Over 1 million tech questions and answers.

File Access Errors despite being User Admin

Q: File Access Errors despite being User Admin

I'm trying to register a couple music products but can't because of file access errors. I've never had this problem until a couple weeks ago. It seems that during the authentication process, it accepts the key but cannot write the actual authentication file to the disk.

When I right click the authentication software and go to properties, it says I have full control except 'special permissions' which I don't think I had even before it WAS working. I also have the 'run as administrator' option checked. I am logged in under the only admin account so I have no idea what's causing the problem at this point. There's no programs running and using the same software at the same time. I even downloaded a program called UnLock IT which is supposed to unlock any kind of restrictions set on the file but the program says its completely 100% accessible and has no restrictions either.

I'm kind of at a standstill with this whole thing but want to use the software for my projects. Googling the software with the problem gets me nowhere either.

The two programs in question are 'Plug and Mix VIP bundle' (which I've redownloaded from their official site twice), and Positive Grid Bias Bundle (This was authenticated and working and then stopped and went into demo mode).

Help me out guys

RELEVANCY SCORE 200
Preferred Solution: File Access Errors despite being User Admin

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: File Access Errors despite being User Admin

Just wanted to add that I just tried booting into safe mode but encountered the same error.

Read other 1 answers
RELEVANCY SCORE 69.2

Hello All,
I'm delighted to have found you and after a long day of trying to help myself i am now requiring your much appreciated assistance please! I'm not a techy person at all and am hoping someone can help
Last week my husband purchased a new hp laptop which came with Windows 10
On setup i used my microsoft account to login with a pin, the account was setup as administrator (thinking i could change things later)
About 2 days later i added a standard user account for my husband with a microsoft account login with pin.
I wanted to make his the administrator account but thought i had better change mine to a standard account first! My mistake!!
Now i cannot change anything! i have tried to use the cmd prompt to run as administrator - it asks for administrator permission and does not allow me to enter a password or yes!
I have tried all suggestions to enable the hidden windows 10 account but all ask for the same permission.
I have tried to go to setup, recovery, troubleshoot, advanced option, system restore - it requests an administrator password and when i entered what i thought is mine it does not work! Feeling a little
Does anybody know anyway i can go back in time to start again or how do i access administrator rights as i really need to add programs etc
Thank you for any help given

Read other answers
RELEVANCY SCORE 60.8

I cannot find the solution to this anywhere for months now. I've had to do a clean reinstall of my win xp HE. My old user account has dissapeared from user accounts. its still in win explorer is "documents and settings" but every time i try to access it, it says access is denied. Also tried doing so in dos, and with other various programs. I've managed to get the files from within the folder using "getdataback for ntfs".
Would appreciate it if you could help me.
 

Read other answers
RELEVANCY SCORE 60.8

I'm running Windows 7 Ultimate - and I've noticed that from a secondary standard account, users can access the admin's files (my files) from simply going into C:/users/xxx... or by accessing them from windows search.

I want to prevent this from happening - I've tried preventing access to my user folder, but it is still accessible from another account. Scouring Google hasn't brought me results either Can anyone help resolve this problem?

A:Standard User Can Access Admin's Files

have you given admin rights to the User account in qestion?

Read other 5 answers
RELEVANCY SCORE 60.8

After reloading Win 7 from the recovery partition I can't get access to Docs and settings , sys volume information and many more. I get messages saying; C: Documents and Settings is unavailable Access Denied, or You dont currently have permission to access this folder. Since I am the only user and the admin, could someone please tell me how to take full control of my system?
Thanks,
Bill
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 446839 MB, Free - 404024 MB; D: Total - 29795 MB, Free - 4374 MB; G: Total - 30517 MB, Free - 28042 MB;
Motherboard: Hewlett-Packard, 144C
Antivirus: avast! Antivirus, Updated and Enabled

HP Pavilion dv6-3225dx
 

A:Solved: Admin and only user no access to many folders

There you go Bill :- http://www.howtogeek.com/howto/wind...ership-to-explorer-right-click-menu-in-vista/
 

Read other 3 answers
RELEVANCY SCORE 60.8

Many complaints about Msft's jumbled handling of user accounts,  but none of the fixes I found work.
Files in a folder on an external hard drive give an access denied error - you must be an admin to access. Only one account on the pc and it's an admin enabled account. Other files in this directory on the hard drive open fine, and the folder has never had
different permissions applied so it's ridiculous that I can't access these files.
One thing to note is I do get a "Windows needs to be activated" alert when I look at the admin account dialog. The only option given there is to sign into a Msft account which I don't want to do nor should I have to. Windows is clearly activated
and working fine and the need to link to a Msft account is just Msft marketing bullcr*p. 
I only use this pc for music so if this can't be fixed easily I'll just install Linux and be done with Windows. I've already wasted far too much time going down Msft's rabbit holes. 

Read other answers
RELEVANCY SCORE 60.8

Prior to last week my computer was running Windows 7, the computer also has a 3TB MyBook external drive on which I ripped over 100 movies from DVD/Blue-Rays that I own (and still have). The reason for doing that was 1) so I could watch the movies on my TV without the hassle of inserting the dvd into the blue-ray player, and (2) reduce the amount of storage space (I threw away the original containers and put them in a simple DVD file).

Last week I installed a new internal hard drive and did a clean install of Windows 8. Consequently my admin account's user name was changed to be the same as my Microsoft live.com account name. Now I can't access any of the folders on MyBook without taking ownership of them one-at-a-time. That is going to be very very time consuming to do that for over 100 folders. Does anyone know of any faster way to accomplish this?

I don't know why Microsoft won't allow computer Administrator to access any folder on his computer. This is just dumb.

Thanks

[edit]
The situation gets even worse -- after taking ownership of the folders I still can't access any of the files or sub-folders. I have to do that for every folder and file, somewhere around 500 of them! I feel like just reformatting the drive and starting all over again.

A:How to let Admin access folders created by another user

You need to take the ownership AND change permissions. Respectively, it's accomplished with two commands in the elevated command prompt:

Code:
takeown /f D: /r /d y
icacls D: /grant:r UserName:F /t


In this example:
D - the letter of the drive you need to get access toUsername - your username

The commands take care of all drive folders recursively.

   Warning
Never apply these commands to the system drive.

Read other 1 answers
RELEVANCY SCORE 60.8

Unable to change User Account Control settings in Windows 7

I am unable to access my User Account Setting in Windows 7 when I click on it nothing comes up , even though I'm logged in as an administrator. When I click on "Change User Account Control Settings", absolutely nothing happens.

I am not able to access cmd as a admin.I have only one account and that is my admin account.When I click on admin cmd it open but when I right click and try to access it as a administrator nothing comes up.

I am also not able to install any new software on to my computer it show a Pop-up window user account control do you really want to allow this file to make changed on your computer I say yes and nothing happens

Can anyone please help me with this Thanks!

A:I am not able to access User Account Control on win 7 Pro using admin.

Sounds like you have lost administrator rights.
Are you sure your password is correct?

Check and see if you can go to a restore point before this happened.
It might not let you do this either.

Read other 2 answers
RELEVANCY SCORE 60.8

Hello!

I have this problem since Windows 7, i don't remember this happens on Windows XP.

I have 2 computers with Windows 8.1 installed: desktop and laptop. I am trying to access local disk drives of "desktop" from "laptop".

For example, i type in Windows Explorer "\\desktop\c$". "Windows Security" window pops up where i am typing credentials. If i specify "desktop\administrator" user and then provide correct password everything is fine, i can access disk C. But, if i type "desktop\john" and provide correct password i am getting error "Access denied". "john" is my main account, it's in "Administrators" group of "DESKTOP" computer.

If i try to access the same resource over "cmd net use" i receive error "System error 5 has occurred. Access is denied."

Why "john" can't access "DESKTOP"'s disk C over LAN?

A:Can't access disk drives over LAN, user is admin

The users in Administrative Group aren't the real administrators. See the tutorial:
Built-in Administrator Account - Enable or Disable in Windows 8

In Vista and later the user the system sets up as a member of Administrator's Group is roughly equivalent to the old Operator's Group in NT 4. It can register/unregister ActiveX, install and remove software, but it cannot delete system files etc..

Read other 13 answers
RELEVANCY SCORE 60.8

Hi everyone,
recently I took the trouble to convert my XP account from admin to restricted user to avoid rootkit problems etc.

It created a hell of a lot of problems of which most I could solve by myself but some not, e.g. this one:

as a backup measure I used to copy my active data by xcopy to another physical HDD . - it worked like a charm.

now the same batch says: no access rights (to the folders on my backup drive)
but I haven't changed the username (just the rights the user has) so the files should still be accessible by me or what?

how do I get access to them short of converting the drive to fat32?

thanx

-sam
 

A:Changed from Admin to limited user - no access

If this is just a local PC that is not on a network you are going way overboard. Changing the admin account to a restricted user does just that, restricts access to most areas on the compute, including certain file system access. You would be better served by changing the admin account name and giving it a strong password .
 

Read other 3 answers
RELEVANCY SCORE 60.8

Hi i would like to know is it possible Run a particular program without UAC, I am in a situation where a program for datacard always prompts for UAC to allow connection to internet, It works when i log into admin account. But the program always asks for UAC when run from User account,

I tried creating a schedule task for starting the program from Admin account and created a shortcut for the program.

But when i run the shortcut from user account(standard) it says access denied,

System is Windows 8.1

any help on how to disable UAC for standard user for particular program will help a lot,

Thanks,

A:Admin access from standard user for particular program

You could probably check the properties of the datacard and select it to "always run in admin mode", like you can for software.

Read other 4 answers
RELEVANCY SCORE 60.8

Hello, I have a desktop running on Windows XP.

It's a long story... The fact is that somebody has put a password on my Windows User account. I thought I can still access Windows through the Admin account, but the Admin is also passworded. So I'm staring at the monitor not knowing what to do.

Is there any way I can access my desktop?... I don't want to reinstall Windows, because there's stuff on my PC that I don't want to lose.

Thank you.

A:I cannot access desktop because of admin and user password.

u can download the hirens boot cd and boot into mini xp. inside of mini xp there is many tools for repairing windows and such included in those tools is a password recovery tool. ive never used this tool ive used the hirens boot cd for repairing stuff in windows before but ive never used the password recovery options. u can try this or maby someone els knows somtihng better.

Read other 2 answers
RELEVANCY SCORE 60.8

Hi, hopefully someone will be able to point me in the right direction?

This my father's PC (my brothers hand me down).

He previously didn't need to login as a user at all, it would go straight to his desktop (wasn't even aware of any username etc).
I set up as an administrator so that I could change a file name, this worked just fine until we wanted to get to his desktop etc. It then asked for a username & password, whatever I try it doesn't want to work.

There is only one other user account listed as well as the administrator, I've tried logging in with this username with and without passwords set up from within administrator account to no avail.
All his files, desktop etc are there when I explore the hard drive as admin.

Any help would be appreciated?

A:unable to login user, I do have admin access

I don't know if this has a bearing? The account doesn't appear in user profiles? Please see attached.

Read other 9 answers
RELEVANCY SCORE 60.8

Hi all,

I'm not really sure when this problem started, but as the admin account and only real user (I set up another account to test my problems) on my HP Laptop, I cannot access the user accounts on my computer. I've tried to access them multiple ways, including through the control panel and directly through the start menu, but when I try to click on anything having to do with the user accounts on my pc, nothing happens. So I am unable to change my password, change my picture, or add or remove other accounts. It's almost like I'm not an administrator. However, according to multiple places on my computer, my account is still an administrator. Also, some programs do not launch unless I chose to launch them as an admin by right clicking, is that normal?

So to summarize my situation, I don't think my admin account is giving me proper access to my computer, limiting the things I can do.

Does anyone have an idea of what has happened or how I can fix it?

Thanks,

- Sean

A:Unable to access user accounts as admin

Try this:

Open an Elevated Command Prompt
Enable the hidden Administrator account: Enter net user administrator /active:yes

Reboot and got to safe mode (press F8 during boot).
Login as Administrator (no password).

Open Control Panel, User Accounts.
Check you account and make sure it's still setup correctly.

Read other 6 answers
RELEVANCY SCORE 60.4

My friend recently bought a new Windows 8 laptop which she set up in her name and therefore has a passworded Admin account. I also partitioned the HD so that the smaller portion (C) contains the OS and the larger portion (D) is for all her files.

Since I am only using the laptop temporarily my passworded 'standard' user account is located in (C) and cannot be viewed by anybody else, however, I can view my friend's files which are now being stored in 'D'.

Is there a way to protect the files in the 'D' partition in the same manner as if all accounts were on one drive and password protected?

Tom.
 

A:Windows 8 admin/standard user access issues

It's in the NTFS permissions - - ever look / change those?
 

Read other 2 answers
RELEVANCY SCORE 60.4

Hi ya'all,
I've been going in circles trying to regain administration privileges I did not know I lost. When I go to the Users, the only thing visible is guest, so I cannot change settings. At some point, I added a home group to share with family, b t that's all. I've
been trying this over time, but after hours I have to quit. I backed my computer up to an external drive, hoping to just wipe computer and start over, but I don't have administrative privileges. I AM THE FREAKING ADMIN!

So, since my computer came pre-loaded with 8.1 in my Dell XPS 8700, I thought the simplest thing was to obtain a Recovery CD (I should've added to my purchase initially) and start fresh, but that doesn't seem to be as easy as it used to be. I do not even
have ability to go into the cmd. I'm not a techie and need help. Dell keeps offering me the back up using a USB, but I don't have one, which is why I backed everything up to an external drive.
Your help and advice is very much needed. THX!

Read other answers
RELEVANCY SCORE 60.4

Hi,

I am new user to the Windows Vista Home premium. My laptop is being shared with some family children. I given them the Standard User Account and applied various security policies regarding their computer usage.

But I need help regarding the following:-
1. How can I restrict a Standard User from using Removable Media like CD, DVD, USB.
2. How can I disable "Delete Browsing History" or "Internet Options" for the internet explorer for a standard user.

Kindly help me in this regard ASAP. I have searched on net but nothing fruitful can be done even on changing Registry.

Regards,
Raj Kumar Arora

A:Some Solutions for an Admin to control user access permissions

All of these apply to all users.
The Only way to do it is to disable the optical drive/usb under device manager, and disable internet options/menu options (User Configuration\Administrative Templates\Windows Components\Internet Explorer\Browser menus) .

This has to be done through the admin account/ and will affect ALL accounts. This would be a tedious task to perform every time the admin/standard user wanted to log on/off. You would be better off dual booting two Operating Systems- and letting the kids use the newly added restricted one.

Read other 4 answers
RELEVANCY SCORE 60.4

I have a Windows 2003 Exchange Server with Windows XP Professional Users on my Workgroup. I removed it from a domain, and added a workgroup. The easiest thing to do, would be start from scratch, but I am not afforded that luxury Everything is fine in the Intranet and Internet connectivity...

My problem is this:

I need one user to be able to access EVERYones pc's, including the desktop, and My Documents folders at anytime... and restrict Users from doing the same... I have the one Administrator account set up on the main pc, with a few other end Users on other pc's, but still can't remotely "see" the desktop, only the standard "Shared Docs" folder and the shared folders I set up, on another pc...

How can I give one user access to everything? Is Remote Desktop the best answer? There must be some simple policy I am missing here...

HEEEEEELP!
 

A:How do I access a user's desktop, documents, etc as a Workgroup Admin?

You could try RealVNC....
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hi all,I hope someone might have an idea on how to proceed here. Im working in a company where the IT department is run by the 3 Stooges and hence the overall "service" is more like a free theater show when interested in wasting time.Having said that, I have my work laptop at home with full Admin Access and my own user profile. The laptop is a HP 640 G2 which was set up via fingerscan for me to log on (into the user profile). Since this laptop (which i also dislike alot for various reasons) stopped accepting the fingerscan (and subsequently fingerscan turned out to be fully broken hardware wise) Im not able to log into my User Profile. The password that has been set up for it was done once as out of requirement when we got them but never used and hence forgotten.The IT department has no clue or idea how to fix this remotely but I have the full access of the computer with admin rights, im able to go manually into my user profile folder and so on, so my question is, how can I reset the password? In theory, I should be able by going into Control Panel and User Accounts but my user profile is not on the same domain as the admin access and the userprofile is not listed within the user accounts.Admin is based on the computer domain name (like lpw1234-/admin) and my user profile is on the "office" domain, which by default required just my username with no previous domain name (like office/user).Could someone tell me how I can reset the user password for that profile?Thanks alot... Read more

A:Windows 7 Pro 64-bit - USER PASSWORD Reset - with Admin Access

Sounds to me like the entire situation is the responsibilty of the entity IT dept.  It possesses the means, at the very least, of just providing you with a system...or changing profile passwords for you.  Since this is the property of a business entity...with an IT department...it's up to them to resolve it.
 
My two cents...
 
Louis

Read other 1 answers
RELEVANCY SCORE 60.4

I am only user on this computer and heard about the hidden Admin account for Windows 8. I logged into it, but all stuff from normal account such as documents and program shortcuts were missing. Is there any way I can transfer the Admin full access rights to my primary user account? Please help and thanks

A:Hidden Admin Account Access Transfer to User...

Hello Skeet, and welcome to Eight Forums.

Just to note, that while signed in to the built-in elevated "Administrator" account, Store apps will not work.

Your other files are not missing, but just in the other account's "C:\Users\(user-name)" folder instead. Since the built-in Administrator is a separate account, it will have it's own "C:\Uses\Administrator" folder and settings.

If you like you could just include the other account's folders into the Administrator's libraries.
Library - Add a Folder to in Windows 8

Hope this helps,
Shawn

Read other 1 answers
RELEVANCY SCORE 60.4

I'm going to let a technician have my Windows 7 64bit PC in order to do clone the HDD to a SSD and then replace the HDD with the SSD. I think the techn wants an admin level account. I am concerned that (s)he not gain access to confidential files etc that would be available to me were I logged in. Is there a way to let the tech have admin access (s)he wants w/o having to be concerned about the privacy of the info on it? Can you create an admin level account which deprives its user from gaining access to files on a certain directory under c:\users

A:granting another user access to an account with 'admin' privileges

Acerman why don't you clone the drive yourself it is really not that hard with Macrium Macrium Reflect FREE Edition - Information and download

See my pic it shows the process but remember the drive you clone to has to be as large or larger than the drive you are cloning from.

There is a way of dragging and dropping the partitions into a smaller drive but it is not reliable enough for me.

The alternative is to image your drive slip a new one in - install the system using this
Clean Reinstall - Factory OEM Windows 7 and then use the image to get back your data. As you seem to be concerned that you have data that you do not want to be copied or whatever. That is so easy if you know how and I can and I am not a techie so the shop bloke would be more than capable of doing that.

Read other 3 answers
RELEVANCY SCORE 60.4

I have created two new user accounts. The first I set up as a standard account, logged on, did a few things, then logged off, logged on as my administrator account and editted the account to be an administrator. When I log back on as this account, it appears that the user still does not have administrator privileges even though under the user it says "Administrator". For example, the UAC control does not appear when you click on "Change User Account Control Settings". Also, trying to install software where the installer asks for admin privileges fails. However, the second account created started as an adminstrator account and exhibits neither of these problems.

I just haven't seen anything in posts about this and wonder what the difference is and if there is anything that "second class" administrator user can do to become a "first class" administrator.

A:New admin user acting differently than standard user changed to admin

Quote:
For example, the UAC control does not appear when you click on "Change User Account Control Settings". Also, trying to install software where the installer asks for admin privileges fails.


Does UAC control display a confirmation question? this is the case for administrator accounts
Does UAC control ask for username/password? This is the case for standard accounts
Change the account back (just for testing) to standard account. Does it ask for username/password when changing system settings?
system built-in admin account has admin rights always
manually made account with admin rights has only admin rights after you allow it in the UAC control popup.
manually made account without admin rights has only admin rights after you allow it in the UAC control popup (enter a admin's username and password).
That's how it should work

Read other 5 answers
RELEVANCY SCORE 60.4

Thank you!

I am admin ( WIN 7 Pro 64 computer 4 years old): In admin user default account, any and ALL open, and .exe functions denied.

CMD right click 'run as admin' (net user admin etc.) has no effect. Checking all folders I show FULL permission. Right click 'run as admin' has no effect on any file.

Created new USER with ADMIN functions and all works in that account.

Q: How can I trouble shoot my normal ADMIN account (it has all of my 1000s of folders, programs etc.)
Q: Or how can I transfer all of my doc to my new user internally? (Without backup to external drive etc)

This happened after a Microsoft standard update weeks ago. I tried restore, but restore fails. By now I have done much on the computer and restore not an option.
I have not been able to open or run any program files.

Any help I would be grateful!

TF

A:Admin User Error5. CMD solutions failed. New User with ADMIN works

Wow. 2 days and not a single suggestion or reply?

Is this a really a simple common error? Is that why no replies? Or is there no help for it?

I searched the forums for hours over 2 days reading multiple posts and possible solutions and came up empty. Nothing applicable to my situation.

I have tried:
1. System restore. It always fails, even in SAFE mode or REPAIR mode.
2. Run as administrator (Both from right click and from CMD)
3. Sharing all folders (Although this ADMIN account has all privileges/permissions as it is anyway)
This created a 2nd ADMIN account. Don't know why.
4. Reset all privileges back to default settings.

Have not tried to re-install windows as I don't have a copy of Win 7. Plus I would like to avoid the reality of reinstalling so many programs and files.

Right now when the Original Admin user tries to run a .exe, I get a "Setup was unable to create the directory "...etc..." Error 5 access denied.

Any suggestions would be appreciated. It would at least get me moving trying some things. Thank you.

Read other 7 answers
RELEVANCY SCORE 60

I am having a problem with openoffice running on windows xp home. We have an admin user and a number of limited users. Previously a file has been created and edited by an admin user, then saved to a none protected directory. When the file is opened by a limited user, they are only granted read-only access. Openoffice support seem to think the problem is with windows xp locking file permissions for any files edited by an admin to admin only, is this likely to be true? If so, how could I go about giving limited users full access to those files?

thanks.
 

A:admin/limited user file permissons

bump
 

Read other 1 answers
RELEVANCY SCORE 59.6

When i try to launch some applications and aloso the command prompt, im being denied access. Noone could have changed anything im positive and im the only one who uses this computer ever. Would a reinstall fix the problem? and also as a side question can i reinstall windows and save all the data that on the computer? does a reinstall of windows without formatting just overwrite the system? or if i reinstall will i have to reinstall everything because ive been having other misc problems and id like the reinstall if i dont have to backup or copy all my info. Thanks in advance for any info!
 

A:Not able to access cmd prompt (admin restrict, yet im the sole user of this comp)

Read other 14 answers
RELEVANCY SCORE 59.6

1. So when I try to that, it goes FILE BY FILE but some cause a window to show up which reads: access denied!!
And I am admin, makes no sense!

2. When I am on a limited user and I try to access an admin folder or directory, or run application as admin I am asked to enter the admin's password. for folders I just click on the folder and it opens a window that asks for the admin's password, for apps I click run as admin. The problem is that after I enter the password and proceed, It hangs, explorer hangs i guess.

A:TWO problems; allowing a limited user access to an admin folder

If you are trying to editing a file that is located in the programs folder, than you need to save the file to the desktop and drag it over into the folder and it will override that file making it the correct folder.

Take a look at your security settings: ..Windows 7 | Security Features.. and see what they are set at. Also, download an different Internet Browser and see what happens.

Read other 2 answers
RELEVANCY SCORE 58.8

A couple months ago my friend fell for a Microsoft call scam.  She let them in remotely.  I have been trying to help her get rid of whatever malware or ransomware there is.  When I boot normal it gives an error that the Desktop is unavailable and locked.  When I boot to safe mode it says it could not log into the user accounts profile. I added the admin login but I still can not change anything in user accounts.  I have tried the Kaspersky Rescue Disk 10, Malwarebytes, Super antispyware, and CCleaner, nothing has changed.  I can still recover her personal items in an old data folder the scammers saved, but I would really like to recover the computer.  Any help would be appreciated.

A:Safe mode doesn't allow access to admin and user profiles after scam.

Hello, can you repost here for a deeper look. Start at step 6.Please follow this Preparation Guide and post in a new topic.Let me know if all went well.

Read other 1 answers
RELEVANCY SCORE 58.8

Hi, I need help:

1. I log into a normal user account.

2. I double click to access a restricted folder.
(Restricted folder means: In administrator account, I made this folder restricted to other users. Right
Click/Properties/Security tab)

3. A message came up:
You don't currently have permission to
access this folder.
Click Continue to permanently get access
to this folder.

4. After I click Continue a message came up:
You have been denied permission to access this folder. To gain access to this folder you will need to use
the Security tab.
But I want Windows to ask my admin password to access that folder.


I have done this job before, and it worked fine but I forgot how did I do...
Thanks for helping me.

Related topics: UAC, netplwiz, secpol, gpedit, runas

Read other answers
RELEVANCY SCORE 58.8

Hi,

Can we give the local area connection icon(which will be at the right end of the task bar) complete access to the local user which is not having admin privileges as we give some time and date permissions if required to the local user which is not having admin privileges like that.

Awaiting for the reply.
 

A:local area connection icon access - non admin user in windows

help me on this please
 

Read other 1 answers
RELEVANCY SCORE 58.8

I have two users on my laptop but only one with admin rights.  It now won't logon (user profile service service failed)Tried to boot in safe mode - won't work (missing files?)Tried HP recovery manager - won't work as it needs the admin account to access itNo windows disks as its a HP productCan't download windows to reinstall as it's a HP productLaptop was bought in US 7 years ago so no chance of supplier support (Live in UK).  I realise I need a new one but I'd still like to access the photos etc.  I will have backed up most of them.  Is there anything I can do? Am I forced to buy discs from HP? and will that even work? I'd be very grateful if anyone can see a way to resolve this.  

Read other answers
RELEVANCY SCORE 57.2

I cannot seem to access user accounts through control panel. I keep getting script errors. Also, I keep gettong just a blue screen when I open IE. Stating "runonce". Any ideas?
 

Read other answers
RELEVANCY SCORE 56.8

Hello!

I secured a database in MS Access 2000, however after having users join the MS Workgroup, some of the users cannot open the database due to the appearing error message: Could not use 'Admin'. File already in use. When you click the help button on the error dialogue box, the succeeding window references the message "Could not use <name>; file already in use. (Error 3045)"

Does anyone know how to clear this? At the time, there were absolutely no other users accessing this shared database.

Thank you!
Alex
 

A:Admin file in use MS Access 2000

Read other 7 answers
RELEVANCY SCORE 56.4

Hello,
I am currently running W7 Ultimate 64 Bit with Norton 2011 and Comodo 5.????. I noticed I didn't have a site advisor on FF. So I installed McAfee. It seems to react after a file is downloaded and everything even Windows Gadgets are unsafe and must be blocked. I downloaded Norton Safe Web Lite to replace it. It downloaded in priviledged account (standard). It won't let me run or delete it saying I don't have permission or privilege to do so. If anyone has any ideas I'd appreciate it. Thanks in advance for any assistance.
glennc

A:Can't Access file for deletion with Admin Privileges

Decide on which antivirus program you want to use... You look like you have 3 installed.. That is 2 too many ... I would also uninstall Norton Safe Web Lite... If you are still having problems uninstalling a file, boot into safe mode and delete the file...

Read other 9 answers
RELEVANCY SCORE 56.4

Hi,
I have been looking for this answer for 2 days and can not find anyone who has had similair problem.

THere are 2 accounts Administrator and Kenmystro/administrator. I have the password for both and can access both. win 7 Ultimate Hp8510.
I have already selected all user permissions and taken ownership in every box I could find for Kenmystro/admin. the UAC is at minimum and the security centre is off. Run as admin on right click does not help.
It does not matter which of the 2 accounts I log into when I try install certain HP software(Maintenance
& some drivers) it says I do not have admin privileges.

This is driving me nuts can anyone help??
 

A:admin account and user admin still no admin privilages

Read other 6 answers
RELEVANCY SCORE 55.6

It's a long story, but is there a way on Windows 7 to lock system files and/or system drivers WITHOUT having to remove administrative privileges from user accounts? I'm needing to lock access to specific system files and drivers while still maintaining the Admin status of a different user account.
Thanks for any help with this...
 

Read other answers
RELEVANCY SCORE 54.8

I recently suffered a hrd disk failure and I was forced to extract the data from the faulty disk using a Linux distro (which managed to access all the files just fine while windows complained the partitions were unformatted). I then incorporated the files into my new Windows 7 installation and soon found out I could not access the files because I didn't have the necessary permissions. Since changing permissions for 1000+ files one by one is rather tedious I browsed this forum for an alternate solution and found out I could change file permissions for a folder 1 or more levels higher, including all files and folders inside said top level folder.

While applying new permissions to my <username> folder I was prompted to confirm if I wanted the Appdata folder to be changed as well. I really didn't know, but decided against. Even so, since I made the change I am having problems installing programs (can only do so as admin) and several programs have started informing of problems like:

Failed to create temporary folder:
C:\Users\<username>\Appdata\Local\Temp\<foldername>

My questions therefore are as follows:

- what permissions do I need to set for the individual folders from <username> down? Are they all supposeed o be owned by the user?
- what can I do to correct the current behaviour of my installation and to regain control over installing programs as a user?
- ... or is something different causing the problems I am experiencing?

I am using Windows 7 U... Read more

A:File permissions for individual user folders, program install errors

In command prompt

Code:
cd %userprofile%
cacls *.*>cacls.txt
Post cacls.txt. You may delete the file afterwards

Read other 9 answers
RELEVANCY SCORE 54.4

It's been goin on for a few days now I've ran spybot and a few other but none of them helped. I can't open internet options or download active X or use virus scans sites line panada it said I did not have permession pls contact your system adim and I am the only user and adim. Also my internet goes slow and I cant use any thing like bit torrent I'll run ad aware and I will get a fatal error in the blue screen and have to turn on my pc thxs alot here is my log file

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:13:39 AM, on 1/16/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVG7\avgemc.exe
C:\WINDOWS\system32\bgsvcgen.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\PSIService.exe
c:\Program Files\Microsoft SQL Server\90\Shared\sqlwriter.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe
C:\Program Files\DNA\btdna.exe ... Read more

Read other answers
RELEVANCY SCORE 54

I am Arun Kumar Kushwaha and I have discovered one Big Loophole/Security Leak in Microsoft's Windows 7 Operating System worldwide.
through which we can Access/Delete/Copy/Replace Important Data without Cracking/Resetting the Login Password in Windows 7 OS
and for this we not need any 3rd party Software/ CD/ DVD/ Pen drive/ CMD/ Script/ or any other means of hacking Devices/tool.

only through Windows 7 OS we can Access anybodies Computer Around the world, and user will never get to know that his/her computer has accessed by someone else.
This is purely Microsoft's Negligence towards user's Around the world.

U can assume how much serious is this Issue, if anybody can steal confidential Important data of Company/ Govt data/ or any other Sensitive Personal data of anyone who are using windows 7 OS.

I have Talked through telephone to MS India regarding this Issue and they told me that there is no loophole in their OS and can't be accessed by anyone without having Login Password or User need to Reset login Password with tool/software available.

also i have mailed to MS Technical support Team and also asked about this issue on Windows worldwide official support forum, but not get any meaning full response from them.

I am asking this message to here, coz i want to Spread this issue around the world, so every user can secure their Data and also MS can rectify this issue by releasing an OS Update.

Thanks for reading ..

Your's Truly
Arun Kumar Kushwaha

Read other answers
RELEVANCY SCORE 54

I have a set of folder I encrypted from my user account. I haven't figured out how to access them from my admin account.

In reverse, while logged on my admin account, I droppped some files into folder encrypted by my user account. I can't access those files when I log on as a user.

How can I get access to all my encrypted files regardless of which logon I use?

A:Access my user account encrypted files from my admin account?

Umm...if you could access encrypted files from another user that would remove the whole point of encrypting the files to begin with.

Read other 6 answers
RELEVANCY SCORE 53.6

I'm having some issues with my upgrade to win 10.

Programs that need elevated access are now asking me for both the Sys Admin and my local admin password.

Of course, the sys admin has no password and my local admin does. So no matter what I do, I get it wrong.

Earlier today, I was trying to reset the tiles in my start menu to default.

I followed directions I found on the web, activated the sys admin account, went to the sys admin account, the users app data tabletray..... But I kept getting the error that something " was already in use" and I couldn't copy all the files.
I went ahead and pasted what I had in my local admin and standard user account.
then I disabled the sys admin account.

Now, some programs icons I installed earlier today have disappeared. I have to go to an admin account to gain access and turn them on (MSI afterburner.....). And any program that needs admin access, I'm not sure if I'm giving it access or it's just starting without admin access. Seems like the next time I re-boot or log off, I have to do it all over again.

when a program asks for elevated access, it shows sys admin account AND local admin account above the password box. Is that normal? I could have sworn it only had my local admin account listed before.

If I have to re-install, where do I get the free win10 upgrade again? are those files saved on my pc?

Read other answers
RELEVANCY SCORE 53.6

For a long time I've had much difficulty understanding the exact difference between the computer administrator and a user whose type is administrator. On my system there are two administrators - one known as "Administrator" and another with my name, Gary or Gary and Susan. Each administrator has their own profile. I used Windows 7 Professional.

The distinction doesn't matter to system operation in general. With MS Office Professional, however, it does. When I start MS Word or MS Excel as myself, for example, it won't let me access the help files. When I try to, a message states "There is a problem with one or more installed help files. Please repair your office installation and try again." I ran the repair program successfully, but as myself I can't access the help files. When I log in as user "administrator", I can but the access is limited. I can also access all features of the program in safe mode. Yet when I log in as myself I can only access the help files if I run the program as an administrator. This perplexes me because my user type is administrator. This problem has occurred with other programs from time to time.

Would someone please help me understand this, and is there a workaround? I can set the privilege level to administrator which will permit me unrestricted access to the help files, but then a dialog box appears every time I start the program, which I'd prefer to not see.

Read other answers
RELEVANCY SCORE 53.6

For a long time I've had much difficulty understanding the exact difference between the computer administrator and a user whose type is administrator. On my system there are two administrators - one known as "Administrator" and another with my name, Gary or Gary and Susan. Each administrator has their own profile. I used Windows 7 Professional.

The distinction doesn't matter to system operation in general. With MS Office Professional, however, it does. When I start MS Word or MS Excel as myself, for example, it won't let me access the help files. When I try to, a message states "There is a problem with one or more installed help files. Please repair your office installation and try again." I ran the repair program successfully, but as myself I can't access the help files. When I log in as user "administrator", I can but the access is limited. I can also access all features of the program in safe mode. Yet when I log in as myself I can only access the help files if I run the program as an administrator. This perplexes me because my user type is administrator. This problem has occurred with other programs from time to time.

Would someone please help me understand this, and is there a workaround? I can set the privilege level to administrator which will permit me unrestricted access to the help files, but then a dialog box appears every time I start the program, which I'd prefer to not see.

Read other answers
RELEVANCY SCORE 52.8

Can I restrict access to the file only to one user (with administrator permission)? Even if another user has administrator permission.

ps it is about system file Windows\System32\drivers\etc\hosts if this is important.

A:Can I restrict access to the file only to one user?

Of course. But anyone part of the Administrators group can just take ownership and alter the permissions. Thus you shouldn't give people administrative power unless its absolutely necessary.

Read other 3 answers
RELEVANCY SCORE 52.8

Hai,
I need some help from expert here. Now i am using window xp and I want to share my file to somebody in the office. I don want to share to everybody and I right click the folder propeties then go the security and permission. But i faced a problem is that my other computer cannot find. how to i add the computer name in the list. Please advise me. thanks

A:how to set the permission to access the file from other user

You won't be able to assign permissions to the specific computer. Instead you will need to add the person's user account to the permission list.

Read other 3 answers
RELEVANCY SCORE 52.8

I added a password to my Admin account on my Windows XP desktop PC; it is the only account on the computer. When I added the password (through Control Panel - User Accounts), the system asked if I also wanted to block other users from accessing files on my computer, since even if I added a user account, they still would be able to see my files. So I said yes to the question.

Then I discovered that I could no longer access any shared folders on the desktop from my networked laptop. I deleted the password on my desktop pc, but it still won't let me access the files from my laptop. In Control Panel - User Accounts there is no option to unblock access to files. I tried my computer's help, but there was nothing there.

In Windows Explorer - Sharing, all the folders that I want to share across the network have the proper boxes checked, but they are now disabled.

This is occurring on my home system.

Does anyone know how to undo the file folder blocking?

Thanks.
 

A:User Account File Access

Try Setting Permissions for a File or Folder

To set the permissions for a file or folder:

Use Windows Explorer to locate the file or folder for which you want to edit the permissions.
Right-click the folder, and then click Properties.
Click the Security tab.
To add a new access control setting to the folder, click Add.
Select the users, computers, or groups that this access control setting is applied to, click Add, and then click OK.
To remove an access control setting, click Remove.
To edit the permissions for any group, select the user or group, and then use the corresponding check boxes in the Permissions pane.
Click OK to accept the settings, click Cancel to cancel any changes you have made, or click Apply to apply the changes without closing the file or folder properties.

 

Read other 2 answers
RELEVANCY SCORE 52.8

Ok I have a BIG problem i hope someone can help me with. Alright at first my floppy drive was not working, I tought it might be some system files missing so i did the system recovery thing by pressing F10 at the booting screen. Now my problem is that my original desktop had a password on it, I remember my password and everything but now i cant get access to my original desktop file in documents and settings,every time i click on it the message (Access is denied) pops up, is there any thing i can do to get access to it. please help!!! Oh by the way my my OPS is XP.
 

A:Can't access my user account file!!!

Hi,

I advice you to logon with the administrator user.
Right on the folder you can't access, select the Security tab and have look to the different authorizations.
 

Read other 3 answers