Over 1 million tech questions and answers.

PS4 and stereo receiver turn on when I turn on my tv

Q: PS4 and stereo receiver turn on when I turn on my tv

Hi,

I have a Samsung UHD tv series 8, a Pioneer receiver and a PS4. The receiver is connected to the HDMI Arc port on the tv. When I turn on my tv in the tv the PS4 and the receiver also turn on, each time my wife is screaming about that in the morning and I want to find a solution to this problem... I don't want to have all those advices on when I turn on my tv. Thanks for your help.

Serge

Read other answers
RELEVANCY SCORE 200
Preferred Solution: PS4 and stereo receiver turn on when I turn on my tv

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 68

Here is my situation. I have 5.1 surround sound speakers connected to my pc. I decided it would be nice to be able to run the ps3 through the surround sound for blu-rays and gaming without having to buy a whole new surround sound system. The setup that I have now sounds great for stuff on my pc. However, my pc didn't have an optical audio input so I got a usb device with optical audio in. Here is the problem that I'm having. I can get the sound to play through the speakers using vlc but there is quite a bit of latency. I've looked into using asio4all to try and eliminate the latency problem but I can't find a program that will let me use asio while directly playing the sound from my optical audio input. I'm wondering if anyone knows a way to either eliminate the latency in vlc or a program that I could use to directly play the input either without lag or using asio to try and eliminate it. Anyone have any ideas?
 

A:Using PC as a stereo receiver

Hmmm, I would probably look for an audio card with a digital optical input and bypass the USB conversion.

Peace...
 

Read other 3 answers
RELEVANCY SCORE 66.8

Win 7 hooked with HDMI to STR-DG1000 audio receiver. Windows detects equipment and installs microsoft "High definition audio device" driver. Go to configure speakers and only two channel stereo is available. Tried installing soundcard drivers and video card drivers, but HDMI port defaults to Microsoft driver. Does this mean my soundcard doesn't allow anything but stereo over HDMI?

Read other answers
RELEVANCY SCORE 66.8

Does anyone know of a way to connect my laptop to my home receiver to play my downloaded music?
 

A:laptop to home stereo receiver

Hello tpo9595!

If I may suggest: I believe this question would get much better response in the Hardware Forum?

If you wish, you can clisk the report button at the top right of the post and request that it be moved.
 

Read other 2 answers
RELEVANCY SCORE 65.2

I just purchased the program called Cool Edit Pro, and wish to record my old records onto CD with my CD Burner. I am using an older Onkyo Stereo Receiver, and professional turntable, Polk Audio Speakers. However, I cannot correctly hook up the receiver to be able to record and play from Cool Edit. I hooked up the receiver on the EPS Main Connector with RCA Phono Plugs, but the RCA Plugs don't really fit into the Sound Card Ports on the back of my Compaq Presario. I also tried connecting to one of the tape ports on the receiver, didn't work at all. When connected to the EPS, I can pick up the radio tuner, it plays fine. But, it seems nothing is being read by my computer. Do I have the wrong connectors? What ports should I use? HELP! 8^)
Rhinestones
 

A:How can I connect a stereo receiver/Phono Player to my computer?

Read other 7 answers
RELEVANCY SCORE 64.4

I have a bit of a strange issue with my computer. Forgive me if I'm a little too descriptive, but I'm not sure which details are relevant and which are not for such a problem. First, the specs:

Model: eMachines T2984
Operating System: Windows XP Service Pack 2
Processor: Intel Celeron D Processor 340, 2.93 GHZ, 256K L2 Cache, 533 MHZ FSB
Power Supply Unit: Bestec Model: ATX-250-12E REV: P7
Motherboard: I can't tell, but it appears to be an Intel motherboard by the number of Intel labels on it
RAM: 512 MB DDR SD originally, added 1 GB a couple of months ago
Let me know if you need anything else...

Yesterday, I got home from shopping around 1PM, and I tried to start the computer. I pushed the power button, and nothing happened. I checked all of the cords, and they were all plugged in. Not knowing what else to do, I opened up the case to see if there was something obviously wrong. The only thing that I noticed (other than a bunch of dust) was that the power supply unit was still hot. I shut the computer down about 5 hours earlier after about 20 minutes of use, so it seemed strange that the power supply was still hot. I unplugged the computer just in case there was some sort of fire hazard.

At this point, I called a friend who suggested that the problem might be with the motherboard or the power supply unit.

A few hours later, I plugged it back in to try to get it to work. As soon as I plugged it in, the entire unit suddenly started "running" by itsel... Read more

A:Computer Doesn't Turn on, Fans and Some Lights Turn on Automatically

I would suspect that the Power Supply Unit (PSU) is going south. If you have a spare one laying around, install it and see if the problem goes away.
You can buy a new,better PSU from Newegg for about $40.00. I have used a Thermaltake 430 watt in one of my machines for some time now and it works well.
You will have to check the size of your PSU to be sure a new one will fit into the eMachine.
Here's the page with that PSU on it. It's the last one on the list.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010320058+50001379&name=Thermaltake
 

Read other 3 answers
RELEVANCY SCORE 64.4

Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...

A:How to turn on WiFi adapter from command line / How to turn on hotspot

  
Quote: Originally Posted by Anakunda


Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...


Ad-Hoc requires that you restart the session each time.

Connectify pro has an auto start option that does this but it's a paid version, connectify lite is free but I'm not sure if has auto start.

Download - Connectify

Read other 8 answers
RELEVANCY SCORE 63.6

Hi to all Eight forum.
I m here with a strange problem, it happens from yesterday, the problem is when I playing games on my Dell inspiron N4050 and then the main power where the charger pluged in is turn off (it is the most problem in my country that there is heavy short fall of power), the laptop is remain ON just for 2 or 3 seconds and then its suddenly OFF. its not happening before, why is that,? why is the laptop didn't get power from the battery.?
.
when not playing games. and the main power (electricity) is gone, then this problem is not occurred.
plz understand my problem and reply me.
sorry for my bad English.

A:Laptop suddenly turn off when main power turn off.

Could it be overheating protection?

Read other 16 answers
RELEVANCY SCORE 63.6

Hi All,
 
I am using Windows 8.1 and had to refresh my computer as I was experiencing some problems. Everything seemed to be normal so I started slowly installing the programs I had before. Now a few days after, I find that my wireless device is Off and Flight Mode is On. I have been in settings but the relevant switches are disabled.
Can anybody tell me how to fix this please ? I really don't know how it happened. Can it be that my laptop is still infected ?
 
Thanks,
Robert

A:Turn Off Flight Mode & Turn On Wireless Devices

Is there a physical switch on your laptop for wireless? Often on the edges of your laptop... easy to miss.

Read other 7 answers
RELEVANCY SCORE 63.6

This is driving me crazy. My HP has Windows 7 and everytime it connects to the internet (wireless connection) Windows Live Messenger opens down in the left hand corner taskbar near the start menu. I close it, and fifteen minutes later it will open again.
I opened the options and unchecked the boxes pretaining to 'Run Windows Live Messenger when windows starts' but it still repeatedly opens. I use hotmail, but i really have no use for Messenger. The program is not listed under add/remove programs. Someone please help me turn this thing off.
 

A:Solved: Windows Live Messenger-TURN IT OFF TURN IT OFF!

It should be listed in Programs & Features under Windows Live Messenger or Windows Live Essentials. If you still can't find it listed then go to get.live.com and re-download the installer, reinstall it, then uninstall it.
 

Read other 2 answers
RELEVANCY SCORE 63.6

Hi!
I have this issue that when I turn on my computer, the power LED does not turn on but you can hear the fans working properly. I don't the issue and I'm not much of an expert with computers. Please help me solve this issue because I'm completely clueless.
 

A:Try to turn on my computer but only the fans work and the power led does not turn on

How old is the computer, what was the last change you made to the computer and when you last shut it down did it shut down correctly?
 

Read other 3 answers
RELEVANCY SCORE 63.6

So I have already tried the solutions such as boot up the pc and press shift and such to get a menu and then download somthing on a usb and get into an administrator account.The Administration account I can at least log onto as it's not password protected but I still can't turn on Wi-Fi which basically defeats my whole purpose of using the computer as I use it for gaming. So regarding me not being able to log into my actual account, I've tried resetting my password multiple times without success. I think it's due to the fact that I am not able to connect to any Wi-Fi spots (which I assume is because of safe mode which I can't turn off for some reason) And that brings me to my next point, of I can't connect to Wi-Fi die to safe mode. I have tried to turn off safe mode in the settings but when I press the button for it to turn off it slides back over to the on side. Please let me know if you have any other solutions that I have not tried yet, Thanks !

Read other answers
RELEVANCY SCORE 63.6

I can't turn my computer on. The fans and lights turn on for a second and then turn off. a few seconds later they'll turn back on and then turn back off. I've had this computer for 4+ months now, i built it myself. it recently started doing this but i'd just turn off the PSU (Power Supply Unit) and turn it back on and it woould fix it. now it doesnt fix it anymore. i've re-slotted the RAM (Random Access Memory) and pushed it in firmly, but that hasn't done anything. i've tried different power outlets and pushed everything into the MOBO (Motherboard), i havent messed around with CPU (Processor) because that's just a pain in the a**... i was wondering if there was anything else i could do before having to take it into a local repair shop, lol.

as for my computer specs

CPU (Processor): Fx-6300 AMD
GPU: R9-270x AMD
RAM (Random Access Memory): 8GB Ballistix sport
MOBO (Motherboard): ASRock 970 Extreme3 R2.0
PSU (Power Supply Unit): Corsair X500 w 80+
Case: Rosewill GALAXY

thanks
 

A:Fans turn on, lights blink and then turn off/on repeatedly.

First, I would unplug everything that isn't necessary. Everything external except for the keyboard and monitor. Internally, just leave the CPU, RAM and video card installed. See if it turns on. If not, you might try and test the power button. Disconnect the power button from the mobo. If the pin headers allow for it, use the reset button as the power button. If not, you can use a flat head screwdriver to power on the computer (cross the two pins for the power button with the blade of the screwdriver). If you do this, just be very careful. Touch only the power button pins and nothing else! You could easily damage components by touching the screwdriver to the wrong thing.

Some motherboards have a power button right on the board that you can press to power on the computer. I looked at a pic of your board and didn't notice one.

If that doesn't do it, plug the power button back in. You might try and play around with the RAM. I don't know if you have 2 or 4 sticks of RAM, but try and boot the computer with only one stick of RAM at a time. If there's a bad stick, you'll find it through this process of elimination.

If none of the above works, then it might be a bad PSU.
 

Read other 1 answers
RELEVANCY SCORE 63.6

Hello Folks,

I'm not sure if my issue is with hardware (possibly MB?) or graphics card, so please forgive me if I've posted in the wrong section. The first problem I was having was random blue screens of death that displayed graphic card driver issues. I was able to remedy that by updating my graphic drivers and have not had an issue since.

However, ever since then I have been running into another hardware or graphics-related issue that is random and completely stumping me. What is happening is, I will be on my computer, leave and turn my monitor off, and (randomly) when I come back to use my computer again, when I turn on the monitor there is no signal and a black screen (e.g. when I turn my monitor on my desktop will pop up and the light on my monitor will turn blue, when it doesn't turn on there will be a black screen and the light on the monitor stays yellow as if it is idle). I have tried swapping out the monitor to see if that was the issue and the same problem persists, so it does not appear to be my monitor or VGA cables.

The only way I can temporarily fix this issue is to reboot/restart my computer and viola! The monitor works again and I can see everything. This issue is very random. Sometimes I can go weeks without an incident, other times this is happening a couple times a week. I honestly don't know if it's my motherboard or video card or what. My PC isn't overheating, I'm not overclocking, and all of my drivers are updated.

I'm not sure what... Read more

A:Turn Off Monitor, Turn On Later and Black Screen, PC Still Running

try checking your power options settings and set it to high performance then check in advanced power settings and do not allow hard disks to sleep

Read other 1 answers
RELEVANCY SCORE 63.6

Running Windows Vista Ultimate.

Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email.

Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working.

What do I need to do to prevent the display from turning off at odd intervals?

A:Vista Ultimate x64: turn off display, will not turn back on

sounds like your display drivers are crashing.

Do not rely on windows update drivers - go to graphics chipset manufacturer website and get latest drivers

Read other 6 answers
RELEVANCY SCORE 63.6

I just put together my first computer 6 months ago. It abruply shutdow in the middle of writing a paper for school. I couldn't turn it back on right away. after trying a few times, it turned on. All the fans are working even the fan on the power supply, the motherboards lights are on. My graphic card in on the motherboard. I think it might be my power supply because when I first put it together I didn't plug in the smaller power connection to the motherboard and the same thing is happening, black screen. It's like my computer isn't giving my monitor any feed. I will have more info when I get home. I can't get in to bios or safe mode.
 

Read other answers
RELEVANCY SCORE 63.6

Wife updated Norton twice and had two Norton Firewalls and Windows Firewalls running together. Paid twice for the 2 updates. Removed Norton Completely and then re-installed Norton 360 Security Version 5, but am still unable to turn off Windows Firewall under Windows XP Pro and also cannot turn on Automatic updates, getting message "we're Sorry, the Security Center could NOT change your Automatic Windows Update setting. To try changing these settings, go to SYSTEM in Control Panel. On the Automatic Updates Tab, select AUTOMATIC (recommended) and then click OK. None of this works, then tried using an app to reset Security Settings and that didn't work either. Any suggestions on what I try next. I would like to reinstall Norton 360 Internet Security Version 5, I know there are those out there that hate Norton and the overhead that comes with it, but over the years I've gotten used to it and I like it very much. Thank you, PhotoRay

A:In XP Pro can't turn off Windows Firewall or Turn on Automatic Updates

How did you remove Norton in the first place?

Read other 3 answers
RELEVANCY SCORE 63.6

Hello Microsoft team,
We need for an application to unplug and replug usb3 - not physically but with a program.
We checked a lot on the internet but did not find answer how to do it in windows 8.1 pro (in c++).
We know that hibernation creates something alike, but how can we only turn down the power of usb3 and return the power back on back via program (in c++).
Thank you for your help.

Read other answers
RELEVANCY SCORE 62.4

HI TO ALL:
im having a problem with my pc that i mostly used..heres the situation :
my pc is working fine suddenly 1 day it slows and slightly hanging so i restarted it after restart problem occurs it powers on(all running: fans,hdd,dvd rom,cpu fan)then after 2 seconds it goes off automatically.so then i open the case and reseated all components(i know some basic troubleshooting) i tried to power on again and same things happen turn off after 2 seconds. i remove the gpu and connect my monitor to the onboard, so it starts finally and get me to "loading windows "then it go black screen, i restart it again by pressing the restart button and i boot trough enable vga mode by pressing f8.then it boots and it loads the windows and i can use it normally only on vga mode..so i downloaded the latest driver of my gpu's onboard and external.i uninstalled the drivers through vga mode then restart,again loading windows then black screen,restart againd and boot through vga mode install the updated drivers then reboot,loading windows then black screen with some pixelate flickering cursor on screen. (to make it short it only boots on enable vga mode..then i go replacing my psu with working from another pc and same thing happened..so then i reformat my pc and didnt installed any gpu including the onboard i disabled it..and its working fine with that..

note* with my external gpu installed it goes off after 2 seconds it power on.
with my onboard gpu enabled it gives black screen ... Read more

A:Pc turn on and immediately turn off after 2 seconds(with external gpu)

Read other 10 answers
RELEVANCY SCORE 62.4

I want to discontinue use of McAfee (which came with the initial install) of my Windows 10 computer, and turn on Windows Defender.   I don't know where to start.

A:turn off mcafee and turn on defender in windows 10

Open the start menu. Select  "Control Panel". Select "Programs and Features". Find and select the McAfee program in the list then click "uninstall" at the top of the list. When it has finished uninstalling Windows Defender will activate itself.Go back to Control Panel again and select  "Security and Maintenance" . In the security drop down list it should say Windows Defender is turned on.

Read other 3 answers
RELEVANCY SCORE 62.4

Immediately, I use Thinkpad Yoga 260 and now have a problem when it is turned off, then the next day my laptop turns on it doesn't want to turn on again. I pressed the power button, it just turned on the keyboard light for a while then died without having time to enter bios especially into Windows (the screen didn't have time to turn on). All indicator lights are on. Some of what I did;1. Press the reset button. This once managed to make my laptop turn on again, but then it had no effect.2. Also i update all software and Bios, but still forced same problem, then,3. I disassemble the laptop, pull out some connectors such as batteries, keyboards, and more. Some of these steps succeeded, until finally the problem arose and I went to the laptop service in my city.4. There was a slight problem with the supply of electric current on the motherboard and it was successfully fixed and my laptop turned on again. However, after one day the problem reappeared after the laptop was turned off. Luckily, my service place provides a one-month guarantee. But, I have returned to the service area with the same problem (more than 5 times). According to them, my motherboard has no problems, as well as other hardware. I still don't get the cause with this problem often arises. Sometimes a laptop can turn on only by pressing the reset button or opening the battery connector or plugging in the power cord and then I wait a while while the laptop is charging, and ... my laptop is back on... Read more

Read other answers
RELEVANCY SCORE 62.4

Good day!

My cousin asked me to troubleshoot the problem of his desktop. He was telling me that it is not turning on. I was caught by surprise when i turned on the PC when suddenly I heard some kind of explosion. It sounds like a blown capacitor or something to that effect. I immediately unplug the power cord from the wall outlet. I checked all the capacitors and looking for any damage and fortunately it's all ok. I smell the PSU to check if there's any short circuit occured and there was no foul odor or something. I removed the PSU from the casing for and opened it for inspection. I found out that the fuse exploded and broke into 2 pieces. I don't bother to repair it but instead I bought a new 700 watts PSU.

After replacing the PSU I turned on the PC but i found out that the CPU fan will spin for half a second and turn off. Led green light is on but no post or beep sound. I did some troubleshooting and these are as follows:

1. I removed the motherboard from the casing and put it on top of the table with cardboard underneath.
2. Clean the RAM stick and tried on other slot.
3. Clean CPU heatsink and fan since it was clogged by dirt and replace thermal paste.
4. Replaced the CMOS battery and move jumper pin 1-2 to 2-3 for about 2 minutes.
5. I turn on the PC without the video card, hardisk and keyboard.

SPECS:
Motherboard: asus h81m-c
CPU: Intel core I7
RAM: 8gb

Btw, prior to the above steps, right after replacing PSU I just clean the RAM and turn it on but ... Read more

Read other answers
RELEVANCY SCORE 62.4

I use Word
I press CTRL H to replace text everywhere
I input my text and search
And then press Alt + A - this is meant to select 'Replace All'

I've been doing it for years
Always used to work

Now...
All works 70% of the time
30% of the time... Sniper tool turns up thinking I want to take a screenshot
It winds me up.

How do I turn off and on?
AND... why and how does it turn on by itself?
I mean I don't turn on intentionally

Thanks.
 

Read other answers
RELEVANCY SCORE 62.4

If I unset "Allow the computer to turn off this device to save power" on the Power Management tab of my USB Root Hub properties, then when I attempt to restart my computer from the Start Menu, Windows shuts down but the computer itself keeps running,
i.e. the power light stays lit and the fan continues to run. In order to actually shutdown, I have to press the power button for a few seconds. Upon reboot, there is no indication of a failed shutdown from Windows. However, I am able to shutdown from the Start
Menu without problem.
Is this really the intent of not allowing the computer to turn off a device connected to a USB port, i.e. you can shutdown but you can't restart? Seems a bit arbitrary to me.
Windows 7 Home Premium 64-bit Service Pack 1
Acer Aspire 5560
AMD A6-3420M APU with Radeon HD Graphics 1.50 GHz
8.00 GB
All device drivers and the BIOS are up-to-date.

Read other answers
RELEVANCY SCORE 60.4

In the last couple of months we have begun seeing some of our secure sites failing in IE. Many will work in Chrome or in Firefox, as a business standard we prefer IE.  The SSL is off by GPO. TLS 1.1 and 1.2 are on (TLS 1.0 is off for a reason-but
had this problem even before the change.) Have turned off and back on by GPO and still have issue.  We do not want to turn back the clock and use SSL (nor would our auditors permit it). Any suggestions?

Rebecca Palmer

Read other answers
RELEVANCY SCORE 60.4

If I turn the laptop off and back on again, like next morning etc the dongle doesn't connect to the internet, but if i then restart it, the dongle connects.

Why is this? anything else I can do?

Read other answers
RELEVANCY SCORE 60.4

Hello  i am writing my  mother laptop for some reason it acting very odd brand new not even few months old  Ok yesterday her laptop she could shut it down with no problem this morning she going out she turn it off bout close it.. but it decided turn back on not going thru booting it up with hp Icon no went straight away to windows 10 automaticaly.  So i decided to check some program see if anything conflicting it nothing  so i decided to shut it down thru windows 10  power shutdown but still turn back on..  i shut down it with power button but even still turn back on please help me   

Read other answers
RELEVANCY SCORE 60.4

why my hp x360 turn off  without warning and turn on again it turn off without warning and them turn on again?

Read other answers
RELEVANCY SCORE 60.4

I am using a client computer that is connected to a modem via a LAN cable which is in a neighboring house as far as about 50 meters. The host computer is there. The host computer is only using Internet Connection Sharing (without a router) to share its Internet connection with me. Within this network there are only two computers, the one I use (as client) in my house and the other one is the host computer as I mentioned earlier.

How do I know that the host computer is being turned on or off?

The purpose is to know so that I can use all the bandwidth from the modem when the host computer is not turn on. Because there are no restrictions on bandwidth from the host computer, and I just wanted to use all the available bandwidth only when the host computer is not turned on.

Both computers use Windows 7.

Read other answers
RELEVANCY SCORE 60.4

Hello everyone, I have an HP Envy j100t which I purchased in 2014. ever since yesterday it's been starting but the screen remains pitch black, no display at all. It won't get to start up page, just remains a blank dark screen even though the power light is on and there's no battery issue because it was on charge all night and the AC adopter is still in.   I keep on having to get to get to the BIOS recovery screen, letting that update, and then it proceeds to restart. However when it restarts, it never gets to start up and there is the same dark screen- no display.  I have to always update BIOS, take out the battery and AC adapter, put them back in, and then it will start. Or sometimes even that whole process might not restart it.  Please help!

Read other answers
RELEVANCY SCORE 60.4

Hi everyone,i have a trouble with my laptop, it auto turn off, then I cannot turn on, I have to wait around 15mins, then try to press turn on, so the laptop can start, but it only on around 45mins, then off again, I don't know what wrong with that, even I tried to hard reset it 

Read other answers
RELEVANCY SCORE 60.4

Hey all I'm new to this forum but I've built a few computers in the past but have never experienced any problems like this.

Case: Powerspec Cooler master case
Processor: Intel i5 750(quad core)
Motherboard: Gigabyte H55M-UD2H
Powersupply:OCZ 500 watt Mod X Stream-Pro

Here are some pictures of my build and a video of what is going on.

Video: youtube.com/watch?v=UbuFZJQnlds

As you can see the PSU, CPU, and Case fans are turning on and the Motherboard LED lights are blinking and then they quickly turn off. I dont think its a problem with the Power Supply because I have already returned one with the same issue thinking it was defective.

Pictures:

wont let me post pictures =/

Any help is appreciated, thanks for your time!
 

A:CPU and PSU fans turn on but then quickly turn off as does everything else

Does your current BIOS version support your CPU?

Your 4 pin power connector looks to be missing.... Top right of the video 8secs in.
 

Read other 14 answers
RELEVANCY SCORE 60.4

 I got hp z600 and i got geforce gtx 1070, I bought a power adapter 6 pin to 8 pin. I have the issue the PC will turn on and works fine but when i power it off and want to turn it on again it wont turn on at all. I have to unplug it and hold the reset button for few seconds then I plug it back again and it turns on. No it seems it is dead 100%. What can it be? too much power consumption from the video card? I got other hp z600 with gtx 1050 no external power required and it works great. Any suggestion? Thanks

Read other answers
RELEVANCY SCORE 60.4

My HP pavilion refused to turn on in the morning after charged last night. The charging indicator light used came up at first but now nothing is working. I used working chargers and batteries from HP pavilion, still nothing. I removed the battery push the power button for a minute the fix the battery and on. Nothing. I used ram from other pavilion, still nothing. Please I need your help

Read other answers
RELEVANCY SCORE 60.4

after serching all night to find out why his computer is in limbo, i leave my brother's house without finding needed help. his computer won't turn off...the fan, a couple little lights until he unplugs it from the wall. first, the computer did a restart all by itself, he said, then it would not turn on, except the fan and little lights inside that won't turn off. he took out the hard drive and it functions in his other computer...he puts the hard drive back into the new computer and it will not turn on or completely turn off that fan. he tried the "hold the on/off button for at least five seconds" step and nothing changes. he has had the computer for a year and a half, so he really wants to figure this out. how can he even get it to turn on so he could do a safe start up? so far we cannot find a way to troubleshoot. he have checked the cords, perhaps there was a freeze up that began this loop and that's why the fan stays on? please say this is something you have heard of and there may be a solution. the advice we have found usually goes back to buying a new computer. thanks in advance, tea
 

A:what's a girl to do when her computer won't turn off, or turn on?

Welcome to TechSpot

I'd unplug all drives and add-on cards (such as soundcard if there is one), and try booting then.
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hello i've Toshiba C55-B5302 when i try to turn on and then turn off again. You can turn on the laptop as normal. The LED lights on the laptop light up, but once this is done, the laptop just runs for 5 seconds and it automatically shuts off again. You can hear the fan run for a while but other that it just turns off. So what is the cause for a problem like this? i've dissasemly it and clean the fan there's no dust, i've remove the battery and keep the power button for 60sec read it on other forum, press many times the power button without the battery and the charger to reset the bios info, but without any luck.
Cheers

Read other answers
RELEVANCY SCORE 58.4

This just started happening. My T420s won't turn on using ON button -- it blinks a bit but nothing happens -- but it will turn on if I push and hold down the down-arrow button. The only problem is I have to keep holding the down-arrow button down. As soon as I lift off the down-arrow button it crashes. Wierd I know. Any ideas? I mainly want to use this laptop in the expansion tray with an external monitor so I am thinking of trying to put a pad on the down arrow button that a closed top will hold down but this is a bit of a kluge...

A:T420s won't turn on using ON button but will turn on if I push and hold down arrow button

OK ... first I gotta know .... what made you try holding down the down-arrow key?    Does the T420s have the "paper clip reset" hole on the bottom? This is the procedure for an X1:  https://is.wfu.edu/help-articles/hard-reset-for-lenovo-x1-carbon/ My T440s and T480 both have the hole....the hole is not in the same place on all the machines of course, but you get the idea.Or maybe you already tried this trick?  

Read other 1 answers
RELEVANCY SCORE 57.6

Windows Vista Home Premium, How can I turn off group policy, If I try to run defender or change startup programs, it will not allow me. Message to contact your system administrator to turn off group policy.  Please help

Read other answers
RELEVANCY SCORE 56.8

Dell Dimension 4100 PIII 866 MHz, XP Pro, NViIDIA GeForce MX 440

This is my problem: I have the power saving settings set to turn off my monitor after 20 min. It does briefly turn off, only to turn on again 1 sec. later, displaying a faint very dark blue screen... It used turn off fine, but after upgrading from Windows 98SE to XP Pro I got this problem. Is this the OS or my video card?

Any clues?

Thanks all
 

A:"Turn monitor off" setting doesn't really turn off

Did you upgrade to XP right over the top of 98 or was it a clean install? If you did an upgrade over the top of 98 (and I know you don't want to hear this lol) then you should format and do a clean install. Upgrades rarely leave you with a stable system.

Things to try before you do that though:

1) Make sure your video card drivers are up to date.

2) Make sure Windows is updated - go to windowsupdate

3) try the system file checker (Start, Run, "sfc /scannow" [without the quotes]) to make sure your system files are intact.

Other than that I would say just do a format and install XP from scratch (to be honest, you should do this anyway if you haven't already, you'll get much better stability and performance).

Prime
 

Read other 2 answers
RELEVANCY SCORE 56.8

Hi,

I've set Turn off the display setting in my power plan to 15 minutes and my monitor does turn off after that period (sometimes it doesn't!), but then, sometimes, it turns ON by itself after few minutes.

I've been Google-ing these days trying to find some solution and I came across suggestions which recommends that Allow this device to wake the computer option, located in the Power management tab, in the Properties window of the network adapter, in the Device manager, should be disabled. Also, there were suggestions that Wake on Magic packet property in the Advanced tab should be disabled, too. Unfortunately, all that did not work in my case.

Does somebody know what can cause this problem? Has anyone ever encountered such phenomena?

Thanks in advance.

A:Monitor turn on by itself after "Turn off the display" starts

Hello alokin87 & welcome to Sevenforums,

Sometimes the computer Wake from standby because of a program's updating itself. Sometimes it does wake, sometimes it does not!

Therefore it could be the Windows Media center as explained in this Hotfix from MS. You could give a try:

http://www.sevenforums.com/windows-u...ly-2010-a.html

Look at post #1:

"-Do you find that your Windows 7 Computer wakes up from sleep unexpectedly at a particular time every day? If so then you might to check up if any scheduled tasks are waking your PC up."

Read other 8 answers
RELEVANCY SCORE 56.8

How to turn windows firewall off? I can't click the Turn Windows Firewall On or Off

A:How to turn windows firewall off? I can't click the Turn Windows Firew

This may have been disabled on your computer, particularly if you are in a Domain (e.g.: at work, in a library, etc).

However assuming that you have Administrator rights to your computer you should be able to turn it on and off by going to Start > Control Panel > Windows Firewall > Turn Windows Firewall on or off.

If you cannot turn the Firewall off through the above approach try the following Start > Control Panel > Administrative Tools > Services

Looks for the 'Windows Firewall' Service, double click it, then click on 'Stop'.

From within the Service properties you can also stop the Firewall from starting with Windows, etc.

Read other 2 answers
RELEVANCY SCORE 56.8

Laptop: Sager NP9150
Receiver: Sony STR-K850P
Audio: Realtek HD
Connection: SPD/F Optical Cabe
Listening mode: AFD Auto - runs everything as 2.1

Issue: when I know I'm utilizing a 5.1 source, the receiver only auto-detects 5.1 sound from DVD movies. Sources such as Netflix streaming and Steam games do not detect as 5.1.

I've run a few tests and for Netflix, I think the answer is as simple as selecting whatever Dolby flavor I think is applicable (Dolby ProLogic I or II, etc.) That seems to work fine.

For games, I'm less certain. I've read that games do not send 5.1 audio over SPD/F optical. The tests that I've run seem to indicate that in games, when I force a Dolby format with the receiver, it just sends the audio to all the speakers. In movies (DVD or netflix) I can (I think) tell that the individual speakers seem to be doing different things.

So, anyway - I apologize if this is all very confusing.

One thing I've hit on, is that I can use a hacked Realtek HD driver that allows me to force Dolby Digital Live. What is that? How does it work? Right now, it just seems to be muddying the waters.

A:5.1 Sound - PC Processing vs. Stereo Receiver Processing

What is your windows sound playback settings set for the output? Is it set to 5.1 under configure speakers?

Read other 9 answers
RELEVANCY SCORE 55.6

HiI have a problem, my x240 wont turn on.I disconnect battery, hold 60 second power button, and then laptop start.Then I select "Power Off computer" in windows, my laptop turn off and i can't start after that. I push power button, but nothing happend. Then i disconnct battery, hold 60 seconds... and it start...What happend? Thanks

A:X240 won't turn on after turn off

Hi @Fedor_Alabiev!
 
Welcome to Lenovo Community Forums.
 
If the computer stops responding and you cannot turn it off by pressing the power button, remove the ac power adapter and insert a straightened paper clip into the emergency-reset hole to reset the computer.

 
Hope this helps.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 55.6

Have a computer that apparently has a browser hijacker and to repair they say to turn off the iexplorer Process through Task Manager, so how do you restart it?

A:Turn off and turn on iexplorer

Run, iexplorer.exe

Read other 3 answers
RELEVANCY SCORE 55.6

I left my computer (tower) on for a couple of hours whilst I wasn't in the room. When I returned it had switched itself off, and there was a slight burnt out smell coming from it.
It now will not turn on

Have changed the power lead- still won't turn on

Any ideas??

A:Computers turn itself off, now won't turn on...help!

Replace your power supply then proceed to continue troubleshooting elsewhere.

Read other 7 answers
RELEVANCY SCORE 55.6

Just got a new to me P3 computer up and running. Sometimes during star up it does not recognize the PS2 keyboard. Which makes it hard to go into my password protected User ID. When trying to shut down it will keep a few things running like some fans and the CD drive. But it does not sound like the Hard Drive is spinning.

If I use the XP to shutdown it goes into this limbo stage of neither off nor on, same goes for the power button on the front of the computer. It will either start up the computer or turn it to the limbo mode. Upon starting up, I can use the mouse to get it all the way into a non password protected XP users screen but can't do anything without the keyboard working. In the process of setting up I have had everything working earlier today but this keyboard and limbo status has been an intermitent problem. What should I try?
Thanks
 

Read other answers