Over 1 million tech questions and answers.

Y50-70 Touch not waking up from sleep mode. Blank lit screen. Also Driver power state failure

Q: Y50-70 Touch not waking up from sleep mode. Blank lit screen. Also Driver power state failure

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Y50-70 Touch not waking up from sleep mode. Blank lit screen. Also Driver power state failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 204.8

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 150.4

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 133.2

New build i7 asrock motherboard W8 Pro. when waking from sleep everytime I get driver_power_state_failure BSOD.
Looking for some help on where to start. Updated the bios and everything else works great.

Thanks for any advice

Attachment 14584

A:BSOD Driver Power State Failure when waking from sleep

You have 3 hard drives - what is the make/model/wattage and age of your Power Supply?

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with you... Read more

Read other 5 answers
RELEVANCY SCORE 133.2

Dear Sir/Madam,

I've been having this issue since updating to Windows 8.1. I will wake my computer from it's sleep and a few minutes later I get the BSOD. In one notable event early on, I got two in a row after the computer restarted from the previous BSOD.

I fiddled with my power settings (I was trying to avoid my computer actually shutting down during sleep/hibernation) a few months ago and after that I didn't have any BSOD events that I recall until this past week. When they do happen, they tend to happen in rapid succession, as you can see from the dates on the collected data I've attached (I see there's a .txt file with all my computer's information for you reference) - I've had one every day for the past three days.

I've read through many of these threads and tried several of the solutions. I am running verifier.exe since the BSOD has started up again since from what I can understand from reading the .dmp file and this forum that the message I'm getting about ntoskrnl.exe is misleading (?).

Please take a look at the dumps and other information collected from the DM Log Collector Tool and let me know if you can help me solve this problem.

Thank You.

A:BSOD Waking from Sleep (power state driver failure)

Hi, pnutbudder,

I've been having a similar problem since a few weeks ago. I suspect this is due to a recent Windows or driver update, since both of us had the same problem at the same time. I'm going to take a look at your dump files in a few hours, but in the meantime, could you tell me

1. whether you have Evernote or any Blizzard games installed
2. whether you've installed any new programs recently,
3. what graphics drivers you have installed,
4 what music or audio programs you have installed (eg, music players, movie editors, music studios and recording programs, game streaming programs)?

EDIT: Okay, I took a look at your dump files, and they point to a bad interaction between the "usbccgp.sys" and the "ksthunk.sys" driver. These are the same drivers that are misbehaving on my system, too (Lenovo Y510P). As far as I can tell, the only device that uses ksthunk.sys is the Lenovo EasyCam. Try this fix:

1. Download the "Broadwell" version of the camera driver on this page: http://support.lenovo.com/us/en/prod...loads/DS101169 . We're going to replace your current camera driver with Lenovo's original camera driver.
2. Open "Device Manager" by right-clicking on the lower left corner of the screen.
3. Double-click "Imaging Devices" to open it.
4. Right-click "Lenovo EasyCamera" and click "Disable". You should see a small downward-pointing arrow appear next to the picture.
5. Right-click "Lenovo EasyCam... Read more

Read other 5 answers
RELEVANCY SCORE 124.4

I am experiencing an issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.

I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.

Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.

A:Driver Power State Failure in sleep mode

Hi M15 and welcome to the forums ^_^,

I am in the process of analyzing your dump files further. Below has been provided analysis of your dump files for Informative purposes.

Code:
**************************Fri Jun 6 04:50:12.040 2014 (UTC + 5:30)**************************Probably caused by : storport.sys ( storport!RaSendIrpSynchronous+70 )

BugCheck 9F, {4, 12c, ffffe0017919e880, ffffd00049969950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_storport!RaSendIrpSynchronous

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Version V2.20

BIOS Release Date 02/18/2013

Manufacturer Acer

Product Name Aspire M5-481PT

??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jun 6 01:42:48.219 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for iaStorA.sys

*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys

BugCheck 9F, {3, ffffe000d7f8e060, ffffd000ca5e9930, ffffe000da3955c0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_disk_IMAGE_iaStorA.sys

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Ver... Read more

Read other 12 answers
RELEVANCY SCORE 122.8

Hey!

I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD..


However the system managed to dump two files for me on BSOD.

Take a look and thanks for the help you give me :)

A:DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hello,

Please take a look at the following thread and perform all of the requested steps.

Once you have all the requested reports please attach back here.

http://www.techsupportforum.com/foru...ta-452654.html

One dump is really not sufficient to determine the cause. The reports will also provide other info to help diagnose the issue.

The dump provided indicates a problem with the Realtek Network driver please try updating or re-installing this driver.

Realtek

I would also suggest that you fully update Windows including the Windows 7 Service Pack.


Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03268000 PsLoadedModuleList = 0xfffff800`034a5e50
Debug session time: Fri May 10 12:00:54.715 2013 (UTC - 4:00)
System Uptime: 0 days 8:41:33.010
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *... Read more

Read other 2 answers
RELEVANCY SCORE 122.8

I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't help. The problem only started occurring after one of the following:
- Updating Malwarebytes to latest last week
- Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were)
- Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com
Here is a log created by BluescreenView:
==================================================
Dump File : 060514-96281-01.dmp
Crash Time : 6/5/2014 7:23:39 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe001`218f88e0
Parameter 3 : ffffd000`bff2b930
Parameter 4 : ffffe001`2561d1c0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153fa0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+153f... Read more

A:Driver power state failure after resuming from sleep mode

Hi Lan1 and welcome to the forums ^_^,

I have analyzed your Dump file and below has been provided an analysis of your dump file for informative purposes :-

Code:
2: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00135b5c060, Physical Device Object of the stack
Arg3: ffffd000c3df9930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0013217d880, The blocked IRP
Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3
DRIVER_OBJECT: ffffe00135b70c30
IMAGE_NAME: usbccgp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52678625
MODULE_NAME: usbccgp
FAULTING_MODULE: fffff80157d82000 usbccgp
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`c3df98f8 fffff801`31803c1e : 00... Read more

Read other 7 answers
RELEVANCY SCORE 122.8

Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is greatly appreciated.

A:BSOD During Sleep Mode - Driver State Power Failure

Hello fran.

It appears that Avast is causing the BSODs there.

avast! Self Protection Driver

Code:
fffff880`02677de8 fffff880`068e2940Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2f940
Description here: Driver Reference Table - aswSP.SYS

avast! Virtualization Driver

Code:
fffff880`02677d68 fffff880`066d32ccUnable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x4e2cc
Description here: Driver Reference Table - aswSnx.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Using more than one antivirus program is not a good practice. It will make your system unstable in turn. Uninstall McAfee Using McAfee Removal Tool.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it... Read more

Read other 1 answers
RELEVANCY SCORE 122.8

I have tried to test this issue my self by trying to read trough the DMP file and Event Viewer. (haven't done this before, so i think i have possibly overlooked something)
The computer model is: HP ProBook 430 G2
The things i have tried is uninstalling and updating the drivers.
Using another OS Disk (It worked fine when doing this)
Starting in safe mode (This also worked fine)
Checked advanced power settings (Was nothing wrong there from what i could see)

Read other answers
RELEVANCY SCORE 122.8

I am using lenovo G580-20150.
I know this problem have been opened a tread but the problem i dont' think it's same so i woud like to ask for some solution after listening to my problem.
I have been user of windows 8 and 8.1 for quite some time.
everything works fine for me for the windows that i currently using , windows 8.1.
including i can put in sleep and wake it as usual.
but ! since past few days i notice that my computer getting weird when i enter sleep mode (for example closing the lid)
it crash... it bsod.

And it occur since the day after i installed somekind of VPN software and wiFI sharing that my friend gave me.
After that day, i can't put my computer into sleep. whenever i do that it keep crash.

at first , i thought lenovo energy management that cause the prob
so i uninstalled... it still makes no different , still i can't put my computer to sleep.
after that i uninstalled the vpn and wifi sharing software, it still makes no different.
But i am very sure that the vpn and wifi sharing software cause the problem.

Because before this everything works fine until that two software comes to my computer. I really need someone that able to analysis the dmp file. TQ

I willing to learn and contribute if i were given the opportunity . tq

A:Driver Power State Failure after enter sleep mode

Hi Eric & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe00175b29e10
Irp is active with 3 stacks 2 is current (= 0xffffe00175b29f28)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe00177cc0050 00000000 fffff8025f7952d8-ffffe00173c59d60 Success Error Cancel pending
\Driver\tunnel nt!PopRequestCompletion
Args: 00015600 00000001 00000004 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00173c59d60
Args: 00000000 00000000 00000000 00000000


Now, as we can see from the Dump file analysis, "tunnel.sys" has been blamed which is the Microsoft's Tunneling Driver but since it is a component of Windows, chance of it being the culprit is extremely low. This means your guess that the BSOD are caused by the VPN Software.

On checking the Drivers, I found the SoftEther VPN installed on your system. Please uninstall it from the system and see if the system still BSOD's or not.

Let me know how it goes ^_^.

Read other 3 answers
RELEVANCY SCORE 121.6

Hello

I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook.
It always come up after I put the computer in sleep mode.

After dozen of search and websites, I found this forum.

I hope you will be able to help me.

Please find below the informations about my OS
- Windows 7 Home Premium Edition
- x64
- OEM
- age of the system : 3 years old. The hard drive has been replaced 1 year ago.
- age of OS installation : 2 days old (reinstalled from the recovery disk)

I have also attached the System Health Report AND the BSOD Dump & System File Collection report.

Let me know if you need something else... and Thank already !

A:BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)

Please install any Windows Updates you have not yet installed. I notice you do not have Service Pack 1 installed yet.Update to Service Pack 1 (SP1)Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site




Crashes indicate USB device issues.Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained t... Read more

Read other 1 answers
RELEVANCY SCORE 120.4

Hello all

This is my first post in here. Please bear over with my English – it is not my native language.

My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
SILVERSTONE Grandia 04
DeZen PSU 500 Watt, TitanPower, 17-19 db
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x4 GB Corsair Vengeance ram (just bought new ones to see if it would help)
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB

My previous setup was with a AMD 240e but I have made a clean install.

I use Microsoft Security Essentials for antivirus and have firewall turned on.

The Media Centre machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings.
Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wakeup is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity.

I have made several new install and tried to exclude the SSD and install a 32 bit Win7 – but the BSOD still occurs 4-5 min after awake.

I have updated all drivers and tried to run Verifier with no luck.

Hopefully someone can help

A:BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I have updated the Perfmon details - I had forgot to run the Windows Experience Index

Read other 9 answers
RELEVANCY SCORE 112.8

I've been trying to troubleshoot a BSOD I've been getting after my machine wakes up from sleep. Typically it takes 30-60 seconds after waking up. It's a DRIVER_POWER_STATE_FAILURE which appears to be common in these situations but unfortunately, I can't seem to find the information I need to identify the driver causing the issue. Hopefully, I've attached what is needed to analyze the crash. Only the most latest few dumps are relevant. Any help would be greatly appreciated.

A:BSOD: Driver Power State Failure After Waking

I may have identified the culprit. MSI includes a piece of software with their MB that makes it easier to reboot into the BIOS after Fast Boot is enabled. I uninstalled this software and also disabled Fast Boot in the bios. I haven't had a BSOD since. Hopefully, that was it. It has only been a day since I discovered the issue so I'm not 100% convinced but so far so good.

Read other 4 answers
RELEVANCY SCORE 112

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 105.2

My Toshiba laptop gives the above BSOD screen 9 out of 10 times when going to sleep. I have installed the latest Win 8 video drivers but that was no help.

I have attached a couple of the minidump files.

A:Driver, power, state, failure when laptop goes to sleep.

Hi,

Bit of a messy machine there. First thing is first. Update or uninstall your sptd.sys. The installer/uninstaller does either:

DuplexSecure - Downloads

----------

Update Synaptics Touchpad driver:


Code:
SynTP SynTP.sys Mon Aug 17 14:35:16 2009


----------

Update J-Micron Storage driver:


Code:
jmcr jmcr.sys Mon Jul 20 07:39:02 2009


JMicron/Home

-----------

Update from the manufacturer:


Code:
tosrfec tosrfec.sys Mon Jun 01 02:58:53 2009
tosrfcom tosrfcom.sys Tue Jul 28 06:18:20 2009
tosporte tosporte.sys Tue Jun 16 06:48:47 2009
Thpevm Thpevm.SYS Mon Jun 29 04:15:37 2009
thpdrv thpdrv.sys Sun Jun 28 22:02:56 2009


----------

Uninstall ESET. Windows 8 already has excellent a/v protection as a service.


Code:
epfw epfw.sys Tue Jun 28 03:30:10 2011
eamonm eamonm.sys Tue Aug 02 05:33:29 2011


----------

Uninstall ancient Acronis:


Code:
tifsfilt tifsfilt.sys Wed Aug 29 08:37:29 2007
timntr timntr.sys Wed Aug 29 08:38:23 2007


-----------

Update from manufacturer:


Code:
pgeffect pgeffect.sys Mon Jun 22 05:00:11 2009


---------

Visit Intel to let it scan to update storage drivers:


Code:
iaStor iaStor.sys Thu Jun 04 21:53:40 2009


---------

Update Realtek HD Audio:


Code:
RTKVHD64 RTKVHD64.sys Tue Jul 28 09:00:05 2009


Realtek

-------
Others needing update:


Code:
tdcmdpst tdcmdpst.sys Thu Jul 30 04:39:35 2009
TVALZ_O TVALZ_O.SYS Mon Jul ... Read more

Read other 3 answers
RELEVANCY SCORE 105.2

Hi,
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.

My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.

Help!

A:Driver Power State Failure on wake from sleep

Which hardware diagnostics have you done?

Please run Driver Verifier according to these instructions: Driver Verifier Settings

Just a guess at this point, but try removing Diskeeper to see if that helps.
If not that, then try removing the Citrix software to see if it helps.

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Oct 11 09:56:37.534 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101113-15578-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 20:21:57.335
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 9F, {3, fffffa80036b7890, fffff800c68d07f0, fffffa800de92610}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80036b7890, Physical Device Object of the stack
Arg3: fffff800c68d07f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800de92610, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_ACPI_ANALYSIS_INCONCLUSIVE
CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"
MaxSpeed: 1700
CurrentSpeed: 1696
BIOS Version GDETA1WW (1.61 )
BIOS Release Date 09/14/2013
Manufacturer LENOVO... Read more

Read other 1 answers
RELEVANCY SCORE 105.2

Been having issues with sleep mode with my build for months but in the past couple weeks it has gotten worse. When the computer goes into sleep, there's about a 50 percent chance it will wake up when I move the mouse. The other times I have to hard restart. In the past week it is now BSODing and giving me the attached dump reports. I'm pretty sure it's a driver issue but I can't narrow it down any more than that. Interested to hear what the experts think.

A:BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Hi slash196.

Update the driver to TP-LINK 150Mbps Wireless Lite N Adapter from Download - Welcome to TP-LINK, by matching with your device number.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, if possible, update the BIOS to Version 1501 from ASUSTeK Computer Inc. -Support- Drivers and Download M4A88TD-M/USB3

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a9e060, fffff80000b9c518, fffffa800a2fb920}

Probably caused by : ntkrnlmp

Followup: MachineOwner
------------------------------------------------------------------------------------------
Dispatch routines:
[00] IRP_MJ_CREATE fffff880016e7c30 ndis!ndisCreateIrpHandler
[01] IRP_MJ_CREATE_NAMED_PIPE fffff8800177e490 ndis!ndisDummyIrp... Read more

Read other 1 answers
RELEVANCY SCORE 105.2

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

A:BSOD after going to sleep, driver power state failure

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

Code:
>[ 16, 2] 0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007049c50

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`06d15000 fffff880`06d7f000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:34:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ RAM - Test with Memtest86+
→ Guide to using Memtest86+ - Geeks to Go Forums

Read other 9 answers
RELEVANCY SCORE 104

Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software

Laptop starts up and can shuts down with out any problem.
If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.

All drivers have been update using driver dating utility by WinZip.

Dump files & system health check report is attached.

Will appreciate any help or suggestion in resolving this issue.

Thank you.

A:Power State Driver Failure on putting PC to Sleep or Hibernation

Two issues

1-Virtally all of these were sysRelated to NETwNv64.sys Wireless WiFi Link Driver from Intel Corporation causing pci.sys to crash. I would re-install with newest driver available.
2-Your Symantec. I would remove and replace with Microsoft Security Essentials.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 104

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 103.2

Hi,

Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.

Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.

This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.

Many thanks in advance,

Hob

A:Driver Power State Failure on Sleep, Hibernate, Restart or Shutdown

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.
ONLY install the drivers from your manufacturer!

Please remove your VPN software.

Code:
*** WARNING: Unable to verify timestamp for tap0901.sys
*** ERROR: Module load completed but symbols could not be loaded for tap0901.sys

Read other 0 answers
RELEVANCY SCORE 103.2

I am getting a BSOD mostly when I turn the computer on from sleep mode during sleep wifi will be on and most probably 1 of the browsers would have been working.

Reinstalled Windows 7 on Oct 8 and downloaded some drivers from the net.

I have uploaded the SF diagnostic zip file

Any help would be greatly appreciated

A:BSOD after turning computer on from sleep DRIVER POWER STATE FAILURE

Welcome aboard. Is there any reason that you haven't installed service pack 1?

Read other 9 answers
RELEVANCY SCORE 102

i guess i've been having this problem for about a month or so now and it's really becoming frustrating because everytime i have to leave my computer i have to shut it down if i don't want a BSOD..

i hope that someone can help me... every time i try to hibernate my laptop which is a HP DV4 Windows 7 Laptop i get a blue screen of death. it only started happening recently....maybe after i installed bit-defender..i'm not really sure..but it was doing fine before bit defender......

i used blue-screen view and with each time it registers a error it's with the driver for the NTOSKRNL.exe... i really hope that someone could help me because i just want my computer to go back to normal....and i wish that the problem has nothing to do with bit-defender......

tell me what you need and i'll try my best to get it to you so you can assist me with this problem cause i'm kinda new to the whole forum thing....

thanks..

A:[SOLVED] BSOD Driver Power State Failure When Hibernating/Sleep Windows 7 HP DV4

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html

Read other 17 answers
RELEVANCY SCORE 101.2

my laptop takes 20 to 30 minutes to shut down and comes up with driver power state failure message...i hope you can open the files i attached, was not sure on how to save those files...

A:driver power state failure - user-mode dump

Hi -

Your zip files contained a 2.3 MB user mode dump; not a post-mortem BSOD mini kernel dump.

However, I was able to obtain info that I believe points to your problem. It listed a 0xc0000005 exception = memory access violation.

Code:
Unable to load image C:\WINDOWS\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.6195_none_cbf5e994470a1a8f\mfc80u.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfc80u.dll
*** ERROR: Module load completed but symbols could not be loaded for mfc80u.dll
*** WARNING: Unable to verify timestamp for nspmain.exe
*** ERROR: Module load completed but symbols could not be loaded for nspmain.exe
*** ERROR: Symbol file could not be found. Defaulted to export symbols for msvcr80.dll -
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspavpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspavpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspavpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspfwpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspfwpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspfwpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspclpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspclpi.dll
*** ERROR: Module load completed but symbols could not be loa... Read more

Read other 5 answers
RELEVANCY SCORE 97.2
A:driver power state failure' blue screen

Hi phant0m2012.

The BSODs are caused by TOSHIBA DIB7700 based TV tuner device.
(c:\windows\system32\drivers\dvb7700all.sys)

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa80063511f0 00000000 00000000-00000000
Unable to load image \SystemRoot\System32\Drivers\dvb7700all.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dvb7700all.sys
*** ERROR: Module load completed but symbols could not be loaded for dvb7700all.sys
\Driver\DVB7700ALL
Args: 00016600 00000001 00000004 00000005
[ 16, 2] 0 e1 fffffa8006370470 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00016600 00000001 00000004 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8006366010

Args: 00000000 00000000 00000000 00000000
The tuner is actually a YUAN DVB-T/Analog Hybried TV Tuner, but TOSHIBA OEM. And, Toshiba does not have any driver for that device that can work with Windows 7. Have a look here: Support :: Toshiba :: Computers, Laptops/Notebooks, Tablets, Televisions, DVD and Blu-Ray Players, Camcorders, Storage, Accessories, and more

Attachment 315524

In this situation, it will be the best for you to disable the device.

Read other 3 answers
RELEVANCY SCORE 97.2

Hi listen I know this is one you get all the time ...ok im running windows 7 ultimate 32bit and system has been running fine but lately I getting this blue screen with "Driver state power failure" then system reboots Ive removed programs I dont know what else to do also when doing my google homework a registry download kept coming up is that the answer usually those things are just to make money well thanks for any help please

Read other answers
RELEVANCY SCORE 97.2

I am getting a blue screen stating "Driver Power State Failure"
The following is what I get off a screen that pops up after the computer restarts:

Problem signature:
Problem Event Name: BlueScreen

OS Version: 6.0.6002.2.2.0.256.1

Locale ID: 1033

Additional information about the problem:

BCCode: 9f

BCP1: 0000000000000003

BCP2: FFFFFA8007559060

BCP3: FFFFFA8007554060

BCP4: FFFFFA800544F2E0

OS Version: 6_0_6002

Service Pack: 2_0

Product: 256_1

Files that help describe the problem:

C:\WINDOWS\Minidump\Mini110412-16.dmp

C:\Users\Jordan A Lampila\AppData\Local\Temp\WER-83039-0.sysdata.xml

C:\Users\Jordan A Lampila\AppData\Local\Temp\WER5B1A.tmp.version.txt

I can't view any of the mini dump files saved on my computer to get more info or involved files.
Can anyone help me and tell me what driver or hardware is causing problems.
This started after i got the first LCD display switched out back in May of 2012. It started within a couple months ago.

A:Driver power state failure - Blue Screen

Hi jlampila,

We can try few troubleshooting steps to isolate the issue between hardware/software:

To check if it is related to hardware, run the built-in diagnostics provided by the manufacturer on the computer to check if the hardware is working fine.

If diagnostics passes then it could be related to a driver problem.

You can configure the windows to ensure that minidump files are created, please follow the steps mentioned in the link: Dump Files - Configure Windows to Create on BSOD - Windows 7 Forums

With this information we can help: Blue Screen of Death (BSOD) Posting Instructions

Please post the results.

Read other 6 answers
RELEVANCY SCORE 97.2

Hi evryone   i hve hp laptop  :   HP Pavilion 15-n240tx : intel core i 7 4500 uRAM 8 GBHDD 1 TBNDIDIA GeForce GT 740 m i use Windows 8.1 64 bit when i install Last Drivers on my laptop and use 10 min laptop  i recives this error :   The Driver Power State Failure Blue Screen and system down  i Tired to change windows and install again it and drivers i tested all af version of VGA DRIVER on HP suport website i Know this problem Related to VGA Driver but i cant solve iti dont have this problem on win 7 or ubuntu - this problem just in win 8.1 PLZ Help me   tnx  

A:The Driver Power State Failure Blue Screen

any one cant help me ?

Read other 7 answers
RELEVANCY SCORE 97.2

Window Vista OS, IE is not responding and I cannot get Firefox to work either. Don' know what tags are.
 

A:Blue Screen Driver Power State Failure

Read other 12 answers
RELEVANCY SCORE 97.2

Hey Guys!

I Need some help, I'm getting a driver power failure followed by a blue screen of death almost everyday and 2-4 times. Last minidump file is attached, Thanks a lot for help.


Best regareds
Skhan

A:Blue Screen with DRIVER POWER STATE FAILURE

Hi Safyz and welcome to TSF.

Could you give us your full system specs so we can see what we are working with. If you are unsure what your specs are, download and run Speccy, then when it's generated the information (about 10 seconds) go File>Save Snapshot, and attach that .speccy file as well. (You will need to zip it to attach it here: Right click on it and select 'Send To'>'Compressed (zipped) Folder'.

Could you also tell us what PSU (Powers Supply Unit) you have and what wattage it is. To find this out, turn off the computer and open it up and look for a label on it. It should tell you the make and wattage there.

Also, next time you boot the machine can you:

Window Key+R and type msconfig and hit OK.
Under 'Services tab', tick 'Hide all Microsoft Services' and then uncheck the remaining programs and 'Apply'
Then under 'Startup tab' - Uncheck anything not Microsoft related then 'Apply' and OK

Could you also let me know if you have recently installed any new programs or hardware. What anti-virus are you running?

Read other 5 answers
RELEVANCY SCORE 97.2

Hello!

I just bought a new Toshiba laptop on Saturday and I'm already having a bit of a problem. I've searched this out on Google already and it seems most people have this occur in a different situation than I do.

Twice now, I've gotten this blue screen that says "Power Driver State Failure."

It's happened while I was online or today just while I was writing an essay for my college class.

I've made sure everything is updated but I'm pretty sure I shouldn't be having problems so soon.

Can anyone help me out?

Any suggestions would be really really appreciated.
 

Read other answers
RELEVANCY SCORE 97.2

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:Blue Screen DRIVER POWER STATE FAILURE

Hello regkia and welcome to TSF,

Please read the BSOD posting instruction thread.

http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers
RELEVANCY SCORE 97.2

win7 64
8 gigs ram



this error seems to happen randomly

i would be so thankful if you could take a look at this


thank you so much!

A:Blue Screen DRIVER POWER STATE FAILURE

Hi darnapkin,

You should have a look at the BSOD posting instructions, and run the applications listed there and get back to us with all that information.

Meanwhile I've looked through this specific one, error code is:


Code:
BugCheck 9F, {3, fffffa8009657060, fffff800044423d8, fffffa800a36ec60}
*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
The driver you're using:

Code:
asmtxhci.sys Wed Dec 08 10:14:06 2010 (4CFF5A6E)
Driver belongs to an USB hub, please update the drivers for this one at the manufactures website here.

Also please update this driver:

Code:
lirsgt.sys Sat Mar 06 19:53:01 2004 (404A2C1D)
Driver belongs to a CopyProtect application, manufacturers site found here. It's dated to 2004 which is way before Windows 7 was created. This shouldn't be used. Either uninstall it or update it.

As I said, if you need more information; I need you to run the applications from the BSOD posting instructions thread.

But you're welcome to try the other things I mentioned first.

Read other 1 answers
RELEVANCY SCORE 97.2

Received above error 0x0000009F(0x00000003,0x86c6f6b8,0x8486BAB0) first time_restart. Followed by physical memory dump and contact system admin, etc.

The Vista Toshiba Satellite A215-S4757 AMD Turion Dual Core 32bit will not startup - has dead keyboard as well although it seems to light up. Tried putting in restore disc but nothing. I considered dead and bought a new laptop - HP Windows 7. Didn't like Vista anyway! Want to know if there is any hope for repair (without costing a fortune!). I was downloading new BIOS when received a message indicating that I needed to be running as administrator (which I was). The download had not reached backup yet so old BIOS should have been untouched at that point. I could not continue so tried to back out. Then received above error and blue screen. I was hoping to fix keyboard problems and message on your site or a similiar site said new BIOS would fix problem. I took the problem laptop to the Geek Squad to copy files from the hard drive and it was in good condition.

Any help would be appreciated.

A:Blue screen - Driver Power state failure

Can you try attach the dump file for it:

Here's how you do it:
http://www.vistax64.com/crashes-debu...-analysis.html

Read other 3 answers
RELEVANCY SCORE 97.2

Hi
i am going crazy with the blue screen every day...
i could really use some help here.
here are the details :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 86A6D030
BCP3: 8078ADB0
BCP4: 85CC4008
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\111110-16910-01.dmp
C:\Windows\Temp\WER-29780-0.sysdata.xml

i also ran "blue screen view" :

111110-16910-01.dmp 11/11/2010 21:33:07 PM DRIVER_POWER_STATE_FAILURE 0x0000009f 0x00000003 0x86a6d030 0x8078adb0 0x85cc4008 ntkrnlpa.exe ntkrnlpa.exe+dcd10 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16539 (win7_gdr.100226-1909) 32-bit C:\Windows\Minidump\111110-16910-01.dmp 4 15 7600

halmacpi.dll halmacpi.dll+37ab 0x8301d000 0x83054000 0x00037000 0x4a5bbf07 7/13/2009 15:11:03 PM Microsoft? Windows? Operating System Hardware Abstraction Layer DLL 6.1.7600.16385 (win7_rtm.090713-1255) Microsoft Corporation C:\Windows\system32\halmacpi.dll
ntkrnlpa.exe ntkrnlpa.exe+4c65 0x82c0d000 0x8301d000 0x00410000 0x4b88cacf 2/26/2010 23:33:35 PM Microsoft? Windows? Operating System NT Kernel & System 6.1.7600.16539 (w... Read more

A:blue screen - driver state power failure

Hi -

Please run Driver Verifier - http://www.techsupportforum.com/f217...ed-473665.html

Provide system info/ files - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 6 answers
RELEVANCY SCORE 97.2

My laptop does not shut down completely when powered off. I got a blue screen indicating that there was a Driver Power State Failure. I've attached the dump files from the last two failures. Can someone help me out here?

A:Blue Screen - Driver Power State Failure

  
Quote: Originally Posted by jeffH


My laptop does not shut down completely when powered off. I got a blue screen indicating that there was a Driver Power State Failure. I've attached the dump files from the last two failures. Can someone help me out here?


Your storage controller (iastor) is causing memory corruption.

You should update its driver and download and run memtestx86, run it for 5 passes to test your memory

Let us know if you need help

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Dumps\050610-23727-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`03051000 PsLoadedModuleList = 0xfffff800`0328ee50
Debug session time: Thu May 6 13:08:54.983 2010 (GMT-4)
System Uptime: 0 days 8:20:22.918
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module l... Read more

Read other 7 answers
RELEVANCY SCORE 96.4

Hello,
After putting my computer into sleep mode last night, I was unable to get it to boot into windows this morning. When i pressed the power buttong, everything turn on and working (all fans are functional, gpu power led is on, all hard drives & cd drives are functional. But the problem is, the screen to my monitor is blank. I also noticed that my usb aren't working (mouse connection light isn't on). I tried a soft power off by holding down the power button but no luck. The system does not turn off no matter how long I hold it. The only way to turn it off is by pulling the power supply cord or turning the power supply switch off.

My pc build:

AMD FX-6300 3.5GHz Socket AM3+ 6 core processor
ASUS ENGTX 560 DCII OC/2DI/1GD5 Geforce GTX 560
ASUS M5A97 LE R2.0 Motherboard
COOLMAX ZU-700B 700W ATX 12V Power Supply
G.SKILL Ripjaws X Series 8GB (2x4GB) 240-pin DDR 3 SDRAM 2133 (PC3 17000)
Prolimatech PRO Panther 120mm CPU Cooler
NZXT Phantom PHAN-001RD case


THE PROBLEM: Computer turn on with everything running as usual, but shows blank screen on monitor. Cannot soft power off by pressing power button.

Things I tried:

Clear CMOS by removing battery and switching pins
Running with 1 4GB RAM instead of 2, move the ram around the slots & alternate which Ram is used.
Check my monitor by testing it with another computer
Tried pulling the PS plug and holding the computer power button for 1 min
Test the GPU with another computer & it runs fine
I tr... Read more

A:Windows 7 blank screen after sleep mode (unable to power off with power button)

Hello,

Is it possible that you can test with another compatible PSU? I would strongly suggest doing so.

Also try the following steps:
?Make sure that the (internal) speaker is connected to the motherboard
?Remove all memory and attempt to boot the PC
?You should get the no memory beep errors

If the Power Supply is in working order and no beeps are present then it can be indicative of a faulty motherboard.

For troubleshooting purposes it may be a good idea to remove the components from the case and bench test to rule out a short.

How to Bench Test / Troubleshoot Your System

Read other 7 answers
RELEVANCY SCORE 96.4

Really I don't know what is wrong with my PC.

All the time when windows boot, and after 5 min my desktop stopping working. And then coming up DRIVER POWER STATE FAILURE Blue Screen.

I created .ZIP folder by SF Debug Tool.

Can anyone tell me what is my trouble?

A:I got 100 time DRIVER POWER STATE FAILURE Blue Screen

Hi Toni1974 & Welcome to the forums ^_^,

Unfortunately, the file uploaded by you does not contain the Dump files for us to analyse. You would have to manually upload the Dump files. The Dump files are located at "C:\Windows\Minidumps". Please make sure that you ZIP the Dump files before uploading.

Let me know how it goes ^_^.

Read other 1 answers
RELEVANCY SCORE 96.4

? OS -Windows 7 x64-upgrade version
? What was original installed OS on system
Xp(x32)>Vista(x32)>Windows (x64) "clean installed"
? Age of system (hardware) 3 years
? Age of OS installation - a week(trying to resolve these issues)
? CPU AMD 4400
? Video Card NVIDIA 8800 GTX (new this summer,previous one REMed)
? MotherBoard A8N-SLI Deluxe
? Power Supply - Ocz modx stream-pro 700w(new this summer)
? My system is in a raid zero configuration with two 320 Gbytes hard drives

Over the past three weeks my computer has been acting strangely.
First symptom- I would find the computer turned off(in the sense that there is no signal coming to the screen).

Second symptom- For the most part randomly, the computer screen would fus out and get distorted rainbow pixelated image( like my desktop or anything else that was doing at the time). Things to note, this never happened during the bootup process nor login screen. But right after I typed my login name and password it would happen. Otherwise it during general usage.

Third symptom-Twice during a crashes it said the NVIDIA driver had recovered from kernel mode or something like that and it fixed the screen.

Fourth symptom- I got a blue screen of death stating "Driver Power State Failure 0x0000009f" The screen was also fuzzed on the blue screen. I woke up this morning to it.

Based on the symptoms I believe it's either a problem with the power supply or the graphics card. I've tried totally... Read more

A:[SOLVED] (Blue Screen )Driver Power State Failure

added AutoRuns.zip

Read other 17 answers
RELEVANCY SCORE 96.4

EDIT 20/01/13: Okay so I have left it a while to see if I still ran into problems and unfortunately I am.

I THINK it must have something to do with my wifi driver or something as this is how it goes:
- Connected to internet
- Suddenly lose connection
-Computer tells e no networks are available, nothing i do changes this
-Restart computer
-Sticks on restart loading circle
-Blue screen


For the last two days when restarting my laptop (Aspire V3-571G) it hangs on the restarting spinning circle and then crashes to a blue screen saying to search online for DRIVER POWER STATE FAILURE for more info.

On successful boot I am greeted with a message asking if I want to send the info to microsoft troubleshoot and that a .dmp file hasbeen created in my mindump folder.

I have honestly no idea what could be causing this.

Can anyone offer me any help? I would really appreciate it.

I have ran the tool provided and hopefully the .zip file will help shed some light on my problem.

A:Blue Screen on Restart ( DRIVER POWER STATE FAILURE)

Your mini-dumps seem to be pointing at the driver file: vwifibus.sys which is your Virtual WiFi bus driver:

Driver Reference Table

Please make sure you have all the Windows 8 Updates until you can install no more.

I have found a number of drivers you should update or un-install/remove if un-needed as these can also be the cause of your BSODs:

iaStor.sys - Intel Storage Drivers - Driver Reference Table
mwlPSDFilter.sys, mwlPSDVDisk.sys, mwlPSDNServ.sys - EgisTec Inc. Fingerprint Biometrics: Driver Reference Table
bScsiMSa.sys - Broadcom Memory Stick Driver: bscsimsa.sys - What is bscsimsa.sys ?
b57xdbd.sys - Broadcom xD Picture Card Bus Driver: b57xdbd.sys - What is b57xdbd.sys ?
b57xdmp.sys - Broadcom xD Picture Card Miniport Driver: b57xdmp.sys - What is b57xdmp.sys ?
ETD.sys - ELAN PS/2 Port Smart Pad: Driver Reference Table
UBHelper.sys - NTI CD &DVD-Maker or NTI Backup NOW! or NTI CD-Maker by NewTech Infosystems (usually in Acer Empowering Technology): Driver Reference Table
NTIDrvr.sys - NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology): Driver Reference Table
IntcDAud.sys - Intel Graphics Media Accelerator HD Driver: Driver Reference Table
TurboB.sys - Intel Turbo Boost Driver: Driver Reference Table

You might also want to make sure your Acer is fully updated to the Windows 8 64 bit drivers. This includes chipset/motherboard and others: http://global-download.acer.com/File...iveUpdater.exe

I've noticed that your BIO... Read more

Read other 6 answers
RELEVANCY SCORE 95.2

Hi Guys,

I own a Dell Vostro Laptop 1720 and I have been getting this Blue Screen randomly from whatever I may be doing. It says DRIVER STATE POWER FAILURE. My minidump is attached. Can someone help me to determine what could be causing the issue?

Thank you very much.
Nick

A:Blue Screen - DRIVER STATE POWER FAILURE Windows 7 Ultimate

Have been getting driver power state failure BSOD in windows 7 ultimate

? OS - Windows 7 ultimate
? x64
? original os from dell
? Laptop- less than 1 year old

Read other 3 answers
RELEVANCY SCORE 95.2

Please some one do help me . i am facing this problem for over 5 months. blue screen ERROR-power driver state failure 9f error all the sleep timing and al in reset mode only, My laptop configuration is I5 processor-2450M CPU .6.00GB RAM windows 7 OS -home premium 64 bit original. All the drivers are updated . i read the post in this forum and did memtest it run 11 hrs still 3 pass ly covered and no error.. but in the forum it mentioned to do till 7 is there any other way to find what is happening???? some one do help me

A:Power driver state failure -Blue Screen ERROR in DELL XPS i5.

Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 94.8

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

A:BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 94.8

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 94.4

hi,

ive been having a big headache on this blue screen issue. i notice that after updating the SP2 this blue-screen appears more often. first it was the bugcode usb error then the driver power state failure came.

here is prompt everytime it restarted

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 13321

Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 87731030
BCP3: 877E2548
BCP4: BD18E920
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini121209-01.dmpn
C:\Users\hp\AppData\Local\Temp\WER-71869-0.sysdata.xml
C:\Users\hp\AppData\Local\Temp\WER9AB8.tmp.version.txt

My laptop is HP Pavilion tx2150ee and my os is Microsoft Vista home premium.

Attached also are the minidump files so alteast someone can tell me what to do.....

Please help me......
 

A:Bugcode USB Errror and Driver Power State Failure Blue Screen Error

It's being caused by your fingerprint reader; you need to update or reinstall the drivers for those.

BugCheck 9F, {3, 86fb0030, 877016b0, 876658b8}

*** WARNING: Unable to verify timestamp for ATSwpDrv.sys
*** ERROR: Module load completed but symbols could not be loaded for ATSwpDrv.sys
Probably caused by : ATSwpDrv.sys
Click to expand...

I think this is what you want, but it might be better for you to check your specific model on HPs site.

http://h20000.www2.hp.com/bizsuppor...9063&swEnvOid=1098&swLang=8&taskId=135&mode=3
 

Read other 3 answers