Over 1 million tech questions and answers.

Memory card error on Canon A720, Help!

Q: Memory card error on Canon A720, Help!

Hello out there.

I have a new A720 IS camera. Purchased a 1GB card from Best Buy. took a lot of pictures 200+ then screen came up with "Memory card error. Could not see any of the pictures or take any more. Bought a new card at Radio Shack, SanDisk, 2GB, took 166 picture. Used a Key Span card reader connected to a Mac Dual 867 MHz PowerPC G4, 1MB L3 cache per processor. Has 1.5 GB DDR SDRAM memory. After importing the 166 pictures was only able to open 61 because the rest were "corrupted" or had an "unidentifiable jpeg marker".

Also nothing transfers or imports from the first card. It has the Letters SD, and DANE-ELEC on the face of the card.

Is this a problem with the card? or the camera? Can I save any of the pictures? It was a wonderful week at Mammoth and I will not have the opportunity again.

I am not an experienced digital camera trouble shooter. Lots of the directions are "Greek" to me. Would appreciate simple step by step help. Thanks to any and all who have a suggestion and help. Jaysfly:

Preferred Solution: Memory card error on Canon A720, Help!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Memory card error on Canon A720, Help!

Sound to me, after you've had problems with two cards that it's the camera.

Read other 2 answers

I'm experiencing a new problem with my S1. Whenever I take pictures it overwrites the existing picture in the card. Sometimes it gives me memory card error. When I switch off and swich on again, it says "No Image".

I'm using a 4GB card. When I check the memory status, it says 750MB used. I formated it. Then shows me 4GB free space. Switch off and ON. It says 750MB used.

Another funny thing is I replaced the 4GB with my 32MB CF card. Now it says 4GB free space. Formated it. Again it says 4GB free space. Switch off and ON. 750MB used (from 32MB???).

Now it has become worst. I can take only 1 picture now. Soon it gives me "Memory card error!"

Can someone help me with this issue. This is not even an year old.

A:Canon S1 - Memory card error

Read other 8 answers

I have a Canon A720 powershot. All was working fine for months. Took the SD card out to download pictures, replaced it in the camera and now I cannot review any pictures on the camera. I toggle the switch to look at the pictures and the camera powers off. When I turn it back on (in the review photos mode) it says there is no memory card. If I put it back into take pictures mode and cycle the power off and on, the error is gone and I am able to take pictures. They register on the memory card, but I am never able to see pictures on the view mode. I take out the card, and download to the computer and all is fine. I am just not able to see any pictures on the camera. I have switched memory cards, changed batteries with no results. Anyone ever seen this before??

A:Canon no memory card error

Read other 8 answers

I have a 8gb Emtec SD Card and took 2 pictures and got a message. I shut the camera off and turned it back on again and get a message that says "Memory Card Error Format This Card" I hit no. The same thing happened when i put it in my computer. I checked and the card is full. If I format the card, I lose everything that I have on it. Does anybody have any ideas on what I could do to not loose all the pictures and videos that I have on this card?

Read other answers

Have a micro SD card. I keep getting memory card read error. I have many pic's on there I still want. There has got to be some type of program out there to retrieve them with this error. Any ideas are appreciated, Thanks, B-72.

A:Memory Card error

TestDisk - CGSecurity


PhotoRec - CGSecurity

Not the most intuitive of tools - but they work great.

Read other 4 answers

I have a Canon Powershot A250 digital camera. I have been using a SD DANE-ELEC 512mb memory card. after taking great pics and video at a bachelorette party it suddenly said memory card error. now I cant take pics or view anything on it. even when I try to put the memory card in my printer or computer. I just says memory card error! PLEASE HELP

A:memory card error

Read other 9 answers

Hi peeps,

I have a new canon powershot A60, digital camera.
It worked fine for 2 days, but now, when I switch it on it says "memory card error" so I can't use it.
What can I do to make the card work again?


A:memory card error

Check out your documentation to see how to format the card. I think that will get you back on the air again.

Read other 3 answers

HI.. I purchased a new 32 MB Kingston card.. took my daughters wedding pictures.. one video and 92 pictures.. Ok.. when I inserted the card in my laptop reader I said to copy to a folder... at that time the video loaded and part of one picture.. after that all the rest of the pictures were loaded but not able to be opened.. one picture is half open and I feel the pictures are not viewable because the pictures plit in hald another words picture one is half video and half the picture and then the rest are half of the next picture that was taken after... so another words each picture is half of another picture and this is why they are not accesable....... is their any way to realine the digital card to repair the error in the pictures.. I have read the threads and tried downloading many of the trial repairs... nothing has worked... Digital doctor opened all the pictures to the last picture taken... 92 pics of a dresser LOL.... didn't get that one really... I am now running the ZAR 8.5 any idea of how to recover this scrambled photo disk... the card reads error in my camera... but wants to load the pictures to my laptop and I can view the video but all others are blank... again any help or Idea would be awesome... crying of sadness I have lost the only pictures of the wedding group as I was taking the only pictures of the wedding....

A:SD memory card error HELP PLZ

Read other 6 answers

I am not sure if this is the correct place for this or not but I need help. I have Vista home which came with my new computer. I put in my SD card and intended on copying my files to my external hard drive but somehow it started to create a zip file instead. I panicked and clicked on cancel because that is not what I wanted. I think I corrupted something because it now says it is a zip file but it will not open with my zip program so I don't know how to get my photos back where I can see them. Can someone please tell me what I can do to get them back? Vista is so confusing compared to my XP and I cannot access all my Christmas photos. I need simple language please. It tells me it is incomplete. Thanks.

A:Memory card error.


DO NOT copy any files to this memory card. This may well overwrite any photos that are still on there.

There is no guarantee that we can recover any of your photographs, but I will do my best. Got to this website and download the latest version of Recuva (link in top right hand corner of webpage): Download Recuva 1.35.472 - FileHippo.com

Install Recuva and then run it (if a second wizard appears after installation, it is alredy running, as it will look like another install wizard)

In this new wizard, click next on the first page, then select Pictures from the top of the second page, and click next again. On the third page, select "On my Media Cad or iPod" and click next. On the first go, I would recommend not selecting Deep Scan, but only because of time, so you may want to if you have a spare half an hour.

When it start scanning, click Cancel. DO THIS! In the top right hand corner of the new window, click "Switch to Advanced Mode" Go on to Computer (My Computer in Windows XP), and work out which drive letter your media card has been assigned. Go back to Recuva and select this from the drop down in the top left hand corner. If necessary, scan again with a Deep Scan. Then recover any files any files that are found. N.B: Most photos that have ever been on the memory card will turn up, not just the ones you want.

If you have any problems with any of these instructions, just post back and I will assist you.

Due to you cancelling the zipping up, not... Read more

Read other 3 answers

I have a samsung nv24hd camera. I bought a pny 8gb card. card was working fine. til i went to my camera menu and hit format. At that point I got a card error message. Since the card was working just fine did I even need to format it? How do i fix the issue now?

A:memory card error

are you sure the camera can use a 8gb card? have you tried to reformat it again? try reformatting it in the computer. could be a bad memory card. try a different one. and see if it works

Read other 1 answers

Hi Everyone,
I'm new to this forum but I have a huge problem.
Recently I took pictures from my SLR cannon camera. They pictures were very important and business related.

When i put the card into my computer to transfer all the data, my driver (f) said it was not formatted and to format now. If i clicked yes, it would delete all my data. When I put the card back in my camera, it now says error.

I don't want to delete any of the data and neither do I want to pay for any software especially if it is an easy fix.

Is there anyway I can get my memory card up and running again?

A:Memory card error for Cannon

Unfortunately, it sounds as if the card has developed a fault and there is unlikely to be a way to correct it.

Other members might be able to add further suggestions.

Read other 1 answers

I need help on something, when i run dxdiag it shows that i have 1011MB of vram, but when i run gpu-z it shows that i have 256MB, so i dont know which one is my real vram , but my graphics card(8400gs) is overclocked from : Core Clock - 451 Mhz, Shader Clock - 1113 Mhz, Memory Clock - 266 Mhz To Core Clock - 690 Mhz, Shader Clock - 1703, Memory Clock - 315 Mhz... Please tell me which one is my real Vram.. tqs

A:Graphics card memory error

Hard to say based only on this information as the 8400gs came in
and 1024 models.
So both are actually possible.

Dxdiag I know is not always right my old 8800gt nvidia card would often read as having over 2gigs when it only had 512meg.
Overclocking can also confuse things.
Based on the information at hand I can't really say which is right for sure though, they are both possible.

Read other 5 answers

Can anyone help me ?
I have a Sony Cyber-shot DSC-S2000 and when I switch it on it says error formatting memory card.
Is there any way of fixing this problem and will it erase all my pictures?

Any help would be much appreciated.

A:Error formatting memory card ?

Hi and welcome

I'd recommend plugging the camera into your PC and retrieving your photos from there. (it should have come with a USB cable)

If you can do that, then formatting the card afterwards should solve the error. But do not format the card before trying to get your photos first, otherwise they will get deleted.

Read other 1 answers

i have a corrupted micro sd card and i am trying to create partition using disk management and diskpart. but it gives the following error

the semaphore timeout period has expired  

Plz help

Ali Usman

Read other answers

hi guys n gals. I have an e310, which I was running a ati radeon x700 (pciex16) thru a startech adapter to my pciex1 slot, card ran fine, recently purchased geforce 8600gts and tried to install ,(also thru x16 to x1 adapter),got bsod, memory parity error,system has shutdown. am running windows xp media center edition, service pak 3, any clues how to end this problem,. or do i just have a bad card?

A:New vid card/memory parity error

Return or replace the card

Read other 1 answers

I'm a novice when it comes to cameras and wondered if anyone could help me. I have a Pentax Optio 60 which I have used 6/7 times from new, I came to use it the other day and it was showing memory card error, I have tried different SD cards and it doesn't solve my problem I have also done a factory reset and that didn't help. Can anything be done to repair my camera. Thankyou for any help given. pin62. p.s It works ok just using the built in memory.

A:Solved: Memory card error.

can you format the memory card or do you not get that option ?

Read other 10 answers

ive tried to use the memory card slot on the phone and the bluetooth but the memory card wont read and the blurtooth wont accept or send any thing any help?

A:LG vx855 Bluetooth/memory card error

Which way are you trying to send a file?
Phone to pc? Or pc to phone?
You need to make the target 'discoverable' and search from the 'source' to make a 'pair' with the target. Then find the file you want to send,(right-click) send...via..bluetooth and it will transfer.
It might be easier to get a USB cable to join phone to pc USB port.
Then open two explorer windows, and drag and drop the files across, (or copy & paste).
* Does the pc have bluetooth built-in?

Read other 1 answers

My Nikon COOLPIX S560 just crapped out. I had at least 30 photos on the memory card. I am unable to check these photos on the camera and when I put the memory card in the card reader in my computer, it does not recognize the SD card. In fact, the drive times out because there isn't any communication with the media. The recovery software I have will not work without the card being recognized by the card reader. I cannot check for the files on the camera, and my computer cannot read the card. Does anyone have any suggestions on how I can get these photos off the memory card?

A:Solved: SD Memory Card Error & Recovery

Read other 8 answers

Good morning/afternoon,

I just returned from my vacation to find I can't view my digital pictures from my sd memory card. I have a Pentax Optio E30 digital camera. I had purched a new Kingston 4GM sd memory card just before my vacation. I was able to take pictures and view them all through my vacation. I came home and inserted my sd card into a card reader which might have caused the issue as it is not USB2 or it might not accept a 4gb card and somehow corrupted it. I looked up my error of "memory card error" and I see you can use data recovery programs to get the pics back. I tried a few free ones to see if the pics are still there and I did not see them. Am I out of luck? I don't mind paying for a program if I know it will work. I can't even view the pics anymore on my cameria as I get the same error. I can see the drive on my computer but I just seem to have lost everything. Does anyone know if a good program that is easy to use that might get my pictures back?

A:error on memory card - lost all my pictures

Read other 10 answers

I have recently bought a Sony W310 camera and a 4gb memory card. when i insert the memory card the camera screen reads 'error formatting memory card'. i have tried formatting it on my laptop and that seems to work, any help

Read other answers

When I connect usb cable from my Motorola W230 to access the memory card it connects and then vanishes and then appears the message that the usb device was not recognized, I have all the drivers installed but not working dfe all.
Before formatting my pc it worked!
When I go to device management I see the message: unknown device (error 43).
I want an urgent solution please!

A:Phone's memory card unknown device (error 43)

When you formatted your hard drive, did you change operating systems? If yes, what did you have?

Read other 2 answers

I bought used parts.

Intel Core i5-760
Asus P7P55D
OCZ Gold 8GB (4x2gb) DDR3 PC3-10666 CL9
Saphire Radeon HD 6850
Enermax Liberty 400Watt PSU ELT400AWT
For now I use HDMI cable not DVI to connect to a monitor.
When I first turned on computer first thing I saw were artifacts.

I thought video card is broken, so I need to change it, but that's not only problem I had.
I couldn't even install Windows 7 32 or 64bit. I got memory errors all the time.
So I removed RAMs one by one.
What I noticed with RAMs are -
1) with 4 RAM modules I couldn't install windows I got memory errors
2) With one RAM module computer didn't even start, just black screen and no beep sound at begin.
3) also computer didn't started when I put two modules in slot 1 and 3.
4) I could start computer and managed to install windows with two modules in slots 2 and 4.
5) I could start windows (already installed) with all 4 modules. And it showed 8Gb RAM. But time by time I got Memory

6) Windows Memory diagnostic tool didn't show any error.

I installed ATI drivers and artifacts became even worse.

Catalyst stops to work constantly, with all four RAMs windows explorer stops working and restarts all the time.

Sometimes I get blue screen.

Bug Check Code 0x0000001a
Parameter 1 00000000`00041790
Parameter 2 fff... Read more

A:Video Card artifacts, Memory error, BSOD = all in one

Welcome aboard.

Post it following the Blue Screen of Death (BSOD) Posting Instructions?

Read other 1 answers

Can anyone tell me why I might be getting a Memory Parity Error on boot after installing a PCI expansion card in the open slot on my Optiplex 780 SFF? No video card in the PCIe slot and the system works fine until I put in the 32 bit firewire card. Then it starts to load and dumps to: 
*** Hardware MalfunctionCall your hardware vendor for supportNMI: Parity Check/Memory Parity Error*** The system has halted ***?
I got this with two separate cards, one used and working when pulled, one new out of the box, so it's not a bad part. No other upgrade or changes to system that's been operating for years without a hiccup. Running Windows 7 Pro SP1. Any advice or help would be appreciated.

Read other answers

I just bought 2 new Sandisk 128MB SD cards, 1 for each of my 2 Kodak Cameras. They both work in the older Kodak DX4330 without a hitch. When I insert either card into the Kodak C310 (New camera), it says the empty card's memory is full. I try to format the card from the C310 and it says formatting... and then gives a filesys error e00100. It doesn't format it. I dont have a card reader to try and have the computer format it, but I'm not sure that will work either. I formatted one of the cards with the DX4330 and tried it in the C310, and it still has the same problem. Could there be a problem with the new camera? Could the new camera be incompatible with the Sandisk Memory cards? I am leary of purchasing a Kodak brand card, simply because they are a little more expensive and I'm not sure if it will solve the problem.

A:New Kodak Camera will not format Memory Card - error

Read other 11 answers

My canon Vixia HF M41 internal memory is full but I can't access the files on the camera or with the computer. Any suggestions?

A:Solved: Canon memory full

Read other 6 answers

I recently purchased a Nokia 5800, been transferring music on there like there's no tomorrow. I managed to convert and transfer a couple of video clips last night and I've had nothing but an error message since

Error 0x80070057: the parameter is incorrect

I've tried doing it on a different computer (also with XP Home) and also trying the transfer through a card reader.

Now it won't let me move any apps either!

Anyone, please, any help...at all?

A:Error 0x80070057 message when transfering SOME files to Memory Card


I've closed the other two threads, it is not a good idea to have multiple threads open on the same topic.

What type of video clips were they and where did they originate?



Read other 3 answers

Hi ,
Just wondering, is it my luck? that is the fourth flash memory SD card I try for first use and it gives me memory card error right after inserting it , I used to devices for reading: card reader in my HP officejet printer and Canonpowershot camera.
Cards are:
Patriot signature class 4 4gb
Kingston class 4 8gb
Kingstion micro sd with adapter
last one today Transcend class 10 8gb
I have a old kingston 2 Gb still working fine in the camera and in the HP printer.
I tried all the recovery software I could find to try to format it but the cards are not recognized.
I insert the cards unlocked for first use to format them at first but I can't reach this stage since I have memory card error right away.
I don't know what to do, I find it ridiculous to continue buying cards that won't work.
Any suggestions, ideas would be appreciated.

A:Solved: Flash Cards give memory card error

Read other 9 answers

I recently purchased a Nokia 5800, been transferring music on there like there's no tomorrow. I managed to convert and transfer a couple of video clips last night and I've had nothing but an error message since

Error 0x80070057: the parameter is incorrect

I've tried doing it on a different computer (also with XP Home) and also trying the transfer through a card reader.

Now it won't let me move any apps either!

Anyone, please, any help...at all?

A:Error 0x80070057 message when transfering SOME files to Memory Card

dupe to http://forums.techguy.org/hardware/841204-error-0x80070057-message-when-transfering.html, closing thread.

Read other 1 answers

I recently purchased a Nokia 5800, been transferring music on there like there's no tomorrow. I managed to convert and transfer a couple of video clips last night and I've had nothing but an error message since

Error 0x80070057: the parameter is incorrect

I've tried doing it on a different computer (also with XP Home) and also trying the transfer through a card reader.

Anyone, please, any help...at all?

A:Error 0x80070057 message when transfering SOME files to Memory Card


Read other 1 answers

When attempting to install a Fuji Image Memory Card
Reader DPC-R1 I receive a series of errors:
1. Runtime Error File 53 not found
2. Error in Newdev.dll. Missing Entry: ClientSide Install

I have located the file. It is in:
C:\Windows\Driver Cache
C:\windows\LastGood\System32\Dll cache

I followed the installation instructions by installing
the software with the Memory Card not connected to the
USB, restarting the computer, then attaching the memory
card reader to the USB. When I checked the device driver
it indicated no driver was installed but I could not
browse to install the driver. Does anyone have any


A:Fuji Image Memory Card Runtime Error File 53 not found

Read other 12 answers

I have A720 All-in-One (ideacentre) and currently I have 128GB msata drive and 1TB hdd, my question is can I upgrade my msata drive for SSD 850 EVO mSATA 1TB .. ? Or there is somekind of limit?

Read other answers

Hi all,

Just got myself a brand spanking new Lenovo A720 which should be coming tomorrow and a 256gb crucial SSD. The A720 has Win 7 on it now. I also purchased the Win 8 UPGRADE. I plan to do the following:

1) create a backup image of my win 7 using Acronis
2) install the Crucial SSD (NEVER done this before)
3) create a loadable ISO of the Win 8 on my 3.72gb USB drive (says 4gb but it's really 3.72gb)
4) dual boot Win 7 on the HD and Win 8 on the SSD (using Brink's tutorial) by running the ISO

I have never installed an SSD. I am somewhat proficient with computers but certainly not a tech expert by any means. I am handy and I understand that SSDs are becoming much easier to work with.

Also, before any admins get annoyed at me for saying the dual boot with the upgrade, I want to make all FULLY aware that I 100% intend to delete the Win 7 if I like Win 8. I am just nervous about the functionality of Win 8 and I may decide not to keep it at all. If I dont like it, then I will stick with Win 7. I do NOT plan to keep (or use) TWO operating systems as I assume that is against the EULA. I will only be using ONE.

My question is - am I going to have issues by not having Win 7 already installed on the SSD, if I am doing a clean install of Win 8 on there? There will be nothing for Win 8 to upgrade on the SSD. Is that okay for technical purposes?

A:A720 with 256 gb Crucial SSD with Win 8

I installed Windows 8 and a Mushkin Atlas 240GB mSATA SSD on my A720. The process I will describe below was a bit time consuming, but it was easy.

Step #1: If you have the A720 with the 64GB SSD, disable RapidDrive. You should be able to see a program called RapidDrive in your Windows search. Run it, make sure everything is disabled. Then go to uninstall programs and uninstall it.

Step #2: Create recovery disks
--> Run "lenovo rescue system"
--> Select "create recovery disc"
--> I have a 64GB C: drive. It estimated 8 disks but needed only 6. It took two hours.

This will create a set of Windows 7 restore disks for your A720. This is a critical step if you only have the Windows 8 upgrade since you must upgrade from a drive with a valid Windows 7 installation. It also is good to have a backup so you can restore the machine to its original Windows 7 shipped state if need be.

NOTE: I read elsewhere that the recovery image must be less than the drive you plan to restore to. Hence, if you are creating recovery disks for a 750GB or 1TB primary drive and plan to install Windows on a 256GB SSD primary drive, make sure that the image is less than 256GB. This wasn't a problem for me since I had the 64GB SSD version of the A720.

Step #3: Register for the Windows 8 upgrade offer at www.windowsupdgradeoffer.com
Use the "download upgrade assistant" and burn a Windows 8 disk.

Step #4: Install the new SSD
On Lenovo's websit... Read more

Read other 17 answers


I purchased one of the new Inspiron 1720 laptops running Vista about 2 weeks ago and only now checked to see if the multiple card reader drive worked and found to my dismay that it doesn't.
When I put an SD card in the drive, the searching for drivers box pops up but it doesn't find anything. I have searched the driver CD that dell supplied with the laptop but still no luck.

When I look in Device manager I get the following error message:

"A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)".

I have tried searching the dell forums to see if anyone else has seen this with their new inspirons but have had no look thus far.

Has anyone else seen this problem?


A:Code 32 error for multiple memory card reader drive - can't find driver

go here and use their online chat...should be able to talk you thru the fix

Read other 1 answers

BonjourJe voudrais retirer la base arrière de mon A720. Une vidéo explique comment le faire, mais je ne peux pas.https://www.lenovoservicetraining.com/showcase?sid=1220&key=TGVuZw== Il n'y a pas de vis, tout se fait en glissant.Il y a un petit onglet au-dessus du pied, mais je ne sais pas si je peux le tirer (risque de le casser).Si vous avez une idée, je vous remercie pour votre réponse. 

Read other answers

I have an A720 IdeaCentre that was taking a long time to boot, then stopped booting all together. I still get power, the fan runs, but nothing appears on the screen. To remedy this, I tried replacing the Samsung HD with a Crucial MX200 500GB SATA 6Gb/s 2.5". I did a one-for-one swap of the two parts, putting the new SSD and what I think is the spacer into the old carrier (metal with holes). I also put the Samsung's rubber bumpers onto the new drive and spacer. Same result: powers on, no boot. I haven't even been able to install Windows. Have I done something wrong (wrong part, forgot a step)? Or does this point to a different issue? If I can provide more info, please let me know. Thanks in advance.

Read other answers

Hi, I have a very strange issue with my a720 thinkcentre. I replaced the harddisk of the thinkcentre with a SSD, after the restart I had a hd password on the new ssdand I don't know why this happened and I don't know this password, because I don't set it.I do the same with a second SSD, because I thought the first SSD was broken or  something else.But now I have two SSDs with an unkown hd password. In the next try, I put the original harddisk back into the thinkcentre and clone the system to the SSD, then I replaced the harddisk with the not empty SSD and it works fine. I don't know what happend with the empty SSD. Why I have now a hd password on it? What is the password? Have someone a little hint for me? Kind Regards,Knut    

Read other answers

I am having issues with RDP after the last MS update.  I can no longer use the old RDP software and now the mouse freezes but only with my desktop A720.  It works ok with my Lenova laptop but is really hard to navigate with small screen.  IT feels like a peripherals driver issue but ni updates?? anyone else have a mouse that freezes with RDP and a HDD screen

Read other answers

How to disable touch buttons bellow screen?  I touch them frequently by accident and e.g. turn off my monitor. 

Read other answers

hi, my sony memory stick says "reinsert the memory card " when i insert it into my cybershot camera. It cant read the memory card, does anybody know what wrong and how to fix it. thanks.

Read other answers

How to disable touch buttons bellow screen?  I touch them frequently by accident and e.g. turn off my monitor. 

Read other answers

Could someone please tell me what video card was used in a canon mt9210 minitower pc?
Thanks Much--- Heavy2

A:{RESOLVED} Canon video card

Read other 7 answers

good morning to all,
please, i forgot to ask what sd card is compatible with the canon powershot a1400 is
sorry for my question but i don't know what sd cards can be used for those digital compact cameras since there different types like microsd, sdhc and microsd that need a special adaptor
i have bought a cheap used canon powershot a1400 just to get some experience before i buy anything better (after so many years with film the experience with a digital compact is different)
thanks in advance

A:what sd card for the canon powershot a1400 is

The support page for your camera is:  https://www.usa.canon.com/internet/portal/us/home/products/details/cameras/point-and-shoot/slim-stylish-cameras/powershot-a1400
The image storage is noted as an SD, SDHC, or SDXC card which is the "normal sized" SD card (a bit less than 1" square), not a micro SD card  (see images of regular, mini, and micro SD cards on this wikipedia page, along with more details).  The HC simply means High Capacity (up to 32GB) and XC eXtended Capacity (up to 2TB).
If you're just shooting photographs the speed class of the card will be irrelevant.  If you're doing video then it might be.  The wikipedia page in the section on Speed Class explains this pretty well.
A multi-gigabyte Class 10 SDHC card that would hold more photos than you could probably take at high resolution (presuming JPG storage, not raw) in several years is dirt cheap these days.  A 1 GB capacity card holds an awful lot of photos.

Read other 12 answers

I've upgraded my A720 to Windows 10 Creators update (1703) and the Device Manager reports this device as not working: Device Type:Other DevicesDevice Description:Multimedia ControllerHardware Ids:PCI\VEN_1002&DEV_AC12&SUBSYS_000312AB&REV_00PCI\VEN_1002&DEV_AC12&SUBSYS_000312ABPCI\VEN_1002&DEV_AC12&CC_048000PCI\VEN_1002&DEV_AC12&CC_0480 Is there a driver that will work on Windows 10 enableing this device?

Read other answers

 Hi  I am wanting to purchase an A720 but have two queries I was hoping could be answered before I do. 1) Appreciate the Lenovo is an all in one PC but can it be used as a touch monitor for another pc.  I.e a working touch monitor for a windows 8 laptop. Connected through the hdmi socket - ?  2) second can someone please confirm the touch screen used in the device I.e USB vendor and product ID per the below guidelines  http://touch-base.com/documentation/Identifying%20Touch%20Screen%20controllers.htm#_Windows Ideally wanting to connect the Lenovo to a mac mini / mac book pro buy some Mac Os X touchscreen drivers and use as a windows and a mac touchscreen. Cheers. John

A:Lenovo IdeaCentre  A720 use as a Touch Monitor 4 a...

You shouldn't buy the A720 now... For two main reasons... A720 doesn't work as it shoud with windows 8. Secondly, Lenovo just anounced A730, with better screen resolution, windows 8 installed. You really should wait for the A730, which will start to ship at June...

Read other 3 answers

How to disable touch buttons bellow screen?  I touch them frequently by accident and e.g. turn off my monitor. 

Read other answers