Over 1 million tech questions and answers.

ethernet and wireless together

Q: ethernet and wireless together

should I enable the wireless when I want to use the ethernet, my wireless works fine, but when I try to connect with ethernet, either no connection or connection drops after a short time, It is a dell desktop with windows xp,with netgear switch, and comcast modem,with mac airport, I need to get my ethernet high speed working that I pay for. PLEASE someone help

RELEVANCY SCORE 200
Preferred Solution: ethernet and wireless together

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: ethernet and wireless together

If I am going to use ethernet for an extended time I remove an external wireless adapter or switch an integrated wireless off. But that's to extend the life of the unused component and to save the battery if on battery. If you are using a PCI wireless card with the desktop then disabling it is probably the best you can do. But that is not going to impact your ethernet usage, so it is really your choice.

Please show the following for when you have an ethernet connection and for when it has dropped ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.

Read other 3 answers
RELEVANCY SCORE 47.2

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

A:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

A:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

Read other 6 answers
RELEVANCY SCORE 41.6

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

A:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

Read other 1 answers
RELEVANCY SCORE 41.6

Hi everyone

I dont really know whether this is really relevent, but I was just wondering. If I have both ethernet cable and wireless on one computer as 2 networks. Can I join up both of them to increase my internet speed or somthing. I tested both of them seperately and the ethernet cable was much faster than the wireless. My router is next to my computer. Can I have some tips. I will be putting some screenshots later.

Thanks in advance

A:What can you do with both ethernet and wireless??

  
Quote: Originally Posted by mw2


I tested both of them seperately and the ethernet cable was much faster than the wireless.


Surprise, surprise...

Read other 9 answers
RELEVANCY SCORE 41.6

Hey all im new here, and this is my first post.
First of all I have a DSL connection through my provider. I then have a NetGear FM114P wireless firewall/print server (router ) attached to the modem.

My computer is currently hardwired through the ethernet port in the FM114P router with two other computers connecting by WiFi.

What i was thinking, was loosing the ethernet cord and turning this computer in to a wireless connection like the other two, but if i do will i loose speed? This computer currently gets between 700-950 kbps., depending on traffic.

thanks
mausie
AKA foufymaus
 

A:Ethernet -vs- Wireless

Read other 9 answers
RELEVANCY SCORE 41.6

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics, -1988 Mb
Hard Drives: C: 465 GB (273 GB Free); E: 5 GB (0 GB Free); F: 143 GB (0 GB Free);
Motherboard: MSI, H67MA-E35 (MS-7680)
Antivirus: Avira Antivirus

I used to access my home wireless with a Netgear N150 Wireless USB adapter. The device still works, because I use it for Roku, but my computer can't access the wireless network with it. As a replacement I installed a TP-Link 300Mbps Wireless N PCI adapter (TL-WN851ND). That hasn't worked from the start. During the course of trying to fix the problem, I changed at least 10 different settings, and none of them worked. Now, I've lost track of all the changes I made. What I want is to erase all of the previous settings and connections and act like my computer is fresh out of the box and has never been connected to the internet before. The TP-Link is what I want to use. Not knowing as much as everyone else on here about computers, I am assuming that the Netgear and TP-Link aren't the problems, and it is instead something with my computer. Is there some type of checklist I can go though step by step to see exactly what the problem is? I don't know if there is physically something wrong with my computer that I can fix by buying a... Read more

Read other answers
RELEVANCY SCORE 41.6

I've just moved into my Halls at uni in London. We have to use a CAT 5E ethernet cable to connect to a socket in the wall. When we open a web browser we have to enter a username and password to be able to go online. I was wondering if there is any bit of Hardware which i could plug into the ethernet wall socket which would then broadcast that ethernet connection as wireless and if so if it is possible to protect the connection so others cant use the WIFI.

thanks
 

A:Ethernet to Wireless, is this possible?

When we open a web browser we have to enter a username and password to be able to go online.Click to expand...

That probably means that they want to restrict usage to one computer per connection and do not want wireless networks set up. So, please check with the IT department before doing anything, as it's not very hard for them to detect violations.

On the assumption that you will not attempt this unless it falls within the rules, you can use a Wireless Access Point (WAP). Use encryption, preferably WPA2-PSK, AES, but at least WPA-PSK, TKIP. Use a passphrase that cannot be guessed and does not include dictionary words.
 

Read other 1 answers
RELEVANCY SCORE 41.6

So my wireless works well and fine, but the only problem is is that it disconnects time from time and i'm trying to download a 15 gb file that has no resuming capabilities. I want to use my ethernet connection rather than my wireless, but the ethernet (local area connection) isn't showing when I go to Control Panel/Network and Sharing Center/Manage Network Connections. I only see Wireless Network Connection. I have a router and a modem. the router is a linksys cisco. And my cable modem is linksys wrt45 or something. How can I fix this? My other two computers are using the ethernet cables fine.

A:Wireless but no ethernet

Download and run VistaForums SysInfo Tool (Select All and export to a file) on the laptop you're having trouble with, and upload it.

Ed

Read other 4 answers
RELEVANCY SCORE 41.6

So I just bought myself a new laptop (hp dv6910us) and I'm enjoying it thoroughly but I have a very basic question about what to use in terms of internet. In my apartment, I can easily connect to the internet through my ethernet connection or through the wireless. Both are smooth, fast connections. In terms of increasing the lifespan and battery-life of the computer, should I stick primarily to connecting through the ethernet or through my wireless connection? I have an Atheros AR5007 802.11 b/g WiFi adaptor and my processor is an AMD Turion X-2 TL-60 2Ghz with 3.00GB RAM. Running windows vista 32 Bit. It's a general question, not a pressing issue so answer at your leisure. Thanks.
 

A:Wireless vs. Ethernet

Not sure if anyone has ever bench marked something like that. But my gut feeling is that the wireless would draw a little bit more power but I have no evidence to back that up.
 

Read other 3 answers
RELEVANCY SCORE 41.6

Here's something that is causing massive loss of hair.....

My PC is connected to my router with a wireless card. I also connect my PS2 to my PC using an ethernet connection (the ps2 is "modified" and I use this connection to play music and video thru the ps2 to the TV).

Everything works fine with one exception. It seems like the wireless is not getting a DNS. To obtain one, I have to disable the ethernet card, connect to my AP, then enable the card. If I lose my connect with the AP (which happens sometimes, it's on the other side of the house and the signal is a little weak), then when it reconnects I have to do the whole disable/enable thing.

It's not a huge deal, but I do like my stuff to work properly and usually things like this are not problem for me, but this one really has me wondering. Anyone have any ideas?

Here's my ipconfig /all if that helps. What's odd is the ipconfig is *exactly* the same when I can connect and when I can't. So maybe it's not a DNS issue, but something else. But I am unable to connect to any web sites until I disable and re-enable the ethernet card.

Windows IP Configuration

Host Name . . . . . . . . . . . . : HAL
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Wireless Network Connection 3:

Connection-specific DNS Su... Read more

A:Ethernet and wireless on same PC

Read other 6 answers
RELEVANCY SCORE 41.6

This is, perhaps, an extremely silly question, easy to answer as the Techguy says! I have been using a desktop with Ethernet LAN (Landline) for years. Now, I have a Dell Studio 15 Laptop with Wireless output signal. My question is, How do I connect the two, so that I can use the Laptop too through my land-line broadband connection? Do I use just a wireless router in between? Any type of Wireless Router, or, any specific type? Do I need to change anything in my desktop LAN setup?
 

A:Wireless to Ethernet LAN

Read other 6 answers
RELEVANCY SCORE 41.6

I have a Linksys BEFW11S4 4 port wireless broadband router with 2 x wireless laptops that can see each other and share files fine. I also have a PC which is hardwired to the router. All 3 machines have an IP address from the range I configured and all 3 machines can access the internet. The problem I'm having is that my hardwired PC cannot see the workgroup I have set up so therefore it can't see the 2 wireless laptops. The 2 wireless laptops can see the hardwired PC but cannot connect to it to view the shared folders.

I have switched all firewalls off, changed lots of config in the router, reset it to default, rebuilt my hardwired PC, pulled out some hair, changed network settings all over the place but just cannot get the hardwired PC to see the workgroup.

Any suggestions anyone ! !
 

A:! ! ! ! ! Ethernet Can't See Wireless ! ! ! ! !

Well, as long as all three are getting DHCP addresses from the same network, then the router isn't to blame, so, get it configured and leave it alone.

You say you've setup a workgroup for the laptops. That desktop machine also needs to be a part of that same workgroup. Then, you need to have the same username and password combination on the three machines, and then the desktop should be able to share files with the laptops.

And you definitely want the firewalls disabled until you get things working.

-Scott
 

Read other 1 answers
RELEVANCY SCORE 41.6

A little confusion here - When I log onto my Verizon router page (that 198.xxx thing), I show many menus but the following 2 have me a little confused. One says "network connection" type is: Ethernet - I do have a yellow cable coming out of my Actiontec router to the pc so I get that. Another menu says "wireless settings" and this says "wireless" which I have set to WPA and the mode is 802.11g "only". Is this system wireless or ethernet or both? I would like to do the pc to tv connection for netflix movies at some point.. Am I all set with this configuration? (knowing I have to buy a box of some sort, Roku or Apple or something) and if I do have a wireless connection, can I connect the two without cables running from one to another? Hope that is all clear. Thanks in advance.
 

A:Ethernet or wireless?

Is this system wireless or ethernet or bothClick to expand...

both

you have a wireless router - and so you can connect to the router with a cable as you currenty are doing and other devices PCs etc or your PC can also connect with wireless
I would like to do the pc to tv connection for netflix movies at some point..Click to expand...

someone else will need to answer the netflix service

from what I can see on the website
http://www.netflix.com/HowItWorks#faq1
you can watch via a PC


http://www.netflix.com/HowItWorks#faq1
Can I also watch instantly on my PC or Mac?

Yes. Simply press Play on any TV episode or movie to instantly watch it online on your Internet-connected PC or Mac.Click to expand...

so you can watch directly on your PC without any other device - and then if you have your PC video output connected to the TV you should be able to watch on TV via PC

whats the make and model of TV
- what outputs do you have on the PC video card ?
- what inputs do you have on the TV

if you have HDMI on both - then you should be able to use that - although for some copyright materials you will only be able to display on the TV and not two monitors
 

Read other 3 answers
RELEVANCY SCORE 41.6

I'm having problems connecting my PC via ethernet cord to the internet. We just got cable today and one of our PCs has a wireless card, when the other one doesn't. My computer is the basic one with the specs in my profile. It only has a dialup modem. I don't know if I have to configure something to the router or modem, but when my computer is hooked up to the router(the internet still doesn't work then) all other computers on the network won't connect to the internet.

Any help will be appreciated!
 

A:Pc not getting wireless through ethernet

Read other 16 answers
RELEVANCY SCORE 41.6

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

A:One wireless, one Ethernet, can I use both?

Read other 11 answers
RELEVANCY SCORE 41.6

Hi

My W8 PC is connected to the Wireless Router by Ethernet Cable, the PC also
has Wireless connectivity; is it possible to connect to the Router with both at t
he same time and if I do will that improve internet speed?

Thanks

Daniel

A:Ethernet and Wireless

Your internet speed is determined by your provider and the package you have, it is irrelevant how fast your connection to router is as long as it is at least a little faster than speed to the provider. So you can not change the internet speed above what provider gives you.

Read other 2 answers
RELEVANCY SCORE 41.6

Hi, I have a Pavillion dv7-1129 wm laptop. With Windows Vista Home Premium ... Amd Turion (tm) X2 dual-core moble Rm-72 2.10 GHZ...Ram-2814... 32-bit Operating sytem
Can anyone provide me with the drivers for the Wireless and Ethernet connections

Drives for a Realtek RTL8101 Family-PCI -E Fast Ethernet NIC (NDIS 6.0)

Thankyou
 

A:Ethernet and wireless

Read other 12 answers
RELEVANCY SCORE 41.6

Hi there,
I'm having troubles with our new router. I can connect via ethernet but not through wireless. I'm certain it's an issue with my laptop, as I've managed to connect several other devices without any problems. Any help would be appreciated as I've tried everything I can think of.

Below is the result of "ipconfig /all" with the ethernet cable connected.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . :... Read more

A:Ethernet Yes, Wireless No?

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last couple of years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.
If you post back the make and exact model of the router - we can advise how to disable the wireless security

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

If you post a reply here with the Make and EXACT model of your PC, along with the windows version you are running. we will see if we can find a link to the driver and will post a reply with the link here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved t... Read more

Read other 3 answers
RELEVANCY SCORE 41.6

hi, i am using a wireless connection but to play bf2142 well i need a wired connection. i have got an ethernet wire going from the wireless router to computer, and it works [i disable the wireless connection and i connect to the web through the wire]. but i want to use my ethernet wire as my PRIMARY way to connect to the internet, but still want the wireless connection active for my computers upstairs to connect to the web.

does this make sense?

is this possible?

thank you

denny
 

A:using ethernet instead of wireless???

Read other 15 answers
RELEVANCY SCORE 41.2

My wireless was working fine... didn't touch anything and then it stopped.

My roommate can connect fine and I can connect with the ethernet cable.

I ran the Xirrus and it's not detecting any networks and i'm right next to the modem.

I did a system restore, ran a virus scan and no dice.

Any suggestions?
 

A:ethernet connection but not wireless

Read other 7 answers
RELEVANCY SCORE 41.2

Hi. I cannot connect to my wireless internet, however I can connect when using my ethernet cable. I don't usually have problems connecting to wireless and my other roommates are using the wireless without trouble, so I believe it is my computer. Help! Thanks!
 

A:Can connect with ethernet but not wireless

Here is the support and driver downloads site for the Acer Aspire 4720Z laptop/notebook.

I suggest you add and save this site in your browser favorites/bookmarks list so you can readily refer to it when needed.

You may need to reinstall or update the driver for the wireless device.

----------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 41.2

I have a cable modem hooked up to my router, and the ethernet cable from my router to my computer. internet and wireless were working just fine for about a month up until yesterday. it just stopped. now, either my ethernet will connect or my modem, but never both, which will not allow me to have wireless. i've tried resetting both the router and modem, but no luck. any help is appreciated. thanks
 

A:wireless and ethernet problem

Read other 7 answers
RELEVANCY SCORE 41.2

Hello I have been having a problem with my ethernet work but wireless not. It basically says acquiring IP address then says limited connectivity. Im using a Dell Vostro 1520 laptop and a dlink router. Thanks for your help.
 

A:Ethernet works but wireless does not

Check.
You have no conflicting wireless managers installed try using only the Windows built in tool
Remove any unneeded wireless networks from your system.
Remove and re add your network back in, ensure all settings are configured correctly. Connect firstly with the cable and note down everything exactly. i.e. SSID, Security type, encryption type, security key.
If it still dosent work look into updating or rolling back the drivers for your wireless card.
 

Read other 1 answers
RELEVANCY SCORE 41.2

Hello all-

I am at my family's vacation home. For several years we have stuck to using dial-up here, part of the whole isolation thing you know, but recently decided to upgrade to the most basic DSL. I set up the connection and connected the modem (Lynx L-220) to a wireless-b router (Linksys BEFW11S4) and everything was working great for about, oh, maybe an hour. It started getting unbearably slow, worse than dial-up. So I connected to the router with an ethernet cable and it's fine, most of the time. I then disconnected the ethernet and surfed wirelessly, and it was also fine. So the wireless only would work properly if I had just used the ethernet. ?????????? That's odd.......

I tried pinging a few sites on ethernet and wireless to see what happened. I opened Firefox, tried loading a page (of course it wouldn't) and then typed ping www.google.com in command prompt. It timed out a few times, then get a reply and, low and behold, the page suddenly started loading. Now I'm really confused. The internet works sometimes, the wireless works sometimes, and the ethernet works sometimes. ?????

I'm certainly planning to call tech support, but as that is a big thing to attempt, I thought I'd post here first and see if there is anyone out there who perhaps can help me.

OMG OMG OMG

Edit: I have tried pinging and loading pages only connected to the modem as well. It still doesn't work properly. I guess it's not the routers problem, maybe ... Read more

A:Wireless fast only after using ethernet...

Read other 16 answers
RELEVANCY SCORE 41.2

Hi - I just bought a notebook with built-in wireless mobility. I have Road Runner as my ISP on my desktop unit. Is there any other equipment I need for sharing my Internet connection with my notebook?
 

A:Wireless notebook & ethernet

Read other 6 answers
RELEVANCY SCORE 41.2

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethnet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

A:New install no ethernet, but can get wireless

Read other 11 answers
RELEVANCY SCORE 41.2

hey,

I am trying to use my wireless router to convert my wired connection to wifi. i have two laptops in which i would like to use the wireless connection. Only router and one laptop have ISP mac registration. I would like to use my router as a bridge to conect to internet and then to trasmit wirelessly, so that i can use internet in both the laptop remotely. Is it possible?

currently one laptop is connected to internet and that too wired connection. it is having a static ip and gate way. How can i use this static ip and gateway so that the router makes the connection and later assigns a new ip to my laptops.

if you are still not clear about the question I can give you more details

can anyone please help me in this......

A:converting ethernet to wireless

I think I can help... but your not being very clear.

As I understand it, you have a Wired Router which is connected to the Internet. You want to connect a Wireless Router and use it as a switch, to transmit the data from the wired router to 2 wireless laptops?

So it would look something like this:

Internet>Wired Router>Wireless Router>Laptops

Is that right?

Read other 5 answers
RELEVANCY SCORE 41.2

Im sure this is something really simple but basically with my laptop i can connect to my router wirelessly fine but when connected via an ethernet cable web pages dont load although everything states its connected???
When you attempt to load a page the load bar starts to work in the bottom right hand corner to indicate its loading but doesnt go any further than halfway and never loads?
My security programme is ESET and have attempted disabling the personal firewall in the hope this may help but no joy.
Have tried another laptop connected up via ethernet cable and that laptop worked fine loading pages problem free??
To me this seems odd but could be relatively simple as it states connection, can be prooved to work fine on another laptop so it must be something on my laptop stopping it going any further??
Could anyone please lend some much needed advice pls? would be much appraciated
thanks
Paul
 

A:Can connect wireless but not via ethernet ?

Try these simple tests using the wired connection only with the wireless disconnected.
Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no netw... Read more

Read other 1 answers
RELEVANCY SCORE 41.2

This seems to be a common problem but after trying all that is out there (repairing and reseting TCP/IP Winsock, random You-Tube videos) I'm stumped. Here is my info from my cmd's IP config when I'm online and when I'm offline listed after that.

*ONLINE*

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lisa
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-1D-72-3D-89-61
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::48a5:e32d:4169:1d0c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.84(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, July 24, 2011 10:55:52 PM
Lease Expires . . . . . . . . . . : Monday, July 25, 2011 10:55:52 PM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 268442994
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-0F-F2-AF-24-00-1D-72-3D-89-61

DNS Servers . . ... Read more

A:connect to ethernet not wireless

Read other 7 answers
RELEVANCY SCORE 41.2

hi i just bought a new laptop with windows 7 os. i dont know why but my ethernet (MARVELL YUKON 88E8055 PCI-E GIGABIT ETHERNET CONTROLLER) connection speed is just about the same as my wireless (INTEL WIFI LINK 5100 AGN) i am so confused why my ethernet connection is so slow. With my older computers, ethernet was at least 2x faster...

A:Wireless and ethernet speeds are the same pls help

I'm afraid i don't know anythinge else about your setup.
Is the wireless router connected directly to the Ethernet router? are they combined? what are the brand and product names?
is this DSL, Cable, or Optical Fiber internet?

also, could it be that the other two computers were limited wirelessly to the speed of a WIfI G network, while both the router and the new computer are WiFi n compatible?

Read other 6 answers
RELEVANCY SCORE 41.2

hi...i have a macbook and a pc.....and i have subscribed in 2 internet isps. one of them is just wireless network and the other one is DSL ....i was wondering is it possible to use both of them in my mac at the same time and reffer some of applications to one and others to otherone?
 

A:use wireless & ethernet in mac in the same time

This thread, post #17 for Windows. Don't know if it would work for Mac.
http://forums.techguy.org/networking/849382-solved-how-do-i-specify-2.html
 

Read other 2 answers
RELEVANCY SCORE 41.2

Yesterday, due to an additional guest to our house, I had to up and move all of my possessions into another floor and section of my house. I have only one wireless device, and that is laptop. Other than that, I have

Desktop PC (windows 7)
Xbox 360
and a HP C5100 series printer
that all require an ethernet connection to my router... which is back on the other side of the house. I cannot snake a 60 foot ethernet cord to each of these devices. My router is an Apple Extreme bought less than 6 months ago.

How do I give my network devices internet access from across the house? Is there some wireless hub I can buy that translates wireless internet back through ethernet cords that I can set up over this side of my home?

Any questions for specification please ask. Thanks in advance

PS - If I buy a wireless card for my desktop PC, only a year old, would I be able to use that as a router in and of itself? It has extra ethernet ports on the back, so could I hook up my Xbox 360 to it and get network access for my Xbox or printer? Are there any steps to do that?

A:Wireless and Ethernet solutions

Hello and welcome to the forums.

There are many ways of accomplishing this, personally I solved this problem by employing an Ethernet over mains power solution using this; I find that it is almost completely reliable and you can easily stick a 4 port ethernet hub on the other end for all your devices (some of the more expensive versions have a hub built in).

It works by taking your ethernet signal and sending it through your houses power cabling and then receiving that signal at any socket in your house.

There are other options but personally I think this is one of the best.
In answer to your question about your WLAN Card being used as a router then the answer is yes.

You can set it up as an ad hoc network on any version of Windows or if you are running Windows Seven you can use this nice little program called Connectify which accomplishes the same thing but is much more versatile and easier to manage.

I hope this answers your questions.

Oli

Read other 3 answers
RELEVANCY SCORE 41.2

i have a computer that is connected to a domain.
i want to connect it with an usb wireless adapter.
the problem his that if i use the adapter i can't acess the domain because it's two different networks.

i'm working on windows 7 ultimate 32 bit
is there a way to work with both networks connected?

my computer is HP DX2300

and this is the specs:
GE115EA HP dx2300 MT PD-925 2x3.0GHz 2x2MB HT,1GB DDR2,160GB,DVD+/-RW,FastEth,WinVistaBusiness32

thanks!

A:can Wireless lan and ethernet Lan co exist?

I dont think it'll work but if anything, make sure your IP address on each network is different.

Read other 9 answers
RELEVANCY SCORE 41.2

I have 3 PC's (2 on XP and 1 on ME) and a laptop on XP. I am using a Linksys WRT54G Wireless router. The laptop is wireless. PC's are ethernet. All computers communicate with each other in common workgroup when I use an ethernet cable for the laptop. When I use wireless for the laptop, workgroup communication is lost with other machines. No porblems accessing internet with any machine, whether wired or wireless.

Suggestions?
 

A:Wireless and Ethernet in Same Workgroup

Read other 13 answers
RELEVANCY SCORE 41.2

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethernet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

A:New install no ethernet, but can get wireless

What patch level of XP are you using? If this is SP2, the classic WINSOCK patch is not correct.

TCP/IP stack repair options for use with Windows XP with SP2.

Start, Run, CMD to open a command prompt:

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reboot the machine.

Let's also see this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 2 answers
RELEVANCY SCORE 41.2

My ISP has supplied a Thompson Gateway router with wireless and 4 Ethernet ports. I connect to the internet from my desktop machine (Windows XP) via Ethernet.

My new Fujitsu Esprimo Mobile V6555 (Windows XP Professional) connects to the internet via wireless. I swapped to using Ethernet for a couple of days but when I wanted to use wireless again I failed. I tried lots of things but eventually did a “restore” to a date prior to the use of Ethernet and all was well again. I experimented and can now swap between the two PROVIDED I disable the wireless connection before plugging in the Ethernet cable.

I can understand the Fujitsu not being able to use both systems at the same time but was surprised that having them both connected should then disable the wireless connection requiring a “restore” to get it back. I contacted Fujitsu and got the following response:-

“You should always be aware of whether you are connected to the wired or wireless network, and use only one network connection at a time. Your laptop can also be connected to both networks simultaneously, which can cause network instability, slow connectivity or confusing the OS!”

I would like to occasionally “network” the Fujitsu to the desktop machine using a spare Ethernet port on the router. This would only be used for basic exchange of files, no sharing of printers or scanners, or opening a file from one machine in an application running on the other, just very basic file exchange.

After my initial expe... Read more

A:Mixing Ethernet and wireless.

Read other 8 answers
RELEVANCY SCORE 41.2

I have an Acer Aspire 7552G laptop running Windows 7 x64 that is having problems with connecting to the internet.

I started to notice the wireless and LAN connections becoming very weak, web pages would load slower, data would take longer to download, etc. This lasted for a couple weeks. As of now, I cannot get any signal, neither wireless nor LAN.

I normally use Google Chrome but have tried to connect through multiple browsers.

I have tried updating the wireless/ethernet drivers, and I have also tried uninstalling them all together and reinstalling them. Both to no avail. I have no idea how to resolve this issue and am hoping the tech pros here can help me out!

Wireless LAN and LAN vendors are both Broadcom and the drivers can be found here: Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7552G


*I am connecting to internet on a university campus.

A:Wireless & Ethernet LAN - Not Working?

How are you measureing the stregth of the ethernet connection?

Who is your ISP ?. . What Brand and Model is the Modem and Router?


Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error abo... Read more

Read other 16 answers
RELEVANCY SCORE 41.2

Hey everyone,
I have a Toshiba Satellite Laptop A305D-S6848
I previously had Vista on it and now I have installed XP SP2 on it...
Everything in the laptop seems pretty good...
I have installed mostly every drivers I had to install, but the wireless won't work and so doesn't the Ethernet port work...
when i connect the laptop to the router through the ethernet, it doesn't connect to the internet...
The local area connection thing is missing too in Network Connections...
Any help would really be appreciated...
Thanks...

A:Ethernet and wireless not working

and welcome to the Forum

You need to load the driversfor the LAN and wireless cards . .

Read other 10 answers
RELEVANCY SCORE 41.2

I network an XP box and a 98 box via wired Ethernet. Currently, a DSL connection is shared via a Zoom modem with a built-in router (5651_X4_2_2) connected to a Linksys switch (EtherFast 10/100 5-Port Workgroup Switch EZXS55W).

Just bought a laptop with a wireless card installed and want to share Internet connection and files wirelessly as already done via wired Ethenet (between XP box and a 98 box). Laptop features VISTA Home Premium.

Instead of connecting the Laptop to the switch via a patch cable (to share DSL and files), thought maybe there's a type of Ethernet to wireless adapter product that simply plugs into a port on the switch that would in turn transfer a wireless signal to the laptop. Or not?

Thanks in advance.
 

A:Ethernet to wireless adapter

Read other 8 answers
RELEVANCY SCORE 41.2

netgear n300 wireless
wnr 2000 v4

Ethernet cable connections are ok
The computers that connect wirelessly have to be restarted often to regain connection.
 

A:ethernet/wireless router

from one of the computers - can we see an xirrus screen shot please

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
( the site now appears to require a business email, and does not allow webbased emails like gmail,hotmail or yahoo etc )

Use the links below

http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html
http://www.softpedia.com/progDownload/Xirrus-Wi-Fi-Monitor-Download-99109.html

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

Run the program

A user... Read more

Read other 2 answers
RELEVANCY SCORE 41.2

I recently purchased an HP Pavillion Elite 441F computer. Upon starting it up, I discovered that although my wireless connection works perfectly, I cannot connect via an ethernet cable. I have tried multiple ethernet cables that I verified the connectivity of using my laptop. When I plug in an ethernet cable, the port shows a green light and an orange light below it. My computer recognizes that an ethernet cord has been plugged in, but shows the over the eternet box on the taskbar. All drivers are up-to-date.

Thoughts? I appreciate any help offered.
 

A:Wireless fine, Ethernet not so much...

Read other 9 answers
RELEVANCY SCORE 41.2

SInce I bought the HP Pavilion Notebook T1E85EA#A I have suffered from unreliable wifi. I had put this down to my router however I have replicated the issue on another connection/router. The wifi always shows as connected but the throughput seems to stop. I cant acess any web pages, cant access the router and unable to ping them command prompt as well. After a while it will suddenly start working again albeit the page loads will appear slow at times. Today I decided to try using ethernet as well however I have found this has exactly the same problem. Some of the diagnostics I have tried are as follows: Alternate connection method (ethernet)Alternate broadband connectionManually specifying tcp/ip settingsUpdating drivers (no new drivers found and the ones installed are from 2015), Tried from the HP software, windows update as well as in the device properties. Restoring windows back to factory spec but the issue continues. Is there anything else I can do to rectify the issue or should I send it back to HP?

Read other answers
RELEVANCY SCORE 41.2

13 Minutes Ago
Dear all,

I have read all (i think) homegroup topics here but none solved my problem.
Homegroup is working perfectly when both computer are connected to router by ethernet cable.

As soon as i unplug the cable from computer 1. None of the computer is recognizing the homegroup of the other.

I tried rebooting both computers. Leaving homegroup, rebooting create new homegroup >> nothing helps.

Both computer get internet, can connect to the router, both computer can see and share folders with each other via the the network sharing way.

Both ethernet & wireless connection show up as HOME NETWORK

I have executed the Homegroup troubleshooter on both computers No changes.

Any clues on this?

Many thanks!

Fish

A:HomeGroup OK via ethernet but NOT via wireless

I believe homegroup is tied to the network connection. Did you create a homegroup for the wireless network connection?

Read other 7 answers
RELEVANCY SCORE 41.2

I heard someone ask a question to a kid who knew a good amount about computers. The question was "If I have an empty ethernet port in my computer, could I configure my 360 to use my wireless internet?" The kid said yes, talked about some tool that is built in on XP and Vista. I missed the tool name, but instantly thought I would love to move my PS2 out of the basement, and into a room where it would actually get played.

So, the computer is connected to the internet through a simple USB wireless internet... stick. I was wondering if I plug my PS2 into the empty ethernet port in the back of my computer, how would I configure it to use the wireless network that is being picked up by the USB wireless card? I'm using Windows XP.

Thanks for the help.
 

A:Solved: PS2 to ethernet to wireless?

Read other 16 answers
RELEVANCY SCORE 41.2

Hi guys ,I am facing the weirdest problem . when I m trying to connect my laptop using wifi , my modem get rebooted ..all light gets off (DSL,WLAN,Internet) automatically . is it any malware or what ? I have updated my BIOS , my wireless driver ..but nothing worked .nd when I m connecting using ethernet its working fine , modem working smoothly .
 

A:Wireless not working, but ethernet does

Hi Sssstud,

Please let us know the message you see when you try to establish a wireless connection to the internet. Is your computer able to detect wireless networks? What version of Windows are you using and what is the model and name of the wireless router?

Thanks and regards,
Babita G
#iworkforDell


For easy access to drivers, manuals and product updates, please visit our Support Site .
 

Read other 3 answers