Over 1 million tech questions and answers.

NFS/License Server Issue

Q: NFS/License Server Issue

Linux running Fedora 14 is the NFS server and License server for my Toon Boom Animation software. Mac Pro running Mountain Lion is the client.

This set up previously worked but after a power outage the software will not open on the Mac since it cannot verify the license with the linux license server.

Network setup:

Motorola Uverse Wireless Router/Modem ---> TrendNet Switch ---> Server and Client

Manual IP addresses set for the server and client

I have to use NFS Manager on the Mac to be able to view and edit the NFS mounting, but upon starting it, I recieve an error message saying that the Mac has reverted back to Bonjour only operation and that there is a possible problem with the forward and backward name resolutions.

I think the router is handling the DNS, and I don't know how to resolve the issue... I'm not all that knowledgeable about advanced networking and have been barely getting by until now.

Both computers are talking to each other since I can access files that are on the Mac from the Linux machine via SMB. Haven't figured out how to access linux files from the Mac though.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: NFS/License Server Issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 61.2

Hi folks,
I am working with a company (that I have actually worked with for over 10 years on a consulting basis) and we are auditing our Microsoft Windows Server and server product licenses and preparing to upgrade Windows Server products.  We have ran into a snag, where the former System Administrator left the company a few years ago, however it was understood that the information regarding the VLSC was transferred to another partner in the company.  A new Systems Administrator has taken over, and we have determined that we do not have this information, including a Microsoft account username and password to access the VLSC and our Windows Server 2008R2 product keys, license agreements, SKUs, and downloads.  Unfortunately, the situation became took a turn for the worse about three months ago when the partner that had this information passed away.  No one at the company has access to this login information.  I currently administer most of their licensing, and have access to their much of their licensing information, download, product keys, etc., but I am clearly missing some very important ones.  I called Microsoft and they were of no assistance.  Since I am an administrator on the network, I can create a mailbox that the VLSC was probably originally registered under, however the VLSC says that Microsoft account is not even valid, not even prompting for the password.
I have a mailbox on their Exchange Server for their domain to prove I am ass... Read more

Read other answers
RELEVANCY SCORE 57.2

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 55.2

I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...

1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?

2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?
 

A:Terminal Server license server(s)? RDP client for Windows2K?

I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.

For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.
 

Read other 1 answers
RELEVANCY SCORE 51.6

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 50.8

I found that SBS has a 1 time deal to use the key, and then even if installing on the same machine, you have to call to get a new key. I wrote down the key and wonder if I can reactivate a reinstall using the same key. I am hoping I do not need to do a scratch install, but if I do, I dont want to have to call the indians if I dont need to.
 

A:Server License Key

Read other 6 answers
RELEVANCY SCORE 49.6

Does anybody know how can I remove a license from a Terminal Server?
I don't want to remove a license server I just want to remove a specific license from the license server to use that license for another computer. when I go to Terminal Services licensing Tool in Windows I only get the option to diactivate a licensing server.
I'm using Win 2003.

thanks,

Steve
 

Read other answers
RELEVANCY SCORE 49.6

I'm possibly interested in buying a license for Windows Server 2012/16 Standard Edition. How can I do that?

I've searched around on the net. The Microsoft Store is out of stock of the only version they offer. After an hour and half on the phone with Microsoft they weren't able to get close to offering a license for sale. Apparently, you can't simply purchase a license online and download an installation image. I've noticed a few OEM licenses for sale from 3rd party resellers I am not comfortable with and I prefer a full retail version anyway.

So how do you buy a license from a reputable organization?

Thanks.

A:Buying a Windows Server License

The Server stuff was just released at Ignite a week or two ago. I have to imagine MS hasn't fully rolled things out just yet. This should clear up before October ends, but in the meantime, here is some stuff to read and puzzle over:
1. search for "Windows Server 2016 licensing FAQ" in Google or wherever (can't produce a workable PDF for the resulting document)
2. Windows Server 2016 Licensing Pricing | Microsoft

When MS gets around to putting it up for retail sale, you'll be able to find it easily using Google shopping, or even the Windows Store. Not yet, though...
HTH,
--Ed--

Read other 1 answers
RELEVANCY SCORE 49.6

Hello,

After using Capture One Pro version 4 RAW image workflow software from Phase One for a few weeks with no problems (and version 3 for a couple of years before that), suddenly the application has reverted from the Pro version which I paid for to the less capable Standard version.

Between my description of events and screenshots, Phase One support has determined that the application cannot reach the company's activation server to verify the status of my license code. My user account on their site says I have 2 free upgrades and 2 activations remaining. In the app, it says I have zero and zero.

I've tried deactivating and reactivating the software, but I get the error: Capture One was unable to deactivate the software on the server. This happens whether I try to connect from home or from my studio.

I'm running Vista Home Premium SP1.

Phase One support suggested creating a new Windows user account and trying it from there, but that didn't work. I've also tried uninstalling and reinstalling the software, and completely disabling my firewall (AVG 8).

The last from Phase One support (in Asia, who can reply no more than once a day ):

The activation procedure is using the following:

activate.phaseone.com that has IP address 68.195.194.106
Mac uses port 80 (http)
PC is also port 80 but uses also SOAP commands besides http
Also every machine needs to be able to ping itself on 128.0.0.1

That is all that is needed to run activation procedure as... Read more

A:App can't reach license activation server

I'd be surprised if machines can ping themselves on 128.0.0.1, since the loopback address is 127.0.0.1!

I wonder what other misconceptions they have?

BTW, that IP address for activation is in NJ, not Asia.

I think I'd connected directly to my broadband modem, disable any firewalls, and run the activation. If that doesn't do it, you're pretty much out of luck.
 

Read other 3 answers
RELEVANCY SCORE 49.2

I tried installing Abaqus 6.9 on window 7 and 10 but i get thesame issue with them, asking me to activate my license server. i tried activating the license server but i always get an error message. what can i do? i've tried downloading another FLEXnet server
but still thesame problem

Read other answers
RELEVANCY SCORE 49.2

Hi there,
i need your help. which licence & how many qty i need. i am confused.
WinSvrCAL 2016 SNGL OLP NL DvcCAL
WinSvrCAL 2016 SNGL OLP NL UsrCAL
WinSvrSTDCore 2016 SNGL OLP 16Lic NL CoreLic
WinSvrSTDCore 2016 SNGL OLP 2Lic NL CoreLicTq





WinSvrCAL 2016 SNGL OLP NL DvcCAL

Read other answers
RELEVANCY SCORE 49.2

I am a lab technician at my local college and we have a Windows 2000 server computer that runs various applications for three labs. We have both Win98 and Win2000 clients. We just installed the 2000 clients this semester, but we have been having numerous problems. My lastest problem is with drive mapping. Before we installed the new Win2000 computers, all the machines had the application drive D: mapped on all the machines and we never had any problems. But as soon as I mapped the drives on the 2000 clients, all the clients started getting errors that the number of connections to the server had reached its limit. I checked the logs on the server and it says it has been getting error with SMBserver license. I also saw that Windows 2000 pro cannot have over 10 connections max. I don't know if this has anything to do with it. Any help is greatly appreciated. The new systems are Pentium 4 2.53ghz with 512mb of ram running Windows 2000 professional.
 

Read other answers
RELEVANCY SCORE 48.8

Hello my name is Adam. I am a desktop/lan admin for a warehouse supply company in New York. We run a strictly Windows 2000 domain with about 70 computers and maybe 3 or 4 Windows XP machines. I recently enabled a Terminal Services Server to allow 3 or 4 of my users to run database intensive Apps on the server. The reason for this is when they use specific functions in our "in house application" the app freezes up until it has finished its process (allocation of goods for large orders, takes about an hour tops). The app freezes up to do its job and the user is left with nothing to do because they cant touch the app until its done. So by enabling terminal services for them, they can run there allocations on the Terminal server, minimize it and keep doing there work on there computers.

Now, along with the Terminal Service Server, I am aware I need a Terminal service license server enabled on the network within 90 days. I have yet to enable a license server because I am somewhat unclear on its neccesity. I have read in the microsoft documentation

http://www.microsoft.com/technet/pro...s/default.mspx

that machines with Windows 2000 on them already have built in licenses and therefore you do not need to purchase additional licenses. The documentation also states that if you do not enable a license server, anyone without a pre issued license will not be able to connect. My question is this, if I am only connecting to the terminal services server via Windows 2000 Machin... Read more

A:Windows 2000 Terminal Services License Server

Read other 7 answers
RELEVANCY SCORE 48.8

Please let me know about windows server external connector license.

1. How to activate(apply) the windows server external connector license?

I purchased a windows server 2019 license and a windows server external connector 2019 license.
Windows server license is activated by entering the product key. But I wonder how to activate Windows server external connector license. I would appreciate if you can tell me how to activate it.


2. What is the difference between windows remote desktop service external connector and windows server external connector?


Thank you.

Read other answers
RELEVANCY SCORE 48.8

Hello my name is Adam. I am a desktop/lan admin for a warehouse supply company in New York. We run a strictly Windows 2000 domain with about 70 computers and maybe 3 or 4 Windows XP machines. I recently enabled a Terminal Services Server to allow 3 or 4 of my users to run database intensive Apps on the server. The reason for this is when they use specific functions in our "in house application" the app freezes up until it has finished its process (allocation of goods for large orders, takes about an hour tops). The app freezes up to do its job and the user is left with nothing to do because they cant touch the app until its done. So by enabling terminal services for them, they can run there allocations on the Terminal server, minimize it and keep doing there work on there computers.

Now, along with the Terminal Service Server, I am aware I need a Terminal service license server enabled on the network within 90 days. I have yet to enable a license server because I am somewhat unclear on its neccesity. I have read in the microsoft documentation

http://www.microsoft.com/technet/prodtechnol/win2kts/default.mspx

that machines with Windows 2000 on them already have built in licenses and therefore you do not need to purchase additional licenses. The documentation also states that if you do not enable a license server, anyone without a pre issued license will not be able to connect. My question is this, if I am only connecting to the terminal services server via Windows... Read more

A:Windows 2000 Terminal Services License Server

IM moving my post to the Windows forum. Sorry bout that
 

Read other 1 answers
RELEVANCY SCORE 48

I have an old (Pentium 233) NT 4.0 server. We want to get a new (Pentium III 733) and put Windows 2000 Server on it. I can get the upgrade with 10 users for MUCH cheaper than the full version. When I go to install the upgrade on a blank hard drive, will it require me to have NT 4 Server already installed, or can it just verify that I have the CD like the Win95 Upgrade does?
 

A:{Advice Offered} - Win2k Server license question (upgrade?)

I'm not certain if Win2k server is the same, but I've installed Win2K Pro on a few PC's with uprade discs on a clean HD and only had to insert a CD into the drive during setup to verify that I owned a previous version.
 

Read other 2 answers
RELEVANCY SCORE 47.6

Purchased software that requires a license to use it. Unable to activate license .
 

Read other answers
RELEVANCY SCORE 47.2

Hi guys. I have a problem.

I recently purched a family 3 pack of Windows 7 home premium. I installed one successfully.

Then I installed another one on a laptop and got it activated... but then the laptop had a hardware failure and is no longer usable.

Is there a way I can use that license over since the computer is dead... or am I SOL and going to have to buy a new one? I didn't even get to use the computer a whole week.

Any suggestions are much appreciated. Thanks.

A:Windows 7 license issue

Provided the key will never be used on any other machine anywhere else again. You may have luck activating it on another system. You will more than likely have to use the call in feature to get the activation to pass though, and if it's used on another system configuration again after that they will most likely completely ban the serial.

Read other 6 answers
RELEVANCY SCORE 47.2

I have a genuine copy of windows vista and have had for the last 3 -4 years. Lately i keep getting notifications that my copy of microsoft windows is not genuine. There is a link i can click to go validate online but it doesnt seem to go anywhere. So i reinstalled windows using the original disk inputting the product key, a day later getting same notifications. Any ideas on how to fix this?
Also getting a message saying an unauthorized change was made to my license
 

A:Windows License issue

You will need to give Microsoft a call for licensing issues.

http://support.microsoft.com/common/international.aspx
 

Read other 3 answers
RELEVANCY SCORE 47.2

I keep getting a pop up screen saying your windows license will expire soon and I can close it or go to settings and I can't close any more I don't know what to do in settings it's not clear and it's new to me ..please help it's a HP laptop..Netflix is all I have rite now because stuck in hospital...
 

Read other answers
RELEVANCY SCORE 47.2

Hi to anyone who reads this. I tried calling the Microsoft line but you wait forever... Ok I have installed and deactivated my Windows 10 pro keys a couple of times on my new build. Now just one day I had issues with my motherboard and could not boot into windows anymore. So my copy of Windows 10 was installed on a M. 2 drive. I send my motherboard in for repair since in was 5 months old. Asus website says it was dead but they has to send it in to check. It was a Asus Z170 Deluxe. Problem is because I could not boot into Windows to deactivate with two commands in command prompt. So a week later I got the Asus Maximus Viii Hero motherboard just while I wait because it can take forever before I get my new Asus Z170 Deluxe motherboard back. After alot of problems I got the Maximum Viii hero to read the m. 2 drive where Windows 10 pro was installed on. It did boot and I did do the deactivation commands in command prompt so reinstall Windows new again. Can't do that since it's a new motherboard... Now I went back to Windows 8. 1 but would like to have Windows 10 back but don't know how to clear my license to new. I have the original installation disk but the key is not excepted. It's not installed on the other computer because I don't think I'll get the old motherboard back but even I do Windows will say that licensing is used on a different computer were its just in its original disk folder. Does this mean I have to go buy a new copy of Windows 10? If that's the case it sucks... Read more

Read other answers
RELEVANCY SCORE 47.2

Hello, i've recently purchased a commercial license for 3 pcs for Kaspersky Internet Security. I used it on 2 of my pcs, the first one had 335 days remaining and the second has 345 . However, i've formated my hard disk (of the first pc) due to some issues and reinstalled my OS. Now kasper shows that i have 358 days remaining. Did it count it as a new pc?
If it did i shall have 365 days, if it didn't i shall have 335. According to my info i have the right to reset the pc without having my license reset.

A:Issue with Kaspersky license

If it did, you are only short 7 days, if it didnt you're ahead of the game almost a month...

Read other 3 answers
RELEVANCY SCORE 47.2

I am rebuilding a server due to some issues w/ the raid configuration it was originally built.  I want to move the license key from the old server to the new one(same hardware) but the License Key and Checksum that are on the old server I can not get to work on the new one.  I don't have my orginal document for the key so I am not sure what all information is needed.

A:Open VMS 8.4 I64 BOE License Key Issue

The correct company for OpenVMS is Hewlett Packard Enterprise:http://community.hpe.com/t5/System-Management/bd-p/itrc-289

Read other 1 answers
RELEVANCY SCORE 47.2

Hi guys, quick question:

I have a eMachines Desktop PC here, and the Label on the back says Windows XP Media Center Edition 2005, so I got a OEM Windows Media Center 2005 CD.....and the License key didnt work.....after trying different copies of the CD I decided to try something crazy and I tried a XP Pro OEM disc....and the key did work with that one.......

why is that? is XP pro eventually going to reject the key or not perform updates or something like that?

Thanks guys.....
 

A:License Key Label issue....!

Why did you get a cd ?
 

Read other 3 answers
RELEVANCY SCORE 47.2

Hi to anyone who reads this. I tried calling the Microsoft line but you wait forever... Ok I have installed and deactivated my Windows 10 pro keys a couple of times on my new build. Now just one day I had issues with my motherboard and could not boot into windows anymore. So my copy of Windows 10 was installed on a M. 2 drive. I send my motherboard in for repair since in was 5 months old. Asus website says it was dead but they has to send it in to check. It was a Asus Z170 Deluxe. Problem is because I could not boot into Windows to deactivate with two commands in command prompt. So a week later I got the Asus Maximus Viii Hero motherboard just while I wait because it can take forever before I get my new Asus Z170 Deluxe motherboard back. After alot of problems I got the Maximum Viii hero to read the m. 2 drive where Windows 10 pro was installed on. It did boot and I did do the deactivation commands in command prompt so reinstall Windows new again. Can't do that since it's a new motherboard... Now I went back to Windows 8. 1 but would like to have Windows 10 back but don't know how to clear my license to new. I have the original installation disk but the key is not excepted. It's not installed on the other computer because I don't think I'll get the old motherboard back but even I do Windows will say that licensing is used on a different computer were its just in its original disk folder. Does this mean I have to go buy a new copy of Windows 10? If that's the case it sucks... Read more

Read other answers
RELEVANCY SCORE 46.4

Hi....Greetings of the day,This is Gopi Krishna, yesterday i registered in hp lad runner with my personal mail id & i downloaded software & i installed it in my own pc. I think it give 50 users free license. After sucessfull installation when i open the controller it displaying pop up message like your license is error pls contact to hp support center or it asking enter your license key where can i found my license key any one help me pls..... thanks in advance..... Thanks & Regards,Gopi Krishna.N.P

A:HP Load Runner License Issue

 As mentioned to you before:http://h30434.www3.hp.com/t5/Commercial-PC-Software/Unable-to-install-load-runner/m-p/5693746 This is the wrong company for Servers, Storage, Software, and Networking. Please use the Hewlett Packard Enterprise Community:http://community.hpe.com/t5/LoadRunner-Practitioners-Forum/bd-p/sws-LoadRunner_SF

Read other 1 answers
RELEVANCY SCORE 46.4

We recently received a new license key for ATA, but we see no option to change the license key via the web interface.
Does anyone know the proper procedure for changing the ATA license key?
Thanks in advance.

Read other answers
RELEVANCY SCORE 46.4

As my Windows XP would not boot anymore after being affected by virus I moved the hard drives to another computer (USB container) and cleaned the viruses. When I tried to re-install windows it said windows already existed in the WINDOWS folder and as I did not want to delete the folder I asked to install it in a new folder (called it WIN). After the new windows came up I copied the files from the repair folder in the non-working windows to the config folder. This time when I rebooted my old installation I was happy that windows came up but the moment I log on it says that windows cannot verify the license and it exists. Is there a way for me to re-install (like an update) on the old folder so it does not say it is already installed and only choice is to delete the folder? Also is there some way I can salvage my old programs etc. by copying files either from the old WINDOWS folder to the new WIN folder or viceversa. Even though all my programs are installed on a completely diferent drive the old WINDOWS folder must have files related to those programs in the system32 folder and also the old registry which I am hoping I can save.

Thank You
 

A:Solved: Windows XP license issue

Read other 16 answers
RELEVANCY SCORE 46

I decided to do a little spring cleaning and clean (re)install Windows 8.1 Pro to my Bootcamp partition. I downloaded the Windows 8 Pro files by choosing create install media (ESD-USB). I actually had trouble getting this far as my Windows-route was Windows 8 Release Preview license -> Windows 8 Pro Upgrade license (bought from Microsoft) -> Windows 8.1 Pro Update. Anyway, I now thought that I could just erase the Bootcamp partition, create a new one and clean install Windows 8 Pro with the ESD-USB media. Unfortunately this is where I realized that I had made a mistake. Firstly, my iMac didn't support Bootcamp installation with USB media. I then chose to go the virtual machine route (which is handier anyway as I hated the constant booting when switch from OS X to Windows) and downloaded Parallels. The Parallels installer accepted my Windows 8 Pro license and installed Windows 8 Pro. After some tweaking, Windows accepted the license key as well but, alas, informed me that the key was being used by another computer. I did a little reading and apparently I should have deauthorized Windows before erasing it. I also read that even though I'm using the same computer and the same hard drive, Bootcamp (partition) and Parallels (virtual machine) might be interpreted as being separate as far as licensing is concerned.

Could someone help find a way out of this mess? What I have is Windows 8 Pro Upgrade key and a Windows 8 Pro ESD-USB media. I want to install Windows 8 Pro (and o... Read more

Read other answers
RELEVANCY SCORE 45.6

Hi,
In a Siemens WinCC editor on a PC with Win7 SP1 32-bit we use the ActiveX Microsoft DTPicker 6.0 (SP4). MS Visual Studio 2008 V 9.0.30729.4462 QFE is installed. However, the error message is sent by MS: License information not found. You do not possess a
valid license for the design mode.
What can we do? 
Thanks.
Michael

Read other answers
RELEVANCY SCORE 45.6

Did all the pre-checks on my W7 ultimate install
Went ahead and did W10 upgrade it failed - (working on an USB issue) however when I rolled back from W10 the W7 quickly came back and all working ... but now fins original Product key has been wiped and a temporary key installed.

When I try to put in my original key (have a print out of all keys for PC) it fails with error code 0xC004E003

I have gone to computer > system > change product key but it will not accept my key

It points you to Microsoft pone line ... but tat just points you to an automated system that wants installation ID not product key

I have the original pre-licensed volume install disc - can I get it to 'reset/setup' new key without doing a reinstall.

A:W10 upgrade failed - License key issue on roll back

I have the original pre-licensed volume install disc



This might be your problem right there.....if this is infact a volume licensed key and not a standard OEM/Retail key. Those volume licensed key play by a different set of rules, which I'm not familiar with.

Volume Activation for Windows 10 (Windows 10)
Activate using Key Management Service (Windows 10)
The Ultimate Windows 10 Activation License FAQ

Read other 2 answers
RELEVANCY SCORE 44.8

Hi,

I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.

Steps taken so far.

Checked and reset permission levels on the share.
Recreated new shares from scratch for testing.
Disabled and enabled offline files on the client computer and cleared the offline cache.
Check various registry entry settings.
Disabled cashing on the File server.
Tested with XP the issue does not exist with XP.

I have spent hours researching this error online to no avail.

The clients are running Windows 7 Enterprise 64 bit
The File server is Server 2003 Standard 32 bit with SP2

Any help or ideas would be most welcome.

A:Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.

I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.

No way for me to recreate this problem but apparently others have the same problem.

Offline created files disappear after re-connect

Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs

Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)

The Group Policy settings in the next link may have an effect on this problem.

http://mcpmag.com/articles/2003/11/0...ine-files.aspx

Read other 3 answers
RELEVANCY SCORE 44.8

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 44.8

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 44.4

I'm getting now this error now after 1 year
We been using VDI-Windows 7 for more  than a year , suddenly we got this message

Can please advise what wrong in VDI image ?
Observation :
> office and Windows OS is NOT immediately activate through KMS

> delay of 1 to 2 minutes before successfully activated the windows / MS office  

Error :
License Status: Additional grace period (KMS license expired or hardware out of tolerance)
---------------------------
Windows Script Host
---------------------------
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: ae2ee509-1b34-41c0-acb7-6d4650168915
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00392-00170-918-500000-03-1033-7601.0000-0602015
Installation ID: 008975677433059582065751136626964085574702997444417101
Partial Product Key: HVTHH
License Status: Additional grace period (KMS license expired or hardware out of tolerance)
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 3
Trusted time: 18/1/2016 3:45:43 PM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.


Robert

Read other answers
RELEVANCY SCORE 44

Hi,
Our company buy almost 6 months ago the Microsoft Action Pack that includes Visual Studio 2013 with online login to Access the program.  A few days ago I started having this error message and I cannot access the application anymore. 
Any advice on how to fix this?  I already contacted the MSDN support and they ask me to create a topic in this forum for help.  Or they will have to ask me for small fee($$$) to resolve their problem.

Read other answers
RELEVANCY SCORE 44

Windows 7 pro is OEM with License key built-in on board by Supplier. And this license probably oem shared one , and can not be dug  out from the computer. Recover CD installed with package is windows 8 pro without license nor.


Can I use a purchased windows 10 pro license install in this computer ?  Won't be duplicated license ?  If valid , how to removed the windows 7 pro on board license please ?

Read other answers
RELEVANCY SCORE 43.6

Hello,

This machine is a very common model in my environment and I have done many fresh windows installations using the OEM license key without issue. however, on this particular machine, it reports it cannot activate because it cannot contact the KMS for activation.
Again, to clarify, this is the OEM product key that has been automatically pulled over from UEFI and NOT a MAK/KMS key.


I've run diagnostics as typically requested for this type of issue and can provide any additional information you might need. Any help you can offer would be greatly appreciated!!


The failure event:

Log Name:      Application
Source:        Microsoft-Windows-Security-SPP
Date:          11/2/2015 10:21:03 AM
Event ID:      8198
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Temp-PC
Description:
License Activation (slui.exe) failed with the following error code:
hr=0xC004F074
Command-line arguments:
RuleId=eeba1977-569e-4571-b639-7623d8bfecc0;Action=AutoActivate;AppId=55c92734-d682-4d71-983e-d6ec3f16059f;SkuId=c06b6981-d7fd-4a35-b7b4-054742b7af67;NotificationInterval=1440;Trigger=NetworkAvailable
Event Xml:
< Event xmlns="http://schemas.micr... Read more

Read other answers
RELEVANCY SCORE 42.8

Hi
I am running Win8.1 Home on my laptop.  I have access to a Win8.1 Pro (volume license) through my university. 

My question is - how do I do the upgrade, keeping all my data and system settings intact?
(I have looked at the info online, and the closest I have come to an answer is 'you need media, this cannot be done through the online Store'.  I have an <Win8.1-Pro-x64 .ISO> disc, is this sufficient?)


Thanks for any pointers.

Read other answers
RELEVANCY SCORE 41.6

I'm new to the forum but have a problem that I want make the right decision on. I play Aces High II which is a flight simulation game. It may not be as hard core as Battlefield 3 but they do keep upgrading to high res graphics. My computer is a prebuilt Dell Studio XPS 8000. Intel i7 core 860 processor @ 2.8GHz. Graphics card a Nvidia geforce GTS 240. 8 Mb memory, Windows 7 home premium os. Now that said I am experiencing stutter sometimes while i'm playing. My fps go from 60 which is where it should be to 10 or less. I,m not sure if this is the game card or a lousy connection to the game server as we do get discoed sometimes. The computer is a year and a half old and don't remember experiencing this before that much. Any advice would be greatly appreciated. I'm not against getting a new card and probably need new power supply.
 

A:GeForce GTS 240 issue or gaming server issue?

What resolution are you playing at? What is your budget for your upgrade?

Its your gpu more than likely
 

Read other 8 answers
RELEVANCY SCORE 41.2

I have AVG 9 (not free), upgraded from 8.5 a few weeks ago. On Dec. 6 it stopped working - even though my license doesn't expire until Dec. 6, 2010, the license is now shown as expired. Reactivating it doesn't help, copying and pasting from the email I received does nothing.

I uninstalled and reinstalled the program, the license is still showing as expired.

I've gotten no response from AVG at all. Can anyone suggest the next step?
 

A:AVG 9 license problem - invalid license

Click on this site it may be of some help http://www.avgvirusfree.co.uk/avg_support.htm

Also this one http://www.avg-antivirus.com.au/avg_technical_support.htm
 

Read other 1 answers
RELEVANCY SCORE 40.8

My product ID listed for Microsoft Office Pro 2016 is not the same as my license number.

Microsoft automatically enabled/activated Office 2016 and I was not asked to enter my license number. I think the wrong license number was added by mistake. How can I fix this? 

Read other answers
RELEVANCY SCORE 39.6

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-PPKRR-8J7T4-TJHTH
Windows Product Key Hash: 2Xg0gGJgLddefMxQtBCLuEuvT3c=
Windows Product ID: 00346-OEM-8992752-50008
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.002
ID: {33345A0B-6018-40FA-982B-D9A396DFB0D1}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Basic
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237... Read more

A:My Genuine activation issue although I have a genuine license

Interesting.
The error message
Notification Reason: 0xC004F063.
...is a pretty specific one, and almost always means that the machine has been reinstalled using media other than the manufacturer's Recovery media, while still using the manufacturer's OEM_SLP Key instead of the COA Key.

For what version and edition of Windows is the machine licensed - according to the COA sticker on the case (or inside the battery compartment)

Read other 3 answers
RELEVANCY SCORE 38

Hi,
This is a very quick and probably easy question.
I am offering regular KMS client servers, so the customer do not need to do any licensing as it will just happen out of the box.
BUT, we also want to offer a Bring Your Own license option, so the end customer can insert their own key.
So,I understand how to change the keys on our Windows Servers, and I wonder whether this builds will accept any OEM key as a replacement for the default KMS client one or not?

Many thanks.

Read other answers
RELEVANCY SCORE 38

Morning everyone,

I just inherited this machine at work but it has a few startup issues that I need your help on. Upon initial startup (before completely loading the desktop) an error popup saying "Your SQL Server insdtallation is either corrupt or has been tampered with (could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this problem."

I've never done this before, could someone help with a step-by-step? I would really appreciate the help

thanks!

A:SQL Server Issue

You might have a look here.About a third of the way down the page is a "possible solution" by an "andydc3".It will start with: "I had the same problem, and I didn't have the duplicate/empty folders that the previous reply mentioned. Here's how I solved it:I went to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033 and found that there resided a good...."Hope this helps,

Read other 3 answers