Over 1 million tech questions and answers.

LAPTOP FELL

Q: LAPTOP FELL

Hi My laptop fell and needs attention. It is still under warranty so what can I do Thank you

RELEVANCY SCORE 200
Preferred Solution: LAPTOP FELL

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: LAPTOP FELL

Usually the warranty will not cover accidental damage. You do not give us the model number or anything to work with here. What happened and what is damaged?

Read other 1 answers
RELEVANCY SCORE 53.2

I bought a compac 6 months ago. It fell on the floor and won't start. Any ideas what could be wrong with it and what I need to do to get it to work.

Thanks in Advance.

Read other answers
RELEVANCY SCORE 53.2

My "W" key fell off recently and cannot be snapped back into place.  It looks like the plastic pieces below the key have some damage where some plastic may have broken off.  How can this be fixed?  Is there somewhere this can be replaced / fixed?  Thanks.

Read other answers
RELEVANCY SCORE 53.2

hi my laptop just fell, i turned it on and it gave me a good start up, a little later it went black and i had to turn it off, but i dont know what's going on can someone please help me?
 

A:My laptop fell

Did it turn back on?
 

Read other 10 answers
RELEVANCY SCORE 52.8

Greetings, My two month old laptop fell on the cement while it was in my protective bookbag and it shatterd the screen from the top left corner. It's pretty badly damaged, the touch screen doesn't work at all for the entire left side. The pc is bought in The States. Is there any way I could get this fixed soon and if so, what would the cost be? Thank you.

A:My Laptop Fell on the Cement :(

Hi,You can find an authorized service centre in your are and contact them for prices. It is a quite straightforward fix even if the screen can be quite expensive.http://www8.hp.com/us/en/store-finder/find.do?bs=SR4&type=authorized Hope it helps,David

Read other 2 answers
RELEVANCY SCORE 52.8

Hi my hp laptop can't reboot stop s at the blue hp logo. It fell on the floor. What can I do??

A:Laptop can't reboot fell over

That type of error is normally caused by either damaging the hard drive or forcing the connection by the drop.  When you open the unit to check on a loose connection, be prepared to replace the hard drive.

Read other 1 answers
RELEVANCY SCORE 52.8

My laptop fell on floor. It did not real damage; however, now my keyboard behaves a little erratic, meaning it behave like some different letters and the return button sometimes.

I have built a computer before. My question is, is it safe to take it apart incase it has moved a little to move it back, or if a key button has moved?

Kind regard tech land.
 

A:Laptop fell on floor

Maybe the keys were a little loose and the underlying rubber pads are not aligned with the "outside" keys?
if you can have the laptop keyboard checked/aligned (for a minimal fee) would be wise.

in the meantime, if you agree with me, you can use a cheap usb keyboard as a temporary fix for your keyboard problem.
 

Read other 2 answers
RELEVANCY SCORE 52.8

Recently my laptop went off (not fully) due to accidental fall.

It stopped booting from hdd and an error ""hdl.dll" missing in root" started appearing on screen.
I tried to boot it from a bootable cd but the cd drive have lost alignment so dont read properly and hangs in between.
Couple of tries and i could boot in dos once and found that system and system32 are missing from c drive.
i also tried to recopy missing dll but didn't work.
Scandisk also did not work and hanged on the way.
Had to replace dvd writer to boot from a cd properly.
A thirdparty disk repair program sorted several cross linked files and at last i could install microxp on c drive to boot.
But it was a clean new boot so lost my all installed programs.
Recovery console of xp also tried.
Tried winxp pro but no way to recover old "documents and settings" though whole \program files folder is intact if browsed through explorer, it is not visible in through "start" button. Neither recover old registry etc etc. Network settings, drivers for other hardwares are lost.

Is there a way to get back all my old settings?
Thanks for reading.
Waiting for a solution......

A:Laptop with WinXpPro fell down! went off

saying you accidently dropped your laptop minor fall. no fall is a minor fall to wreck a hdd. I bet the hdd is fried. replace and report

Read other 2 answers
RELEVANCY SCORE 52.8

I have an Lenovo ideapad Y430. It's Control(ctrl) key fell out. I don't know how to put it back in. I've tried pushing it back in, but that didn't work. I've looked all over the internet. I've found nothing. Anyone haves an Idea how to get it back in.

A:My laptop ctrl key fell out!

did you break it or does it fell out?if you break it, don't waste your time, you need newer keyboard module. and you can contact lenovo support line for this issue.if it falls out, you can put it back. ( no need to change keyboard module )http://www.youtube.com/watch?v=7ubCUgvOCiohttp://www.youtube.com/watch?v=oL4iTWxxJC8http://www.youtube.com/watch?v=v4_gPRKlpqI 

Read other 3 answers
RELEVANCY SCORE 52

this is a notebook mechanical question.  Didn't see a group for that. The slider on the latch that locks my notebook closed, popped out.  It has two tabbed hooks on it, not broken, but I can't seem to snap it back in so it stays.  Has anyone done this before...is there a trick to getting it inserted the right way  so it will stay in?  Or does this mean there is something broken inside the latch that this used to snap into?

Read other answers
RELEVANCY SCORE 52

bothe the main screws have fallen out of my laptop....they have never been touched since purchase....the 2 closest tp the scree/keboard join at each corner.... please arrange to send me 2 replacements as i am travelling and nowhere has them...

A:screws fell out of the back of laptop

We can't send you screws. And screws do not just fall out. Are you having issues with the screen hinges?

Read other 7 answers
RELEVANCY SCORE 52

Dropped laptop. It turns on but nothing shows on screen. I really need help!!! Have HW due! Please help.

A:Laptop fell, it comes on, but won't display screen

Obviously gravity did its bit. It's not the fall its the quick stop at the end. Does it seem that it is coming on just nothing on the screen? Do you have an external monitor to hook up to it? 

Read other 2 answers
RELEVANCY SCORE 52

How do I get my computer toWork right again not sure what buttons were pressed or what exactly happen when it got bumped..it was working.g fine now it says boot device not found. Install a operating system on your hard disk.hard disc(3f0) f2 system diagnostics

Read other answers
RELEVANCY SCORE 52

Hei hei folks. Unfortunately my X1 carbon fell down from about 2 meters.Feel free to point out my stupidity for that (: When I tried to turn it on the LEDs went on, but the screen just showed some weird piece of art instead of BIOS output. Now additionally, I hear 2 short beeps before it turns off again.I googled, and apparently this can mean eitherthe POST returned an errora mainboard failure I tried to connect it to an external monitor, but there's no signal during the short time it's on. My plan would be to buy a new LCD panel, because it's obviously broken ? and hope that the beeps just come from the POST failing to check the LCD. Do you think it's too early to buy a new panel, should I try to investigate more?Is it worth fixing if the mainboard is broken? How could I find out? Thanks for your honest opinion.

Read other answers
RELEVANCY SCORE 52

hi everybo.
dy,
i need help. my laptop fell and now when i turn it on my fan is making a whiteling sound. it still works but i get a black screen with a text ,

windows error recovery

windows failed to start. a recent hard or software change might be the cause.
if windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. if power was interrupted during startup, choose star windows normally

launch startup repair(recomended)
start windows normally

i tried starting with windows normally and it said(after the screen was black for a long time)

windows cannot be started

and then it send me to:

system recovery options

i select US keyboard, and clicked on next. it said

system recovery options

non of the suggested options helped. i dont wanna do it with the recovery disc yet, since i dont wanna loose all my data.

HEEEEEEEEEEEEEELP!!!!

A:laptop fell, cant get to reboot windows

Welcome
This is all we have. You may have to reinstall or use recovery. If it was from a fall it sounds like hardware. In that event trying to boot will not work. You must bring it in for repair.

If you create a recovery DVD, you may be able to boot to recovery options
Create A Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.





Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? I... Read more

Read other 3 answers
RELEVANCY SCORE 52

I took my hp laptop to meet with a client. When I returned to my office, the laptop could not see the wireless network.

The other computers in the Workgroup can see everything on the network except the laptop. The laptop can't see anything.

What do I need to do to get the laptop back into the Workgroup so it can access the wireless network and the other computers (2 Macs and 2 PCs) can access it?

Thanks very much

Read other answers
RELEVANCY SCORE 51.6

Can hp send me some screws? My product is out of warranty

A:The screws on my laptop fell out and the hinges are loose as...

We need your exact model number. Screw kits are available on eBay for maybe $6-10. However, screws don't just fall out. They get stripped because something else is going on, likely hinge issues. The hinges freeze up and cause stress on the screws so that they get stripped out of the holes which means if you try to put a new screw in the same hole it will fall out, too. 

Read other 1 answers
RELEVANCY SCORE 51.6

Hi, thank you in advance for any and all replies!
My toshiba satalite laptop fell and the hard drive needed to be replaced. It came in the mail today and I installed it without problems but when I try to start I get this sole message: Boot media (failed). And I don't have a windows 8 installation disc-did not come with laptop/I'm suppose to burn one off this laptop but haven't had a change yet
What is going on?
Do I need to buy a new windows 8 OS from Toshiba too???
Jennifer

A:Can't install/boot OS after replacing HD (laptop fell...)

Contact Toshiba, see if you can get a recovery disk from them.

Read other 34 answers
RELEVANCY SCORE 51.6

Windows 10.  How the heck do i get back in when i forgot my dang password?

A:I just bought a Ho laptop,set the password,fell asleep and f...

Hi!, @NancysNuthouse: Welcome, to HP Forum !.  Press ENTER key 3 times and you'll get system halt/disabled code.Next time, copy or write in Code and press Get Password, from ... https://bios-pw.org The generated code is the correct password. Note: Save these code, to use in future.

Read other 1 answers
RELEVANCY SCORE 51.6

the battery of my laptop ( windows 10 HP) fell out, and after searching the web for help or ideas on how to start it up (because it wont) i've concluded that i need some tech help.

if you have ANY ideas on how to help, PLEASE CONTACT!
i've tried taking out the battery, pluggin in the charger, NOTHING WILL WORK.

A:HELP! battery fell out of laptop now it wont start!

We need a lot more information
Can you please tell us the Model# of the HP laptop?
The laptop can run without the battery in it just using the power adapter.
Without the battery in, what happens when you press the power button? Do you get a black screen and no lights or fans? Or what?

Read other 1 answers
RELEVANCY SCORE 51.6

hi i dropped my dads laptop yesterday, not a bad drop, just from a bench one feet above the flooe. since then, its been makin odd noises that go klick thwunk klick add random times. its booting up and everythings normal, but is the harddrive dying?
 

A:laptop fell, wierd noises inside

Read other 16 answers
RELEVANCY SCORE 51.6

I put my laptop on a small table.As I pulled the end of my carpet to fix it, the table accidentally flipped with the laptop.I didn't really paid attention when it fell but as far as I can tell the back cover of my laptop hits the floor along with the table.So I lift them up back to normal and continued browsing the internet.
 
The problem came the next day in the morning.As I was browsing reddit, the cursor starts moving on its own to the edge of the monitor. As for which side of the monitor, It's completely random but most commonly it's either upper right corner or bottom left corner.Continuing the story,I restarted my laptop and it still didn't solve the issue.Also tried google searching but no luck.
 
Here's a list of things that I have tried:
Reinstall drivers
Closing any third party programs
Restart the computer
Scan the computer using Malwarebytes 
And here's my laptop's specs:
Dell Latitude e5410
4gb Ram
Intel core i5
Intel Hd graphics
Windows 7 
Any help or suggestions would be greatly appreciated.
Thank you.(If you don't understand anything I said just ask me because I'm not a native speaker sorry.) 

A:laptop fell and cursor starts moving on its own.

Just by the fact this problem happened after the drop would indicate it's a hardware problem and not a software problem. It could be the trackpad itself or the connection between the trackpad and motherboard. If you are comfortable disassembling the computer see the below Ebay page otherwise take it to a good shop. Make sure the wired connection is secure.
 
https://www.ebay.com/itm/NEW-DELL-Latitude-E5410-Trackpad-Keyboard-Cover-Single-Click-Palmrest-3M0NW/121724702004?epid=1448537246&hash=item1c575b8d34:g:0NMAAOSwDNdVxNPL
 
Service Manual

Read other 6 answers
RELEVANCY SCORE 50.8

Hello everyone,

A hard object fell on my laptop. Now it freezes even in safe mode. Obviously a hardware problem. How can I isolate which part is responsible? Thanks.
 

A:Laptop fell. Now freezing even in safe mode. Solution?

Read other 7 answers
RELEVANCY SCORE 50.4

I'm sorry to post this on the General Chat but It's really urgent Hello so I was sleepy but didn't want to sleep and decided to put on an audio book while lying with my laptop on my upper legs and I forgot I had it and as I turned around it fell. Nothing is broken no wrong sounds or anything. The windows however annoys me.When I turn it on it then loads for a longer while and then says something along the lines of encountered a problem we will restart for you to gather info or something. Then it restarts goes into automatic recovery and then that screen disappears and leaves just a grayish screen, after some while of waiting it goes into a loop it restarts again and goes into automatic recoveryWhat should I do please help (writing this from PC which has w7)I'm not sure which win my laptop has, when I looked at the online store it said 8.1 when I look in the papers it says 8 so I'm confused, maybe they just write 8 but it's really 8.1HELP PLEASE! THANKS :D   Toshiba Satellite S875D - S7350  some guy says I should check system partition for filesystem errors, my friend says I should try swf scan or whatever it's called ( I can't access cmd promt though) also my friend says I should try this: go to f12 - enter setup - advanced - boot mod - csm bootWhat should this do though?(On F12 I have boot hdd, usb, odd, lan, enter setup, hdd recovery)     INFO: So I apparently managed to get the command F8 (system restore) to the l... Read more

A:URGENT PLEASE stuck on automatic recovery (laptop fell but seems to be alright)

You can't use F8 to boot into Safe Mode.  Windows 8 / 8.1 boots too fast to enter this command.  You can set the computer to boot into Safe Mode once Windows is open, or you can enable the F8 key to boot into Safe Mode once Windows starts loading.
 
Dropping a laptop with it running can damage the hdd.  I would suggest running running SeaTools for DOS.  You will need to download this to another working computer and then burn the ISO file to a CD to create a bootable disc.  This disc should be placed in the tray of your DVD/CD drive, turn the computer off, then restart the computer.  Once the disc is recognized you will receive a message suggesting you to press any key to continue.
 
You may need to enter the BIOS to set the DVD/CD drive as the first device in the boot order, and the hdd the second drive.
 
Please download SeaTool for DOS to your desktop.  This will make it easy to find the ISO file.
 
When the SeaTools for DOS website opens click on I Accept, then click on the Download button.
 
This download is a ISO image which you will need to burn to a CD or DVD in order to create a bootable disc which be used to run the diagnostic tests.
 
To burn this ISO file to a CD or DVD use the instructions below.
 
Notice:  This applies only to Windows 7 and Windows 8, earlier versions do not have this.
 
1.  Place a blank CD or DVD in the tray of your optical drive and close the tray.
 
2. &... Read more

Read other 1 answers
RELEVANCY SCORE 38.8

Usually with most computers (or previous ones at least...) if the key fell off (not the white part, just the key), I was able to just press it down and pop it back on. This one won't stay on. Help?

A:Key fell off!

Do you mean the key number from the keyboard?

Read other 3 answers
RELEVANCY SCORE 38.8

I opened a video file I downloaded, and I was redirected to a website, and like a total idiot, I downloaded this exe file and I am 99% sure I have a virus now.

I am trying to run SpyBot Search and Destroy, but I get this error message...

"Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."

I am the computer's administrator.
Not sure where I should go from here.
I did find several other threads on this topic, but they all seem to trail off and not offer any solutions to someone a reader that is just passing by.
Any help would be greatly appreciated, thank you!

A:I can't believe I fell for this...

Please run this application them immediately run the othersIf you use Spybot's Teatimer function, it needs to be disabledPlease download Rkill by Grinler and save it to your desktop.Link 2Link 3Link 4Double-click on the Rkill desktop icon to run the tool.If using Vista, right-click on it and Run As Administrator.A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.If not, delete the file, then download and use the one provided in Link 2.If it does not work, repeat the process and attempt to use one of the remaining links until the tool runs.If the tool does not run from any of the links provided, please let me know.Do not reboot the computer or you will have to run it again===============================Some types of malware will disable Malwarebytes Anti-Malware and other security tools. If MBAM will not install, try renaming it first.Right-click on the mbam-setup.exe file file and rename it to mysetup.exe.Double-click on mysetup.exe to start the installation.If that did not work, then try renaming and changing the file extension. click this link if you do not see the file extensionRight-click on the mbam-setup.exe file, rename it to mysetup and change the .exe extension to .scr, .com, .pif, or .bat.Then double-click on mysetup.scr (or whatever extension you renamed it) to begin installation.If after installation, MBAM will not run, open the Malwarebytes' Anti-Malware folder in Program Files.Right-click on mbam.ex... Read more

Read other 1 answers
RELEVANCY SCORE 38.4

Unfortunately, my elderly parents fell for a scam today.

Evidently mom was reading some news story online and they got some pop up saying they had a lot of infections and the hard drive was going to be destroyed shortly and to call this specific 800 number.

So what do they do? They call the number. And then they type in some stuff per their instructions which gave these people access to their machine. My mother then had the idea to call me and ask me if this number was legitimate or not.

I told them to hang up the phone with these people and to pull the plug on the computer immediately. It took some convincing but they did it.

I?m totally not sure what to do now. These people never asked for any money, but they had full access to their machine. My mother couldn't tell me what they had her type in to give them access but she did say something about the rundll32.exe. That's the most information I could get out of either of them.

I think I have to assume the worst in that the bad guys have access to anything and everything that was on the computer, passwords, etc. Luckily they don?t do any online banking or anything of that sort. But isn't the entire machine now a security risk?

I think I also have to assume that they installed some sort of backdoor to re-give them access to the machine once they turn it back on again. I've told them not to turn on the machine for now.

I also wonder if the bad guys could somehow get access to their internet gatewa... Read more

A:fell for scam

Read other 10 answers
RELEVANCY SCORE 38.4

I bought this notebook last April and I've been using it for at least 4 hours every single day. I did found a black screw on my table early this morning then I turned my notebook upside down to see one screw missing. This does not affect the laptops's performance however it alarmed me. Yeah, it might have been unscrewed due to the laptop's vibration but this made me worry that my laptop might not last that long. I had not experienced this on my 5 year old laptop and I don't think it is normal. Just posted this to see if people encountered this problem too.

A:G50-80 one screw fell out

Dear rojun,
 
Welcome in lenovo community,
 
I'm sorry for what happened to your laptop, but i can say that it is not a common issue with the laptop,
 
My advice to you right now, is to send your laptop kindly to lenovo service center at your country for full check up, to make sure that we will not face this kind of problems again.
 
Kindly find the link below for more details,
 
http://www.lenovo.com/contact/ph/en/
 
Regards,
Joseph

Read other 2 answers
RELEVANCY SCORE 38.4

 
I just got my computer - put my printer/scanner disk in and it disappeared.   So irritating.  Pretty basic function to have such an obvious flaw.  This computer is also noisy.   The fan runs and hums continuously.  HP all in one.
 
Now I have to take hours out of my day to find someone to get the disk out.  This is unacceptable.

A:CD fell into computer

@BoiseRE,I moved your inquiry, as you appended to a 3 yr old inquiry.Vertical CD/DVD slots do require that you snap the media into the holders.  No doing that allows the media to move within the tray, as you noted.  It is a human error.

Read other 1 answers
RELEVANCY SCORE 38.4

where does the main video card power supply cord plug into on an acer computer?

 

A:wire fell out

Probably different on every model. Is this an extra power supply connector beyond what the card gets through its slot?
 

Read other 2 answers
RELEVANCY SCORE 38.4

Hello, I have lenovo y50-70 model (20378) and my left 'Ctrl' button has fallen off and I am looking to fix the situation. I have found a replacement part at http://www.replacementlaptopkeys.com/lenovo-y50-70-laptop-keyboard-keys-replacement/ and I am wondering if this is the correct part to fix the problem and which type of keyboard I have. Keyboard type is either 'IC51' or 'IC06' and I am not completely sure which part to get. Am I approaching the solution correctly? PIC of affected area included. Thank you.

























IMAG0816.jpg ?660 KB

A:y50-70 keyboard key fell out, need fix

From comparing your picture and the picture on the website, I'd go with the IC51 if it were my purchase.

Read other 2 answers
RELEVANCY SCORE 38.4

So I got the ICE virus holding my PC hostage. I went to the BleepingComputer ICE removal guide and follow up on all the instructions but everytime I finished step 9. After pressing "1", instead of the PC starting up normally, all it did was opened up the "Startup Repair" screen. I went on and back tracked and redid it all over again but it still happened. Is this just simply a human error caused by me or is it something else in the process? Any help is much appreciated.

A:I fell victim to ICE

Please follow the instructions in This Prep Guide starting at Step 6.
Once the requested logs are created, then make a New Topic and post it to the =>> Malware Removal Experts Area <== Not back here.Copy and Paste any logs created, (do not attach them unless requested) and include a brief description of your problem and what you have done to try to resolve them.

Please note that the area can get a bit busy, so you may need to wait a day or more for a reply.NOTE - If you cannot produce any of the logs, then please create the new topic anyway. Do not run more tools unless the experts request them.

Read other 2 answers
RELEVANCY SCORE 38.4

hi, lemme give you some background info first. I mod and repair xboxs, and i was fixing one with vid problems and it came out good. I installd a mod chp and it came out good but the hdd woodnt boot. i switched to my hdd and it booted. I looked at the IDE interface and a pin from the top row was missing. now i have a old unusable hdd and someone told me to take a pin from that one. put some solder on it, let it dry place it in where it was and heat t he pin til the solder melts. otherwise just replace it. currently i can acces files on the drive by ftping from the modchip menu

for anyone that confused, a hdd lost a ide pin and wont boot, i can acces files by ftping to it. I can solder pretty good and have a useless hdd with pins i can use.

any ideas?
 

A:Help, IDE interface, pin fell out

Read other 7 answers
RELEVANCY SCORE 38.4

Hi there, thank you for taking the time to look at this! I'd appreciate any kind of help someone can give me.
 
My operating system: Windows 7 (64-bit)
 
Yesterday I fell for the SteamGuard.exe program which I downloaded from a Phishing site. I usually never fall for these things but I wasn't really thinking and stupidly went along with it and ran the program. There isn't all that much info that I could find about it online besides lots of other people asking for help too. I don't know exactly what it's put on my computer, or where. And I don't know how to go about finding and removing it.
I fear a keylogger may be part of it so I changed the majority of my passwords via mobile instantly. Steam, stupidly, requires you to use the desktop program to change passwords which would be pointless should there indeed be a keylogger on my system so I did the next best thing I could think of and deauthorised all other devices as well as locking my account out from transactions.
I have the majority of things I care about already backed up on an external HDD and I have good internet to re-download stuff so I can do a complete wipe as a last resort, but I'd rather try my options first.
Thanks again for your time

A:I fell for SteamGuard.exe, please help!

Reference:  http://www.bleepingcomputer.com/forums/t/545817/steamguardexe/#entry3459294 .
 
Now that you have properly posted a malware log topic, you should NOT make further changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc) unless advised by a MRT Team member, nor should you ask for help elsewhere. Doing so can result in system changes which may not show in the log you already posted. Further, any modifications you make on your own may cause confusion for the helper assisting you and could complicate the malware removal process which would extend the time it takes to clean your computer.
From this point on, the MRT Team should be the only members that you take advice from, until they have verified your log as clean.Please be patient. It may take a while to get a response because the MRT Team members are EXTREMELY busy working logs posted before yours. They are volunteers who will help you out as soon as possible. Once you have made your post and are waiting, please DO NOT make another reply until it has been responded to by a member of the MRT Team. Generally the staff checks the forum for postings that have 0 replies as this makes it easier for them to identify those who have not been helped. If you post another response there will be 1 reply. A team member, looking for a new log to work may assume another MRT Team member is already assisting you and not open the thread to respond.
It may take s... Read more

Read other 1 answers
RELEVANCY SCORE 38.4

I tried turning off AVG Watchdog, and now my AVG has completely fell over. I can't stop it running to use 'system restore', in the same instance it doesn't seem to be running, as it keeps telling me that it is turned off. I have tried uninstalling it, but it keeps telling me that it can't.  Any help would be appreciated.

A:AVG 2015 fell over

Hi [email protected] If you cannot uninstall AVG via the Control Panel, I suggest you to use their uninstall tool to clean the installation and it's remnants. Download the version matching your AVG installation.AVG 32-bit: http://download.avg.com/filedir/util/support/avg_remover_stf_x86_2015_5501.exeAVG 64-bit: http://download.avg.com/filedir/util/support/avg_remover_stf_x64_2015_5501.exeAnd follow the steps under "C) In case the uninstallation fails, please use the AVG Remover tool".https://support.avg.com/supportArticleView?urlname=How-to-uninstall-AVG&l=en_US

Read other 4 answers
RELEVANCY SCORE 38.4

Hello,

unfortunately the letter S got loose from the keyboard of my laptop. The plastic retainers came off with it and are still attached to the key pad. After some research on the internet and closer inspection i saw that the metal hooks for the plastic retainer seem twisted and therefore i was unable to reattach the key pad.
Any advice how to fix the problem? My fear is that i would have to exchange the whole keyboard?

Greetings,

Michael.

Read other answers
RELEVANCY SCORE 38.4

Two Win98 and one Win95 connected via 10/100 adapters through a D-Link DSS-5+ switch.

One WIN98 box 'fell off' the network. It can no longer see anything in Network Neighberhood, not even itself.

No problem dialing up and connecting to the internet.

It can ping the other computers as well as its own IP address.
The other computers can not ping it, althought the appropriate activity lights flicker on the switch.

I have removed everything from Network Neighborhood and reinstalled from the Windows98 CD.

Do these symptoms bring back any memories ?
 

A:Win98 box fell off the LAN

Reset the switch and try another port
 

Read other 3 answers
RELEVANCY SCORE 38.4

About 30 minutes ago, my computer had a pretty hard fall off a 3-4 foot drop, it was a pretty loud crash. Immediately I tried to turn it on again, and it did a "disk check". After that it just sort of got frozen. So i turned it off, turned it back on, and everything seemed to be running normal, for about 10 minutes. Then it just turned off. I turned it back on, and i had even less time that time around, as eventually it turned off again. And it was making some sort of Clicking sound while it was on...

I have a panel on the bottom of the back of my computer, and im 95% sure there is a unplugged cord there that wasn't there before, I am thinking something got displaced or fell off in the crash, but i am not sure.

I unplugged it, and opened up the panel, but i know nothing about computers...I am waiting for my brother to get home to take a look at it. But for now. Does anyone know anything i can do or any help they can offer on what is going on?

The computer turns on, then will just turn off a few minutes later, without any warning.

And it doesn't turn off until a little after that.

IF it is my Cooling system, which might be the case, how can i confirm this?

HeLP PLEASE!

EDIT: Nothing seems to be broken inside the Computer, but there are a few uplugged cords...
i turned it on with the panel open, and both fans seem to be working..

inside the computer, and on the like strip of plastic matirial that goes from the driver i guess, to all the computer ch... Read more

A:My computer fell, need help

If you know what the CPU heatsink and fan look like and where they are located, I would check to see if they didn't get knocked loose. The fan electrical connector could still be connected and the running fan might be hitting something. The unplugged cords could be just unused power supply connectors.

If you aren't very familiar with the insides of the PC, I don't know if it would be a good idea to muck around inside since you could do more harm than good. An accurate diagnosis of what is wrong with the PC is very difficult to give from this side of the internet without seeing the insides ourselves.
 

Read other 3 answers
RELEVANCY SCORE 38.4

6 of the screw on my laptop have fallen out, the base of my laptop is only just holding on. No one I talk to seems to be able to help, I just get sent to a new person.

A:Screws fell out. G50-70

Have you removed them? Did you find them and tried to fix?

Read other 5 answers
RELEVANCY SCORE 38.4

I have a Pavilion 20" All-in-One computer. (Model: 20-b314) I put a cd in the drive and it closed as normal. When I went to play it the computer said "no disk". I opened the drive and it was gone....how do I get my cd back?

A:CD fell into computer

Hi JOVIL, sorry to hear that you are having issue with retrieving a  C.D. from the drive. I have looked into the issue for you. Is it computer still under warranty? If so, I would suggest that you contact HP Total Care at 1-800-474-6836 for warranty options.  If this number is outside your calling area, here is a link to the world wide sited so you can get support in your area.  http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

 

Sorry for the inconvenience on this matter.

 

Thank you.

Read other 4 answers
RELEVANCY SCORE 38.4

So just like 15 minutes ago, my PC fell down. When I say fell, I mean the system unit struck the floor at a height of like meter (guesstimating the height of the table). It fell down because I was relocating my desk, the system unit is placed on another table (If you're asking why, I'm on a flood prone area so I can't place my unit on the floor; the table was the only thing to put it on to.) while the other things are on the desk. So I moved the desk closer to the unit then rotated it at 90? clockwise and pulled the desk to the right. I was struggling to pull the desk because one of the wheels is jammed. So I was looking at that jammed wheel when I was pulling it and then I heard like a bang. Checking the other side, I saw the unit is on the floor. I knew that my PC was fine because I was playing a song and it was still playing after it fell. The first thing that came in my mind is "Is the HDD fine?" and my answer is yes; and according to the spec sheets, my drive can survive a 30G~65G fall when it's working and I checked it with HD Tune with no problems. Plus the position of the HDD is upright so it's parallel to the direction of the fall (Does this help? Just for future reference).

Now the question is there any part that may be damaged? For now, all is fine.

When my PC fell down, I was actually surprised that everything survived considering that most of the parts are like 3.5 years old (GPU is almost 2 while HDD is 10 months). It gave me a mini-heart attack whe... Read more

A:PC fell down + one PSU question

Personally I'd recommend opening the unit up and check that everything looks fine (no visible damage), all connections are properly seated and all cables and connections are firmly made.

Read other 9 answers
RELEVANCY SCORE 38.4

So I put my laptop in cinema mode (keyboard down) and when I put it on the table and slid it, the shift key popped off. I can't seem to get the bugger back on, it doesn't look broken. Any recommendations?

Read other answers
RELEVANCY SCORE 38.4

Hello, Tonight the L key from my Ideapad Z580 fell off. I have tried to fix it but noticed one of the parts is broken so when on it half hangs off. It is incredibly annoying as I am a student and needing a fully functioning keyboard for upcoming work.  What am I supposed to do about this? Or where am I supposed to get a replacement? This is not the first time I've had this problem with this laptop after having it for jsut over a year.  Thanks. 

A:Z580 Key fell off

Hi Nyxx,                           
                                              
Welcome to Lenovo Community!        
                                                                                                                                            
As per the query we understood that you are facing the issue with key out of the keyboard of your Z580 laptop.
 
As you have mentioned... Read more

Read other 5 answers
RELEVANCY SCORE 38.4

Hi     Has anyone else had CDs falling into their computer when uploading music or other things.This happened to me last month HP took the computer any took out the two CDs and sent it and the CDs back but it has happened yet again. I have spent hours trying to get on the chat line then a long time chatting with them previously but they dont seem to undersatand simple things like the CD is still inside the computer.It this a design fault?

A:Re: CD fell into computer

@Graeme64,It is not a design flaw.  The media is supposed to be "clicked/snapped" into the holding tabs, because of the vertical design. Now, it becomes operator intense. How else would a vertical disk stay in-place. You could try to shake it out. https://www.youtube.com/watch?v=AFEFhFY3tLs 

Read other 1 answers
RELEVANCY SCORE 38.4

I have a Dell Inspiron 1100 laptop and recently my F9 key fell off. I know I don't use the key often but it just looks odd not having it there. any suggestions? thanks
 

A:keyboard key fell off

Perhaps laptop keyboard are different, but why can't you just stick it or glue it back on? I agree not much use for the F9 key, perhaps some games.
 

Read other 2 answers
RELEVANCY SCORE 38

I recklessly downloaded and opened the attachment, not realizing that something was wrong before it was too late and I had already double-clicked the file. It shut down my computer and I began to metaphorically bang my head against the wall. So far the infected laptop seems to be working normally, but now I'm paranoid and would like to make sure that it's completely clean before going back to regular usage. I ran several scans with Malwarebytes' Anti-Malware and avast! Home Edition version 4.8. Avast! didn't catch anything, but MBAM caught and fixed quite a few things. However, I'm still worried. Here is my latest HijackThis log, as well as one from SDFix (which I installed and ran while in Safe Mode--if this was wrong, please tell me. Also: sorry).

Thanks so much for your help--I'm at a loss for what I should do next.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:53:57 AM, on 3/3/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\WiFi\bin\S24EvMon.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WIND... Read more

A:Fell for a fake UPS e-mail

Here's the first part of the SDFix log (it's too long to post all at once):

SDFix: Version 1.240
Run by Angela Tan on Wed 03/03/2010 at 10:37 AM

Microsoft Windows XP [Version 5.1.2600]
Running From: C:\SDFix

Checking Services :
Restoring Default Security Values
Restoring Default Hosts File

Rebooting
Checking Files :

No Trojan Files Found


Removing Temp Files

ADS Check :

Final Check :

catchme 0.3.1361.2 W2K/XP/Vista - rootkit/stealth malware detector by Gmer, http://www.gmer.net
Rootkit scan 2010-03-03 10:47:00
Windows 5.1.2600 Service Pack 3 NTFS

scanning hidden processes ...

scanning hidden services & system hive ...

scanning hidden registry entries ...

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib]
"Last Counter"=dword:00001d88
"Last Help"=dword:00001d89

scanning hidden files ...

scan completed successfully
hidden processes: 0
hidden services: 0
hidden files: 0
Remaining Services :


Authorized Application Key Export:

[HKEY_LOCAL_MACHINE\system\currentcontrolset\services\sharedaccess\parameters\firewallpolicy\standardprofile\authorizedapplications\list]
"%windir%\\Network Diagnostic\\xpnetdiag.exe"="%windir%\\Network Diagnostic\\xpnetdiag.exe:*:Enabledxpsp3res.dll,-20000"
"%windir%\\system32\\sessmgr.exe"="%windir%\\system32\\sessmgr.exe:*:enabledxpsp2res.dll,-22019"
"C:\\Program Files\\Common Files\\AOL\\Loader\\aolload.exe"="C... Read more

Read other 3 answers