Over 1 million tech questions and answers.

Enable touch screen for Lenovo X41 tablet

Q: Enable touch screen for Lenovo X41 tablet

Windows XP Tablet Edition had to be removed from my Lenovo ThinkPad X41 tablet because the PC was issued for school, and the school-licensed software had to be removed. Now I'm running Windows XP Pro (a mistake on the school technical administrator's part?), and the touch screen no longer responds to the stylus.
I tried to contact the school technical administrator, calling to his attention that I'm no longer running Tablet Edition, which is probably necessary, but he has not responded.
I've tried installing such drivers as 7jge15ww and 913z07us, and I've run the ThinkVantage System Update several times, to no avail. Is there a driver I'm overlooking? Is it at all possible to simply USE my tablet properly without having to go out and buy Windows XP Tablet Edition?

RELEVANCY SCORE 200
Preferred Solution: Enable touch screen for Lenovo X41 tablet

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Enable touch screen for Lenovo X41 tablet

You can get Recovery Discs from IBM is the built in Recovery partition and utility are not longer on the laptop from IBM/Lenovo by going here: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4M7HWZ

If the Recovery Partition is still intact and accessible you can return to Windows XP Tablet Edition by following these instructions: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4UFUYK

Looking at the downloads I don't see a driver for the Touch Screen: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67100
When you ran the System Update utility you installed all the drivers and software/accessories updates?

Read other 1 answers
RELEVANCY SCORE 84

hi all im new on this, need some help have a thinkpad tablet gen2 has been updated to win10 nou the touch screen does not work, if you touch the windows tab under the screen that works but that is all. 

Read other answers
RELEVANCY SCORE 76.8

I have a requirement to use speech dictation along with touch keyboard for a windows 10 tablet application. Currently I am not able to find the microphone on the touch keyboard.  How can we enable microphone on windows 10 laptop touch keyboards (as
in ipads and android tabs).
Thanks in advance

Read other answers
RELEVANCY SCORE 70.4

Hi, I have since some years a B50-30 AIO (non touch); in the back there are two HDMI ports: in and out.The port OUT is regularly working while I'm not able to use the HDMI in.  When I plug my laptop to that port, he sees an external monitor but I'm not able on the lenovo desktop to switch the desktop to the external source.CXould it be tha even the port is present with hdmi connector inside, it is not phisically activated ?Thanks.

Read other answers
RELEVANCY SCORE 70.4

I am trying to work on OBD2 bluetooth car dongles and, because of traditional Windows difficulties with phantom serial port retention, I needed to find a machine with little in the way of features that could confuse me by having many serial ports already in use. I also wanted to use Windows 10 to look at its enhanced features eg bluetooth in Microsoft Message Analyser. My old X200T looked ideal. It worked perfectly in W7 and provided pen and single touch, thus being ideal for working in the front seat of a vehicle. The update to W10 went well, and the pen works fine, but single touch does nothing. At one stage in thrashing about with drivers, I had it working on the touch calibration on-screen "targets", but it did nothing when I touched the on-screen touch pads. Even that has now stopped working. I think the problem may be related to the fact that Microsoft is telling me that it has Pen and Touch support with 2 Touch points. If I uninstall everything related to Wacom and reboot, Pen disappears, but Touch with 2 touch points always comes back. Has anyone else seen this and found a workaround?

Read other answers
RELEVANCY SCORE 66.8

My HP Pavilion 360 does not switch to tablet in some Roblox games, well to be clear it does pop up the switch to Tablet dialog and touch works but you don't get the touch on-screen controls for moving etc. so it's like somehow the game does not now know that it's a tablet  This is inconsistent as the tablet works in some Roblox games and not others. Has anyone else experienced this and if so how did you fix it? e.g The onscreen controls show and work in Roblox game "Stop it slender 2" but not in Roblox game "prison life" 

Read other answers
RELEVANCY SCORE 66.4

ISSUEThe 720 touchpad and touchscreen are the worst.  This issue started out of the box before I had even gone on line.  When the touchpad does work, the right click/left click distinction doesn't work and I have to use the screen, when it's working, for the long hold until the right click options appear. When the screen is working, the ability to close a window and touching it just the right way is dubious at best.  I've tried modifying sensitivity, etc, in the control panel, but there is no difference.   When both window and touchpad stop functioning, I plug in an old HP mouse I have, but when I'm mobile, this means running the mouse down my leg if I don't have a surface to place my laptop upon.  And it also means carrying a mouse with me everywhere I go.  My line of work is often standing and walking with clients so  not really possible in my line of work.   RETURN/REPAIR OPTIONS AREN'T OFFERED OR ARE NOT PRACTICALTo back up a bit, I attempted to return this to BestBuy, but was four days beyond the allowable return date.  I contacted Lenovo, but it's all about mailing it in or turning the laptop over and being without anything for a few days.  Hard to find those few days.  I've tried to live it, but it's been an enormous killer of productivity, not to mention incredible frustration and some embarrsassing typos.    PAST YOGA BUILD WAS GREAT - WHAT WENT WRONG WITH THE 720?My last Yoga 710 wa... Read more

Read other answers
RELEVANCY SCORE 66.4

How do I enable the touch screen on my Probook 430 G3.  It says it has the feature, but I can't find it.  ThanksLu

A:enable the touch screen

As far as I am aware, your notebook is not a touchscreen version.  The specifications verify that to be the case for most notebooks of the model that you own. What is the complete product number or product name of the G3 notebook?  - see This HP web document if you don't how to locate the complete model number and\or product number. http://www8.hp.com/emea_africa/en/products/laptops/product-detail.html?oid=9043871#!tab=specs http://www8.hp.com/nl/nl/products/laptops/product-detail.html?oid=7834547#!tab=specs 

Read other 1 answers
RELEVANCY SCORE 66.4

How do I enable the touch screen on my Probook 430 G3.  It says it has the feature, but I can't find it.  ThanksLu

Read other answers
RELEVANCY SCORE 66.4

I own a Fujitsu TH700 Tablet PC. It initially ran Windows 7 and everything was working really well on it, but then I upgraded to Windows 10 (I was curious) and some features just have not worked properly since. The one problem that I have been unable to fix is the touch screen. When the computer is in its "laptop position" (see image) the touch screen works just fine. However, when I rotate the screen and click it into the "tablet position" the touch screen becomes completely unresponsive. When I lift the lid again into the "laptop position", the screen remains unresponsive until I put the computer to sleep and wake it up again. After that, it works completely fine.

When the laptop screen is turned and clicked into the "tablet position", there is a programming shift that happens to turn the laptop into "tablet mode" (this is not the same as Windows 10 tablet mode. In-fact, Windows 10 tablet mode doesn't recognize me turning the screen and clicking it into the "tablet position"). I'm not sure what the differences are between the TH700's laptop mode and tablet mode. The only thing I can see is that the screen auto rotates (as shown in the image).

This malfunction started occurring soon after I downloaded Windows 10, but I'm fairly sure it was working properly for a week or so. It was only when I connected my TH700 (in the "tablet position") into an external projector that the touch scree... Read more

Read other answers
RELEVANCY SCORE 66.4

I have just bought a 7" Android tablet from China at a very good price. It works well except for one thing, scrolling on the touch screen. I have to press hard to get it to scroll which causes it to open up what was pressed or it will scroll very quickly to the bottom of the page. I don't seem to have any control over the scrolling. I have contacted the company about this and I am waiting on a reply. Would anyone have a solution to this problem? Thanks.
 

A:7" Tablet touch screen problem

Perhaps there's a setting for touch screen sensitivity?
 

Read other 11 answers
RELEVANCY SCORE 66.4

I have an ASUS tablet that I don't know the model nor is it listed anywhere on the tablet. it originally had a detachable keyboard but the guy that gave it to me didn't have it. according to device manager, it has a generic touch screen driver. I have frequent unresponsiveness and sporadic automatic touches a with the touch screen, and I think it may be due to the generic touch screen drivers. If I had the ASUS one, I think it would work better. Device manager reports the hardware ID as: HID\VEN_ATML&DEV_1000&Col01 but no search engine can find it. Google had only two pages of results, all of which were dodgy. Many others like Yahoo only had one page of results of the same dodgy or other dodgy results. I was wondering if you can lead me to the right one. You have been so helpful with finding me drivers before so I am sure it would be no problem.

A:Need touch screen drivers for ASUS tablet

Please download MiniToolBox to your desktop.
 
Right-click on MiniToolBox.exe and select Run as Administrator.
 
You will see an image like the one below.
 

 
Click on the following checkbox only:
 
• List Installed Programs
 
Click on Go to start the scan.  Once it is finished highlight the text, then copy it and paste it in your topic.

Read other 9 answers
RELEVANCY SCORE 66.4

my hp x2 210 tablet fell down and broked . The touch is also disabled ! i want to replace ithow much will it costs? please contact me at [email protected] india bangalore, karnadaka

Read other answers
RELEVANCY SCORE 66.4

This is my first post here. I use PSPro for drawing for fun. I use a mouse. Recently I was given a tablet. In theory this is better, as holding a pen is easier than the mouse for drawing. The main problem is that the image is on the laptop screen and the pen is on the plain tablet, so you have to guess where to start drawing by moving the pen around until the cursor is positioned where you want it. The next problem is that I do not want to relearn all the PSP commands (and positions around the edge) on the tablet. The mouse works with the tablet, but putting the pen down to use the mouse is a hassle. There are expensive (around 1000) tablets with a touch screen where you draw on the image, just like a pencil on paper. Too expensive for me. Is there a touch-screen tablet that will work with Paint Shop Pro? What about an Ipad? I dont really know how a touch screen works with a programme liike PSP. Do you just touch the screen in the same place as you would position the cursor? Does a tablet have USB ports so I could save my work on a memory stick, or by cable to the drive in my laptop? I dont know if its possible, but If I could draw on the touch screen and save my work on my laptop, this would be ideal. I hope someone can help. Thanks in advance.
 

A:using paint shop pro on a touch-screen tablet

Read other 6 answers
RELEVANCY SCORE 66.4

Hi,

Configuration :
HP Pavilion tx2000z CTO NB
Genuine Windows Vista Home Premium with Service Pack 1 (64-bit)
AMD Turion(TM) 64 X2 Dual-Core Mobile Technology Gold Edition TL-68 (2.4 GHz)
12.1" diagonal WXGA High-Definition HP BrightView Widescreen (1280 x 800) w/Integrated Touch-screen
4GB DDR2 System Memory (2 Dimm)
NVIDIA(R) GeForce(R) Go 6150

NVIDIA GeForce Go 6150 Video Driver - 7.15.11.5682
This is the video driver version for my HP tablet(HP Website). But unknowingly I installed the latest version(7.15.11.7770) from NVIDIA through Windows update. And from that time onwards, my touch screen stopped working. It is not recognizing my stylus/finger.
I contacted HP care and they advised me to follow these steps.
1) Uninstall the latest driver and install the 11.5682 driver
2) Bios Flash
3) Calibrate
I am done with the first two steps but still my touch screen is not recognizing the pen. So I couldn't calibrate.
When I contacted the HP care again, they are telling it may be because of hardware failure. My notebook is working perfectly except this touchscreen.

Please anyone help me to solve the issue.

Cheers
Arun

A:HP TX2000Z Tablet touch screen not working

Can you please tell me, what is the best way to install video drivers.

I tried in 2 ways
devicemanager ->display adapter -> Nvidia 6150 -> uninstall
Add/Remove Programs -> Remove only display adapter

After reboot, still it is asking me "Do you need to overwrite the files?

Read other 3 answers
RELEVANCY SCORE 66.4

Hi there...please help!!!! My touch screen has randomly stopped working, also when I flip my screen to tablet mode it no longer automatically reorientates itself. It is a Yoga 2 13 laptop type 80DM running Windows 10 (64Bit). Many thanks!!!    

A:Touch screen and tablet mode issues

Sorry forgot to add that it is a Yoga 2 13 laptop type 80DM running Windows 10 (64Bit)

Read other 1 answers
RELEVANCY SCORE 66.4

I aquired an HP TX1305US convertable touch tablet. it seems to have some issues with the touch screen. first of all, half the time, the touch doesn't work. anytime i flip the screen around into tablet mode, the pointer goes haywire and when i go back to laptop mode, the pointer is stuck in the corner, and it can't be moved. also, the application toolbar comes up and the only way to fix it is to reboot. i uninstalled the tablet functionality through windows and reinstalled and the problem is still there. additionally, when the touch screen was working, i had to use alot of pressure. i was kind of expecting it to work like an ipod touch or pda. i'm not sure if this could be hardware or software. the laptop has vista ultimate. i checked ho for all the updates and everything should be current. any ideas of what could be the problem?
 

Read other answers
RELEVANCY SCORE 66.4

My Lenovo U410 Touch recently got damaged - the hinge broke causing the touch screen to **bleep**.I was told that a repair was not feasible as none of the repair shops near me were able to source the parts needed.I therefore bought a new laptop. However, there is a lot of data on the old laptop that I want to access, including sorting out the licensing of MS Office (by uninstalling from the old one).I cannot do anything about it as the old machine is completely unusable as due to the touch screen being cracked, it seems to think it is constantly being touched in multiple places on the screen. This means that I cannot access the laptop to copy the data or uninstall Office. Anyone know any way around this that doesn't involve taking it to a repair shop to "recover" my data. Cheers

Read other answers
RELEVANCY SCORE 65.6

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

Read other 1 answers
RELEVANCY SCORE 65.6

Hey everybody, I just received my P40 last week as a replacement for another Lenovo device. So far, everything seems to work fine with one exception: When I turn the screen over to the "tablet position", the touch screen and the touch pen show erroneous behaviour.a) As soon as I make the first input with the touch pen, I cannot make any further input with my finger, so the touch input is simply turned off. The Windows setting to ignore touch input when the stylus is used is not active.b) When I try to tap buttons at certain areas of the screen, especially at the upper edge, the cursor of the stylus starts jumping around and shows up at the lower edge of the screen. That means that when I for example tap on the "X" symbol in the upper right corner to close a window, I actually click on some of the symbols in the system tray in the lower right corner. This problem stops occuring as soon as the angle between the two case parts (screen and keyboard) reaches/exceeds approx. 40. It does not matter if Windows is in "Tablet" or "Desktop" Mode. I already tried to manually install another Wacom driver mentioned at https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Wacom-Tablet-Service-for-ISD-Driver-Win... and https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P40-Yoga-issues/td-p/3293985. I had no luck trying driver versions 7.3.3.12, 7.3.4.8 and 7.3.4.13. I would really appreciate your help since this issue makes working in the tablet position... Read more

Read other answers
RELEVANCY SCORE 65.6

I just bought a new PC All-in-one Z3-710. However the touch function on the screen is not working. Could anyone assist me to fix the issue.

A:How do I enable touch function on Z3-710 PC screen...

Not all Z3-710 models have a touchscreen. Can you shoot me a private message with your serial number so I can verify that your specific model supports that feature?



Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

Read other 1 answers
RELEVANCY SCORE 65.6

The touch screen is not working and we just bought this tonight.  The display in the store had touchscreen.  I cannot find anywhere on the box that says it is touchscreen.

Read other answers
RELEVANCY SCORE 65.6

Hello guys I just brought this new refurbed lenovo pc. Lenovo x220t Under system -> pen and touch it says that "it supports pen and touch with 2 touch points" The pen works fine, but can someone tell me how to enable touch or if it even is touch?Machine Type Model4298CG3Benjamin   

Read other answers
RELEVANCY SCORE 65.6

I have a yoga x1 gen 3. Is there any way to have the touch screen enabled only when I fold it all the way over to tablet mode. And do it automatically so that I don't have to manually switch the touch screen on and off? Thanks

Read other answers
RELEVANCY SCORE 65.6

My son showed me his iPad today running a program called Notability. He had a special pen used to write on the screen and he could store is drawings and/or notes as files the same as we store Word documents.

I have no desire to change to a Mac so here's what I'm considering.
A Windows 10 touch-screen-type tablet with i7 (or maybe i5) processor, a keyboard that can either be used like a stand-up laptop and folded back for use like a tablet.
A program like his Notability for Windows (I have no idea what is available or what it would be called.)

Advice and accounts of your experience appreciated.

PS, I really don't care for the Microsoft Surface Pro I have seen and have found so far that Asus seems to give a really good bang for the buck.
 

Read other answers
RELEVANCY SCORE 65.6

Hello
I have a Lenovo tablet (yoga tab 2) it was installed Windows 8.1
During upgrade to Windows 10, it turns off and then sends the following error message:

A require device isn't connected or can't be accessed.
Error code: 0xc000000f

Now when I try to install Windows 10 or 8.1 (with a bootable flash), after knowing the flash, and in the first step (in language selection),
the tablet's touch screen does not work.
I tried many times but I did not get any results.
I'm glad if a friend guides me.
Thanks

Read other answers
RELEVANCY SCORE 65.6

i have x230 tablet and windows 10 on it , my touch screen stop working hand touch ,but pen is still working very good , how solve it ?

Read other answers
RELEVANCY SCORE 65.6

Hi

I've just acquired a Satellite R10-101 Laptop/Tablet.

The machine did not come with a touch pen so I am unsure if the touch screen is working or not.

When the machine is in tablet mode the touch screen does not respond to any touch with a finger. I have tried a pointing device from a hand held Windows CE device that has a touch screen but this does not work on the R10's touch screen.

Does the touch screen need to be enabled or do I need to obtain a Toshiba Touch Pen?

The machine is running Windows XP Tablet Edition. Will I get the same functionally if I upgrade to Windows 7. Is the R10's hardware compatible with Win 7?

Thanks for any help or advice.

Joe

Message was edited by: Joe Blow

A:Satellite R10-101: touch screen does not respond in tablet mode

Hi

The display panel works as a touch sensitive digitizer screen.
You need the Tablet Pen in order to use the touch display in tablet mode.

I think that you can order the missing tablet pen from Toshiba authorized service partner in your country or google for the part numbers: P000407550 or P000445420

Read other 3 answers
RELEVANCY SCORE 65.6

hi everyone, i am a new one, i have one install problem.
the touch screen is iltek, and it is work on the setup stage, (during the boot up), but when it is finish install, the touch screen not work at all...,
i need to restart the tablet many time, some time it will lucky get recognize for the touch, but it is not usable...
any solution or same Situation?
the touch screen is 100% work on the windows 7 and android x86.

thx for your help.

A:tablet touch screen problem in windows 8 install

Do into your Device manager and check if any devices need drivers. What model laptop is it cos you may need to install the touchc screen software pertaining to the tablet.

Read other answers
RELEVANCY SCORE 65.6

I have a basic model of the YOGA 300 (11 BY).  Due to size limitations of the eMMC drive, I couldn't upgrade to windows 10 (not enough disk space). So I downloaded the windows 10 installer/ISO to a 32gb SD Card, and upgraded from there.. actually (probably a mistake in retrospect) I did a clean install.. Windows 10 runs with no problems, and I downloaded./installed all the Lenovo drivers for windows 10 for this machine. Unfortunately I now have two issues: 1. When I flip the screen into tablet mode, the laptop doesn't seem to realise, and so I don't get the auto-tablet mode that I would expect? 2. Even with all the Lenovo drivers for this machine installed, I do not get any touch-screen response at all.. only mouse driven. Any help would be appreciated. P.S:  Anyone with the same version of YOGA 300 with an eMMC who wish to gain more drive space?  You can buy a cheap USB 3.0 slimline USB disk (because the SD Card sticks out a bit) and create a VHD which gives you a second "real drive"... this was particularlly useful when wanting to store my dropbox/onedrive sync locations!










Solved!
Go to Solution.

A:YOGA 300 11by No tablet mode or screen touch after...

Exactly the same problem here too.

Read other 9 answers
RELEVANCY SCORE 64.8

I recently bough an Asus VivoTab Smart running windows 8 and everything was fine up until today when at some point the touch keyboard stopped disappearing whenever i needed to log in to the tablet! its annoying to have to find the on-screen keyboard and
i would like to have the touch keyboard back.

I have tried restarting many times and that does nothing, i have tried updating the driver but i cant as it says that it already has the driver up to date and that its running properly!

Any help is appreciated! thank you,

A:Windows 8 tablet touch keyboard DISAPPEARED from login screen!

I don't know if this will help you but it solved a similar problem I had on my Windows 8 touch PC:
If you are able to reach the Start/app tile screen or desktop and from there "view local services" which you can find by typing "services" in the Start screen scroll down the list until you come to the "Touch Keyboard and Handwriting Panel Service" which
should say "Automatic (triggered)" and "Running"
From there "right-click" that service (or otherwise get into its properties), click the "Log On" Tab, click the first option under "Log on as:" (circle button "Local System account") and make sure to Check box "Allow service to interact with desktop"
For me this box somehow became unchecked when I "Refreshed" my windows 8 to solve another issue. Once I checked the box, the keyboard started to reappear at the login screen.

Read other 4 answers
RELEVANCY SCORE 64.8

Thinkpad Yoga 11E 20D9I upgraded the RAM and SSD as per this thread: http://tinyurl.com/l3e7yvzSince that was done, I installed Windows 10 and Office Professional. Now, I have no tablet mode or touchscreen. I have updated all the drivers and BIOS and etc that was suggested in the Lenovo scan. It did nothing to resolve the issue. I searched for previous posts of the same problem and none of the solutions worked either. Note: I do not have anything pertaining to touchscreen in Human Interface in Device Manager and tablet mode is enabled under settings. I appreciate any help.Thanks so much.

Read other answers
RELEVANCY SCORE 64.8

Hey to everyone. I have a question since lenovo seems to lack on a informations when it comes to this. I bought a used X220 and cant identify if it should be multitouch or pen input only model. Screen part number is (according to lenovo page):04W3462Model Number is 42962WUTouchscreen with finger doesnt work ( if it has any).I dont have a pen (stylus) currently since it was not provided with laptop BUT:Windows in properties says : No pen or touch input is available for this display .Reinstalled windows freshly twice along with drivers (once manually downloaded , second time used Lenovo System update)Still says the same, and there is no tablet or pen and touch settings in control panel.In some other topics , someone suggested to similar problem as a solution installing wacom pen drivers, lenovo digitizer drivers etc.Tried provided drivers , and with every driver throws the same error : a supported tablet was not found on the systemMaybe it has to detect pen near the laptop and it should be fine?Did I just got ripped off?Thanks a bunch!










Solved!
Go to Solution.

A:X220 Tablet Screen type identify ( and touch input...

Ok, so the lcd is definitely multitouch , which is now a reason to concern .Basically , windows recognize it as a laptop, no hid touch input devices in device manager whatsoever.Is this a common issue? Tryed unpluging and plugging back in LCD micro cables but nothing.

Read other 5 answers
RELEVANCY SCORE 64.8

Hi everyone, I have a Lenovo X220 Tablet that has touch screen and pen. They suddenly stopped working today. The LCD screen still works pefectly fine, however. The touch screen is enabled on the touch settings. When I try to calibrate, it does not detect my finger or the pen. I also noticed that when I tried to reinstall the driver and it said "a supported tablet was not found on this system". I have the most recent bios. I am running Windows 7 that came with the laptop. All windows updates completed. Is it possible for the digitizer to be defective, but the LCD screen to work perfectly fine?Could it be just a ribbon failure?Which part would need to be replaced, if this is the case? Any advice would be appreciated. Thank you.

A:X220 tablet touch screen suddenly stopped working

Even though it looks like a single device, it is really 3 separate ones.  There is a basic panel.  There is a static discharge digitizer in the front to sense finger touches.  There is a second Wacom digitizer behind the panel to detect the pen.  Any of them can fail.  The wires in the cable can also crack.  Since both digitizers failed, I would first look in device manager to see if there could be a problem with a USB hub.  (digitizers both connect as USB devices.)  My next guess would be the cable.  Sorry I cannot be more definite.

Read other 6 answers
RELEVANCY SCORE 64.4

hello i want from you to help me i bought laptop lenovo g50-80 touch from amazon it was working good until something happened then the monitor touch screen didnt work at the first it was working very good but now it doesnt want to work i searched for solution but i didnt find anything also the numbers on the right side of the keyboard doesnt work either even if i activate the num lock button  plz answer me and thank you

Read other answers
RELEVANCY SCORE 62.4

Since I bought (Aug 15 th) my Lenovo X1 Tablet I've noticed that sometimes, suddenly the screen (for a sec o two) turn into blurred (a kind of pink) or black  (this last one since 4 days ago). Anyone knows if this is a Software, Hardware or both problem and how I can fix it?Many thanks in advance

Read other answers
RELEVANCY SCORE 62

Hi guys So i recently ran into a problem, when i try to boot my laptop it will hang at the lenovo splash screen and it will be like that for a long time if i dont turn it off. I tried disconnecting main battery and bios battery, it did help but when i shut it down for like 3 hours came back and turned it on back again it was stuck at splash screen again. I also noticed that when it stuck during boot and i shut it down from the power button and turn the laptop on again its booting normally. Also tried removing all usb devices and booting the laptop and it still does the same hangs at the splash screen. Please guys help. Best regards Gerard

Read other answers
RELEVANCY SCORE 62

My Y50-70 Touch has been sitting in my drawer for over a month now since i only use it for school. I start school tomorrow so i decided to start it up and charge it but it gets stuck on the loading screen with the spinning circle after the lenovo logo pops up. Its been on the booting screen for over 3 hours and wont turn on. Help please!

A:Lenovo Y50-70 Touch stuck on lenovo booting screen

Ive tried resetting the pc, start up repair, system restore and none of them are working. i get errors

Read other 1 answers
RELEVANCY SCORE 61.2

I have 2 tablets , x60 and x61 . My plan is to build x601 frankenpad not by swaping motherboards but multi touch screen from x61 to x60 . My question is will x60 support the multi touch without swaping motherboards as well ? Like i said i have2 complete laptops so the screen form x61 will come with all the assembly . Just need to know before i start .  Thank you .





T60p Frankenpad

Read other answers
RELEVANCY SCORE 61.2

I have 2 tablets , x60 and x61 . My plan is to build x601 frankenpad not by swaping motherboards but multi touch screen from x61 to x60 . My question is will x60 support the multi touch without swaping motherboards as well ? Like i said i have2 complete laptops so the screen form x61 will come with all the assembly . Just need to know before i start .  Thank you .





T60p Frankenpad

Read other answers
RELEVANCY SCORE 60.8

My X220 tablet comes with pen and limited touch support with 2 touch points. I have no issues on windows 7 but on windows 8.1 it has changed to be working with only 1 touch point since some time that I don't remember exactly when. So that I can work with one finger only and 2-finger functions such as pinch to zoom are unavailable. My drivers are all uptodate. I think I should completely uninstall the related driver before reinstalling but don't know how to procede and couldn't find the solution. I tried uninstalling all HIDs through Device manager and one-by-one, specifically wacom device. when I uninstall it, I lose touch option completely. but reinstalling through Device Manager sounds like recovering exactly the previous faulty condition. Maybe there is a conflict with windows 8.1 like Microsoft Input Configuration Device which might be unlikely.  So is there any other way to have full wipe and clean reinstall of those touch screen drivers? I appreciate it if you put links to the drivers for me, if they are not available on Lenovo Support. Tell me if you had the same touch issue in Windows 8.1  and how you solved it. Thanks 

























Device manager.JPG ?72 KB

Read other answers
RELEVANCY SCORE 59.2

Hi guys.. Long time no see.. I have a problem with my x220t and need help for somebody who knows hardware side of the things on these laptops.. Here is a puzzle: So basically, my screen was flickering for very long time, it would start randomly and pressing a area around LCD cable connector or rotating the screen would cure it. I would usually put something between connector of cable and keyboard like a piece of thick paper or plastic and it would work as a temporary solution for over a year.. Problem got a bit irritating and I figured cable is not expensive so I should order and replace it. First ordered wrong cable from normal X220 without noticing. Cable is physically the same but doesn't have 3rd wire branching for camera. I connected it anyway because it fits into connectors but laptop doesn't start at all. When disconnecting the cable laptop starts.. At this point I've already completely destroyed my old cable , it just fell apart , wires seperated from connector etc.. So I ordered exact same cable on ebay by same number... All of the cables on ebay by that number say they are for x220t x230t etc. and look the same.. When cable arrived I hooked it up and laptop starts, but no screen at all.. By looking closely into the screen I could see backlight working but it seemed weaker , by pressing fn+ brightness + it would get stronger but it seemed weaker than usual, but can't say for sure because I was outside on a daylight( covered screen though) .. By pointin... Read more

A:Lenovo X220T Tablet - Screen / LCD cable / LVDS Problem

HelloThere is the only LCD cable for x220t, FRU 04W1775. Its image:https://download.lenovo.com//Images/Parts/04W1775/14.jpgRegarding the issue - the fuse in the LCD backlight might be blown up.

Read other 2 answers