Over 1 million tech questions and answers.

hardware issue 2102 SSD not detected

Q: hardware issue 2102 SSD not detected

Hey Guys, I ran into a problem today. I changed the SSD in my P52S to another one. Restarted my the computer an started reinstalling Win10. During partitioning I could not remove any of the existing partitions. Furthermore it showed many 0,00 size partition. In total there were around 8 to see in the manager. I quit the installation and rebooted. The SSD is not shown in the BIOS. And the computer shows after the lenovo boot manager the error message 2102 with the drive. During replacing the drive I did not first removed the cable. I removed the tray with the drive while the cable was connected in the controller. The tray sat in its holder very tight and it got free from it abrupt with a yank. During this the cable got riped of the controller on the board. After the error message I inspected the controller and saw the top pins on one side are bend up. I tried to catch it on this pictures. https://www.dropbox.com/sh/px6py9cmx8oiabs/AAClQc-lYnzrLhvNzC6C25Xca?dl=0I could not find more unusual on the slot. I need advice on this situation.Thank you in advance

Read other answers
RELEVANCY SCORE 200
Preferred Solution: hardware issue 2102 SSD not detected

I recommend trying the free service from Zip Cloud. It's currently our users' favorite backup and storage solution and will save you headaches down the line.

You can get it direct from this link http://goo.gl/rFYDxc. (This link will open the Zip Cloud homepage.)

RELEVANCY SCORE 46

When I run the 'Trouble shooter' in 'Hardware & Devices' I always get a message at the end 'Hardware changes might not have been detected'. What does it mean and how to fix it? (I only have a very limited knowledge in computers.)

Read other answers
RELEVANCY SCORE 46

Hello: I'm new to Windows Seven forums, thus I come seeking help. I using Windows 7 Ultimate 64 bit (previously ran Vista Ultimate 64 bit), in configuring by WMC I recieve message "IR hardware not detected", however I can move forward or backward with RC6 controller. It is Microsoft's Media controller and receiver. In the device manager I find "eHome infrared receiver (USBCIR), Microsoft eHome Infrared transceiver and HID-Compliant consumer control device". All are in working order. During TV setup "select a working tv signal" I can see and hear the channel, but once I click next "IR hardware not detected" Also, I using windows 7 7100, help is needed. Thank you

A:IR hardware not detected

me having the same problem too,i bough a IR Controller and its working fine on WMC, but when i come to setup my TV Card, it can detect my TV Card, can even preview the video, but once i click on NEXT, the same error message prompted, i even bough an external USB Sigma Tel IR-DA dongle, oso cannot help....
anyone with any solution for this problem??

Read other 1 answers
RELEVANCY SCORE 46

I have had a myriad of startup problems now for about two weeks. Sometimes my pc starts up fine, and other times I have to go through the startup repair routine, and do a system restore. When I check my hardware after a problem the error indication is always on my PC. I can then fix the problem (drivers missing) by running the fix program but then a couple of days later it happens all over again.

The message is always "hardware changes might not have been detected" Can some one please tell me how to fix this for good. I am so tired of having to wonder if I will have a computer to use each day.

A:Hardware changes might not have been detected

What's about Inside your "Device Manager". Have you some yellow exclamation marks pointed on some devices?

You might want to check if pci or pci-e card are well inserted in their slots, if USB devices are well plugged too....

Read other 3 answers
RELEVANCY SCORE 46

When I plug in my mp3 or my digital camera my found new hardware does not pop up, it's like my usb ports are not detecting anything can you help?
 

A:new hardware not detected

Read other 16 answers
RELEVANCY SCORE 46

I have problems with my usb ports not recognizing hardware. and my dvd drive misreading dvds.Windows trouble shooters says hardware changes might have been detected. My laptop is an HP2000 350US with windows 7
 

A:Hardware changes might not have been detected

Read other 6 answers
RELEVANCY SCORE 46

Hi - just purchased a Gateway P7902h Laptop on the 30th - it came with 64 bit vista and I decided to upgrade the OS to Windows 7 (64x as well).
Ever since the install the laptop has been unable to detect my graphics card, a Geforce GTX 260M. Every time I open a driver installation program (Gateway site only has the drivers for Vista 64x so I tried those, then the Windows 7 64x ones from the Nvidia website.) I get a 'could not locate any drivers that are compatible with your hardware' error.
Looking through the Device Manager under Display Adapters, it only has the Standard VGA Graphics Adapter and not the actual card itself. Can anyone help?

A:Hardware not detected.

If you would navigate to device manager. click on the display adapter> properties> then details> in the drop down menu hardware ids> snip it and post the identification. And lets see if we can direct install a driver for it. Just in case you need to know. Thanks. Fabe A Preferred Method of Uploading/Posting Screen Shots

Read other 9 answers
RELEVANCY SCORE 46

Hello, my name is Izara. Recently i can't hear any sound from my laptop and awhen i clik the volume button it says "Hardwae changes might not have been detected" what does it mean? and is there  solution?

Read other answers
RELEVANCY SCORE 46

Hi. I am using hp laptop envy m6 touchsmart and suddenly my keyboard stopped working properly. Some of the keys are not working and whenever I press the letter q, a, and number 1 the key next to it presses automatically. I've tried troubleshoot and it says " Hardware changes might not have been detected". Please tell me how to fix this problem. I thank you in advance

Read other answers
RELEVANCY SCORE 46

I have an old laptop (aswell as my desktop), & am having problems getting it to acknowledge any new hardware through the USB port!

It's a...

DELL Inspirion 3000
Pentium(r)
48mb RAM
2GB HDD
(Running WIN95)
I also tried just plugging my new digital camera in (Mustek MDC-3500) through the USB port, - NO new hardware was detected!
Then when i went through CONTROL PANEL/ADD NEW HARDWARE...
it found nothing again! Tried to go through the manual "detect" process, but none of the choices for adding were USB, or even anything remotely resembling USB! Not even any choices for EXTERNAL MEMORY!

Could NOT get it to recognise my camera!!!

Help please Guys & Girls!!!

Do i need to obtain a driver? Is WIN95 not apt? Why does the lap have a USB port if so???
I tried to install my cordless mouse & it's sensor through the USB the other month, & nothing again!!!

IS this a lost cause? SURELY i can get it to recognise that something's been plugged into the USB port??? HOWEVER old the lap is!!!!!!
 

A:USB: New hardware not detected!!!

Windows 95 revision B (or was it C or D?) had limited USB support, earlier versions had none.

Even with USB support Win 95 is unlikely to work with the camera. The specifications say Windows 98/ME/2000/XP

The presence of USB ports is no indication of their being useable.
 

Read other 1 answers
RELEVANCY SCORE 46

I got a new T440s with a standard disk hard drive. My coworker gave me a Crucial SSD 512GB drive to swap in its place. I imaged the current drive on to the SSD and inserted it. Upon boot, before the boot sequence I receive the 2102 error. There is nothing in the SSD2 slot, as we didn't buy this option. The theory in my workplace (tech firm) is that I may have accidentally turned power on while swapping the drive while no drive was in the primary slot. How/where in the bios do I keep the machine from looking into this slot to boot? Currently what happens is the error is thrown and I have to hit escape to boot windows. This is a minor inconvenience, there is no loss of functionality, but when powering up on a dock or rebooting, it requires user presence. Thanks for your help.

A:2102: Detection error on SSD2 (M.2)

t440s might have three slots for drives - one sata III 2,5" and two m.2 slots. Usually new laptops with HDD are shipping with cache m.2 SSD which is placed in the 3rd slot. Since error 2102 is msata drive detection related I'd suggest to check out your laptop configuration and remove small SSD since you have primary SSD drive. But at first check out the function of small SSD drive - cache only or/and hibernation partition storage. And disable appropriate features for that drive.

Read other 5 answers
RELEVANCY SCORE 46

Hi, I have been getting this error when I boot the computer and I have to press the escape key for over three months now. I've been doing all kinds of research on here and on google and tech sites. Everyone says that its because the drive in that slot is bad or the connection to it is bad. Well I don't have a drive there. I have also done all kinds of tests, Shot tests long tests and even longer tests and every single test passed with flying colors. I'm so lost on what to do right now. The computer is less than a year old, and I have had so many issues. Its crashed and burned three times in the last two months. I am always able to safe it though but this is something that I just an't seem to find a fix. Help? is there a way I can just disable the warning or error message in BIOS?Thank You, T550 20CK ThinkpadIntel Core i5-5200U Processor (2.20GHz)4.0GB RAM1x500GB SATA,1x16GB NGFFWindows 7 Professional 64 preinstalled through downgrade rights in Windows 8.1 Pro 6415.6in 1366X768Intel HD Graphics 5500720p HD CameraFingerprint ReaderUltraNav (Multitouch)EthernetIntel Wireless 7265AC(2x2)+BT4.0 M.2 ComboBluetooth 4.03 Cell Li-Polymer

Read other answers
RELEVANCY SCORE 45.6

Hi guys,

I desperately need some help. All of a sudden I'm not getting any sound from my system. I have an Asus Xonar D2 installed, windows recognizes it but no sound comes out. Connected speakers, headphones, nothing works. Thought it might be faulty sound card, so I decided to buy a cheap Creative Audigy. Installed hardware and software, Windows recognizes it but still no sound. I'm dumbfounded, no clue what to do.

I re-installed back my Asus Xonar, re-installed software/driver, Windows recognizes (Working Properly) but NO SOUND.

No conflicts in Device Manager.

If it were PCI/MB failure I would assume that Windows won't be able to detect it.

Any ideas, cause now I'm going crazy.

PS. Re-installed Windows as well. Nothing works

A:Hardware Detected but no sound

Well,

First off don't freak out XD.

Second, Try going to the manufactuers website and download the drivers from there. if that don't work let me know.

Read other 5 answers
RELEVANCY SCORE 45.6

I just got GTA Vice City. When I go to set up the options, it says No Audio Hardware. This really sucks. I have a Hercules Digifire with the latest drivers.
 

A:No Audio hardware detected

try reinstalling the game, and install the latest patch for said game. the patch will be avalible via internet on the game maker's website, but to save time i'd run a google search.
 

Read other 2 answers
RELEVANCY SCORE 45.6

Hi there, I have a problem with my bluetooth. It used to work, but i haven't used it for about a year and the system was reinstalled a couple of times since then. My operating system is Windows 10 64bit build 14393.My model is Thinkpad T510 4384y17In the BIOS security I/O blutooth is enabled A can't find any bluetooth or unindentified device in device manager. As i recall from windows 8 the bluetooth have an inbox driver, so it should be automaticly installed with the OS. The FnF5 also doesn't work for me in windows 10, and i can't find any driver or on screen monitor upgrade, that would help. Checked with multiple "driver detector" software, non of them found anything. Also i checked, that the hardware is connected properly. Do you have any suggestion what should i try? Thanks,Shad

Read other answers
RELEVANCY SCORE 45.6

I have a 2006 HP Pavillion DV 9000 laptop that doesn't show any wifi hardware in Device Manager. It has a functioning ethernet adapter in DM that I used to download Windows updates but I can't find a driver update for this adapter. There are four entries under Other Devices in the DM: 2 for Base System Device, 1 for Coprocessor and one called Unknown device.
I downloaded all ccritical updates and some optional along with uninstalling each of these entries and rebooting hoping the drivers would be installed.
There is a switch for Wifi and indicator light on the front of the unit. This switch has a power light that stays orange no matter what position I put it in.
I am open to all ideas.
Thanks
 

Read other answers
RELEVANCY SCORE 45.6

Hi There,
I have a HP Zv 5000 laptop. I was having window xp boot up problem. So I decided to re-install window xp. After all the set up, somehow my mouse touchpad did not get detected! Anybody have any suggestions? Please help..I appreciated!
 

A:Mouse Hardware not Detected!!!!

You need to reinstall the driver for it. Look on the discs that came with it or here http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&lang=en&dlc=en&product=385148&os=228
 

Read other 1 answers
RELEVANCY SCORE 45.6

hello and thanks to anyone who may reply! I recently re-formatted my computer and i seem to have a problem with my sound card (?). When i try using windows media player, i get the following message: "cannot play back the audio stream: no audio hardware is available, or the hardware is not respoonging". i went to the control panel just to test sounds etc, but can't even do that... the option is not available to me. ANY ANY ANY ideas as to what i can do?

thank you v. much and Merry Christmas!
 

A:audio hardware not detected

Try uninstalling your sound card from the Device Manager, then reboot, and reinstall it.

Which sound card is it by the way?
 

Read other 5 answers
RELEVANCY SCORE 45.2

Hi, The topic isn't new but I haven't found the solution yet. Some time ago (about 2 months) my sata ii (3gb/s) seagate momentus strated freezing, but since last 3 years it was working fine. I thought it's broken. I boughts new sata iii wd blue 1 tb. And this one is not working at all with my ultrabay (not original) drive. Only works very olg 80gb seagate 1,5gb/s sata I hdd. If I put seagate momentus (the previous one) it shows the disk but system freeze.  The same with the new one. BIOS recognizes new wd blue but tests keeps houres (its veeery slow). What could be the problem? The adapter is broken in some way or wd blue doesnt fits. The same is with another sata ii hdd (nothging at all) and with sata iii samsung 840 ssd (only once it shows in explorer) - then nothing. System doesnt see modern disks at all and freezes. Wd blue of course works fine plugged into hdd0. Greatings!

Read other answers
RELEVANCY SCORE 45.2

Ok, this is my problem guys, and i have searched everywhere and nothing is been solved.

I have an very old US Robitics 4 port router and a Linksys SPA 2102 VOIP adapter connected to the Router.

So what i am trying to do, that i could of done before is portforward. The thing that bugs me, is that i get 3 Different ip's from nowhere. !st ip shows when i go into command prompt, and shows my ip, then one shows on my router (probably my lan ip) and the VOIP shows my real ip. So my question is how do i portward through these 2 objects and get decent connection with Uttorent etc...
 

A:Router+ Linksys SPA 2102 VOIP-Portforward

Hi

Your PC has an IP address, such as 192.168.1.5
Your router has an IP address, usually similar to your PC address such as 192.168.1.1
Your actual address is assigned by your ISP, this could be 212.112.234.45.

To port forward you tell the router to send port requests to the IP of your PC.

So to port forward for utorrent you find out which ports are needed (such as 6165)then in your router port forwarding section you tell it to forward requests for port 6165 (example remember) to the IP of the PC 192.168.1.5.

See

www.portforward.com for further help.

Regards
 

Read other 3 answers
RELEVANCY SCORE 45.2

This error has popped up several times in the month I have had this laptop. Most recently its happened a few times when im out of the room and return. Microsoft edge with a few tabs open, fusion 360 cad open (at idle) The other times have been when I have attempted to transfer all my iphone photos over to the ssd (30 gig) would crash within the first 5 gig. Does not crash durring benchmark loads, timespy, crystal disk mark... It came installed with an single intel 500gig ssd. No other large issues with computer. some noise from the rtx3000 im sure is un related Ideas? bad drive?

Read other answers
RELEVANCY SCORE 45.2

I would like to upgrade the wireless card (Broadcom 802.11 g) to an N card, dual band if possible. My question is; what is the right card and part number? I believe the HP Mini 5103 card will work in the 2102, but I am not certain of this capability. Does anyone know the best wireless adapter card to swap out? Thanks in advance for any help!

A:HP Mini 2102 wireless card upgrade

Hi, Have you heard WiFi whitelist in BIOS ? I don't know the model/product of your HP Mini 2102 but I believe this series came out around 2010. The chance to upgrade wifi card for machines which were built before mid 2014 is from very, very, very slim to none. Regards.  

Read other 2 answers
RELEVANCY SCORE 44.8

I accidentally uninstalled my IDT Audio Drivers. Now my audio does not work at all. When I go to install the drivers suggested by the HP Software Support section, the drivers display this message during installation: "The hardware detected is not supported by this IDT software package. The install will be aborted".  HP Probook 4441s

Read other answers
RELEVANCY SCORE 44.8

Hi, I installed the WIndows 7. I tried to install the IDT High-Definition Audio Codec Driver from HP support drivers, but could not install successfully. Here I am getting the error as:The hardware detected is not supported by this IDT software package. The install will be aborted Also one more issue, when I hover to sound icon in taskbar, it gives below tooltp:No audio output device is installed Any help would be appriciated Thanks,Sanket HP Notebook Model: HP Pavilion DV5-1104TUOS: Windows 7 (32 bit) 

A:The hardware detected is not supported by this IDT software ...

San. Try this first then reboot. http://ftp.hp.com/pub/softpaq/sp41501-42000/sp41697.exe Then try this one. http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45497.exe REO

Read other 1 answers
RELEVANCY SCORE 44.8

Hello, I'm using HP Pavilion dm4-2180us Entertainment PC. Recently, we bought a new home theatre for our home. When I'm trying to connect it using HDMI cable, the output of it is only the video but not the audio. So when trying to install the audio drivers I'm getting it like this "The hardware detected is not supported by this IDT software package. The install will be aborted".Im using windows 8.1 in my laptop. I wish this problem will be solved. Also, when I connect the same laptop and HDMI to TV, I'm getting both the audio and video. When I connect another HP laptop to my home theatre system, both the audio and video are transferring. Thanks in advance,Vikas













Solved!

View Solution.

A:The hardware detected is not supported by this IDT software ...

Hi, Actualy audio in this case comes out from the video card, and it needs video driver. But before spend time for driver, please check the speaker icon on the right hand corner and enable HDMI sound. Right click the spekaer > Click playback devices > Enable HDMI Sound. If can't find HDMI sound, turn off laptop & TV then turn on TV first. Regards.

Read other 5 answers
RELEVANCY SCORE 44.8

My hardware scan on my laptop found an error in the Storage Devices section; the Targeted Read test and the SMART Short Self test and Drive Self test both failed. It gave me an error code and told me to make an e-ticket, but the link they gave me only goes to Lenovo's home page, I think because my 1-year warranty expired two months ago. Is this something I can fix, or as far as function goes, something I need to be concerned about? If it's affecting my computer, I can't tell how.My other issue is that, after upgrading to Windows 10, I get a notification that they can't find the license information for my AMD Quick Stream every time I turn my laptop on. Any fixes for that?

Read other answers
RELEVANCY SCORE 44.8

Good Day, Please assist, Upon running Lenovoo Solution Center scan, I received the error of "Failed, Hardware scan has detected one or more fails" Result Code: WHD01V01I-UL7AHH Feedback would be highly appreciated. Kind Regards,Yastheel  
























Capture.PNG ?32 KB

Read other answers
RELEVANCY SCORE 44.8

Hi, My lappy's Audio drivers crashed due to some reason.It's showing red dot with cross symbol on taskbar volume button and when I hover on that trey icon, it shows no audio output is installed. Now I am trying to install Audio drivers for same from hp website but, its giving me this error as The hardware detected is not suppoted by this IDT software package (Also one thing want to mention, when I open Device Manager screen, it is not showing sound, video and game controller option..its missing from there) Please help me resolve thisThanks

A:The hardware detected is not suppoted by this IDT software p...

Hi there @sanketwakhare?,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I understand you are having an issue with the audio driver. I will be glad to help you. Do you know if your computer came with the Nvidia or the Mobile intel sound card?There are drivers at hp.com/support for each and only the one installed will work. Here are some documents that may help.No Sound from the Speakers (Windows 7)Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below!  Thanks.    

Read other 2 answers
RELEVANCY SCORE 44.8

I have recently bought S510 Tower Desktop; and the specific model is 10kxa004ih I have installed Ubuntu and Windows 10; both of them do not detect WiFi hardware. I have updated all the Windows 10 drivers from the support website.  Any help?

Read other answers
RELEVANCY SCORE 44.8

My computer had a crash and I tried to restore it and everything came back except for my internet connection. I get the error message that network hardware can't be found. It's as if I never had access to the internet and I did earlier that day. When I go in the device manager I get these messages and I don't know if any of them would affect my internet connection. Can someone help me with this. I am new to computers?

1. Direct memory access controller - says ? No drivers are installed for this device
2 .High Precision event timer - says ? No drivers are installed for this device
3. Intel (R) 5 Series/3400 Series Chipset Family SMBus Controller - 3B30 - says ? No drivers are installed
for this device
4. Numeric data processor - says ? No drivers are installed on this device
5. Programmable interrupt controller - says ? No drivers are installed for this device
6. System Speaker - - says ? No drivers are installed for this device
7. System timer - says ? No drivers are installed for this device

Montel thanks you!

A:Windows 7 Pro 64 bit Network hardware not detected

Hi ... Welcome to Seven Forums ... You need to Install the Chipset Driver ...

As you have a HP Pro the Driver can be found at the HP Website ...

Look under System Information for your Computer Model Number ...
You can also Post your System Information in My System Specs ...

The Link below will help you achieve this
System Info - See Your System Specs

Read other 9 answers
RELEVANCY SCORE 44.8

everytime i start up my computer i get the "new hardware detected" screen asking if i want to search for drivers now or next time the device is plugged in or never again.

now the only thing i usually have plugged in is a USB external hard drive but even when that's not plugged in the box still comes up.

also in the device manager there is an unknown device even if nothing is plugged in.

i had vista ultimate running for about 3 days before this started happening.

anyone know what to do?

A:New Hardware Detected all the time on start up

May be a motherboard driver.
Try a restore point to before this started happening.
Try looking in your error logs.

Read other 3 answers
RELEVANCY SCORE 44.8

I accidentally uninstalled my PC audio and IDT audio drive. When I tried to reinstall the IDT audio driver, I got this message. Please help me. My laptop model is HP ENVY dv4-5313tx running on windows 8. Thanks.











Solved!
View Solution.

A:The hardware detected is not supported by this IDT software ...

Check Device Manager for unknown devices and update the same. Try this package:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112413-1&cc=us&dlc=en&lc=en&os=4132&product=5363689&sw_lang= ALSOTry upodating from HP Support Assistant which will autodetect components/upodates.Link for HPSA:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en&os=4132&product=5363689&sw_lang=

Read other 7 answers
RELEVANCY SCORE 44.8

I just got a new Compaq Presario S6000CL-B and it won't initialize my old HP ScanJet 2100C. I really like this scanner and I have things that I need to get scanned in right away. Can anyone tell me how to get this thing working.
Thanks!
 

A:Computer Upgrade Hardware not Detected

Have you installed the drivers and software for the scanner? The original software might not be XP compatible in which case you shouldn't install that but download the latest from teh HP website.

http://h20015.www2.hp.com/en/softwa...osoft Windows XP&sw_lang=en&pagetype=software
 

Read other 2 answers
RELEVANCY SCORE 44.8

I reinstalled windows xp but now I can't install the audio driver and get the error message as shown in subject line, I think I also downloaded latest BIOS drivers but problem persists. following is the specification of my notebook (as I saved this last time when my notebook was working fine)  thanks for the help.HP Mini 110-1025DX PCProduct Number: VA723UA-----Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)Language: English (Regional Setting: English)System Manufacturer: Hewlett-PackardSystem Model: HP Mini 110-1000BIOS: KBC Version 02.0BProcessor: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (2 CPUs)Memory: 1016MB RAMPage File: 514MB used, 1927MB availableWindows Dir: C:\WINDOWSDirectX Version: DirectX 9.0c (4.09.0000.0904)DX Setup Parameters: Not foundDxDiag Version: 5.03.2600.5512 32bit Unicode











Solved!
View Solution.

A:The hardware detected is not supported by this idt software ...

Hi Try this version see if the helps http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-78626-1

Read other 8 answers
RELEVANCY SCORE 44.8

I have Realtek High Definition Audio and Intel(R) Display Audio.
My Problem is I suddenly lost my Sounds in my laptop and Dont know how to fix it. I tried reinstalling the Drivers and It fixed, But when i shutdown my laptop and turn it on again it dosent have sounds again :/ and i tried to troubleshoot it and it says ?Hardware changes might not have been detected"

Read other answers
RELEVANCY SCORE 44.8

I have recently bought S510 Tower Desktop; and the specific model is 10kxa004ih I have installed Ubuntu and Windows 10; both of them do not detect WiFi hardware. I have updated all the Windows 10 drivers from the support website.  Any help?

A:WiFi hardware not detected - S510

malayk wrote:
I have recently bought S510 Tower Desktop; and the specific model is 10kxa004ih
 
I have installed Ubuntu and Windows 10; both of them do not detect WiFi hardware. I have updated all the Windows 10 drivers from the support website. 
 
Any help?

Hi malayk and welcome to the community,
 
Did the Wifi work before you duel booted? I have seen it a few times now that the Linux and windows drivers conflicts stopping each other from working.
 
Best advice i can give is to install one OS and test to make sure there is not a hardware fault.
 
Hope this help you and let us know how you get on=====================================================================================Did someone help you today? Thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
 
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Read other 1 answers
RELEVANCY SCORE 44.8

Hi, I'm new to this forum. Iv been having issues with windows 7 after i did a fresh install, it will not detect my audio speakers or my headphones. I was thinking that i might need to update the bios, but that seems to be impossible. Iv looked everywhere and cant find a update for it. Maybe you guys can help?  
 
http://oi46.tinypic.com/5al7bm.jpg
Here is a shot of the desktop with the icon in the corner.
 
http://oi48.tinypic.com/besi3d.jpg
Windows is not detecting my hardware
 
http://oi46.tinypic.com/162af5v.jpg
System INFO
 
http://oi48.tinypic.com/rt0ysx.jpg
MOBO/BIOS info.
 
http://oi49.tinypic.com/24vogb6.jpg
Showing that there is hardware and that its updated.
 
Any info would be nice. I'm probably just missing something and its right in front of me. 
 
Thanks

A:Windows 7- "No audio hardware detected"

Any help would be nice. thanks 

Read other 7 answers
RELEVANCY SCORE 44.8

Almost immediately after my warrant ran out I got a message stating that a Hardware Scan had Detected an error. Result Code WHD01V001-WM7WMF  It seems related to a Targeted Read Test and a Smart Short Self Test.  I had warnings on each of the Wireless Test also but I'm not sure the Wireless Network Adapter has ever worked on this well. At any rate, the computer is dragging so something is wrong but I can't pinpoint it. I don't have any known issues with virsuses or programs running in the back ground.  Unfortunately we don't have the money to get it fixed right now and I'm hoping that I can find some solutions or answers here. Any help would be much apprecited. Thank you. 

A:Hardware Scan Detected Error

Sounds like a disk problem.  Get a copy of CrystalDiskInfo (freeware) and see what it thinks of your HDD.

Read other 1 answers
RELEVANCY SCORE 44.8

I have two HP Minis; a 2102 and a 110-1025DX. Both are running Win 10 Pro, and have similar programs loaded. For a few reasons I would like to be able to swap the hard drives between these two devices, but I'm not sure how feasible that would be. My questions are:Would the Win 10 Pro OS be recognized by the new devices? Could I simply  change the Product Key after swap to "force" an acceptance?Drivers: I do not know how the drivers might be loaded. They both use HP Assistant, could I simply run that to load the best drivers?The "detail" issue here is my MS Office programs; one of my main goals is to move Office 2010 Pro Plus to the other Mini, but I have lost the installation media. I've been told Office 2010 Pro Plus cannot be downloaded from MS like other Office products.Anything that I'm missing?Thanks in advance for help on this question. 











Solved!
View Solution.

A:Swapping hard drive on HP Minis (2102/110-1025DX)

If both laptops are licensed to run Windows 10 i.e. are "activated" you should be able to swap the hard drives. Windows 10 is activated by Microsoft servers and they should recognize that the transplant host (I will use donor and host to refer to the original computer that had the hard drive and the computer where it ends up, respectively) is OK to run Windows 10. Just to be sure I would have the Key for the host handy but you should not need to use it. Drivers will likely not be an issue as netbooks all are essentially the same hardware. If you are worried, drivers for the host system are held in a C:\swsetup folder on the hard drive which you could copy to use if needed in the host system after transplant.  The issue is the activation of the Office program. I am not as familar with how its licensing and activation works but I think there may be a copyright or EULA issue with what you are trying to do.  You can buy MS Office 2010 Pro Plus for not much cost: http://www.ebay.com/itm/Microsoft-office-2010-Pro-Plus-licence-Key-download-link-digital-Edition-/152244963867?hash=item237281ca1b:g:6xwAAOSwLnBX3Qgk http://www.ebay.com/itm/Microsoft-Office-2010-Professional-Plus-Full-version-For-32-64BIT-D-L-KEY-/262623934769?hash=item3d259b3931:g:AwgAAOSwQNRXME2X

Read other 4 answers
RELEVANCY SCORE 44.8

I've read through the posts and still do not have a clear way to resolve this issue.  I find it interesting that I have to take my computer a part to reset the mini drive? It does not appear that a good fix for most users? What I don't understand is why I cannot I disable this in BIOS? Anyone have a real solution to this? I see no option to make this error go away? Anyone know if this part can be replaced i find no part number? It also looks like this model Laptop also has a fan issue. It's acting up and I want to replace it but its no longer available? Any other options?

A:2102: Detection error on HHD2 (Mini SATA)

It may help others to help you if you indicate what model laptop you have.
 
Z.

Read other 1 answers
RELEVANCY SCORE 44.8

ok the specs of the machine are

AMD athlon xp 2100+ mb is a gigabyte 7vt600-rz
2 512mb ram in the last 2 slots
500 watt psu
a maxtor 40 gig hdd
a cdrw lite on, and a cdrom.

only the floppy cdrom and hard drive are hooked up all on there own cable with only one device on each.

the cdrw is failing to read disks at the moment although it worked earlier today.

ok the problem comes in when I try to fdisk the drive I have jumpered it to master and cable select. both only let me see 2gigs of the 40gig drive to fdisk if I say I dont want the maximum it says it has 8gigs but I can only fdisk 2gigs though there are no other partitions the first time I fdisked it showed all 40gigs but since then it only shows 8 or 2 depending on what I am doing atm the hdd has the dos system files on so it can boot but that is all any suggestions would be great Derrick

A:possible hardware issue...[moved from hardware]

just curious how is this an win XP issue when I am not even getting to the point of installing?

Read other 4 answers
RELEVANCY SCORE 44.4

Just curious, Why ?? A video driver is software. I get a yellow exclimation point in the Windows Performace tab saying I need to run WEI again.

A:New Hardware Detected After Updating Video Driver

Although an updated driver is software it may improve the graphics performance, which in turn may give you a higher WEI score.

As far as Windows is concerned your hardware has been updated and for that reason will prompt you to update your Windows Experience Index.

Read other 5 answers
RELEVANCY SCORE 44.4

I have a Kingston flash drive 8gb usb 2.0 just like this one:

http://www.hk-juhuang.com/bigpic/12/...0604165531.jpg

but for some reason it's not working on my pc/laptop/ps3 and any other computer I tried it on.

when I plug in the flash drive I don't get any detected sound on my windows and it's not there on my computer either, just like as if it wasn't plugged in at all, I tried using different usb ports and it's the same, I'm guessing it's a hardware problem with the flash drive itself not software at all.

I don't care about the flash itself but the files inside the flash are really important to me I just need to copy them on my PC and that's it.

I'd really appreciate your help guys.

A:Kingston flash drive not detected (probably hardware)

Hi Jackbauer, Welcome to the forums , Downlaod this little test utility program Download H2testw 1.4 Free - Check your USB for errors with this tool. - Softpedia may be of some help

Read other 1 answers
RELEVANCY SCORE 44.4

Hello. I have an issue with my G710 laptop.My Nvidia 820m graphics card was working just fine until Windows automatically upgraded to Windows 10. My PC hasn't been able to detect my Nvidia graphics card since the upgrade. I can't install the Nvidia driver because the driver can't detect my hardware. The Nvidia hardware is not visible in device manager, but i can find it under hidden devices, where it says that the hardware is not connected to the PC anymore, (Code 45 error). I have done tons of research on the internet, and tried different solutions, but nothing is working. I have even gone back to Windows 8.1 now, but it still can't detect my hardware and it hasn't been physically removed for sure. Any help is appreciated! Thank you  

Read other answers
RELEVANCY SCORE 44.4

Hello, my sister recently dropped her dell latitude d520 and when she turns it on now it says no bootable devices and no hardware detected. I was thinking about buying a new hard drive online and replacing the old one. Any ideas on where to buy? And also just to make sure will the Operating system she had before still be there or will i need to install a new one? Thanks
 

A:Dell Lattitude No Hardware Detected Error

If the hard drive has failed, the operating system will also be a "gonner" so you'll need to re-install Windows on the new drive.

However, to be quite certain that it has failed you can test it with the drive manufacturer's own diagnostic software for DOS. The links are here: http://www.tacktech.com/display.cfm?ttid=287

The DOS version is an ISO file from which you can create a bootable CD using IMGBurn: http://filehippo.com/download_imgburn/

When you've created the CD, boot your sister's laptop from it to test the drive using the "Long" or "Extended" test if available.
 

Read other 2 answers
RELEVANCY SCORE 44.4

Hi all,
For the last several weeks now on startup on my laptop running Vista I keep getting a pop up stating new hardware has been detected and do I want to install the driver for it. I select yes windows looks for a driver but cannot find one. I have looke in device manager for anything that is amiss. And under other devices there is the yellow mark stating that there is a problem. The only thing I can find out is that it is a plug & play item, no specific name or anything to tell me what it maybe. When I select Properties for the said device the details I am given are \Device\00000025 and that it is not configured correctly. Is there anyway I could find out what this is ? Or should I uninstall it and reboot, and hope that the problem gets fixed on startup.
Thanks. Wizzkid
 

A:Solved: New hardware detected unknown device

Bump
 

Read other 1 answers