Over 1 million tech questions and answers.

H5321 3G card issue with windows 10

Q: H5321 3G card issue with windows 10

Hello, I recently made the windows 10 upgrade from windows 7 on my x230 laptop.Unfortunatly, my 3G card Ericsson H5321 does not work anymore.I tried updating the drivers but this doen not seem to work.Has anybody had a similar issue? Thanks for your help Matthieu


Go to Solution.

Preferred Solution: H5321 3G card issue with windows 10

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: H5321 3G card issue with windows 10

HiUpgrade modem drivers AND firmware:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x23...http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x23...Unfortunately, you have to find another laptop with win8 installed to flash firmware as the flash tool doesn't support win10. Of course, check out current fw in the modem.

Read other 9 answers

I've got a T430 with Windows 10 and my WWAN module is not showing up right. In the device manager it has got an exclamation mark and windows 10 is unable to install the driver on its own. I have read this thread which recommends to downgrade windows 10 in the firstplace, then upgrade the firmware and update back to windows 10 or use the Firmwareupdate tool which later got updated to windows 10. My Problem is, that i am cant downgrade and the new firmware updater for the T430 isnt working. Same with the driver update. Basically i have tried everything. The new driver update, the old one for windows 7/8/8.1, the new firmware updater, the old one.All i got was the error logs provided below. I really would like to use the WWAN module but it seems, i cant get it to work. What seems wierd to me, is that if i deactivate the module, it is showing up under "Network and Internet" but if i activate it, it is gone. Spoiler (Highlight to read)??And while the Network module isnt working, the gps module is showing up without a problem and is working fine. Sounds to me like a software problem. If there is anything i should test or if you need some more logs, i am happy to help and get this fixed soon.

Log.zip ?17 KB

Read other answers

in case of Windows 10 clean install there is probably need for H5321 gw firmware update before Windows 10 driver installation. Where can i find that ?( without firmware update H5321 gw will just not work )

Go to Solution.

A:T430 H5321 gw firmware update for Windows 10

Hello and welcome,
Is this what you're looking for?  http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x23...

Read other 5 answers

Hello, I have a SIM-card installed in my T430s (working with Win7 64). It worked fine, but I didn't use it for about 3 months and now I'm not able to get a connection: It just doesn't appear in "available connections". The button to deactivate the flight-mode is on (allowing connections, WLAN is working).There is a "Mobile Broadbandconnection" in "Networkconnections" (Not connected, H5321 gw Mobile Broadband Driver). When clicking on "Diagnostics" it says "The connection to the computer was either detached or the computer was never connected to 'unknown network'".The mobile ISP (T-Mobile) says the card is still active and yes, it's inside the appropriate slot.Lenovo Update and Lenovo System Health and Diagnostics are telling me everything is fine.The "H5321 gw Mobile Broadband Driver" appears in Divice Manager. Windows tells me it's the newest driver (02/19/2013).I saw suggestions that the WWAN might be turned off in BIOS, but couldn't find such a switch. The BIOS is from 2016-09-12.I tried to install the newest firmware from http://support.lenovo.com/de/de/downloads/ds111734, but it gives errors:TL:Device           ERROR     <<<< TlLocDeviceSerialReceive() - Timeout.
TL:Device           ERROR     <<<< TlLocDeviceSerialReceive() - Timeout.
(some more of that)
ECP:Device          ERROR     Failed to identify module. Close dev... Read more

A:WWAN: No connections available (T430S, H5321 gw, Win7)

Hello and welcomeBe sure an APN value cellular operator privides for your tariff/contract matches the APN settings in the Connection Manager.Regarding the BIOS:Security menu-> I/O Port Access-> Wireless WANDoesthe wwan modem work in the Device Manager w/out errors? Is there appropriate wwan network adapter in the Network Adapters category?

Read other 2 answers

I hope this is in the correct forum. I put it in here as I beleive it is a Windows 7 / driver issue as the card reader worked with vista.

It is an 02Micro SD card reader that comes in the Toshiba P300 161 PSPC4E. The reader shows up in device manager and windows says it is working correctly but nothing happens in my computer when you put a card in.
I have tried both drivers that the Toshiba site suggests for it and installing them from the setup.exe and also from device manager directing it to the driver.

Any ideas?

A:[SOLVED] Windows 7 and SD card issue

What is the name and date of the driver in Device Manager?

Read other 17 answers


Any advice on this?

A:Windows 10 or Graphic card issue

If you can get into Device Manager try updating your driver. If no driver is available try rolling back or using the generic driver and see if your problem goes away.

Read other 2 answers

hi guys I've been a long time reader here at techspot and I've got to say i love the website. Now for the most part i consider myself pretty familiar with computers and i can handle just about anything as far as computer problems go. However this one has me stumped, so i figured i could turn to the most knowledgeable computer gurus around. So my problem is Windows seems to be dedicating a little over 2 gigs of ram for my wireless card. Now this is odd because I've never heard of a wireless card needing memory dedicated for it let alone 2 gigs worth. i can tell it is using it for the wifi card because whenever i have it hooked up to the computer, windows tells me i only have 1.99 gigs of ram available. I also know the card works because I've hooked it up to my brother's rig and he has windows vista 64-bit and it works fine with no memory being dedicated for it. I also notice when the card is connected my computer seems to hang doing just about anything even something as simple as just moving the mouse. So any help with this would be much appreciated as it has me baffled so far. I'll List a few specs below and i can always provide more if necessary.

I've already tried updating to the latest drivers and that hasn't helped at all. I also had this problem with a linksys wmp600n adapter as well.

OS-Windows 7 business 64-bit
Wifi card- PCE-N13
4 gigs of ddr3 ram
intel i5 cpu

A:Odd windows 7 network card issue

The comments here indicate others have problems also.
Try uninstalling the drivers and using the Win7 drivers.
You may need to return it.

Read other 2 answers

First off, this is very random when this happens, sometimes every five minutes, sometimes every five days. Whenever I'm running a full-screen program other than an internet browser, my computer will freeze and then the display will completely distort forcing me to restart my computer. I have visually inspected the card, reseated it, cleaned the slot, tried it in a different one, new drivers, old drivers, but it still happens and only in Windows 7; not XP. I have narrowed it to my video card which is a BFG nVidia GeForce 6200 pci card with 256MB of RAM. I have done everything that I can think of and it still won't work.

A:Video card issue in Windows 7

live :
Hello & welcome to TGF.

Which W7? 32 or 64 bit?

When did the problem begin? What changed; installation or removal of hardware or software; updates to W7; antivirus, other program?

Random issues are very difficult to troubleshoot, for me. Reads like you've done everything I would do.

XFX suggested, for a different issue I had:
download new drivers for graphics card
uninstall nvidia graphics, in control panel > prog & features > nVidia
Download driver sweeper http://www.guru3d.com/category/driversweeper/
boot to safe mode
run driver sweeper
install new driver
boot to normal mode

Read other 3 answers

If you've checked the HP site for the latest drivers for your laptop model, you may have noticed that AMD drivers have been added. Finally, the laptop > HDMI > TV connection issues I have been having are 100% fixed.  What I did was - I uninstalled the previous drivers using DDU in safe mode. Then I downloaded and installed the drivers on the HP site. Check the page for your laptop model for the appropriate drivers to install. The TV is recognized now and am able to extend my desktop. Apparently only the newer models have W10 drivers released by HP as of right now. Also, make sure to turn 10-bit pixel format support off in Catalyst Control Center. 

A:HDMI issue with AMD card in Windows 10 has been fixed (for n...

Hi @dmat86? ,Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! Thanks so much for sharing what has worked for you. Have a great Weekend. Thanks.

Read other 9 answers

I have a Dell 8300 that is several years old. I (regretfully) opted for the free Windows 10 when it came out a few months ago. Despite it having some issue fully installing and running correctly, I have otherwise not had any issues until the last few days. I’ll say now that I also have 2 monitors which have never given me issue, one hooked up by HDMI and the other by traditional monitor cable.

This all started by appearing to not fully boot up. From a restart, the screen would be black which lead me to believe something was occurring that would prevent it from fully booting to my homescreen/desktop. Thinking I had inadvertently got a virus, I tried to boot in Safe Mode so that I could troubleshoot and if needed revert to a previous System Restore point. I had a *** of a time even getting into Safe Mode...only one out of every 5-10 hard resets would get to the blue screen when pressing F4, and once there, I would not allow me to do a restore point. I tried System Restore to one point, which said it failed, so I tried another, which failed, and another etc. It also would not complete the Startup Repair. It would give some type of error that it could not complete those tasks. I did not want to do a full system Reset/Refresh because I don't want to lose my personal files.

Selecting the option to boot in Safe Mode appeared to be doing the same thing where it would load to a black screen which again made me think it was locking up somewhere in the load process which nor... Read more

Read other answers

We use a Smart Card for two factor authentication to RDP into servers.  However, when the card is inserted and your desktop gets locked, when you go to unlock it defaults to the Smart card instead of the credentials you logged in with.  Is there
a way to turn off the smart card for the Windows interactive login but still have it available for RDP sessions?

Read other answers


Few days before New Year i bought new "fancy" and "strong" computer.
Motherboard: GIGABYTE PP55-UD3P
Processor: Intel i5-750
Graphic card: GIGABYTE ATI RADEON 5870 1GB DDR5
Memory: Kingston 2x2GB DDR3 1600MHz (1333MHz is default i didnt overcloacked)
Hard disk: 1TB Samsung 7200rpm 32MB cash
Monitor: SONY LCD TV 32" Bravia

I installed windows 7 x64... and my nightmare begins.

First I got some BSODs during installation of drivers that came in card package. I am not sure if it was graphic card or motherbord drivers. I downloaded and installed newest 9.12 Catalist from ATI site, drivers for 5800 serie for windows 7 x64.

Then I proudly installed DIRT 2 that came with ATI RADEON 5870. I got couple of crashes during DIRT intro as many other ati card owners complaint about on forums. I think I eliminated that problem when i set GPU and memory frenquency to be 850MHz and 1200MHz for all windows energy saving states (there are 3 of those in ati profile file). Before I did that I had quite a few graphic card crashes with stripes on screen and had to hard reset the computer (problem that is also well known to ati card users according to forums).

And finally when i thought i had solved all issues (no crashes for a few days) i got two BSODs in last three days. I leave computer to download something and after few hours ... crash.
I have plugged this computer and my work laptop both to SONY TV (PC is connected via HDMI cable and lapt... Read more

A:BSODs in Windows 7 x64. Graphic card or memory issue?

The debugger can't access symbols for your copy of Windows 7.
Please let us know where you got your copy of Win7 from.
If it was on a disk, what did the disk say?

There's really nothing that's identified by the BSOD's.

First, please uninstall your copy of Acronis True Image - it's an older version that may have some issues with Win7 (even if it's listed as "compatible"). You can reinstall it after we've finished troubleshooting.

Please run Driver Verifier according to these instructions to see if it can get us any extra information:

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everythi... Read more

Read other 6 answers

first, i'm apologizing for being a computer idiot, but I've never actually messed with / installed a sound card myself. I had it installed by someone who knew what he was doing. :\

okay, so:
i just did a clean install of Windows 7.
a few months ago, i had a new graphics card installed to allow me to play The Sims 3. everything worked fine for months, just exactly like it is now, until I installed Windows 7.

Now, in my device manager, I show two graphics cards:
- Radeon X1300/X1550 Series (Microsoft Corporation WDDM)
- Standard VGA Graphics Adapter.

Both show up as fully updated with working drivers, and claim to be working properly, but in my display settings, it shows up as "Generic PnP Monitor on Standard VGA Graphics Adapter." I've disabled the VGA Graphics adapter in Device Manager, but when I restart the computer, it says "Default Monitor on," with no adapter listed.

Even though I always hooked my monitor into the motherboard, I tried plugging it directly into the graphics card, but the monitor shows nothing except for the "Monitor is working, test red, test blue, etc."

I also tried to enter BIOS and disable my onboard video card; but I didn't see an option to do that (I have Phoenix BIOS on an Emachine T2615, btw).

I actually uninstalled the OnBoard video through device manager, but it automatically installed when I restarted my computer.

I would just wait and take it to the guy who installed it (i won't go to best buy or an... Read more

A:Graphic Card Issue after clean install of Windows 7

hi smash1012, welcome to the forums , here is a link to the drivers for your card ATI Catalyst 10.6 Win 7 | Vista 32-bit download from Guru3D.com ,you will have to go into the bios and disable the onboard graphics from there if you have any more probs don't hesitate to post back , someone is always on hand to help

Read other 9 answers

Hey! I Have A Compaq Presario SR1420NX With An Nvidia FX5200 Video Card, Running Windows Vista Home Basic 32Bit With Service Pack 1. On Occasion, When I Turn On Or Restart My PC, I Get This Message:

"nvlddmkm stopped responding"

I Am Also Using The Latest Geforce Drivers from The NVIDIA Web site (Official drivers, Not Beta drivers). What Can I Do To Prevent This Problem Once And for all???

A:Windows Vista & Nvidia Video Card Issue!!!

Looks like that bug has been around a while

http://www.google.com/search?q=nvlddmkm stopped responding&num=20


Read other 1 answers

I was playing wolfenstein and every now and then the volume would increase in one go which made me . Now it's doing it with music too , every now and then the volume would shoot up didn't happen in vista.

X-Fi Sound Card issues - Neowin Forums

Seems i'm not the only one

EDIT ( Eax & Svm are off ) , put the crystalizer on 50% from 100% lets see what happens now

A:X-Fi Sound Card issue ( Volume Fluctuation ) in windows

I also have an X-Fi card and have not had this issue. Are you sure you have the latest drivers and updates for the card?

Read other 7 answers

card reader in hp folio 947m not work in windows 10 

A:Folio 9470m card reader issue in windows 10

@zubair044? Try installing this. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166654_1&swEnvOid=419... REO

Read other 3 answers

okay 2 weeks back i got a new mobo - which is on my spec cause the previous foxconn wouldn't support my also new graphics card as on spec.
so the thing is there was a issue while maximizing the windows (say,my computer,my pictures,browser or similar) there seems to appear a black box around the search (after my bro took it to the local shop & got the new stuff fixed it - was gone). (zip to video [it is virus free] - please watch it several times if you see nothing)
so, today i did a fresh install due to some reasons & this problem appears again (note again: i did see it before sending it to the shop but it wasn't there after i got it back again until the fresh install)
i haven't tried fidgeting with the catalyst control center yet..but i would like to know your opinions, & is there a fix for this?
appreciate any help and time

A:confused,monitor/graphics card or windows issue?

I personally can't figure out what it is your asking for help with, could you possibly try and explain what it is your seeing??
Thanks Fabe

Read other 6 answers


I discovered this forum recently and it seems to be a good place to seek advice. So here is my problem:

I installed Windows 7 on a Dell Inspiron 530.

After a reboot everything works fine until I put the computer to sleep.

After resuming from sleep the cpu usage is extremely high even when the computer should be idle. Task Manager shows that the System (PID 4) process is using some cpu. Resource Monitor shows that a lot of time is spent in System Interrupts - Deferred Procedure Calls and Interrupt Service Routines.

My conclusions at this time is that the integrated network card (Intel 82562V-2) does not properly resume from sleep and creates a lot of system interrupts. Note that disabling the network card makes the problem go away right away, and the problem comes back right away after re-enabling it.

Tried upgrading BIOS of computer and driver of network card but that did not help.

Any suggestions? Somebody else tried Windows 7 on a Inspiron 530?


A:Intel 82562V-2 network card - Windows 7 - Sleep issue

I don't see Dell Inspiron 530 on dell's website. How old is this laptop?

Read other 3 answers

The computer I used was '' Lenovo Y510P ''. There is a '' Nvidia GT755M [SLI] '' as a display card. I have tried both ways of downloading the video card driver from both GeForce Experience and Nvidia driver site. Both kinds of graphics cards are starting to update. Later, the 'graphic driver is installed' part of the screen goes and never comes again. I can not enter Windows when I turn off the computer. I have to take format from scratch.After formatting, Windows automatically loads a graphics card driver in 2017, trying to update the driver again, it stays black on the screen again. I have to format again.With DDU (Display Driver Uninstaller) program, I deleted the old video card driver and updated it again. But I met the same problem.I communicated with Nvidia and stated that I had such a problem. They asked me not to install the 388.13 video card driver. That graphics card driver has been loaded without any problems. But I have the same problem with all the video card drivers out there.NOTE: This problem only happens on Windows 10. I can update the display board without any problems in operating systems like Windows 8,8.1.NOTE: I have been having this problem for about 2 months, before I could update my display card in Windows 10 without a problem.The driver I am currently using is: 388.13

Read other answers

Currently i was usin default GeForce 9600 then i have bought a radeon HD 4870 (512mb).

when i put in the disc to install, it install half way then it come out this error message >

windows cant verify the publisher of this driver software. then i click continue. after finish.

i went to control panel then display setting.

it gave me another message > invalid display setting.

The currently selected graphics display driver can not be used. It was written for a previous version of windows and is no longer compatible with this version of windows.

The syetem has been started using the default VGA driver, please contact your hardware manufacturer to get an upgraded driver of select one of the microsoft provide driver..

can anyone help me out on this?

A:Solved: Graphic card issue with Windows Vista service pack 1 32 bit

can anyone help on this please?

Read other 3 answers

My SD card reader on my Precision M4600 has not been working ever since I upgraded to Windows 10. It doesn't look like there is a new driver for the SD reader from what I can tell. Is there any other solution or 3rd party driver that I could use to get m SD card reader to work? I really would like to be able to use it again.....
The device manager lists my smart card reader as Broadcom Usbccid Smartcard Reader (WUDF)

Read other answers


I have a HP Pavillion laptop model dv9292eu. The graphics card is a Nvidia Geforce Go 7600 and I am having issues with it. It appears the drivers have been corrupted. I cannot boot into normal mode. I keep getting vertical green lines in the background.

When i get to the login screen the famous blue screen appears which states the following:

Stop 0X000016
Attempt to reset the device driver and recovery failed. Collecting crash dump.....100%

Then the computer restarts.

I then logged into Safe mode and the following message appeared:

Program Signature:
Problem = Bluescreen
O.S Version: 6.0.6001.
locale ID = 2057

BCcode 116
BCP1 87D0F328
BCP3 00000000
BCP4 00000002


I did some searching and i found 116 code is related to the graphics chip. I was advised to go to HP site and download the graphics drivers. I downloaded the first version of the graphics card driver for my laptop and executed the file in safe mode.

I restarted the laptop and the greenlines were gone and i actually got to the login screen!woo! but then when i logged in, the screen went blank for 10 mins and nothing appeared. I hit the power button to restart and the problem came back. Sorry for profanity but ***?

I then went back and downloaded the latest graphics card drivers and same problem happen... Read more

Read other answers

The computer's a year old, running XP, and my boyfriend and I have no idea what's wrong with it (it's his). I'd put in hardware support but I don't know which piece of hardware may be corrupted, exploding as we speak, or what.

It began last night. He's done this before -- he has two monitors, one meant for a TV (I believe) and another old computer screen. Normally it runs on the TV one because it's bigger. He switched to the older one to show me how he can adjust the settings so that it's all vertical. That was great and dandy and we didn't expect any issues. He's done it before and it really isn't doing much to the computer.

Later, after midnight, he goes to switch everything back to normal. First, the computer acts like the monitor is there but that it can't do anything -- it tries to go into sleep mode or something. Then I suggest he unplug, shut down, plug things back in normally, and power back up. This appears to work.

I was a bit happy then, until we got to the XP loading screen. It's going... and then after, it flashes, then goes black. Nothing comes up, nothing does anything.

And so the three hour saga of last night begins. We restart, we spam F8, we get into safe mode, he disables Nvidia but can't open the application. Nor does his mouse function in safe mode (I know some don't, but it really doesn't help the situation). I've used my laptop to bring up shortcut keys and we're functioning through everything that way. He restarts after disabling Nvidia, an... Read more

Read other answers

Hi guys i've got a problem with my toshiba qosmio g20. I've had it running sweet on xp and i recently upgraded it to vista ultimate lite. It for some reason won't read my graphics card geforce 6600. it says the best driver is already installed for you called standard graphics adapter but thats wrong so i can't play games so im gonna put it back to xp but to do that is a mission. this laptop has raid harddrives so I need to install a driver. so i press f8 or whatever it is(can't remember) to enter the menu thing (this is at the blue screen before you enter the partition menu) it comes up with something like "please enter you manufactuers disk into the A:" but i don't have a floppydrive built in to be able. i've tryed usb floppydrivebut it doesn't read as A: so can use on of them. I've heard about useing nlite to put the drivers in a cd with the rebootstuff but i can't getit to read the drivers too. it was easy enough going to vista as you could insert a flash drive with drivers on it.

Please help me fix this or ill have to take it into a shop and pay them.

A:reboot issue and graphics card issue NVIDIA

Do you have AHCI or RAID as an option to select in BIOS?

Read other 3 answers

Hello forum,
So I just updated my Nvidea graphics card, and for some reason after restarting my laptop, in order to install these files to the system, the "System Thread Exception Not Handled" Blue screen error flashed on my screen, and later redirected me to an automatic repair screen, which attempted to fix this issue.
I ended up restarting the laptop on safe mode, uninstall my Nvidea graphics card and completely reinstall it from scratch.
But for some reason it keeps giving me the same error each time I restart my laptop.
After some research online, apparently there's an issue with Avast and Nvidea?
You will find attached the SF Diagnostic Tool grab all option files needed to view the issue at hand.
Any help would greatly be helpful.
Many are saying that I've not been installing the corrent drivers, but that's not possible, as it's directly from the MSI website (GT70 0NE) linked to the official Nvidea website, saying that the driver includes my graphics card (680M).
While other people are saying that maybe Avast is causing some issue towards the graphics card?
I have the Avast 2014 Professional Antivirus.
Laptop Specs:
Windows 8.1
MSI Dragon Edition 2, GT70 0NE, Intel Core i7-3630QM CPU @ 2.40 GHz 64 bit
Intel HD Graphics 4000
Any help would greatly be appreciated, I'm currently running my laptop without the nVidea Graphics Card Drivers, and seems to be fine so far.

A:BSOD Graphics card issue/Avast Issue?

This appears to be a duplicate topic
The other one is here: BSOD System Thread Exception Not Handled Error/Nvidea Card

I responded to the other one.
You may want to PM a staff member to have this one deleted (to prevent confusion)

Read other 1 answers

I just installed Windows 8 on my PC and am having a quirky issue on the desktop. Whenever I try to right click on the desktop, the screen flashes as if it is resetting itself, and then it goes back to the desktop photo. The menu never pops up. If I open a program or a folder, the right click menu shows up just fine. Is it disabled? Is there a fix?

Read other answers

I am having problems with my internet connection and my connections tray in general. I keep losing my internet connection and then when I try to repair my connection, it doesn't respond. Nothing in the connections tray will respond. When I go to reboot, I get the message that the connections tray is not responding and I have to end it. Does anyone have any experience with this or know what might be happening? Today I called IBM .. I have an IBM Lenovo X61 Tablet .. they told me I needed to reinstall my drivers for my connectivity (they called it the wireless stack .. I downloaded something for power management, hot key driver, wireless card connections, access connections) .. I did that and am still having the same problem .. any suggestions? .. I would appreciate any help! ..


A:Wireless Card Issue or Software Issue

Welcome to TSG:
Things to try:
Change the wireless channel being used .1/6/11 in US
If standalone router,download and :install latest router firmware.
Do a stack repair.Pick your Operating system :

Stack repair for XP and Vista.
Courtesy of Johnwill of the Networking forum.

TCP/IP stack repair options for use with Windows Vista.

Start, All Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

In the command prompt window that opens, type type the following commands:

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.
TCP/IP stack repair options for use with Windows XP with SP2/SP3.

Start, Run, CMD to open a command prompt:

In the command prompt window that opens, type the following netsh commands..

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.
Take a look at the wireless network adapter in device manager.Look at the driver info.See if there is a more current adapter driver for that card on the pc makers web site.

Reset the router to it's default config.Hold the reset button in for at least 15 seconds.

These are most of the basic fixes for intermittent... Read more

Read other 1 answers

Well I just found this forum today, so I decided to ask this question.

About a year ago, I had to system restore, because my computer just kept FSODing on me. When I went through the system restore process with Dell, at the end of the process I got an error. I don't quite remember what it was, as it was so long ago.

Ever since then, my computer has been completely without sound. I have tried everything from installing/reinstalling/uninstalling drivers, to the most simplistic, such as checking if my speakers work, or are connected.

So far, nothing has brought me any closer to figuring out what this problem could be. I am pretty sure that somehow, my sound card (its an integrated one) has just fried or something, but I really dont know.

So... is my sound card busted? Or are my drivers just not working for some reason?

Thanks for your help in advance.

A:Sound Card issue, or driver issue?

System restore . . .

System restore or system recovery? Did wipe the old operating system out and reinstall everything from scratch (system recovery) or did you use Windows' system restore to backdate the configuration. (Frankly, I think the choice these of terms by the industry are very confusing.)

Assuming system recovery and assuming the sound worked before and quit after system recovery, I'm for a misconfiguration. But, the simpler fix might be a cheap add-in sound card.

Read other 3 answers

"The card supplied was not recognized. Please check that the card is inserted correctly, and tightly."

I ran some updates on an employee's computer and now when I start it up, I receive this error if the aircard is in the PC Card slot. I understand it's misinterpreting it as being a security card or whatever the case may be but I don't understand why or how to remedy it.

Anyone with a similar experience or that can shine a guiding light?

A:"The card supplied was not recognized..." Login issue w/ Aircard in PC-Card slot

What are some other good tech support sites? I work in IT myself and don't use forums for them nearly as much as I should.


Read other 2 answers

Hello all and Happy New Year,

Recent problem with a 5 year old HP desktop.

Turn it on it goes through the BIOS and starts up as normal. Once it gets to the Windows 7 introduction screen it freezes. It never makes it to the desktop screen.

What do you guys think? virus? HP problem? win7 problem?

opinions please.


A:Windows 7 issue? Virus/Malware issue? or HP issue? i don't know

Hi test the hardware memtest 86 + for the ram and seatools for dos on the hard drive if they pass ok then you could try a start up repair from your install or recovery disc.
download the pre-built iso zip from here Memtest86+ - Advanced Memory Diagnostic Tool and burn to a disc unzip it first use imgburn The Official ImgBurn Website to burn the iso to disc Guide to using Memtest86+ - Geeks to Go Forums
SeaTools for DOS tutorial

Read other 1 answers

I have a computer with ASUS A7V333 MB. The monitor went dead one day and found that I'd neglected to keep the dust cleaned out and found the vid card fan in pretty bad condition. I cleaned everything out inside, then rebooted, but the monitor was not working again, getting "no Signal" on the screen or such. I looked at the vid card fan and noticed it was not moving, so used my finger to nudge it and it started up and the monitor worked. Had to do this every day upon starting up. I found a tech article on how to take apart the fan to clean it and relube the shaft, but was unable to do this. I shopped around for a reasonably cheap card and got a GeForce 6200 LE 512mb AGP 8x card. When I put it in, nothing happened. I've checked the monitor and its plug/pins, as it works in my other computer. I read some other articles about changing something related to the vid card in bios, but I can't get to the screen to do that.

I'm wondering if there are any other ideas of what might be the problem without taking it into the shop, as I am unemployed and very tight on money. I've got sensitive data and projects on my computer that I have not backed up and am not wanting to take into the tech shop. My fault for not backing up the last month's work. Can a diagnostic check be done if I remove the hard drive to protect my creative work? My MB is from 2002 and it could be the AGP socket is going bad? Don't know if that happens or not. There's al... Read more

A:vid card or MB issue?

Read other 6 answers

I put a new NIC card in one of my PCs. When I hooked it up to my network I can no longer get to the internet, I noticed there is a yellow "!" on my adapter in device manager. I tried re-installing the drivers but same results.

I tried resetting my router, modem but that still didnt help. Any ideas what is causing this? I am getting a message of can't connect to my DCHP server".


A:nic card issue

If you are getting a yellow ! in device manager, you are probably not installing the correct drivers.

Read other 1 answers

Hello- just got a new Radeon 3870. When I installed, I just downloaded the latest ATI drivers instead of using the bundled CDs, as they are usually out of date. Everything works fine, except in my device manager I get an unknown PCI device that I can only assume is the new card. I guess it isn't too big a deal, but I would like to make windows recognize the drivers if possible. Thanks!

Oh and it also claims to have an unknown multimedia controller, but my sound works fine (audigy 4). Maybe its the onboard sound controller?

A:New ATI card issue

Multimedia controllers are usually sound or TV adapters or similar.
Check the display adapters in device manager to see if it is listed.
It may be that the secondary display on the card doesn't have the driver
installed,but I would guess it is something else.
Right click on the uknown device and click properties.
Click the driver tab and click update driver.
Let windows search for a driver.
If it's the video card,it should find it.

Read other 2 answers

Hi guys. Im having this weird problem on my motherboard. I have a gigabyte ga-m61pme-s2p board which i purchased brand new last year. for the past 6 months now, im experiencing this weird thing:
first my onboard lan failed - showing no internet connection / no lan controllers even in device manager
purchased a used PCI lan card, working for 1 month then stopped working
purchased a new PCI wifi card, working for 2 months then stopped working
purchased a new PCI lan card, working for 2 months then stopped working
purchased another used PCI lan card, working for 1 month then stopped working again.

tried using the parts on a diff PC now, theyre no longer working

this is very weird for me. any thoughts?

A:LAN card issue

Read other 6 answers

Hello again friends.

I got a TV tuner card for X-Mas. (If you dont have one I recommend you get one. ) I keep getting a warning prompt advising me to enable DMA in my hard drive, so I finally broke down and enabled it. Upon rebooting, I no longer can drop and drap onto/from the desktop. Not to mention, the number of times I hard to hard-reboot my Pc to finally get to windows.

What is up with this? And what in the heck is DMA?!

renegade X

A:What is DMA??!! (issue for TV card)

You might want to look here (or do a Google search). It appears you may have a DMA channel conflict.

Read other 3 answers

Can't get to the internet. I think my internal onboard one is bad do I bought another one. These are the things I have tried. I tried switching out the cable for a new one, I tried putting the cable from my computer from my PC to the modem directly and no go. I reset both my modem and router waiting minute or 2 in between. I tried a new card. I had linksys on the phone trying multiple things like disabling my NIC card, doing a repair, install drivers from their site over internet. I tried pinging my router to no avail.

I am at a loss. That is why I am wondering if I put in my XP cd and try and do a system restore? I don't know if that comes set up to run by default or is that something I manually would of had to of done because I didn't. If so, would re-installing the OS do the trick? I just did an image copy of my OS this past sunday with Acronis true image 2009. Should I try that? what do you think?

Again, thanks for your help.

A:NIC card issue

Read other 7 answers

So. I had a 64gb micro SD with music in for my mp3. Acquired some more music on a usb from my brother (legitimately bought) and though hey! I'll sort all my music out to folders and delete duplicates. You know how it gets. So after this. Thought I'd get a 256gb micro SD and put all my music on this (we're talking 59gb). So started the transfer. Said 10 hours. Yh yh fine. Then at the end. All the folders were there. But we're empty. So formatted it. Moved the folders bit by bit alphabetically. At the end as i safely eject it. It says corrupted and the same folders there with no content. So thought Instead of transferring from my laptop to my micro SD. I'll bypass the laptop and go from my external HDD to the micro SD. Transferred my music to the HDD then over the the micro SD. No problem first stage. And a faster transfer to the micro SD. And yet again when i eject it and insert into my mp3. Only 800 odd songs there instead of 12000 and the folders are again present but empty. Please help. I've wasted hours of my life on this!

Read other answers

ok i just recently have been having problems with any thing graphics related. Ok first off, the other day i was playing need for speed : hot pursuit 2 and it all of a sudden froze, the music was still goin, but then that stoped, and then nothing was doing ne thing, but all of a sudden it started going again, and i kept playing. So that happened a few times and it pissed me off so i stoped playing. So now today i went to play wartcraft III - Throne of darkness and on the main screen as i was selecting an option it just froze up like need for speed did. Now i thought this was really bad and i started to get angry. So i quit and then restarted, but that didn't fix any thing it just froze a little while into the game.

So now i decided to re install war3 and the expansion but nope still nothing. Then i tried using differnet drivers fo my vid card and still no. So I started to try out other games, such as cs and still that game froze up once i was actually playin in the game. Then i quit, did restore thing to an earlier point and still same thing happened.

Now tonight after all my struggles i reinstalled windows, totally new(format and everything). With no luck it still froze up

Now i have been talking to other ppl and they say this has to be a graphics card problem, now i have a geforce TI 4200 and have enjoyed it performance, untill now. IT is only one year old so it shouldn't be dying of age yet.

Is this a hardware issue you think and the card is just dying of old... Read more

A:gfx card issue

Read other 8 answers

I just purchased an SD Car with the USB attatchment so I could put it into a digital photo frame. When I put the USB into the computer it says "Please Insert A Disk Into Removable Disk (F)". When I try to format it I says "There Is No Disk In Drive (F)).

Can Someone Help?

A:SD Card Issue?

What size SD card?
Many card readers choke on the larger capacity cards (> 1 GB) and don't work.

Read other 3 answers

I took some photos today with my digital camera and earlier this evening i went to take them off and on the computer.... and put my Secure Digital card in and go to open the folder and wham.. windows keeps asking me to format my card.. very annoying..

Ive upgraded from Xp so im finding all these annoying problems.. anyone have an idea how to correct this ?

A:SD card issue

You might have corrupted the card, try to see if it's still recognized by the digital Camera.

There isn't any problem with your windows 7 upgrade

Read other 3 answers

So the other day i was on my computer and i went to open Minecraft, i logged in and then when it went to open and all the sudden different colored pixelated lines came across the screen so i shut my computer off and waited a bit then when i turned it back on it was fine untill i tried to open Minecaft again, then the lines got thicker and changed from horizontal to vertical. I shut my compter off again, waited and this time the lines were there as soon as i turned it on, so i started it up in safe mode and tryed to run a virus scan but it only ran for a second and said there was no threats found. So i tried to start it normally and everytime i did it would bluescreen after it logged in. Then i tried to reinstall windows with my windows 7 disc and it got about half way through then bluescreened and then when i turned my computer back on everything was bigger and i could only see about 1 3rd of the screen and i cant see the things that i can do (all i could see was safe mode). So im wondering if its my video card and if it is i have a spare one i can try but i dont know if it will screw up the spare, and since its half way through installing windows will that affect the card at all? By the way my computer is a Gateway DX series with a ATI Radeon Premium HD 4600 series graphics card

A:Video card issue, please help

what are you running
video card brand and model
power supply

check the listings in the bios for 12v line voltages and temperatures and post them
in the device manager uninstall the video card
reboot tapping f8 and choose low resolution mode
when windows finishes rebooting
disable a/virus
install your drivers
reboot the computer

wait till windows finishes installing

gateway are well known for failing power supplies

Read other 3 answers

I've been having some performance issues with my graphics card, NVIDIA GeForce 9400GT, ever since installing Windows 7. When watching movies/shows on certain sites, specifically Hulu.com, and enlarging the video to fullscreen, the videos become choppy.

I was using XP Pro before making the switch and I never had any issues like this before. I'm going out on a limb and thinking that my current card is just not up to par for Windows 7 (especially since that Windows experience rating system has my graphics capability pretty low) and I need to upgrade...again.

Basically, I'm asking for suggestions on what I should be looking at. I'm not a gamer, the most I need out of my video card is to be able to watch movies and videos on my HDTV.


A:Graphics card issue

If you haven't installed the driver for the card, it'l cause all those things to happen.

The radeon hd 4670 is a pretty solid card for the price. It doesn't use that much power so there's no worry about upgrading your psu.

Read other 3 answers

Hey, I recently replaced my graphics card as the old one died on me.

It functions properly for the most part, however I have to turn the hardware acceleration down to view videos and put it back up to play games. If I do not turn it down when I run a video, the computer will begin to function extremely slow, and it takes about five minutes for me to use "end task".

I'm absolutely positive I have the most update drivers available. It's an NVIDIA. The previous card was also an NVIDIA and never had this issue, but it was much older and less powerful.

I'll give you guys the specs:

Name NVIDIA GeForce 6200
PNP Device ID PCI\VEN_10DE&DEV_0221&SUBSYS_02F1196E&REV_A1\4&1C526AC9&0&0008
Adapter Type GeForce 6200, NVIDIA compatible
Adapter Description NVIDIA GeForce 6200
Adapter RAM 256.00 MB (268,435,456 bytes)
Installed Drivers nv4_disp.dll
Driver Version
INF File oem3.inf (nv4_NV3x section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1024 x 768 x 60 hertz
Bits/Pixel 32

I'm running it on Windows XP, but this also occurred on Windows 2000 when I tested it.

My guess is that it is not loving my motherboard or processor. Sadly, I'm not certain of the make on the motherboard. I think it's a AMD-SiS, but I'm only about 60% sure on that. The processor is an "x86 Family 6 Model 8 Stepping 1 AuthenticAMD ~2000 Mhz" or so the system info says.
Any advice on how to get it so I don... Read more

A:Help with a Graphics Card issue

Read other 12 answers

I just recently put Win7 32-bit on a compaq presario 2100. Since then it's been using a standard vga graphics adapter its not easy using a computer with a 640x480 screen. The only driver i have found was on the compaq website and it's only for XP. also i lost my sound too. Any help would be greatly appreciated.

A:Graphics card issue

doherty1321, welcome to the Seven Forums.

Which version of the 2100? There is more than a few to choose from,

Compaq Presario 2100 Notebook PC series*-* Download drivers and software - specify product name - HP Business Support Center

The couple that I looked it it doesn't look like there will be much of anything but XP driver for it going from the dates on most of the driver downloads available (2003 and 2004).

Read other 9 answers

Since upgrading to windows 7 from vista, I can no longer delete files from my SD card. When I try to format it, it tells me it's write protected - but it's not. I thought maybe my SD Card was faulty, but I've since tried it on my parents Vista OS and it works absolutely fine.

Any help?


A:SD Card Reader Issue

Hi Karen,

I've found some Vista drivers that may work to solve this problem in Windows 7. Please try downloading the appropriate one below:

If you have Windows 7 32-bit: Ricoh 5-1 Card Reader Driver HP Pavilion dv6710ea Entertainment Notebook PC - HP Customer Care (United States - English)

If you have Windows 7 64-bit: Ricoh 5-1 Card Reader Driver HP Pavilion dv6710ea Entertainment Notebook PC - HP Customer Care (United States - English)

Let me know if that helps at all.


Windows Outreach Team

Read other 9 answers

Hi guys,

Basically i bought a new computer, and decided to update the graphics card, i purchased a 2gb 640gtx (if im remembering right) and it didnt seem to like my computer, at this point i had a 280w power supply. Basically the screen would continuously flicker even with the newest drivers. So i took it back stating it was faulty although i have a feeling it may have been my psu causing the issues as 280w is pretty low. I changed it for a 1gb 550gtx ti card and purchased a 400w power supply as that was what it recommended. I installed the new one and everything seems to be peachy. However i have found in windows that whenever im playing media, and this is any media from music to videos my screen will turn off for split second then back on. As its carried through hdmi it takes the sound too. When i play games they are perfect with high resolution and the screen doesnt blink unless it goes to video cuts screen not in game cut screen. So im completely lost as i cant find any previous threads stating a similar problem. Any help?

Also I used microsoft online checker and it says my card doesnt support aero but i clearly have the transparent effects which doesnt make sense. Am i having a driver conflict or something?

A:1GB 550gtx ti card issue?

Well Your Psu still isn't enough the minimum is 400w?

you should atleast be using a 550w PSU

you have to figure in load and potential Overclocking

any highend card especially a 6 series gtx is gonna need atleast 550 to 600w to work properly underload and Pc power consumption remember the video card isnt the only thing in that case that needs power you need to up it that is probally why your getting this

your maxing out the PSU

I would think a 5 series would need atleast 500w to run corretly with the unit

Read other 7 answers