Over 1 million tech questions and answers.

advanced port replicator III plus (toshiba)

Q: advanced port replicator III plus (toshiba)

hi all!

just wondering and hoping if you could help me.

I have been using a toshiba tecra with the advanced port replicator III plus. using dual monitor (simply plugging a normal CRT monitor into the VGA port on the docking station. its been working great but over the weekend it has just stopped working. if i connect it directly into the vga port on my laptop it works fine however in the port replicator it just wont come on at all. the pins are all good.

the hardware came with no drivers so no idea how to reinstall them or update them.

any ideas on how i could fix this? i was thinking of bringing in a DVI to VGA adapter cuase it has that on the back. hmm

would apprecaite any help!

Cheers

Joel

Read other answers
RELEVANCY SCORE 200
Preferred Solution: advanced port replicator III plus (toshiba)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 92.4

Here is my situation,
I own a Lattitude E7450, and needed to connected two displays to it. I went ahead and bought the Dell E-Port Plus Advanced Port Replicator with USB 3.0, since it has 2 DVI ports on the back. It shows it is compatible with my laptop.
I set up my dock, connected my laptop, as well as both external monitors. Only one monitor shows a duplicated desktop. When I go into the display settings, I cannot see any existence of another external display being connected.
All of my drivers are up to date, restarted laptop many times. Pretty bummed out.
Anyone have any solution/knowledge to this?

Read other answers
RELEVANCY SCORE 92.4

I recently started using the E-Port Plus Advanced Port Replicator with my Latitude E7450, but the headphones are not working. Sound comes from the laptop itself, even when the headphones are plugged into the dock or laptop. The headphones work with other devices, and the laptop works with the headphones when it is not docked.

Read other answers
RELEVANCY SCORE 92.4

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

Read other answers
RELEVANCY SCORE 81.6

Hi,

I have tried to get a definitive answer by searching around but don't feel comfortable ordering a new monitor without know if its possible.

I want to buy the LG 38UC99 Monitor which supports 3840 x 1600 resolution and I'm willing to buy the replicator if it helps me achieve this resolution.
I have a Tecra A50-CPart number PS56DC-00F001It appears to have Intel HD Graphics 5500

I have read that the laptop alone will only drive 2048 x 1536, but I have read that the port replicator could provide more resolution.

Any help would be soooo much appreciated.

Thanks

Read other answers
RELEVANCY SCORE 62.4

I am trying to set up an external monitor (hp 22uh led) via the 3001pr usb 3.0 port replicator to my hp envy 15 x 360 laptop. I have downloaded all of the software and drivers but the devices don't seem to be recognized. Any suggestions - did I miss a step? The monitor is plugged in with VGA cable. Thanks in advance.

Read other answers
RELEVANCY SCORE 62.4

Hello,
I'm having a problem with a dell Inspiron laptop that seems to have a loose ac port. If I hold the plug in, it will boot and start up. As soon as I let go of the plug, it shuts off. I've read that a port replicator or docking station will take care of this problem. If I do that, will it be a work around or will I still have to take this thing apart and repair the broken port? If I still have to fix it, then I don't see any reason to buy a replicator.
Thanks in advance.
 

A:port replicator

Read other 6 answers
RELEVANCY SCORE 62.4

How to remove the port replicator?
 

A:port replicator

How about some real information about what you have and what you're trying to do?
 

Read other 1 answers
RELEVANCY SCORE 62.4

I am looking for a port replicator or docking system. I want to be able to plug my laptop into it and use my normal keyboard, monitor and mouse. It has to have dual video though. It will be a Dell inspiron latptop and Dell is no help in this case. Yes I know Dell sucks but it isn't for me it is for my boss. Any suggestions?
 

A:Looking for a port replicator

Dells do not suck. There are a great number of Dells with huge numbers of happy owners. Some of the cheap ones suck. And some with the wrong owners suck.
There are many port replicators, and many are sold on eBay and at Dell support sites.
But I would get my boss to buy a Dell that has a specific port replicator...
Or else I would learn how to burn my files to disk, or a backup external hard drive.
We need to know which Inspiron, age, operating system, memory, hard drive and such.
I would want to back up my data to an external hard drive, then tune up the existing install.
 

Read other 2 answers
RELEVANCY SCORE 62.4

Could it=s driver  not being present be responsible for Usb 3 flash drives not being recognioxed.  I have tried and tried to reinstall the driver but I continuosly get the errior uninstall in progress not complete restart the computer to complete but that never happens.  I have tracked down its oem inf and pratcially stalked it to get it out but to not avail.

Read other answers
RELEVANCY SCORE 61.6

So my laptop doesn't have a VGA input and I have a port replicator which does(hp port replicator). So I connected the monitor which only has vga to the port replicator and the port replicator is connected to my laptop but it says it cannot find a second monitor

Trying to do this because my laptop screens gone bad and won't be able to fix it for a while
 

Read other answers
RELEVANCY SCORE 61.6

Driver mismatch between the newer drivers available on the HP.com site and when you plug in the port replicator and the drivers on its drive letter. I did see a firmware upgrade on the HP.com that has been removed. How do I update the driver on the port replicator so they agree? Is there a firmware updated file for the port replicator (3001pr 3.0 USB port replicator)

Read other answers
RELEVANCY SCORE 61.6

hi  HP 3005pr USB 3.0 Port ReplicaPart Number: H1L08AA#ABU  is that product compatible with my laptop (hp envy dv6 7202se) ??  

A:HP 3005pr USB 3.0 Port Replicator

Hi, Yes it is. It uses USB 3.0 connection therefore it is compatible with nearly all laptops with USB 3.0 ports and also backward compatible nearly all laptops with USB 2.0 ports. Regards.

Read other 1 answers
RELEVANCY SCORE 61.6

I just purchased a port replicator and would like to understand how I can make my Monitor, Keyboard and mouse from my home desktop work with my work IBM Laptop.

It is my understanding that I can use this device so that I can view all information on my laptop on my desktop?

Am I correct and how do I make it work
 

A:IBM ThinkPad Port Replicator II

Read other 8 answers
RELEVANCY SCORE 61.6

Hi!Canīt find the software for HP 3005pr 3.0 Port Replicator from HP support.

Read other answers
RELEVANCY SCORE 61.6

I replace my old lenovo notebook running XP with a new HP G62 running W/7 home. When I installed the most current driver from the lenovo site I found that my port replicator (part # 40y8150) will not allow my extended monitor to display. I can't seem to find a driver for this replicator that is specifically for W/7 and when I called Lenovo they insisted on proof of purchase before they would even talk to me about it! Does anyone know of a work around?

Thanks
Dan
 

Read other answers
RELEVANCY SCORE 61.6

Hi, Why does hp usb 3.0 3005pr port replicator work with HP EliteBook 820 G3 Core i7 8GB 256GB SSD 12.5"`??? I plugged in the replicator to the laptop, started the laptop but get a black window saying Missing operating system.I unplugged the replicator, re-started the laptop, no black window, I log in as always and everything is fine.I plug in the replicator again, but the system doesn't recognize it.When viewing the list of devices and what's connected to the laptop, it says "Unknown device connected" but updating the driver doesn't help. I download the driver from hp.com but each time I restart the laptop I get the black window and "Missing operating system". When I finally manage to update the driver of the replicator, I get the following message:"Incompatible disply driver. The installed version of DisplyLink USB Graphics software does not support this graphics card, which uses a newer version of the Windows Display Driver Model. Please visit http://www.displaylink.com/software to check if a newer version is available." When I visit the site and download the newer version, I get blue screen. So, it seems to be impossible to install the replicator to this laptop. I tested the replicator to another HP laptop from 2011 and it worked perfect! What can I do to make it work???  

Read other answers
RELEVANCY SCORE 61.6

e series port replicator power light not turning on when placing e5550 in dock? Port replicatior working fine with other e series laptops

Read other answers
RELEVANCY SCORE 60.8

I'm desperately looking for a compatible port  replicator device for the above mentioned Yoga. Couldn't find any. Anybody can help? Thanks in advance.

Read other answers
RELEVANCY SCORE 60.8

Hello All, I wonder if the panel can help with a small problem Im having with my Home Office

My kit is a Toshiba Tecra M11 with Win 7 Enterprise, which I use with an Express Port Replicator and which I have just upgraded from a Seimens Lifebook, also with a docking cradle. The way i like to work is to use the laptop to log on to the central company network over the internet by VPN then use my Home PC to connect to the laptop via RDC - so I can use the widescreen monitor and large keyboard (my work involves very large excel spreadsheets). This worked fine with the Siemens, and mostly works with the Toshiba, but for one small problem.

After I have logged on to the network and connected to the laptop, I like to put the lid down, then put the laptop and its docking cradle out of the way on a shelf. This worked fine with the Siemens, but everytime I try it with the Toshiba it puts the machine into standby as soon as the lid closes and the RDC session on the main PC hangs. The Toshiba is mounted on its docking cradle throughout this process. Both the laptop & docking cradle and the main pc are all connected by a wired link to the same netgear router

How do i stop this happening, ie how do I use the unit on its docking cradle with the lid down ?

regards

Mark
Bristol, UK

A:Use of Tecra M11 on Express Port Replicator II

Sounds like you are missing some important drivers.

Have you installed the Toshiba Value Added Package and updated the BIOS?

Read other 2 answers
RELEVANCY SCORE 60.8

Good Morinig,I have two port replicator 3005 pr that is two or three days that turn on and turn off the display.I have this device from about three month they work well untill two or three day ago , in this two or three days many times a day turn off and after 2/3 seconds turn on again the monitor. I one of the LapTop I have upgrade Win 10 at the last versionin the other I haven't upgrade the SO yet.Many thanks for help. Luca 

Read other answers
RELEVANCY SCORE 60.8

I want to use my Dell Inspiron 1501 as a desk top.
I want to connect my desktop monitor, and keyboard to my laptop.
If I do can I still use the USB ports on my laptop to connect my mouse, external disc drives,
printer etc or should I connect all devices to a docking station or port replicator?
Should I use a docking station or port replicator?
Can you recommend a good reasoable docking station or port replicator?
 

A:Docking Station VS Port Replicator

I just found out DEll Inspirons do not have a docking station port.
Looks like I will have to use a USB connected port replicator.
Any comments on this option greatly appreciated.
 

Read other 1 answers
RELEVANCY SCORE 60.8

I have a sony viao which restarts all of a sudden when I plug it into my port replicator. Otherwise it works fine.

I checked the log and it gives me "ds1410d service failed to start" error log. It seems like a hardware device is looking to load the driver.

Can I post a minidump from that laptop and somebody willing to help me?

Thanks
Muhy
 

A:Laptop Restarts when in port replicator

Thanks Rick. The problem is I dont know which hardware device is causing the malfunction. I checked vaio's site and searched for the error but couldnt find anything. I really dont know which driver to update. So thats why I was wondering if anyone can help me out.
 

Read other 3 answers
RELEVANCY SCORE 60.8

My current answer based on limited research is Lenovo model number 433810U Are there ones made by Lenovo that are better than this model, or would this docking station serve most common needs well enough? Thanks!

Read other answers
RELEVANCY SCORE 60.8

Hi! Since today I don't have any sound on my sound jack of the port replicator II (PA3680E-1PRP) to run my external speakers. Instead, the internal speakers are running. On the notebook himself, the jack is working well, only the replicator port seems to be dead.

It worked fine over 10 months now without any complaint. I saw some similar cases in forums but no answer could help me. I don't have updatet any drivers yet.

I work with WIN7/64bit Servicepack 1.

Does anyone know how to fix?

Thanks, christophe

A:No sound on port replicator II (Tecra S11-12M)

Hi

Would recommend checking this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=56460

*Milo_Tweenie wrote:*

+Didn't realise that the 3.5mm audio output jack is actually driven by a USB hub within the port replicator.+
+Found that the USB Multimedia Audio Device had no driver installed for the audio port. Clicked the update driver button, it found the driver automatically, and now I have sound.+

Read other 1 answers
RELEVANCY SCORE 60.8

I have the Yoga 900-13ISK Laptop (ideapad)  /  PF0E7C54. What USB Port Replicator with Digital Video will work with this laptop with the latest Windows 10 installed? Can you provide a specific product and page URL?

Read other answers
RELEVANCY SCORE 60.8

I have problem with HP Universal Port Replicator (hstnn-ix07). Every time I start my NB (ProBook 470 G3), after some time (every day is different time) port replicator stop working. When I unplug and plug again USB cable, everything is OK, until I restart my NB. I'm using port replicator for: HDMI - external monitor, USB - keyboard, USB - mouse, RJ-45 - LAN and power source. I've searched event log, by there's nothing, only events about lose internet connection.

Read other answers
RELEVANCY SCORE 60.8

Hi I am in need of a port replicator for a Hammerhead p233.Preferably the
angled one or Flat one which can be used mobiling.There are a couple of items
on ebay but they are not complete or the right ones.
Quentin
 

Read other answers
RELEVANCY SCORE 60.8

Hi, 
Just done a fresh install of Win10 and I'm getting really poor performance from my Precision M6800 when connected to the E-Port II replicator, it can take 4-5 seconds to switch tabs in task manager, all screen re-draws are terribly slow.
When the laptop is running stand alone all is fine. 
I just checked and there are no drivers for the replicator, but does anything updated as far as the graphics to power this dock.  Could be a faulty dock but then it's a bit of a coincidence that it only happened after the OS upgrade. 
My twin Dell U2412 monitors are connected to the dock via DVI. 
Also, anyone know if it's possible to test the docking station? 
Thanks 

A:Poor performance via e-port II replicator

http://www.dell.com/support/article/us/en/19/SLN148687/EN

Read other 2 answers
RELEVANCY SCORE 60.8

Hi all, I'm having trouble to get Ethernet connection with HP 3005pr USB 3.0 Port Replicator. Basically it does not recognize the LAN cable when inserted and I don't get Internet connection. The LEDs on the bottom of the port do not light up. In Control Panel of Windows, it can see the adaptor ("HP USB Giga Ethernet") and it says "Network cable unplugged". Troubleshoot I did so far: Upgraded the driver to the latest version from the HP websiteRebooted my laptopWhen the same cable was connected directly to the laptop, I got Internet connection.Used a different cable.Checked the port. No sign of visible damage.Tested other ports. USB 2.0 and HDMI ports are working fine.Tried the minimal connection (just LAN and power cables). LEDs underneath the LAN port didn't light up.  Get a replacement from HP. The same issue. To me, it's a hardware issue, not a software issue. That's why I got a replacement, but I'm still having the same issue. It's difficult to imaging that two different units are broken in the same place. Things I want to know:What happens if you just connect power and LAN? Do the LEDs light up, just like when you hook up a LAN cable to a PC that is turned off? If so, then I need to get yet another replacement from HP. Mines don't light up no matter what I do.  I appreciate any comment/suggestion on this. Thanks, Ken

A:No Ethernet on HP 3005pr USB 3.0 Port Replicator

@Ken_B? Just found the 3005pr. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7834518&swItemId=ob_165468_1&swEnvOid=405... REO

Read other 2 answers
RELEVANCY SCORE 60.8

Not sure if this is the correct forum. I tried searching but must not have used correct key words as nothing came up.

Dell Dock model PR01X which is as I read, a Port Replicator. Does not work on my Latitude D620 running Vista Home Premium. I've also tried XP Pro SP3 on the same machine and still, nothing on the Dock works except the power plug and one light on the top.

I searched Dell user forums. Found this problem has persisted for over 5 years yet Dell has still not addressed it. Many of those users have had some success by installing the XP copy of usb.inf. Vista would not allow that. So I loaded XP onto another drive, swapped it in. Still nothing worked other than the power plug and that one top light that comes on when the lid is lifted. The network cord would not 'pass thru'. I had to un-dock, plug the network cord in to get on-line and go to the Dell site to download and install drivers to get the wi-fi working.

A chat with Dell Tech about this Dock problem was a total waste of time. They wanted to either sell me support or sell me a different Dock. Done a lot of searches, and reading, something led me to Dell R181862 which is Dell Notebook system Software Utility. This installed Client Configuration Utility allows my to edit the system Bios. I used that to add 'Docking'. After making those changes I found during Setup there is now 'Docking' listed and made those selections. It didn't change a thing. Nothing on the dock work... Read more

A:Dell Dock (Port Replicator)

Have you got the power adapter for the Dock ? I read online you need that connected as well as the laptop's own power adapter for the Dock to work.
 

Read other 3 answers
RELEVANCY SCORE 60.8

I bought an HP 3005 port replicator to use with my HP Spectre x360 - 13-4109na. When on its own, the laptop performs just fine. When I connect it to the HP 3005 port replicator, the laptop slows down significantly and becomes a nightmare to use. I have not been able to remedy the issue. Also, the drive of the port replicator is set to "read only" and I have not been able to amend this. What can I do?

A:Port replicator slows down laptop

> What can I do? Measure, measure, measure. Use the Windows "Task Manager" or the "Process Monitor" to view the resources (CPU, RAM, disk-drive, Internet) that your computer is using, to try to identify which application is consuming the most resources. Windows has an option to virus-scan (and also to run Disk Defragmenter) all newly-attached disk-drives -- that can take a while. 

Read other 1 answers
RELEVANCY SCORE 60.8

Hi all!I have to purchase 2 2in1 laptop for my company, and I want to connect at the office 1 screen, keyboard, mouse, ethernet cable and power supplyWe use to have HP laptop with docking station. But as I read in the forum, no docking station for this one.The remaining option is port replicator, but I'm little bit confused with all read here.Can someone advise me for a 720-81C3000CAX which port replicator should I use (prefferably le novo brand) to be sure I'll be able to connect 1 screen, keyboard, mouse, ethernet cable and power supply with only one cable?Thanks in advance for your support Romain

Read other answers
RELEVANCY SCORE 60.8

OK, I'm using an HP Spectre i5 notebook upgraded to Windows 10 together with an HP 3005 pr USB 3.0 Port Replicator. The Port replicator has one USB 3.0 connection to the notebook and my network connection, audio connection, external USB hard drive, wireless mouse and keyboard and monitor all connect to the Port Replicator. It works well, actually it's a great setup, but I have no way of knowing if I have the latest drivers fokr the Port Replicator.  I downloased what looked like the newest driver from the HP website and tried to install it and it said there was an older driver installed, did I want to remove it.  Rather tentatively it said yes, then it asked me if I wanted to reboot now and told me to select 'No' if I was going on to install new drivers.   But that just threw it into a loop. So now I don't know what will happen when I do restart. Assuming that doesn't cause a problem how do I check the current driver version, and how do I upgrade to a newer version - and which one?   

A:HP 3500 pr USB 3.0 Port Replicator drivers

RedHead. This one is dated 24 Mar 2016 7.9.1550.0 Rev.A http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5256508&swItemId=cp_163873_1&swEnvOid=419... REO

Read other 1 answers
RELEVANCY SCORE 60.8

Hello 2 all!

At the moment I'm working with two external 19" TFT screens connected to the Port Replicator II (Tecra S10-160 inside with display closed). One screen is connected to the available DVI port, the second one is connected to the available VGA port on the Port Replicator II.
One screen (DVI) is used as primary desktop, the second one (VGA) is used as enhanced desktop (so both show a different content).

My problem is the poor quality of the VGA signal and the problem, that my two new screens only support DVI.

Is there a possibility to connect two DVI screens to the DVI-D of the Port Replicator II? I already checked several DVI-Y-cabels but I'm still looking for a solution to connect two screens via DVI with the function to get two shared screens and not the same content on both screens.

Hope you got my point and have some information or product ideas for me.
Thanks in advance.

A:Two DVI screens on Port Replicator II with Tecra S10-160

Hello

Have you already tested a VGA to DVI adapter? So you can use the VGA connector on port replicator and the DVI port of your monitor.

I mean such a cable like THIS ONE

Using such an adapter you can still use the function to get two shared screens and not the same content on both screens. :)

Read other 6 answers
RELEVANCY SCORE 60.8

Can anyone suggest a dock/port replicator for a Flex 5.I'm looking for:VideoEthernet2-3 USB ports Thanks!

Read other answers
RELEVANCY SCORE 60

Looking for an official HP port replicator, designed for the HP ENVY TouchSmart 17-j185nr notebook.  Can anyone provide a valid part number for ordering?  Thanks much.

A:HP ENVY TouchSmart 17-j185nr - Port Replicator

LandonM wrote:... designed for the HP ENVY TouchSmart 17-j185nr notebook. ....Hi, No, you will never find one which is designed for your machine. Your machine does not have docking port therefore you can use any USB port replicator. HP has some products, the following one is very popular              http://www8.hp.com/us/en/products/oas/product-detail.html?oid=5278439 Regards.

Read other 1 answers
RELEVANCY SCORE 60

hi, I am a newbie on this site. I have learned a lot just by reading the posts. Thank you all.
My compaq presario 2570us laptop has repeated--dc power jack failures. I am a VERY careful user.
1. Decided to try another approach = buy a port replicator from HP site...found one there ...no photo...no description...am hoping I could use the port replicator to power up, maybe it has a *better* jack outlet.??
2. Another idea = buy a second battery + a separate battery charger...keep charging the batteries, (outside the laptop) and get a possible 4 hour use of computer, and not use the power/jack + cord at all.
Any thoughts/ criticisms of these ideas?
There was a *port replicator*qestion on this board, re a Dell, + lo- a Dell advocate tech gave a wonderful response...is there a compaq advocate aboard??

THANKS folks for a very cogent discussion board.
 

A:port replicator--compaq presario laptop

Read other 9 answers
RELEVANCY SCORE 60

Hi,
We're experiencing serious issues with 7270 laptops in our company (around 300 laptops).
While connected via docking station (USB port replicator) something is constantly swiping the touchscreen making the laptop unusable (prevents users from typing the user ID, password).
The only resolution is to shutdown the laptop removed it from docking station and start it again.
As a workaround we're disabling the touchscreen in device manager (which is not the best solution).
All the drivers are up to date as well as Microsoft Updates.
We're using Win10 x64.
Any help is much appreciated.

Read other answers
RELEVANCY SCORE 60

I use an HP USB 3 PORT REPLICATOR with my laptop, together with a monitor which is also connected via the port replicator. The laptop lid stays closed while I am using the machine. When the laptop goes to sleep I cannot wake it without having to open the laptop lid. How do I get the machine to wake up just by touching the keyboard or mouse, please?

A:Waking up laptop connected to a Port Replicator

Hi, I use external monitors, keyboards and mice nearly 100% for my machines and 3 of them on docking stations, 2 on USB por replicators. I set them up all the same: wake up from keyboards (setup from Device Manager):          Regards.

Read other 1 answers
RELEVANCY SCORE 60

Through work, I have a Precision 3510 and docking station (E-Port Replicator (331-7950)) through our IT department. According to Dell support, the E-Port Replicator is the correct one to use with a 3510, but there's a 3 inch gap between the back of the laptop and the docking station because the bus socket is located at the back of the laptop instead of the middle.
Is there a way to fix this? Everything works fine, but it makes the whole setup look flimsy and badly designed.

A:E-Port Replicator poor fit for Precision 3510

That gap is there because the early E Series Latitude models (and the Precision models that used the same docking connector) had their docking connector closer to the center of the laptop's underside, which of course resulted in the laptop being situated much closer to the "main" part of the dock.  Around the Exx40 series models and the corresponding Precision models, the dock connector was moved right up against the rear edge of the system, creating this gap when docked.  Normally, if you order one of these models AND order a dock at the same time, Dell includes a "spacer", which is essentially a piece of plastic that covers that gap that you see and allows somewhat easier positioning of the laptop over the docking connector.  It's still not great for fitment or aesthetics, but it's better than what you have.  You might be able to find one on eBay or something if you really want one, or maybe call Dell Spare Parts.  I'm not sure the spacers are actually sold separately, though.

Read other 3 answers
RELEVANCY SCORE 60

Hello,

I just bought a TECRA Z50-A-12X with HI-speed replicator replicator III 120.

It works but the computer is not stable and I'm afraid it will eventually damage the port see me problems when using.

Indeed, the PC is not properly seated in the replicator.

Is there a solution or did not have this application?

Thank you for your reply.

good day

A:Tecra Z50-A-12X isn't connected properly to Port Replicator III

Hi

Please don't understand me wrong but you should clarify this with Toshiba directly. Here on this forum you can hear some useful opinions and comments but I think you should get right info from Toshiba directly.

What you can also do is to contact nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope you will get professional opinion about this issue.

Long time ago I had Tecra notebook with port replicator and it was properly in place and really fixed in port replicator so there no danger of damaging small port placed at the bottom side.

Read other 3 answers
RELEVANCY SCORE 60

Hi, What portreplicator/docking station with support of atleast 2 monitors works with the new Yoga 3 Pro?











Solved!
Go to Solution.

A:Docking station/port replicator Yoga 3 Pro

Hi clashelaeander, and welcome to the Lenovo User Community!
 
A general-purpose dock like the ThinkPad USB 3.0 Dock will do that. I'm not aware of a replicator/dock made specifically for the Yoga 3 Pro. 
 
Hope this helps!

Read other 9 answers
RELEVANCY SCORE 60

I'm having an issue with an HP 3005pr USB 3 Port Replicator. My problem is that I can only get the attached laptop (HP ZBook 17 G3) to boot into Windows (7 x64 Enterprise) without requesting the Bitlocker key when the 3005pr is either attached or when it is not attached but not both. When I first attached the HP 3005pr I had an issue with the laptop attempting to boot from the port replicator but I fixed that by changing the boot order in the BIOS. After that I got the Bitlocker key request screen, I entered the key and followed the suggested instructions to allow the port replicator to work with bitlocker (disable and then re-enable bitlocker from Windows). This worked fine until I tried to use the laptop without the port replicator, I then got the Bitlocker key request screen again. What do I need to do to set up the laptop to be able to boot Windows with the port replicator attached and not attached without having to enter the Bitlocker key for one of these? At the moment I am trying to remember to attach the port replicator once Windows has started to boot 

Read other answers
RELEVANCY SCORE 60

EDGE 2 .. I have replaced the battery  with a Lenovo battery.  It will  not charge. I attempted to plug my phone into it, it will not recognize  it.  Any ideas?

Read other answers
RELEVANCY SCORE 60

I have a Sony Vaio PGC R505DL Laptop. Not long ago, the LCD screen went out. I have a PCGA UPR5 Port Replicator. It has an input on it that allows you to hook the laptop to a monitor and bypass the LCD screen. Only one problem.

How do I hook the port replicator up to the Laptop in order to use the Monitor (RBG)?

it has a cable integrated into the port replicator but I cannot figure out for the life of me where it hooks up to on the laptop (I don't have the docking station).

Anyone have any ideas?
 

Read other answers