Over 1 million tech questions and answers.

Bsod- 0x00000124

Q: Bsod- 0x00000124

Hello!

Like most BSOD users, I'm frustrated. I'll start from the top, explain what I have done, and explain what I will try if no quick resolution is in hand.

The Top:

EDIT, I filled out my system specs profile.
Mobo - Asus ROG Crosshair V Formula-Z
CPU - FX8150 8 Core AMD+3 (air cooled)
PSU - Coolermaster SP 850w
Ram - Corsair Vengeance 16GB ram
GPU - NVIDIA GTX 770

No hardware or software changes have been made recently. The most recently change would be the reinstallation of Windows 7 on my SSD about a month ago. Since the reinstallation, I've been playing games like normal every night. I was even playing last night. Today, I get home from work and boot up the machine, I started ARK (video game) and played for a few then got the BSOD - 0x00000124. I said "okay", restarted the PC, booted Windows normally and waited. After 3-5 minutes, I got the same BSOD. I tried booting into safe mode which worked fine at first. I tested my other HDD's by accessing them to make sure they are still working and all was well. I got the BSOD again and decided to head over to the bios settings to switch things back to default after reading up on my issue. My PC basically gives me less and less time before it shuts down. Now, even while im in my BIOS settings, it will eventually shut down.

What I've done:

1. I removed the GPU, RAM, along with the connections & reseated everything.
2. I attempted to swap out the GPU with another, but couldn't complete this testing since its such an old card that the connections aren't compatible with my newer PSU. I even attempted to retrieve an older PSU to complete this test, but failed there as well since my older PSU is dead.
3. I tried resetting the CMOS from the back of the computer.
4. Restored my BIOS to default, it's been O/C'd for some time now.

While I had the side of the case open, i decided to watch the POST lights on my mobo go through its set up while trying to boot. It seems to pass all but i get a solid red light from the DEVICE_LED. However, this light went away when I actually made it to Windows (which barely happens since it wants to shut off so quickly)

What's Next:

I plan to disconnect my SSD (windows), and both my HDD's, and connect my external and attempt to boot even though there isn't a bootable ISO to see if the computer hangs in a black screen and doesn't shut off at all, maybe that will identify if its a Drive issue.

What I Think:

I think it might be a PSU or an overheating issue. Why? Well, after writing this long post, I decided to boot up the desktop and it booted to windows fine and actually stayed on for like 10 to 15 minutes with no issues. Which is the longest its stayed on all day. It seems like the longer the PC is off, the longer is stays on when I boot it. All my fans are working, but when I removed my CPU fan, I noticed my thermal ink/glue is all dried up and pretty much gone... but im not sure this would cause such an issue?

Sorry for the long post, but its almost impossible to explain this in a few sentences. Especially if I expect any results! I would love to post up some dump file logs like you guys like or may need, but, like I said before... the PC doesn't give me much time to do anything.
Thank you!!

RELEVANCY SCORE 200
Preferred Solution: Bsod- 0x00000124

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Bsod- 0x00000124

Will your system run long enough to complete this tutorial?

I will give much needed information to our BSOD Team.

Blue Screen of Death (BSOD) Posting Instructions

Read other 5 answers
RELEVANCY SCORE 48.8

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, ffffe00154472028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
I know you said you've run hardware tests, but in our experience you have to run specific tests according to a specific regime. Run all of these and report back.

RAM - run a minimum of 8 consecutive passes, no less
RAM - Test with Memtest86+

CPU - run the STANDARD test only
CPU - Stress Test Using IntelBurnTest

Video - run for 20 mins
Video Card - Stress Test with Furmark

Storage - run the SHORT test only using the DOS version
SeaTools for DOS and Windows - How to Use

Read other 3 answers
RELEVANCY SCORE 48.4

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

A:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static

Hi irunebar12 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
Error : DCACHEL0_WR_ERR (Proc 7 Bank 1)
Status : 0xbf80000000000124
Address : 0x0000000101d80bc0
Misc. : 0x0000000000000086


The dumps are consistent with the error that there was a problem in writing to the L0 Cache of the CPU. That is a dead CPU and hence you are getting the errors even after a fresh install.
See if you are getting any errors in Prime95 according to the below (thanks usasma) -






Prime95 download site: GIMPS - Free Prime95 software downloads - PrimeNet
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it do... Read more

Read other 3 answers
RELEVANCY SCORE 48

Hello fellas! It's now like 1 year, that im having troubles with my computer. I had really many patience with it, tried really anything i could but now im done with my nerves and asking you to help.

Problem: Many different BSOD's + sometimes PC just Shutdown as if i took out the power cable. And it freeze sometimes untill i reset it - The picture freezes, sound stopped, nothing changes even with ctrl + alt + del. The Windows System Logs are full with Criticals, Errors and Warnings. They occur randomly, not just while im playing 3d Games but even without any programms running.

Since i bought that custom hardware im having those BSODS, Shutdowns etc sometimes 1x a week, sometimes 10x / day for many days in a row. I guess it's a Hardware failure, because i tried like 20+ Windows reinstalls. Diferent Versions of Win7, with same bad result.

I've bought those parts:

x6 Phenom Processor with silent Cool Fan
500W power supply
ASUS M4A88TD-V
Radeon HD 6900
2x 4GB Ram with passive cooling
2x 1TB WDC SATA

1. What i already tried:
a. After like 1 year i asked the seller to help out. He replaced following hardware: motherboard, power supply, graphic card. It didn't helped.
b. I tried to remove 1x RAM, then tried only with the other one
c. Installed windows on different Harddrives
d. Defragmented harddrives
e. updated drivers, ran many "optimizing" tools (btw. they destroy only the system instead to improve it mostly)
f. removed the dust, cleaned th... Read more

A:BSOD 0x00000124, A0000001 and random Shutdowns without BSOD

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also the MSINFO32 you uploaded it corrupt. So upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
BTW, a stop 0x124 is a hardware issue, and you may follow Stop 0x124 - what it means and what to try. ATM cannot suggest anything more due to lack of data.

And a stop 0xA0000001 is associated with ATI/AMD display driver; inbuilt and inherent in it. If this error is followed by a driver update, try to Driver Rollback. If it is taking place irrespective of the driver version, change the GPU.

Read other 8 answers
RELEVANCY SCORE 47.2

Hi all, I just built this PC recently (~1 week ago) have not encountered any problems until recently when I've been trying to overclock it. My motherboard is the Asrock Z97 Pentium anniversary board, the one that automatically overclocks with the touch of a button (I choose what speed I want and it sets the multiplier and core voltage). It lets you choose if you want to OC it to 3.8ghz, 4.0ghz, 4.2 ghz. I currently have it set at 4.0ghz which seems to be pretty tame compared to other z97+g3258 owners.

I have 2 monitors connected to the PC and it will only bluescreen when i push the cpu to its limit. Ie. when I'm watching Youtube/Twitch.tv at HD and playing League of Legends or Dark Souls 2 on the other screen. When I am doing this, my cpu temp stays between 70-80C while at idle it hovers around 35C and has never BSOD at idle.

I've noticed that before BSOD occur there will be some latency stuttering (internet lag) and I'm hoping the problem is outdated drivers (specifically the realtek ethernet controller).

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Extra information about the problem
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007187038
BCP3: 00000000BF800000
BCP4: 0000000000000124
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I am aware of the long-term risk of overclocking my pentium g3258 but I am just using it as a stopgap until the new 1150 chips come out.

Any help/advice will be much appre... Read more

A:BSOD under heavy cpu usage BSOD 0x00000124 hal.dll

Run 5 tests on IBT at MAXIMUM setting and report the temperatures. Read very carefully before starting.

CPU - Stress Test Using IntelBurnTest

Read other 5 answers
RELEVANCY SCORE 46.8

Hey everybody!

Let me say something first, I'm sorry... But my english is not that good! I'll try to write it good etc. but I have Dyslexia, i can't without a problem my own language dutch.. So like I said, I'll try.. And I hope you can read it!

So, let me explain the problem!

I have while I'm gaming al the time the bsod 0x00000124. I've done a little bit of researche but I can't find any solution!

So let me give my specs first:
Intel Core i7 860 on water
Evga P55 FTW
msi 460 hawk Sli
Corsair Nova 32gb SSD Raid-0
WD GP 1TB
Cooler Master silent pro 850watt

I had the proc. first overklocked @4ghz, but it was intel burn test and prime95 stable, so that couldn't be the problem, but I have deleted the overklock, so it couldn't be the problem at all!

I have updated my bios of my motherboard, I have updated my drivers,... I have done everything! And that couldn't fixed the problem!

So have anywone an idea? Please, let me know !!

Thanx!

A:Bsod 0x00000124

  
Quote: Originally Posted by Levietje1234


Hey everybody!

Let me say something first, I'm sorry... But my english is not that good! I'll try to write it good etc. but I have Dyslexia, i can't without a problem my own language dutch.. So like I said, I'll try.. And I hope you can read it!

So, let me explain the problem!

I have while I'm gaming al the time the bsod 0x00000124. I've done a little bit of researche but I can't find any solution!

So let me give my specs first:
Intel Core i7 860 on water
Evga P55 FTW
msi 460 hawk Sli
Corsair Nova 32gb SSD Raid-0
WD GP 1TB
Cooler Master silent pro 850watt

I had the proc. first overklocked @4ghz, but it was intel burn test and prime95 stable, so that couldn't be the problem, but I have deleted the overklock, so it couldn't be the problem at all!

I have updated my bios of my motherboard, I have updated my drivers,... I have done everything! And that couldn't fixed the problem!

So have anywone an idea? Please, let me know !!

Thanx!



Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it... Read more

Read other 4 answers
RELEVANCY SCORE 46.8

Hi, This is my first time using any forum but I really need help to resolve this problem.
I'm a pc noob of some sort, I've recently bought a budget gaming pc and I'm upgrading it part by part.

Current System Spec:

AMD Phenom II X6 1090T
4GB DDR3
ASROCK N68C-S UCC
Corsair TX 750
ATI 6970 2GB

Alot of these parts are pretty new less than 6 months old, the system was working with this hardware fine for about a month or so then I started getting BSOD while playing BF3 on ultra settings only when I turned my settings down to medium I was able to play for longer.

But now the BSOD has gotten worse and I now get it while on the desktop, listening to music on media player and watching youtube videos.

My first thought as a noob/novice was to reinstall windows so I changed my OS from windows ultimate x64 to windows ultimate 32x but the problem persist.

I know how to find c:/windows/minidumps but for some reason when I go to attach the DMP files here it won't let me, it says you do not have permission to open this file even though I'm the only administrator on my system.

A:BSOD With 0x00000124

Hello there. You can find more infor for that error here: Stop 0x124 - what it means and what to try

And, for the dump files... .dmp file is not allowed to attach here. First you'll need to put them in .zip(.rar) archive and then you'll be able to attach them.

Read other 9 answers
RELEVANCY SCORE 46.8

[CENTER]My PC started freezing, so I decided to reboot it to factory settings. But now I am getting a BSOD. I have tried different Nvidia drivers (including latest) but that doesn't make a difference. I have also update sound and direct X drivers. I have run lots of malware and virus scans, done a memory test and checked HDD for errors. Everything was fine. All windows updates are up to date. I used the program on here to create crash logs, I have attached. Iv also attached an autoruns .arn file.

Here is the BSOD code - STOP: 0x00000124 (0x0000000000000000, 0xFFFFFA8005592028, 0x00000000BE200000, 0x000000000005110A)

I should also add that the blue screen trigger percentage is as follows:
idle or doing little = 5%
browsing internet (no videos) = 10%
watching videos = 60%
online videos = 25%

plus there is an overclocking profile but I have set overclocking to default and it doesn't help, iv also tried 4 different overclocking profiles and still no different.

Crystal Disk Screenshot:
TechPower GPU-Z Screenshot:
Furmark Screenshot:

Any help would be greatly appreciated.

A:Keep getting BSOD - 0x00000124

All of the memory dumps give the WHEA_UNCORRECTABLE_ERROR code. This code is usually hardware related. Many of the dumps reference GenuineIntel as the source of the problem, however one of them was able to show the problem originating in GCACHEL2_ERR_ERR (Proc 0 Bank 8) which is your L2 cache on your intel processor. Please undo the overclocking you have described. Backup important data and run the Prime95 CPU test.

Read other 9 answers
RELEVANCY SCORE 46.8

Hello all,

A friend of mine is having some issues with his computer. I've asked for help on other forums, but they can't seem to help..

I'll try to make it as short as possible, here goes!

My friend bought a computer 2 years ago, with the following specs:
GTX280
Intel Core2Duo E8500
MSI P35 NEO-F
Mushkin DDR2 PC2-800

After 1 year, the computer started doing BSOD's with the errorcode, 0x00000124.
I've read on several forums for a solution (including this one), but it doesn't seem to help.
He had Windows Vista installed, so we figured it would be a good idea to format the computer. No problem occured while formatting, but we haven't been able to install windows again. Every time we try, he gets a 0x00000124 BSOD, and I have no idea what to do now. I've tried to help him for 4 months, no luck.

I've tried switching his rams around, and using only 1 block
I've tried adding new coolingpaste for his CPU.
I've tried clearing CMOS and cleaned his PC for dust etc.
Etc. etc. etc...

I've added this picture for you to look at. It's his PC Health Status.
http://img375.imageshack.us/img375/954/dsc00487ft.jpg

I have no idea if those are the right values for his components.

I hope you guys can help us out, and please ask for any additional info you might require.

Yours sincerely, Thomas

A:BSOD 0x00000124

Doing a google search this appears to be almost anything can cause this. Motherboard, CPU, Memory, etc.

If we had the actual PC Manufacturer and Model Number, we can look it up and maybe come up with something more that "the anything" potential.

Looking at the picture I see an option for "Chassis Intrusion" and that is on many Dell commercial line Optiplex models, could this be a Dell? (But not a GX280 with the CPU that is installed).

Read other 3 answers
RELEVANCY SCORE 46.8

Hey guys..
Didnt know who else to turn to.. Ive been getting some bluescreens lately.. Have not always gotten them and cant think of anything new really that has been resposinble.. Nothing new in my setup or anything..

as I said been working fine for long time then suddenly every now and then it just dies..
I have 3 harddrivers, c: which is OS harddrive has 15gb free space. other is d: and is a partition on c: which has not much space left, just a few GB. could this be the problem ( that I dont have much GB left ) cus other then this nothing has really changed on my computer past time.

I attached a dmp file.. Thx guys!

A:BSOD 0x00000124

look at this:
http://www.sevenforums.com/crash-loc...-what-try.html
http://www.sevenforums.com/crashes-d...ddmkm-sys.html
BSOD: Stop 0x00000124
http://www.sevenforums.com/crashes-d...ssistance.html


btw: no dump file is attached

Read other 9 answers
RELEVANCY SCORE 46.8

Hello guys.
I've been having this problem for quite some time now.
It normally happens when im playing and it's compleatly random, since sometimes I dont get any problems for 2 or 3 days and then it happens 2 ou 3 times in a row. I've already tryed to investigate this issue a few time but without any success. I'll just attach some of the .dmp files. The computer in question is a Asus Laptop G60j with the following specs:
- C2D e6600
-4GB ram
-nVidia Gforce 260m GTX 1Gb

Any other information that might be needed just ask.

Thanks in advance,
Tiago
 

A:BSOD 0x00000124

How old is this Asus laptop? Is Windows fully updated using Windows Update manually, until no more updates are found? All the 7 minidumps are the same... They don't provide much help
 

Read other 1 answers
RELEVANCY SCORE 46.8

Well basically ever since I built this computer 2 years ago I've been receiving BSOD or crashing. I replaced my HDD through RMA. Thinking that fixed the issue, I didnt think much of it until later I received another BSOD. BSOD have been an ongoing thing for me for a few years on and off. Now I'm receiving error 0x00000124 and the message "The system has encountered and uncorrectable hardware error". I ran temperature tests for my cpu and my gpu and the fans are working properly. I've done multiple ram test using memtest86 and even windows memory diagnostic tool. Although I did get an error using memtest86 1 time, I was never able to recreate that error. I ran the test muiltiple nights and did each stick individually and used them two at a time since I have dual channel. All 8 sticks of rams are the same type. I've updated all my drivers and my bios. Now I'm not 100% sure if I set the bios correctly since I'm a bit of a newbie and I built it myself. But everything is at stock except the ram timings and voltage, I didnt change the speed because I didn't know how to and it was set to 1333mhz. The timings were 7,10,10,28 and a voltage of 1.660, the closest I could get to 1.65, but even before I change that from 1.500, there were bsod and crashes. The crashes or bsods seem to happen when I just wake up and get on my computer, I don't turn it off usually. It will happen randomly, I was suspicious it was when I just opened games or started broadcasting usin... Read more

A:BSOD 0x00000124

Welcome
BSod code 124 is the most difficult to solve. It is clearly a hardware issue, but which hardware. Memory may be the most common but there are many other potential causes:
Stop 0x124 - what it means and what to try

Read other 6 answers
RELEVANCY SCORE 46.8

I have run out of options.. Quick ref to what I have done

-Fresh Install of WIndows7
-Bought another GPU
-Memtest
-Updated drivers
-CPU Stress Test
-GPU Stress Test

BSOD use to only happen when playing Eve Online and now its gone to random times with no stress on computer or me not even on the computer doing anything with everything closed. Computer has passed Memtest several times. CPU/GPU stress test is a hit or miss. I am now lost, I had RMA'd the GPU because I thought that was it. ASUS sent it back and said it was fine. While in RMA I bought a cheap GPU and had BSOD with that as well. Any help or input would be most grateful.

A:BSOD 124 0x00000124

This link has the most probably solutions to your problem. BUGCHECK_STR: 0x124_AuthenticAMD =
Stop 0x124 - what it means and what to try

If you have overclocked Stop and revert! This and check for Dust and Dirt. These seem to be the most probable causes. As well if the problem continues, i suggest to lower the vcore settings a tiny bit.
Try this test : General hardware: Hardware - Stress Test With Prime95 ( (Three pre-set configurations are available: Small FFTs and In-place FFTs, and Blend. Small and In-place modes primarily test the FPU and the caches of the CPU, whereas the Blend mode tests everything, including the memory.)

Read other 9 answers
RELEVANCY SCORE 46.8

I'm not sure where to start so I'll start from the when I got my SSD.

After switching to the SanDisk 240 SSD I noticed I get BSODs when my computer awakes from sleep mode, so I never use sleep mode. I don't like to use sleep mode anyways.

As time passed by I noticed my computer was rebooting randomly. I thought maybe it was overheating from my cpu due to my heatsink being terrible, but then after I upgraded to H80i closed water loop system I'm still getting the random reboots with no BSODs. I've been watching my cpu temps as I'm doing my tasks and the temps don't rise about 45c.

Now that I've installed the new Razer Black Widow Ultimate Mechanical keyboard I've noticed BSODs when it randomly shuts down.

In the Manager under Windows Logs I notice this:
Critical
Event ID = 41 (63)
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Steps attempted to resolve issue:
1. I've tried updating my drivers for my mobo and when I checked I've already got the latest drivers.
2. Upgrade cpu heatsink to the H80i.
3. Update OS.

I've attached the zip file created from the the SF_Diagnostic_tool.

Any help would be very much appreciated. I don't know how to read dump files.

*After submitting this post I launched Battlefield 4 for the 3rd time. I got my third reboot. Each time I was either launching battlefield 4 or playing it.

A:BSOD 0x00000124

Hi oddmut.

It appears that the BSODs are appearing during playing Battlefield4; and computer is more or less 3 years old.

Update your display driver to the latest WHQL.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.
________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************... Read more

Read other 9 answers
RELEVANCY SCORE 46.8

Hello my fellow computer geeks.

I have encountered my first BSOD on my first computer built. I apologize for sounding like an amateur as it is my first time dealing with this problem.

Problem:
So, one day I start my computer and it blue screens with the STOP error 0x00000124. I assume it's the BIOS so I update it. But, I also notice that the hard drive with the OS (Windows 7 Ultimate 64-bit) is not detected so I take out all of the hard drives and put in a brand new one with the intention of reformatting my computer and installing Windows 7 Home 64-bit.

However, when I boot my CD drive to install the OS, the BSOD pops up after loading the initial black Windows loading screen appears.

So, I am left with an unfortunate problem. I have a computer without an OS that blue screens every time I boot to try to install the OS.

Treaments:
I've reset the CMOs by taking out the battery and updated with the latest BIOs
I've stripped the computer to the bare minimum (1 hard drive, 1 cd-drive, mobo, graphics card).

Specs:
ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s
CORSAIR CMPSU-750TX 750W ATX12V v2.2
CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Intel Core i7-950 Bloomfield 3.06GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366
MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16
Samsung 1TB Hard Drive
CD/DVD drive of some brand (I figure that this and the hard drive are not really relevant).

Any help would be greatly ... Read more

A:BSOD 0x00000124

  
Quote: Originally Posted by mm0d2010


Hello my fellow computer geeks.

I have encountered my first BSOD on my first computer built. I apologize for sounding like an amateur as it is my first time dealing with this problem.

Problem:
So, one day I start my computer and it blue screens with the STOP error 0x00000124. I assume it's the BIOS so I update it. But, I also notice that the hard drive with the OS (Windows 7 Ultimate 64-bit) is not detected so I take out all of the hard drives and put in a brand new one with the intention of reformatting my computer and installing Windows 7 Home 64-bit.

However, when I boot my CD drive to install the OS, the BSOD pops up after loading the initial black Windows loading screen appears.

So, I am left with an unfortunate problem. I have a computer without an OS that blue screens every time I boot to try to install the OS.

Treaments:
I've reset the CMOs by taking out the battery and updated with the latest BIOs
I've stripped the computer to the bare minimum (1 hard drive, 1 cd-drive, mobo, graphics card).

ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s
CORSAIR CMPSU-750TX 750W ATX12V v2.2
CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Intel Core i7-950 Bloomfield 3.06GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366
MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16
Samsung 1TB Hard Drive
CD/DVD drive of some brand (I figure that this and the hard drive are not re... Read more

Read other 5 answers
RELEVANCY SCORE 46.8

Hello this is my first post so dont judge if i miss something . (thanks )

My OS is Windows 7 Ultimate 32bit.
My friend installed them because he has them.
Mostly BSOD happens playing games or when i give my computer a lot of pressure.

While trying to get the report that i attached my computer at the end of scanning BSOD didnt if that had to happen or not, but there where these numbers:
0x00000181
0x00000000
0x85C0A024
0xB6000000

I had Geforce 9600GT before but it was faulty so i changed it and got 240GT.Putted in yesterday and started to get BSOD from nowhere.

If you will need any more information please say I'll try to put it in as quickly as possible.

A:BSOD 0x00000124

Hi, Knight, and welcome to the forum. Sorry to learn you are having problems. Error code 124 is a unique error code and is a hardware error code. While I look at your files, please read this article on error 124: [2-Int] Stop 0x124 - what it means and what to try.

I looked at three of your dumps; two are error code 124.





Quote:
Error code 124, WHEA_UNCORRECTABLE_ERROR. Usual causes: Hardware, Incompatibility, May be driver corruption.

Error code A, IRQL_NOT_LESS_OR_EQUAL. Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility.



Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0x82e1b000 PsLoadedModuleList = 0x82f63810
Debug session time: Thu Oct 28 07:20:04.677 2010 (GMT-4)
System Uptime: 0 days 2:43:21.365
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
.....
1: kd> !Analyze
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 8 answers
RELEVANCY SCORE 46.8

Hi I just recently got my PC and have had these randomn BSOD's with the same error code and drivers listed. I have tried searching around but solutions and discussions have been a bit unique to other people's problems. I may have missed it somewhere so I do apologise in advance for any duplication. Anyway in summary the error code is 0x00000124 and always says it's related to ntoskrnl.exe and hal.dll.
The latest dump file became different when I switched on Driver verifier and selected only the 2 drivers above and I went into an infinite loop of BSOD's of which I only stopped by loading the last known good settings.

Additionally I have also got the PERFMON and Jcgriff2 files as instructed by the BSOD posting help.

Hope someone can shed some light on this. Generally the BSOD tends to happen as I am gaming and randomnly.

Thanks

Nik

A:BSOD 0x00000124

The 2 files that are mentioned are core Windows files.
They are protected by the system file checker also.
As such, if you were having problems with them, you'd have many more issues than just the occasional BSOD.
It's most likely that another, 3rd party driver is causing these Windows files to crash.

A STOP 0x124 error is primarily a hardware error - but it can be caused by compatibility issues, low-level driver problems, or even by malware. Here's some info on it: BSOD Index and here's a link to some suggested troubleshooting procedures: Stop 0x124 - what it means and what to try - Windows 7 Forums

FWIW - here's a link on how I suggest using Driver Verifier: Driver Verifier Settings But I generally don't recommend using it on STOP 0x124 errors (although it can't hurt if you take precautions).

More to follow when I finish analyzing the dump files.....

Read other 3 answers
RELEVANCY SCORE 46.8

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7
- an OEM or full retail version? OEM

- What is the age of system (hardware)? About a Year
- What is the age of OS installation (have you re-installed the OS?) Week Old

The Computer Freezes and does nothing else, i have to restart it to use the computer again, i use BlueScreenViewer and it shows a dump file

Manufacturer: Custom
Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (8 CPUs), ~3.2GHz
Memory: 24576MB RAM
Hard Drive: 2 TB
Video Card: NVIDIA GeForce GTX 580
Monitor: Acer 23in
Sound Card: Realtek High Definition
Operation System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)
Motherboard: Asus P6X58D Premium
Computer Case: Cooler Master HAF 932 Full Tower Black Case

A:BSOD 0x00000124

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

Stop 0x124 is a hardware error.... if you are overclocking try resetting your processor to standard settings and see if that helps ... if you continue to get BSOD here are some more things you may want to consider ..





Quote:
Stop 0x124 - what it means and what to try
Synopsis:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.
Generic "Stop 0x124" Troubleshooting Strategy:
1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways.

2) Ensure that the machine is adequately cooled. If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.

3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware. It is good practice to run the latest drivers anyway.

4) Update the motherboard BIOS according to the manufacturer's instructions. Their website should provide detailed instructions as to the brand and model-specifi... Read more

Read other 2 answers
RELEVANCY SCORE 46.8

Hello!
BSOD 0x00000124 occurs to me only when I play Portal 2 and Saints Row: The Third (I have both games on Steam), a totally random, once in a menu or after 5min of playing, sometimes after an hour ...

configuration:
Mainboard: Asrock P57 Pro3, BIOS ver. 1.90
CPU: Intel i5-2500K CPU
RAM: Corsair 2x4GB 1600MHz
Graphic card: MSI N560GTX M2D1GD5
HDD: 1.WD1002FAEX, 2.ST3500320AS
Power supply: M12II-620Bronze
Windows 7 Ultimate 64-bit (6.1, Build 7600)
(I bought it in the 9th month last year)

I tried this, but nothing helped:
-I replaced the HDD, than I put a backup of Windows to another hard drive,
-graphic card borrowed from friend, (mine works well on his pc),
-tried RAM individually and in various slot,
-borrowed RAM from a friend (mine works well on his pc, he has same motherboard, processor and RAM like me)
-borrowed power supply of friends, (mine works well on his pc),
-increased processors voltage,
-turned off cpu speed step in the BIOS (not a BSOD, but the computer froze in game)
-returned the BIOS to default options,
-turned off Microsoft Security Essentials,
-deleted USB 3.0 driver, turned off in BIOS (I read on internet that there were problems with them),
-updated DirectX
-changed from 5.1 audio to stereo,
-verified via steam integrity of game cache for both games,
-new driver for graphics card,
-fresh install of Windows and only driver for graphics card
-updated the BIOS

I put in attach dump file, dxdiag and masinfo32.
If anyone has any use... Read more

A:BSOD 0x00000124

Here are my Windows_NT6_BSOD_jcgriff2 and perfmon report.

Read other 7 answers
RELEVANCY SCORE 46.8

Hi,

I couldn't find the information I need. I've searching for several hours, but I can't find anything. Can somebody help me with the bugcode: 0x00000124? The logs are in the attachments.

More information: When I play a game like Fallout 4, after 15 minutes my computer crashes completely. The computer needs a restart. When I try to game agian the same thing will happen.
Thanks!

Read other answers
RELEVANCY SCORE 46.8

A friend purchased a Dell XPS 8900 just before Christmas and dropped it off to me for some upgrades (PSU, GTX 770, SSD). After installing the new hardware I did a fresh install of Win10 Home x64 and sent it back. He contacted me recently about lockups he has been having and today was the first chance I've had to look at it. First thing I fired up bluescreenview and had a look. There were 50 BSOD's since Dec 28, all with 0x00000124 and HAL.dll as the culprit. I'm a very experienced system builder and can install/tweak Windows in my sleep but analyzing BSOD's is not my strong suit. I know the video card, hard drives, PSU to be good and am currently testing the RAM. If anybody can have a look at the dump files and offer some advice I'd appreciate it.

A:BSOD 0x00000124 and HAL.dll

This is an interesting one, a PCI-E error.
Why this is an interesting one is explained below.
 Analyse

Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000004, PCI Express Error
Arg2: ffffe00149c188d8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000
Arg4: 0000000000000000

1: kd> !errrec ffffe00149c188d8
===============================================================================
Common Platform Error Record @ ffffe00149c188d8
-------------------------------------------------------------------------------
Record Id : 01d14ac7a0212c9e
Severity : Fatal (1)
Length : 672
Creator : Microsoft
Notify Type : PCI Express Error
Timestamp : 1/9/2016 11:34:48 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : PCI Express
-------------------------------------------------------------------------------
Descriptor @ ffffe00149c18958
Section @ ffffe00149c189e8
Offset : 272
Length : 208
Flags : 0x00000001 Primary
Severity : Recoverable

Port Type : Root Port
Version : 1.1
Command/Status: 0x0810/0x0407
Device Id :
VenId:DevId : 8086:a110
Class code : 030400
Function No : 0x00
... Read more

Read other 0 answers
RELEVANCY SCORE 46.8

Hello!
 
25th of August I started getting 0x00000124 BSODs. I tried swapping out my new video card for old, it worked and I RMAed my new one.
One month later I started getting exactly same BSOD, 0x00000124. I'm still using my old video card, new one still at RMA. I've done Prime95 for few hours and no issues. I'm gonna do Memtest86 now.
 
When PC BSODs, I don't see actual BSOD, screen goes greygreenish with black and white lines, sound looping and few seconds later It restarts (i've disabled automatic restart when bsod). RAM,MB,CPU are few months old only.
 
I'm suspecting MB or PSU cause I have another issue. When I cold boot, sometimes only fans turn on, mobo stays off till I hit restart button.
 
 
PC specs:
ASrock 980de3/u3s3
AMD FX-6300
Ati Radeon HD 3870
HyperX Fury Blue 8gb
Chieftec CTG-500-80p

Read other answers
RELEVANCY SCORE 46.8

Can any one help with this please?

random BSOD

0x00000124 (0x00000000, 0x86F10020, 0xB200040, 0x00000800


Intel Q8300,
4GB, DDR2
750GB,
Inno 3D Green Edition 9800GT
Foxconn G31MX-K Motherboard


Memtest passes fine.
Chkdsk passes Fine.
Reinstall Still happens :S

A:BSOD = 0x00000124

You need to fill out your system specs my sig has the link on how to go buy about setting it up.

Read other 2 answers
RELEVANCY SCORE 46.8

Hey,
the problem started a month ago, the screen freezes, just like that. Sometimes when you work in office, other times when you are on internet ...
After the freeze I restarted the pc but I could'nt find anything in the logs
An hour ago, it gives a BSOD with 0x0000124 ??? hardware issue?

the brand of the pc is LENOVO D20, but he's just out of warranty (july 2012)
type: 4155-22G

Could anyone help me?

Thanks alot in advance!

Geert

A:Bsod 0x00000124

Welcome,

There are no dump files in the zip attached. How old is all the hardware?

Go through this thread for best reference:
Stop 0x124 - what it means and what to try

Let us know if it helped in any way.

Read other 5 answers
RELEVANCY SCORE 46.8

Halp!

I have a recurrent BSOD, and it hits when my PC is just on the desktop doing nothing really. I think something might be up with the CPU but I've stress tested with Prime95 (ran ok for c.5 hours), and the temps are fine according to Speedfan. I can't seem to get the Windows debugger to download so I've not really be able to examine it in much detail but I've attached files below.

Any help would be MUCH appreciated
Minty

Edit: Got Windows Debugger to work... It says:

BugCheck 124, {0, fffffa800ee9a028, be000000, 800400}
Probably caused by : GenuineIntel
Followup: MachineOwner

Read other answers
RELEVANCY SCORE 46.8

hi

Im getting a bsod , just browsing, [email protected], playing something or pc is just idle. Components are maybe one month old. I dont have any ideas, tried everything already.
Fresh windows 8.1 and all drivers installed.
i7-4770k stock cooler
Asus z87-A
Corsair RM850
280x
SSD: Adata SP900 128gb
HDD1: 320gb
HDD2: 320gb
HDD3: 230gb
Ram: Kingston DDR3 8GB

Complete info https://www.dropbox.com/s/myhrf7zdis...02-06-2014.zip

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe0010557d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
------------------


BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
... Read more

A:BSOD 0x00000124

Only 23 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

E: drive only has about 0.7% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

This device has problems in Device Manager:





High Definition Audio Device HDAUDIO\FUNC_01&VEN_8086&DEV_2807&SUBSYS_80860101&REV_1000\4&3659EE06&0&0001 This device cannot start.



It's your Intel High Definition Audio. Please uninstall it, then download and install the latest, Win8.1 compatible version from the manufacturer's website

MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's in some Windows systems (it's driver is usually RTCore64.sys). Please un-install MSI Afterburner and Riva Tunere immediately!

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

I've seen BSOD issues w/Screaming Bee audio in the past, but nothing recently (but your drivers date from 2010). To tes... Read more

Read other 1 answers
RELEVANCY SCORE 46.8

Hi,

I've never had a problem with Windows 7 until today.

Today I was working online and the screen froze, a few seconds later I got the BSOD with Error 0x00000124.

I rebooted and the computer ran fine for about 10 minutes, then same BSOD error. I tried Restoring to several days ago, same problem, same BSOD.. (However, if I boot up in Safe Mode w/Networking, It doesn't crash!)

I don't know what to do? I can't seem to attach the .dmp file, it just says "Invalid File" when I try to attach it and I don't know how to open it?

I've attached the only information I have as of right this minute...

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8008F221D8
BCP3: 00000000B2000040
BCP4: 0000000000000800
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Anyone able to help?

Thanks!

-ThaChad

A:BSOD - 0x00000124

Please post the dump files by following the Blue Screen of Death (BSOD) Posting Instructions

You must copy the dump files to the desktop then zip them up and upload the zip file.

Read other 3 answers
RELEVANCY SCORE 46.8

I posted this incase a BSOD occurs, will upload my zip file momentarilly.

Hello, I've recently started getting the X124 BSOD and am curious as to what is causing it :/

Everything I have is, and always has been at stock, haven't needed to overclock my system. It was built in 7/5/2013

PC stats:
OS: Win7 Ultimate X64
Original OS: Win7 Ultimate X64
OS/OEM: I built the system, so loaded the OS myself. (I recently reformat, and did a vanilla install hoping it would remedy the issues.)
Age: 7/5/2013
Age of OS: Vanilla installed on 3/20/2013

CPU: Intel i7 4770K 3.5Ghz
Video Card: Nvidia GeForce GTX 780 3gig DDR5 ram
Motherboard: MSI Z87-G45 Gaming
PSU: I'll update it soon once I open my PC
HDD: Western Digital Caviar Green 2 TB Desktop Hard Drive WD20EARS


When it happens:

1) running Prime95 (the non-ram torture test) at around 80-85 degrees C core temps. I know that's high, however, the 4770k's limit temp is like 95, and melting temp is 105, right?
2) once while running Heaven benchmark on ultra, after about an hour and a half. GPU temp was 72C and CPU was at 10% load at about 50C
3) When playing 3D game's, Especially Tera, and Metro 2033

Thing's I've done:

I've done 4 passes of memtest86, and everything passed 100%

I've run bad sector tests on my 2TB HDD, and everything passed

I ran a full CHKDSK, nothing was abnormal

Things I'm going to do:

Step 6 on the BSOD posting instructions thread

swap ram to see if the memtest gave a false... Read more

A:0x00000124 BSOD hal.dll

Hi,

I'll take a look when you attach the dumps.

Regards,

Patrick

Read other 12 answers
RELEVANCY SCORE 46.8

My Girlfriend has recently bought a reconditioned laptop from PC worlds clearance store and it is getting the BSOD and a fuzzy screen (see attachments). I can't say that I have noticed any particular pattern with the blue screen but the fuzzy screen seems to happen every time I try to go on youtube and also randomly when idle.
Since I started to write this post on my other computer the laptop seems to refuse to blue screen all I can get is the fuzzy screen.

What I did manage to write down from my BS errors is:
0x0000124
0xFFFFFA8004CAD038
0x00000000F60020000
0x000000000000017A
0x0000000000000000

Its a Toshiba Satalite l450D-128
AMD Athlon Dual-Core QL-64 2.1Ghz
4Gb Ram

I have the same laptop so I have tried substituting the ram and hard drive but it still blue screens and I have stressed the CPU and it actually stayed on for 6+ hours (longest yet) I also tried testing the ram but it wont stay on long enough for the test to complete.

Any help would be greatly appreciated
Thanks
Dan

A:BSOD 0x00000124

  
Quote: Originally Posted by Danielb3


My Girlfriend has recently bought a reconditioned laptop from PC worlds clearance store and it is getting the BSOD and a fuzzy screen (see attachments). I can't say that I have noticed any particular pattern with the blue screen but the fuzzy screen seems to happen every time I try to go on youtube and also randomly when idle.
Since I started to write this post on my other computer the laptop seems to refuse to blue screen all I can get is the fuzzy screen.

What I did manage to write down from my BS errors is:
0x0000124
0xFFFFFA8004CAD038
0x00000000F60020000
0x000000000000017A
0x0000000000000000

Its a Toshiba Satalite l450D-128
AMD Athlon Dual-Core QL-64 2.1Ghz
4Gb Ram

I have the same laptop so I have tried substituting the ram and hard drive but it still blue screens and I have stressed the CPU and it actually stayed on for 6+ hours (longest yet) I also tried testing the ram but it wont stay on long enough for the test to complete.

Any help would be greatly appreciated
Thanks
Dan



Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

Some generic advice.

If yo... Read more

Read other 3 answers
RELEVANCY SCORE 46.8

This happened when quitting the Crysis demo. I've been having similar crashes for a while. I've overclocked my CPU, GPU and graphics memory before, but none of it is currently overclocked.
OS: Vista Home Premium x64
CPU: C2Q Q6600
Motherboard: XFX 680i LT SLI
Memory: 4GB OCZ DDR2-800MHz
Graphics Card: Palit 8800GT Super+1GB
Hard Drives: 2x Maxtor 500GB SATA-II
A picture of the error (Sorry it's a little blurry) :

Here's what WinDbg gave me from Memory.dmp:


Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, MCA_ASSERT
Arg2: fffffa8008045c6e, Address of WHEA_ERROR_RECORD structure
Arg3: 00000000b2000040, High 32 bits of MCi_STATUS MSR for the MCA bank that had
the error
Arg4: 0000000000000800, Low 32 bits of MCi_STATUS MSR for the MCA bank that had
the error

Debugging Details:
------------------
WHEA_ERROR_RECORD: !errrec fffffa8008045c6e

BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffffa60`0176a958 fffff800`01e0f72a : 00000000`00000124 00000000`00000000 fffffa80`08045c6e 00000000`b2000040 : nt!KeBugCheckEx
fffffa60`0176a960 fffff800`01f713b3 : 00000000`00000001 00000000`00000001 00000000`00000000 00000000`00000001 ... Read more

A:BsOD: 0x00000124

Sorry to say but the easiest way to fix it is to rebuild. I had the same problem and tried for weeks to fix. Reinstall and all is well.

Read other 17 answers
RELEVANCY SCORE 46.8

Not sure what this could be, Hard drive, Power supply, GPU? I have uploaded the debug file, Please help me if possible.
CPU: i7-4770k

MoBo: z97-A

GPU(s): SLI Asus Strix 970s

RAM: 32GB trident X 1866Mhz

Hard drives: PCI-e RADIR express 240GB / 2TB Seagate Hybrid

Cooler: Nepton 240m

Power Supply: Cooler Master 1200w Silent Pro Gold

A:BSOD 0x00000124 Over and Over

If you need anything else from me , please let me know

Read other 4 answers
RELEVANCY SCORE 46.8

Hello!

End of August, I started getting 0x00000124 BSODs, first 2 I got playing during TERA. Later on I didn't get any more BSODs while gaming, only during cold boot/restart/idling. After extensive googling and investigating I was left with opening PC and checking cables, reseating components. Cables were fine and then I started reseating, nothing changed. I still had my old GPU and tried swapping out, it worked and got no more BSODs for a week. I RMAed my new card.

~3 weeks later with my old GPU, same BSOD popped up while playing TERA. I haven't received any more BSODs while writing this thread.

PSU is quite old, Chieftec CTG-500-80p

Read other answers
RELEVANCY SCORE 46.8

my old os is vista and yesterday i format it and install win7 ultimate sp1 32 bit using bootable flash drive. i'm having the same problem . when i run my windows in normal modes blue screen problem occur repeatedly. now im using my laptop in safe mode w/ networking

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 85D68024
BCP3: B2000030
BCP4: 0C000E0F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\052913-19936-01.dmp
C:\Users\kulas\AppData\Local\Temp\WER-24648-0.sysdata.xml

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 85D32334
BCP3: B2000040
BCP4: 00000800
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\052913-13728-01.dmp
C:\Users\kulas\AppData\Local\Temp\WER-23805-0.sysdata.xml
thanks in advance

A:BSOD 0x00000124

0x124 errors usually point to a hardware error, this one in particular seems to be pointing to a problem with the processor:


Code:
kd> !errrec 85d6a8fc
===============================================================================
Common Platform Error Record @ 85d6a8fc
-------------------------------------------------------------------------------
Record Id : 01ce5c4f498bf5a3
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 5/29/2013 9:34:22 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ 85d6a97c
Section @ 85d6aa54
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x86
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x00000000000006fd
Processor ID : 0x0000000000000000

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ 85d6a9c4
Section @ 85d6ab14
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000000
CP... Read more

Read other 5 answers
RELEVANCY SCORE 46.8

Hi folks,

The only time I get this particular BSOD is when I have my nvidia video card installed. Could that be the problem, or am I just imagining it? I get another crash with my AMD video card

Do I just need a new motherboard? I hope I followed the instructions correctly.

Thanks!

A:Once a day BSOD 0x00000124 help please?

Please go to Windows update and in the left column select change settings, in the dropdown box select check for drivers but let me decide what to install.
Please go to control panel, category view, uninstall programs and uninstall all display drivers, AMD and Nvidia. follow this tutorial Drivers - Clean Left over Files after Uninstalling select both AMD and Nvidia then begin with step 9 in this tutorial NVIDIA Drivers - Avoid Problems. See if you have any better luck with youe Nvidia Card.

Read other 8 answers
RELEVANCY SCORE 46.8

i have Asus A42jc Laptop with spec:Intel i5-430M,2GB RAM,Nvidia 310M 1GB DDR3 64bit,Windows 7 ultimate 32bit
every time i play game that need high requirement like GTA IV,PES2010,POP Forgotten Sands,ETC
i always get BSOD with stop code 0x00000124.....
the period is random,sometimes i get BSOD after 1hour(but ussualy only 5minutes i always get this BSOD)

This is my BSOD error i check with BlueScreenView
Total 23 error(22 error with stop code 0x00000124.....)
and there only 1 BSOD error
(Stop code 0x0000009c....[MACHINE_CHECK_EXCEPTION])that different with the other 22 error

this is some my BSOD Error


Code:

==================================================
Dump File : 080110-23946-01.dmp
Crash Time : 01/08/2010 16:26:47
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 0x00000000
Parameter 2 : 0x87d5d01c
Parameter 3 : 0xf2000000
Parameter 4 : 0x00010005
Caused By Driver : halmacpi.dll
Caused By Address : halmacpi.dll+ef3f
File Description : Hardware Abstraction Layer DLL
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\Minidump\080110-23946-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================

==================================================
Dump File : 080110-19671-01.dmp
Crash Time : 01/08/2010 20:33:... Read more

A:Help me BSOD 0x00000124

I am not at home, with the ability to read your entire mini dmp. This is the information that you will be given regarding BC 124

Stop 0x124 - what it means and what to try

124 is a vague BC and can have many causes. Read the link that I left and you should be able to solve the problem.

Read other 9 answers
RELEVANCY SCORE 46.8

I have a system that craches with 0x00000124.

The system:

Windows 7 Ultimate x64
850W psu
phenom II 1100T processor
M4A87TD/usb3
Kingston HyperX 2x4096 MB DDR3 1600 MHz CL9 Kingston KHX1600C9D3B1K2/8GX
Gainward gtx 560 GS

Windows is fully updated and the system uses all the newest drivers.

I have looked at the dump file and what I can see it is a hardware issue, but which one?


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Thomas\Downloads\dump.rar\112211-38360-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\XPsymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02e12000 PsLoadedModuleList = 0xfffff800`03057670
Debug session time: Tue Nov 22 18:53:50.785 2011 (UTC + 1:00)
System Uptime: 1 days 3:55:33.940
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* ... Read more

A:BSOD 0x00000124

Hi.

Stop 0x124 error?
Is better though for us to have the minidumps.
http://www.sevenforums.com/crashes-d...tructions.html

Read other 3 answers
RELEVANCY SCORE 46

Hello I just put together a new desktop that I bought.

Intel Haswell i7 4770k
EVGA GTX 770
Asus Z87 - PRO motherboard
2x4 GB Corsair CMZ8GX3M2A1600C9

I have gotten the 0x00000124 error twice the day i built the computer, and i used BlueScreenViewer to see what was happening and it said the culprit was ky.sys. I installed all windows updates and the problem came back a couple hours later. There was another bluescreen with the code of 0x000007e and it said hal.dll was the problem. I ran sfc /scannow in cmd and it said files were corrupted and couldnt be fixed. So I reinstalled windows, after that I reinstalled my game (Rift) and kept playing and got the bluescreen (0x00000124) about 6 hours later. I realized I hadn't installed windows updates on this fresh install either. I am waiting for the updates to install but I have a feeling it will crash again anyways.

Sorry for not posting a dump file but my computer didn't save one on the last bluescreen. When it happens again I will update this post with the dump file.

From just this information is there anyway you can assume some of the hardware i bought is faulty? I built the computer last Thursday 7/11/13.

I do not think overheating is an issue at all. My Tower has 5 fans in it, my GPU has two built onto it and of course my cpu is using the one that came in the box. I ran some heat monitoring programs 5 hours into heavy graphics gaming and my cpu cores never went above 50c and my gpu never went above 70c.

EDIT: I just check... Read more

A:New Build BSOD 0x00000124

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Though it has a least to do with the crash dumps for a stop 0x124, but better to have a look before going for anything else.

Read other 1 answers
RELEVANCY SCORE 46

So i have to say this forum has been very useful in helping me diagnose other peoples computer, but at this moment I'm at a point where i need help. This BSOD keeps happening, one of the issues used to be a video card problem, that has been solved, with a GTX970. Now i fear the remaining issue is Memory related, i am not running any overclocking and my power supply is an Corsair HX750

Yeah, that original Memtest failure was only on Test 13 (RowHammer) from my understanding, unless your running ECC DDR3 has an >%80 failure rate

A:Random BSOD 0x00000124

Hello 0hanz33, I will try to help you. You only have one dump file, which is what we use to debug. You also failed a memtest, even though it was not the best test to use. As long as you have memory errors, there is little use in reading the dump files. Memory is like that, it can cause almost anything to be blamed when it is the cause itself. This is what the dump file shows


Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error condition.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800707e8f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.
I would think it is the ram, but if you would like to check it again, please do it this way.
Please Run Memtest86+



   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the inst... Read more

Read other 9 answers
RELEVANCY SCORE 46

Hi,

I've had the problem for a while but it's really starting to annoy me, basically my computer will randomly bluescreen once every other day when I'm not doing anything just leaving it idle at my desktop, and that's when I get the nvlddmkm.sys bluescreen, and the other time that's the most important is when I'm playing warcraft III, I get the bluescreen and it doesn't give me an .sys it just says it's a memory dump with 0x00000124.

Any help appreciated, thanks.

A:BSOD: 0x00000124 / nvlddmkm.sys

  
Quote: Originally Posted by KevinV


Hi,

I've had the problem for a while but it's really starting to annoy me, basically my computer will randomly bluescreen once every other day when I'm not doing anything just leaving it idle at my desktop, and that's when I get the nvlddmkm.sys bluescreen, and the other time that's the most important is when I'm playing warcraft III, I get the bluescreen and it doesn't give me an .sys it just says it's a memory dump with 0x00000124.

Any help appreciated, thanks.



124 is hardware use these to tell you what it means and what to try. http://www.sevenforums.com/crash-loc...-what-try.html

if the bluescreen mentions nvlddmkm.sys is your video driver remove all traces of the current driver and instll a fresh copy

let us know if you need help

Ken

Read other 1 answers
RELEVANCY SCORE 46

Hey. my computer has been getting BSOD.

I have always this bsod then i turning on pc, then i do nothing with pc or if i doing something but not in internet. Then i'm in internet i dont get bsod, but if i'm afk - i got bsod.

My pc info:
Intel(R) Core(TM)2 quad CPU Q9550 @ 2.83GHz 2.84GHz
4b RAM
32bit os

Where is the problem? P.S. Sorry for bad english

A:BSOD STOP: 0x00000124

Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

Read other 5 answers
RELEVANCY SCORE 46

Hello,

Since some months I have a BSOD on my computer: 0x00000124 WHEA_UNCORRECTABLE_ERROR. Firstly it used to appear when I was playing League of Legends during champ selection, but I realized that I also got BSOD when listening music on iTunes or on YouTube.

What I've already tried:

- I was on Windows 7 Pro x64, I formated the computer with a new Windows 7 Pro x64 but still have BSOD
- I installed Windows 8 Pro x64 after formatting, but still BSOD
- All my drivers are up to date
- I stressed memory with MemTest86+ without any error
- I stressed my graphic card with FurMark 1.10.3 without any error
- I stressed my CPU with OCCT 4.3.2 and I got the BSOD
- I clean up the computer to remove dust
- I changed the hermally conductive paste because my CPU temperature was high (70?C and over) but it's okay now (35?C, 50/60?C when playing games)

My hardware:
proc: Intel Core 2 Duo E6600 2.4Ghz
gc: nVidia GeForce 8800GTS
mb: MSI P35 NEO-COMBO

At the moment I'm wondering if the problem is coming for the processor or the motherboard. I doubt it happens because of corrupted drivers because I formatted the computer many times and unplugged all the externe devices during my tests.

I've attached all the debug info needed to this post, I hope it will help you.

Thank you in advance for your help

PS: my OS is in french I hope it won't be a problem for the debug info.

A:BSOD, 0x00000124 WHEA_UNCORRECTABLE_ERROR

Code:
BugCheck 124, {0, fffffa8004ebd038, 0, 0}

Probably caused by : GenuineIntel

Code:
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8004ebd148
Section @ fffffa8004ebd2d0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)
Status : 0xf200084000000800

Code:
FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS
It seems to be a bad CPU, however, with Parameter 1 obtaining the value of 0, then this may be a generic error produced by the WHEA error reporting, as a result it is best to stress test the CPU for confirmation:Hardware - Stress Test With Prime95
Enable "Round off checking" before the test (see first post below tutorial).

Read other 9 answers
RELEVANCY SCORE 46

Hi,

Below are my specs:
OS
Windows 7 Ultimate 64 bit
CPU
Intel i5 3570k
Motherboard
ASRock Z77 Extreme 3
Memory
8GB DDR3 Kingston
Graphics Card
AMD Radeon 7850 HD
Hard Drives
Extreme SATA III Solid State Drive 240GB

This is a custom built PC, a few days ago while messing around with XBMC and Chrome, my computer suddenly froze up and BSOD with the above error message (0x00000124 ). I restarted and shortly after the restart, same thing happened. Restarted again, and it didn't even get to the desktop before it BSOD'ed. I left it overnight and the following morning all was fine.

This happened every night (I leave my computer on during the day), with the computer in general getting slower as it went on (leading me to believe it is the heat causing it to reset) before restarting with the error.

So same thing happened last night, it reset and I left it. When I came out I turned it on fresh, half an hour later while messing with XBMC again it crashed (note: it hasn't always crashed with XBMC, I just use this as a HTPC so I am generally on that more). It kind of confused me since it hadn't been on that long. Booting into safe mode wasn't an issue, and I ran the diagnostic test, which is attached.

I've opened it up, and right now, have everything but the lan, mouse and keyboard disconnected, and so far, so good, but its also kind of unpredictable as to if/when it will happen.

Advice?

A:BSOD 0x00000124 error

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8009778028, b2000000, 81000402}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTA... Read more

Read other 1 answers
RELEVANCY SCORE 46

I had a machine that was giving me some issues for some time and the user complained enough to get a new machine. I am still having problems with the machine even after a fresh win7 pro 64 bit install. I have changed out the power supply. Changed the RAM, changed the hd and still having issues. It would sometimes restart while I was doing the instillation. When ever I finally got done with the instillation the pc would lock up and I would have to restart it. Now Iam getting a BSOD error. Any help would be appreciated

Motherboard: intel dp55wb
Video:Nvidia GeForce 8400GS
RAM: 8GB patriot
HD: 80gb wd800jd
PSU: HEC-500TE-2WX

A:BSOD 0x0000009c and 0x00000124

Analzying the latest dump file, returned a 124 bugcheck...


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007910028, f2000000, 10005}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
The WHEA_UNCORRECTABLE_ERROR bug check has a value of 0x00000124. This bug check indicates that a fatal hardware error has occurred.

If you are overclocking try resetting your processor to standard settings and see if that helps.

If you continue to get BSOD here are some more things you may want to consider.

This is usually heat related, defective hardware, memory or even processor though it is "possible" that it is driver related (rare).

A "stop 0x124" is fundamentally different to many other types of blue screens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

Generic "Stop 0x124" Troubleshooting Strategy:
Stop 0x124 - what it means ... Read more

Read other 4 answers
RELEVANCY SCORE 46

I have absolutely no idea what's been going on. I built this PC last week, and when I come back home Windows tells me it recovered from an error. I checked what the issue might be (I'm a BSOD noob, so please forgive me here if i'm wrong). The issue seems to be a file called "Hal.dll". I read in a post on another website that this error is a little different from the rest, so I need some help here. This has been going on for about a week now and I have no idea why.
Thanks for the help!

Read other answers
RELEVANCY SCORE 46

Hello,

I've been having problems with my laptop and performed the tests as instructed in "BSOD - Posting Instructions. The data of my system are:

Windows 7 x64
It is not the original system that came installed on the notebook (the original was Windows Vista Business x86)
System "Full Retail"
My system has 2.5 years (hardware)
My OS is newly installed (clean install).

I am very grateful if you can help me!

Fabio.

A:BSOD stop 0x00000124

  
Quote: Originally Posted by fgiovannetti


Hello,

I've been having problems with my laptop and performed the tests as instructed in "BSOD - Posting Instructions. The data of my system are:

Windows 7 x64
It is not the original system that came installed on the notebook (the original was Windows Vista Business x86)
System "Full Retail"
My system has 2.5 years (hardware)
My OS is newly installed (clean install).

I am very grateful if you can help me!

Fabio.



Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

Read other 1 answers
RELEVANCY SCORE 46

bsod the computer to open utorrent

A:BsOd utorrent? 0x00000124

Code:
BugCheck 124, {0, fffffa800509f8f8, 0, 0}

Probably caused by : GenuineIntel
The first parameter or argument has the value of 0x0, which is a Machine Check Exception, which means the CPU has detected a hardware problem and the address points to a processor error because the CPU has found one, so it could be a different form of hardware which is causing the issue.

In such a situation, it is best to use these steps:Hardware - Stress Test With Prime95
Enable "Round off checking" before the test (see first post below tutorial).
Stop 0x124 - what it means and what to try
All the hardware seeming to be running stable and tests reporting no errors, could mean a bad motherboard.

Read other 9 answers