Over 1 million tech questions and answers.

Driver for Canon LBP-1120 Lasershot on W7 x64

Q: Driver for Canon LBP-1120 Lasershot on W7 x64

Hi,

I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
Dave
The Netherlands

RELEVANCY SCORE 200
Preferred Solution: Driver for Canon LBP-1120 Lasershot on W7 x64

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

Read other 9 answers
RELEVANCY SCORE 81.2

I am still trying to install my Canon printer, the computer finds it with P & P but sticks it in unspecified,
in USB properties (hardware) there is a driver under other devices and with USB printer support, but the printer isn't showing in "device & printers" I cant use "add printer" as I don't have the disk and it is not listed under windows update, I'm past it, can someone help me
should read Canon LBP 1120

A:installing Canon Lasershot LPB120

Install the driver. Can be found here Laser Shot LBP1120 - Canon Europe

Read other 1 answers
RELEVANCY SCORE 74.8

Please help me. I have vista 64 but i can't find any driver for Canon LBP 1120. Help me because i don't want to buy another printer.

A:Canon LBP 1120

Hi EugeneBek,

Welcome to the forum.

Sorry, the only drivers I can find for the Canon LBP 1120 are the 32 bit ones. There are no 64 bit ones for this printer yet from what I see.

http://software.canon-europe.com/products/0000524.asp

Shawn

Read other 1 answers
RELEVANCY SCORE 73.6

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

A:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

Read other 8 answers
RELEVANCY SCORE 72.8

i got this canon lbp-1120, it was wworking fine, i did an upgrade to WinXpSp2 now the printer wont install,when i plug it in,the system detect it but i get this massage found new hardware printer installtion cannot be complated. Anybody with a solution to this problem,i 've downloaded the latest drivers and upgrade but it still wont work.
 

Read other answers
RELEVANCY SCORE 62

Need a driver for 600-1120 I need ACPI\HPQ4000 specifically... is this driver included in bundled drivers? Any help appreciated











Solved!
View Solution.

A:Need ACPI\Hpq4000 driver for 600-1120

 Hi, ACPI\HPQ4000\4&15DD6BE&0  Original Fintek eHome Transceiver Driver ftp://ftp.hp.com/pub/softlib/software11/COL35151/pv-87085-1/sp49795.exe http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-600-Desktop-PC-series/4079692/model/4176607

Read other 3 answers
RELEVANCY SCORE 60.8

I recently updated to the Windwos 10 Fall Creators update (Build 1709, 16299.125), and as soon as I updated, the graphics driver failed and switched to the Microsoft Basic Display Adapter. I tried updating and rolling back the driver without success. My driver right now is at the latest version (10.18.10.4358). I already tried fixing this issue with Microsoft support but they couldn't find any solutions. Microsoft Support Link: https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/intel-hd-graphics-not-working-... 

Read other answers
RELEVANCY SCORE 50

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

Read other 2 answers
RELEVANCY SCORE 46

Have just got new computer running XP Home Edition.Printer is a Canon LBP-660. Downloaded driver from Canon website but it will not load as the error message states that I need to be using Windows 95 or 98. Yet it worked on my old computer running XP pro. Is there another compatible driver I could use? Any help greatly appreciated.
 

A:Canon LBP-660 driver

Have you tried the Windows 2000 drivers: http://software.canon-europe.com/so...ndows_nt_40__2000_r112s4954.asp?model=LBP-660
 

Read other 1 answers
RELEVANCY SCORE 46

It seems like this is an impossible task.

I work at a non-profit (read: no budget) and our 3 computers crashed. We got a new laptop donated and everything is installed on it. However, we cannot find a driver for our copier:

Canon GP 200

Which supports Windows 7 Home Premium 64 bit

HELP!

We cannot afford a new printer and everything is set aside from this... anyone?

A:Canon Driver

Hi sunnyslope, Welcome to the forums, I'm afraid doing a quick search failed to find a driver for the printer after 2005 and that was for win2000/XP Canon U.S.A. : Support & Drivers : GP200 you may be able to try to install these drivers in compatibility mode

Read other 9 answers
RELEVANCY SCORE 45.6

Just bought a new computer with windows 7, can't get Canon multipass F50 driver to download. Apparently there is an incompatability issue between the two...Who's at fault here and what can I do about it? I need the printer and can't afford a new one and I've given away the old computer. Help!
Does Canon need to update their drivers or can Windows 7 OS come to my rescue?
Should I expect an update from Canon?
Thanks for whatever help you can give.
Dave

A:canon multipass f50 driver

Well it would seem they haven't offered support since Xp. The only choice you have is to try and install the XP driver in compatibility mode.Support - Color Bubble Jet Printer - Copier - Scanner - Fax - MultiPASS F50 - Canon USA Consumer Products To install in compatibility mode follow this Compatibility Mode . Fabe

Read other 2 answers
RELEVANCY SCORE 45.6

Canon does not have drivers for Picma MP450 Vista. Does anyone know where I can get drivers for the MP450 product for Vista? Thanks, Charles

Read other answers
RELEVANCY SCORE 45.6

Hi,

I uninstalled my Canon iP3000 software, and then when I tried to reinstall it, it got to a stage in the setup process where it asks you to connect the printer to the PC. But where the PC would normally detect a new hardware device, it didn't. My guess is that the driver wasn't uninstalled, although when I look under drivers, I can't see anything under Canon. (I have Windows XP pro). The installation cannot proceed without this, and the computer doesn't detect the printer.

I had originally installed the printer software with Ashampoo, so I used that uninstaller to uninstall, but it seems even that didn't detect everything.

Could anyone offer me some advice?

Thanks!

Peter
 

A:Canon driver problem

Read other 13 answers
RELEVANCY SCORE 45.6

Does anyone know where I can get a driver for a Canon BJC 5100 printer.
I seems that Canon themselves do not and will not supply the driver for this printer to operate in Windows XP.
 

A:Need a Driver for Canon BJC 5100

Read other 7 answers
RELEVANCY SCORE 45.6

Need driver for canon LBP 1210 windows 7 x 64bit. Any ideas?

A:Canon LBP 1210 driver

Try here:

Laser Shot LBP-1210

Read other 4 answers
RELEVANCY SCORE 45.6

I can't find the driver for the Canon MF8000 printer on Windows 8.1? Can someone help me?

A:Canon MF8000 Driver?

Don the Canon site is a bloody nightmare I just need to know where you are because searching is asking me for country etc etc and I saw you results were in some language I don't know.

Read other 9 answers
RELEVANCY SCORE 45.6

I have a Canon BJC 4400 bubble jet printer that was given to me. I downloaded a driver for it (version 3.97) but when I try to install the driver a window comes up entitled "Extraction Progress" and extraction completes and then a window comes up saying "Canon Information", "all items were successfully extracted." I click OK and the next window that comes up is entitled "Readme-Notepad" in which information about things such as installation but when I close that window nothing else happens, it goes back to my desktop. I'm using Windows Me. I downloaded a driver for the same printer for my laptop which has Windows XP and it installs without any problem. All steps for adding a printer were followed. Version3.97 is for Windows 3.1, 95, 98, and Me. Any help would be appreciated.
 

A:canon bjc printer driver

is it just extracted into a temp file and then waiting for you to install
post the link to the driver page and I will have a look
 

Read other 1 answers
RELEVANCY SCORE 45.6

i have win xp and my printer does not work with it. I have tried many drivers but none work. I tried downloading the windows 2000 driver and then running bjc the printer angel but my trail for printer angel had expired. Where can I find a working windows xp dirver for canon bjc 5100?

thanks
 

A:Canon bjc 5100 driver

XP doesn't list it in it's normal set of drivers? Odd!! Try a Canon driver for a printer that is similar to yours in the defalt set of XP drivers. If you don't see an XP driver on Canon's web site they don't have one.
 

Read other 2 answers
RELEVANCY SCORE 45.6

Hi!

I have one problem. I have Windows 7 RC (build 7100, 64-bit) as my primary (only) OS. Everything works just fine but i have one "little" problem.
I have Canon Lide 60 scanner and its not working completely. I can scan winth CanoScan Toolbox but i can?t access scanner settings under control panel. And i can?t import/scan directly through Photoshop.
I just receive error message about WIA driver.

Here is screen:

I get this message when i am trying to double click on icon in control panel or in photoshop.

Any idea?

BTW: in Vista 64-bit this scanner works good.

A:Canon Lide 60 - WIA driver

Look in your old Windows VISTA/Windows directory for a file named twain_32.dll and copy it to your Windows 7/Windows directory.

Worked for me so I wish you same luck.

Read other 9 answers
RELEVANCY SCORE 45.6

Hello, I have Toshiba Satillite laptop with 32 bit Vista. I tried to uninstall my Canon MP160 printer driver and install it again. It said I have a printer drive installed. I cannot find a printer in Control Panel. So, can someone tell where I can find the driver and delete it?
Thanks, alanrr

A:Canon MP160 driver

Hi welcome to the forum.
I am unsure why you cannot find. I press Sart > search box type printer > press enter , I have a full list of things
that are on the computer re: printers.
Control panel > I have printer, on others it's devices & printers.
If it is not under category in control panel, I would assume not installed properly.
Sorry, maybe more info is you have, what's on screen, error messages etc?

Read other 4 answers
RELEVANCY SCORE 45.6

I am looking for a XP driver for the Canon BJC5100 printer. I have seen on the canon site that they don't exist, but I didn't know if someone might have one by now. Some say that a 2000 driver will work with some tweaking but I don't know how to tweak it. Any help would be appreciated. Thanks.
 

A:Canon BJC5100 driver

Hi gobblerhuntr,
Try here !
 

Read other 1 answers
RELEVANCY SCORE 45.6

I just got an HP with Vista x64 and Canon do not offer the right driver for the MF 3110 yet. Anyone know of a fix for this problem. We have 2 of those printers in the office and i cant use them. Thank you...

Read other answers
RELEVANCY SCORE 45.6

I notice that there are a number of posting in regards 64-bit drivers for Canon printers but no other posting for the Canon LBP 5100. I purchased this printer around 12 months ago and simply love it, mainly due to the auto duplex that make printing out PDF such an easy task.

I intend building a new computer in the coming months and have more or less decided on installing Windows 7 Home Premium or Pro (Retail) 64-bit. The only major problem I can see with the 64-bit is with the Canon Printer LBP 5100, the canon website shows a 32-bit driver for Vista but no 64-bit versions. Contacting Canon NZ I received a reply stating that as far as they can ascertain there will be no 64-bit drivers for this printer unless Canon Japan decides different.

Questions please: I have been told that Windows 7 will come with a driver for the Canon LBP 5100 but can't find any information in regards this, so my question is does Windows 7 come with a driver for this printer?
If it does will the auto duplex still work?

Anyone knows how to contact Canon Japan (in English) about a 64-bit driver for this printer?

Had anyone that uses this printer come across a work around for a 64-bit driver for this printer.

A:Canon LBP 5100 64-bit Driver

Their is a similar post above yours for the lpb 5000. And from their question I can ascertain that windows 7 doesn't come with a driver for your printer since they can't be theirs to work. Even if W& did cone with a driver it would be a printer driver (just basic ) and most likely wouldn't include the applications needed for duplex. Sorry but after 7 is released on the 22 nd maybe with enough inquiries cannon will get with the program. But from their point of view i assume they would just rather sell you a newer model printer. Fabe

Read other 9 answers
RELEVANCY SCORE 45.6

i have a canon i320 printer....i lost the disk to install it....anywhere ican dl the driver
 

A:canon i320 driver

http://www.usa.canon.com/consumer/controller?act=SupportDetailAct&fcategoryid=232&modelid=8045
 

Read other 2 answers
RELEVANCY SCORE 45.6

Hi sorry for probably another printer issue but this one is a little odd.

I have a canon pixma ip3000 and when i installed it on my W7 64, windows update found it and made it work...great

Problem is my dad is having the same problem with his newer canon pixma ip4500 except windows update isnt finding a driver for it.

The canon site only has this add on driver for some maintenance utillity but doesnt actually have the main driver ! so how can we get this newer model working ?

Thanks for any advice

A:Canon driver not found with W7 ?

Download the Vista driver from Canon. You may have to install it in Compatability Mode.
If you are using Win 7 64bit get the Vista 64bit driver. Win 7 32bit get the Vista 32bit driver.

Here is the tutorial. Option One or Two.
Compatibility Mode

There are no Windows 7 drivers.

Mike

Read other 9 answers
RELEVANCY SCORE 45.6

Hello! I hope this is where this goes, If not I apologize.
I just got a Canon PIXMA Mg5422 and I have already set it up with my router and iPhone and it works just fine. I put the disk in my laptop (HP G60, Windows 7) and everything is fine. I'm a little confused though, the current installation step I'm at is a "Software Installation list". The software that ARE checked is MP drivers, On screen Manual, My printer, My image Garden, Quick Menu, Adobe RGB (1999), and Easy web-print EX. The bottom software is ''XPS driver'' and it is not checked...Do I need to check this or not? I currently don't own a camera to go with the printer (such as a canon) but I do hope to be buying a camera in a few months (not sure on brand). I'm not really sure what XPS driver means. Please help! Thanks.
 

A:XPS driver Canon MG5422

No, you don't need it, its optional.

You can read up more on it on Wikipedia: http://en.wikipedia.org/wiki/XML_Paper_Specification
 

Read other 1 answers
RELEVANCY SCORE 45.6

Hi, I just purchased a Flex 3-1120 with Windows 10 preinstalled via Lenovo.com. When I try to use the Lenovo OKR to restore the system back to the orginal state, it takes to the Windows 10 recovery options. Is this correct? Will the Windows 10 receovery option restore everything including the Lenovo preinstalled programs/apps? Thanks for your assistance!

A:Flex 3-1120 Windows 10 OKR

Iam not sure if it will restore lenovo pre installed apps but it will restore windows 10 completely......  RegardsKamal



Ask any questions or Doubts,Always ready to help.... Dont forget to click kudos if i have helped you

Read other 1 answers
RELEVANCY SCORE 45.6
RELEVANCY SCORE 45.2

Hi folks,

Her indoors is not happy!!

I have converted her Lenovo laptop into a dual boot (XP/7 32-bit) - the intention being to get everything she uses onto 7 and "convert her" to 7 too

In XP she has been happily using her wireless connected Canon MG6150 and was comfortable with its scanner driver (Scangear).

In 7 I located the printer on the network and Win 7 got the driver for it. The "printer side" of the driver is fine but the "scanner side" is very minimal (it's a WIA rather than TWAIN) and she's not a happy bunny.

Should I remove this printer and start over, using Canon's own software? Bearing in mind that this printer is already wirelessly connected, what's the best procedure - install the software first from Canon's site and then connect the printer? If so, how do I stop it from searching Windows Update for a driver?

Regards

John

A:Driver for Canon MG6150 scanner

Just to let you know, I removed the printer, downloaded the Canon software and driver, re-installed and I have a happy wife now

John

Read other 2 answers
RELEVANCY SCORE 45.2

Where can I get a Windows 10 driver for my Canon ip5200 printer? Canon doesn't make one.

Thanks,
jnix
 

A:Canon ip5200 printer Driver

The only supplier for hardware drivers (99.9% of the time) is the hardware manufacturer. If Canon doesn't offer a driver, you aren't likely to find one.
 

Read other 1 answers
RELEVANCY SCORE 45.2

I have recently bought a new base unit with Vista Home Premium 64bit installed. I have loaded all the software that came with my Canon 350D camera but Vista says it need to install new divers for a Canon Digital camera when I connect it via USB. It can not find any drivers on the install disc and recommends I install drivers for a "EOS KISS_N REBEL_XT 350D". I have checked the Canon website for the drivers and found no reference to the recommended drivers? I have found update for the software that came with the camera which I have applied but it still says it's found new hardware when I connect the camera.

The current versions of software installed are:
[IMG]file:///C:/Users/Personal/AppData/Local/Temp/moz-screenshot.jpg[/IMG]Digital Photo Professional ver 3.0.2.6
EOS Utility ver 2.0.2.6
ZoomBrowser EX 5.8.0.74

I have done a google search which brought up several sites none of which appear to work.
Can anyone point me in the right direction to get this working.

A:Canon 350D driver problem.

Hi Blakey,

I do not know if you have this one or not, but I found this at Canon:

http://software.canon-europe.com/products/0010192.asp

1. Canon Camera USB WIA Driver for Windows Vista (6.0.0)

Compatibility:
Operating system(s): Windows Vista 32bit
Language(s): English

It says it is not compatible with the x64 Vista or x64 XP though, only 32 bit versions.

Sorry,
Shawn

Read other 12 answers
RELEVANCY SCORE 45.2

Dear respective team,

I am trying to install Canon LBP 1210 printer in Win 7 64 bit. I have searched driver in vendor site but was not success to get. Is there anyway to install above printer in 64 bit platform.

Your support is highly appreciated.
 

A:Canon LBP 1210 driver for win7 64 bit

check here this is the only one i can access from the canon site

http://support-au.canon.com.au/P/se...download&filter=0&tagname=g_os&g_os=Windows 7
 

Read other 3 answers
RELEVANCY SCORE 45.2

I have two laptops and a desktop to which the laptops are wirelessly connected. All are running Vista 64 except the one laptop which is running Vista 32. The MP530 is USB connected to the desktop. I can print from the desktop just fine and, until a couple of days ago, I could print from both laptops. One laptop seems to trigger a failure of the driver to work on both the laptop and the desktop. If I restart the desktop the printer works fine until I try to print from the laptop. I have reinstalled the printer on the laptop and it prints a test page but nothing else. Any idea on how to cure this?
 

Read other answers
RELEVANCY SCORE 45.2

After six working days of jumping through hoops, I have finally managed to install a brand new Canon LBP6650dn.

If anyone else is thinking of buying one in the UK, note that

(a) the supplied software disc is only compatible with Win 7 32bit

(b) Canon UK online and telephone support were basically no help and the drivers on the UK site do not work

(c) via a contact in Canon UK, I finally figured out the answer.

What you do is go to Canon U.S.A. : Consumer & Home Office : imageCLASS LBP6650dn
and follow the instructions.

This will install the printer as an "unspecified USB device".

Right click on that, run Windows troubleshooter, and when it tells you that the driver is missing, click on "Fix this problem".

Everything will then be sweetness and light - at least until you try to override the printer defaulting to single-sheet feed. But that's another story (which as yet has no end) ...

A:Canon LBP6650dn driver saga

  
Quote: Originally Posted by danfoto


What you do is go to Canon U.S.A. : Consumer & Home Office : imageCLASS LBP6650dn


Which driver do/did you use? There are 3 there and they all have this note...






Quote:
Before starting the driver installation, connect only the LAN cable first, do not connect the USB cable at this time.
This is necessary for your printer to acquire IP address automatically before you start the driver installation and enable driver installer function.

Read other 7 answers
RELEVANCY SCORE 45.2

Hey,

Just after some help with the MP780 on 7 x64.

The printer is plugged in via USB to another machine on the network. On the 7 machine I am running through the add printer wizard, which finds the printer and looks for drivers.

The first problem is that it can't find the MP780 drivers on Windows Update, which I think it should.

After it fails there, it asks to find the inf manually. I have downloaded the drivers from the Canon Australia website but that's just an installer. I have also downloaded drivers from other random driver sites but it just gives me fax and scan infs, nothing else.

Any ideas for me?

Cheers

A:Canon MP780 Driver Issue

OK if you can install this it might work - make sure the driver package is unzippped to a folder - or just select the setup.exe file and do the following if it wont unzip - this resolves an OS mismatch when the driver wont install on w7

To install a driver OR program in compatibility mode - right click the setup.exe file - click properties - click compatibility - check run in compatibility with vista/xp etc - check run as administrator - leave the rest blank. Start setup.exe and install.

Driver page v6.20 - to download firstly click on the file, go to nxt page then - under disclaimer is download - select "i have read the instructions etc" then select download -in "red" and then click save
Canon&

If that doesnt work try installing it thru device manager and pointing to the folder the driver is unzipped to.

Read other 9 answers
RELEVANCY SCORE 45.2

When I attempt to scan a document, the canon dr-2010c pulls it in half way then stops. It freezes and nothing else can be done. If I cancel and try again, an error message tells me the driver is busy. I have also gotten an error that the device cannot be locked and another program may be trying to use it. I do not have any other scanning software on the computer. Could this be a port problem? maybe the scanner is sharing a port with something else?? I have a HP deskjet and an Okidata printer installed, but they always work fine. I dont know what is causing this conflict. any ideas???

Thank you
 

Read other answers
RELEVANCY SCORE 45.2

I pulled an old printer out of the closet to use on a new PC that I am building...just to have a printer connected to it. It doesn't work with the print driver provided with WinXP and Canon no longer supports it. Does anyone know where I might find a print driver for it. It prints test pages very nicely.
 

A:Canon BJ-200 Print Driver for WinXP?

Read other 7 answers
RELEVANCY SCORE 45.2

I have a Canon Scanner "CanoScan N1220U" that I used on XP.

Looking to get it to work for W7 46-bit.

I tried the XP driver, and it says it successfully installed but, but then a pop up comes up and says:

LaunchAnywhere GUI has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify if a solution is available.

A:[need driver] Canon CanoScan N1220U

ok I got the driver to install and now the computer knows it is there.

But now Photoshop (CS4 64-bit) does not list the scanner when I go to file import
(like it did when I had XP and Photoshop 7)

I tried using the install disc that came with the computer, but it says it is not compatible with my OS.

I did install VueScan 8.5.37, but I have to scan in the program, save it, then open the file in photoshop. I'd rather just scan right inside photoshop.

Read other 9 answers
RELEVANCY SCORE 45.2

I just upgraded my home network to a wireless system. I'm running XP Pro on the computer hardwired to the Canon Multipass F50. My laptop is running XP Home and networked via wireless. All aspects of the network operate perfectly, file sharing, internet access, etc. The add printer function allows me to find the canon over the network, I have the driver installed (because I've been using the printer in a networked (shared) mode prior to going with the wireless router. Now when I attempt to print I get an error message that states: "Failed to open printer" Canon's website simply states that there are no drivers for XP to allow for sharing this printer.

Wonderful!! Anyone have a workaround? It used to share until I went wireless.
Dan.
 

A:XP printer driver for canon multipass f50

It almost sounds like there's a permission problem with using the printer with the laptop. Try going to the printer properties on the machine that the printer's connected to. Go to the Security tab and make sure that your laptop login computer name is there and all of the permissions in the ACL list are checked. You could also try going to Network Neighborhood, go to the computer that has the printer connected and try to connect to the printer through there.
 

Read other 1 answers
RELEVANCY SCORE 45.2

I've searched this online, but I haven't found a solution that works.

Basically, I have a Canoscan FB 320P Scanner, and no installation disk. I've downloaded the drivers from the Canon website, and a few other places. Anytime I try to scan anything, I get a common error message, that reads, "The parallel port may be used by another application 0x00060800"

I also have an HP Deskjet 695C connected with the scanner.

Then it tells me that it can't find the Twain source, to re-check the connection, and try again, but to no avail.

I want to get it so that at least the scanner shows up in the control panel under installed imaging devices. I tried going into the control panel, and adding a new imaging device. It always searches for an .inf file -- is that what I'm missing? Any suggestions would be appreciated.

Windows OS: XP SP2
Dell 3000 Pentium 4.
 

A:Help with Canon Scanner (Driver issues)

Read other 10 answers
RELEVANCY SCORE 45.2

Working with a new laptop, Lenova Ideapad 510. Love it ! Migrated over my files, photos, installed Office 2010. I can print to my Canon MX922 using the Microsoft drivers. BUT, I cannot scan documents until I first download Canon drivers. Each time I do, I can download the exe. file and I can run it but then it stops with an error message. Canon Tech support thinks that there is an antivirus software blocking. All I have at the moment is Defender . They have no answer. Hoping you can guide me as you have so often.

Also, should I be supplementing Defender with anything else, like SuperAntiSpyware ?
 

Read other answers
RELEVANCY SCORE 45.2

It's on the list of supported scanners for VueScan, which works without
requiring there be good Windows drivers installed.
http://www.hamrick.com/

It worked for me on Vista 64. You can try it free before paying for it. If you like it you can decide whether to buy the program or use the money for a new scanner. You don't need a driver for the Lide 30--this program does it all.

A:Canon Lide 30 driver for Vista x64

But I don't feel I should have to pay for a driver for the $80.00 scanner I just purchased a year ago (Yes, I got ripped off)

Read other 3 answers
RELEVANCY SCORE 45.2

Microsoft tells me that the Canon Selphy CP730 photoprinter is Windows 8.1 compatible, but where do I get a driver? Canon don't have it and Microsoft don't have it. Regarding to Canon is the printer only Windows 7 compatble. I use Win 8.1 64 bit.

Peter.

A:Canon Selphy CP730 driver?

This Canon page says Win8.1 drivers are NOT available for the printer:
Canon U.S.A. : Support & Drivers : SELPHY CP730

Read other 2 answers
RELEVANCY SCORE 45.2

my printer driver has somewhta been deleted of my computer and i need another one. Plz someone tell me where i can downloads a working windows xp driver for canon 5100 series printer.

thanks
 

A:BJC canon 5100 printer driver

Read other 7 answers
RELEVANCY SCORE 45.2

Have a new Vista 64 Home Premium machine. Have a Canon i950 printer on my XP machine. Canon does not have a Vista driver for the printer. In these forums, found a post explaining there is a "driver add-on" that makes the i950 driver work in Vista.

Obtained the add-on. It requires that the "base driver" be installed (B3319MUX.EXE). When I run the driver's setup program, get "The Printer Driver Has Not Been Installed" message at the 60% completion point. Have tried the install in compatability mode and "run as administator" (Both XP and 2000), but get the same message. I am also logged in to an Administrator account.

Does anyone know of a way to get the base driver installed on Vista 64? Thank you.

A:Canon i950 Driver Will Not Install

Have you followed the instructions on installing the add-on module?

Canon i950 Printer Driver v 1.00 Add-on Module for Windows Vista - TechSpot Drivers

Read other 6 answers
RELEVANCY SCORE 45.2

Anyone aware of a fix so that windows 7 64 bit can install and use caroscan 5000f flatbed scanner?

A:canon carascan 5000f driver

I just checked here - Film and Negative Scanners - USB Flatbed Scanner - CanoScan 5000F - Canon USA Consumer Products and see there are no Windows 7 drivers for that scanner

You could try Vuescan from Hamrick if you don't find a suitable solution. The software allows you to use your scanner on a 64-bit OS through its program by providing its own 64-bit driver. It usually offers more options and tweaks over the standard software issued with the scanner. The downfall (if you want to call it that) is it will set you back $40.00 for the Standard edition or $80.00 for the Pro edition. There is a 30-day trial version as well.

List of supported scanners - VueScan Release Notes

Read other 1 answers