Over 1 million tech questions and answers.

BSOD Error C0000135; No reboot after Command Prompt to get DMP files

Q: BSOD Error C0000135; No reboot after Command Prompt to get DMP files

Hi everyone,


After closing our Asus laptop 2 nights ago (but not shutting it down), BSOD appeared with the following message:
STOP: C0000135 The program cannot start because %hs is missing from your computer. Trying reinstalling the program.
I've tried many different recovery/repair attempts after looking through the forum for answers, but nothing seems to have worked. My last attempt was to retrieve the DMP files, but the computer won't reboot to accept the command (currently, default setting of "No DMP" is selected, unfortunately).

Here is the process when I start up the laptop:
- (F8 accesses the safe boot menu, otherwise, the following process is what usually occurs when I start up the laptop)
- "Starting Windows" message with icon
- BSOD with error message
- ASUS logo page
- Windows Error Recovery message (asks to Launch Startup Repair Tool or Launch Normally)
- "Windows is loading files page"
- "Windows Corp" page
- Startup Repair checks for problems and fails; sends info to Microsoft Corp about problem
- Startup Repair main window offers option of "View diagnostic and repair details" or "View advanced options for system recovery and support", or Shutdown, Finish, and Cancel
- I click on Advanced options and I input keyboard language and admin password, then its takes me to System Recovery Options, which includes Startup Repair Tool, System Restore, System Image Recovery, Windows Memory Diagnostics, and Command Prompt
-

Any suggestions for a fix/recovery/repair would be greatly appreciated. See below for details of my attempts thus far.

GOAL:
I would like to learn what our laptop's problem is and how to fix it. But, as a last ditch effort, I would like to at least recover our files before reinstalling Win 7 (it came pre-installed, but I have my laptop's Win 7 product key).



---------------------------------------------------------------------
#1 FAILED REPAIR ATTEMPT: Remove Periphery Devices
I removed all periphery devices from my laptop (e.g., mouse, usb drives, CD/DVDs, printer, etc.). After removing all devices, I restarted my laptop with no change to BSOD.

#2 FAILED REPAIR ATTEMPT: System Restore to Previous Point
When I tried to restore the OS to a previous point, the restore failed and deleted that restore point. I have tried this 3 times, and each time it has failed and deleted the restore point. I now have about 5 restore points left, but I don't want to continue trying to restore the computer (and fail) and then be left with zero restore points.

The last restore attempt resulted in the following notice "System failed to restore the file (C:\ProgramData\Microsoft\Windows\StartMenu\Programs\Microsoft Silverlight) from the restore point. The restore point was damaged or was deleted during the restore."

Each time I've tried to restore it, I believe I received a different reason for the system restore fail, but I didn't record the first 2 comments.

Attachment 290797

#3 FAILED REPAIR ATTEMPT: Startup Repair
When I attempted to use Windows Startup Repair Tool, it stated "Startup Repair cannot repair this computer automatically," and provided the details below. When I looked at the Diagnostic and Repair Details Box, all tests had a result of "completed successfully" and noted an error code of "0x0".

Problem Signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200682
Problem Signature 05: AutoFailover
Problem Signature 06: 10
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Diagnostic & Repair Details {Basics}:
Startup Repair diagnosis and repair log
------------------------------
Last successful boot time: 10/12/2013 1:46:03 PM (GMT)
Number of repair attempts: 10

Session Details
------------------------------
System Disk = \Device/Harddisk0
Windows directory = C:\Windows
AutoChk Run = 0
Number of Root Causes = 1

Root cause found
------------------------------
Startup Repair has tried several times but still cannot determine the cause of the problem.

#4 FAILED REPAIR ATTEMPT: Safe Mode (& Clean Boot)
When I tried to restart the computer in safe mode, the computer stopping loading programs at "Loaded: \Windows\system32\DRIVERS\CLASSPNP.SYS

Then I was sent back to the Windows Error Recover (WER) Page which asks you to Launch Startup Repair (which fails) or to Start Windows Normally (which also fails and sends me back to the WER page).

#5 FAILED REPAIR ATTEMPT: Memory Diagnostics Tool
When Windows ran a memory test, no issues were found during the 2 phase test process. However, I was not actually able to see the results log because the results are displayed when you reboot and get to the Windows user login page (per the Diagnostic Tool instructions) and I cannot get to the login page since the BSOD appears and sends me to WER page.

#6 FAILED REPAIR ATTEMPT: LKGC (Last Known Good Configuration)
I used the F8 key when starting up my computer to get to the advanced boot options page and Safe Mode page and selected the Last Known Good Configuration option and hit enter. Upon restarting, the blue screen appeared as it does after every other attempt with the same error message.

#7 FAILED REPAIR ATTEMPT: Image Backup
I do not have a system image so this option is not available to me. (You live and you learn. I'll learn to do this next time.)

#8 FAILED REPAIR ATTEMPT: System File Check Scan
After opening the black command prompt box from the System Recovery Options page (opens after Startup Repair fails), I entered the command prompt "sfc /scannow" and got the following message: "Beginning system scan. This process will take some time. There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."

So, I restarted the computer, which showed a blue screen error message upon boot up, then it went to the Windows Error Recovery page to ask if I wanted to "Launch Startup Repair" or "Start Windows Normally". I went to the Startup Repair screen, as I do in all my above attempts, and since no problem could be found by Microsoft, I was then sent to the Recovery Tools page. I clicked on Command Prompt, and again entered "sfc /scannow" and got the SAME message as befoew: "Beginning system scan. This process will take some time. There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."

#9 REPAIR ATTEMPT: Disk Check
Upon attempting to do a scan disk check (using Command Prompt and typing chkdsk /f, ENTER, then typing chkdsk /r), the computer responded to both commands with "Windows cannot run disk checking on this volume because it is write protected".

Could someone kindly interpret the disk check information for me?

Attachment 290798
Attachment 290799

#10 FAILED REPAIR ATTEMPT: Mini Dump File
I followed the forum's guide to manually configure Windows to create a mini dump file, but after restarting (per the instructions) the changes were not applied because the computer will not reboot.

Attachment 290805



We have never had any issues with our computer and at the moment I am out of ideas, but happy to try new ones! Any suggestions?

RELEVANCY SCORE 200
Preferred Solution: BSOD Error C0000135; No reboot after Command Prompt to get DMP files

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Error C0000135; No reboot after Command Prompt to get DMP files

Problem Signature 06: 10
Problem Signature 07: BadPatch

Just a badpatch.

In recovery environment ->command prompt:

Code:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
Post results

Read other 9 answers
RELEVANCY SCORE 71.2

Hello everyone

Recently a problem has arisen with my system.

Previously I have been doing work that requires me to unplug my network connection and I need to check my IP address each time I plug it in again. I guess it's not set for static IP.
Anyways to do this I usually go into Command Prompt and type 'ipconfig'

Now however I just get "'ipconfig' is not recognized as an internal or external command, operable program or batch file".

The directory is the same as its always been, I can change it but it doesn't seem to matter what it is.

I've checked many other posts and is there something possibly wrong with my PATH variable? I used the command 'echo %PATH%' and it works, the list it gives is very garbled however.

I'm not sure what might have made this problem arise, but I would greatly appreciate any help.

Thanks!
 

A:Solved: Command Prompt Error - 'command' is not recognized...

Read other 15 answers
RELEVANCY SCORE 68.4

Hello there, as long as I know it is possible to open command prompt at the directory you're at using "Open command window here" option but is that also possible to do with only one dos .exe or .bat. I know that they already open with cmd but
lets say I have a custom console gui like far manager, what I want to do is opening that .exe there without using my command prompt with far manager and open a new command prompt for that specific .exe?

Read other answers
RELEVANCY SCORE 68.4

Hello there, as long as I know it is possible to open command prompt at the directory you're at using "Open command window here" option but is that also possible to do with only one dos .exe or .bat. I know that they already open with cmd but
lets say I have a custom console gui like far manager, what I want to do is opening that .exe there without using my command prompt with far manager and open a new command prompt for that specific .exe?

Read other answers
RELEVANCY SCORE 68

I have a utility I run on some customers' machines that requires being run from safe mode. I already have the utility automated via batch, and would like to just run one SFX app and move on to the next machine, knowing that this app will reboot the machine into safe mode w/ command prompt, run my utility, and reboot the machine back into normal mode (the standard shutdown -r -t 01 is easy enough, but there are no modal options!). Also, if this can be done, how would I then make sure that the current user logs in automatically, rather than have safe mode stop at the log-in screen?

The utility in question is a simple "Common Software Package" which includes some software such as Reader and Flash. Some of the software included cannot be installed while an antivirus is running (at least any that have tamper-protection) due to the registry editing involved, but are completely positive in nature (one such software package simply checks the current registry vs. a backup it takes on each shutdown to look for any discrepancies, adjusted for installed software, of course). The packages do not require Windows Installer service to be running, so I have found SM w/ CP to be the best option.

Any help with this would be appreciated.

Read other answers
RELEVANCY SCORE 68

This happened after a power outage. When I try to run them, it seems like explorer restarts because the taskbar disappears for a couple of seconds and then comes back on. Also all explorer windows are closed.

A:Can't run some exe files like regedit and command prompt

Power outages and such...can create corrupt/damaged system files.

IMO, the wise thing to do after such..is run chkdsks /r and then possibly defrag your system partition. I settle for running chkdsk /r.

Louis

Read other 3 answers
RELEVANCY SCORE 68

Someone turned my user file into a bak file now I can not access my computer other than with windows reboot flash drive. I only have only discovered how to open regedit and command prompt from it. Also since my user profile was turned into a bak file it disappeared but I know it has not been deleted. Please help me find the bak file so that I can change it back. Also the bootable flash drive loads as drive x instead of c
 

Read other answers
RELEVANCY SCORE 68

I have a .exe file which I have to run in a command prompt window, which converts file types for me. I have a directory of about 1400 files that I need to convert. At the moment, I have to run cmd, go to the converter.exe directory. Type converter.exe -c (to convert) file1.smm file1.wav.
I have to type this about 1400 times over and over.
Does anyone know of any tricks which can input this line over and over, but change the file names to match the names of the files in the directory?

sorry if this don't make sense.

A:Command prompt help with multiple files.

A great deal depends on the command line options of the conversion program. It may have options that help with this issue. I would check this first.

Read other 1 answers
RELEVANCY SCORE 68

Before I had this problem, I was trying to fix an issue where .exe files would not open at all. The person who answered my question gave a link to a Kioskea tutorial, which I followed and while it did fix the issue, it brought up a new one: All .exe files open with Command Prompt, so I have to type the filename itself before it will open. Any help is appreciated.

A:All EXE files open with Command Prompt

Download

http://www.winhelponline.com/fileasso/exe_fix_w7.zip

Extract and launch the registry fix

Good luck

Read other 2 answers
RELEVANCY SCORE 68

System is running Windows XP

The user took it to me (I built it about 2 years ago from a TigerDirect barebone deal)when she lost all Internet connectivity. I had installed AVAST which was still running but she had also installed AVG. Both were resident. I also noticed that she has installed some type of "PC Power Boost" program which I did not recognize.

While I can see all the files using the Windows File Explorer, while in a command prompt window no files are displayed with the DIR command. I can CD all I want to navigate the directories but I cannot see any files. Windows does not show that any files are hidden when I check the attributes.

Malwarebytes located a few files but rebooting after removing them did not fix this issue. When I tried to run the AVG program in safe mode, it started but returned to the start screen after about 2 seconds with nothing found or removed.

I suspect that there is a BOOT virus or rootkit installed.

A:No IP and no files in command prompt windows

With the information you have provided I believe you will need help from the malware removal team. Please make sure that you read the information about getting started first.Then start a new thread HERE and include or required logs.Including a link to this thread will be helpful. Good luck and be patient. Help is on the way!

Read other 3 answers
RELEVANCY SCORE 68

http://www.bleepingcomputer.com/forums/topic428319.html/page__pid__2478329#entry2478329

Above is my original post. Here is the log file that I just captured from the infected system. I ran the Kaspersky rescue disk and it indicated that AVG was infected. During the initial setup of the computer, Avast had been installed. The user installed some software a few weeks ago and I think that is the problem. Below is the log file from GMER

GMER 1.0.15.15641 - http://www.gmer.net
Rootkit quick scan 2011-11-18 14:48:27
Windows 5.1.2600 Service Pack 3 Harddisk0\DR0 -> \Device\Ide\IdeDeviceP1T0L0-5 ST3750640AS rev.3.AAE
Running: uv8nu6jz.exe; Driver: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\ugxyafog.sys
---- Devices - GMER 1.0.15 ----

AttachedDevice \Driver\Tcpip \Device\Ip avgtdix.sys (AVG Network connection watcher/AVG Technologies CZ, s.r.o.)
AttachedDevice \Driver\Tcpip \Device\Tcp avgtdix.sys (AVG Network connection watcher/AVG Technologies CZ, s.r.o.)
AttachedDevice \Driver\Tcpip \Device\Udp avgtdix.sys (AVG Network connection watcher/AVG Technologies CZ, s.r.o.)
AttachedDevice \Driver\Tcpip \Device\RawIp avgtdix.sys (AVG Network connection watcher/AVG Technologies CZ, s.r.o.)

---- EOF - GMER 1.0.15 ----

A:No IP and no files in command prompt windows

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 68

ok i have a problem. i need to retrieve all my files from my hard drive on my laptop but the problem is something has happened to the laptop and it wont boot up. i can only get into command prompt. how can i transfer all my files to an external drive using command prompt..


thanks

A:transfer files using command prompt

Hi -

use the XCOPY command. Only copy user profile folders - not \Windows, \Program Files, etc. . .

Assuming drive f: is the external drive -

Command to copy Documents, Favorites, Music, Pictures, etc... folders to drive f: -

Code:

xcopy "%userprofile%" "f:\userfiles" /i /s /y

Regards. . .

jcgriff2

.

Read other 11 answers
RELEVANCY SCORE 67.2

I've got a hard-drive that's giving an imminent failure warning. I could only boot up to the windows login screen...and after I enter my password it goes to a black screen and doesn't get any further.

I had the warnings for months...so already had a headstart on the back-up process.. everything else is backed up except what I had on the Desktop and in the Sticky Notes.

I've got the Windows 7 installation disk in there now....and booted into the command prompt at X:

my desktop is at

c:/Users/mydumbusername/Desktop/

could I have a command to run from the X: prompt to backup everything only from the desktop ? I guess i'll have to stick in a USB or something as well ?

So yea, just whats on the desktop...but i've also got some passwords in the Sticky Notes as well. (desktop) not sure if backing up the desktop , gets what's in the sticky notes as well ? If I could just 'read' whatevers in the Sticky Notes that'll be adequate and I wouldn't need to back that up....just the desktop stuff.

any help would be awesome.

thanks

A:Copying desktop files from command prompt ?

Hi, and welcome to TSF.

First, lets try to get to the desktop through safe mode, By startup, press F8 a couple of times, than sellect safemode with networking, or just safe mode.

If this works, I think you have some sort of virus on your computer which is keeping you from accessing your desktop.

Read other 6 answers
RELEVANCY SCORE 67.2

When I loaded a game's .zip folder from a borrowed CD, and then extracted the contents, some files failed to decompress. I found a Techzonez forum post in which the problem was solved by using command prompt (cmd.exe); "type, expand filename.XX_ filename.XXX". It sounded simple enough but, being inexperienced, I looked for a tutorial and wound up at Bleeping Computer. Although I tried to follow the screenshot examples, I kept gettingvarious admonishments:'C:\' is not recognized as an internal or external command,.... Syntax is incorrect for the command or something like thatThe system cannot find the designated pathMy target folder is C:\ProgramFiles\WindowsNT\pinball, but instead of the cmd opening to C:\WINDOWS as in the example, mine opened to C:\Documents and Settings\Admin>....no matter how I tried typing C:\, C:\>cd,or variations thereof, I couldn't change the directory (C:\ is not....). I only got the other warnings when Imistakenly typed in all four or five 'expand' commands before hitting 'Enter'.Then, looking over the tutorial again, I noticed the major difference between MS-DOS's and XP's versions of cmd.exe.I opened the newer Help file and read about the Compact/u command; I failed to make real sense of it withoutsomething to practice on, but I wonder if that's the way I should go? Neither list of commands included anything withthe word 'expand'.Th... Read more

A:Command-prompt newbie wants to expand .XX_ files

Why not just cd to c:\program files\windows nt\ and extract the files there?

Read other 2 answers
RELEVANCY SCORE 67.2

Hello, I really need help. (and by the way, I'm new here, so I'm sorry if I do anything wrong)
 
My command prompt and batch files have stopped working, I'm a programmer, and testing some new things recently (requiring .bat files), so I really need help!
 
I tried to find the solution to the problem myself in several ways: I've been testing the command prompt in various different ways, but only found one way of making it work, and that was in a very impractical way (Windows 10 advanced restart -> command prompt). This led me to think that it may be a virus, or some other program, executing at startup, but so far, I have not been able to find which it could be.
 
In terms as precise as I can give, the problem is the following:
When activated, the window executing the command closes instantly, before running any command, or giving me a chance to enter input.
This problem does not occur however, when the command prompt is executed without any other programs.
I have tried going through background processes, but I haven't located one yet in which malignant code may be in-bedded.
If you need any extra information, please ask, I probably have more that I have forgotten/don't know the importance of.
 
This problem began to occur when I had Windows 7 btw - if that is of any use.

A:Command Prompt and .bat files close instantly

This problem began to occur when I had Windows 7 btw - if that is of any use.

 
That is of use because it tells us it has nothing to do with Windows 10. When you click start and type "cmd" if you right click and select "Run as Administrator" does that make a difference?
 
If you think your computer is infected there are a number of programs you can use to try to detect it, but I do like MalwareBytes. IMO it works well and effectively removes infections other programs don't detect.
 
You might also want to check startup programs against the Startup List.

Read other 6 answers
RELEVANCY SCORE 67.2

Hello everybody. I have what I thought should be a relatively straightforward question: What do I type in the command prompt in Win7 to extract all the files from inside an .exe? I remember doing it once a long while back, but I forgot how and Google is being especially unhelpful.

One result instructed me to navigate to the file's location and type:

filename.exe /A /P C:\destinationfolder

but that didn't work. I assumed it was for an older Windows version. Google got its hit from a comment saying it didn't work on Win7... Can anybody help?

A:Extracting files from an executable with the command prompt

Most archive-related programs (i.e. 7zip, WinRAR, etc.) have a command-line capability. You can also use unzip.exe.

There is also the Microsoft self-extractor, see this page for description.

Read other 5 answers
RELEVANCY SCORE 67.2

Running Windows Hyper-V server [because licenses are expensive]
I have Windows 7
I just want to run an application (an exe) on this server.
How do I move it over?

robocopy ????? c:/temp ?

A:How do I command prompt style share my files with RDP?

Command Prompt is used primarily to affect the local machine only. You can only copy to local directories (A: C: D: ...etc)

If you wish to copy to a network share then you will first need to map the network share to a letter. To do this enter the following command (Share must have everyone permission applied):


Code:
net use H: \\Server\share
The characters in red can be changed for your wish with the letter representing the drive letter you wish to use and the UNC path being the location of the share that you wish to mount.

You must include any spaces listed above

Once mapped, you should be able to copy to the location that you wish

Hope This Helps,
Josh!

Read other 3 answers
RELEVANCY SCORE 67.2

I am trying to run a batch file to copy the Outlook.pst file to One Drive folder when the system starts, so that it is backed up all the time.  For ages I haven't use DOS command.

I tried in the command prompt the following when the file of the same name was not already at the destination folder.

C:\Users\%username%>copy "C:\Users\%username%\Documents\Outlook Files\Outlook.pst" C:\Users\%username%\OneDrive\Outlook
Sometimes it copied straight away and exited

Sometimes it copied but hung there and I couldn't see any prompt waiting for response.  When I hit Ctrl-C, it exited and the file already copied would be deleted.
I have also tried the following command but didn't make any difference.
C:\Users\%username%>copy "C:\Users\%username%\Documents\Outlook Files\Outlook.pst" C:\Users\%username%\OneDrive\Outlook /Y

Read other answers
RELEVANCY SCORE 66.4

Hi
I wonder if anyone can give me an idea of what happened. I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.

Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?

Would appreciate any help!

Thanks in advance!
 

A:Command prompt suddently appeared copying files

Contact your IT department as soon as possible.
 

Read other 2 answers
RELEVANCY SCORE 66.4

The instructions are below. I get as far as the third line, which reads:
Type cd "C:\Program Files\Common Files\Adobe\Acrobat\ActiveX" and press Enter.
It responds, "path not found."
I paste in this entire line, letter for letter.
cd "C:\Program Files\Common Files\Adobe\Acrobat\ActiveX"
Is that not right?
Thank you.
Ed




Acrobat registers a numerous files with the operating system during the installation. These files must be removed in order to successfully remove the application. Registered files can be removed from the operating system with the shell is not running.

Press Control-Alt-Delete and choose Task Manager.


On the Processes tab, select explorer.exe and choose End Process (items on your desktop disappear).

Important: The Task Manager should remain open during this process


Click Yes in the warning box.

Choose File > New Task.

Under Open, type cmd and click OK.

Minimize the Task Manager.

Type cd "C:\Program Files\Common Files\Adobe\Acrobat\ActiveX" and press Enter.

Type del AcroIEHelper.dll and press Enter.

Type del AcroPDF.dll and press Enter.

Type del pdfshell.dll and press Enter.

Type exit and press Enter.

Maximize the Task Manager.

In Task Manager, choose File > New Task.


Type explorer.exe and click OK. (Your desktop reappears.)

Exit the Task Manage

A:Removing registered Acrobat 8.0 files using the command prompt.

Welcome to Seven Forums edwardshaw. Perhaps the instructions were for 32 bit OS? Try the same command for Program Files (x86)

Type cd "C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX" and press Enter.

I don't use adobe, so unsure if the files exist in both Common Files folders in Program Files , and Program Files (x86)

A Guy

Read other 2 answers
RELEVANCY SCORE 66.4

So, the other day I was on my desktop computer and the command prompt came up twice very quickly. Then a second later it came up again and inside the command prompt I got a message saying files copying 0 and then files copied 1. Then one of my desktop icons dissapeared. Then when i got on my laptop, a day later, the command prompt popped up two times quickly on there too. I don't know what to do. I think I might be infected with a rootkit help.

A:Command prompt saying files copied and icons dissapearing..

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download and run this DDS Scanning Tool. Nothing will be deleted. It will just give me some additional information about your system.Download DDS by sUBs from one of the following links, if you no longer have it available. Save it to your desktop.1: DDS.scr (Not recommended if you use Chrome to download this .scr file. Use the other options.)2: DDS.pif3: DDS.COMDouble click on the DDS icon, allow it to run.A small box will open, with an explanation about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Please note: You may have to disable any script protection running if the scan fails to run.Please just paste the contents of the DDS.txt log in your next post. DO NOT attach the log.===Third party programs if not up to date can be the cause of infiltration an infection.Please run this security check for my review.Download Security Check by screen317 from here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.A Notepad document should open automatically called checkup.txt; please post the contents of that document.===Search and delete the AdWare, PUP (Potentially Unwanted Program) installed on your computer.Pl... Read more

Read other 8 answers
RELEVANCY SCORE 66.4

This is the situation. I'm interested in programming and I have a "problem" I'd like to solve programically. I have two computers, one I use to work on and other to print and store files. Therefore, I have to transfer files I work on over to the printing/storage PC to be able to either print or store. I want to be able to: Insert my usb drive into the printing/storage PC and automatically the computer, or command prompt, will start copying the files off the usb drive to a certain location. Can I create a command prompt program that acts in the following sequence:

The command prompt program is run.
It awaits usb drive input.
If an usb drive is inserted, cmd copies all of it's files to C:\files

How is this possible?
 

A:Making command prompt automatically copy files

If the two computers are on the same network I would just use software that keeps them in sync over the network.

Even with the USB stick you could use a program that keeps the USB synced on each computer. I had my Mom setup a few years ago to use Microsofts SyncToy to synchronize a USB stick with her home computer and her computer at work.
 

Read other 2 answers
RELEVANCY SCORE 65.6

I'm on Windows XP Professional, Dual-Booting RedHat Linux 9 (Just upgraded from 8)
This is very odd. I recently found a folder in my recycling bin called Jgl_Rt ( I think it was after I installed the new Freelancer demo from PCGAMER. . . or perhaps when I transfered a zip file with a bunch of jpg's I had scanned from my grandma's house) so I was curious, and dragged it onto my desktop to take a look inside. I couldn't open the folder, because it said access denied, and I couldn't delete it. I tried to change the read-only attribute under properties and it said access denied. I tried to scan the file with 3 different anti-virus software. Avast! Home edition, Norton 2003, and PC-Cillin 2002. None of them were able to access the file, therefore, they couldn't scan it. Now, almost all the jpg's and zips on my computer, as well as many random files around my computer are locked in place. They now have the same symptoms of that folder. A few of them I was able to fix when scanning and choosing repair, which I could then delete. . . but that only applied to a few files, and not all of them. No virus was detected yet on my computer. What the hell is going on!? I tried checkdisk, and defragmenting my drive (Why did I think defragmenting would help, I have no idea.).
Eventually I got rid of jgl_rt by doing a system restore point, but that made a few other folders do the same thing. . . I got a few of them to delete in command prompt under safe mode wi... Read more

Read other answers
RELEVANCY SCORE 65.6

hi,

By mistake i ran DEL C\WINDOWS\SYSTEM32\*.dll in safe mode with command prompt so as to remove one of .dll files which seemed to be a Mal ware which i am still not able to delete. But because of this i have lost all files with extention .dll got deleted from system32 folder . After this i have to repair the windows using windows C.D as my Windows went corrupt .

Now that i have Repaired windows i am still getting lots of error regarding various file name with extension .dll

I was wondering If anyone can tell me if there is any way to recover the lost files. or can suggest any alternative way to get this fixed .

plzz Help.

my logfile of HijackThis is patsed below

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:19:48 PM, on 3/29/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Kerio\Personal Firewall 4\kpf4ss.exe
C:\Program Files\Panda Security\Panda Antivirus 2008\PsCtrls.exe
C:\Program Files\Common Files\Panda Software\PavShld\pavprsrv.exe
C:\Program Files\Kerio\Personal Firewall 4\kpf4gui.exe
C:\Program Files\Panda Security\Panda Antivirus 2008\PsImSvc.exe
C:\WINDOWS\system32\RunDll32.exe
C:\Program Files\Panda Security\Panda Antivirus ... Read more

A:how to recover deleted files in safe mode with command prompt

plz help.....................................
 

Read other 1 answers
RELEVANCY SCORE 65.6

Hello i was wondering if someone could help me.I am unable to run anything from cmd(like say ipconfig or sfc /scannow)Yesterday My computer kept'd freezing at start up on my destop.Also i did a scan with Malwarebytes and it found 4 Trogans called MEMSWEEP2 it quarintined them.So im wondering if a have corrupt system files or remnants of a virus thanks richymun4.

A:Command Prompt Error

You need to get help with malware removal. We have experts here at TSF that can help you.

To get Expert Help with malware removal:

I recommend that you read this article… ( Simply, click on the links to be re-directed.)

"Having problems with spyware and pop-ups? First steps;

IMPORTANT - Read This Before Posting For Malware Removal Help

Please follow the instructions very carefully; then, post all the requested logs and information; as instructed, in the HiJackThis Log Help Forum.

http://www.techsupportforum.com/secu...this-log-help/

Please ensure that you create a new thread in the HiJackThis Log Help Forum; not back here in this one.

IMPORTANT - Read This Before Posting For Malware Removal Help

When carrying out The 5 Steps,

If you cannot complete any of them for whatever reason, just continue on with the next one until they are all completed.

However, it is extremely important to make mention of the fact that you could not complete any of the steps in your post to HiJackThis Log Help Forum.

http://www.techsupportforum.com/secu...this-log-help/

Where an Analyst will assist you with other workarounds.

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

Read other 1 answers
RELEVANCY SCORE 65.6

Check attachment for screenshot of the problem. What's with the strange error message? Where's my normal error message?

That's on Win 7 Ultimate SP1.

A:Help with error in my command prompt

Hello ddadda, and welcome to Seven Forums.

You might see if doing a system restore, at boot if needed, using a restore point dated before you had this issue may be able to fix it for you.

Hope this helps,
Shawn

Read other 8 answers
RELEVANCY SCORE 65.6

It used to work, but for some reason now when I click on Start, Programs, Accessories, Command Prompt (or Start, Run, cmd) I get the following error message window:

C:\WINNT\system32\cmd.exe
Only part of a ReadProcessMemory or WriteProcessMemory request was completed.

I have searched every support site that I can think of and get zero hits that are similar.

I can't get any help from Microsoft because the OS is OEM version and the computer manufacturer doesn't have a clue what the problem might be.

HELP!!!!

A:Command Prompt (cmd.exe) error

Got run and type:
command
then click ok.
Command is a command file. Sounds like you may have something attached to the exefile open procedure.

If you are comfortable with your registry editing skills. Look here first.

HKEY_CLASSES_ROOT\exefile\shell\open\command

The default value when you double click the
default key is:
"%1" %*
(this includes the quotes)
If anything else is behind this you may have a virus.

If this is windows 2000 make sure that you don't have the lovsan worm or other variants that use the RPC vulnerability.

Read other 8 answers
RELEVANCY SCORE 65.6

Hi!

I run a Windows XP and whenever I try to run my command prompt window I get an error saying that the system file is not suitable for running MS-DOS and Microsoft Windows apllications. How do I fix this?

Thanks.
 

A:Command Prompt Error

Read other 7 answers
RELEVANCY SCORE 65.6

An error appears when I open command prompt (cmd.exe). I did SFC /ScanNow and now it doesn't work. The error is says
The application was unable to start correctly (0xc0000018). Click OK to close the application.
Can anyone help me with this error?

Read other answers
RELEVANCY SCORE 65.6

I am trying to install updates (just installed Vista 32 bit) and am getting error 80070057. When I type in the command prompts as directed I get a reply line stating that Proxycfg.exe' (note apostrophe) is not a recognized etc. I have been exceedingly careful that I did not type in the apostrophe by mistake. What do I do now?

A:Command Prompt Error

Originally Posted by woodhick803


I am trying to install updates (just installed Vista 32 bit) and am getting error 80070057. When I type in the command prompts as directed I get a reply line stating that Proxycfg.exe' (note apostrophe) is not a recognized etc. I have been exceedingly careful that I did not type in the apostrophe by mistake. What do I do now?



Proxycfg command don't exist in Vista instead you have to use netsh wihttp reset proxy command.

1.Try reset WU components in aggressive mode How do I reset Windows Update components?
2.If you have any Acronis product then uninstall them
3.Uninstall all security software

Read other 2 answers
RELEVANCY SCORE 65.6

Every time I connect my system to laptop laptop charger command prompt pops-up with this message "Windows can not find C:\Users\Admin AppData\Roaming\Microsoft\Windows\dugcijj\tagdi crj.exe" with a OK button or close the program but it pop-up
again.

Read other answers
RELEVANCY SCORE 65.2

Hi,1st post, I hope it's not too early to ask for help.Here's my issue: I have a laptop running Windows 7 Home Premium 64-bit. There is no optical drive. A couple of days ago I was using a downloaded keygen program for Adobe Acrobat. As soon as I unzipped it, AVG gave me a warning. I stopped using that app and got rid of it. I then found another keygen and as soon as I clicked on the .exe I got the BSOD which indicated a problem with iaStor.sys. I know that was stupid but I needed to use Acrobat and I had successfully downloaded keygens for it in the past. From then on I got BSOD about 10 seconds after logging in to Windows, safe modes included.I researched the issue on a clean PC and found lots of info here. I made a bootable USB with the Windows 7 Recovery CD, which allows me to do a System Startup Repair and to enter Command Prompt. System Repair finds no errors. From others' experiences at the link above, I did the following at Command Prompt:Bootrec.exe /FixMbr Bootrec.exe /FixBootThat must have been a mistake because now I can't even get to the windows login screen. I get BSOD when the Windows colored dots are spiraling around the black screen. Since then, I've been trying to execute TDSSkiller.exe from Command Prompt because that solved the issue for many others at the link above. When I type "start tdsskiller.exe" from Command Prompt, I get message that "The subsystem needed to support the image type is not present."... Read more

A:BSOD by iaStor.sys, Command Prompt is only option

With the information you have provided I believe you will need help from the malware removal team. I would like you to start a new thread and post a DDS log HERE and include a link to this thread. Please make sure that you read the information about getting started before you start your thread.It would be helpful if you post a note here once you have completed the steps in the guide and have started your topic in malware removal. Good luck and be patient. Help is on the way!

Read other 1 answers
RELEVANCY SCORE 64.8

Hi guys,

I have a folder with 995 files in it and I'd like to give someone a text file with a list of all these files in it. Is there a way that I can get the command line to send the names of these files to a text file?

I tried navigating to the directory and using the DIR command and, sure enough it gives me a list but I am unable to copy and paste it to a textfile myself for some reason.

Any help would be appreciated.

A:Command Line Prompt - How To Export List of Files to Text File

type this:

DIR > dir.txt

This should save the output of DIR into the text file dir.txt

Read other 5 answers
RELEVANCY SCORE 64.8

recently,i uninstalled all Malwarebytes software and from then I was unable to open .exe files,not even command prompt and regedit and getting error as "no such interface supported".i tried all the methods like changing registry values(I
can open cmd in safemode options and through that I can access regedit and import Exe.reg but changes regains while restart) and sfc /scannow but nothing works me.so please get me out of this,thanks in advance

Read other answers
RELEVANCY SCORE 64.8

Can someone fix this for me i dont really knw what this is saying when i put that command in. I wanted to do the command where it turns of the spikes while gaming and for some reason this is the error its showing. I think the statement C:\USERS\KOS>C:\Windows\System32\cmd.exe /k netsh wlan set autoconfig enabled=ye
s interface=Wireless Network Connection

juss needs some corrections juss dont knw what. Plz help thnx

Microsoft(R) Windows DOS
(C)Copyright Microsoft Corp 1990-2001.

C:\USERS\KOS>C:\Windows\System32\cmd.exe /k netsh wlan set autoconfig enabled=ye
s interface=Wireless Network Connection
One or more parameters for the command are not correct or missing.

Usage: set autoconfig [enabled=]yes|no [interface=]<string>

Parameters:

Tag Value
enabled - Set auto configuration logic to enabled or disabled.
interface - Name of the interface for which the setting has to be
changed.

Remarks:

Enable or disable the auto configuration logic on an interface. If it is,
disabled then Windows will not connect to any wireless network
automatically from the specified interface.

Both parameters are required.

Examples:

set autoconfig enabled=yes interface="Wireless Network Connection"
C:\Users\kos>

Read other answers
RELEVANCY SCORE 64.8

My computer at the loggin screen has an admin account witha strong pass and my account. Ive tried command prompt to try and change the admin password and even tried to delete it but all that shows up is "SYSTEM ERROR 5 HAS OCCURRED ACCESS DENIED". I also have another account on my computer mcx1 that i dont know about and cant even access. Please any help would be appreciated

A:Command Prompt System error 5

(Win32) Error 5 just means "access denied".

It sounds like you've lost all the administrative account credentials? In other words, you don't know how to log on as an admin? Is that the problem?

Read other 2 answers
RELEVANCY SCORE 64.8

Can someone fix this for me i dont really knw what this is saying when i put that command in. I wanted to do the command where it turns of the spikes while gaming and for some reason this is the error its showing. I think the statement C:\USERS\KOS>C:\Windows\System32\cmd.exe /k netsh wlan set autoconfig enabled=ye
s interface=Wireless Network Connection

juss needs some corrections juss dont knw what. Plz help thnx

Microsoft(R) Windows DOS
(C)Copyright Microsoft Corp 1990-2001.

C:\USERS\KOS>C:\Windows\System32\cmd.exe /k netsh wlan set autoconfig enabled=ye
s interface=Wireless Network Connection
One or more parameters for the command are not correct or missing.

Usage: set autoconfig [enabled=]yes|no [interface=]<string>

Parameters:

Tag Value
enabled - Set auto configuration logic to enabled or disabled.
interface - Name of the interface for which the setting has to be
changed.

Remarks:

Enable or disable the auto configuration logic on an interface. If it is,
disabled then Windows will not connect to any wireless network
automatically from the specified interface.

Both parameters are required.

Examples:

set autoconfig enabled=yes interface="Wireless Network Connection"


C:\Users\kos>

A:syntax error in command prompt?

i didnt know there was a command that worked ive been using Vista anti lag for gaming , can you give me a link to this info so i can have a look please

Read other 6 answers
RELEVANCY SCORE 64.8

Hi,
I'm trying to install a fix for an old program to run on my computer, running XP. I get to almost the end of the instructions and am supposed to activate the fix, which I have already inserted in the program file (Fractal Painter 4). But when I go to command prompt, instead of getting the expected "C:\>" I get "C:\Documents and Settings\Owner" and cannot delete it nor get the correct insert point. When I typed in the command to activate my program fix at the end of "...\Owner" it didn't work. How do I get just "C:\>" ? Thanks for any ideas!

A:[SOLVED] command prompt error --I think

Hi

When you get "C:\Documents and Settings\Owner>"
Type in

Code:
CD\
and enter.
This should take you to C:\> prompt

Read other 10 answers
RELEVANCY SCORE 64.8

Whenever I open up a command prompt for any reason, this is the message I get:
"An Extended Memory Manager is already installed.
XMS Driver Not Installed."
Is there a specific reason this message? I'm not really sure if it has created any problems, but it seems like it has prevented some programs from running. Is this something that will cause problems? Is there something I can do to correct the problem?
 

A:Command Prompt Error Message

Read other 16 answers
RELEVANCY SCORE 64.8

Hello guys,
I have problem with CMD
When I run Windows error reporting window appears and error message appears:
The application was unable to start correctly (0xc0000142). Click OK to close the application

Please reply.

A:Command Prompt Error on Windows 7

Ben050,

Use this

sfc /scannow

Read other 9 answers
RELEVANCY SCORE 64.4

I've been having a lot of BSOD problems while playing games lately and it (the bsod) says it's the dxgkrnl.sys that causes it which I read online it was a driver issue, so I ran the Windows Driver Verifier from command prompt and once my pc started up I got a BSOD and informed me I had faulty drivers, I'm just unsure of what drivers are actually conflicting. If anyone could help it'd be awesome.
The minidump is attached, thanks.

A:BSOD after running driver verifier from command prompt

This is not a Driver Verifier generated memory dump - and it points to the same file as before. It's also the 3rd dump file generated on July 8 - so I must ask..."Where are the rest?"

Please zip up the entire contents of the C:\Windows\Minidump folder and upload that .zip file with your next post.

Also, please let us know where, in the sequence of BSOD's, that you enabled Driver Verifier - and if you've disabled it.

Also, please let us know what instructions that you followed to run it.

Older drivers running when the crash occurred. Please notice that DB3G.sys is from 2005!:

Code:
SI3132.sys Wed Oct 03 14:39:29 2007
SiWinAcc.sys Thu Jun 14 20:02:02 2007
SiRemFil.sys Wed Jun 20 15:42:10 2007
DB3G.sys Mon Nov 07 01:33:11 2005
Dump file:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR-RC1-Desktop\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18005.amd64fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0xfffff800`01c1f000 PsLoadedModuleList = 0xfffff800`01de3dd0
Debug session time: Wed Jul 8 21:06:52... Read more

Read other 4 answers
RELEVANCY SCORE 64.4

Hey everyone,

This is my first post here, but I have found a wealth of info over the past few days from here. Than you for that. However, my problem doesn't end where others say "SOLVED".

The jist of it:
My computer is stuck in a loop. Start windows normally, safe start, neither works. The start gets interrupted by the BSOD and the process starts over. In order for me to get to System Recovery, I have to boot from my USB Flash. I have ran the repair over and over, easily over 20 times, with no result. I would get BSOD from memory issues every second or so repair attempt. I performed the memory test (memtest86) and have found that one of my memory sticks is faulty. Now there is no BSOD from the repair. I am only running on one 4gb 1866 stick now.

So then I started using the command prompt, particularly the chkdsk d:/f and I always get the same result now. I figured that that route was a dead end. I went back to the safe start (from the HDD) to see where it stops loading. I tried renaming as well as deleted the DRIVER is stops at, but with no luck.


I just purchased this to take my files off, but I won't get it till maybe Wednesday or Thursday if I'm lucky.
Newegg.com - New USB 2.0 to IDE SATA S-ATA 2.5 3.5 Hard Drive HD HDD Converter Adapter Cable

Thanks,
Kev

A:Instant BSOD: Can not boot from HDD: Command Prompt not Helping

Hello and welcome Kevvon one way of getting your data offf is one I use for even dead drives

BOOTABLE UBUNTU

Make a bootable Ubuntu disk http://www.ubuntu.com/download

Set the BIOS to boot from theoptical when the machine boots it will show you a screen with TRY or INSTALL> select TRYnot INSTALL

When it is finished - it takes verylittle time you will get a screen like in the pic .

Open the drive you want > Userand dig down until you get to the data / settings you may be able to copy /paste the material you want to an external source or other installed drive doingthis.

I am not sure if it will but I haverecovered tons of data etc using this method both on "dead" or justplain drives that you cannot get data from using Windows.


But first have a look through this
Troubleshooting Steps for Windows 7

Read other 9 answers
RELEVANCY SCORE 64.4

Hello,

After a recent software install I have been seeing a blank black screen after logging into windows vista, and have had to manually start explorer.exe from task manager. I remedied this problem once in the past by following the verifier instructions from jcgriff2 on this thread http://www.techsupportforum.com/microsoft-support/windows-vista-support/360482-computer-crashes-windbg-analysis.html but after a recent software and driver install for an mp3 player, the same problem occured; I would get a black startup screen, would have to manually start explorer.exe, and would lack many of my startup programs like avg virus tray and others. I retried using the verifier method, and repeatedly got BSODs after restarting my computer. Can anyone help me fix this issue? The minidump file is attached at the bottom. Thank you.

Joseph Wang

A:BSOD after running driver verifier from command prompt

Quote:





Originally Posted by joewangtt


Hello,

After a recent software install I have been seeing a blank black screen after logging into windows vista, and have had to manually start explorer.exe from task manager. I remedied this problem once in the past by following the verifier instructions from jcgriff2 on this thread http://www.techsupportforum.com/microsoft-support/windows-vista-support/360482-computer-crashes-windbg-analysis.html but after a recent software and driver install for an mp3 player, the same problem occured; I would get a black startup screen, would have to manually start explorer.exe, and would lack many of my startup programs like avg virus tray and others. I retried using the verifier method, and repeatedly got BSODs after restarting my computer. Can anyone help me fix this issue? The minidump file is attached at the bottom. Thank you.

Joseph Wang




Hi Joseph. . .

Well, the driver verifier did its job and flagged a rogue driver. The verifier will either cause or force a BSOD once a driver is caught. In the instructions from the post you referenced, I mention the fact that one may need to resort to system restore, system repair, etc... to regain control of the system if the verifier is successful. The next step is dealing with the bad driver - removal, update, etc..

Driver verifier post - http://www.techsupportforum.com/2046409-post2.html

The dump file you attached was in fact... Read more

Read other 3 answers
RELEVANCY SCORE 64.4

I typed the following in the command prompt to certificate fingureprint(MD5):-
C:\>keytool -list -alias androiddebugkey -keystore Documents and Settings\srinivas.HOME-0FA0752F2F\.android \ debug.keystore -storepass android -keypass android

but it is showing error:-

keytool error: java.lang.RuntimeException: Usage error, and is not a legal command

Using MD5 I have to get apiKeys for Google Maps.

Any kind help will be appriceated

Read other answers
RELEVANCY SCORE 64.4

Everytime when I start my computer a Command Prompt Screen appears and tells "The system cannot find the file specified."
So I run "msconfig.exe" and "Autostart program viewer (Sysinternals - www.sysinternals.com)" to find recent suspicious startup entry, but found nothing new.
Here's what I found :-
Malwarebytes Anti Malware removes folder :- "C:\Documents and Settings\All Users\Application Data\2308189059"
OS :- Windows XP SP3
Process :- cmd.exe (1292) | Parent :- <Non-existent Process>(1096)
Command line Argument :-
C:\WINDOWS\system32\cmd.exe  /K for  /F %i in ('dir /b /a:h-d /w "C:\Documents and Settings\All Users\Application Data\2308189059\*"') do start /b regsvr32.exe /s /n /i:"" "C:\Documents and Settings\All Users\Application Data\2308189059\%i"
I want to know what is in that Folder - "C:\Documents and Settings\All Users\Application Data\2308189059\" and which process wants to execute its files?

A:Windows StartUp Command Prompt error

Here I've uploaded a Screenshot from Process Explorerhttp://i.imgur.com/cUaq3Ns.jpg?1
 

Read other 2 answers
RELEVANCY SCORE 64.4

The following is a error I found running the sfc /scannow via the command prompt & I cannot find the fix for it. I didn't want to do a complete restore nor a repair simply because I'll loose items I deem valuable, any ideas on this one?

2013-11-05 16:49:53, Info CSI 00000094 [SR] Cannot repair member file [l:24{12}]"explorer.exe" of Microsoft-Windows-explorer, Version = 6.1.7601.17567, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

A:Explorer Error found via command prompt

Did you install some explorer add-ons or hacks?

Read other 9 answers