Over 1 million tech questions and answers.

8560w Win7 64bit Cloning HDD to SDD failed with MBR error 3 ...

Q: 8560w Win7 64bit Cloning HDD to SDD failed with MBR error 3 ...

How to recover unbootable laptop? Received Acronis True Image with Kingston SSD purchase. Loaded it, ran it from Windows, selected source; internal HDD, and selected target; external USB attached SSD. Acronis True Image then wanted to reboot to begin the transfer. Upon reboot I had to swipe my fingerprint as usual for reboots. Then got MBR error 3 Then the boot process continued straight to Startup Recovery - found a problem, repair failed with error code 0x490This the current status and has not changed. Tried these cmds C: , diskpart /fixboot (successful result but no help) , diskpart /fixmbr (successful but no help) diskpart /ScanOS fails with no OS found ALSO - In BIOS I removed the Security password fingerprint requirement to speed all of these reboot attempts. Did I just lock myself out of the C: partition for good.? Appreciate any help and advice this forum can give to help me recovery the HHD and C: partion. ALSO 2: I scanned the HDD with Partition Wizard and it finds all the partitions though the big partition which I presume is C is listed with no label, 445GB, full, and unknown instead of NTFS. cripes

Read other answers
RELEVANCY SCORE 200
Preferred Solution: 8560w Win7 64bit Cloning HDD to SDD failed with MBR error 3 ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 70.4

Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space.
========================
Got "Page Failed to Load" error attempting to change my Win7-64bit display resolution.
This used to work, but no more ( don't know what might have caused it)

I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.

Please find that file attached -- Any help will be appreciated.....

thank you,
Chuck

A:"Page Failed to Load" error attempting to change my Win7-64bit display

Run the system file check again. Sometimes it requires multiple runs. Reboot after each run (or before the first run if you have not rebooted since the last time you ran the check).Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

Read other 2 answers
RELEVANCY SCORE 66

Hi every one,

i have this machine which is causing too much headache for me,

this machine was having Windows XP 64 Bit,
and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to Windows 7 because of some applications just working on Windows XP 64 Bit, but now there is a copy of it,

Any way i'm still having those BSOD crashes,
I have replaced the SSD 500GB hard drive with another regular hard drive with no results,
tried to remove and install nVidia Driver,
tried to install a different version of that driver with no results,
tried to remove McAfee AV and installed Kaspersky Internet security 2013 also no result,

now i have grabbed all the data using SF Tool, and i really hope that u can help me with that issue.

thank you

A:BSOD Winxp 64bit, Win7 Pro 64bit many error codes

- you have Bugcheck 116: VIDEO_TDR_ERROR
you may want to read this first STOP 0x116: VIDEO_TDR_ERROR troubleshooting


Code:
BugCheck 116, {fffffa800acaf010, fffff8800592c134, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8e4134 )
You can either try updating your NVIDIA drivers, or roll back to the most stable release (preferably WHQL'd)

- Uninstall your KIS 2013 as it's causing BSOD

Code:
BugCheck 3B, {c0000005, fffff88003594fa9, fffff88004409740, 0}

Probably caused by : klif.sys ( klif+95fa9 )

Followup: MachineOwner
klif.sys - Driver Reference Table
you can use the tools here Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

-

Code:
fffff880`038cba08 fffff880`04546802Unable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
klim6+0x2802
This is part of KIS 2013, and apparently messing with your TCP/IP connections, which is in conjuction to:

Code:
fffff880`038cb9d8 fffff880`05b4784fUnable to load image \SystemRoot\system32\DRIVERS\yk62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Modu... Read more

Read other 3 answers
RELEVANCY SCORE 66

Hi,
I have recently tried to install a 64 bit version of XP on my Dell Inspiron N5050.
It was running Win7 before and I needed XP for work.
I made the partition, and installed XP and now Windows 7 will not boot. I tried installing EasyBCD but since the drivers were not installed on the new OS, I can't connect to the internet at all.
I just need some help on possibly removing the XP partition and recovering with the win7 recovery partition so I can just run XP on a virtual console.
When I boot the computer it does not give me the option to use the recovery disk or boot windows 7 at all.
Let me know if you need any other information.
Thanks

A:Windows XP 64bit/Win7 dual boot failed

To repair Windows 7
Startup Repair
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times



   Information
We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create



Did you make the OEM manufacturer's Recovery Disks?


How to use Dell Recovery Partition,make Recovery Disks & how to order Recovery Disks.
Manuals | Dell US
RouteTo
Dell - Support

Read other 4 answers
RELEVANCY SCORE 64

Hey, I'm trying to upgrade from a 750Gb hard drive to a 500Gb Hybrid drive, and I'm running into a few difficulties. I'm using the free version of Macrium Reflect, every walk through I've read says to select the partition with the windows symbol, however I have two? Is this normal? I've been trying to clone both just in case. Shown below.


Secondly, the first partition clones just fine, but my C: drive won't and I keep getting the below message.


Any help would be muchly appreciated.

Read other answers
RELEVANCY SCORE 63.6

Hello

I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)

I sucessfully upgraded from Vista 32 to Win7 32

Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)

Now I would like to go from Win7 32bit to 64bit

When I try and run the Win7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only"
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.

I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Win7 32 was smooth and did require all the extra work of a reinstall.

Can someone help me here?

Thanks

A:Win7 (32bit) to Win7 (64bit) upgrade install error

I believe to go from 32-bit to 64-bit, you will have to boot off the DVD. The installer is a 64 bit application that won't run under 32-bit. Find instructions to create a DVD if you don't already have it.

Good luck!

Read other 1 answers
RELEVANCY SCORE 61.6

Hello I'm Having Problem Updating My Windows 7 Ultimate into Windows 7 Ultimate SP1


I Tried Using System Update Readiness Tool for Windows 7 (KB947821) [August 2011] But an Error Pops Up


Please HELPP!!

A:Win7 Ultimate Update Failed to Win7 Sp1 Error Code 80073701

It is mostly caused due to corrupt language packs. Can you uninstall all language packs, reboot the PC, and then try to install the service pack again?

Read other 2 answers
RELEVANCY SCORE 61.6

Hi, i cant find the hotkey support driver in the official hp driver page.Where i can download it? Thank you!!  (ps. the hotkey doesnt work, and the wifi button neither. Keep orange light.)

A:Hotkey support for elitebook 8560w win7 64

Hello @hysteriia95,  Try this drivers: https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-elitebook-8560w-mobile-workstation/507...  Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

Read other 1 answers
RELEVANCY SCORE 58.4

Hi, whoever's reading this.

I recently wiped my drive with both diskpart -> full clean and clean to try and fix up my drive so that I could use it again after a nasty virus infection, but nothing seems to be working right now, including my drive. After my most recently diskpart -> clean, I tried to reinstall Win7, and got an error during the installation; after rebooting, I got a different error that seems to loop in a reboot->error->reboot cycle.

The error title is "Install Windows", and the text reads:
The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, then restart the installation.

I got a Win7 repair .iso online and burned it to a USB and made a bootable USB. I also have my Win7 upgrade disk that I've been using to reinstall Win7, but regardless of which method I use, I get the error and get kicked right back out. I've tried to do as much as I possibly can to fix/diagnose/anything this issue, but I haven't figured much out, and google doesn't seem to have much either.

Help, anyone?

A:Error while installing Win7 64bit; 'Unexpected error'

wipe the disk once again with DiskPart and Clean.

Go to this website and download the desired ISO, burn the ISO to DVD and install Win 7.

Official Windows 7 SP1 ISO from Digital River ? My Digital Life

Read other 9 answers
RELEVANCY SCORE 57.6

I'm having a terrible time with a Visual C++ error on boot of a fairly new Win7 system. The contents of the dialog are...

Microsoft Visual C++ Debug Library

Debug Error!

Program: c:\windows\syswow64\deywpjp\atisvc_todkdk.exe
Module: c:\windows\syswow64\deywpjp\Director_fcrixe.dll
File:

Run-Time Check Failure #2 - Stack around the variable 'CacheManager' was corrupted.
Click to expand...

Also of note is that an instance of "iexplore.exe *32" runs on boot. I've searched high and low on any and all keywords in that dialog and have come up empty.

The system is an Acer desktop model...roughly 1.5 months old.
Running Win7 Home Premium 64bit
Troubleshooting Steps, so far...

Disable all but the necessary Startup and Services items in msconfig
Removed Norton IS
Installed AVG trial...ran full scan...found only cookies
Installed/ran malwarebytes...identified one potential Trojan related to explorer.exe...removed
Removed Visual C++ 2005 Redistributable
Installed Visual C++ 2008 Redistributable...and patched it
I'm truly at my wit's end about this one!!! Any and all help would be appreciated
 

A:Win7 64bit with Visual C++ Error on boot

Some more info...I downloaded and ran Process Explorer and the looked at the atisvc_todkdk.exe entry...specifically, the strings tab. It referenced the website webwatcherdata.com.

A bit of research yielded WebWatcher a monitoring/spyware app. Now I have to determine whether or not it was intentionally installed or came as a virus payload. Norton was installed at the time of 'infection' so I hope that narrows it down to an intentional install. Hello, Trust Issues!
 

Read other 1 answers
RELEVANCY SCORE 57.6

Getting the following "issue" and not sure how to proceed?
I went to intel and installed all the latest win7 64bit drivers
I verified I have the latest bios from intel
I have the Intel DP35DP

I also am getting a PCI Simple Communication Controller that I can't find a driver for..I assume this is the old dell modem I have installed (Conexant RS56/SP-PCI - R6793-17)
Address a problem with Intel Active Management Technology

Your version of Intel Active Management Technology isn't compatible with this version of Windows.
Go online to the following article for more information about possible solutions to this problem:

Click to go online to the Microsoft website for the KB article
Which version of Windows am I using?
You are using Windows 7.

Computers that use Intel vPro technology may have devices that are unrecognized in the Windows 7 Device Manager

A:Win7 Pro 64bit driver issue & error

I was able to fix this issue
I removed my modem which wasn't the PCI equipment as I still had the same issue
I was able to download the latest intel MEI driver for vista 64bit
it failed initially but win7 changed compabability mode and was able to install and reboot
PCI device went away
installed my old dell pci modem and win7 found it as "In-Build CX11235"
all good thus far!

Read other 1 answers
RELEVANCY SCORE 57.6

Hello everyone, I'm facing a problem with my HP Pavilion DV7-QF402EA#A2N. It was working well yesterday but when I turned it on the morning I found this error:Wireless module not supported........Bluetooth Module ID (704) However, there is nothing plugged to my laptop and I didn't change any card. I didn't touch the Bios either. I can't seem to understand the problem. Please be a bit specific because I'm not a big tech guy. Thank you for the help

A:Bluetooth Module Id 704 Error. Hp DV7. Win7-64bit

anyone? please help . [quick update]:I removed the wifi card and the laptop is working but when I put it back on I get the same error. How do I update or fix the driver or the bios?

Read other 6 answers
RELEVANCY SCORE 56.8

I believe I have a virus on my PC.  On average, once a day my PC reboots and has an error about DCom failed to respond and system will reboot.My AVG 2014 is finding and giving message about thread Virus Found JS/Fake Codec.  My malbytes scan comes back clean. Also, my SSD keeps filling up.  It is a 250 gig SSD, I recently cleaned up 30 gig of files and moved to another partition.  I had about 10 Gig Free at that time, now less then a week later, I am down below 3 gig free. The C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files directory has 94 gb of the  files.
 
Any advice or suggestion would be appreciated, I have been having issues for over a week now.

A:Win7 64bit PC reboots daily with Dcom error

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkma... Read more

Read other 5 answers
RELEVANCY SCORE 56.8

Each day, I find that my computer has rebooted and is at the logon screen. I have changed my Windows updates to Check for updates but let me choose to rule that out as the cause of the reboot.  When I look in my application Event Viewer I see:
 
Faulting application name: svchost.exe_DcomLaunch, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000014d67b5
Faulting process id: 0x42c
Faulting application start time: 0x01cfbf6cfd576e42
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: unknown
Report Id: 69aff776-2c56-11e4-a0ca-94de807aaa61
 
This is around the time that the PC rebooted.  In the System Event Viewer it shows "The DCOM Server Process Launcher service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 60000 milliseconds: Reboot the machine." at the same time.
 
Recently, AVG AntiVirus Free has been reporitng some JS/FakeCodec errors. I ran a fresh scan yesterday and removed 6 of them.  Malwarebytes returns no issues.  Today, my PC rebooted again.
 
Not sure if I have a Virus or an application issue so posting here.
 
Please let me know what additional infomration I should provide and thank you for your assistance.
 
Windows 7 Enterprise 64 Bit
AMD FX 8320 Eight Core Processor
24 GB Ram

A:Win7 64bit PC reboots daily with Dcom error

Hello JPinMD, run these next and let's see how it is.Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.Download TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is require, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here....ADW CleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double-click on AdwCleaner.exe to run the tool.Vista/Windows 7/... Read more

Read other 3 answers
RELEVANCY SCORE 56.8

Hello, and first of all I'm not sure if this is the correct section to post this but... I've recently decided to reinstall win7 64bit because my computer started freezing up occasionally while browsing, playing games or even watching youtube videos... the freezes would pass after a few minutes and the computer would recover and start up/shut down would take a long time as well. So I thought that reinstalling windows might help as I havent done it in a long while. But I ecountered a problem while installing win7 64bit, I receive these errors (0x8007045D and later after trying a few things it changed to 0x80070002 both times it stated something about files missing or being corrupt) while on the "extracting windows files" section of the setup. I've done a clean install every single time and formated my HDD (seagate barracuda 7200.10 320GB) but got an error every single time but at various %'s (once it went up to 70% other times it would get stuck as soon as 5%). I'm really out of ideas now, I've tried switching RAM's, switching DVD Drives, Disconnecting my GPU but nothing seems to help... has my HDD died? Or prehaps my Mobo or CPU is acting up? Help please!

Oh, and I burned my win7 ISO's myself via imgburn - I've used the slowest possible burn speed (x2) and did it multiple times but every single DVD gave same error. Also I've tried multiple ISO's and downloaded them multiple times as well to confirm they didnt get corrupted while downloading.

My S... Read more

A:Error's (0x8007045D and 0x80070002) while installing Win7 Ult 64bit

Where did you get Win7? Did you burn the ISO to DVD yourself? If so, confirm ISO or download another, burn to DVD using ImgBurn at 4x speed.

Next try writing ISO flash stick using Universal USB Installer with Win7 in the dropdown menu.

Test your HD using Seagate SeaTools extended CD scan, which can also wipe the HD afterwards before trying install again.

Next try install after removing all but 2gb of RAM. Then swap RAM sticks. TEst your RAM: RAM - Test with Memtest86+ CD for 5-6 passes or overnight.

Unplug all other HD's and peripherals. REset BIOS to optimal defaults in BIOS Setup. Report back all results.

Read other 4 answers
RELEVANCY SCORE 56.8

I have a HP DM4 W7-64Bit notebook PC. I'm a very techy person and keep the machine very clean. I run Avast for A/V protection, run MalwareBytes from time-to-time to check too and both are clean. The machine's use is 90% for MS Office....mostly Outlook....with some web surfing. I even use CCLeaner to keep the temp clutter out.

Yesterday MS released a bunch of updates and I have never had any issue installing before.
All ~14 updates installed except KB2799494.
MS13-017: Vulnerabilities in Windows kernel could allow elevation of privilege: February 12, 2013
It gave me error code 80070057....so I downloaded MSI and ran on PC....same error.
Download Security Update for Windows 7 for x64-based Systems (KB2799494) from Official Microsoft Download Center
I did some web surfing and not much out there on it.
update error code 80070057 - Microsoft Community
For the above I did run SFC / SCANNOW and came back OK.
I even found this link through another thread that had the error referenced and recalled on other machines in past that .NET Framework could be corrupted and cause issues. The KB does not seem to be associated but I tried the MSI FIXIT and also .NET repair steps.....no change....still fails.
Error codes

I do have Horzion RollBack RX on the machine but usually only keep a week of so of previous snapshots.
I also religiously image my HDD with Macrium Reflect.
I mention the RX install because I can set a restore point and try suggestions and return to prior state very easily.
... Read more

A:W7-64bit Feb-2013 Updates; KB2799494 Failed, Error Code 80070057

Try to install patch again

Make a copy of C:\Windows\Logs\CBS\CBS.log (otherwise you can't open it)
Post that file and C:\Windows\WindowsUpdate.log as well

Zip them to make it smaller

Read other 9 answers
RELEVANCY SCORE 56.4

Diagnostics below. Suddenly I'm getting a Boot message "illegal copy of WIndows" - -
I follow prompts to Activate this LEGAL copy of Win7 Pro 64Bit -
The Error Code is: 0x8007232B.

This is an HP laptop perhaps a year old.
I Restored windows a month ago after a buggy Windows Update.
I've had errors related to "KMS" starting some weeks ago, but it is in Startup.

I've run the MS Support suggestion for "MAK instead of KMS": https://support.microsoft.com/en-us/kb/929826#method1
but reboot still says "illegal windows" etc.

Diagnostics:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-J8D7P-XQJJ2-GPDD4
Windows Product Key Hash: xgsndMkYdJsYmUng0qIJ/thx+HI=
Windows Product ID: 00371-868-0000007-85236
Windows Product ID Type: 1
Windows License Type: KMS Client
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {6F3A4220-4071-4748-8371-B7B6F1368C4C}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.150722-0600
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File... Read more

Read other answers
RELEVANCY SCORE 56.4

So I built my third PC in May of this year and have been increasingly experiencing problems. These problems include inability to install SP1, IE crashing, Firefox crashing, and even more frustrating, BSODs.

The errors I received when trying to install SP1 were 0x80070570 and 0x80070490. I looked them up and tried all the suggestions that I was allowed to do. For example, I was not able to complete a disk check before startup because of some error.

This led me to finally do a repair upgrade which was suggested in some forums. I followed a PCWorld article and did what they told me until during the upgrade repair, I received error 0x80070241. It says some of the install files were corrupt or something along those lines.

I am not very computer savvy, so if you can please provide a link for help that requires me to do something above a normal computer user's capabilities would be appreciated. I've started graduate school and I really need my computer to not crash and BSOD. Please help and you'll have my undying gratitude forever! Thanks!

A:BSODs then error 0x80070241 during win7 64bit repair upgrade

Here is my SF Diagnostic Tool results. Please let me know if I'm doing anything wrong. Attachment 227600

Read other 5 answers
RELEVANCY SCORE 55.6

Hi Folks,

My Windows 7 home premium 64bit SP1 has failed to update since 2012. Every time I tried, the system update ended up with error code 8007370B: Windows Update encountered an unknown error.

I have followed the steps at

Windows Update Posting Instructions

and installed the SURT.

It installed correctly but did not solve the problem, still the same error code: 8007370B.

I have also tried running sfc /scannow in an elevated cmd, but it failed with the following output:C:\windows\system32>sfc /scannow

Beginning system scan. This process will take some time.


Windows Resource Protection could not perform the requested operation.

Attached is my CBS.zip and windows update error screenshot. I want to point out that I have installed several versions of SURT from 2012 till now, none of which fixed the problem, but may have generated some logs to CBS.


Thanks for any possible solutions.

A:Win7 home premium 64bit update fails, error 8007370B

See if you could use SFC /scannow during boot

SFC /SCANNOW : Run in Command Prompt at Boot

Read other 9 answers
RELEVANCY SCORE 55.2

Windows update for IE10 on Windows 7 64bit fails continuously with error code 9c59. I tried the stand alone updater with the same results. All other windows updates complete successfully, it's just IE10 that continually fails.

Don't know if this is related but I do have problems with IE8 (current browser). After a while, an open IE window will become non responsive and can't be closed out. I have to use task manager to close it down. I have sent off the reports to MS, but no solution has appeared.

I've attached the cbs file. Let me know what else I can do. Thanks.

A:Windows update for IE10 on win7 64bit fails with error code 9c59

There are no significant file errors in either SFC or CheckSUR logs.

In these cases, it has sometimes been a solution to uninstall IE9, reboot a couple of times, and then reinstall IE9 again, before installing IE10 successfully.
It's worth a try

Read other 5 answers
RELEVANCY SCORE 54.8

HI all,

Just registered after seeing a similar thread on here to the issue I have.

I have a laptop with 7 Home premium 64 bit SP1 that is up to date with the exception of an IE9 update that refuses to install at all.

Have tried various different methods but to no avail including attempting to remove IE9 and then try a reinstall.

Uninstall hasn't been possible. Any help would be much appreciated.

Attachment 256916

Attachment 256917

A:Win7 64 Update failed Error 9C48

Hello adz76 and welcome to the forums

I've never seen a 9C48 error code from these problems before! Thank you for all of the logs, they are very helpful.

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:

C:\Windows\Logs\CBS\CheckSUR.persist.log
You will probably be shown the error code 0x8024200D after performing this fix, if so, please download and install the update from this link. It must be downloaded using Internet Explorer.

Download Cumulative Security Update for Internet Explorer 9 in Windows 7 x64 Edition (KB2675157) from Official Microsoft Download Center

I... Read more

Read other 3 answers
RELEVANCY SCORE 54.8

Hi

My problem is, the boot is failed when:
[-] For 7: when 7 was loaded, it will making a windows logo from an abstract shape.
then it will 'blep', off, restarting, when the windows logo hadn't formed
[-] For 8: when the rou d cycle was rotating, 'blep'
Both No BSOD, making me so confused.
And once you got in desktop successfully, everything's normal
Well, it's true my laptop is old, but... I wanna know why this happen.

Some things:
[-] My ntbtlog: https://www.dropbox.com/s/sumaoxizoheimsq/ntbtlog.txt
the SUCCESS part is that's the log when it load successfully
the FAILED part, 'tis failed...
[-] Once, Repair Mode gave this:
A patch is preventing the system from starting
Error code: 0x490
[-] When I tried 7 safe mode:
FAILED: it 'blep' after loaded CLASSPNP.sys. But when I got into safe-mode safely,
that's also the last driver loaded, so does the problem lies after that?
[-] I don't know if there has a meaning, but some things I've done (semi-randomly) after this started:
- upgrade BIOS
- upgrade Intel's driver
- bootrec.exe fixmbr and fixboot
note that the problem happen before and after I've done this

I can't give up to install those before I know why it's impossible, since I really need to use one of them for my college assignment.

A:Win7/8 boot failed, error 0x490

Which was installed first?

Please post back a screenshot of Disk Management - Post a Screen Capture Image - Windows 7 Forums.

Read other 9 answers
RELEVANCY SCORE 54.8

ok lemme start by saying Hey to everyone in the board,
in the past few days i've been Reading, almost every Post i found about Imaging in the Forum, but all that left me in the End is confused.

I have a windows 7 64 bit Machine (Bare Minimum Office, AV, Drivers And Custom Settings, Reg fixes)

I want to make an Image of this Install so i can later Restore it if i choose to.

Until now i've been very Happy with Hiren boot cd
and been using Acronis True Image and Ghost For the past years through Windows XP And Vista.

and been very Happy with it and it worked flawlessly for all my Images.

I Didn't Mind Maintaining several Images for my 2 Laptops and 2 Pcs that's the way I want it.
After that I moved to Working with WinPE and Imagex in vista 32 bit and everything was fine.
Year ago I decided to move to Win 7 64 bit, made all the adjustments with my software and drivers and installed a Basic and a Complete PC with 2 images, using hiren boot cd and acronis and ghost,
Been painfull to find out that it didn't work, perhaps because of the System reserved partition that wasn't backed up.
My System works in AHCI Mode now.
I Refuse installing a Software on my PC I don't want it to do Weekly Backups, all I wanna do is A boot cd that Images my drive to a single file, that I can restore it from the boot cd later on.
I Tried working with:
Macrium reflect,
Windows Backup and restore center
Acronis true Image Home
CloneZilla (Which doesn't make a single file but alot... Read more

A:Win 7 64BIT and Disk Cloning Software Suggestion.

Welcome

Software recommened most by this forum is Macrium Reflex and Paragon.
http://www.paragon-software.com/home/db-express/

http://www.macrium.com/reflectfree.asp Although you did not like this one

System image inclued with you OS is also very good.

Read other 9 answers
RELEVANCY SCORE 54.8

I'm getting this system error when my computer does multiple things or runs specific aplications. I used to have Win7 for years straight flawless since these errors started to happen about 3 weeks ago. Differently from others users from this forum experiencing same error as mine I don't get this error when returnining from hibernation or restarting. It just happens on a regular basis. The behavior before the crash: first the aplication I'm running stop responding, then mouse cursor freezes, then the computer itself stop and finally after a few minutes the blue screen. Things that i've done so far:

1 Re-installed Win7 (all Windows Updates as well) / All drivers were updated
2 Replaced the lithium battery from mobo, checked all cables and memory connections
3 Ran Full virus scan
4 Ran Chkdsk /r (x2)
5 Ran CCCleaner, Advanced System Care, Spy bot search and destroy, TSSSKiller full scans
6 Ran Windows? Malicious Software Removal Tool (KB890830) x 64
7 Ran Scf /scannow

Needless to say items 3 to 7 didn't show any issue. Somehow I can't make Windows create the dmp files (yes I've enabled it in Startup and Recovery Settings and on and followed all the instructions said on this forum) but it didn't even create the Minidump folder in C:\Windows. Not sure if updating the BIOS would help. Yesterday Microsoft lanched an update on Windows Update and I thought it would solve it, but didn't. Attached the zip file from SF Diagnose Tool below.

Any ideas please?

A:Frequent BSOD Kernel Input Data Error 0x07a on Win7 64bit ptBR

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any kind of disc cleanup program before you upload the data.

Read other 9 answers
RELEVANCY SCORE 54.8

when trying to restart windows firewall i am getting this... "service-specific error code 5"
using HP G62 laptop running Windows 7 SP1 Home Premium 64-bit
 
i had a rootkit on the laptop and i think it's completely removed but i still cannot activate the firewall, I used kaspersky rescue disk 10, rkill and mbam to remove rootkit.
 
hope someone can help....

A:Unable to start Windows Firewall service-specific error code 5 Win7 64bit

System error code 5 is "access denied". http://msdn.microsoft.com/en-us/library/windows/desktop/ms681382%28v=vs.85%29.aspx
 
But I don't know if your error code is a system error code. If it is, you can check the permissions on the firewall service with this command:
 
sc sdshow MpsSvc
 
I have this on my test machine:
D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)
(A;;CCLCSWLOCRRC;;;IU)(A;;CCLCSWLOCRRC;;;SU)(A;;CCLCRP;;;S-1-5-80-<omitted>)

Read other 11 answers
RELEVANCY SCORE 54

Anyone know of a good free Cloning program that is 64bit compatible? for Vista ultimate being upgraded to win7

for the specific purpose of making an exact restore-able image of the HD.
That can be copied to a reformatted harddrive after a major colaps of the os or virus damage?

I also want to be-able to do a periodic erasure of said hd for security and privacy purposes. which I would do before formatting the HD again.

I like to download a try a lot of free stuff and as you know it can mess your system up good and proper, to the point, its better to start over from a cloned image of factory settings that are up to date .

A:Good free Cloning program that is 64bit compatible?

PS to my former comment. Could not modify my last post, for its still in the approval waiting.

I would be cloning to DVD or DVD dual layer

The Boot CD or disk Would need to be made by said cloning software For I am new to the Cloning world. pun intended

Read other 4 answers
RELEVANCY SCORE 54

Help!
 
Helping a friend with their Windows 7 system.. they DON'T Remember what they were installing or uninstalling.. or if they had a power outtage during a microsoft update?.. they can't remember..
That said.. when their system powers up now.. they get 2 very small pop-up boxes in the centre of the screen - the first one announces that a .DLL Failed to load only 2 options are the RED "X" or the [OK] button. As soon as you close it.. a second box pops up..this time identifying itself as ""HOTKEY KEYBOARD.." and only giving the message "Failed" and no other details, error codes..only Red "X" and/or [OK] button
Upon closing that box.. everything else.. works just fine..
..Any idea what ELSE i could run.. to eliminate this .DLL pop-up.. and its' annoying sidekick?
I ran.. AUTORUNS..it finds nothing rogue..nothing suspicious.. nothing comes up.. yellow nor pink.. (no flags.. nothing..i mean.. really clean.. tight.. lean)
i DID find 2 entries ? ???? and ? ??????? one which had the "status/description" listed as missing file.removed the "check-marks"..from their resepective boxes.. .exited out.. did a REBOOT.. no change.. still there..
ALSO RAN the following..just to make sure
Malwarebytes - Anti-Rootkit = 0
Malwarebytes Anti-Malware = 0
Comodo Anti-Virus = 0
Spybot Search and Destroy = initially 71 issues most of those cookies (now turned off)
Eusing Free Registry Cleaner = found and removed - 141.. first pass 56..second pass..
Combofix = found 3 infections 1 orphan,
Comod... Read more

A:Win7 boots up fine with Failed to load .DLL error dialog box

Please...post your ComboFix log and the requested FRST log...in a new topic, following Steps 6-8 of Preparation Guide, Before Using Malware Removal Tools and Requesting Help - http://www.bleepingcomputer.com/forums/topic34773.html .  Note that the new topic is to be posted in the same forum which reflects the Preparation Guide.  If you do not have access to the ComboFix log at this time...please post the FRST log data requested in the Prep Guide.
 
Thanks .
 
Louis

Read other 1 answers
RELEVANCY SCORE 54

I've been dealing with this for some time and have been using another browser in the meantime. I also tried to install IE10 with the same problem. Also tried to uninstall IE9 but could not even do it manually. The IE9 security update failures began with KB2817183 and have continued through KB2829530 released on 5/14/2013. Other Windows updates that come up appear to work OK. I have run the sfc /scannow tool and the system update readiness tool and find a list of 4 unavailable repair files in the CheckSUR file. Ultimately I want to update to IE10 but am guessing that I will need to fix these files before that can happen. I have pasted the CheckSur file here for convenience but also have attached a zip file of all the CBS log files. Any help or suggestions will be greatly appreciated. Thanks!
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-05-21 13:23

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_9.4.8112.16464_none_bc19a9c95f45aeb7.manifest amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_9.4.8112.16464_none_bc19a9c95f45aeb7
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_e... Read more

A:Failed Cumulative Security Update IE9 Win7 Pro SP1 x64; Error 80073712

Hello jacriverlea and welcome to the forums

Windows Update Package Replacement
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
C:\Windows\Logs\CBS\CheckSUR.persist.log
Tom

Read other 3 answers
RELEVANCY SCORE 54

Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7

Error log just says

Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.

System


-
Provider

[ Name]
Microsoft-Windows-WindowsUpdateClient

[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}





EventID
20





Version
0





Level
2





Task
1





Opcode
13





Keywords
0x8000000000000028




-
TimeCreated

[ SystemTime]
2015-12-10T19:11:07.145622700Z





EventRecordID
601760





Correlation




-
Execution

[ ProcessID]
308

[ ThreadID]
5688





Channel
System





Computer
AlisonXPS




-
Security

[ UserID]
S-1-5-18

-
EventData


errorCode
0xe06d7363


updateTitle
Upgrade to Windows 10 Pro, version 1511, 10586


updateGuid
{2AF34381-A9A9-42D5-8A36-1B86F0A6235F}


updateRevisionNumber
202

Anti virus is just Windows Security.

Any suggestions appreciated

Mike

A:Upgrade from Win7 Pro to Win10 Failed Error code 0xe06d7363

1) Start your computer and log on as an administrator.
2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.
3) In the new window, select "Restore my computer to an earlier time" option and then click Next.
4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next.
5) Click Next on the confirmation window.
6) Restarts the computer when the restoration is finished.

Read other 6 answers
RELEVANCY SCORE 53.2

The two Win7 laptops see each other but, when I try to Homegroup with the Vista laptop I get an error "The RPC server is Unavailable"..did a search on here as well as the net and couldnt find any surefire solution or one thats understandable

Read other answers
RELEVANCY SCORE 53.2

how transfer data from win7 64bit to win xp 64bit?
I searched on google but not found anything, no software. I also tried WET 7xp-64bit but not working.

A:how transfer data from win7 64bit to win xp 64bit?

As you are moving the data in the reverse order to most people I am doubtful whether you will find specific software so I would connect the two computers by Team Viewer and use the file transfer facility.

Read other 1 answers
RELEVANCY SCORE 52.8

I just bought a ThinkPad T400, and 8GB DDR3 upgrade kit. After first log on, I realized the Windows 7 is 32bit. How can I upgrade to Ultimate x64 instead?

Thanks for your help.

A:Win7 32bit Home Premium to Win7 64bit Ultimate: Possible without Clean

I think you have to Wipe and reinstall. You can't go from 32bit to 64bit over the top of the 32bit.

Read other 9 answers
RELEVANCY SCORE 52.8

I have two 500 GB HDDs, and I installed Windows 7 64bit on one, and 32 bit on the other. When im in my 64 bit OS, I can't access my 32 bit HDD. When im in the 32 bit OS I CAN access the 64bit HDD.
From 32 bit I can access
32bit HDD
64bit HDD

From 64 bit OS i can access
64bit HDD
Why is this?
 

A:Problem with Hard Disk after dualbooting Win7 32bit with Win7 64bit

Read other 7 answers
RELEVANCY SCORE 52.8

Hey,

I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.

- Any ideas how I can get the 64bit version?

- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?

- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?

Thanks for your advice.

A:Reinstall Win7 32bit to Win7 64bit /backup disc content

Camo15, Welcome to SevenForums
The first two questions call Digital River about a refund and reorder. Have heard that some have had success with that. No need to un activate however if you decide to try to use that Key again then you will have to call MS and talk to them to make it work on another pc if that is your intent. Good luck to you and enjoy!

Read other 1 answers
RELEVANCY SCORE 52.8

Yesterday I bought a new 128GB Verbatim external SSD, I wanted to transfer my OS onto it so I followed this guide, I formatted the SSD to NTFS and got my OS drive down to 104GB and used "EaseUS todo Backup" to clone it onto the SSD, let it run overnight, woke up this morning and saw the PC still on, there was an error message saying it failed to write a sector. Now I cannot access the SSD to reformat it or anything.

Here are some screenshots, please help.

Disk Management view says no media, can only change letter of drive nothing else.
http://i.imgur.com/UrTiyW1.png

Can see my SSD in C: - Properties - Hardware.
http://i.imgur.com/5MP75HX.png

A:HDD cloning failed now my new SSD cannot be accessed by Windows.

Any advice appreciated... should I try to return the SSD?

Read other 9 answers
RELEVANCY SCORE 52.8

Ok so I think I have a failing hard drive on my Sony Vaio VPCCW2S1E - Windows 7 home premium 64 bit. Which is why I was trying to do an up to date system image in the first place (using Windows 7 backup and restore). My system image kept failing. So I got a new hard drive and sata/usb cable, downloaded macrium and tried to clone the drive to the new drive, carefully making sure I had got everything right. This also failed. So now I have just backed up copies of all documents, photos etc on an external hard drive, made a note of all programs installed and their licence numbers, and done a full disk check. It found a few bad sectors and sorted them so reckon I need the new hard drive - the laptop is 5 or 6 years old.

Question is, what do I do now? Should I try cloning again now the bad sectors are sorted? Or should I just put the new disk in and use my recovery discs to reinstall windows and put all my files and programs back on?

Also - as the clone failed, presumably something will now be on the new hard drive - do I need to wipe it now? Or just format it? Thanks.

A:Cloning failed, backup not working

Can you copy and paste the files in the drive? Or cant you boot?

Read other 5 answers
RELEVANCY SCORE 52.8

We all know there are tons of different ways to do anything, so I just wanted to check my procedures with you all for any obvious or fatal flaws.

I'll be cloning my Windows 7, on a 115gb partition, to a Kingston V+ 128gb ssd drive. The origin drive is 460gb, but I've deleted the other partitions (after backing up of course).
The origin partition is on the left of the drive.

I'll be using the Acronis True Image that comes with the bundle.

Currently, the boot drive sits in the disk 1 position - disk 0 is my old XP drive, which I still keep as a dual boot.

Once the cloning is done, I'll shut down, change the SSD to the disk 1. I'll leave the old win 7 drive unconnected until the new drive is stable, then reconnect, reformat and partition it.

I know I may have to do a repair install so I'll have the win7 disk handy.


Does this plan work?
Will I have trouble using Acronis true image cloning the 115gb partition of the 460gb drive to the new ssd even if the other 345gb are unparitioned? Do I need to unformat the unused space?

Please don't ask why I dont do a clean install. My preference is try this way first.

thanks in advance for your help.

A:Cloning Win7 to SSD

Here's how I did it...Partition Image - Restore from a HDD to a SSD

Read other 9 answers
RELEVANCY SCORE 52.4

I have a new Toshiba Laptop (Win7 64bit CORE i3). I would like to run (via usb) and old hdd from my desktop which was 32bit Win7.
I have the old hard drive in a SATA enclosure and running it via USB to my laptop. When I attempt to either copy or read the old hard drive I get a write protect error. I have tried
the MS registry changes to remove "write protection" but the registry entry they call for is non existent in my laptop registry.
My last post on this was annotated as solved...but my explanation was weak. I do not want to run this drive as a permanent addition to my system, I just need to copy some files from the old drive to the new one.
If I attempt to use Control Panel/Disk Management it tells me the old drive is not "initialized". Both options to initialize don't work. Please help I have some very important medical records that must be copied from old hdd to new.

A:Cannot read hdd from old desktop Win7 32bit on new laptop Win7 64bit

Have you tried connecting the old hard drive to the old computer using the SATA connection then connecting your laptop to your network before copying the files over?

Read other 4 answers
RELEVANCY SCORE 52.4

Hi all,

Hope all is well. I just purchased a Toshiba Satellite P855-S520 laptop with Windows 7 Home Premium (64-bit), SP1 already installed and would like to upgrade it Windows 7 Ultimate.

I had already purchased a retail version for Win7 Ultimate before (the full version not the upgrade) and would like to use this for the upgrade.

I looked around the forums for some advice and found some very useful stuff but I would appreciate if someone could help with the following. My apologies if the answers were posted already. Must have missed them.

1. I read about the Windows Anytime Upgrade feature. Will AU work with the full Win7 Ultimate retail key or does it specifically work with an upgrade key?

2. If I use the AU and it is successful, will the new Win7 Ultimate key be converted to an OEM version as well? The full-version retail key I have gives me the right to install this to 3 computers. I do not want to lose this right since I may use it for different computers in the future.

3. Is it better to go for AU or a clean install of Win7?

Since I just purchased the laptop, I have no personal data or programs installed so I do not have to worry about losing data. However Toshiba has certain software installed with the laptop. My understanding of a clean install is that everything will be wiped clean and then necessary software e.g. drivers, etc... need to be installed again. On the other hand, once I upgrade to Ultimate perhaps some of this software will becom... Read more

A:Upgrade from Win7 Home Premium 64bit to Win7 Ultimate

What`s the need for the upgrade ? Save your Retail Ultimate for another build. But someone will be along to answer your question.

Read other 8 answers
RELEVANCY SCORE 52.4

Hi folks.

I have searched through the various threads that deal with this topic but have not seen anything that deals with this specifically.

I have a custom built computer I put together last year. I installed Win7 32bit at the time because I didn't want to bite the bullet and reinstall everything. That time has now arrived.

My computer has:

i7 Core 960 2.67GHz
8GB Ram
1TB HDD (Win7 32bit installed)
600GB HDD

I purchased an OEM DVD of Windows 7 Home Premium 64bit and an Intel 180GB SSD drive.

I want to install the SSD drive on the computer and install Win7 64bit OS as a DUAL BOOT. This way I will be able to choose to migrate my applications at my own pace. As I install a 64bit version of my Photoshop CS6 for example, I will delete it in the 32bit OS once I have all my settings, brushes etc. moved over.

Should I ?

1. Install the SSD and get it recognized by the BIOS and the 32bit OS.
2. Boot from the DVD of the 64bit OS and choose the SSD as the location of the installation.
3. Reboot the computer after installation complete

and at that point I should get the dual boot screen?

The above is how I understand the process based on some tutorials I've seen for dual booting XP and Vista. Does this work for Win7 32 and Win7 64?

A:Dual Boot Win7 32bit and Win7 64bit on a second SSD drive

Easy - install the SSD and disconnect all the HDDs. Then install Win7 on the SSD and make the SSD second in the boot sequence (first should be the CD/DVD reader). Then reconnect the HDDs.

When you want to boot from your 32bit system, temporarily change the boot sequence (usually via F12 at power-on).

Read other 9 answers
RELEVANCY SCORE 52.4

Just wondering if it would be possible to backup a Win7 32bit system, install a Win7 64bit system then restore the 32bit to the 64bit system?

Simon

A:Macrium Reflect: Restore Win7 32bit to Win7 64bit?

NO -- a clean install is required to move from one to the other. IF you restore an MR backup over an install, it replaces the entire contents of the partition. So basically, you would be going back to the version that you saved to backup.

Read other 3 answers
RELEVANCY SCORE 52

I am looking at moving my C: (OS) hard drive from a Win 7 machine to a new Win 7 machine. The only reason I am doing this migration is due to a new motherboard with processor. Utilizing both the native Win 7 tools and Norton Ghost it appears that I should be able to do this. AM I to naive believing this?


However, I am still not sure how I am supposed to load the new mobo drivers once the new HDD is booted up in the new machine. Additionally, the HDD is 120 Gb and the new HDD is 500 Gb and I am concerned that I am going to run into issues due to the size difference.


Does anyone have an recommendations or tutorials on this topic?




Thank you.

A:Cloning Win7 to new motherboard

Sysprep the current installation, clone the disks, then expand the partition with disk management after booting new motherboard.

Read other 6 answers
RELEVANCY SCORE 52

I am working on a Dell Studio 1745 running Win7 64 Home Premium. I need to run a piece of hardware (Tascam US122) that is incompatiable with the 64bit OS. My plan is to partition the drive and install Win 7 32bit on the new partition so I can run the mentioned hardware. I've done this on another machine (Dual Boot XP and Win 7) and ran into a problems with the bootloader. I learned to install older OS FIRST because of that. I'm wondering if installing Win7 32bit on a current Win7 64bit machine will cause a similar problem with bootloaders? I'd rather not have to mess with the bootloaders, but I really need to run this hardware. And, since this is a Dell, with touchscreen, and most IMPORTANTLY, a friend's computer I want to be 100% sure I'm not going to cause issues I can't fix.

So, again, will installing Win7 32bit on a new partition of a Win7 64bit machine cause problems with the bootloader, or any other foreseeable problems?

Thanks a bunch!

A:Installing Win7 32bit on Win7 64bit machine?

http://tascam.com/content/downloads/products/311/US-122_Win_driver_3_40_notes_E.pdf

This says that the drivers work with 64-bit Vista. Have you tried using the Vista driver?

Driver: http://tascam.com/content/downloads/products/311/US122_Win_3.40f.zip

Read other 10 answers
RELEVANCY SCORE 52

Hi,
I'm presently running Win7 Pro 32bit on an Intel Core2Duo 2.4Ghz 775 socket.

I've just purchased a i5 760 processor, an Intel H55 chipset Mobo, and 8GB of ram.

My copy of Win7 Pro 32bit was acquired through the college I was attending.
I have the installation disk and the license number.

When I reinstall Win7 Pro on my new set up, what do I need to do to make it a 64bit install?

I plan to use to the same installation disk and license number.

thanks
Mitch

A:upgrade from win7 pro 32bit to win7 pro 64bit with same licence

You will need the 64-bit DVD for a clean install
Clean Install Windows 7

Read other 4 answers
RELEVANCY SCORE 52

OEM SSD Win7 64 bit on C: I installed a new SSD with Win7 64bit to use as a test drive, but I can't boot to it. I can see the new SSD drive when I am in C:. It is labeled as E: I never gave it a drive letter. Does Win7 issue drive letter sutomatically? When I go into the BIOS at boot up I can't see it. I can boot to it if I remove the power to the C: so it can only boot to the new SSD.

A:Dual Boot issues.. Win7 64 bit & Win7 64bit

Post a snapshot of a full screen Disk Management:

To open Disk Management, press Windows key+r, type diskmgmt.msc and press Enter or click GO. Make it full screen.

See here: How to Use the Snipping Tool in Vista - Vista Forums (says it's for Vista but also works with Win 7).

Once you have the image saved, click on the Paperclip Icon next to the Smiley Icon.
In the Manage Attachments window, click Browse and navigate to where you saved the image and select it.
Click the Upload button.
Close the Manage Attachments window.
Click on the Paperclip Icon again and select the image you uploaded. It will be placed in your post.

Read other 9 answers
RELEVANCY SCORE 51.6

I'm looking into purchasing a Lenovo T440s with a 500GB HDD. My plan is to separately purchase a 128GB SSD, swap the Win 7 OS/programs from the existing pre-loaded 500GB HDD over to the 128GB SSD and use the 500GB HDD (in an enclosure) as an external drive for storing data and use the SSD for faster program loading etc.

How doable is this...is there a straightforward process to it or is it fairly complicated? (for someone who does this kind of stuff only if I really need to )

Thanks!

A:Cloning Win7, programs, data to another HDD

This software works like a charm: Macrium Reflect FREE Edition - Information and download

Read other 6 answers