Over 1 million tech questions and answers.

Computer freezes at 20 min then instantly when rebooted?

Q: Computer freezes at 20 min then instantly when rebooted?

Hello all!

I have just recently encountered a problem with freezing on mp PC. Seems that when I log into windows after about 10-20 min the screen freezes with the image still intact but I cannot do anything except power button reboot, sometimes it will suddenly reboot as well. When the computer reboots it will freeze at the Windows XP loading bar screen. It will also freeze up if I try to do a Safe Mode boot (sometimes freezing at the selection screen). I tried to do a windows repair using the XP disk but it will freeze while it is loading the drivers. I have also tried to use MemTest but while it is going through its test passes it will freeze thier to. I have started to replace components that I thought would be the problem: power supply (430W to 650W, video card (now an NVIDIA 9600 GT 512 PCIe, even the DVD drive (as this first started to happen while running a cd based program. I have gotten to the point to where I do not know what is happening, soon I will be to the point to where I am going to end up upgrading everything in the PC trying figure out what the culprit is.

A couple of weeks ago I did notice that the Windows clock and date had reverted back to the origional MFG's BIOS settings which I had to fix. Could this be the result of a dying BIOS battery? When I ran MemTest it had made it to the 6th pass so I do not think it is a memory issue which leaves the motherboard, CPU, and hard drive left as culprits.

I am at my wits end on this and getting frustrated to the point of KO'ng my PC!!! Can anyone help?

PC Specs:

Windows XP Pro Svc Pak 3
Intel Pentium 4 3gig
ABIT AL8 motherboard
2 gigs ram
160GB HD
NVIDIA GeForce 9600 GT 512 PCIe
On board LAN
ATI All In Wonder Capture Card
2 Sony DVD R/RW
Antec 650W 3 12V Rails power supply

RELEVANCY SCORE 200
Preferred Solution: Computer freezes at 20 min then instantly when rebooted?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Computer freezes at 20 min then instantly when rebooted?

Read other 8 answers
RELEVANCY SCORE 56.8

Hi Evry 1 again, i cant find my other post =/ i want to say about it thath is solved, no more BSOD.
but now i got other problem -.-
When i try to listen to music watch videos of any kind or playng games my PC just stop nothing responds for like 5 minutes, then it come back to normal and if i dont close the videos or games it happens again and again, wat can be this?

A:Pc Freezes Instantly

That generally means you have a program or service conflict. Follow the instructions for How to perform a clean boot to troubleshoot a problem in Windows Vista or Windows 7 to determine what software or service is causing problems.

Read other 8 answers
RELEVANCY SCORE 55.6

I have a Dell Inspiron 1525 laptop, and every time I would start it up, it would freeze right away. After I type my password to log in, there's a black screen. Sometimes the black screen goes away and loads windows but it would freeze right away, and sometimes the black screen stays and the computer is frozen. I tried starting it up in safe mode, but it would just freeze and start up in normal mode. Help, how do I fix this?

A:My Laptop Freezes Instantly After Start-Up

Have you backed up your critical data?
Can you access the BIOS? Does the BIO freeze?
Can you boot with an Ubuntu LIVE CD?
I would error check the drive for starters. Slave it to another computer if you must. Hopefully your motherboard is not failing.

Read other 5 answers
RELEVANCY SCORE 55.2

When certain programs are run, or when i get to a certain point in a game, or sometimes at random times in certain games, my PC will just freeze. All sound stops, the lights on my keyboard stop animating, and nothing is responsive. The only way out of
this is to reboot. After checking the event log all the errors have been the same. After a quick test, an extension of Autodesk Inventor 2017 called mesh enabler crashes the pc when i click on the part inside autodesk. I timed it. From clicking on the part
at 23:37 which froze the pc, until 23:38 where i hard rebooted the pc. The event log gave the time stamp of 23:39, and that was when i was brought to my desktop. 

Source: Kernel-Power, event id :41, task category:(63)
Windows 7 home premium
AMD FX(tm)-8350 eight core @ 4.62Ghz
GTX 1080
16 GB ram

Read other answers
RELEVANCY SCORE 55.2

Hi everyone.

I am using HP ProBook 4520s Core i3 M370 3GB RAM, 320 HD and Windows 7 ultimate 64bit. Just received it from my dad 3 days ago, and decided to tune it my way as i've recently started a programming carrier. I Formatted it, installed ATI graphic driver (as it came originally with its system), JDK, wamp and office 2010 from Microsoft. As i was watching a movie last nigh, all of sudden it went frozen displaying video like a scratched DVD disk (I wondered why!!!) it took minutes, then i decided to have a look at my CPU performance, surprisingly it was 100percent busy. I unplugged the charger and waited for awhile and it then dropped to its normal usage... It kept doing so for several times. I then decided to google but for a dead end. i finally decided to format the machine again, afterwards i re-installed JDK, ATI video driver and wamp, that was all. i went through my testing again (watching a 720p movie) it then happened the same (CPU went 100percent). Uninstalled ATI, the problem persist... I don't know what is happening now. Please help me

A:CPU Usage instantly goes 100 percent an freezes the system

Have to tried opening the task manager to see what process is using all of the resources?

Try booting up in safe mode. Click here to learn how to boot into safe mode.

Read other 3 answers
RELEVANCY SCORE 54.8

Hello,

I have had this problem since day one with windows 10 and its about to force me back to windows 7. Random times when working on my laptop it will just freeze. If there is something playing be it music or youtube it will make a god awful noise through the speakers.

My laptop is an older laptop and dell says it does not support windows 10. I upgraded all my drivers including the bios.

Any other suggestions or is this a live with it or downgrade?

I have not tried a clean install yet. Would prefer not to if possible but it may be a last resort.

A:Laptop freezes and has to be forced shut down and rebooted.

I have this same problem, except my laptop is new.

I've been troubleshooting this on my laptop for maybe the past month, more or less since I've gotten it. For me, at least it's:

NOT an overheating problem.
NOT a CPU overclocking problem.
NOT an SSD problem.
NOT a HDD problem.
NOT a USB problem.
NOT exclusive to Windows 10 (it happened when I had Windows 7 before I upgraded).

There is no consensus as to what causes this freezing/audio stutter/buzzing. Right now I'm testing with a different power supply. I'm actually hoping it's the PSU, because I really don't want to even think it has something to do with the motherboard.

If it ends up being a driver problem (which I am doubtful it is), I wonder how Windows 10 automatic driver downloads will cause issues if driver rollbacks are necessary.

Anyway, we're basically shit out of luck. Don't expect to get any real advice, since there basically is none to be had. To actually address your post, I don't think you need to do a clean install. I've done various clean installs, both of Windows 7 and 10, and I still get this issue, so it's not (I don't think) an OS or driver issue. But maybe it is. No one knows.

Really frustrating.

Read other 11 answers
RELEVANCY SCORE 49.6

I saw another user had this same issue and have learned from that I need to analyze the Event Viewer and then look at the .dmp files to acertain the posible cause of this XP server rebooting a few times a day without warning.

I have attached the .dmp file here (I cannot get windows to read it).

Can anyone analyze it to see what may be the cause?

Thanks so much!
 

A:Computer rebooting. Event Viewer says: The computer has rebooted from a bugcheck

The minidumps are flagging iaStor.sys and tcpip.sys. Is XP fully udated to Service Pack 3 and beyond?
 

Read other 5 answers
RELEVANCY SCORE 49.6

Hello,

My computer has started restarting itself several times a day... I looked in the event log and see a bunch of these errors (listed below)

Can anyone tell me how to look in the memory.dmp file? I cannot seem to get it to upload on this site, it keeps erroring out. (Perhaps a work firewall) ... I can attach it later if that would help ... can anyone help me figure out what is causing this? This computer was previously working fine. I *think* this loosely correlates with when I updated to Microsoft Office 2010, but I'm not 100% sure about that.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x00000008, 0x8e7e4750, 0x00000000, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: .

- System

- Provider

[ Name] Microsoft-Windows-WER-SystemErrorReporting
[ Guid] {ABCE23E7-DE45-4366-8631-84FA6C525952}
[ EventSourceName] BugCheck

- EventID 1001

[ Qualifiers] 16384

Version 0

Level 2

Task 0

Opcode 0

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2011-11-03T14:33:13.000000000Z

EventRecordID 28351

Correlation

- Execution

[ ProcessID] 0
[ ThreadID] 0

Channel System

Computer CMCD088574

Security


- EventData

param1 0x0000007f (0x00000008, 0x8e7e4750, 0x00000000, 0x00000000)
param2 C:\Windows\MEMORY.DMP
param3
 

A:Computer rebooting. Event Viewer says: The computer has rebooted from a bugcheck

How to find and post your Minidump Files:


My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor and don?t Zip each one individually
 

Read other 7 answers
RELEVANCY SCORE 48.8

NOTE: I'm following the steps to post the HiJackThis Log.

While I was having Ad-Aware scan, a message came up, and it seems I have wasted my time saving the picture because I can't even get to my files....Anyways, I'll put what it says in hopes of someone understanding it...I really need this gone...

"This system is shutting down. Please save all work in progress and log off. Any unsaved changes will be lost. This shutdown was initiated by NT AUTHORITY/SYSTEM."

Then it had a time before shutdown and in a box it says:

Message
The system process
'C://WINDOWS\system32\lsass.exe' terminated unexpectedly with status code
-1
This system will now shut down and restart.
-----------
Any help will be fine, I think I managed to stop the scan and delete what was there...not sure because the box was in the way.....

Should I skip this part and move on?

A:Computer Rebooted Itself

Yes do what ever you can and move along.

Read other 1 answers
RELEVANCY SCORE 48.8

Hi folks

Been a while since I posted. So long that I forgot my username and had to re-register! Anyway this is what's happening to my computer: I press the power button, turns on for a split second (lights + fans running) but shuts off right after (no system beep). I searched the forums for this problem and found similar problems, but not exactly the same as this. If I keep pressing the power button it is likely to do the same thing but theres a chance the system will boot as normal. If I hold the power button, the system will repeatedly turn on and off, and eventually (after a random number of tries) the computer will boot up. Once it boots, the computer will run as smooth as ever and won't turn off by itself. I'm 80% sure it's the PSU, however, I'm hesitant to go out and buy a replacement because the current PSU is an Antec TruePower 480W. I presume Antec is a very respectable brand (correct me if I'm wrong) and it is still under their 3yr warranty period). I did not expect this to break down before 2 years time so I just want to make sure it really is the PSU before I buy a replacement. Maybe I should try another brand? I also checked Antec's warranty online and S+H is not covered for warranties so I figured if the PSU is faulty it would be wiser to just buy a ~$50 replacement.

TIA
 

Read other answers
RELEVANCY SCORE 48.8

my computer continually restarts until i give up and unplug it. It starts up fine then after about 20 seconds it just restarts. I had the problem before and found that after disabeling the wireless internet it worked. Now the wireless is enabled and the computer is not on long enough for me to disable it. Is there anything i can do?
 

A:computer instantly restarts

Read other 8 answers
RELEVANCY SCORE 48.8

I have xp prof and when i log on it instantly logs off. I heard there is a program that you can put into the startup list that will do that. I think one of my friends did it while i was afk. I would appreciate any help fixing this. Thank You
 

A:I log onto my computer and instantly logoff

Read other 8 answers
RELEVANCY SCORE 48.8

Is Windows 7 . . .
- x86 (32-bit) or x64 ?
x64
- the original installed OS on the system?
No
- an OEM or full retail version?
Full retail
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)?
Two years just about.
- What is the age of OS installation (have you re-installed the OS?)
Ah...about a month? Between 0 and 2 months, for sure.

A:Computer instantly shut off mid-use.

  
Quote: Originally Posted by Twilit Soul


Is Windows 7 . . .
- x86 (32-bit) or x64 ?
x64
- the original installed OS on the system?
No
- an OEM or full retail version?
Full retail
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)?
Two years just about.
- What is the age of OS installation (have you re-installed the OS?)
Ah...about a month? Between 0 and 2 months, for sure.


These were probably caused by your rfcomm.sys bluetooth driver. Re-install with newest version to test.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\050711-18595-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02a0d000 PsLoadedModuleList = 0xfffff800`02c52e90
Debug session time: Sat May 7 16:31:28.377 2011 (GMT-4)
System Uptime: 0 days 21:03:13.140
Loading Kernel Symbols
................................................................ Read more

Read other 3 answers
RELEVANCY SCORE 48.4

The bugcheck was: 0x00000024 (0x000000b500190645, 0xffffd0002924d358, 0xffffd0002924cb60, 0xfffff8017e2f64cb).

Read other answers
RELEVANCY SCORE 48.4

ok so I am running windows xp. I know microsoft  says they are no longer supporting this operating system, but I have an older desktop that is not supported by win 7 and I dont have the funds to upgrade to a newer model. I have done this so many times over the years but never ran into this many problems.My Main HDD crashed and is not booting only making clicking sounds, so Recently I had to reinstall windows on a new HDD which a friend gave to me since i couldn't crack the ADMIN password I Upgraded that oporating system overlaping the existing one. after the first inital update my son played on the computer (without my knowledge) now I can't get some drivers to work, computer and programs keep crashing, error reports up the yin yang,  this is just a mess. can anyone help me figure out
 
the latest reboot crash says:The computer has rebooted from a bugcheck.  The bugcheck was: 0x1000008e (0xc0000005, 0xbf85fc9e, 0xb390aae4, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini042415-01.dmp.

A:win xp: The computer has rebooted from a bugcheck.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

Read other 1 answers
RELEVANCY SCORE 48.4

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xffff8381f83948f8, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\WINDOWS\Minidump\122917-25218-01.dmp. Report Id: bb314b0f-7415-4836-a184-f42af30f3f21.

Specs:
Motherboard: 760GMA-P34 (FX)
Ram: 8GB DDR3
CPU: AMD FX-8350
CPU Cooler: Cooler Master TX3
GPU: NVIDIA GeForce 1050 Ti
PSU: Kingwin ABT-650MM (650W)
Hard Drive: 1 TB WD Blue

Update I opened the .dmp file.

Microsoft (R) Windows Debugger Version 10.0.15063.468 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\KevinLaw\Desktop\122917-25218-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*
Executable search path is:
Windows 10 Kernel Version 16299 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Machine Name:
Kernel base = 0xfffff802`e008a000 PsLoadedModuleList = 0xfffff802`e03ebff0
Debug session time: Fri Dec 29 16:05:45.514 2017 (UTC - 8:00)
System Uptime: 0 days 0:00:08.208
Loading Kernel Symbols
...............................................................
.....
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging informati... Read more

Read other answers
RELEVANCY SCORE 48.4

Hello All,

Laptop Acer 5620, WinXP Pro SP3.

Has started taking longer to shutdown/startup and when checking the event viewer I see an entry for a bugcheck.

Event: 1000
Source: Save Dump
Category: none

The computer has rebooted from a bugcheck. The bugcheck was:
0x00000050 (0xfffffff9, 0x00000001, 0xbf931be4, 0x00000000). A full dump was not saved.

I never see a BSOD and this event log is all I ever see, it never saves a full dump despite various cofigurations on startup and recovery, overwrite ticked, tried full dump, minidump etc...

I can't use a system restore to go back as it wont go back far enough before the events started happening.

I've tried http://support.microsoft.com/kb/894278 and http://support.microsoft.com/kb/329293 but it made no difference.

I've used WinDbg to try opening an older memory.dmp file, but it appears it is corrupt or does not have the symbol path in order to give me any more information.

I've tried updating the display drivers and restarting but it made no difference.

I've tried uninstalling McAfee AV and restarting but the event is still there.

I have a ran a number of passes with memtest86+ and no errors appeared.

I've ran a malwarebytes anti-malware and McAfee AV scan and found nothing serious.

I could re-build back to default when I got the laptop or another WinXP pro disk, but I hate admitting defeat at not being able to fix it and also I've spent quite a bit of time getting the laptop the way I... Read more

A:Computer rebooted from bugcheck

Navigate to C:/Windows/minidump. If there are any files there, zip them up and upload to your next post. I'll see if I can diagnose the problem.

Does your system still shutdown/startup? It just takes awhile to do so?

Read other 13 answers
RELEVANCY SCORE 48.4

The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xff0d6000, 0x00000000, 0x8053cb35, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini031712-01.dmp.
 

A:The computer has rebooted from a bugcheck

Okay, we know where the minidump was saved but we don't have access to your computer Go here and read how to post your minidumps. You attach them and you may have to ZIP them:
http://www.techspot.com/vb/topic51365.html

Take your time...
 

Read other 1 answers
RELEVANCY SCORE 48.4

I got this error in the event viewer
I upload the minidumpfile to see if anyone can help

Thank you everyone in advance

A:The computer has rebooted from a bugcheck.

Update your network and wireless network drivers.
More to follow in the AM

Read other 2 answers
RELEVANCY SCORE 48.4

While trying to find out why my XP Pro machine takes so long to shut-down & start up (it just started doing this a few weeks ago), I found an entry in the Event Viewer that may explain it:


Quote:




The computer has rebooted from a bugcheck.
The bugcheck was: 0x000000ea (0x877d9b98, 0x879837b0, 0xbacffcbc, 0x00000001). A full dump was not saved.




I read a page on MS's site that said you could read the dumpchk file and use it's code to associate it to a particular (usually) driver that is causing the fault, but I am unable to get the machine to actually save a .dmp file.

I have gone to the Startup & Recovery>Settings page and changed the configuration every which way, but can still find no dumpfile anywhere on the hardrive.

I suspect this is because last week I was trying to remove an MSCONFIG entry "dumprep" that would not go away, and I think I modified the registry in order to do so. (But that didn't work either, the "dumprep" entry remains in my MSCONFIG file.

How can I get my computer to create and save a dump file ?

A:The computer has rebooted from a bugcheck.

the error usually relates to the nvidia driver

Read other 11 answers
RELEVANCY SCORE 48.4

So as the title states, anytime I reboot my computer from Windows it doesn't boot back up on it's own, it just turns off as if you told it to shut down. I looked in the BIOS and didn't see anything to the effect, and searching around online didn't turn up anything useful. I'm not really sure whether this is a software or hardware issue. Anyone have thoughts on this? (specs are filled out in the my system thing)

A:Computer Stays off When Rebooted

Make "New" file (shortcut) on desktop and put this "%windir%\System32\shutdown.exe -R -F -T 00" (no quotes) in Target field and see if works.

Read other 5 answers
RELEVANCY SCORE 48.4

Its SO annoying, i keep going to bed (leaving my torrents downloading, and when i get up in the morning my system has rebooted...
Event Viewer says:
"The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x7c23c07c, 0x00000002, 0x00000001, 0x8053138f). A dump was saved in: C:\WINDOWS\Minidump\Mini042504-01.dmp."

I hear that you can turn the reboot setting off, but i don't know how... Can anyone tell me how, or tell me anotherfix for this??

*^_^*
Matt.
 

A:The computer has rebooted from a bugcheck.

Read other 8 answers
RELEVANCY SCORE 48.4

Hello guys... it's been a long time since I posted on this forum :) Hope you all are doing allright :)

Have this problem happening to me lately... Is there any way I can fix it?

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000004e (0x00000002, 0x0005bab4, 0x0007ff9f, 0x00000001). A dump was saved in: C:\WINDOWS\Minidump\Mini010909-01.dmp.

And I've also attached the minidump file....

Thank's a lot!

A:The computer has rebooted from a bugcheck.

any help guys????

Please ... want to sort this problem out....... got fed up of my pc restarting...

Read other 6 answers
RELEVANCY SCORE 48.4

Hello,

My computer continues to crash with the event viewer error:


The computer has rebooted from a bugcheck. The bugcheck was: 0x00000116 (0xfffffa8006c3f390, 0xfffff88005791380, 0x0000000000000000, 0x000000000000000d). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 120909-16146-01.


When the crash happens the screen first becomes distorted and then BSOD. That led me to believe that it had something to do with the Video driver. The action center also indicates an error with the video cardbut no solution. I have re installed the video driver and also updated the driver update from NVIDIA. The display driver is NVIDIA Quadro NVS 295.

I am running Windows 7 64bit 4gb RAM. I have attached the dmp file and some other errors. I have looked around this forum and others and found people having this same problem but none of their solutions have worked for me.

A:The computer has rebooted from a bugcheck

The bugcheck = 0x50 - invalid memory referenced; NVIDIA named as the probable cause

I believe these drivers need to be looked at here - especially the 1st - a VM Ethernet kernel mode driver. The 2nd set "VST" - Conexant audio, usually not a problem, but am mentioning them here b/c they are among the oldest drivers found in the dump.. The VM drivers are the oldest.
Code:
VMNET.SYS Thu May 22 06:33:54 2008 (48354C12)
vmci.sys Tue Oct 28 20:57:29 2008 (4907B4F9)
hcmon.sys Tue Oct 28 21:27:43 2008 (4907BC0F)
VMkbd.sys Tue Oct 28 22:36:36 2008 (4907CC34)
vmx86.sys Tue Oct 28 23:04:03 2008 (4907D2A3)

VSTCNXT6.SYS Wed Oct 15 20:52:22 2008 (48F69046)
VSTBS26.SYS Wed Oct 15 20:54:06 2008 (48F690AE)
VSTDPV6.SYS Wed Oct 15 20:57:45 2008 (48F69189)
Ironically, your Logiteck USB Monitor drivers are the newest - you have a brand new Oct 1 2009 DirectX Kernel driver, Sept 27 NVIDIA and Oct 7 Logitech USB Monitor Filter drivers -

Code:
nvlddmkm.sys Sun Sep 27 20:12:06 2009 (4ABFFF56) - NVIDIA
dxgkrnl.sys Thu Oct 01 21:00:14 2009 (4AC5509E) - DXGK

LVPr2M64.sys Wed Oct 07 04:26:50 2009 (4ACC50CA)
lvrs64.sys Wed Oct 07 04:27:59 2009 (4ACC510F)
lvuvc64.sys Wed Oct 07 04:28:44 2009 (4ACC513C)
I would check the Logitech out - when were they installed & when did the BSODs start?

Regards. . .

jcgriff2

.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loadi... Read more

Read other 6 answers
RELEVANCY SCORE 48.4

I keep having problems with my laptop- windows 7 is freezing many times a day and needs
a restart.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8004c06440, 0xfffff80000b9c518, 0xfffffa8001fd2610). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 060610-32947-01.

The .dmp file itself is 311 mb so its difficult to upload it here. Can anyone
help, what might I try to get this problem solved.

Thank you,
Kustas

A:The computer has rebooted from a bugcheck

Zip up the dump file (that'll make it smaller), then upload it to a free, file-hosting service and post the link here.

Follow the instructions at this link to set your system to make Minidumps in the C:\Windows\Minidump directory: Set MiniDump

Information on the STOP 0x9F error (the info that you posted): BSOD Index

To proceed further (while awaiting the analysis of the large memory dump file, please run Driver Verifier according to these directions:




Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Se... Read more

Read other 9 answers
RELEVANCY SCORE 48.4

Ok...I just installed 2 gigs of RAM into my machine and hooked the monitor up to the wrong spot on the back (the MB spot rather than the vid card) Anyway, I could see the machine boot up, check the keyboard, etc, except for a black monitor. After it booted, I heard the bubbles popping up that say Detected new Hardware or whatever (couldn't see them...) Anyway, it rebooted itself while I was at a loss as to why no monitor. Got that figured out after shutting the system down blind. Started it up again and everything seemed to be fine for about 6-7 minutes. I had 4 windows open and minimized (with 3 sites I access frequently so I leave them there and the 4th I surf with) I had MSN Im running also. I then clicked on my Steam icon to start that because when I'm not playing on our game server, I monitor the server thru it. When after clicking on that the screen when black and the computer rebooted itself.

I found this in the Event logger:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x00041284, 0x77c01001, 0x00000000, 0xc0883000). A dump was saved in: C:\WINDOWS\Minidump\Mini110707-02.dmp

Can anyone tell me what this is - other than a memory issue? And would just installing new RAM cause something like this? System has been running now for about an hour without a repeat (but I've only 3 windows and Steam running, no 4th window and no IM.)

Thanks,
raven
 

A:Computer has rebooted from a bugcheck?

Read other 16 answers
RELEVANCY SCORE 48.4

Hi All,

my file server is a windows server 2008 R2 which is a vmware virtual machine.
last night it crashed and I found in the logs the event id 1001 source bugcheck.

I wanted to upload the memory dump but its over a gig so I just copied the full event:

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xfffff8a0229c0fe8, 0x0000000000000000, 0xfffff8800444e390, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111112-21949-01.

any idea why did the vm crashed?

thank you,

Assaf
 

A:The computer has rebooted from a bugcheck

Post the minidump(s) by going to C:\windows\minidump. Minidump files have a .dmp extension. Select all the .dmp files and right-click sending them to a compressed(zipped)folder. Upload that folder as a file here
 

Read other 1 answers
RELEVANCY SCORE 48.4

I have setup of windows server 2012 cluster machines.any one of the machine is always rebooting from bugcheck with below error coad.
The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000001e (0xffffffffc0000094, 0xfffff801dac14256, 0xffffd001d794db30, 0x0000000000000011). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 021219-123437-01.
please suggest a solution for this i am frustrated due to this issue now....

Read other answers
RELEVANCY SCORE 48.4

Windows 10 Pro 64bit, anyone have any ideas?

 

A:Computer rebooted from a bugcheck

You need to upload the memory dump file for us to help. The file location is stated inside the screenshot.
 

Read other 5 answers
RELEVANCY SCORE 48.4

Hi there I'm a new member here my issue is with the theme I have a windows aero theme for xp and every time i reboot my computer the theme changes to windows classic theme please help
 

A:Theme changes when computer is rebooted

Read other 12 answers
RELEVANCY SCORE 48.4

Hello,
I am hoping someone can help with this. I have searched for a resolution and am not able to find one so far. It seems that every other day (approximately) my pc reboots from a bugcheck. The Debugging details show the following info:
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request.  Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001200, (reserved)
Arg3: 0000000000000000, Memory contents of the pool block
Arg4: fffff901451facd0, Address of the block of pool being deallocated

Debugging Details:
------------------


POOL_ADDRESS:  fffff901451facd0 

FREED_POOL_TAG:  Gvds

BUGCHECK_STR:  0xc2_7_Gvds

DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT

PROCESS_NAME:  csrss.exe

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17336 (debuggers(dbg).150226-1500) x86fre

LAST_CONTROL_TRANSFER:  from fffff800d4524f5c to fffff800d43d38a0

STACK_TEXT:  
ffffd000`288e0e78 fffff800`d4524f5c : 00000000`000000c2 00000000`00000007 00000000`00001200 00000000`00000000 : nt!KeBugCheckEx
ffffd000`288e0e80 fffff960`00413a12 : 00000000`00000000 fffff901`451facd0 fffff901`49558010 ffffd000`00000000 : nt!ExDeferredFreePool+0x6ec
ffffd000`288e0f70 fffff960`00189b74 : fffff901`47a17e00 00000008`00000008 ffffd000`288e12d0 00000000`00000021 : win32k!MulDisablePDEV+0x22
ffff... Read more

Read other answers
RELEVANCY SCORE 48.4

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000e1 (0xfffff80001abc03c, 0x0000000000000002, 0xfffffa8004551b80, 0xfffffa8004551b80). A dump was saved in: C:\Windows\Minidump\Mini101711-02.dmp.

For this problem am getting frequently can you any give me the solution of this

My OS Is Windows Server Standard 2008 64 Bit

Can U please help me on this

Please find the bug.txt file also its taken from blue screen viewer and give me the solution on this

Syed Hasain

A:The computer has rebooted from a bugcheck

Can you please provide us a JCGriff Report? Also, if this is not a production server, please turn on Driver Verifier while we're trying to find the problem. Thanks.

Read other 10 answers
RELEVANCY SCORE 48.4

My Laptop reboots suddenly giving blue screen. I've seen other posts about this. How can I upload minidump?
The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff805a3aa7997, 0xffff948098cda870, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: a6404270-0a5a-47d8-b179-0b4ea90e28b1.

Read other answers
RELEVANCY SCORE 48.4

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000e1 (0xfffff80001abc03c, 0x0000000000000002, 0xfffffa8004551b80, 0xfffffa8004551b80). A dump was saved in: C:\Windows\Minidump\Mini101711-02.dmp.

For this problem am getting frequently can you any give me the solution of this

My OS Is Windows Server Standard 2008 64 Bit

Can U please help me on this

Syed Hasain

A:The computer has rebooted from a bugcheck

Welcome
If you give us the following information, we can help
Blue Screen of Death (BSOD) Posting Instructions

Read other 10 answers
RELEVANCY SCORE 48.4

I am a newbie for this. Please help me also with the same bugcheck 0x0000009f but I already did the erecovery for factory OS settings for my laptop. Any help?

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8006371060, 0xfffff80000b9c518, 0xfffffa80045b5010). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 022411-39483-01.

And attached here the minidump file.

Thanks a lot.

A:The computer has rebooted from a bugcheck.

Hi nsaidefsoler and Welcome.

Can you begin by uninstalling Norton.

Norton is known to be a cause of BSOD's on Windows 7 systems. I suggest that you uninstall Norton using the Norton Removal Tool ftp://ftp.symantec.com/public/englis...moval_Tool.exe in Safe Mode. Download Blue Screen friendly Microsoft Security Essentials as its replacement. Make sure Windows firewall is enabled!

I'll get back to you when I've been through your dump file.

Read other 4 answers
RELEVANCY SCORE 48.4

Hi newcomer here,

Just recently I've encountered random reboots/BSODs (2-3 times a day)happening to my computer. When I checked Event Viewer the error comes up as The computer has rebooted from a bugcheck. The bugcheck was: 0x0000004e (0x0000000000000002, 0x0000000000182784, 0x00000000001bffff, 0x0000000000000001). I've been going up the wall looking for a solution. Here's a couple of mini-dumps any help or solution from reading these are very welcome and appreciated. Thank you.
 

A:The computer has rebooted from a bugcheck

Of the two dumps the most significant error is 0x4E PFN_LIST_CORRUPT because it is probably the strongest error code indicating corrupted memory and that is what it specifically cited as your issue.

You need to run Memtest on your RAM. It is free and safe.

See the link below and follow the instructions. There is a newer version than what is listed; use the newer. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.

There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Step 2 ? Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.


Link: http://www.techspot.com/vb/topic62524.html


* Get back to us with the results.


*** If Memtest shows no errors then find the voltage specs of your RAM and compare it to the voltage setting in your BIOS. Do they match?
 

Read other 1 answers
RELEVANCY SCORE 48.4

I have an Error event in Event Viewer\system: Event ID 1001, description = The computer has rebooted from a bugcheck. The bugcheck was:

0x1000008e (0xc0000005, 0x804e58a0, 0xf30529a8, 0x00000000). A dump was saved in....


I don't know how to read the dump file or upload it to site (don't have time just now to find out, sorry).

Also have error in Event Viewer\Application: Event ID 19011, source = MSSQL$QUEST. Description = The description for Event ID (19011) in source (MSSQL$QUEST) cannont be found. The local computer may not have the necessary registry info or message DLL files to display masseages from a remote computer. You may be able to use the /AUXSOURCE = flag to retrieve this description; see HELP and SUPPORT for details. The following info is part of the event: (SpnRegister) : Error 1355.



My windows XP systems keeps shutting down. I've also noticed in device manager, Sound, Video and game controllers - Multimedia Audio Controller, has a yellow exclamation mark telling me the drivers are not installed.


Could this be causing all the probs???

A:Computer Rebooted from a Bugcheck

reinstall audio dirver to see if can be good.

Read other 1 answers
RELEVANCY SCORE 48.4

please help. here is the link of minidump
https://meinhardtchina-my.sharepoint.com/:u:/g/personal/chrislee_meinhardt_com_hk/EQUk_L9ywpdBum9YPpko5VIBkqYKG2FoqOBsama6rQIXcw?e=qDEczC

Thanks a lot!

Read other answers
RELEVANCY SCORE 48.4

can someone help me with this

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 19/08/2009 00:22:26
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Midnight2
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8009c35890, 0xfffff80000b9c518, 0xfffffa8007bff700). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081909-25584-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-08-18T23:22:26.000000000Z" />
<EventRecordID>1994</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>Midnight2</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x0000009f (0x000... Read more

A:The computer has rebooted from a bugchec

this is in relation to my computer rebooting intermittantly, should i provide a dmp file ?

Read other 4 answers
RELEVANCY SCORE 48

Hi. First of all thanks for taking the time to read this.

I have a Windows XP computer that was running great until this morning. I ran up the stairs and I guess by doing so I gained some static on my feet (through my slippers wtf?) and when I extended my arm to push the power button on my computer some static jumped from my finger to the button and started the computer itself. At first i thought it was pretty cool but realized how wrong I was when the system shut itself down after only 3 seconds of attempting to boot. I powercycled the powersupply (clicked it on and off) and then tried powering the PC again... nothing happened, It didn't even respond. After ten minuets or so I decided to try again and It actually started to boot, but then 3-4 seconds later it just instantly shutdown just as before.

Any help would be appreciated. I know static = death with computers but im hoping maybe, just maybe it could be a problem with the button itself (not giving enough of a signal to start or something) or something small like it (i dont want to but a whole new MB).

Thank you for taking the time to read this, and even more gratitude to those who take the time to reply and help!

-Macintuss

 

A:Computer Starts & Instantly Shuts Down.

Read other 11 answers
RELEVANCY SCORE 48

I have a problem i noticed i have for about 3-4 days
My computer restarts every some minutes when im browsing in Mozilla Firefox(but not in Internet explorer)
And when i try to play in BFBC2 , my computer restarts before i even manage to get into a server
Or , when i try to play Red Faction Armageddon in directx 10/11 mode, it instantly reboots the computer, but not in directx 9 mode

I don't think this is a dust/heat problem, because i checked in GPU-Z and Speedfan the temperatures and they are normal, i cleaned the computer before some weeks and the fans are ok

I tried formating C: and reinstalling windows 7, installed ATI driver, and did a full windows update, and i still have the problem

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64 bit
- the original installed OS on the system? computer came without an OS, but this is the main/only OS installed now
- an OEM or full retail version? Retail
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? About 3 years i think, i have a second 2gb ram stick i bought some months ago
- What is the age of OS installation (have you re-installed the OS?) 1 day, reinstalled OS today and i still have the problem

CPU is Intel Core2 Duo E8400 @ 3.0 GHz
Graphics card is Radeon HD 4850
I have total 4 gb ram(two sticks of 2gb ram)
Included specs from everest at the zip file
I have a Dell U2211H screen that i bought some months ago
And a Gigabyte S-Series motherboard

... Read more

A:Computer restarts almost instantly in some games

  
Quote: Originally Posted by NMDanny


I have a problem i noticed i have for about 3-4 days
My computer restarts every some minutes when im browsing in Mozilla Firefox(but not in Internet explorer)
And when i try to play in BFBC2 , my computer restarts before i even manage to get into a server
Or , when i try to play Red Faction Armageddon in directx 10/11 mode, it instantly reboots the computer, but not in directx 9 mode

I don't think this is a dust/heat problem, because i checked in GPU-Z and Speedfan the temperatures and they are normal, i cleaned the computer before some weeks and the fans are ok

I tried formating C: and reinstalling windows 7, installed ATI driver, and did a full windows update, and i still have the problem

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64 bit
- the original installed OS on the system? computer came without an OS, but this is the main/only OS installed now
- an OEM or full retail version? Retail
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? About 3 years i think, i have a second 2gb ram stick i bought some months ago
- What is the age of OS installation (have you re-installed the OS?) 1 day, reinstalled OS today and i still have the problem

CPU is Intel Core2 Duo E8400 @ 3.0 GHz
Graphics card is Radeon HD 4850
I have total 4 gb ram(two sticks of 2gb ram)
Included specs from everest at the zip file
I have a Dell U2211H sc... Read more

Read other 4 answers
RELEVANCY SCORE 48

i tried clearing CMOS, i tried switching the ram sticks, i tried switching PSU, tried without a GPU.Also tried with just the CPU 12v ATX and the 24 pins connected and same problem everytime... the computer will turn on when i press the power button and the fans will start turning but all that for not even half a second....
 

A:computer instantly turns off after half a second

im running a GA Z77P-D3 motherboard with a EVGA GTX 1060 3gb with 8gb of ram and an I-5 2500
 

Read other 2 answers
RELEVANCY SCORE 48

Hi, any advice at all much appreciated. PC specs: Novatech FX-8 8320, 120gb SSD + 2TB hard disk, 16gb ram, windows 7 64 bit, 2.5 years old.
 
Had the odd random power down in the past, but over the last 2 days my PC keeps powering off instantly with no warning, and when I turn it back on it doesn't last very long until it powers off again (about 30 mins tops in safe mode).
 
Things tried already:
 
Ran a health report, said 'avg. disk queue length 3 - disk may be at maximum capacity due to throughput and disk seeks', but looked again after a temperamental system restore and wasn't there, yet still had the problem. It also said it didn't see an antivirus software installed, but I have Avast free version installed, and ran a virus check with this which didn't come back with any viruses (said vlc and adobe needed updating, and there were some performance issues but wouldn't resolve on free version).
 
I tried changing the power settings to balanced, disabled the antivirus temporarily, and dusted the inside the PC with that special computer spray stuff, but none of that helped.
 
I tried a system restore in startup repair which didn't work, and tried another one from a restore point a week ago, but the PC powered down before it got anywhere. I also tried one in safe mode and got the same result, and sometimes the PC powers down right after selecting startup repair when it's booting up.
 
I tried a disk cleanup on the SSD, but as soon as it's starting... Read more

Read other answers
RELEVANCY SCORE 48

My PC has been shutting down at any given time during web browsing...i use mozilla and have XP Home SP3. i have a log to post and can put more info later when i return from work...

(Edit): I have a Compaq Presario V4000 Laptop with an Intel Celeron M processor 1.40GHz 502MB RAM Mobile Intel 915GM/GMS Express Chipset Family. Today I ran a quick scan with Malwarebytes and it found 4 infections, all of them registry errors. I quarantined them and restarted.While I was browsing the web (stumbling), I was watching a video and then it suddenly went off, with no warning. It's happened before when I plug something into my 2nd USB Port, so I haven't used it since. Also, when I start up my PC and the desktop pops up, an error pops up

If there is anything else I should post on here let me know, and i'll do so...
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:44:37 PM, on 7/16/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\Explorer.EXE
C:\Program Files\Analog Devices\SoundMAX\SMax4PNP.exe
C:\Program Files\Apoint2K\Apoint.exe
C:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exe
C:\Program Files\Hp\HP Software Update\HPWuSchd2.exe
C:\Program Files\HPQ\Quick Launch Buttons\EabServr.exe
C:\Program Files\Micro Innovations\Wireless Keyboard & Mouse Driver\StartAutorun.exe
C:\Program Files\Micro Innovations\Wireless Keyboard & Mouse Driver\KMConf... Read more

A:Computer shuts off instantly at any time...

so its still happening but, i dont think it happens when i unplug my adapter...anyone??
 

Read other 2 answers
RELEVANCY SCORE 47.6

I need some help with this HP Z420 workstation.

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 9/11/2013 7:06:14 AM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Not important
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xfffff8800194b0d2). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 091113-27440-01.
Event Xml:
<Event xmlns="Error">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-11T13:06:14.000000000Z" />
<EventRecordID>111408</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>MALLARDW702</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x000000d1 (0x0000000000000000, 0x00... Read more

A:The computer has rebooted from a bugcheck. 0x000000d1

You uploaded the SF Diag Tool itself. We need the data generated by it.

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 4 answers
RELEVANCY SCORE 47.6

Hi
I've been struggling with my daughter's netbook, a dell mini 1012, for a while now. At first it was just running slow compared to my other daughter's netbook, so I swapped around the hard disks and it appeared that it was the hard disk that was causing the netbook to run slow.
I've bought a new hard disk, installed it into the netbook and put the old drive into a box and now the netbook is frequently crashing and blue screening especially when copying files from the hard drive.

I have run the tool in safe mode only as the netbook wouldn't let me run it in normal mode without BSOD.

A:BSOD - Computer rebooted from bugcheck

Hi

Based on the BSOD most of them refer to memory corruption... though there are problem devices that was also a cause..

So first let get the hardware out of the loop..

1. Do a memtest for atleast 6 to 8 passes for each slot 1 RAM Stick at a time....

2. Remove Mcafee and install MSE.... one of the BSOD was caused do this .... and its one of the problem device mentioned in your device manager. And MSE is light on the system... you just have 2GB of RAM

3. Your system has updates specifically the BIOS for version A12 which is marked as urgent by DELL..

Get these done first and let me know so we can move onto the next step

Read other 6 answers