Over 1 million tech questions and answers.

Hardware problem? Help!

Q: Hardware problem? Help!

Hi all, this is my first post here and its a doosie. So, I was in the middle of copying a large ammount of information from one place on my hard drive to another (by large i mean it was an estimated 30 minute copy) when i went to get some lunch. I came back to find that my computer was somehow seriously injured. It will start and run bios checks just fine, then it takes me to the little screen that tells me that windows had failed to start properly and askes me if i would like to start in safe mode, The last known good configuration, or start windows normally. Upon selecting any of theise options, about 3 seconds after the computer begins initializing windows (the little windows XP screen goes up and the blue loading bar is active beneath the logo) the computer will reboot and the whole process starts over again. Please help me out here, im clueless!

Brian

RELEVANCY SCORE 200
Preferred Solution: Hardware problem? Help!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 40

I m facing this video hardware error from last 1 week in my HP G62 361Tx Laptop.
Laptop Cooling fan is working Ok. no Abnormal sound.
I have installed TechPowerUP GPU Z to check GPU Temperature..
Min Temp.-> 52 degree centigrade
Avg. Temp-> 72 degree centigrade
Max Tamp. -> 84 degree centigrade
I m attaching follwing file:
WD-20130329-1304.dmp
sysdata.xml
WERInternalMetadata.xml

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, x64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3061 Mb
Graphics Card: ATI Mobility Radeon HD 5470, 1024 Mb
Hard Drives: C: Total - 51743 MB, Free - 20209 MB; F: Total - 108149 MB, Free - 11567 MB; G: Total - 145237 MB, Free - 10863 MB;
Motherboard: Hewlett-Packard, 1426
Antivirus: Norton AntiVirus, Updated and Enabled


Description
A problem with your video hardware caused Windows to stop working correctly.

Problem signature
Problem Event Name: LiveKernelEvent
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Files that help describe the problem
WD-20130329-1304.dmp
sysdata.xml
WERInternalMetadata.xml

View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Extra information about the problem
BCCode: 117
BCP1: B3C4F008
BCP2: 99FC68B0
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product:... Read more

A:Video Hardware Error-A problem with ur video hardware caused Windows to stop working

Read other 16 answers
RELEVANCY SCORE 37.2

i have put together a new pc put of these parts

AMD 64 x2 athlon 5600+, Asus Crosshair motherboard, EZ cool power supply 550W on the 12v it has 36 amp, and i have got a Geforce BFG 8800 GTS OC graphic card, 2 gb of DDR2 elixir brand,

the problem is when i try to boot it up nothing appears on my screen i dont know what the problem could be, checked all connection everything is connected, including power to the graphic card, maybe it could be DDR or Power supply or simply my grapgic card faulty??

thanks in advance for any help
 

A:Problem with my hardware hardware please help

Read other 6 answers
RELEVANCY SCORE 36.8

i have acer e1-571 notebook.running windows 10.from last few days my pc giving this error-Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

A request for the USB device descriptor failed.                                                            
                                                                i have tried all kind of suggestions
given by microsoft related this problem .but   cant solved.card reader ,pen drive ,external keyboard ,or external mouse no one working.2.some  random  keys  is not working .please fix my issue .

Read other answers
RELEVANCY SCORE 36.4

Hi guys,

About two months ago I bought an Acer TimelineX laptop (the 11.6" version with the i7 core.) Last night it started havong some vicious problems. It will instantly shut down or freeze with the current displayed graphics being very distorted, seemingly at random intervals. I suspect a hardware problem because a few minutes before all this started I noticed the cover protecting the internal components was out of place, so I snapped it back into position.

I tried running some of the pre-boot Windows diagnostics, but they came up clean. The system crashed once during this process and gave me a blue screen of death that said "PFN_LIST_CORRUPT". I ran a diagnostic on the memory and it came up clean as well. I'm thinking I might have broken some critically important piece of hardware. Anybody have any ideas? Thanks!

-Kai
 

A:Problem with Acer TimelineX turning off/freezing, suspect a hardware problem

A few silly ideas that i've tried with my Acer ..
try taking the battery out !..
just run it off the lead..
I've been told its something to do with a hardware issue with the standby mode of the fan or the CPU or some standby/neutral position that some gizmo inside does (have you guessed that I'm no techie ;o)
Try it out, it could be a simple (if not permanent) fix.
Good luck
 

Read other 1 answers
RELEVANCY SCORE 36.4

Good afternoon Tech Immortals,

I am working on a friend's computer.
The hardware setup is the following:

AMD Athlon 64 X2 Dual Core Processor 5000+ 2.1GHz

2.5 GB RAM CRUCIAL (Memtest says the following about it: DDR2(64 bit)
373MHz DDR746 CAS: 5-5-15

Nvidia GeForce 9800 GT pci-e

MSI K9N6PGM2-V motherboard

The problems:

Problem1. When the computer is turned on it gives out 2 short beeps (memory error, I presume according to an Internet search). Then it loads GRUMP for Ubuntu 9 or Win XP pro
Problem2. Anything that is graphics intensive makes the computer crash or graphics get glitchy. For example videogames will either make windows crash or crash the game and exit to windows. On Ubuntu while running Compiz the OS freezes. It only crashes or glitches with graphic intensive software.

Solution tried:
For problem1. While loading GRUMP there is an option for memtest. Diagnostics came out fine, no errors.

More background information:
I've inspected the motherboard, the graphics card, ram, everything (looking at it physically for any burns or liquid spills etc)
Everything is roughly 4 months old, bought brand new when purchased.
In the past the user had the same setup except that his old graphics card (GeForce BFG TECH 8800 GT) died on him (will get further details about that in about an hour).
Replaced for graphics card mentioned above. Those problems are occurring.
The card gets warm, but not to an alarming point (I want to say around 60 degrees celcius).... Read more

A:Solved: Interesting Hardware problem (Nvidia graphics problem possibly due to RAM)

It was a faulty video card.
User replaced it under its warranty.
 

Read other 1 answers
RELEVANCY SCORE 36.4

Okay, right now I'm currently trying to find out whats wrong with a keyboard that is on a laptop, after the computer starts there are some script errors, I don't know exactly what they are but I ran combo fix without safe mode and restarted the scripts went away...and it started working after restarting a couple times it started to work then restarted more the scripts came back and the keyboard stopped, even in safe mode but after five or so minutes the keyboard was able to type again, I checked the device managers and everything is update and no error, I ran a combo fix and have the report if you guys want to see it let me know, Its an HP DV6 series with 64-bit windows 7 OS, I'm stumped I have no idea whats up, I'm ready to just put in the recovery disks and see whats up, but he has like 250 gigs worth of files Games etc, Can I back it up to a hard drive and install go back to where it was normally or can that be a problem?

A:Laptop Windows 7 Problem/Software/Hardware? Keyboard problem

Bump

Read other 2 answers
RELEVANCY SCORE 36.4

Hi, I'm in need of figuring out if my laptop was infected by a trojan, the operating system went kapoot and i need to reinstall it, or if its hardware failure. I used it last night and my AVG caught a "small trojan horse" called cryptbase.dll and after removing it i believe is where it began. My computer restarted and ended up starting up with the acer splash with me able to click f2 for setup. But f8 doesn't work and causes a long beeping noise if i leave it alone it goes to a black screen with a underscore blinking at the top left. i've done some research but, im unsure which route to take without taking some advice for my own laptop. My laptop is a Acer Aspire 5741-3541, Windows 7,intel core i5-450 processor, 4 GB DDR memory, 500 GB HDD. if you need more information please ask because im unsure with what is needed to fix the problem. The solutions i've heard is reinstalling windows 7, or it might be a HDD problem. Thank you.

A:Unsure if virus, operating system problem, or hardware problem

Let ma ask someone to look here.

Read other 52 answers
RELEVANCY SCORE 36

Hi, I'm new here (meaning I just made an account but have been lurking around every time I had computer trouble. This time however, I couldn't find anything that resembles the trouble I'm currently experiencing) and I'm hoping if anyone can help me or tell me if I should just throw my laptop against the wall.

I've had my printer (details and TSG SysInfo below) for over a year now, and never had any trouble with it. A few days ago, I needed to print something but wasn't able to (I can't remember what the error said, it didn't happen again) so I uninstalled the printer and re-installed it by downloading the drivers from the HP website. Pop-up balloon said that it wasn't successfully installed and when I would try to install the driver by going to print management and click on Printers I would get: "An error has occurred on the script of this page. Line: 40. Char: 21. Error: Object doesn't support property or method 'SetPrinterName'. Code: 0. URL: res://C:\Windows\system32\pmcsnap.dll/81". So I clicked on Drivers instead and tried to install the driver there and it said: windows found driver software for your device but encountered an error.

Do understand that I have no idea what I'm doing whenever my computer doesn't behave as it is supposed to, and everything is done by trial and error; mostly error. For some reason I felt the need to do a chkdsk /f /r which was scheduled on the next restart, b... Read more

A:printer problem? software problem? hardware problem?

Howdy,
Could be the Hard drive has gone faulty. What make and model is this Laptop?
 

Read other 2 answers
RELEVANCY SCORE 35.2

I've got serious problem with my Radeon 9600PRO:

I installed Win XP SP2 on my new PC, Windows detected a new VGA device, it tried to install default drivers but it couldnt find it, (although WinXP CD was in a drive, and internet connection was working)

I installed DirectX9 and then launched the latest Catalyst Setup downloaded from ati.com, and installed drivers. After that, my card was noticeable as HIS Radeon 9600 series properly for Device Manager.
However, it didn't work well - in CCC there is 3d a graphic test - with 3d preview - a car driving on the road - and on my display it wasn't looking good, image was blurred or sth, also the icq icons were blurred (flowers and smiles) - while after uninstalling ATI drivers, when card is seen as a default VGA device (default frequency of monitor, default resolution) icq icons are looking well...

With Catalyst Control Centre installed, after reboting my display goes blank, and the only solution is reboting in safe mode, unistalling ATI drivers, and installing them once again, then it works but until the next rebot in normal mode...

Anyone knows what' the problem is? Rahter software or hardware?
Mayby Radeon 9600Pro cann't work properly with Athlon 64?
Maybe I should change something in BIOS?

My hardware:
HIS Radeon 9600Pro
Epox 8KDA3+ NFORCE3
Athlon 64 3200+
 

A:Problem with drivers for Radeon9600Pro or problem with the hardware?

Did you install the motherboard and AGP drivers?
 

Read other 2 answers
RELEVANCY SCORE 35.2

Hi all, I was hoping someone could help me out. I've been having a reoccurring issue with my laptop. The basic issue is that it runs very, very slow - using about 80%-100% of the CPU when a program is open and 30%-50% of the CPU when no programs are open. If I try to restart the computer, it will hang on a black screen between the "Starting Windows" screen and the "Welcome" screen.

The first few times it occurred (July, October, and mid-November) a System Restore from Safe Mode solved the issue. The fourth and fifth times it happened (late November and early December) I had to try restoring to multiple different restore points before it would work again. The sixth time (mid-December) no amount of System Restores did anything. I ended up running the "sfc scannow" command and that seemed to solve it. The seventh time (late December) neither System Restore nor "sfc scannow" did anything. I ended up reformatting and doing a clean install of Windows. That solved the problem for about a week, then last night it started happening again.

I'm a little lost at this point. I've run tests on both the memory and hard drive and they came out fine. I looked through the event logs each time the issue occurred and didn't see anything that seemed likely to cause this. The fact that it keeps reoccurring, even after a clean install, makes me think it's some kind of hardware issue. But the fact that the computer works completely fine... Read more

A:Strange Problem - Not entirely sure whether it's a software or hardware problem

Hello and welcome.Use Process Explorer to provide an overview of your running processes.Download the .zip file and extract to a folder on your desktop. Run program. In Vista/7: Click File > Show Details for All Processes.Click View > Select Columns and check the Command Line box. Click OK.If necessary, continue to use the computer until it displays the undesirable behaviour (lagging, freezes, etc). Immediately switch back to Process Explorer and press the Space Bar to pause updates.Click File > Save As.... Save to your desktop as procexp.txt.Attach (do not copy & paste) procexp.txt to your next reply. Use the forum's "Full Editor" to attach files.Note: Do not unpause or exit Process Explorer unless directed to.==========================================Use Speccy to provide details of your computer's configuration.Download, install, and run After Speccy has finished gathering information, click File > Publish Snapshot In the Publish Snapshot dialog box, click Yes to enable Speccy to proceed. A web address will be displayed, click Copy to Clipboard and paste it in your next post.=========================================

Read other 12 answers
RELEVANCY SCORE 35.2

Yesterday, I came home from work to see that my computer had done a reset on its own. When I turned it on, I found the Win 10 Anniversary update waiting for me. Since then, I have had several crashes with games, and even blue screens.

The BSOD's go by so fast, that I had to turn off the automatic restart just to read the error as STOP CODE: MEMORY MANAGEMENT. Apparently, this means that there is a problem pertaining with my RAM.

A few months ago, I came on here with a similar problem after my PSU blew and I had to get anothr one. I solved that by buying 2 new RAM cards to replace the ones inside. I ran a memory diagnostic which showed no problems, and right now I'm running a system file check scanner as well. If both of these come back fine and there are still problems, I may have to get new RAM sticks.

I have a 2 year warranty on them, so replacing them again would be no problem. However, before I do that, I was wondering if the problem might be my motherboard or CPU as they are the only components still used from the computer from when the Power Supply blew? These would be my 3rd set of damaged RAM cards in a year, and that just strikes me as weird, especially since they are designed to withstand overclocking conditions.
 

A:Unknown hardware problem (possible software problem)

As the computer shut dow/reset for some unknown reason, I'd suspect that unknown event to be related.

Could be power related (ie: power surge or dirty power), power supply (if you are using a non-Tier one model, or possibly the motherboard.

Bottom line, some event occurred which caused this issue and it likely isn't related to previous issues.
 

Read other 3 answers
RELEVANCY SCORE 35.2

I got a virus so i replaced the hard drive . when i try to install the windows 7[ from the factory] it would closes every 15 minutes. Ok I finished took time but it kind of worked . Problem if my computer closes or if i close it. it will not restart . unless i push the power bottom on, crash the computer, by removing the battery and power cable , wait at least 4 hours, then it will restart and work ok. everything works, but it has trouble downloading some larger files what are reasons a computer will not start the fan works and one indicator light works but it would sit all day and do nothing .I had a business and 4 computers came down sick at the same time but they had different operating systems so they react differently this is the only one i have saved i tried changing the hard drive in two others but i can not restart them what part of the computer tell it to turn on ? thankyou very much
 

Read other answers
RELEVANCY SCORE 35.2

The short version of my problem is that at some point after a reboot, certain web pages fail to load.  I'm not sure what the root cause is, at all.  I am running Windows 7 SP1 and was up to date with updates when this started.
 
When it started happening:
Thursday night, the power flickered at my apartment and made my computer reboot.  I figured it was a good a time as any to install Windows updates since I hadn't done that in a while.  After doing so was when I first noticed the problem.
 
The problem:
What happens is after I reboot, at first, everything works fine.  At some time after, some web sites just don't load.  The sites that don't load are consistent (if I reboot and wait, all the same ones fail).  A couple examples are bleepingcomputer.com itself and any of Valve's (the game developer) sites.  It doesn't seem that computer help/anti-malware sites are all not working, since MBAM and AVG's sites work.  Google itself always works and when Googling for info on this problem, I seem to find more sites that don't work than do, once it starts happening.
 
I don't know specifically at what point stuff stops loading.  I tried rebooting then going to read a book for an hour, and it was working when I tried immediately after.  If I reboot and open Firefox with a ton of tabs and start browsing around, it might stop within a few minutes.
 
What I tried:
At first I thought it was my Internet connection or ... Read more

A:Infected? Hardware problem? Software problem?

Hello knismaps, let's see if we can find something.

Please download MiniToolBox, save it to your desktop and run it.
Checkmark the following checkboxes:
Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.
Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.
Note: When using "Reset FF Proxy Settings" option Firefox should be closed.

Download TDSSKiller and save it to your desktop.
Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is require, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here.
.
.
.
ADW Cleaner Skip or rerun it.

Please download AdwCleaner by Xplode and save to your Desktop.
Double click on AdwCleaner.ex... Read more

Read other 3 answers
RELEVANCY SCORE 34.4

Hii sir, my computer is not starting instead it is displaying "cable not connected" and even i have replaced the display cable with the new one but no use at all. Can u please help me to solve this problem?
 

Read other answers
RELEVANCY SCORE 34.4

Hi,

Sorry if this is in the wrong section. I was wondering if anyone could help me regarding this strange DVD/CD-RW hardware problem. If I put an audio CD in either D (DVD) or E (CD-RW) drives, nothing will happen. If I go to "My Computer" and double-click the drive where to CD is in, I get an error message:

Yet, if I put a DVD into the D:\ drive it'll work perfectly. I've searched for this problem and apparently it has something to do with the regedit upperfilters and lowerfilters for the key 4D36E965-E325-11CE-BFC1-08002BE10318 – however I looked these up and the filters are missing from the registry key.

If anyone can help, I'd be really grateful.
 

Read other answers
RELEVANCY SCORE 34.4

Just before i went on holiday (this was 3 weeks ago) one of my 2 (SLI) 6800GT Graphics cards overheated and broke. I removed it switched to 1 graphics card and tried to get onto windows with no avail. I left til when i got back from holiday (Today) turned the computer on, it worked fine, minus the 1 graphics card, i then went to plug my headset (which i had in already and was using i just took it out to listen to music) plugged it back in and the computer crashed. Now i use Auidigy ZS Pro so i was plugging it in round the back. I rebooted the computer it loaded into windows fine except no sounds, and windows media player was saying there was a problem so i rebooted again and now, with the sound card in or out it freezes on the Start windows normally screen.

I am currently using my old HDD which is running fine without the card in, i havent tried it with it in yet as i might have to reboot the other HDD anyway because that is 200 gig and i would much prefer to use that one. If any of you have any ideas of how i can fix this without a reboot then please help.

Joe.

EDIT

When i try to boot from my normal HDD i click start windows normally and a white line goes accross the very bottom very quickly like a loading screen then does nothing.
 

A:Serious Hardware/OS problem.

Read other 9 answers
RELEVANCY SCORE 34.4

Hi,

I brought the extra hardware and the extra CD-Rom. I would install them on my computer. How do I clone (backup) everything from the normal hardware to another hardware. ?

Thanks,
 

A:hardware problem

Read other 11 answers
RELEVANCY SCORE 34.4

My original problem was that, one day I came back to my comp from sleep and it had shut itself down. I restarted, and after maybe 10 seconds, mouse and keyboard both would freeze. Same thing in safe mode, VGA and all of the options on F8. Took it to a tech and he reinstalled Windows XP using some disc he had and not the Acer eRecovery. After that it worked in safe mode but still froze on normal bootup. The mouse would skip around, then freeze altogether, and the keyboard wouldn't work. Took it back to the tech, who told me he couldn't get it to freeze.

When I got it home it worked, but it appeared to have some crappy resolution set on it, and I thought he may have ust put it on some basic resolution to "fix" the problem hoping I wouldn't notice. I got the driver, downloaded it, and it began to freeze up again. Therefore I did a reformat through eRecovery, and it loaded up to the screen that's all "Hey dude you got a new computer, let's set it up" and the MOUSE AND KEYBOARD FROZE AGAIN. You have to hold in the power button to reset it. Won't load at all in safe mode and tells me to "run setup again." I ran the reformat several times with the same result.

My specs are below, the only difference is that I have twice as much RAM as what's listed because we upgraded it. Thanks for any help anyone can offer.

Acer Aspire 3000

Processor
AMD Mobile Sempron 3000+ / 1.8 GHz
Chipset type
SiSM760G... Read more

A:Could this be a hardware problem?

First thing that jumped out at me was the fact that you upgraded ram. Does this by chance coincide with when the problems started? Take out the new ram for a while and see if that fixes the problem. It may be incompatible (or faulty) ram that is giving you the headaches.

Also, if you are able to boot your computer up, right click on ?my computer?, ?manage?, ?event viewer? (assuming you are running XP). Here you will find 3 categories and a list of each. Your system reports any errors it encounters here. You want to search in all three categories and look for any details with a red symbol by them. Yellow are also significant, but red ones are the ones to research first.

To research them, the best way is to look inside the details provided. There is a link in there that tells you to ?click for more details?. Do it. It?ll take you to the Microsoft site with some possible causes and solutions.

If the crashes seem related to a particular piece of hardware in your system, that is your hint. Update the drivers for that hardware and see if that fixes you up. For example, if you are getting constant error reports for your internet connection, try updating your NIC (network interface card) drivers.
 

Read other 6 answers
RELEVANCY SCORE 34.4

Ok, So I have been having this problem with my computer for a long time now. The mouse lags, the sound skips, and if I don't restart it right away it blue screens. Someone told me it was my power supply being to low (it was 350w) but I just got a new one today (850w) and it is still doing it.
Here is a video showing what is happing.

http://www.youtube.com/watch?v=e-7nE7osUs8

So if someone could please help that would be amazing.
 

A:Is this a hardware problem?

Closing duplicate thread too: http://forums.techguy.org/hardware/1033034-what-heck-wrong-my-computer.html
 

Read other 1 answers
RELEVANCY SCORE 34.4

I just put together a computer (AMD) ect and everything works great, but. Every once in a while the computer shuts off and wont start back up for a good bit, maybe 2 hours or longer. One time it poped when I surfing and didnt start back up until about 2 hours.

Ok, now here is what I have had to do to get it running again. I pulled the main plug that goes to the board off the plug in and then installed it back and now it works. I would hear a small click noise when I plugged it back on the board. I have had to do this several times and then it starts right up. I have giggled the wires, plug, and tried to press the connecter on more with no luck. I unplug the connector and reinstall and it works. Anyone know what could be the problem. This last time it wouldn't start up for a day until I unplugged the main connector. Thanks for any help that anyone might have.
 

A:Hardware problem, please help

Read other 7 answers
RELEVANCY SCORE 34.4

so I have a dell inspiron 531. it would not power on. so I switched psu, the new one has a test button on it. I can push the test button to make the fans spin and put power the the mb, while holding that, I can then push the front power button and boot the pc. the front power button does not work until I push the psu button. I tested the power supply in another pc and it worked fine. once the pc is booted, it runs fine. am I dealing with a mb issue?

Read other answers
RELEVANCY SCORE 34.4

hello,

I've got a problem with my computer

this are the specs:

motherboard: MSI B85-G41 Gaming

Power supply: 650 watt

OS: Windows 8

ram: 12gb

CPU: Intel Core i5-4670 @3.40 @3.40 GHz

Type of bits: x64


now is my problem,
everytime i place my video card, my computer doesnt want to start up, it doesnt even gets past the BIOS mode..
the strange thing is: when i remove it, and change a setting in the bios (becauze able to get into there when removed card) and i place the card back, it starts,

but when i get into my windows desktop screen, and i go to device management

it seems not to recoqnize my video card... it only show's me a card called: Microsoft Basic Display-adapter,
when i press to search for the newest software it says that are no new updates...

when i enter my bios with the settings changed so my card can stay in the motherboard, i get a overview of my motherboard and it DOES say that my nvidia card is installed on the motherboard (placed ).
but when i go to windows, it seems to dissapere....

when i change the settings in the bios to standard, and then try to run my computer with the card installed in my motherboard,
it seems not to even want to start my whole system.... *black screen*

can anyone help me please?.... been stuck with this for 3 days now, and no one knows an answer...

A:hardware problem

Once you get the GPU installed and your system recognizes it, you have to download the driver from Nvida or off the DVD that came with the GPU.

Drivers - Download NVIDIA Drivers

Read other 4 answers
RELEVANCY SCORE 34.4

I have a Sony DRX-800UL DVD/CD rewriteable drve that have had for about 18mths and has worked perfctly till now, it's as if my pc dosn't recognise it i cant record onto it and when i put in a disc to play nothing it just sits there when i go into start>my computer DVD/RW drive is highlighted but dosn't show the cd/dvd thats in there when i go to start>contropl panel>add hardware and highlight the drive it tells me that it is working as it should

now im stuck and confused

Please help thanks
 

A:Hardware problem please help

Go the Device Manager and uninstall the controller it is connected to. Shut down Windows, restart and let Windows automatically reinstall the device. If that doesn't help, you may have a bad drive. It happens.
 

Read other 8 answers
RELEVANCY SCORE 34.4

Hi...I am new to forums so I am not sure if I am in the right place for my question but here goes...just bought a new laptop charger on ebay for my Dell Inspiron 1720...it's a generic 90 watt charger and its triggering a black error message saying: "the ac power adaptor wattage & type cannot be determined". How do I set my machine to recognize the new charger? Thanks in advance.

A:Hardware Problem.

You should go with the manufacturer's (Dell's) charger rather than a generic. This one might not be compatible. You might also try contacting the generic charger's manufacturer.

Read other 1 answers
RELEVANCY SCORE 34.4

This message might be a lil long, sorry! I just finish upgrading from W2K to XP Everything is working fine, except for 2 things. I have been trying to figure out why but I cannot. I have 2 HDD, master and slave & 2 cd-drives, regular cd and a cd-rw. I made sure everything in the bios is right. Bios looks good, under device manager it shows them with no problem. But in Windows explorer I cannot see my slave HDD and in Nero burning software, it wont detect my cd-rw. Please help me!! I really appreciate it! I dont know what else to do, I have done everything I can, thanks in advance. -Robert
 

A:XP hardware problem

try uninstalling nero and reinstalling
if you are using nero 6 go into services and check the imapi cd burning is disabled
the h/d the only thing i can suggest is delete it from the device manager reboot and let windows reinstall it
 

Read other 2 answers
RELEVANCY SCORE 34.4

I'm quite sure it is, but the question is what. I recently built a new computer, an ASUS motherboard,http://www.newegg.com/Product/Product.aspx?Item=N82E16813131354 an AMD Athlon II X2, http://www.newegg.com/Product/Product.aspx?Item=N82E16819103687 2 gb G Skill ddr 2 800 ram, and a 250 gb Seagate hard drive http://www.newegg.com/Product/Product.aspx?Item=N82E16822148261. The problem starts when I try to install an OS. Everyone that I have tried to install has messed up somewhere. When I try to install Fedora 11, it freezes on the hard drive partitioning screen and will NEVER make it past that point. When I try to install Windows XP I get an error saying "Cannot boot from CD - memory overflow problem" or something similar. When I try to install Vista, the CD will not boot at all, it doesn't even act as if it's reading the disc. I managed to install Ubuntu once, but after about 30 minutes of use the screen went white, and up until the time prior to that the screen would flicker randomly every few minutes. I did not try to restart it because I don't really want to use Ubuntu right now. My goal is to install either XP or Vista. I am thinking that maybe there is a bad piece of hardware somewhere, but every single OS points me in a different direction. Perhaps the motherboard is bad? Or maybe nothing is wrong at all and I just set something up wrong. Anyone have any ideas? Any help would be truly appreciated.

Thanks
 

A:Do I have a hardware problem somewhere?

if u have 2 x1gig sticks of ram................ take 1 out and try to load the os, then try the other on its own
maybe bad ram stick(s)
 

Read other 2 answers
RELEVANCY SCORE 34.4

Hola, tengo problemas con mi tarjeta de red, en windows no me recibe ningun paquete, es decir no tengo acceso a nada y en linux mint me envia 4 paquetes me deja de enviar y posteriormente me hace lo mismo, oscila. Que puedo hacer?

A:Problem with my lan hardware

Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
 

German: HP Kundenforum
Spanish: Foro de usuarios de HP
French: Forum des utilisateurs
Portuguese: Fórum dos usuários HP
Chinese: ??????????
Korean: HP ??????
Thank you for your understanding

Read other 1 answers
RELEVANCY SCORE 34.4

hi, i own a hp pavilion dv9000 laptop, today when i was turning it on it was making a wierd noise that it never made b4 and as soon as its about to go to the start up screen it restarts...everytime..so i tried pressing f8 or f12 but b4 safe mode or the other screens pop up it restarts, the only mode i could do was f10. The day before my dad( doesnt know anything about computers, was watching it and turned it off by pre4ssing the off button) then this morning we're having trouble turning it back on, i think it's probably a hardware problem. Can anyone help me fix this problem?

A:hardware problem?

Quote:





Originally Posted by xxluckxx


hi, i own a hp pavilion dv9000 laptop, today when i was turning it on it was making a wierd noise that it never made b4 and as soon as its about to go to the start up screen it restarts...everytime..so i tried pressing f8 or f12 but b4 safe mode or the other screens pop up it restarts, the only mode i could do was f10. The day before my dad( doesnt know anything about computers, was watching it and turned it off by pre4ssing the off button) then this morning we're having trouble turning it back on, i think it's probably a hardware problem. Can anyone help me fix this problem?




Do you have an XP CD or can you borrow one, as you may be able to repair this problem with the recovery console. But you will need to have a CD to this unless the recovery console is installed. Do you get this option when you boot up?

Read other 4 answers
RELEVANCY SCORE 34.4

Hi everyone.
I have a custom computer that is shutting down after about 5 mins of up time, wether idle or running a program (any program). I'm suspecting a hardware problem like bad memory but figured I'd contact those better qualified to answer my questions with knowledge.

Just tell me what you need to know please, and I'll do my best to help you (help me).
 

A:Hardware problem, I think

Read other 16 answers
RELEVANCY SCORE 34.4

Hello Forum,

My son's laptop recently began freezing after boot-up. It hung at the desktop, couldn't open anything and had to be shutdown with the power button. It was also freezing in Safe mode. At one boot-up Windows informed me of a missing or corrupted file. I goggled the file and the results pointed to malware. Rather than attempt to clean it up, I chose to reformat XP.
Now when the computer boots up, frequently the Right click window will open either by itself or when you Left click the touchpad. Left clicking again causes it to close and immediately open again. This is the window you get when you Right click on empty desktop. These actions also happens when using a usb mouse and was part of the problem prior to reformatting.
On one occasion, the computer froze up, reviewing the task manager showed the cpu usage at zero for about a minute until it finally unlocked. Not sure what else it's doing because no one is using it.
Thanks for any positive feedback.

A:OS or Hardware Problem?

I would start with running diagnostics on the hard drive

http://www.tacktech.com/display.cfm?ttid=287

See this for how to make a bootable cd

Read other 7 answers
RELEVANCY SCORE 34.4

i was running a hardware scan and it came up failed and this reference code WPE001001-RL8BGD does anyone know what this means and how to fix it.

Read other answers
RELEVANCY SCORE 34.4

please forgive the noobyness of this post...

I bought and built the computer about a year ago. the only problem I've had with it up untill now is the power supply going out which was about 5-6 months after having it.

here is a summary of what's going on with my computer:
it froze one day after I got home from work and then I moved the mouse and it automatically restarted and then tried to Boot from CD and then windows wouldn't boot at all.

I reformatted and reinstalled windows XP with service pack 2 and now the display is messed up. I tried to install the video card drivers and my computer restarts 1/2 way through those, but I did manage to install the motherboard and CPU drivers...

what do I mean by "the display is messed up"? Well right now as I am typing this, there are lines everywhere, and it looks all glitchy/crappy and is seeming getting worse as I use the internet more and more...

I replaced the PSU because the one that came with my case died...

my friend who is more computer suave took a look at it and said it is most likely the video card and/or the PSU, but then when I explained the problem to a couple of co-workers they said it sounds like a Motherboard or Memory problem.

I'm just at a total loss. I don't want to buy new parts that aren't going to fix the problem.

here is a list of what my current machine consists of: (courtesy of my newegg invoices)
-POWMAX CP0327PL-4 Window Black/Silver SGCC ATX Mid Tower Computer ... Read more

A:Hardware Problem?

Read other 16 answers
RELEVANCY SCORE 34.4

I just built my first PC and i keep getting these Computer freezes where the whole system locks up and NOTHING is responsive. It usually occures when i am loading into a game or something of that matter. Earlier today i was playing H1Z1 and i switched from high settings to ultra and the whole computer completely freezed up! rarely it will just freeze on the desktop. Please help. Ask anything.
 
Mother Board: Asus Sabertootth 990FX R2.0
Cpu: AMD Fx 9590 Temp: Around 32-42 degrees Celcius
Gpu: Evga Gtx 970 ACX 2.0 Superclocked Temp: 35-53 degrees Celcius
Ram: 8Gb Corsair Vengence (The Blue Stick)
 

Read other answers
RELEVANCY SCORE 34.4

I had to reset my computer to factory settings awhile back. I've done nothing to it except download advanced system optimizer and windows antivirus. This was a miracle alone due to the fact that my Computer locks up for extensive periods of time and will barely ever finish a task; such as transferring a picture to USB drive, scan, or any click command. It has never done this before the reset. I've had to reset my laptop several times before, it got to a point everytime I slipped up and left the battery unplugged with it running, start up repair would start and just about everytime could not fix itself leaving me no choice but to reset. Quite aggravating. With spurts of patience here and there I've managed to update all drivers, scan, use windows solution and nothing works. Sometimes it will run smooth for two minutes, then it's waiting and quite possibly never accomplish anything. I can't get my pictures which is my own fault for not backing up. I've tried linking my other laptop to get the pictures and the bar never moves once it gets towards the end. Any ideas?

A:help is this a hardware problem?

With a laptop you do not have a lot of hardware debugging choices. But I would try this:

1. Take one of the memory Dimms out and run it on just one Dimm. If it is still on the blink, try the other Dimm. If it runs OK, you know it is the memory Dimm in question and can change that.

2. Burn a Linux CD - e.g. Puppy because it is small. Run that from the CD reader (change the BIOS boot sequence). If that works well, you know it is a Windows problem and we can dig further.

You can also run step 2 before step 1 if that is more convenient. If none of those steps shed any light on the problem, we'll have to regroup. There can be many other causes.

Read other 9 answers
RELEVANCY SCORE 34.4

Dear sir
I have dell gx620 dual core system, I just update my BIOS for installing and when it again start, it start for few seconds than suddenly my power led become yellow color blinking and showing nothing on the screen.

Please guide me in this regard.
 

A:hardware problem

Read other 7 answers
RELEVANCY SCORE 34.4

i'm using an athlon cpu with a jetway board and recently my pc just shuts down and restarts when im using it. no matter waht application i've been using sometimes after 10+ mins or less. then i tried to remove all hardwares and inserted it again. at first it works it doesnt restart but when i use games such as nba and nsfu after several mins it shuts down and restarts. so i cant play games so i tried to format my disk but after formatting i cant reinstall xp my pc works to slow as if it was an pentium1 with 8mb of ram. it takes too long to go to the windows setup. it reads data too slow. what could be wrong? need your help pls thanks
 

A:Hardware problem?

you need to clean the harddrive out good, FDisk is preferred, but ask more people on this site and they may know of some good programs to clear it out.
 

Read other 3 answers
RELEVANCY SCORE 34.4

my bluetooth device is installed but couldn't transfer file either from laptop to mobile or mobile to laptop, though it shows paired and connected. whenever i try to send or recieve file it shows a message" an address incompatible with the requested protocol was used ". in device manager there is unknown device which id is "ACPI\VEN_INT&DEV_3400", another device id "PCI\VEN_8086&DEV_1903&SUBSYS_81EC103C&REV_08", another id "PCI\VEN_8086&DEV_9D3A&SUBSYS_81EC103C&REV_21" . i need driver for these.  plz do reply asap

Read other answers
RELEVANCY SCORE 34.4

My son has a Sony Vaio laptop that he is continually downloading music and video onto. He has up to date McAfee running on it, but apparently some critter got through. He says he scanned when he noticed problems and the scan did turn up something that was unremovable by McAfee. He did NOT note the name of the virus. By the time he reported the problem to me the computer will not boot at all. I get "Operating System not found" on a black screen with nothing else. When I attempt to boot with the XP OS disc in it, I get the blue install/repair screen, but upon trying each of those options I once again get a black screen telling me that no hard drive is detected. How big of trouble am I in?
 

A:BIG PROBLEM Could be OS OR Hardware

Read other 16 answers
RELEVANCY SCORE 34.4

system take boot slowly

A:hardware problem

could you be more specific, what kind of computer is? how much memory ram have?

Read other 2 answers
RELEVANCY SCORE 34.4

A few weeks back I was here, at the video card forums asking for some hardware upgrade advice. The threads are these where all my system specs are already available: Once again...PSU and Graphics combo
and What Video Card?

My problem is this- After installing the PSU, the GPU and the RAM i plugged my computer and turned it on. Everything loaded up as usual, and I went on ahead to check the RAM, the system recognize it properly, all is good! Now, I moved on to the Graphics Card. I take out the cd, put it in and start the installation. When I click for it to begin, after a while an error with a bunch of weird numbers appeared and I couldn't proceed with the installation. After a few failed attempts to install, I figured the only problem seem to be with my computer not wanting to accept the graphics card's installation so I decided to take the card out and start it again. It loads, but it's MUCH more slower in start-up and after everything loads... BAM! The computer sort of freezes/ crashes and I can't do anything. I tried restarting a few times but a few minutes after the painfully slow start-up, it still happens.

I don't think the problem is with the PSU, everything turns on correctly. Im sure it ain't with the RAM either since the computer recognizes it and shows it. The problem is with the GPU which I already took out but it seems that it might have done some damage...and I have no idea why.

Does anybody have a clue as to what's wrong or what can I do?

A:New hardware, problem with XP

I would start with the GPU drivers, which are the source of most problems. Chances are, there are newer drivers on the manufacturer's website than on the CD. Uninstall any of the drivers you installed off the cd, then download the latest video drivers and give it a go.

Read other 6 answers
RELEVANCY SCORE 34.4

Does anyone know where the Computer Builder service that Newegg offers is? I want to choose a computer and then select upgrades to specific parts of it.

I heard Newegg had one, but if they don't, does anyone know anyone who does?
 

A:I don't have a hardware problem I do need help though.

bump
 

Read other 3 answers
RELEVANCY SCORE 34.4

Okay, so I was just browsing through the web when this black windows box kept popping up nonstop. I got really annoyed and decided to restart my computer, but when it restarted, I noticed it didn't restart properly because I saw this popup called Windows Recovery saying that my hardware has a lot of problems and that most cannot be fixed. Then my icons and programs started to disappear from my computer and alerts popping up saying something about my computer cannot scan or detect a hardware. On my desktop, all my icons are gone as if nothing existed on my computer. All my programs and everything essential to maintain my computer just disappear. Is this a bad virus or did my hardware just crashed? Really in need of help. I don't want to pay a lot to get it fix unless I really have to.

I'm using a Dell Windows XP. I'm not good with computers, so I don't know what else to provide.

A:Hardware problem

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan"... Read more

Read other 6 answers
RELEVANCY SCORE 34.4

My system crashes. often. most reliably it crashes when i am playing diablo 2 on battlenet. it could go an hour, or maybe 3 minutes. it seems to go the busier the scenes are, though sometimes crashes when nothing is going on. sometimes it just reboots, sometimes the game just crashes and i can restart again right away.
i upgraded my video card and the crashes are still happening.
also, stable programs like yahoo msgr crash with a "yahoo messenger has a problem and needs to close now" window. control panel, my computer, random system software hangs up and needs to be closed via task manager (program not responding).
sometimes "services and apps" goes awry and i get a window telling me to save my work in 60 secs because it's about to reboot.
i reformatted not long ago. also i defrag, and scan for everything religiously (ad-ware too, i run all the major programs). i have 4 fans and the hard drive is sitting under the air conditioner.
arg!
 

A:could this be a hardware problem?

Read other 11 answers
RELEVANCY SCORE 34.4

i posted this in the windows xp section and got a reply that the problem might be hardware related. here is the original post:

ok i need to post this quick before my computer restarts again because this is the third time i've tried. i recently installed a new motherboard after my old one died on me. ever since i reformatted and reinstalled windows xp pro programs i am running have had errors and needed to close for no apparent reason, including windows explorer. i have all the windows updates, adaware and spybot are clean, i cant finish a virus scan without it restarting but i reformatted yesterday and stuff so i doubt its a virus. my system configuration is listed below. any ideas?Click to expand...

any idea of what it could be?
 

A:possible hardware problem?

Read other 16 answers
RELEVANCY SCORE 34.4

i get a gray volume box in middle of screen comes and goes whenever it wants to. ive ran norton and spybot and nothings help. i dont trust a lot of the free spyware programs.starting to think its not a ad ware problem at all??? a real pain
 

A:can anyone help is it a hardware problem??

Does your monitor have built in speakers ? Maybe it the monitor's on screen controller.
 

Read other 3 answers