'm suspecting the Firmware used by dell cap the drive to reduce the TDP, but getting half the speed is very disappointing.
This is what I'm getting
and these what other people are getting

Baraa

Read other answers
RELEVANCY SCORE 59.2

I recently bought a Precision 5510 and it comes with 125GB m2 ssd and wondows 10.  So I decided to upgrade to a bigger capacity of hard drive.  So I bought a 512GB m2 PCIe NVME Toshiba XG3 THNSN5512GPU7.  But after I installed it, the laptop won't recognition it as NVME but regular SSD.  I want to use it as its full potential.  Please help.

A:Problem with installing m2 PCIe NVME on Precision 5510

Did you replace the existing drive, or add a second?

Read other 1 answers
RELEVANCY SCORE 59.2

It came with a 500 GB SATA drive. After getting all drivers up to date, I used Acronis to clone over to the 256 GB Samsung 950 Pro NVMe SSD.Shut down, unplugged the 500 GB SATA drive, and booted right up onto the NVMe. No problems at all. Installed Windows updates, various software; all without a glitch.However, later on, I reconnected a SATA drive, which will be used for backups. But whenever a SATA drive is connected, the NVMe drive does not show up in the list of boot devices and the system will only attempt (and fail) to boot off the blank SATA drive.Things I have attempted:Tried all the SATA portsTried different SATA drivesChecked for a firmware update for the NVMe (none)Flashed the BIOS to the current (just released 2 days ago)Actually had Dell come out and replace the motherboard (!)This is starting to feel like a possible BIOS bug or an incompatibility with the Samsung NVMe drive.Has anyone else experienced this problem?IT Guy; San Rafael, CA

A:Samsung 950 Pro NVMe not showing up in BIOS on Precision T3620

I have a T7600 which I believe is an older model, and I want to by a 950 Pro + an addin card to use in one of the PCIe slots (or an Intel PCIe SSD) .. But I'm not sure if it's supprted by that MB. .. Reading a little into the issue, I found out that there are 2 options for the bios, Legacy OR  UEFI, the latter being needed for the NVMe support in boot.. So you might as well check that out..
I'm still not sure though if these SSDs are supported in my case..
Regards..

Read other 1 answers
RELEVANCY SCORE 59.2

modern ssd are either nvme or ahci compatible.  I cant find anywhere in literature that gives me this information.

A:Does the Precision t5500 support uefi? . I am trying to see if its compatible with nvme ssd

The T5500 is legacy BIOS only - no UEFI support.

Read other 1 answers
RELEVANCY SCORE 57.2

Some new video card settings is causing my java apps to crash.  Attached the error log below.  Works fine on older model (T1600). Any idea what it can be?

Version=1
EventType=AppHangB1
EventTime=130987863829079498
ReportType=3
Consent=1
ReportIdentifier=e302843a-c8b7-11e5-9077-989096df4f28
IntegratorReportIdentifier=e302843b-c8b7-11e5-9077-989096df4f28
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=java.exe
Sig[1].Name=Application Version
Sig[1].Value=6.0.300.12
Sig[2].Name=Application Timestamp
Sig[2].Value=4ebb9ffe
Sig[3].Name=Hang Signature
Sig[3].Value=af4b
Sig[4].Name=Hang Type
Sig[4].Value=0
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=af4b7c972a5a225c086af9f8c05a1d48
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=1a1c
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=1a1ceb7ca8edf75778e5e09d80814baa
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=af4b
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=af4b7c972a5a225c086af9f8c05a1d48
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=1a1c
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=1a1ceb7ca8edf75778e5e09d80814baa
UI[3]=Java(TM) Platform SE binary is not responding
UI[4]=Windows can check online for a solution. If you close the p... Read more

A:T1700 onboard graphic card (Intel) causing Java app to freeze and crash

SROmar,
Go to add/remove and uninstall Java, reboot then reinstall from here http://www.java.com/en/
If you're using Windows 7(64-bit), make sure you download and install the correct version.Click the green icon at this link:http://www.filehippo.com/download_jre_64/                 
For me to better assist in troubleshooting, please click my DELL-Jesse L and send me a Private Message with the Dell Service Tag number and your Dell Order number.
                                                                                                                                                              &nbs... Read more

Read other 1 answers
RELEVANCY SCORE 57.2

Good day Dell Community,
Because of your questions I'm pleased to present the below information, specifications, and requirements for M.2 on various Dell models.
Precision 7710:
Internal dives supported: 3
Drive configurations supported ( max ): 3x M.2 or 2x M.2 and 1x 2.5inch SATA.
7710 PCIE Lanes:
The 2 M.2 slots available are wired as 4X
The 2.5 Inch bay is wired as 2X
Parts needed to install an M.2 into the 2.5 inch bay of 7710 and 7510:

1x 745TM 2.5 inch metal bracket - most units will have this already included                               
1x Y1WJX M.2 bracket ( goes inside of 745TM )
4x 2864D M3X3 screw. Most systems will have these already included. These screws hold in the Y1WJX M.2 drive carrier, or a 2.5 inch drive into 745TM.

1x WPTND M.2 Interposer Board. This installs into Y1WJX M.2 bracket.
5x 4270E M2.0*3L screws
1x HR8P8 M.2 thermal cover
Find instructions here on the Dell Community.                                                                                                                                 ... Read more

Read other answers
RELEVANCY SCORE 54

My laptop is VN7-791G-79JA Is it compatible with the standard PCI Express 3.0 x4 (NVMe)? Is it compatible with the Samsung SSD NVME 950 PRO M.2 (PCIE) MZ-VKV256?Will it work at maximum performance?

Read other answers
RELEVANCY SCORE 53.6

Hi,I have a Lenovo Thinkcentre Desktop SFF M800, running windows 10 pro, Bios # FWKT38A, i recently purchased a TP-link Wireless N PCI Express adapter Model # TLWN88IND after i installed & booted my pc i got this error message "Unauthorized Wireless network card is plugged in. Power off and remove it, how to fix this error ? you suggestion is greatly appreciated  Bios Information - BIOS Version/Date LENOVO FWKT38A, 1/28/2016Processor Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3192 Mhz, 4 Core(s), 4 Logical Processor(s)  Regardsskorpinok

A:Wireless PCI Express card error ThinKcentre M800 Desktop

Unfortunatelly your M800 have a whitelist in BIOS, which prevents booting with unauthorized devices, like your TP-link module. Sadly, you won't be able to use it. Below I've listed supported modules:FRU: 00JT471, Wireless,CMB,LTN,NFA344 V2FRU: 00JT477, Wireless,CMB,LTN,NFA435FRU: 00JT480, Wireless,CMB,IN,8260 ac NVFRU: 00JT497, Wireless,CMB,IN,3165 acFRU: 00JT506, Wireless,CMB,IN,8260 NV IndFRU: 00JT507, Wireless,CMB,IN,3165 ac In Please do note, that all these moduels have m.2 2242 size and require additional reiser card m.2 -> PCIe and proper antenna kits. More information about parts below:https://download.lenovo.com/parts/ThinkCentre/m800_sff_parts_12302016.pdf Hardware maintenance manual:https://cc.cnetcontent.com/inlinecontent/mediaserver/test/978/7cb/9787cba5683f4da9b9867fd349b7ca81/o...

Read other 1 answers
RELEVANCY SCORE 53.6

SSD PCI-Express x4 NVMe will work with Toshiba Z30?

Plextor PX-1TM9PEGN 1TB

Read other answers
RELEVANCY SCORE 52.8

I have a Precision t7600 with A12 BIOS.  Asus hyper PCIe card installed with SM951 M.2 NVME SSD.
Currently the system runs flawless, booting from (2) RAID0 sata in LEGACY BIOS mode.
I installed the NVME on ASUS-HYPER PCIe card.  System recognized the SSD right away.  SSD  formats, copies, passes windows tool tests.  Yay - fun and fast.  Ok now I would like to boot from this fast SSD.
I physically disconnect mechanical SATA drives, from the system.
Create usb-thumb windows 8.1 install, and attempt to install to NVME SSD.  After the system partitions the SSD, I click "OK".  The first cycle install operating system to SSD - good.  The system reboots gracefully.  Normally after this step, system SHOULD NORMALLY boot from the drive and continue to install.  On MY system, will fail at this point:
 "No bootable devices--strike F1 to retry boot, f2 for setup utility Press F5 to run onboard diagnostics."
If I leave the USB thumbdrive in, it will automatically boot from the install USB and recycle the windows install from START again - and do this for eternity, instead of booting from the brand new install to the NVME SSD.
--
Going on day 3, really frustrated.  I can NOT get this system to take an install, in the UEFI, on the SSD.  I tried windows 8.1, windows 10 and Ubuntu 16, same problem each time.  I recently updated BIOS from A10 to A12.  I have tried to use RUFUS procedures to crea... Read more

A:Precision & SM951 NVME SSD. Using UEFI, on USB created from Microsoft d/l windows 8.1 and 10: "No bootable devices"

When it says Strike F1... did you press F2 and look in BIOS setup to see if that drive is first in the boot sequence?

Read other 2 answers
RELEVANCY SCORE 52.4

Is it possible to boot OS from SSD Express Card inside the slot?

Like Verbatim:
http://www.verbatim.it/it_10/product_ssd-expresscard-64gb_31_0_15800__5184.html

Thanks.

A:Satellite Pro U300-143 - Boot OS from SSD Express Card

Hi

This would be possible if the BIOS would provide such support.
But as far as I know the BIOS support booting from:

*USB FDD, HDD, ODD, Network(LAN), USB Memory*

As you can see the booting from Express Card is not supported.

Read other 2 answers
RELEVANCY SCORE 51.6

so I'm considering getting a Samsung 970 PRO 512GB Internal PCI Express 3.0 x4 (NVMe) SSD for my P52 as a second SSD. How do I install it? Do I need to buy anything additional like I would need to for a SATA drive (which in that case is the bracket/cable)?  Also, where is the official SATA stuff for the P52? This website doesn't look official.

Read other answers
RELEVANCY SCORE 51.6

Hello Everyone. Does anyone know why my ThinkCenter M900 cannot see NVMe SSD 500GB (PCI-Express 3.0 x4) in Windows 7. This SSD show up in BIOS but not in Windows.Thanks,

Read other answers
RELEVANCY SCORE 50

I need help! So I'm reaching out to you even know this is not the forum--any ideas? Loved to make this ol' 64 bit run again for my kid!
I need to get a video card that will work with Windows 10 on a Dell Precision 380--It's a PCIe card with a power connector on the card. Can't figure that out. Any ideas? It has a FX 3450 card now.
Also I have a Pentium D 3.0 GHz with 8 GB of RAM so it's working--kind'a. I can't update the driver on the video card because this is so old, but it's running Windows 10 without a hiccup except for the video latency--skips like crazy--Didn't have the problem with XP: just after the upgrade. Mind you, this is 64 bit

Read other answers
RELEVANCY SCORE 49.2

Do any of the Lenovo desktops allow booting from a HW NVMe RAID1? The desktop will host a small Sybase SQL server install for 10 connected PCs.

Read other answers
RELEVANCY SCORE 47.6

Just got the desktop and put in a Samsung 960 EVO SSD.
I was only getting half of the rated speed of the SSD and noticed that the SSD was running at PCIE Gen2 instead of Gen3.
Can anyone confirm if the NVME slot on the motherboard is Gen3 capable or am I stuck with the slower speeds?

Read other answers
RELEVANCY SCORE 47.6

Can someone confirm or deny that the EliteDesk 705 G1 desktop mini supports NVMe M.2 drives?  I've seen mention that the 800 G1 systems support NVMe drives, but not the 705 series. The quickspecs for this DM says that the M.2 is PCIe X4, but not whether the BIOS supports NVMe. (The 705 G2 DM specs clearly indicate this. I wish the 705 G1 DM specs were a little clearer.)

Read other answers
RELEVANCY SCORE 47.2

I have read about 100 different explanations of this process all fraught with scary changes to BIOS and difficulties installing windows from scratch on the card from a sd card.
I wanted to ask if this procedure would work.. Please correct my errors
1  Boot into safe mode from MSCONFIG. Hit f2 and go into bios and change from RAID to AHCI.  Continue to boot into safe mode.  run MSCONFIG again and set to normal boot.  Now reboot computer.  It should now be AHCI ready for ssd.
 2  Shut off everything and unplug all peripherals then install the M.2 card in the empty M.2 slot. (BTW, is there already a screw in the hole on the MB so I can screw down the card after installation) Will I have to open the interior metal "cage" to access the m.2 slot)?
3 Boot back into Windows using the HDD as the boot disk.  Will the SSD be recognized as present and empty?  I hope.
4.  Use the free Intel data migration tool to clone the ssd from the HDD. Shut down.
5 Open up the computer again and unplug the HDD leaving it in place but unplugged from power and sata.
6 Boot up computer.  The SSD should be recognized as the boot disk right? or do I have to do something in Bios?
7 Assuming steps 1-6 work shut down and plug the HDD back in.
8 Boot into windows 10 again the ssd should now be the boot disk.
9.  Format the HDD so I can use it to store old data.
10.  Install faster Samsung driver for SSD.

Now do I smile or cry?  W... Read more

Read other answers
RELEVANCY SCORE 47.2

I am trying to setup a Samsung vPro 950 m.2 SSD in a new ThinkCentre M900. The drive is fully installed and operational. It is installed to a PCIe daughtercard and it is achieving its full read/write speed. Windows 10 is installed to this drive. Unfortunately this drive is not visible in the Bios boot order.  The boot process is being handled by the Windows Boot Manager that still resides on the original drive. The Bios is fully updated, FWKT34A (1/12/16). Should I be able to boot to this drive?  What do I need to do to enable this? Anyone have a suggestion?










Solved!
Go to Solution.

A:Boot from NVMe

The M900 is booting fine from Samsung 950 Pro here, I just removed the S-ATA SSDs before installing Windows 10 Enterprise on the 950 Pro drives (they are connected with a PCIe x4 Riser card as well as this crappy mainboard only has a M.2 2230 slot...

Read other 6 answers