Over 1 million tech questions and answers.

Lenovo 20FQ Driver for Lenovo 1TB m.2 2280 SSD PCIe NVMe, FRU 00UP414 Samsung PM961 who can help..

Q: Lenovo 20FQ Driver for Lenovo 1TB m.2 2280 SSD PCIe NVMe, FRU 00UP414 Samsung PM961 who can help..

On my Lenovo 20FQ...With Windows 10 64 bit Redstone 2 build 1703 with latest updates...Original Samsung NVMe Ver.2.2 drivers can not be installed...for the 1TB m.2 2280 SSD PCIe NVMe, FRU 00UP414 Samsung PM961only the Windows NVMe Standard drivers are accepted...With Windows Standard drivers too slow....who can help..Thanks in advance...

Read other answers
Preferred Solution: Lenovo 20FQ Driver for Lenovo 1TB m.2 2280 SSD PCIe NVMe, FRU 00UP414 Samsung PM961 who can help..

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


On my Lenovo 20FQ...With Windows 10 64 bit Redstone 2  build 1703 with latest updates...Original Samsung NVMe Ver.2.2 drivers can not be installed...for theThinkPad 1TB m.2 2280 SSD PCIe NVMe, 00UP414 Samsung PM961only the  Windows NVMe Standard drivers are accepted...who can help..Thanks in advance...

Read other answers

Original Lenovo configurationNVMe SSD Benchmarking on Lenovo 20FQ0044GE  The following pictures speak more than words...Nice job Lenovo and Samsung....each generation is better and better...The Yoga X1 20FQ run simultaneously  6 Virtual machines on ( VmWare Workstation 12 Pro)Linux ,OSX,Windows Server 2012r2 Datacenter,SQL Server etc.wthout any problems.....The System  is incredibly fast and quiet....24/7 since 2 months...Nice Job Lenovo... 10 Stars.....  ???? 

Read other answers

Hello,My understanding is that both the T460p and T470p support PCIe 3.0 x2 via their SATAe SSD connector. The T470p has an adapter on which an M2 2280 PCIe NVMe drive can be connected and get speeds higher than SATA.  The T460p on the other hand only has this one Toshiba SATAe drive to improve on SATA speeds, and that is limited to 256GB, it is rare and cancels the WAN port for further storage. So, can the adapter from the T470p be used in the T460p? This would solve all problems for the T460p, higher speed and good capacity. Thanks

A:M2 2280 PCIe NVMe drive for T460p using T470p's SSD 2.5 adapter. Will it work?

Hi, otheosyou wrote:> it ... cancels the WAN port for further storage.the combo m.2 wwan/ssd slot isn't assocoiated with main 2.5" slot for HDD/SSD, it's a separate slot. This combo slot supports m.2 SSD SATA III 22x42 mm in size only, not a PCIe one.I haven't seen the prooves that the bracket/adapter for m.2 PCIe SSD 2280 for T470p (there isn't the one for 2.5" PCIe SSD in T470p parts list) is compatible with T460p.

Read other 1 answers

I want know...  Which one ist faster?Which one is better?Which one has better drivers under windows 10?Which one runs cooler?

Read other answers

In this discussion, Amy from Lenovo recommends that we purchase Lenovo SSDs if we want thermal management: https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/Can-I-add-a-Samsung-950-Pro-NVMe-SSD-to-... The link no longer directs us to a particular model. So I perform a search on the Lenovo site and see (among others) this model: ThinkPad 256GB SAMSUNG PCIe NVME TLC OPAL M.2 SSD http://www3.lenovo.com/us/en/accessories-and-monitors/memory-and-storage/storage/HDD-BO-ThinkPad-M-2... What is this? A Samsung SSD rebranded as a Lenovo SSD? Would I gain in compatibility with such a drive or not, and specifically regarding thermal management? Also, is there a misprint below concerning the read speed? "ThinkPad 256GB SAMSUNG PCIe NVME TLC OPAL M.2 SSD supporting PCIe 3.0 interface standard up to 4 lanes shows much faster performance than previous SATA SSDs. It's sequential performance is up to 300MB/s for read operation and 1700MB/s for write operation by 4 lanes. Test-Prove 100% Compatible with ThinkPad machines. " That has to be 3000MB/S, right? 

A:Thinkpad-Samsung or Lenovo-Samsung NVMe SSD? What is this?

My impression is that even Lenovo themselves does not have a clue.

Read other 1 answers

For several months, I have had Samsung Magician 4.97 installed on my P70's Windows 7 and Windows 10  boot drives -- both are original Lenovo-suppled and installed 512 GB Samsung NVMe drives.  This utility offered limited functionality, simply recognizing the drives and allowing them to be benchmarked, tested and described but nothing else.  No ability to update firmware, adjust caching or over-provision the drives.  Moreover, Lenovo has previously not responded to my posted queries regarding how to update the firmware on these units, as they are out of sync -- one of the devices has a much older rev. level than the other and I dare not try to set-up a RAID array under these conditions. I was hoping the newly released Ver. 5.00 of Magician would remedy this.  However, circumstances have become worse, as the utility does not even "see" the two NVMe drives. Does anyone else have experience with 5.00 or a potential fix to the firmware update issue?  Any insights or opinions would be appreciated.  

______________________________________________P70, Xeon 1505 CPU, 64 GB ECC RAM 2 x PCIe NVMe 512 GB Drives, 1 TB HDD, DVD-RW, 4 K Display, NVIDIA Quadro M4000W700 model 2757-CTO (8 GB RAM, Crucial MX-100 SSD + Hitachi TravelStar 1 TB 7200 RPM Drives, Bluray R/W, NVIDIA Quadro FX3700M, WUXGA); Windows 7 Ultimate SP-1, W700 Mini-Dock

Read other answers

Yesterday I installed a Samsung 950 pro 256gb m2 pcie nvme ssd into a Dell E7270
Older configuration was with a sandisk regular sata 3 ssd. After replacement did a bios reset twice, once factory reset, once custom. (I left sata on ahci.)
I chose to install windows 10 pro x64 by using the uefi/gpt methode. Legacy options off.
Installation went without a problem. Afterwards I installed the Samsung nvme driver
Also the Samsung magician software. It reports a link speed 8Gbps (is ok), link width 16 Gbps (should be 32?) .
Is there a way to change the pcie link width from 2x to 4x? I thought this ultrabook did support x4.
E7270 i5 6300U, 16gb ddr4, Samsung 950 pro 256
comment would be appreciated :-)  Thanks in advance!

Read other answers

Hi All, I'm looking to upgrade the hard drive in this laptop as it seems to be the only real bottleneck performance wise. From what I can find online only the 2.5" form factor at Sata III 6 GB/s is supported, but there is an adapter for the M.2. form factor but still at 6 GB/s. My main question is is there something I am missing and is this laptop capable of having a PCIe NVMe SSD hard drive to achieve transfer speeds of 32 GB or is it limited to Sata III 6 GB/s because the port option isn't there? - Michael

Read other answers

up until windows preview build 14986, the pcie driver "Mobile 6th Generation Intel(R) Processor Family I/O PCI Express Root Port #5 - 9D14" (v10.1.1.27) correctly detects the "Standard NVM Express Controller" storage controller and the Toshiba THNSN5512GPU7 NVMe disk attached to it. starting with windows preview build 15002 (and 15007), the included pcie driver has troubles detecting the storage controller - during bootup, it is detected 4 times, with each time on a different device id. subsequently, the drive is also added 4 times, resulting in boot controller errors & timeouts and failed sleep mode/shutdowns. the included chipset driver in these latest builds seem to have been bumped to v10.1.1.33. the problem can easily be replicated by using unmodified recovery boot usb sticks made from the official isos, and then checking in a recovery console. it is thus not related to anything installed in my system.

Read other answers

I want to install a Samsung 960 EVO - 500GB PCIe NVMe - M.2 SSD as the primary boot drive of my P70. Can someone please confirm this newly released SSD from Samsung is compatible with the P70. Seems like Amazon is sold out so I'll need to finnd this drive elsewhere to order. https://www.amazon.com/Samsung-960-PRO-Internal-MZ-V6P1T0BW/dp/B01LXS4TYB/ref=sr_1_1?s=pc&ie=UTF8&qi...

Read other answers

According to my service tag, I should have a Toshiba 512 NVMe SSD drive.  However, it is a Samsung PM961.  Where can I get the drivers as these are non-existent on Samsung's website?

A:Laptop shipped with Samsung PM961 512 GB drive, where is the driver? Service tag shows I should have a Toshiba and it isn't on the driver download page.

All of Samsungs SSDs that end with a "1" are OEM units - drivers from the system vendor.  Models that end on "0" are Samsung supported retail drives.
They're listed here as well.

Read other 1 answers

Hi All, I am also checking on different forums and documentations whether there is any experience with using SAMSUNG 512GB 950 PRO M.2 PCIe 2280 MZ-V5P512BW in HP ProBook 450 G3 (Skylake architecture).I have the currently latest BIOS version 01.10 Rev.A (12 Apr 2016).I wish to use the card in PCIe and NVMe mode. Is there any recommendation from HP and or test that the above mentioned SSD would work well with the mentioned laptop and BIOS configuration? P.S.: I did check the ?Maintenance and Service Guide? but it does not provide I think specific information to that.

A:HP ProBook 450 G3 and SAMSUNG 512GB 950 PRO M.2 PCIe NVMe mo...

Hi!, @Misi_ Welcome, to Forum !. You can see, the availables devices for your HP Probook 450-G3, from ... http://support.hp.com/us-en/document/c04792126

Read other 2 answers

For my recently bought E5570 Latitude I bought an new/bigger/faster SSD.
It's the Samsung 950 PRO with the PCIe connection and NVMe support.
I have created an Windows 10 install USB to doe a fresh install but windows does not see/detect the drive.
-edit-I was able to install windows by loading the F6 drivers for Intel Rapid Storage.
But not the less funny part, I only hit about 1000Mb/s reading while it should be around 2500Mb/s.Now samsung has a special NVME driver but that states no NVME drive is installed.Also samsung magician does not detect the drive correctly. The name is all weird and it has 0Gb storage.
Did anyone already come accross this issue?And if so how did you solve it

A:Windows 10 does not see/detect Samsung 950 PRO M2. PCIE/NVMe drive

Here is the guideline from Dell: 

Im also interested in E5570, some questions:
1. Quite many user reviews complain about high-frequency noise coming from mobo or PSU unit. Can you confirm?
2. Would you know if any available Dell SSD option is actually NVMe?
Also, the trouble is, you have to buy M.2 SSD from Dell in order to get 6cell battery.

Read other 4 answers

Recently purchased a Samsung 960 EVO - 500GB PCIe NVMe - M.2 Internal SSD and a Ableconn PEXM2-SSD M.2 NGFF PCIe SSD to PCI Express 3.0 x4 Host Adapter Card thinking I could use this combo to boot to a SSD.  The computer is a HP Envy 810-150se.   The motherboard is a Pegatron IPIWN-PB (Bios PI2_818.ROM v8.18).  The current harddrives are 2 WD 10EZEX 1.0TB drives in the RAID config.   The SSD drive was recognized and I was able to clone the C: drive using the Samsung Clone software but when I reboot I don't see it at all.  I've looked through the bios settings not finding anything that I think would help. Can this be done?  Is there a newer bios to update?  Does the RAID config need to be turned off?  Do I need to disable the non-used SATA channels? My fall back plan is to get a SATA SSD and use that but I think the PCIe NVMe is much faster. any help would be greatly appreciated. Thanks,  Mike

Read other answers

Has anyone installed an m2 nvme SSD drive in an Aurora R4 via a m2 to pcie adapter and configured it to boot from it?
Hoping it is possible.


A:(Redirected) Alienware Aurora R4 Samsung 950 NVME m2 pcie adapter

Hmm.. I think it would have to be available in BIOS/UEFI and i'm not sure the R4 would have that.  I would post here in the Alienware community to double check.

Read other 2 answers

My laptop: Inspiron 15 5577 gaming laptop with intel chip (7th Generation Intel® Core™ i7-7700HQ Quad Core (6MB Cache, up to 3.8 GHz))
1. I disk cloned my 128GB M.2 SATA ssd drive using Macrium Reflect (v6.3.1812) by boot up using USB jump drive. 128GB clone->500GB thru usb 3.0 connection.  After the clone, I checked and see that all partitions are cloned successfully.
2. I swapped out my 128GB for Samsung NVMe SSD 960 EVO; I boot up using Macrium Reflect to clone my Samsung NVMe SSD  from my external usb 3.0 500 GB; after the clone, I disconnected all external devices and tried to boot up from Samsung NVMe ssd.  BUT IT FAILED.
I received the following error messages:
Rom image is not loaded
Rom image update denied.
Please let me know if someone had done this.
Thank you very much.

Read other answers

For all people who are not sure....here is the ProofModification from my Lenovo 20FQEverything works at the same time....without a problem....   ThinkPad Sierra Wireless EM7455 LTE-ModulLenovo WLAN card Intel 18260 WiGig Dell WLD15 (4K support..etc..better than Lenovo WiGig Dock )Microsoft Lumia 950: Wireless Continuum

Read other answers

Hi, I have a fresh install of Windows 10 Pro (x64) on my X1 Yoga, installed in UEFI mode. I wish to encrypt the drive with Bitlocker with TPM and PIN. Another user on a different thread alluded that this is not possible as the X1 Yoga I have uses a PCIe-NVMe disk, for which there is no hardware support for Bitlocker. Is this correct or am I confused?

A:Lenovo X1 Yoga (20FQ) BitLocker with TPM and PIN

I meant you cannot use the AES hardware engine of the NVMe SSD (if a SED like the OPAL2 option) - but you can use software BitLocker just fine. This means the CPU will have to do the crypto instead for some performance penalty depending on your I/O - see CPU utilisation during a benchmark for example. Also do note that using FDE (full disk encryption) on a SSD is not "great" as the whole disk "looks full" to the SSD - so you may need to over-provision for best performance. You can also use "encrypt only used space" instead. There are pros and cons for each.

Read other 2 answers

??????????, ????? ?? ?????????? ? ??? ?????? ?????????????? SSD  Intel Optane ? ? ????-??????? M.2 2280 ? ????? ?????????? ??? ??????? ????? ?????????? ??? ??????

Read other answers

Hello, I have decided to do a clean install of Windows 10 Professional (x64) on my Lenovo X1 Yoga (20FQ). I'm currently pulling my hair out trying to install Windows 10 in UEFI mode, I want to do this so I can use the full functionality of the TPM chip and bitlocker. No matter what I do I have not been able to install Windows 10 Professional (x64) in UEFI mode, I've only been able to install it in legacy mode. I've tried multiple configurations of the BIOS in terms of disabling Legacy/enable UEFI OS to boot but when I put the BIOS in UEFI only mode the Windows 10 Professional (x64) USB key (that I've created using the .iso downloaded with the Microsoft Download Tool), the machine refuses to boot from the USB key or the PCIe-NVMe when in UEFI Only mode. Can someone point me to a guide for installing Windows in UEFI mode?

Read other answers

Since you have to hunt around different Lenovo sites (and other sites) to find out about these softwares, I decided to make a post to get feedback from actual Yoga owners on how these programs interact, what they do, which ones are prerequisite, and which ones are unnecessary. Please don't take this as a blanket answer. This is just what I have found. It might be right - it might be wrong. I'm looking for others to post their experiences as well. Lenovo System Interface Foundation Driver - Necessary prerequisite (missing driver in device manager without it). It allows the Lenovo Utility and Lenovo Companion to work. Lenovo Yoga Mode Control - Necessary if you want to use your yoga to seemlessly change between all the different modes (laptop, tablet, tent, stand). This software is responsible for autorotating and putting Windows into tablet mode. Lenovo Utility - Recommended(?) This one I'm not too sure on. I remember that I was missing some function that I wanted but I can't remember what it was now. Maybe battery cycle count and health? Lenovo Companion - I don't have this one installed and don't think it's necessary but would like someone else to shed some light here.

Read other answers

Hello Friends.  I successfully installed a Samsung 950 Pro M.2 SSD as a boot drive just fine.  However, it looks like the Windows 10 NVME driver is being used in place of the Samsung NVME driver.  I saw this post here where it says: "Windows is indicating it is using the NVMe driver for this drive." https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Envy-750se-capable-of-M-2-NVMe-... However I do not know how to determine this myself.  I am using a utility called "AIDA64 Extreme" and it's telling me the driver provider for the 950 is Micrososft and the driver version is 10.0.14393.0.  So, how do I get the 950 to use the Samsung driver instead?  Thanks for any help. 

A:How to tell if Samsung 950 Pro is using Samsung NVME driver ...

Hi, From Samsung tool (Samsung Magician), it shows my machine uses Samsung firmware, no information about driver. It uses Microsoft driver. The tool allows use to check and update firmware but not driver. Regards.

Read other 1 answers

I just bought this MX300 M.2 SSD (CT275MX300SSD4) from amazon, but i could not get this m910 tiny recognized in bioshow can i get this M2 worked and recognized by the Bios or i need to buy another PCIe NVMe - M.2 Internal to take advance of the M.2 slot on m910 tiny?Thank you

Read other answers

I tryng to install Windows 10 Enterprise  in a Laptop Alienware 17 R4 but when start the installation it miss the driver for the SSD SK Hynix PC300 PCIe NVMe. 
I've looked for Dell Support page but i found only Intel Rapid Storage Technology Driver and Management Console and the Firmware for SSD but no driver
There is a link where download that driver in order to provide it during the installation??
Tanks GIO

Read other answers

I have been looking at an intel 600p and i wanted to know if it supports it

Read other answers

HI Lenovo community!I want to upgrade my t470p hdd   to  NVMe M.2 2280 Samsung 960 PRO and enjoy full speed.I read that I need adapter  but I dont know which one and will a achive full speed 2100/3500MB/s with this adapter? 

Read other answers

Hi, I tried to install the Lenovo Power Management driver on my Lenovo B590, after instal and restart is nothing happens. I can't start the application, is not appear anything. What is the problem? my OS is Windows 7 Ultimate x64 please help! Thx and sorry for my bad english

A:Lenovo B590 Lenovo Power Management driver no work

hi Reichtofer,
Thanks for Posting!
Try opening Control Panel / Uninstall a program and uninstall the Lenovo Energy Management / Power Management Software,
   Restart the system if prompted.
Now download and install this
     Lenovo Power Management Driver  
If  after the installation you were able to see a shortcut icon on your desktop,
    try navigating Crogram Files or Program Files x86 
            now look for Lenovo Folder and It shouldbe located there.
Hope this helps

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers

I have a problem with the Lenovo Systems Interface Foundation Driver. It's not working although it shows under System Devices to be installed, the latest version, but I cannot use any of my Lenovo apps. Under events in Systems Devices it has a note that says : "Device ROOT\SYSTEM\0003 requires further installtion" What can I do th get the driver working as it should. Thanks 

Read other answers

Hi guys i just insalled Windows 7 on Lenovo G50-30, but in download section on lenovo site thers a missing drivers for Lenovo Energy Managment, so any idea where i could get it ?!

Read other answers

Hello.I've seen that there is an update from yesterday called Lenovo Energy Management driver for Windows 10 (32-bit, 64-bit)  that is supposed  to update acpi driver in windows 10. I have windows 10 since august but when i execute the file nothing happens. Any suggestion?

A:Lenovo g510 Lenovo Energy Management driver for Wi...

Same here. Suspicious too that the download is only 1MB when the actual Energy Management install is about 55MBs.

Read other 9 answers

I have a Dell XPS 15 9560 with a SK Hynix 512GB who gives me 1,800 and 800 mb/s.
I have the option to choose a Samsung PM961 512GB and I want to see a real benchmark from anyone, I want to confirm that this drive is faster.
I can not find recent reviews about it.
If I can get more speed, would be awesome for me.
And yeah I can notice the difference between my 960 EVO on my desktop and my laptop (SK Hynix 512GB).

Read other answers

Hi,I am purchasing a 15" Lenovo Y700. Also, upgrading it with a Samsung 850 EVO M.2 SSD, pretty common, I know. However, I was looking into these NVME based SSD's, particulary - SSD Samsung 256GB ZVPV256HDGL and how they are faster, but I can not find any information showing that the Lenovo Y700 will be capable of utilizing the capabilities of such an SSD or even support it. If anyone can enlighten me on this matter I would be really grateful.Have a nice day 

A:Lenovo Y700 SSD NVME support

The Lenovo Y700 supports  M.2 SATA SSD, which isn't PCI-E based NVME storage. The Samsung 850 Evo is probably the fastest option for this laptop. 

I'm a Lenovo advocate, part of the Lenovo INsiders program. I'm a volunteer; I don't work for Lenovo.

Read other 2 answers

hello , I found this SSD Samsung 1TB PM961  , please i need help , Is this compatible with Thinkpad X1 carbn 3rd? Thank for your help

Read other answers

I have just purchased a new Dell XPS 8920 that comes configured with a 250GB NVMe M2 drive as the boot drive and I?d like to replace this with a Samsung 1TB 960 Pro MVMe M2 drive however I can find no way to load the Dell OS Recovery in a way that it can see the new disk and load Windows 10.   BIOS sees the drive, but not the recovery tool.   Has anyone got any suggestions or tried to do this?

Read other answers

I know that 15 inch support but does the 17 inch has it to i couldnt find a answer online for 17inch?

Read other answers

Hello, I have a Lenovo n22 80S6 I had seen where other people got the M.2 NVME Drive Work and responding properly so I ordered a Samsung 960 EVO NVME Drive for the laptop. The bios will not recognized the drive at all. I have update the bios to 24WW and still nothing. I have tried to install Samsung Drivers, but they wont install till the Drive is Mounted. Please your help is welcome.  

Read other answers

I have a Samsung PM961 1TB installed on my laptop and I want to get the maximum performance, reads and writes.

Should I use AHCI mode or RAID mode in BIOS?
Should I install Samsung NVMe Driver?
Should I install Samsung Magician Software?.


A:Dell XPS 15 9560 with Samsung PM961 1TB, AHCI vs RAID?

Same question

Read other 2 answers

Hello, I have the following laptop ideapad700-15isk with i5-6300hq, 8gb of ram, 950m 4gb and a 1tb hdd.I want to buy a m.2 ssd and use both hdd and ssd. The ssd would be use for OS and the hdd for storage of files.From what I've read I understand that both samsung 850 evo(sata3) and samsung 960evo(nvme) would work.My question is would the samsung960evo(nvme) disable my sata 3 port and would not allow me to use in the same time the hdd?And is the speed difference from 850 evo to 960 evo worth for daily use? OS and Browser activity? Thank you,    

Read other answers

HI, so i'm thinking about buying this,  https://www.microsoft.com/en-ca/store/d/lenovo-ideapad-flex-5-14-2-in-1-pc/91jb40s7kj8g/h3lk?activet... i'd like to know, if it supports PCI NVME drives.  I know it has an M2 slot, as well as a regular sata 2.5 slot, so i can put 2 drives, both SSD at once.  But for the m2 slot, would it have to be SATA or can it be NVME?  Thanks for any help.

A:Lenovo Ideapad Flex 5 14 2-in-1 PC , 81C9000CUS - does this support PCI NVME?

Hi shynepo3,
Welcome to the Community Forums.
The Flex 5-1470 (Type 81C9) Laptop / part number 81C9000CUS must be a M.2 NVMe SSD.
Storage specification:
Some: HDD / SATA 6.0Gb/s, 2.5" wide, 7mm highSome: M.2 SSD / PCIe 3.0 x 4
OEM recommended M.2 SSD listed here PCIe-NVMe for model 81C9.
Hope this helps answer your query.

Read other 1 answers

There is a full article on this at http://www.geektech.co.nz/high-performance-nvme-ssd-capped-at-pcie-2-0-speeds-y700 I have just purchased a Samsung SM961 SSD which is capable of reading up to 3GB/s. I could confirmed at the SSD speed is capped at about 1.6GB/s on Lenovo Y700-15ISK. Lenovo please release a BIOS update to unlock NVMe SSD speed.

Read other answers

after windows logo blue screen 0x000000b, installed on nvme SSD

Read other answers

Specs:Lenovo Y700 15ISK with Intel Core i5-6300HQ/8GB/1.0TB/NVIDIA GeForce GTX 960MNVMe SSD:  *MZVPV128HDGM-00000, http://www.newegg.com/Product/Product.aspx?Item=9SIA12K3FG3514BIOS settings all default, just Secure boot and UEFI is on. Tried lots of BIOS settings but none on them help with issues.WINDOS 10 PRO 64-bit. Laptop works like a charm with only one HDD. but when I configure and install windows on SM951 NVME 128gb m.2 ssd (SATA cable unplugged for HDD) laptop  with installed identical updates as on HDD it  can't restart/sthudown/ sleep on NVME ssd.. Anyone had any similar issues with M.2 SSD install ? I use GPT on both drives (Clean it with DISKPART) and also GPT to UEFI install on Rufus 2.7. The only strange thing to me that alone laptop with HDD performs as it should with identical drivers installed, but when I plug M.2 SSD it get read speeds of ~1660MB/s but i'ts annoying as hell when I can't restart/shutdown/sleep.. I have option to use only HDD, but then i sooo slow, even my old acer from 2012 with SSD works faster than Y700 with HDD... This solution didin't helped aswell as power option settings etc... "Thank you for your help. I have fixed the issue by reseting defaults in the bios menu. and reininstalling energy manager and lenovo utility. I learned this from another forum .quote:Turn off the pc and use the Novo key (item 5 page 6) to launch novo menu and choose BIOS set up.The Exit tab in ... Read more

A:Lenovo y700 15ISK sleep issues with SM951 M.2 NVMe...

You might want to wait till BIOS v30 before you call it fixed.

Read other 5 answers

Good Evening EveryoneI have the "old" lenovo 7298D1U it does have 1 full size PCIE x16 , i plugged in a new Sapphire RX 580 Nitro+ GPU  , but it didnt work and the machine wouldnt turn on.  Works when i unplug it.Does this lenovo even support such a new GPU or maybe the CPU is too old to accept such a new GPU.thanks

Read other answers