Over 1 million tech questions and answers.

Command Prompt command <ipconfig> not working

Q: Command Prompt command <ipconfig> not working

when I open up my command prompt and type 'ipconfig' without the ' and press enter it returns the line:
'ipconfig' is nto recognized as an internal or external command, operable program, or batch file

I am trying to find out the information I need in order to set up a static IP Address for port forwarding

RELEVANCY SCORE 200
Preferred Solution: Command Prompt command <ipconfig> not working

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Command Prompt command <ipconfig> not working

In order to set up a static ip address internally, you'll need to either tell your router or your computer not to use automatic DHCP and instead to use a specific IP address.






Quote:
Go to the System Tray (Notification Area)
Click the Network icon
Click 'Open Network and Sharing Center'
Click the 'Change adapter settings'

Selec the connnection for which you'd like to use a static IP
Right click it
Click 'Properties'
Select 'Internet Protocol Version 4 (TCP/IPv4)'

Select 'Use the following IP address':

In the 'IP Address' field, insert the IP you'd like to use.

Note: The IP you use must be within the router's list of acceptable IP addresses. It's usually a list between 192.168.1.100 to 192.168.1.255


http://social.answers.microsoft.com/...f-3656805f1844

If you're trying to set up an external static ip you'll need to pay your isp extra for one.

Read other 9 answers
RELEVANCY SCORE 118

Dear All,

I've recently upgraded my work PC from Windows 98 to Windows XP, and later this year I'll probably be upgrading the rest of our PCs in my organisation.

We have Active Directory and Exchange set up on the Win2000 Server which is quite new to me.
Every time I start my PC it doesn't connect to anything on the network. I have no Outlook, Internet or anything networked based.

To fix it I have to open a Command Prompt window and type this:
ipconfig /release
then ipconfig /renew
Then everything works perfectly.
Anyone know why this happens and how I can fix it please.

Many Thanks,

Ben Handley
VERTIC
www.vertic.org
 

Read other answers
RELEVANCY SCORE 118

Dear All,

I've recently upgraded my work PC from Windows 98 to Windows XP, and later this year I'll probably be upgrading the rest of our PCs in my organisation.

We have Active Directory and Exchange set up on the Win2000 Server which is quite new to me.
Every time I start my PC it doesn't connect to anything on the network. I have no Outlook, Internet or anything networked based.

To fix it I have to open a Command Prompt window and type this:
ipconfig /release
then ipconfig /renew
Then everything works perfectly.
Anyone know why this happens and how I can fix it please.

Many Thanks,

Ben Handley
VERTIC
www.vertic.org
 

Read other answers
RELEVANCY SCORE 104.8

Dell laptop, from the command prompt ipconfig /renew, it complains "unable to contact your DHCP server"
 

A:Solved: from the command prompt ipconfig /renew, it complains "unable to contact your

Read other 12 answers
RELEVANCY SCORE 100.8

I have a utility I run on some customers' machines that requires being run from safe mode. I already have the utility automated via batch, and would like to just run one SFX app and move on to the next machine, knowing that this app will reboot the machine into safe mode w/ command prompt, run my utility, and reboot the machine back into normal mode (the standard shutdown -r -t 01 is easy enough, but there are no modal options!). Also, if this can be done, how would I then make sure that the current user logs in automatically, rather than have safe mode stop at the log-in screen?

The utility in question is a simple "Common Software Package" which includes some software such as Reader and Flash. Some of the software included cannot be installed while an antivirus is running (at least any that have tamper-protection) due to the registry editing involved, but are completely positive in nature (one such software package simply checks the current registry vs. a backup it takes on each shutdown to look for any discrepancies, adjusted for installed software, of course). The packages do not require Windows Installer service to be running, so I have found SM w/ CP to be the best option.

Any help with this would be appreciated.

Read other answers
RELEVANCY SCORE 100.4

I have a new compaq Evo N400c with windows 2000 professional installed.

I am having trouble connecting Internet Explorer 5.0 to the web.

I have been able to connect to my ISP which is prodigy

on Explorer is get the unable to connect to this page could not find DNS server message

I have been thru the normal setups and cannot get it to work but it has worked, a friend of mine attempted to do a local ethernet setup connect for me and I suspect something got changed as that did not work either

anyway, right now I am trying to run ipconfig off the command prompt

I see it blink on the screen, but cannot read the results

I put in the | more command and it still blinks off the screen

anyone have any comments on my problems with the ipconfig screen viewing problem or my DNS problem

many thanks

great computer but not having much luck with 2000 professional

Dave
 

A:ipconfig command blinks off page even when more command is used

Hi!

Are you running IPCONFIG from the 'Run' window or are you opening a proper Command Prompt window?
 

Read other 3 answers
RELEVANCY SCORE 97.6

I am writing a VBA macro in Excel and have hit a wall. I am trying to get excel to open a command prompt and make it execute a command. The problem I am having is if I try to do anything but open another program, it throws an error back at me.

I can open the command prompt using:
Code:
Call Shell("cmd.exe" & dosCmd, vbNormalFocus)
I can also open Acrobat which is the program I need using:
Code:
Shell "C:\program files\adobe\acrobat 9.0\acrobat\acrobat.exe", vbNormalFocus
However if I simply wanted to open a PDF file, I have the code to that without opening a command prompt.

I need to open the PDF document on a specific page, and to my knowledge the only way to do this (apart from manually) is to use the command prompt. However I have no idea how to get VBA to put the command in the command prompt, hit enter and then close the prompt.

There are 2 commands that need to be executed in DOS (I'm not sure if there is a way to combine the commands)

They are:

Code:
cd c:\program files\adobe\acrobat 9.0\acrobat
and

Code:
start acrobat.exe /A "page=10=Open Actions" "M:\Full Scores\allegro.pdf
These open the pdf document called allegro on page 10.

I am completely stuck. Out of ideas. I've searched the length and breadth of the internet and can find nothing to point me in the right direction. So I was hoping one of you fine people could. Thank you so much, James
 

A:Solved: VBA Macro that opens the Command Prompt and executes a command

Read other 8 answers
RELEVANCY SCORE 96.4

Hello,

I'm trying to split a .flv file by using flvparse, which is a Windows-only, command-line interface tool. I did get through to the directory by following instructions posted on another forum, however, command prompt doesn't seem to recognize the the .exe file. I'm an absolute novice at this, any help would be really appreciated!

Attaching a CP s/s, and here are the instructions I'm trying to follow (copy pasted from the forum)

FLVPARSER

For trimming the beginning and/or ending of videos, you can use FLVParser (http://dev2.avacast.com/FLVparser.zip ).
FLVParser is a Windows-only, command-line interface tool. After you unzip it, move its folder to C:\ for ease of use. Also for ease of use, copy/move the .flv file you wish to edit into the FLVParse folder.
To make edits, you need to know the in and out points where you want the edits. Use FLVPlayer to find these points. FLVPLayer only lists times in total number of seconds, not HH:MM:SS, but don't worry, FLVParser can handle that. In the FLVParse directory create a new blank text file called: CuePointFile.dat
This is the file FLVParser uses to edit from. Open it in NotePad, and enter the in point and out point, separated by a single blank space, like so: 2525 5150
Save, and close the file. Open up the command line interface and go to the FLVParse directory: cd C:\FLVParse
In the command line, enter this to edit the flv:
flvparse.exe FileToSplit.flv CuePointFile.dat
Your file will be split into ... Read more

A:Command Prompt doesnt seem to recognize the command line!!

You are using the basic cmd, try in elevated mode
Elevated Command Prompt - Windows 7 Forums

However looking at you screen shot, you may have to check the command over carefully. There does appear to be an error in the command. With my eyes, it is difficult at times to pick out the subtle shades of difference.

Read other 1 answers
RELEVANCY SCORE 96.4

Hello everyone

Recently a problem has arisen with my system.

Previously I have been doing work that requires me to unplug my network connection and I need to check my IP address each time I plug it in again. I guess it's not set for static IP.
Anyways to do this I usually go into Command Prompt and type 'ipconfig'

Now however I just get "'ipconfig' is not recognized as an internal or external command, operable program or batch file".

The directory is the same as its always been, I can change it but it doesn't seem to matter what it is.

I've checked many other posts and is there something possibly wrong with my PATH variable? I used the command 'echo %PATH%' and it works, the list it gives is very garbled however.

I'm not sure what might have made this problem arise, but I would greatly appreciate any help.

Thanks!
 

A:Solved: Command Prompt Error - 'command' is not recognized...

Read other 15 answers
RELEVANCY SCORE 94.8

Hey guys.

Ive been trying to figure out how to make a command prompt run a command line as soon as the box comes up.

I need this to happen all from one command line. A command prompt needs to open with "echo hi" being ran as a command line.

Any ideas?
Thanks

A:Make a command prompt run a command as soon as it opens?

Hello Fmjc001,

You could create a BAT file for this. Just type in the commands into a TXT file, then rename the file extension to BAT. When you run the BAT file it will run the commands in a command prompt automatically.

Hope this helps,
Shawn

Read other 11 answers
RELEVANCY SCORE 94.8

Hi All,

I'm running a program that parses .csv files and then changes them into ._OK files. This process takes longer when there are a large number of *.OK files in the folder where the files being converted are located. To remedy this I occasionally manually run this command:


Code:
del *._OK
While pointing at the proper folder.

Is there a way to have this command continuously run, kind of like out ping -t [IP ADDRESS HERE] continuously pings a certain IP address?

Regards,

Dan

A:Command Prompt: Repeat del command continuosly

Quote:
I'm running a program that parses .csv files and then changes them into ._OK files.


I take it then the conversion program will not accept an output folder other than the current or working directory? More detail what you actually do with the output files might be helpful.

Read other 2 answers
RELEVANCY SCORE 94.8

I have Windows XP on my computer, and when I try to ping something through the command prompt (command.com), this shows up:

C:\WINDOWS\system32\command.com
The NTVDM CPU has encountered an illegal instruction.
CS:0f23 IP:010c OP:c4 f6 06 a9 02 Choose 'Close' to terminate the application

Running tracert also has the same problem.
If I try running ping or tracert through cmd.exe, it stalls and doesn't do anything. I have to close the program because it doesn't respond.
I can use ipconfig in both cmd.exe and command.com. Do I have a virus on my computer, or is there a way to repair the command prompt? I've attached a HijackThis log file.

Logfile of HijackThis v1.99.1
Scan saved at 6:47:15 PM, on 1/18/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\drivers\CDAC11BA.EXE
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\cisvc.exe
C:\WINDOWS\System32\CTsvcCDA.EXE
C:\Program Files\Cisco Systems\VPN Client\cvpnd.exe
C:\Program Files\Common Files\McAfee\HackerWatch\HWAPI.exe
C:\PROGRA~1\McAfee\MSC\mclogsrv.exe
C:\PROGRA~1\McAfee\MSC\mcupdmgr.exe
c:\program files\common files\mcafee\mna\mcnasvc.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcods.exe
C:\PROGRA~1\McAfee\... Read more

A:Solved: MS-DOS Command Prompt Problem (cmd.exe, command.com)

Read other 16 answers
RELEVANCY SCORE 94.8

Hey guys,
Earlier my internet was being slow so I went to do a ping test and CMD proceeded to tell me that it didn't reconize the command. I have done countless pings before and this was weird. If i run CMD from the run bar by typing in its Dir then i can run ping and all the other commands or if i change the dir to sytem32 and run the command it works as well. I'm thinking that the paths for the cmd files have somehow gotten messed with and I'm not really sure how to change those so any advice on how to correct those paths would be greatly appreciated. Thanks

A:Command prompt won't execute commands from cmd or command

If you go Start - type cmd then right click on cmd to select Run as administrator you can run a system file check with the cmd sfc /scannow

With Win 7 you don't need to use the Run box.

Read other 6 answers
RELEVANCY SCORE 93.6

when i run command prompt and tryto use any command it says
" 'any command i type' is not recognized as an internal or external command, operable program or batch file."
yeah any thing i type like tree or ipconfig nothing works i dont know what to do

A:Command Prompt Not Working

Do this.Run Command Prompt, type cd C:/Windows/System32Next enter any command and see if it works.IF it works, then type this command.set > C:\set.txtNow look for set.txt in your C drive and post the result in your next reply.If you are still unable to use the command prompt commands with the above instruction then do the following.Right click My Computer > Properties > Advance > click on Environment Variables.List down or post a screenshot of the thing under System Variables.

Read other 3 answers
RELEVANCY SCORE 93.6

Hey Guys + Gals

I have an issue with my computer and commands, for example in cmd if i type in ipconfig its not recognised or is any other command. I have enclosed a snapshot.

A:Command prompt not working

  
Quote: Originally Posted by devenprasad


Hey Guys + Gals

I have an issue with my computer and commands, for example in cmd if i type in ipconfig its not recognised or is any other command. I have enclosed a snapshot.


If you have changed anything in your path it may break the link. Type "path" in cmd and look to be sure the location of cmd (usually C:\windows\system32...) is included.

Alternatively are the two files ipconfig and winstat there at all.

Read other 3 answers
RELEVANCY SCORE 93.6

Hello
My command prompt is not working. when i go Start>Run and type in "cmd" in the Open dialogue box a message says "Cannot find cmd,make sure the you type name correctly and try again". But when i type in "command" the command prompt window shows but when i try to enter commands such as "ipconfig" after this line C:\Docume~1\Fiona> the nothing happens,this line shows up again C:\Docume~1\Fiona>

And also my "Folder Options" in the Tools menu is not showing....I have ClamWin as my Antivirus program....I did a full scan on my system and got "Permissions denied" on some folders....

Please help !!!!

thanks

A:Command prompt not working

TRy


http://www.kellys-korner-xp.com/regs_edits/cmd.zip

Read other 1 answers
RELEVANCY SCORE 92.4

I don't know what had happened to my CMD It's not executing any command.As far as i remember i din't tweak or played with the system files and CMD.
Today when i need to run it it din't execute the commands.

I'm attaching the screenshot also.

help me I'm in desperate need !

A:Help me to get my command prompt working in Windows 7

Do you have a system restore to before you had the problem?: System Restore

Try this tutorial out: SFC /SCANNOW Command - System File Checker. If you still have problems, do this one: Repair Install
credits: all tutorials created by Brink

Read other 6 answers
RELEVANCY SCORE 92.4

Hi,

I am on my Powerbook G4 (Mac OS X), and on it I have a special program running called VPC (Virtual PC). The program is so I can run Windows XP on my Mac OS X, basically an emulator. Here is my problem: when I am home or at school, I can't seem to run/execute remote commands from command prompt; commands such as netsend or shutdown or any other commands lke taskkill. How do I make it so I can execute commands on computers on other computers on the network I am connected to. Also aswell, when I type the commands on my mac I get something like, the RPC server is unavailable. So how do I get it that the commands will execute? Thanks.
 

Read other answers
RELEVANCY SCORE 92.4

Hello everyone, I hope you will be able to help me rather quickly with this issue due to my need for this application to work properly so I may finish my Project for school.

I have used the Ipconfig utility before with the Command Prompt window with no ill effects.

I tried to use a little while ago and recieved the basic error of not a "'Ipconfig' is not recognized as an internal or external command, operable program or batch file."

I also tried the Ipconfig.exe command in the run dialogue box on the Start tab menu. When I did this, the Command Prompt window flashes on then off. I did get a micro second glimpse of the screen and it appeared to have listed the parameters for Ip settings.

Does anyone know why this has happened and how to fix it?

I am going to see if any other commands work on the Command Prompt window.
 

A:Solved: Command Prompt isn't working.

Read other 14 answers
RELEVANCY SCORE 92.4

I have a machine with a crippled OS (Vista) so I have to use the command prompt.

When I type, NET HELP SERVICES, I get a full list of stuff with NET START BROWSER at the top.

(When I type, NET START, I get only seven items and BROWSER is not one of them. When I do this on a machine that has a fully functioning Windows OS I get 50 services running.)

When I type, NET START BROWSER, I get, "The service name is invalid." "More help is available by typing NET HELPMSG 2185." When I type, NET HELPMSG 2185, I get, "The service name is invalid", and nothing more.

I'm hitting the same wall I hit with Netsh commands. I can only be a passive observer of the machine's state except that I can launch some .exe files, like Notepad. All the while it says I am logged in as Administrator.
 

A:Net start (from the command prompt) not working

Try running "sfc /scannow" without quotes at command prompt (as admin), then "net start browser". I suggest you check for viruses or repair/reinstall vista.
 

Read other 5 answers
RELEVANCY SCORE 91.6

Hello,
Recently after a Windows defender update (about 3 days ago) I stopped being able to run file extensions from a Windows XP command prompt. (Coincidental or not I don't know)

Before typing 'todo.txt' at a command prompt brought up todo.txt in notepad.exe. Currently if I type todo.txt at a command prompt it will respond with "The system cannot execute the program specified."

typing any of these at a command prompt
video.mpg
barakus.rtf
dontwork.doc
manual.pdf
tutorial.avi
results in the same "The system cannot execute the program specified."

Double clicking on any of those files works from windows explorer.

I need them to work from a .bat file, .cmd file or the command prompt.

Anything that ends in .exe, .com or .bat works as expected from a command prompt.

I'm trying to track this mis-functionality down to:
Windows Defender,
Microsoft Update disabling file extensions at the command prompt,
or Agnitum Outpost Security Suite performing some tricky antivirus disabling file extentions type stuff.
my scripts and my sanity thank you for you time,
Bobby
 

A:File extnsions not working in XP from command prompt, Help?

Read other 14 answers
RELEVANCY SCORE 91.2

When I type:
start funny picture.jpg
in the command prompt it says cannot find file 'funny' If I say:
start "funny picture.jpg"
it only opens another command prompt with funny picture.jpg as the window's title.

How can I open a file with a space in the name?

A:Command Prompt - start command help?

Hi,
Welcome to TSF.

Type the command as follows:

Start "" "Funny Picture.jpg"


The first set of quotes ("") sets the title (for the window, this is what the start command expects for quotes normally), then the second set around the file name allows the space.

Paul

Read other 1 answers
RELEVANCY SCORE 91.2

My PC has been acting up recently. It's been running slower than usual, my games that I play are randomly crashing, and there are a couple of really random events happening.

1) Command Prompt is missing from Start Menu
2) "Run" command is missing from Start Menu
3) Internet Explorer missing from Start Menu, and every time it is opened, it pops up with the window that asks you to set up IE8 (the one that is supposed to open the very first time you start IE8)
4) Mozilla Firefox asks me to make it my "default brower" (to which I click yes) every time I open it
5) Some programs will not install correctly

I am running Kaspersky Internet Security 2010. It has popped up saying that it has detected trojans but blocked their access, and has no trace of them inside the application, as in there are no logs stating which ones it blocked, so I can't share those with you.

Any ideas as to what is going on? I also ran Webroot System Analyzer, and that came up clean, but there is obviously something going on with the symptoms listed above. Can anyone help me out? I attached a logfile of a Hijack This scan in case that helps.

SYSTEM SPECS:
Intel Core i7 940
6 Gb DDR3 1600 Mhz Corsair Dominator RAM
2x 1.5 Tb HDDs
32 Gb SSD
2x EVGA GTX 285 FTW Editons
Windows 7 Ultimate

A:Missing Command Prompt, Run Command, and Others

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers
RELEVANCY SCORE 91.2

ok here is what i am trying to do i have software called btprox which lets me lock my computer when my phone goes out of range of my desktop using bluetooth. what i want it to do though, is when i come back to my desktop i want it to unlock automatically instead of just having to put my password in. (i know im lazy but really i just want to do it cause i think its cool) now this software lets you pick programs to run instead of the lock command and stuff. what i want to know is, is there a login command for the command prompt? cause then i could just set it to run a batch file when i come in range and it will log me in.

A:command prompt logon command?

Hi -

The Task Scheduler may be of some help --> http://www.sevenforums.com/tutorials...-new-task.html

I would urge caution in 3rd party software designed to circumvent Windows 7 security and power functions. You may come home sometime and find yourself locked out of your system and a reinstall of the OS to be the only viable option.

Good Luck to you.

Regards. . .

jcgriff2

.

Read other 2 answers
RELEVANCY SCORE 90.4

Hello,

For some reason, my user account in Windows XP says that I do not have administrator privileges, even though I am registered as a Administrator. Because of this, i cannot use command prompt, disk defragmenter, and registry editor. I use Windows XP Pro, with SP2.

Please help!
 

A:Defragmenter, Command Prompt, and Registry Editor not working

bump
 

Read other 2 answers
RELEVANCY SCORE 90.4

Well when i try to open command prompt it says its being used by another program and when i try to open task manager it just simply doesnt load, any ideas?, thanks in advance

A:Command Prompt and Task Manager arent working

Sounds like a bad windows to me. Try running windows repair from the cd.

Read other 6 answers
RELEVANCY SCORE 90

Ok So I got myself into a unique bind here. I was trying to install some custom system files (for a theme) and I did it wrong and now I cant open explorer.exe . I dont want to goto a backup because this is a easy fix. (in my view). So I need to know how to run command prompt with administrative privleges from command prompt.

I am trying to do this command:

copy explorer.exe C:\Windows\

So if there is also another command I can just tack onto that that gives me admin rights to do it. I would be happy.

A:Run administrative command prompt from command prompt

On a friend's computer that also has win 7 64 bit installed, make a system Repair CD.


Boot from the system repair CD

go to a command prompt.


CREATE A SYSTEM REPAIR DISC

START | type System Repair | Enter key | Create Disc button





GO TO A COMMAND PROMPT USING A SYSTEM REPAIR DISC

1) Insert System Repair Disc into optical reader.
2) Shutdown your computer.
3) Boot up your computer from the System Repair Disc
If your computer doesn’t boot from the optical drive, then
Immediately after pushing your Power ON button,
start tapping the F2 key to get to the BIOS to change the boot order

On some computers, Immediately after pushing the Power ON button, start tapping the F12 key and choose CD/DVD to change the boot order only for this time.
4) Wait while a mini-version of Windows is loaded and finally the SYSTEM RECOVERY OPTIONS dialog appears.
5) NEXT
6) SYSTEM RECOVERY OPTIONS dialog
will search your system for installed versions of Windows.
7) select the Use recovery tools that can help fix problems starting Windows radio button |
NEXT
8) Choose command prompt from the list shown

Run any desired commands and type EXIT when finished.
Remove the System Repair Disc.
Shutdown your computer.
Power on your computer.

Read other 5 answers
RELEVANCY SCORE 90

Hello Everybody!

I don't know if this is a real issue, or just one of those "What the . . . .!!" situations. You judge.

Situation:
I was working on a batch file that combines two .txt (ASCII?) files created in Notepad to create a composite file, and I noticed something really interesting. (And yes, when someone talks about doing something and the result is "really interesting", it's time to duck and hunt cover! )

Viz.:
Assume that there are two text files: "This.txt" and "That.txt", and they contain the text "This[cr-lf]" and "That[cr-lf]", where [cr-lf] is used to indicate a newline generated by hitting the "Enter/Return" key on the keyboard.

If you look at the files with a hex editor, what you see is something like this:
The file "This.txt" contains the text "This" followed by 0x0D0A, which are the ascii codes for CR and LF.
The file "That.txt" contains the text "That" followed by the same CR and LF characters.
Note that these two files contain nothing else.

Issue I discovered:
When I execute the command copy /y ".\This.txt"+".\That.txt" ".\This&That.txt", I do not get the simple concatenation of the two files, which is what I would expect. Instead I get the two files concatenated, (including the trailing CR/LF's as I would expect), but also one additional character, the hex character for a right-arrow symbol - 0x1A. In e... Read more

A:"Copy" command in command prompt generates 0x1a artifact?

I was trying to remember from my DOS days but drew a blank. A Google Search brought up a possible solution:
ms dos - In MS DOS copying several files to one file - Stack Overflow

Read other 6 answers
RELEVANCY SCORE 90

I want to hide this. I'm running a python progam (if that matters) and it always has that open on my taskbar. I want to hide it. I don't care where it goes or how much time it takes, I just want to hide it. So I never have to deal with it. Maybe make it a system process or something? I don't know.
 

Read other answers
RELEVANCY SCORE 89.6

Hello All,
I am facing an issue here. I am doing this from years I always make my laptop as wi-fi by using following 2 commands:

netsh wlan set hostednetwork mode=allow ssid=net123 key=bla_bla_blanetsh wlan start hostednetwork



Now from last 2 days(when my ISP had made my system to pick the IP from their DHCP) whenever I am running these 2 above commands they run successfully from command prompt but on other laptop it shows YELLOW exclamation mark. 
I googled and tried many things which didn't work(eg--> checking options on device manager etc) could community please guide me here, will be grateful to experts here.

Thanks,
R. Singh

Read other answers
RELEVANCY SCORE 88.4

Before we do anything, I have been on Google for about 45 minutes combing forums, and have tried all the usual solutions to this problem.

-I've tried turning off User Account Control

-I've tried altering the security properties to "allow all"

-And I've tried the command prompt, which constantly gives me the error: "The filename, directory name, or volume label syntax is incorrect"

I am trying to delete my Windows Live OneCare backup from my external hard drive. It is a back up from 2009. Ever since Windows Live OneCare was discontinued I've been trying to delete those backup files, but I've always given up after a while and just decided to accept that as lost space on my hard drive forever. Now I need the space. Can anyone help?

What happens when I try to change security settings to "allow all" and/or delete the files or folders, I get a message saying "you need permission to do this," with only the options "Try Again," or "Cancel." "Try Again" sends me through a loop with the same message.
 

Read other answers
RELEVANCY SCORE 84.4

Hello

One question about DIR command in CMD for creating filename.doc.

I am using the following command:

dir /ad /s /b > filename.doc

Could I get as the result (text inside file filename.doc) only two parts of each line? What I mean is this:

I have the line that looks like:

C:\Main Folder\Subfolder\Subsubfolder\[blabla] example_of_folder_name

I would like to have this only:

Subsubfolder\[blabla]

In each of line (no matter how many hundreds or thousands of lines) only those two parts.

Thank you...

A:Command Prompt (CMD) DIR command

hello?

Read other 3 answers
RELEVANCY SCORE 84.4

Code:

@Echo Off
Title Sccm
cd %systemroot%\system32
call :IsAdmin


Reg.exe add "HKLM\SOFTWARE\Microsoft\CCM\CcmExec" /v "SystemTaskExcludes" /t REG_SZ /d "" /f
Reg.exe add "HKLM\SOFTWARE\Microsoft\CCM\CcmExec" /v "ProvisioningMode" /t REG_SZ /d "false" /f
Reg.exe add "HKLM\SOFTWARE\Microsoft\SMS\Mobile Client\Software Distribution\State" /v "Paused" /t REG_DWORD /d "0" /f
Reg.exe add "HKLM\SOFTWARE\Microsoft\SMS\Mobile Client\Software Distribution\State" /v "PausedCookie" /t REG_DWORD /d "0" /f
Exit


:IsAdmin
Reg.exe query "HKU\S-1-5-19\Environment"
If Not %ERRORLEVEL% EQU 0 (
Cls & Echo You must have administrator rights to continue ...
Pause & Exit
)
Cls
goto:eof
let say my computer have a the same folder in the registry but different value. by using this command it wont merge it. so how do i actually add in a merge with this ?

A:need help with command prompt command

By folder I assume you mean Key. The /f parameter you use should overwrite any current value. Are you saying that doesn't work?

If you remove /f and a value already exist for a key, you'll be prompted if you want to overwrite the current value. That's a good way of testing this.

Read other 2 answers
RELEVANCY SCORE 84.4

Hey in CMD " ipconfig " command and some of others not working
Why is this ?

Is this a virus , worm or some kind of those ?

A:"ipconfig " command not working in CMD

Do a Search for ipconfig.exe.

Is it in C:\windows\system32 ?

Is it anywhere ?

Read other 5 answers
RELEVANCY SCORE 84

I have no internet connection.
I only have Wi-Fi for internet. I have no Ethernet.

I have tried using the ipconfig /release command and get this error:

No operation can be performed on Local Area Connection* 10 while it has its media disconnected.
An error occurred while releasing interface Wi-Fi : An address has not yet been associated with the network endpoint.

I do not have a static IP address.

I also tried using the network diagnostics and got this error message:

Wi-Fi doesn't have a valid IP configuration.

I tried removing the network adapter driver and reinstalling it - no internet

I tried all netsh commands - no internet

I have no programs that control ports or firewall.


I need help please!

Read other answers
RELEVANCY SCORE 84

Hi, I'm wondering how to make a batch file so that I can launch the ipconfig /all command right off my desktop. I know how to get to the command prompt and running, but I want to just put a shortcut and/or write a batch file with just a click.

I can get the command prompt up. I open a new text file and type: C:\Windows\system32\cmd.exe and then I save the text file to .bat and I click on it and my command prompt comes up. I can't seem to get ipconfig /all to come up at all. Thanks in advance!
 

A:Solved: Ipconfig /all Command Help

Read other 6 answers
RELEVANCY SCORE 84

Cool way to do ipconfig (or any dos command)
I just learned this one today I can’t believe that after 20 or more years of playing around with computers that I have not found it sooner. Whenever I do a dos command and want to save it I do this

Code:
ipconfig /all >> C:\tcp.txt
( If want to run that command you have to run it as administrator ) Then I would open tcp.txt and copy and paste that to where I actually wanted it . Today I found out how to skip that step and send it directly to the clipboard

Code:
ipconfig /all | clip
and now I can just right click and paste it wherever I like

And here is the result


Windows IP Configuration
Host Name . . . . . . . . . . . . : Compaq
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter DLINK:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.B)
Physical Address. . . . . . . . . : 00-15-E9-A8-FF-BB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-1D-92-B0-84-B3
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration ... Read more

A:Cool way to do ipconfig (or any dos command)

Thanks for sharing. Nice find. I did not know that either.
You can use code boxes in your posts to prevent lines of info from wrapping at just the wrong point:


Code:
ipconfig /all | clip

This is how I saw the info wrap in your post:

It would be worse if I were reading your post via cell phone.

Read other 1 answers
RELEVANCY SCORE 84

I know very little about computers, but i was told that in order to make it so that my windows 7 labtop could receive wireless internet at my work, they needed my 'mac address'.

I was told to click on "Start" and then type "cmd" in the "run/search" box, and then right-click "command prompt" and click "run as administrator".

they then told me to enter "ipconfig/all" in the command prompt, and this would give me the info that i need...

and this is what shows up on the command prompt screen:

"'ipconfig' is not recognized as an internal or external command, operable program or batch file."

I have tried running command prompt without running it 'administratively', i have tried 'ipconfig /all' 'ipconfig / all' 'ipconfig', you name it... the same message shows up saying that it is not recognized as a command... any help would be greatly appreciated...

A:ipconfig/all not recognized as command - HELP!

ipconfig/all is the correct command for windows 7. ipconfig/? should list all the different syntaxes that can be used. If the PC is infected with malware the executable could have been deleted or renamed to prevent you from using it.The standard path is %WINDIR%\System32\ipconfig.exe (which usually resolves to C:\WINDOWS\System32\ipconfig.exe). Have a look and see if the ipconfig.exe file is where it's supposed to be, or do a search for it. You may have to enable show hidden files to see it.

Read other 9 answers
RELEVANCY SCORE 84

Okay, stupid newbie question (yeah, another one!)...

I was trying to look-up my IP configuration in a command prompt as instructed on the ZA board, but I did it wrong... I was supposed to type "command" in the run box, THEN type in "ipconfig /all", but I just typed in "ipconfig /all" in the Run prompt... I tried this twice before realizing my mistake. Each time, I could see the DOS window pop up for half a second and then disappear, and then nothing.

Did I mess anything up by doing this?

Did it actually do anything? (I did see the DOS window flash open for a second...)

Thanks for the help!

A:Using ""ipconfig /all" Command -- Did It Wrong

No you did not hurt anything. All you did was make a information request that could not be processed from the Run dialog box.I alway just type cmd in the Run dialog box and ipconfig /all at the prompt in the command line window.ipconfig options

Read other 4 answers
RELEVANCY SCORE 83.2

Intalled Linksys DFE-530TX+ NIC on desktop PC running W98se. Install went smooth, drivers look okay but the command ipconfig shows no ethernet adapter, IP address = 0.0.0.0, subnet mask = 0.0.0.0. The command winipcfg shows PPP Adapter but no PCI adapter. I can ping the NIC (127.0.0.1) but cannot ping the router nor other PCs.

I've seen similar problems discussed on the site but no ultimate solution - that I could find. I've seen references to the TCP/IP stack and winsock registry issues but they seem to be associated with WinXP not 98se. Would appreciate any help / suggestions. Thx, Bob
 

A:ipconfig command = no ethernet adapter

Read other 16 answers
RELEVANCY SCORE 83.2

Weird problem here.

System = Dell Optiplex XP SP3

In Network Connections, wireless PCI card is seen fine, and it can see available wireless networks.

Google Talk works perfectly but you cannot access Google or any other sites.

When you go to run "ipconfig" command...no wireless card mentioned, only LAN card.

I got a USB second wireless card - installed it with original driver - exact same problem...

any ideas - anyone?
 

A:Ipconfig command does not see wireless card x 2

Hold the Windows key and press R, then type devmgmt.msc

Please respond to all the following steps.
Under Network adapters, please tell me all the devices listed.
Are there any devices under Network adapters that have a red x displayed?
Also, are there any devices anywhere in the Device Manager display with yellow ? or ! displayed?

Next, I'd like to see this.

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 3 answers
RELEVANCY SCORE 83.2

When using a command prompt, I can no longer use the term ipconfig, as i get the message : " 'ipconfig' is not recognized as an internal or external command, operable program or batch file. "

I am assuming that this is some sort of virus that i have that will limit my command prompt... can anybody give me a hand? I have run adaware 07 and the problem was still not fixed.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:02:49 PM, on 1/23/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\System32\CTsvcCDA.exe
C:\Program Files\iPod Access for Windows\iPAHelper.exe
C:\WINDOWS\BCMSMMSG.exe
C:\WINDOWS\System32\DSentry.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\X3watch\x3watch.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Citrus Alarm Clock\citrusac.exe
C:\WINDOWS\system32\PSIService.exe
C:\Program ... Read more

Read other answers
RELEVANCY SCORE 82.4

Hello.
Windows firewall on a client is enabled and I can't disable it via "PsExec". Can I get command prompt via "WMIC" command and then run "netsh" command for disable firewall?

Thank you.

Read other answers
RELEVANCY SCORE 82.4

Hey ladies and gents

I have an issue with MS-DOS prompt on my XP SP 2 machine. It doesnt understand what "ipconfig" is. Other commands work like dir, but ipconfig does not work. Any ideas? Basically says its an unrecognizeable command or something like that.

Thanks
 

A:Solved: Problem with ipconfig unrecognizeable command

Read other 16 answers
RELEVANCY SCORE 82.4

Hi, I'm new to the forum and know just enough about pc's to be dangerous. I'm working on a friend's pc and am trying to figure this problem out on my own, but no luck so far.

When I type "cmd" (w/o quotes) in the Run box and then type ipconfig, ipconfig /all, ping command, etc., I get the following message: ipconfig (and the others mentioned above) is not recognized as an internal or external command, operable program or batch file.

I'm doing this cuz she's been having intermittent connection problems and I thought I might try this to see if I can do some diagnosing. I suspect phone line problems as I've used my SpeedStream 5200 broadband modem at her house and the problem still persists. but both her modem and mine work flawlessly at my house. She also uses the same model modem as I do. Since I can't get the cmd box commands to work, could there also be software (Windows XP) problems at work also?

However, I would like to get the ipconfig, etc. commands to work.

Any helpful thoughts/ideas will be greatly appreciated.

Dell Dimension 3100
Win XP SP2 Home Edition
Pentium 4 2.8 GHz
504MB RAM
Intel PRO/100 VE Network Connection (shows as working properly)
52.7GB WDC WD800JD-75MSA3 hard drive

A:ipconfig not recognized as internal/external command, etc.

Just tried the same on my own pc. While your in the 'command prompt' window, you could try typing: ipconfig /all and press Enter on the keyboard
it will bring up a lot more information

Donie Have you seen this web page http://help.expedient.net/broadband/...ream5200.shtml

Read other 4 answers
RELEVANCY SCORE 82.4

I am getting a message as above if I attempt to execute ipconfig. I tried another machine but the same message returns. What could be wrong?

A:'ipconfig' is not recognized as an internal or external command, . . .

  
Quote: Originally Posted by churin


I am getting a message as above if I attempt to execute ipconfig. I tried another machine but the same message returns. What could be wrong?


where are you typing it and what switches are you using?

Read other 9 answers