Over 1 million tech questions and answers.

Corrupt Win7 installer? Error 0x80070570

Q: Corrupt Win7 installer? Error 0x80070570

I'm attempting to install windows to a 40GB SSD and I continuously receive the error 0x80070570. My first thought when I got the error was that it could have been an issue with the file itself. So I redownloaded it and still got the same error and from there I've tried nearly everything listed in other threads relating to this issue. Here's a synopsis of everything I've done thus far.

Start:
Removed old hardware, replaced with new mobo, cpu and gfx card
Downloaded Windows 7 Home Premium from microsoftstore.com
Using the Microsoft supplied tool I created a bootable USB flash drive with the ISO
Powered the new hardware on for the first time resulting in a clean boot with zero errors
Booted to Win7 install, ended up with Error 0x80070570
Redownloaded the ISO, Remounted it on the flash drive
Attempted install, still errored
Repeatedly attempted the install sometimes resulting in a freeze of the installer but usually the same error message
Tried installing on my other SSD
Cleaned and reseated RAM and Slots
Did a secure wipe of both SSDs and retried install on both
Attempted install with the ISO burned on a DVD using low speed...same error
Tried reburning multiple times with the same error each time
Ran 5 passes of memtest on both ram sticks in all possible configurations. 0 errors

After all of these steps I still cannot complete an installation. The install errors out at different points of the "expanding" step each time.

Finally in a spate of desperation I tried using the same media (2 DVD attempts, 1 USB, and then just the ISO directly downloaded from microsoft to the system) to install windows via Parallels on my Macbook Pro...It still errored! Does this mean that the file on Microsoft's site is corrupt...? What on earth should I do at this point?

RELEVANCY SCORE 200
Preferred Solution: Corrupt Win7 installer? Error 0x80070570

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Corrupt Win7 installer? Error 0x80070570

There should be a MD5 checksum (or similar) on the MS site that you can use to check the download to make sure it's okay.

Do you have an old SATA or ISE drive you try in this computer, see if that works?
Also, check your BIOS Setup, make sure it's not setup for RAID, make it AHCI if possible.

Read other 4 answers
RELEVANCY SCORE 72

I'm trying to install windows 7 on my asus p4p800se 3.2ghz, 3.0gb pc3200/400 ddr ram...no matter clean install or upgrade options when files extracting at 20% usually i get this error (0x80070570) i can install winxp home no issues, no worries, stable works fine same settings/setup...i'm ready to keep winxp if i cant figure out a solution. maybe someone has similar issue that was resolved...thanks!

Read other answers
RELEVANCY SCORE 72

Hi,

I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails.
Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either!
This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
Anyone managed to resolve this problem?
BTW, I am installing x64 versions...
Thanks

A:Win7 install error 0x80070570

  
Quote: Originally Posted by Dubya


Hi,

I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails.
Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either!
This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
Anyone managed to resolve this problem?
BTW, I am installing x64 versions...
Thanks


Make sure you take your computer CPU and memory overclocks back to original specs. I can install by x86 without any problems but always have to take off my overclocks when I install or upgrade my x64 versions.

Read other 9 answers
RELEVANCY SCORE 71.2

File downloaded form a secure place, burned at 1x speed. Downloaded the file 5-6 times burned 10 or so discs.

CRC errors possible hardware config, RAID?

SEE here: http://forums.techguy.org/hardware/806033-crc-all-exe-zip-rar.html
 

A:Solved: Win7 install error 0x80070570

Read other 9 answers
RELEVANCY SCORE 61.2

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 293183 MB, Free - 225399 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: avast! Antivirus, Updated and Enabled
installer archive corrupt error 42145, what can I do?
 

A:installer archive corrupt error 42145

Read other 6 answers
RELEVANCY SCORE 59.2

So i bought a sick new gaming rig that arrived yesterday;i5 6600k
ASUS strix GTX980
MSI Krait gaming z170
samsung evo 250gb SSD
WD Blue 1TB
16GB DDR4 2400mhz

So, like the title states i just cant get this thing to work. I'm trying to do a fresh install of win7 ultimate x64.

So far i have burned multitude of ISO images to a USB drive, patched all of them with the USB 3.0 drivers, i also did a "UEFI specific bootable usb stick" given my bios is UEFI. No dice there. I then did a multitude of voodoo tricks i found online, includin ripping off my RAM sticks and checking then /w memtest, using all sorts of cmd prompt commands to mess with the drives, and switch the USB stick. Nothing worked.

Also if it's helpful i was initially stuck with the "no drivers found " part where windows did't recognize my usb, but i fixed that with the intel usb 3 patcher.

Also, my windows repair thingy says something about my bootloader, but fails to repair it.

UPDATE 1: Tried to boot with only 1 stick of RAM, didn't work.

After jumping trough multiple hoops, this error here is the last thing that stands in the way of my hapiness.
I hope someone finds a reason for this, thanks in advance!

Read other answers
RELEVANCY SCORE 58.8

I've had this problem for as long as I can remember, not sure why it's happening, but I've been unable to install certain programs(mostly games) because of a windows installer error message. I've gone to lengths to try and repair it using the Microsoft Fix-it, and other methods, but all of them don't work.

I saw a previous thread with the same problem, but it was more easily solved. I believe mine is much more complex, as I've tried that solution, and it doesn't work.

Open cmd, SFC /SCANNOW. I've included the logs, and as you can see, lots of corrupted files =[

A:[Win7] Windows Installer Error

Hey Bojango,

Do you keep your updates regular and antivirus running?

There can be many reasons why your files are corrupted missing including but not limited to; malicious software, Bad install, accidental alteration or deletion and much more..

Has this always been an Issue if so its very possible you installed the OS in a corrupted state. ether way Windows being a very restricted operating system in terms of alterations possible your best bet is to do a fresh install.

I will be happy to help you with any questions you may have in relation to backing up pre-existing files and installing a new Operating system.

Best Wishes

Read other 2 answers
RELEVANCY SCORE 58

I'm at my wits end here and I have no idea what to do next. I like to think of myself as someone who can solve most computer related problems but this has me stumped. I've browsed through the forums and tried all the solutions I can find [which I'll mention shortly] but it has all been to no avail.

In short the story is I had a decent system running on an asrock mobo and the mobo failed. So i bought the asus board to replace it and instead of doing a repair I wanted to run a clean install. It's been nothing but headaches since.

Specs:
Asus P7P55D-E Pro [using Marvell 9123 Sata3 controller] with i5 760
128GB Plextor Sata3 SSD
8GB Mushkin blackline ddr3 [currently at 1333MHz]
Windows 7 Ultimate x64 on a kingston 8GB usb key

What I've tried:
-Completely wiping the SSD with killdisk
-installing on an unallocated partition
-partitioning the drive then installing
-putting the SSD in each of the two marvell ports
-AHCI mode and IDE mode
-rebuilding the install file on the USB key [twice; once manually and once using the win7 USB DVD download tool] [I unfortunately no longer have my physical CD... though I can still find my Vista CD, not that it does me any good]
-putting the SSD in the intel SATA2 port
-installing the marvell drivers first [I've tried 3 drivers: Marvell 9123-9120_V1001042 from asus website; Marvell 9123-9120_V1001032 from mobo driver cd; marvell_9xxx_1.2.0.1019 from marvell website]
-installing with 2GB ram... 4GB ram... and the full 8GB ram
-plugging the USB key... Read more

A:0x80070570 on install of Win7 x64 on Plextor SSD Asus P7P55D-E Pro

So I'm an idiot sometimes... And I forget about the simple solutions. I didn't mention that I had 2 HDDs plugged into the SATA2 ports... frankly I forgot about them myself.

When I was looking at my mobo I noticed them again. I unplugged them. I ran the install again. It worked flawlessly. It just goes to show...

Read other 1 answers
RELEVANCY SCORE 57.2

I'm trying to do a clean installation of Windows 7 x86 on my Dell Inspiron 1525 laptop that I bought in July 2008. It's been running Windows Vista 32-bit without any trouble. Yesterday I purchased the Windows 7 Professional 32-bit upgrade from Digital River and downloaded the ISO. I've burned it onto two separate DVDs using different software and a different computer each time (the second time I used Alcohol 120% and made sure that it was on the slowest setting). Now I'm downloading the iso again.
Each time I try to install it (which has been many times, now, trying different configurations of partitions, etc) I get the error message "Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"

I've read through just about every thread I could find on this site and others and nothing seems to help. The only thing I haven't done is mess with the RAM, but I'd prefer not to do that as I don't have any experience opening up laptops (although I have built three desktops).

Anyone have any ideas/suggestions?

Thanks

A:Clean install Win7 on Dell Inspiron 1525: 0x80070570

Try Google. I found these two:

When you see the error "0x80070570 can't access files" on install click --> Cancel ---> you will be returned to the "Install Now" startup screen and - WITHOUT REBOOTING - just re-start the install.

you should type crc checksum into a search engine and download a program that allows you to check if the contents on the disk is the same as the iso file.

Read other 7 answers
RELEVANCY SCORE 57.2

I was doing an Avast scan and this came up. I then googled the search and saw a reply on this site. I did the first step and wanted to know if anyone could help me get rid of this trojan?

This was my BAC result after following the instructions
Find AWF report by noahdfear ?2006
Version 1.40

The current date is: Sat 08/23/2008
The current time is: 7:53:18.50
bak folders found
~~~~~~~~~~~

Duplicate files of bak directory contents
~~~~~~~~~~~~~~~~~~~~~~~

end of report

I would appreciate any help possible.

A:Avast Virus Scanner: Window\rcdsetup.exe\%sys%\ocxsetup.ws4 Error:unable To Scan Installer Archive Is Corrupt.

Is there any thing to help this?

Read other 12 answers
RELEVANCY SCORE 56.8

Hi everyone,
I just bought an Electronic download verison of Windows 7 Professional from http://www.itsnotcheating.com.au to upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:

STOP: C000021a [Fatal System Error}

The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)

It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish. I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.

I have posted another article regarding this on Microsoft Answers and was advised that I have corrupt install files by the MVP Moderator.
I have re-downloaded the installer again and tried again with the same result. I have been trying to work this out for the last 5 days. I hav... Read more

A:Win7 Installer fails with BSOD & error code: STOP: ...

Out of curiosity, what do you have your ram voltage (vdimm) set at in your mobo bios?

And do you know the exact brand and model number of your memory?

That error could be in relation to DVD drive. Try creating a USB install key and install from that while the DVD drive is not connected. If it installs, play with it for a day or so to test.
USB Windows 7 Installation Key Drive - Create

Also if you want highest chance of install success, you might want to also remove 3 of those ram sticks and go with only 1GB. You can replace them after you're satisfied the install went right and stable.

Read other 9 answers
RELEVANCY SCORE 52.8

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

Read other answers
RELEVANCY SCORE 52.8

First timer here, so please bear with me. Any help you can offer is MUCH appreciated!

Some of the files on my SD card have changed file extensions and appear corrupted (the modified dates are wonky and the file sizes are off). For example, a file that was formerly IMG_3324.JPG is now MG_3324J.PG, and I can't open, copy, or rename the file. When I try, I receive Error 0x80070570: The file or directory is corrupted and unreadable.

I have gone into Properties>Tools>Check. I receive the following: "We found errors on this drive. To prevent data loss, repair this drive now." However, when I click Repair Drive, I just receive the error, "There was a problem scanning and repairing this drive..."

Most of the files on the SD card are readable and work just fine. I was able to copy them to another location; however, there are about 60 or so corrupted files that I would like to repair (I don't want to lose the pictures!).

Also, any ideas what causes these errors? I want to make sure I don't repeat this in the future :-/

I'm running Windows 10, and the SD card is a Dane-Elec Proline 4GB card.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, Intel64 Family 6 Model 78 Stepping 3
Processor Count: 4
RAM: 8084 Mb
Graphics Card: Intel(R) HD Graphics 520, 1024 Mb
Hard Drives: C: 237 GB (154 GB Free);
Motherboard: ASUSTeK COMPUTER INC., K501... Read more

Read other answers
RELEVANCY SCORE 52.4

Hello,
I keep getting this error when I try to create or delete a folder. I also cannot use applications which create temporary folder such as WinRAR.
The error says this:
"An unexpected error is keeping you from creating the folder. If you continue receive this error, you can use the error code to search for help with this problem.
Error 0x80070570: The file or directory is corrupted and unreadable."
I tried all the possible options to solve this problem except for reinstalling the Windows.
Please help!

A:Error 0x80070570

I looked that up- It's an old error - From Vista days. Does this happen with WinRAR from every folder? It sounds like a permissions thing, but I would not mess with folder permissions in Windows 8 unless I had to. But you can make a "downloads" folder, and set the permissions to "Administrators" for that and see if it still happens. From there we can figure out were to go.

You can also try "unlocker" - You can get it at Major Geeks. It detects as a virus in some AV but it is safe. It has to take ownership of the object you use it on, sometimes AV apps detect that ability as a virus.

I dug around more, and it seems like this is a common problem when INSTALLING Windows 7 (And Probably Windows 8 as well as it uses some of the same installation steps).

The best I can find, is that you have some kind of Install process that never completed right, and it's still running, locking out access to the drive. That just from the bits and pieces of the discussions I found. There is no MS Technet discussion of it. Microsoft like to name and number these errors, just to identify that there have been 80,070,570 (80 MILLION) kinds of Windows Errors. They assign a 0x800... number but never tell you what the frell it MEANS.

Read other 1 answers
RELEVANCY SCORE 52.4

Aaaargh! I successfully installed the 32-bit windows 7 on my computer, upgrading it from windows XP. I spent an hour realizing how awesome the new OS is before deciding i needed to reformat to be sure i was rid of all spyware/malware. After trying to do the clean install, I keep getting the "Windows cannot install required files" error right when the install starts "expanding". It goes to 1% and then stops. I am installing this from an ISO off of a 4GB flash drive.
Here's what I have tried so far:
Redownloading and rewritting the flash drive (several times)
Updating the BIOS drivers
Restarting the installation without a reboot
Running chkdsk on the flash drive

None of these things have worked for me. I know that it has been suggested to set the hard drive (i think..) to SATA or AHCI, but this goes right over my head. Any help would be great

Is there anything else to try?

A:Error 0x80070570 Please help!

I had a problem like yours on a Dell. I had to flash the BIOS to get it to load Windows 7. I don't know if that applies to your problem but it is worth a shot.

Read other 9 answers
RELEVANCY SCORE 52.4

Hello,

Im currently running Windows XP Home Edition 32-Bit and I just downloaded Windows 7 Professional Upgrade 64-bit. I downloaded the ISO from Digital River which was part of the ultimate steal for students. Then I downloaded the Windows 7 DVD/USB Download Tool and made a bootable usb drive with the ISO on it. I booted from the USB drive and the first part went fine. I chose install now then custom install and then installed it on the drive partition containing XP. It got to about 54% on "unloading files" before it gave me an error 0x80070570. It said the media was corrupted or something and said to make sure all the installation files were there and then restart again. So I tried again, no cigar. I dont really know what to do now!

As im typing this im re-copying the ISO onto the USB Drive a 2nd time to see if it will work now.

Thanks for any help

A:0x80070570 Error

Hi Solidsteel,

You are on the right track, by recopying across the installation media.
Here are some other avenues to look into should your fix not work. If it's possible, run check disk on both your Windows install drive and your usb drive. Also de-fragment both if you can. The error you mentioned is due to corrupt files; but at this early stage (without digging deeper) we don't know where the corruption is. i.e. It could be:Your win 7 install files might be corrupt (this you are now looking into by recreating the installation media)
Your usb drive may have a corrupt partition (run chkdsk /R /X from an elevated command prompt to fix)
The usb drive could be failing
Your Operating system hard drive could have a corrupt partition (chkdsk /R /X), or could be failing
Either drive may be too fragmented for windows to access the files quick enough

Also, can you please confirm if you ran the windows 7 upgrade advisor prior to installing windows 7?

Read other 7 answers
RELEVANCY SCORE 52.4

hi all i have been getting a error message when transferring files to a flash drive the transfer get almost done and then 0x80070570 error can any on help thanks

A:error 0x80070570

Try:
http://windows.microsoft.com/en-US/w...sked-questions

Read other 2 answers
RELEVANCY SCORE 52.4

Hi this is my first post

I have been usuing bitcommet to download some tv swhows and a few movies on my pc. things have always been fine...after i download them i transfer them over to a nexstar external hard drive. recently tho i have been getting an error when transfering files
The error is:

An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

error 0x80070570: The file or directory is corrupted and unreadable

Is there a simple way to fix this? I am not really good at working with computer but i follow direction well.
Thank you to all the people that take the time to read this and thank you for any help i may receive

A:Error 0x80070570:

Have a read here: http://forums.techguy.org/windows-vista/75...0x80070570.html

Read other 1 answers
RELEVANCY SCORE 52.4

I get 0x80070570 error when setup is unpacking


I have read something about it and found some things that can be solutions:No USB plugged in (just tested - doesn't work)
No recovery partition (not tested, going to test)
2 GB memory instead of 3 GB
For the latest point I don't know if it will work, because I have 1GB+2GB memory and not 3x1GB. Does it work with 1x2GB?
I'm running clean install from upgrade dvd.

Does anyone have other solutions to this problem?
And do the points mentioned above work?

A:0x80070570 error ... :(

Yes, removing RAM sometimes works. Remove the 1GB stick and see if you can install. If not, move the 2GB to another slot and try again.

Read other 9 answers
RELEVANCY SCORE 52.4

I am using a Intel Core Processor with Windows 7 with a business server. When I am attempting to copy a video (file extention .dvr) from a Micro SD card I recevie the following error:

"An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:
Error 0x80070570: The file or directory is corrupted and unreadable"

This video file is very important and I need to be able to view and save on my computer. If anyone has any idea how to view this file or fix the problem it would be greatly appreciated.

Thank you in advance for your help.
 

A:error: 0x80070570

Read other 7 answers
RELEVANCY SCORE 52.4

Hello there..
How r U all? hope all the smart people are still on =P
I have been transferring pictues from my computer to my flash so far so good until I got an Unexpected Error 0x80070570 for more than 20 pictures.
What's going on?
Any reply would be highly appreciated
Thanks!

A:Error 0x80070570

Try reformatting your media card to FAT32. Lemme know...

Read other 5 answers
RELEVANCY SCORE 52.4

I'm trying to move music onto my micro SD 32gb card but an error msg keeps coming up of 0x80070570 and only xfers 29 of my 3021 songs.

Pls help
 

A:error 0x80070570

Move or copy? Try moving (or copying) smaller groups of files, maybe 3 or 4 folders at a time. This will give you a better insight as to whether a certain file is causing the error (ie. corrupted file), or if it's the micro card, with a bad spot or something on it (although this is very rare on an SD card).
 

Read other 1 answers
RELEVANCY SCORE 52.4

O.k. I have been trying to work through this for 2 weeks.
New HP7900 DC. No cards, only whats on the board. COre 2 Duo E8400 at 3GHz. Using 2mb stick in channel 1 only. Memtest x86 checks out fine. DVD and SATA HDD set to IDE. Digital river ISO's burned at 1x speed. USB drive failed. Created multiple USB's with the Microsoft USB burner on 64 bit machine as well. Installed 32 bit and downloaded MS Upgrade tool. Shows hardware is 64 bit capable. Not sure what else to do. Is there a preferred ISO that seems to work best? Halts at 27% Also tried the start on DVD switch to USB and the restart trick to no avail. I'm about ready to just say the heck with it and keep the 32 bit that came with the machine. Oh, I also reformatted the HDD.

Am I missing anything?

A:Another 64 it 0x80070570 error

Hi,

This sounds like a bad 64 bit ISO. Download a fresh copy from here and burn it to a 4GB USB2 stick using this.

Let us know how you get on.

Regards,
Golden

Read other 1 answers
RELEVANCY SCORE 52.4

I've had this flash drive for about a year and a half or something like that, and when I go to open a specific folder on it, a message comes up that says, "The file or directory is corrupted and unreadable. Error 0x80070570." I am able to open any other file fine except this one. Is there anyway to fix it?
 

A:Error 0x80070570

What operating system do you have? Windows 7?
 

Read other 3 answers
RELEVANCY SCORE 52.4

hi. I have 3 possibly related issues.

1- Recently I've had multiple cursor/arrow freezes after I close my laptop and reopen it. This requires me to go into Task Manager, close everything down and reboot.

2- I'm still use a hard drive based email (Eudora) and have large files . When I rebooted for a cursor freeze last night, I got this error "could not open the file c:\Eudora\in.mbx for writing. Cause: The request contains an invalid argument (22).? Every so often my mailboxes get too large and I have problems, and in the past I was able to create a new inbox.

3- When I tried to rename the inbox or cut and paste it elsewhere so as to create a new one, I got this message "An unexpected error is keeping you from renaming the file" and "Error 0x80070570: The file or directory is corrupted and unreadable."

I've ran System Mechanic several times and have had no issues other than these for the 2 years I've had my X1 carbon, running Windows 7.

Thanks.

A:Error 0x80070570

I'd run a chkdsk /r from the command line and see what comes up...sounds like a corrupted file. You do have backups of your data, right? If not, back up what you can before you start tinkering.

Read other 18 answers
RELEVANCY SCORE 52

Hi everyone. First post here because I?m getting really frustrated with this error message. Error code: 0x80070570. I?ve tried searching around on the internet for a fix but I?m not coming up with a lot that pertains to my situation. I am clean installing a copy of Windows 7 professional x86 on an HP DV6700 laptop. This is an actual release copy obtained through Microsoft store front download. Everything works great when booting from the DVD until it starts expanding files. It has gotten as far as 49% before giving the error. Always seems to be a random number, I?ve tried probably 4 times.
I am positive that the disc is not corrupt because I installed Windows 7 without any problems using the same disc on my desktop. I have deleted every partition on the HP except for the recovery partition it comes preinstalled with. My next option is to delete this too but I would rather not. Anyone have any ideas how to fix this issue?
I also have another semi-related issue that I would love input on if anyone has any idea. After Windows 7 was unsuccessful I attempted to recover Windows Vista using the recovery partition. Everything installed fine until it tried to reboot. Now I get an error message ?Missing boot manager? and only an option to restart the computer. I?m afraid this is going to happen even if I get windows 7 to install so any help would be greatly appreciated. Thanks!

A:Install error 0x80070570

Hello rjw24. Welcome to sevenforums.

Please inter your system spec`s. you will fin it at the left hand side bottom of your post.

0x80070570 error code means that a file or a dir is corrupted.

Have you ever installed window 7 in this computer before??
If yes, format the 100mb partition before reinstalling windows 7.

Read other 9 answers
RELEVANCY SCORE 52

Hello,

I recently built a rig (spec below) and originally installed windows 7.

I decided today I would install windows 8.1 as I get it for free from my university. I booted the installation disc in EFI mode, wiped the SSD and deleted all partitions. I let windows create the partitions it needs and proceeded to install.
The installation got up to 2% in expanding windows files and showed error:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code: 0x800070570.

I rebooted and tried again several times and the same thing happened whether I chose EFI cd boot or not.

I then reinstalled windows 7 without any issues, and downloaded an 8.1 pro disc image from mydigitallife. The installation got a little further into expanding windows files, but the same error came up again.

Ive been reading that it may be a memory issue so i'm the process of reinstalling windows 7 and running memtest86+, but I doubt this is the case as its a mew system and windows 7 has no trouble

If anyone can shed any more light on why I am having this problem I would be much appreciated

Regards.

System Spec:
Mobo: Asus P8 Z77-V LX2
CPU: Intel i7 2600k (no overclock)
RAM: Crucial 8GB DDR3 1600mhz (one module)
GPU: GeForce 650Ti

A:Error 0x80070570 during installation

See if this helps: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

Read other 3 answers
RELEVANCY SCORE 52

I am currently on Windows 7 and am trying to upgrade to Windows 10 before the window closes.  I am receiving numerous errors that seem to be changing.  The current error is 0x80070570.

A:Error 0x80070570 updating Win 10

I recommend you to use the Windows 10 Media Creation Tool for upgrading.
Download the tool and use the ISO file.
https://www.microsoft.com/en-us/software-download/windows10?wa=wsignin1.0
If you don't want to do that you can run the System File Checker tool.
Start --> Run --> cmd and press the Enter button.
Type sfc /scannow
Then try to perform the upgrade process again.

Read other 3 answers
RELEVANCY SCORE 52

I am on an Inspiron 1525 with Windows Vista. I've had it for about a month and it hasnt given me any problems. But for the last couple days my computer has not been letting me move, copy, paste, or delete files.
When I to do any of these things this message popup appears:

"An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:
Error 0x80070570: The file or directory is corrupted and unreadable"

Does anyone know how to fix this problem? Preferably a step by step process, if there is one?? Thanks to anyone who has any input.

 

A:Solved: Error 0x80070570

Try doing a virus scan, it's probably a virus.
 

Read other 3 answers
RELEVANCY SCORE 52

Get this error code 0x80070570
cant remove any programs or files
Windows 8.1
HP PC

Read other answers
RELEVANCY SCORE 52

first of all sorry for my bad English..

I have downloaded windows8 developerPreview-32bit-English (2.8 GB) successfully..
made a bootable USB and tried to install (fresh install).
when it comes to expanding files at 57% it gave error code:0x80070570 and tried again.
same error..
tried to install on VMWare, Virtual Box directly with ISO..
same error.
on the other system with different configuration..
and again same error..

so, i searched on google. only the solution there may be problem with ISO is to re-download ISO..
but my net speed is very very low (download sppeds upto 12 kbps).
i downloaded it 2.8 with great difficulties.. (took 5 days to download.)

i can't download it again..

is there any alternate solution like rebuilding the ISO with working files.
is it possible to know which files of ISO are corrupted and replace them with working files..

pls help...

A:error code : 0x80070570

Sorry, but your best bet is to redownload. good luck.

Read other 5 answers
RELEVANCY SCORE 52

Been getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install before it errors out and then restarting, all without luck. Anybody have any other ideas? Using a Maximus IV Extreme Z, no overclock.

A:Win 7 0x80070570 install error

Use 2gb of RAM for install. Test your RAM using memtest86 for 5-6 passes or overnight. Then when known good, test good stick in all slots to test slots: RAM - Test with Memtest86+

Where did you get the ISO? Try slow burning DVD at 4x speed with ImgBurn once you confirm the ISO hash against official Win7 HASH: Windows 7 RTM SHA-1 hash - checksums.
Win7 SP1 hashes are on TechNet Download page under details for each download and accessible even if not subscriber.

Next try writing ISO to flash using this simple tool with Win7 in dropdown: Universal USB Installer – Easy as 1 2 3 | USB Pen Drive Linux

Next check for BIOS update for mobo. If none, reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS.
While in BIOS setup set SATA controller to AHCI to try install.

Next try wiping the HD for possible boot corruption: SSD - HDD Optimize for Windows Reinstallation

As a last resort, move HD to another computer to install. SysPrep install before moving back to problem computer: SysPrep to move HD to another computer

Read other 9 answers
RELEVANCY SCORE 52

Hello everyone, kind of new here but I am basically DESPERATE for help!When installing windows 7 Home Edition 64bit, my computer finishes the "Copying Windows files" in 1 second, and then goes off to the "Expanding Windows files" part. Once it is at 50%(every time), my computer says an error code and a message about corrupt files ect(Error code: 0x80070570). I have been struggling after trying to format my desktop for a clean install of Windows 7 Home Edition 64bit. Truly I have searched for solutions everywhere through these forums including the following:removing RAM(bad memory), changing modes from SATA to AHCI, cancelling the install and without rebooting restart the install, and putting down the graphics to 640x480. It has been quite a pain and ruined my weekend and I was hoping that someone else could propose a new solution since nothing has worked. Instead of using a cd, I am using a USB(changing boot priority in the bios to USB, changing the USB to NTFS format ect...), since I currently do not have a SATA CD reader. Any new suggestions would be great, Thanks! P.S: The specs of my computer if needed will be posted below: Intel Core i3 [email protected] eVGA P55v SLI 2x2GB OCZ Platinum DDR3-1600 9-9-9-24 1.35V Dual Channel Palit Sonic GTX 260 Western Digital Caviar Black 500GB 7200RPM 32MB Dual Proc SATA BIOS v02.67 If anyone needs more info please just inform me of what to add

A:Common Error(0x80070570) Help!

  
Quote: Originally Posted by ZeroGravity


Hello everyone, kind of new here but I am basically DESPERATE for help!When installing windows 7 Home Edition 64bit, my computer finishes the "Copying Windows files" in 1 second, and then goes off to the "Expanding Windows files" part. Once it is at 50%(every time), my computer says an error code and a message about corrupt files ect(Error code: 0x80070570). I have been struggling after trying to format my desktop for a clean install of Windows 7 Home Edition 64bit. Truly I have searched for solutions everywhere through these forums including the following:removing RAM(bad memory), changing modes from SATA to AHCI, cancelling the install and without rebooting restart the install, and putting down the graphics to 640x480. It has been quite a pain and ruined my weekend and I was hoping that someone else could propose a new solution since nothing has worked. Instead of using a cd, I am using a USB(changing boot priority in the bios to USB, changing the USB to NTFS format ect...), since I currently do not have a SATA CD reader. Any new suggestions would be great, Thanks! P.S: The specs of my computer if needed will be posted below: Intel Core i3 [email protected] eVGA P55v SLI 2x2GB OCZ Platinum DDR3-1600 9-9-9-24 1.35V Dual Channel Palit Sonic GTX 260 Western Digital Caviar Black 500GB 7200RPM 32MB Dual Proc SATA BIOS v02.67 If anyone needs more info please just inform me of what to add
... Read more

Read other 1 answers
RELEVANCY SCORE 52

Trying to install Windows 7 Pro and I keep getting the error code 0x80070570.
I have tried everything from removing ram, clearing BIOS, jumper configs, re-downloading the software, slow burn...etc...
Can someone help me please

A:How do I fix 0x80070570 error code??

Fill in your computer specs. Since it's a custom build, include the motherboard make and model.

Read other 5 answers
RELEVANCY SCORE 52

i Had a 32bit systeem but i upgraded my pc went from no graphic
card to a 2GB,
and went from 2GB Ram to 4GB.. but i decided to change my 32bit to an
64bit..

and there is where the problem begun..

i started the installation and right by 81% he gave me the F'ing error!
so i restarted and tried it again.. but again with the same error!

i tried multiple CD's and made BOOT USB but nothing is makin a difference..
then i finally succeeded! but
once i had al my drivers installed it started to give me blue screens..

i didnt know what this was until i searched the whole web and it said
it maybe the cause of bad software..
so im back at it again reinstalling my software Windows 7..i even tried
8, but i dont like that one so i wanted to install 7 again but I CANT FIGURE OUT WHAT TO DO !

i unplucked dvi cable took out my graphic card..changed ram just like
all the other forums said..but nothing is working for me!

so now im here and need help! can somebody please help me get my systeem
back in functional mode!

cause im really tired of trying bout to throw this shit out the window!

i got a DDR2 Systeem.. Asus P5KPL-AM

THNKYOU

A:SETUP error 0x80070570 Tried almost everything HELP

Hi Mike,
Will the error message be the same everytime? Are the failed installation media from the same resources?
For the error 0x80070570, I found it may be related to the BIOS settings. We can try to reset the BIOS to have a check. Apart from this, we can unplug the add-ed RAM to have a troubleshoot considering this is the only change we have made.
Here are similar issues for reference:
windows 7 error code 0x80070570 during install(Pay attention to robmelb`s,Dirk Gently`s,Joseph M. Conde`s reply)
https://social.technet.microsoft.com/Forums/windows/en-US/b2058551-c929-4a12-99eb-f9ae2966a5d1/windows-7-error-code-0x80070570-during-install
Windows 7: Windows cannot install required files. Error code: 0x80070570(Pay attention to JasonH83`s suggestion)
http://www.sevenforums.com/installation-setup/308580-windows-cannot-install-required-files-error-code-0x80070570.html
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards

Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 5 answers
RELEVANCY SCORE 52

Hi Experts,

I have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,
i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message.

Error : 0x80070570 The file or Directory is corrupted and unreadable.

Kindly let me know how to delete or move these files.

Thanks in advance.

A:0x80070570 error says cant copy

You could start by running the Disk Check utility on the drive:

Start > Computer > select (highlight) the drive > right click & Properties > Tools Tab > Error Checking > Check Now > Check "Automattically Fix File System Errors" > Start.

You could also check "Scan and Attempt Recovery of Bad Sectors", but this will take much longer, especially on an external drive.

Most times I run the standard scan and then if it finds errors I run it with all options checked. But in your case you might just "cut to the chase" as they say.

Read other 1 answers
RELEVANCY SCORE 52

I am getting the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have Windows 7 Pro OEM 32bit. I have the requirements it takes to put Windows 7 on a computer. I have tried two different discs same results. System is custom built, with Gigabit GA-H55M-S2H motherboar, Intel core i3, 4gb Memory, 500gb hdd. It gets past the part of coping files and then comes up with the Error code of 0X80070570. I have tried to install several times using two different discs and allways the same result.
 

A:Error 0X80070570 in WIN 7 Pro Install

Read other 7 answers
RELEVANCY SCORE 52

I tried to update my son's laptop with the latest "Cumulative Update for Windows 10 Version 1607 (KB3213986)", but after downloading the update I got : Error code: (0x80070570). The same thing happened with the December Cumulative Update and I thought that Microsoft would fix this in the January update? Apparently not. At all other computers at home there was no problem with the update. Any solutions?
 

Read other answers
RELEVANCY SCORE 52

Hello everybody, I have already read lot's of 0x80070570 threads and I think my case is sort of different here. I'm using a ASUS P5VD1-X motherboard, Pentium 4 3GHz, 1Gb RAM, Geforce 7600 GS. I had success on installing Windows 7 first, but I had to format the computer short after because of a virus that disabled any antivirus and firewall. Then, when I formatted the computer and tried to install Windows 7, i just have this error 0x80070570 at 4% of Expanding data. The problem is not in the DVD, as i had it installed a short time before. I can't understand why can't I install it now! I tried disabling all USB ports but it didn't work. I do not understand a lot about hardware but I can find things out with a little time. Hope someone can help, thanks a lot.

A:error 0x80070570, i don't understand

so are you unable too boot to disk now? Do you have the option to "format" again?
were you using multiple partitions?

Read other 9 answers
RELEVANCY SCORE 52

i Had a 32bit systeem but i upgraded my pc went from no graphic card to a 2GB,
and went from 2GB Ram to 4GB.. but i decided to change my 32bit to an 64bit..

and there is where the problem begun..

i started the installation and right by 81% he gave me the F'ing error!
so i restarted and tried it again.. but again with the same error!

i tried multiple CD's and made BOOT USB but nothing is makin a difference..
then i finally succeeded! but once i had al my drivers installed it started to give me blue screens..

i didnt know what this was until i searched the whole web and it said it maybe the cause of bad software..
so im back at it again reinstalling my software Windows 7..i even tried 8, but i dont like that one so i wanted to install 7 again but I CANT FIGURE OUT WHAT TO DO !

i unplucked dvi cable took out my graphic card..changed ram just like all the other forums said..but nothing is working for me!

so now im here and need help! can somebody please help me get my systeem back in functional mode!

cause im really tired of trying bout to throw this shit out the window!

i got a DDR2 Systeem.. Asus P5KPL-AM

THNKYOU!

A:SETUP error 0x80070570 Tried almost everything HELP

try this and come back.

Common Installation Problems and Their Solutions

Read other 2 answers
RELEVANCY SCORE 51.2

Hello,

I am trying to install Windows 7 on my ASUS laptop. I tried different types of harddisks but it still does not work. Also I did a memtest.

I am booting the intallation from a usb disk.

Here a picture of the error:

http://oi59.tinypic.com/710a5d.jpg

Thanks in advance!

A:Error installing Windows 7 - error: 0x80070570

How was the USB stick prepared? For Legacy BIOS use Windows 7 USB-DVD Download Tool
but for UEFI BIOS' you must use Option One from UEFI Bootable USB Flash Drive - Create in Windows and then boot the stick as a UEFI device.

Otherwise follow these steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 51.2

Hi,
I've just bought an Asus X201E. I got the linux version, because as a student I get a free MSDN copy of any Windows OS... Long story short, I've been trying both Windows 8 32/64bit and Win 7 32 bit, all of them dosplaying an error during unpacking system files in the installation process @32-42%. I've tried everything, switching the SATA mode to IDE, rebooting, switching flash drives, etc. Since there are X201E models being sold with Windows 8 I figured there would be no problem installing it? Help please, it's really driving me mad..

A:Can't install Windows 7/8, error 0x80070570

Welcome to EightForums.

All Linux code must be deleted using the CLEAN ALL command.As you have had linux on the HD you need do a Clean all & full format.

Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 51.2

I tried installing Windows 7 64bit on my new build (new HDD) everything was going as expected, but when it got to about 10% "expanding files" I got the error msg in title. When I clicked "ok" it took me back to the "Intall Now" screen where I figured I'd click that again (no reboot) and went through the steps until I got to the "Where do you want to install windows?" part. However, it now shows to locations instead of just one.

Disk 0 Parition 1 System Reserved 100MB total 86MB free System
Disk 0 Partiion 2 596.1MB total 594.1 free Primary

Where do I go from here? BTW, it is the Full Retail version I just bought!

MB Asus P7P55D-E Pro
Intel i5 760

So much for my Saturday gaming fun:(

A:windows 7 install error 0x80070570

Hi -

Wipe the HDD completely with KillDisk -
- http://jcgriff2.com/0x1/killdisk_imgburn.html
- http://www.techsupportforum.com/2789807-post8.html

Try Windows 7 installation again.

Regards. . .

jcgriff2

`

Read other 4 answers
RELEVANCY SCORE 51.2

One day I just couldn't delete or move most files off of my computer. At first I thought it was just files on my desktop, but I found out tonight its also files in my documents folder. And its not all files, just some....

I get this message:

***********************************************
An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

Error 0x80070570: The file or directory is corrupted and unreadable
***********************************************

I tried searching through many forums and this error code is also associated with some kind of DVD error or backup error...none of which applies to me. I simply want to put a word document, powerpoint document, JPEG into the trash.

In the replies to the DVD error or backup error people were talking about ownership blah blah blah....if the solution to this problem also requires some kind of ownership deal....would you mind explaining things step by step? I have no idea what that means.

Thanks!
 

A:Cannot delete files - Error 0x80070570

Have you tried downloading something like "Eraser"

http://www.heidi.ie/eraser/

to see whether that works?

Penny
 

Read other 1 answers
RELEVANCY SCORE 51.2

Trying to upgrade and keep getting unsuccessful with error 0x80070570. Help

Read other answers
RELEVANCY SCORE 51.2

I get the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have windows Vista Home edition and I am trying to install either Windows 7 Home premium. I have the requirements it takes to put windows 7 on a computer. You can post on this thread to help me or if you need to email me for some reason it is [email protected]
 

A:error code 0x80070570 When installing win 7

Read other 6 answers