Over 1 million tech questions and answers.

Yoga 900 - does not display on external monitor when awaking from sleep / energy save

Q: Yoga 900 - does not display on external monitor when awaking from sleep / energy save

Hi, I'm using my Yoga 900 on the desktop for longer periods of time. When it awakes from sleep it does not always "remember" that it was last displaying on the external monitor. Sometimes I have no picture at all, sometimes I have the picture on the internal monitor. When I switch to external only with F10, it won't do that, so the external monitor (HP 24es) won't wake up. Up to now my only solution is to plug out and back in the Type C adapter (Apple 3x multi adapter). That's definitely not what I want to do several times a day. Thanks for any hint...!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Yoga 900 - does not display on external monitor when awaking from sleep / energy save

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 92.4

i  just ran an powercfg /energy command in command prompt and this is the generated .html files in c:\windows\system32
can somebody help me fix this im using windows 8 pro with media center
i have a problem too when sleeping my laptop and when awaking it the lock screen opens then it blinks every 4 to 3 seconds then i cant log in maybe this is a problem to powercfg /energy how can i fix this?
 
 
thanks!
appreciate it
 
also i cant log in to my account when awking my laptop from sleeping i have to remove my battery again...it just blinks every 3 -4 seconds......anyone?help me plss?
 
the report file .html
  energy-report.html   32.92KB   1 downloads
 

A:powercfg /energy errors and blinking monitor after awaking laptop from sleeping

You already have a topic on this issue that was moved to this forum, from the Windows 7 fourm. To avoid confusion I am closing this one. Please continue in your original topic here: http://www.bleepingcomputer.com/forums/t/510658/help-powercfg-energy-27-errors-how-to-fix-this/

Read other 1 answers
RELEVANCY SCORE 81.2

Thinkpad X1 Yoga 2nd, screen flashes white and accompanied by a buzzer alarm, after awaking from sleep.The windows OS would not show anything alarm and could do anything,  but the screen...In this condition,  shutdown computer would fail and the progress bar will endless progressing.but, if you Turn the computer back into the notebook mode, everything will return to normal...computer detail?i7 7600 cpu16GB ram1TB SSD2k oledpls pls pls help...

Read other answers
RELEVANCY SCORE 79.2

I routinely use a second monitor but these last few weeks either the laptop doesn't recognize the 2nd monitor or else it does breifly and then the monitor blanks and goes into low power/power saving mode.  Same issue with two different monitors.  There is no problem with the laptop's built-in display. After researching, I suspect it is a by-product of the recent Windows 10 update.  Mixed advice on solutions.  I tried updating all my drivers from Windows Device Manager.Several posts recommended going to manufacturer (intel) and downloading drivers. Its automatic utility did not detect a current driver, but under older versions there was one from about a year ago. (I didn't try to install.)I've changed power settings so have monitor "always on". No difference. What else can I try? This is really frustrating.

Read other answers
RELEVANCY SCORE 77.6

Hello all,

I've set my external monitor as primary because the laptop screen is broken, via Q&A: How do I make an external monitor my laptop's primary display?.

However, when waking from Sleep the primary display is switched to the broken laptop screen instead of the external. If I hit Window+P on my external wireless keyboard, I am able to select the external monitor and then it will come on, most of the time.

Is there a way to set the external monitor as the primary after sleeping? Perhaps a third-party program or registry tweak? I've googled around and searched this forum, but have not had much luck. All drivers are up-to-date

I found this forum post which looks promising, but not sure if the solution proposed is applicable to my case.

Thank you.

Laptop: HP Pavillion G6-1d60US
Monitor: Viewsonic VX900

Read other answers
RELEVANCY SCORE 77.2

For a couple of years I've my Yoga 900 laptop with 2(!) Dell P2415Q 4K monitors using a USB-C to MiniDP dongle. I was shocked the laptop could handle both of these monitors (combined resolution 7680x2160!), but it did just fine. I recently sold them and am now using the laptop with a single Dell U3417W widescreen monitor (resolution 3440x1440). For some reason, even though the new monitor has FAR fewer pixels that the two 4K monitors did combined, the laptop will now frequently get into a state (often after a sleep/wake cycle) where the screen starts blanking out every 3-5 seconds. Usually I can't get it to stop until I do a shutdown and cold restart of the laptop. I have the latest display driver available on Lenovo.com for this laptop. What's going on here, and how can I fix it? Thanks in advance for any help!

Read other answers
RELEVANCY SCORE 76.4

I run 3ds max and photoshop on my computer. I have an Nvidea 7300 GS graphics card and a Dell 2007 WFP 20". For two months now I've been trying to diagnose why my monitor keeps going into energy save mode. The monitor has both VGA and DVI. It started with the DVI plug and the computer would need a restart to get it back on. So I switched to VGA and that worked for a little while and then it started happening again. I then opened up the computer , took out graphics card cleaned it and fastened it back into its slot...no improvement. I set it to the lowest refresh rate, still nothing. I did a video card stability stress test and the results turned out fine.

I switched my monitor with my other dell 17" monitor to test if it was the monitor, which only has a VGA plug and it never turned off...it worked fine. And the 20" Dell did fine on the other computer as well. I could continue working with the monitors switched but I would like to do my 3D work on the bigger screen with the DVI connection (since thats what I bought it for)

Unfortunately, I don't have another video card to test it out but I"m at my wits end. Is it the graphics card? Is it the cable port on the graphics card? Is it both the DVI and VGA cable itself? Is it the motherboard? Is it the temperature? WOuld changing my NVIDEA settings help? Do my BIOS need to be changed? Any advice or suggestions would be greatly appreciated! I'll buy another video card but before spending the mo... Read more

A:Monitor keeps going into energy save mode

Have you checked your bios settings and made sure the bios isn't causing the problem.
Disable the power settings inside the bios. Check to make sure your power settings in the OS itself aren't set to turn off at 5 minutes and change them. Jazz
 

Read other 1 answers
RELEVANCY SCORE 76.4

hi, I just upgraded from an X1 carbon to an X1 yoga with OLED screen. I connect to a Dell U3415W monitor and use extend display.The display quality on the laptop is outstanding but when I connect to the montior it isn't very sharp. I'm running monitor resolution on 3440x1440, and using HDMI cable. I had no issue when using the X1 carbon.I've updated display drivers. Any ideas? thanks

Read other answers
RELEVANCY SCORE 74.8

I have a Dell 530s desk top that i bought in 2009. My monitor( Dell S2209W) will not come out of energy save mode.I can here the computer working in the back ground. Here is a list of things that I have tried to do. I have checked all of the connections and I have unplugged the power cord. I have replace the video cord with a known working one. I have plugged the monitor to another computer and it works fine. I left it unplugged for a few days. I am unable to get in to the BIOS. I have replaced the CMOS. I have unplugged the power cord and held the power button down. I don't think it is not Vid Card because I am not getting any "beep codes". I have also tried sweet talking it and that did not work. I moved around the RAM. I remove the hard drives and and still nothing. I an running Vista OS , 500GB and 250 SATA Hard Drive. I have looked all over the internet and nothing that i saw online worked. I called Dell and the did not help.
 

A:Dell s2209w monitor will not come out of energy save mode

Have you tried hooking up a different-working monitor to the computer? That will let you know if it's the computer or not.
 

Read other 3 answers
RELEVANCY SCORE 73.2

When I boot up without a connection to an external monitor I experience some display issues with text sizing of certain objects within certain applications (e.g. Microsoft Visual Studio).  In these applications parts of the User Interface display perfectly.   Other parts of the same application will have vastly oversized objects and text.  And, in another application the text is greatly undersized in certain portions of this app. When I boot up while connected to an external monitor everything displays perfectly on the external monitor.   This happens without making any changes whatsoever to system display setting or application configuration settings.  If I disconnect the external monitor the X1's internal monitor still displays everything perfectly.   But if restart while disconnected from an external monitor I experience the same display issues as described in the 1st paragraph. I don't think this problem was always there, but  I cannot say for sure.  It just got so annoying that I finally decided to write to the forum today.   I would guess that the problem has been this way for 1-2 months. The Lenovo System Update app tells me that everything is up to date.    Is there some setting or perhaps driver that needs to change? Tim

Read other answers
RELEVANCY SCORE 67.2

I am running window 7 ultimate 64bit on my dell vostro 1520. recently, i have shut my laptop only to open it to a BSOD after it loads the login screen. it then restarts and says nothing about having crashed. only once has it restarted asking if i wanted to try and boot from that resume data or delete it and start again. I looked to this thread for reference:

http://www.sevenforums.com/crashes-d...ter-sleep.html

but when I tried to get a minidump after a crash there was nothing in the folder when i rebooted. Do I need to start the computer in safe mode to get it or should I be fine booting up regularly? Is there something else that I should be doing?

A:BSOD After Awaking from Sleep

  
Quote: Originally Posted by jeffreyabr


I am running window 7 ultimate 64bit on my dell vostro 1520. recently, i have shut my laptop only to open it to a BSOD after it loads the login screen. it then restarts and says nothing about having crashed. only once has it restarted asking if i wanted to try and boot from that resume data or delete it and start again. I looked to this thread for reference:

http://www.sevenforums.com/crashes-d...ter-sleep.html

but when I tried to get a minidump after a crash there was nothing in the folder when i rebooted. Do I need to start the computer in safe mode to get it or should I be fine booting up regularly? Is there something else that I should be doing?


Hello,

Lets enable the MiniDump Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
In the Write debugging information list, click Small memory dump (64k).

To change the folder location for the small memory dump files, type a new path in the Dump File box
The follow this link to post dump file http://www.sevenforums.com/crash-loc...d-problem.html

Hope this helps,
Captain

Read other 9 answers
RELEVANCY SCORE 67.2

Hello

Recently added a Sandisk storage SSD and now PC crashes shortly after waking from hybrid sleep almost every time.

Worked with just Samsung SSD as boot drive without any issues for years previously.

A:BSOD awaking from sleep with new SSD

Anyone able to help with this at all? Thanks

Read other 2 answers
RELEVANCY SCORE 67.2

My new 510A-15ABR has had a hickup three times since purchase.    I have 337 days of warranty left but would rather solve the problem than return the computer.    Installation and setup was a breeze.   Several days after I had the computer, it went to sleep when I left to go to lunch.   When I returned, it wouldn't awaken from sleep, almost like a permanent hybernation.  The power button was blinking.   I moved the mouse, hit the ESC key, Windows key, even hit the power button without any response.   I turned the computer off, waited about 10 minutes and when I turned it back on, the results were the same, still in some sort of hybernation.    I disassembled the computer and took it back to Best Buy and when they plugged it in, everything worked fine.   This situation has happened twice since and the only way to get the computer to respond is to unplug the power supply and wait about 10 minutes.   Each time, that has solved the issue.    There are many times the computer will sleep but awaken as normal.    The power settings are blanced with 10 minutes monitor and 1 hour for the pc to sleep.   Is there a setting in Windows 10 or the bios that is causing this malfunction.   If it hadn't happened 3 times, I wouldn't be concerned but it is annoying. Ideas?

Read other answers
RELEVANCY SCORE 66.4

Hi guys,

I'm kindly asking for some help around the above-mentioned issue. This is happening on an old Toshiba laptop (model: A200-1M8). The install is basically fresh, since it was done about a month ago. Or two. Everything is working smoothly. Except when I want to give the machine a bit of rest.

When I put it to sleep, everything goes as it's supposed to. But after awaking it with the power button, the locked screen appears for a few seconds, and then the BSoD shows up. The error code is:
0x00008086 (0x00000101, 0x00000338, 0x0000001B, 0x00000000)

When I put it to hibernate, the error code is a bit different:
0x0000007E (0xC0000005, 0x88F7EFC5, 0x8B357C24, 0x8B357800)
iaNvStor.sys - Address 88F7EFC5 base at 88F7B000, DateStamp 4a4c052e

Now I've done a ton of reading about this, but found no real answer. I know the .sys file points to a driver from Intel, so I went and installed the Robson Package, which has the Intel Storage and Turbo Memory driver. The funny thing is, it worked normally the first time after the install, but that was it. The next time it happened again.

Any ideas? I've spent the better part of the day trying to solve this.

Laptop: Toshiba Satellite A200-1M8
OS: Windows 7 Professional, 32-bit

A:BSoD after awaking laptop from sleep

Blue Screen of Death (BSOD) Posting Instructions

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
How to fill in your system specs:

Read other 2 answers
RELEVANCY SCORE 66.4

P1 i7-8850H, 32GB RAM, Quadro P200 conected to a LG 32UD99-WBoth in Windows 1809 and 1903 when resuming from sleep it will randomly happen that:Audio through the external display is lost. Audio device shows a warning mark and you have to disable/enable in device manager to get it back working.External display is no longer recognized (2 times in 24 hours) you have to disable/enable the Nvidia Quadro P2000 in device manager to get it back working. Connectivity is unreliable regarding internal graphics, external screens and thunderbolt It seems to me that these recurring graphics, display and thunderbolt issues found in P1 X1 machines are related to it. Is there anybody experiencing the same? This is a summary of bios versions with fixes related to issues alike.<1.21>UEFI: 1.21 / ECP: 1.10- (Fix) Fixed an issue where WMI BootDisplayDevice option is incorrect. - (Fix) Fixed an issue where the system might not resume from hibernation on Discrete Graphics mode with Windows10 version 1809.<1.19>UEFI: 1.19 / ECP: 1.10- (Fix) Fixed an issue where the system might BSOD when connected the external monitor.(Note)NVIDIA Graphics Driver v25.21.14.1735 or later version is required.<1.18>UEFI: 1.18 / ECP: 1.08- (Fix) Fixed an issue where the system might not boot with Hybrid Graphics.(Note)If the UEFI BIOS has been updated to version 1.18 or higher, it is no longerable to roll back to the version before 1.18 for boot problem prev... Read more

Read other answers
RELEVANCY SCORE 65.6

My new 510A-15ABR has had a hickup three times since purchase.    I have 337 days of warranty left but would rather solve the problem than return the computer.    Installation and setup was a breeze.   Several days after I had the computer, it went to sleep when I left to go to lunch.   When I returned, it wouldn't awaken from sleep, almost like a permanent hybernation.  The power button was blinking.   I moved the mouse, hit the ESC key, Windows key, even hit the power button without any response.   I turned the computer off, waited about 10 minutes and when I turned it back on, the results were the same, still in some sort of hybernation.    I disassembled the computer and took it back to Best Buy and when they plugged it in, everything worked fine.  
 
This situation has happened twice since and the only way to get the computer to respond is to unplug the power supply and wait about 10 minutes.   Each time, that has solved the issue.    There are many times the computer will sleep but awaken as normal.    The power settings are blanced with 10 minutes monitor and 1 hour for the pc to sleep.  
 
Is there a setting in Windows 10 or the bios that is causing this malfunction.   If it hadn't happened 3 times, I wouldn't be concerned but it is annoying.
 
Ideas?
 
Mod's Edit: System model added to the front of Subject lin... Read more

Read other answers
RELEVANCY SCORE 65.6

I just got this new samsung series 5 laptop and it keeps wanting to restart after it wakes up from a sleep. Changed the settings so that when I close the lid it does nothing, but even pressing the power button to make it go to sleep then makes it crash on awakening. I've heard it's a problem with one of the drivers and needs updated or deleted but I don't know which one, thanks for any help. My minidump files info etc is attached

A:BSOD I think, laptop restart after awaking from sleep

BSOD's blame your Atheros wirelss network device. Please:
- download a fresh copy of the latest, Win8 compatible version of this driver
- un-install the current version from your system
- install the freshly downloaded copy
- monitor for further BSOD's

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I suspect the same issues with Win8 also.





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ALSysIO64.sys Sat Jul 9 20:27:45 2011 (4E18F201)
Core Temp - CPU temperature monitor
http://www.carrona.org/drivers/driver.php?id=ALSysIO64.sys

CLVirtualDrive... Read more

Read other 2 answers
RELEVANCY SCORE 65.6

I am using a Pavilion p6240f desktop computer with the latest Windows 10 Anniversary upgrade.  The computer will go to sleep either manually or by the Windows 10 sleep setting time.  The power buttons on both the monitor and the computer go to amber when it enters sleep mode. When I touch a key to wake the computer, the power button on the computer tower clicks on blue and but the monitor button stays yellow.  The computer is now hung with nothing happening and no keys function.  I have to manual shut down the computer by holding the power button for several seconds until the light goes off, then press it again to restart.  Now, it goes through a normal booth up and works fine until the next sleep mode. I've had the HP Support Assistant check for updates and there are no new updates.  I had Windows 10 Troubleshooter check for Power problems and none were found. Could someone please help me with a solution to this problem? Thanks...Bob  

Read other answers
RELEVANCY SCORE 65.6

Hi,
I'm having a blue screen problem with my computer. I just did a fresh install of vista biz 64-bit on my computer. I've downloaded and installed all the important and recommended from windows updates. When ever i put my computer into sleep mode its fine. But when i awake it from sleep mode the login screen gets all messed up but u can roughly know where to input the login password( computer has not hung) Once password entered and try to login it hangs for a bit then goes to a blue screen after like 10 secs it restarts and goes to the black windows recovery page where by default it start windows normally again. Upon entering windows this "windows has recovered from an expected shutdown" message pops up. The details of the message is below

Error Message :

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8006C77010
BCP2: FFFFFA6004617B10
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini052009-02.dmp
C:\Users\Jin\AppData\Local\Temp\WER-228588-0.sysdata.xml
C:\Users\Jin\AppData\Local\Temp\WER816E.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

P/S :
I've attached the dump files in this post for reference

OS = Vista Biz 64-bit
Asus M3A motherboard (bios ver 1001)
AM... Read more

A:Blue Screen after awaking pc from sleep mode

The bottom line seems to be this:

Probably caused by : nvlddmkm.sys ( nvlddmkm+12b10 )

That's your Nvidia display drivers.

Nothing to suggest but try updating, reinstalling or a different version.

If you are overclocking, reset to defaults and take pains to ensure you are not overheating.

There may be a problem with the card itself.

If you are using a "SLI" configuration, try disabling that for test purposes if necessary.
 

Read other 1 answers
RELEVANCY SCORE 65.2

Having this issue with Windows and in Radeon Catalyst, in power options for monitor sleep settings this will not save if I set it to never. So invariably it turns off monitor after 15 mins, in movies and playing music this turns off sound. Really annoying it started doing this awhile back and seems no way to save the setting. Always defaults to turn off monitor after 15 mins. I have it set both in windows and catalyst to never but never saves (on a restart).

A:Monitor Sleep set to never, does not save

Have you tried setting it to several hours ?

Read other 9 answers
RELEVANCY SCORE 64.8

Hello, 
I need some assistance in diagnosing a problem with my PC. This morning, once I woke up, I noticed my computer's fans were running sporadically while in sleep mode. The fans were running at different speeds in a somewhat sporadic fashion, the computer felt somewhat warm. I could not pull my computer out of sleep mode and had to result in shutting the computer off via the power button. The computer booted up correctly and no issues are currently known. 
I have a dell 8190 desktop which I bought around 6 months ago. 
I've attached the event log from this morning.

Read other answers
RELEVANCY SCORE 64.8

Well usually I don't get these after awakening from sleep mode; maybe only a few times in the 8 months I've been using my computer.

This morning, after waking my computer from sleep in the morning (it was probably in sleep mode for about 8-9 hours), I got a BSOD.

I let everything run its course, however when my computer booted back up I realized that I had no internet connection. I turned off my router, waited a bit, started it back up, and then I was able to connect again.

However, I had to go out, and let my computer go back to sleep. Alas, once again when I woke it up my internet was gone. A reboot/reset of router/modem was required for the internet connection.

Later, I had to go eat dinner, and of course let my computer go back into sleep mode. Once again when I woke my computer from sleep mode, my internet connection was gone.

TL;DR BSOD after sleep mode one morning, now every time my computer comes out of sleep mode, I have no internet.

I am connected to the internet via a local area connection from an ethernet cable. (Desktop PC).
 

A:BSOD After Sleep Mode, No Internet After Awaking, Vista

Do you have System Restore point that predates these problems? Make sure to show dates more than 5 days old when checking.

I can run a debugging utility on the dump files if you do this:

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to c:\windows\minidump and copy the last few minidump files to that folder. *this assumes 'c' is your boot drive, if it is not, subsitute accordingly
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder.
4 > use the "manage attachments" in the "advanced" reply window to upload that zip file here as an attachment.

This might point us to a non Microsoft driver causing the error, if one exists for it.
You can also try "Clean Boot" troubleshooting >>

CLEAN BOOT TROUBLESHOOTING technique

First, restart in Safe Mode if necessary -- (tap the f8 key promptly on startup and choose the Safe Mode option from the boot menu) or Normal mode

Then:

Run msconfig and select the "Services" tab. Check "Hide Microsoft Services" and then disable the rest. Also uncheck "load startup group" on the general page.
http://support.microsoft.com/kb/929135 << written for Vista, but applies equally well to XP

Now restart and test the issue at hand

If no problems, run msconfig and recheck half the disabled items on the Services tab. Test again. If the problem recurs, UNcheck ha... Read more

Read other 1 answers
RELEVANCY SCORE 64

When I awake my computer from sleep mode, one of the data drives is missing (it is gone from This PC (formerly My Computer)). If I go into Device Manager and select Action > Scan for hardware changes then the drive is found and added back to This PC.

The controller is configured to RAID instead of AHCI in the BIOS (because I have a RAID 0 attached). The affected drive is not in a RAID array.

I've seen a lot of descriptions of this problem in my Google search (for different versions of Windows) but none of the solutions apply.

The affected drive is highlighted below:

OS: Win 10 Pro 64-bit
Mainboard: ASUS Z170 Pro Gaming
CPU: Intel i7 6700 (6th gen)
RAM: Corsair 2x8GB DDR4-3000
Graphics: Gigabyte NVIDIA GeForce GTX 950
Sys Drive: Samsung Evo 750 SSD, 250 GB
Data Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0; WDC WD2003FZEX-00Z4SA0; WDC WD2002FAEX-00MJRA0;
PSU: XFX TS 750W (P1-750S-NLB9)
Bluetooth: Parani UD100 Bluetooth USB Adapter
Logitech G500 mouse, K120 keyboard.

Read other answers
RELEVANCY SCORE 63.2

So I built my computer like last week and I was trying it out Crysis Warhead on max. Then saw my temperature thing on my case and it said 43degrees celcius, and I thought, woah thats hot, and i opened my side board but when i did, my whole computer shut down. I think i might have tripped the motherboard 24pin wires some how and it lost power and everything went down. Then when i tried booting my computer again, my monitor says in powersave mode, please move mouse or something. i moved my mouse key board and everythign and even rebooted my computer several times. I've tried many things but it won't work. Im having someone look at it in a few days, but you guys might know whats going down.

I've tried rebooting countless times.
I've repositioned my ram.
I replaced my video card with my old one, plugged vga in nothing.
i tried my monitor on my lap top, monitor works. not the monitor's fault, though i hoped it was because its easier to replace that then a mobo or whatnot.
and sometimes, when i boot, it shuts off after like 5 seconds and re-boots it self.
My keyboard light and mouse lights are off. my fans and psu and cpu fan are on and my graphics card fan is on.
maybe its harddrive malfunction? >< i hope not. but i dont think so, the monitor doesn't even turn on!
so guys, im really stumped.

and if it matters
Mobo: P5P43TD DDR3 LGA775[or something, the very common one]
PSU:550watts
CPU: intel core 2 duo e8400 3.0ghz
GPU: xfx HD4890
HDD: Wes... Read more

A:Solved: My Monitor gives me a sleep/power save signal

Read other 6 answers
RELEVANCY SCORE 62.8

Thinkpad P51 with dual (DVI and HDMI) monitors connected to Dock.  P51 wakes fine and one monitor (DVI) sees signal (awakes from sleep mode), the other sees no signal.  Regardless no video information is sent to either monitor - the DVI monitor is awake but black screen - the HDMI remains asleep. Removing and reinserting connectors has no impact. Cycling P51 into and out of sleep mode makes no difference. Removing P51 from dock and all functions correctly. USB (dongle) mouse and keyboard functions also loses functionality when P51 is docked.  They awaken the P51 but do not function correctly. removal of Laptop from dock and they function fine along with local monitor.  Re-install into dock and mouse/keyboard are inoperable. Only a hard shutdown and reboot via the dock switch (laptop remaining docked) returns the system to correct function.  All is normal and functioning.  Both monitors are immediately recognized, USB mouse & keyboard fully functional. When plugged in: Monitors set to sleep in 10 and PC in 30mins.  Short sleep (50-90mins) and system awakens correctly - overnight sleep (8-10hrs) and this happens every time.   Latest Dock FW/drivers is installed.   System and dock brand new - just arrived last week.

Read other answers
RELEVANCY SCORE 62.8

I have a Yoga X1 (1st generation).  I have the screen set to max brightness.  When I wake the laptop from sleep, the screen is always dim for a few seconds before going to 100% brightness.  I would like the screen to start at 100% brightness.  How do I prevent it from starting dim.  (Note: I have adaptive brightness turned off and I tried going into the Intel Graphics Settings and changing the Power Plan to Maximum Performance.  These interventions didn't solve the problem.)

Read other answers
RELEVANCY SCORE 62

I have a Dell XPS 13 laptop running Windows 10. I have just purchased a Dell U2515H monitor which I am waiting for delivery for as we speak. I believe the monitor has quiet a few inputs however I am not 100% sure which lead to get to connect them both and which port I use on the Dell Laptop. Looking on the left hand side of my laptop there is a port with a lightning sign next to it, is that called Thunderbolt? and is that my monitor/display port? and what lead do I need? it looks like some sort of micro socket!

Read other answers
RELEVANCY SCORE 61.6

My Yoga 710 laptop puts my external monitors to sleep once I connect them with a cable and adapter.  Each external monitor I have tried recognizes they are being plugged into a computer, because its display window will change from "no cable/computer detected" to "monitor is going to sleep".  The laptop, however, stopped recognizing that it is being plugged into an external monitor.  In addition to trying different monitors, two different microHDMI adapters, and three different cables.  I have worked with Microsoft, Lenovo, and Geek Squad to update the drivers and replace the motherboard.  Is anyone else experiencing this? Any suggestions?  This error began soon after I updated the laptop's drivers for a problem it had communicating with my wireless printer.  

Read other answers
RELEVANCY SCORE 61.6

I am working with a thinkpad L560 conected via vga to a hp monitor and when the laptop goes to sleep it resets to the lap top display instead of the windows staying open on the external.  Please help

Read other answers
RELEVANCY SCORE 61.2

Hello,I have a P71 with Windows 10 Professional. It is set to go to sleep after 15 minutes when plugged in. When I am using the laptop screen that actually happens; however, when I use an external monitor (and the laptop cover is closed) nothing happens when the deadline is reached. Any suggestions?Regards,bostjanv

Read other answers
RELEVANCY SCORE 61.2

Hello, I recently have been trying to use triple monitors, but for some reason when I try to use the 3rd monitor I get "unable to save display settings" whenever I click apply

I have an AMD Radeon HD 7800 and am connecting using one DVI, One HDMI and one third is display port that has a dvi to vga connector connected to it, and the vga going from the connector to my monitor, the displayport is the one that won''t work.

Display Port DP Male to DVI Female Connector Adapter - Black + Golden - Free Shipping - DealExtreme

This is the specific displayport I have, could there be a problem with it specifically, or are there other things I could do to test?

A:Third Monitor unable to save display settings.

Any idea people?

Read other 1 answers
RELEVANCY SCORE 60.8

Hi, my external display lost ability to fall into sleep after inactivity timeout is reached. It just turns to black screen, apparent the display is active (I don't use the blank screen screensaver). The display only switches to standby if I unplug the signal cable. Withal it was able to switch into full standby earlier. So something had to change.

I did walk through monitor menu to find if there's some settings for power saving mode, there's none.
Connected via HDMI. Have searched a bit for this problem and found only this be closest to my problem: windows 7 - Monitor doesn&#39;t sleep on power off - Super User but the topic doesn't have a solution for me (I don't see any DPMS or power off options, probably for that BIOS is in UEFI mode).

powercfg /availablesleepstates gives this report


Code:
The following sleep states are available on this system:
Standby (S3)
Hibernate
Hybrid Sleep
Fast Startup

The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.

Standby (S2)
The system firmware does not support this standby state.

Standby (Connected)
The system firmware does not support this standby state.


Any resolution on this issue?

A:External LCD display won't fall into sleep (only blank)

Do you have another monitor to try? It sounds like the graphics card realizes the computer is idle, and so it stops sending data to the monitor, but the monitor seems not to understand it needs to go into standby mode.

Swapping monitors with another computer will reveal if the problem is with your monitor, or your computer, depending on if the problems moves to the 2nd computer with your monitor, or stays with your computer with the 2nd monitor.

Read other 3 answers
RELEVANCY SCORE 60.8

Hi, I am using the default settings in the Power and Sleep settings. The notebook is plugged in to AC Power. It is plugged into the thunderbolt docking station with mouse, keyboard and ethernet connected. The display is supposed to turn off after 10 minutes and the computer is supposed to sleep after 30 minutes of idle time. It I do not connect an external display, everthing works fine. If I connect an HP27sv monitor to an HP DVI-to-DisplayPort adapter, and plug that into the docking station, then I get the following behavior. After a reboot, everthing works fine up till the first time the computer sleeps: The display turns off after 10 mintues and wakes up fine. After 30 minutes the computer goes to sleep.  However, once the computer has woken up from sleep mode, then it always goes back to sleep after two minutes. No matter what I do with the Power and sleep settings the computer goes to sleep after two minutes of idle time. I can also reproduce the bug using the sleep button on the keyboard: Connect external display Press sleep button on keyboard, computer goes to sleep Wake up computer and sign in Wait two minutes with no activity, computer goes to sleep again (should be 30 minute wait) This system has the NVidia Quadro M1000M display adapter for the docking station display ports. NVidia driver version is 354.86 

Read other answers
RELEVANCY SCORE 60.8

Greetings all, 1) I am using X1 Carbon 5th Gen with all the latest drivers and Windows updates.2) I connect the laptop via it's Thunderbolt to an external LG 4K monitor's displayport.3) However, the external monitor can't seem to wake up from sleep or during boot / restart or auto detects itself.4) The only solution is to unplug the USB-C-Displayport cable everytime I need to connect to the external monitor. Once i plugged it in, the external monitor will then wake up.5) Is there a way to make the external monitor to wake up from sleep or during boot up automatically without having the need to unplug/plug the cable everytime?6) Appreciate any suggestions or solutions. Moses

Read other answers
RELEVANCY SCORE 60.8

Hi everyone, when I wake my Yoga 900 from sleep mode, it takes around 6 seconds for the screen to turn back on. That's reasonable. My girlfriend's Yoga 900 however takes only 2 seconds, we bought them around the same time, same system etc. Also, since yesterday, when the screen goes black after the set time (e.g. 5 min) and I touch the touchpad or press any key it also takes around 7 seconds before the screen goes back on which is way too long since before it reacted alost instantaneously. What might be the issue? Could both things be connected somehow? Thanks for any help!

Read other answers
RELEVANCY SCORE 60.4

I am using a brand new Lenovo P51 with 64-bit Windows 10 with a NVIDIA Quadro M1200 video card along with an external monitor (ASUS VS228H-P) connected through HDMI. When my computer goes to sleep, my second monitor turns off. When I wake up the laptop, but 2nd monitor is no longer recognized by the machine and I am unable to use the display. I have tried a number of solutions already:1) I have tried selecting "extend display" under F72) I have tried using the detect display button in System/Display Settings3) I have updated my drivers for both display adapaters (intel graphics 630, and NVIDIA Quadro M1200)4) I have turned the monitor on and off,5) I have cycled through the input options on the monitor while it is on6) I have plugged and unplugged the HDMI cable The only solution to reconnect the monitor I have found is to reboot the computer which is impractical for me while I am using the machine (I am running programs over multiple days and rebooting is not impossible). It is also impractical to turn off sleep mode on the machine - the whole point of having sleep mode is to save my screen and reduce power usage. I also use sleep mode for security - I want my laptop to lock so that someone can't just pick it up any time and use it. I also read somewhere that someone was able to turn off and then turn on the display adapters to reconnect - but this is a ridiculous fix I won't repeat over and over again. Outside of these solutions, has anyone found a way to make Win... Read more

Read other answers
RELEVANCY SCORE 60.4

There are countless threads and posts with consumers/owners expressing issues with Lenovo ThinkPad workstations which are not delivering on expected (marketed) features/functionality, due to software related issues. Namely:
- ThinkPad Workstations lose support for external monitors when 'awoken' from Sleep mode and/or Hibernate mode
- Switching the graphics card leveraged by the system has no impact on performance (issues persist)
- It seems the only recourse is to restart the affected laptop and/or not use the features and functionality available on the device
--- this is also the most common "solution" presented to users in threads and/or users are advised to not to use multi-monitor configurations outright
 
Although many systems may be impacted, this post focuses on issues on the ThinkPad P50, the latest Workstation, which happens to have a NVIDIA Quadro M2000M graphics card.
- All BIOS/Firmware/Software is up-to-date as of writing, however, the issue persists
 
This sort of performance from a modern business-grade workstation is unacceptable.
 
As an owner of the Thinkpad P50, I would like to see this issue investigated & fixed before 2017 -- given there are threads/posts that go back, even beyond this year. This seems to be a known issue that's being willfully ignored by Lenovo and/or Think Engineering. If the issue cannot be resolved, then Lenovo needs to assume responsibility.
 
Mod edit:  ... Read more

A:ThinkPad Multiple External Display Issue - sleep r...

And what is the problem?
 
I use Thinkpad P70 with M3000 and WIndows 10 between two locations daily, each with different number monitors and different DPIs (one with 3 x 1920, one with 2 * 4K), sleeping while in the backpack, and no major problems. Rebooting maybe once a week, for non related reasons.
 
BIOS is set to Discrete only. 

Read other 1 answers
RELEVANCY SCORE 60.4

i have an external display connected via dcmi port. when computer awakes from sleep mode, the display is not recognized. even if i disconnect/reconnect the device from port, it is not seen. i must restart computer before device is recognized again. i also have similar problems with 10 port usb hub, but disconnect/reconnect fixes it.  Both fixes are overkill.  I didn't have any problems with these connections on old laptop. please advise.thx.

Read other answers
RELEVANCY SCORE 60.4

I have a Y2P which I upgraded to Windows 10 a few months ago.  I have updated all the drivers and the BIOS, done the registry fix for the DPTF driver discussed here to fix degraded performance in non-laptop mode, and turned off adaptive brightness.  Most of my use is plugged in with the machine in stand mode, with a second monitor and BT mouse and BT keyboard. After doing the DPTF driver fix, I noticed that a few times when I was away from my desk, the machine rebooted spontaneously due to a critical error which seemed to be from overheating, so I set the power mode to sleep after 10 minutes idle.  Most of the time, now, it has no difficulty waking up.  But so far twice when I have woken the machine, the primary monitor is off, and can't be found by any setting or control panel, and the auxilliary monitor behaves as though it is the primary one.  This can be fixed by rebooting or by unplugging the second monitor, and then plugging it in again. Also, a couple of times now, when the machine wakes, the primary monitor is very dim.  The first time it happened, I went into settings and made it brighter.  But when it happened today, despite my increasing brightness to 100% (through the keyboard, through the display settings, through whatever I could find) the screen stayed very dim.  I finally rebooted, and the screen returned to normal. Does anyone have any suggestions for keeping these things from happenin... Read more

A:Yoga 2 Pro monitor issues upon waking from sleep

Just replying to myself to bump this topic.  Has anyone else experienced this, and/or have an idea of how to stop it?

Read other 1 answers
RELEVANCY SCORE 59.6

HiI have a Dell monitor P2419HC and using it with Lenovo T480s via USB-C port. (it both charges the laptop and display)But, when waking up the Lenovo T480s from sleep mode, the P2419HC won't recognize the signal and says "no USB Type-C signal from your device".Reconnecting the USB-C cable from the Lenovo T480s solves the problem. When asked in Dell forums i got the following response:"By disconnecting/reconnecting the USB Type-C cable from the Lenovo T480s, you are forcing the Lenovo T480s operating system to "initiate" the USB Type-C handshake to the P2419HC. The Lenovo T480s hardware and operating system are responsible to make the connection handshake to the P2419HC. The P2419HC just waits for the handshake. The P2419HC does not "initiate" the handshake." link:https://www.dell.com/community/Monitors/P2419HC-Lenovo-T480s-no-USB-Type-C-signal/td-p/7279448 Is it fixable? Thanks!

Read other answers
RELEVANCY SCORE 59.6

I am using a 2013 Ultraslim Docking Station with my Elitebook 1040 G3 and have a Dell P2417H monitor. When I put my laptop on the docking station, almost without fail, the local display turns black with just the mouse cursor on it and the external display stays in sleep mode.  Most of the time, if I send the laptop to sleep, then wake it up again, the external monitor wakes up.   Why do I have to go through this process twice EVERY time I put my laptop on the docking station? Is there anything I can do to resolve this? I have replaced the docking station and the issue is still present. A co-worker uses the old docking station and experiences no problems.

Read other answers
RELEVANCY SCORE 59.6

I have a Thinkpad Yoga S1 and when I connect it to my Asus External 24" LCD Monitor via mini-HDMI to HDMI it drops connection every few seconds.  The cable is properly fitted so its not a loose connection and I checked that my video driver is up to date. Any suggestions? regardsSteve   

A:Yoga S1 and external display output

hello Lenovo Support, Are you able to help with this? RegardsSteve 

Read other 2 answers
RELEVANCY SCORE 59.6

I'm using a USB-C to HDMI adapter (using the DisplayPort over USB standard, not an older DisplayLink type) to use an external display on the Yoga 730 and it has issues when running as 2 separate displays (everything works fine when mirroring or using only the external display). If you set the graphics settings to "extend these displays" the Windows 10 shell seems to wedge itself (can interact with already running apps, but cannot start new apps or use the taskbar/start menu) and the bottom of each display flickers (looks like a flickering ghost taskbar). I don't suspect a hardware issue with the adapter because it works perfectly in mirroring or single-display mode; instead I suspect a graphics driver bug. Others that use this adapter on other PCs have no problems. I'd love to try a newer version of the Intel 620 graphics driver but it won't install (it says it's incompatible with this system and to contact the computer manufacturer)... Lenovo's customized version of the driver is 4 months old. I have all the latest drivers installed via Lenovo Vantage, Intel's web interface (it only installed newer Wifi and Bluetooth drivers), and Windows Update. The laptop is running Windows 10 1803 17134.112 (2018 Creator's update).

Read other answers
RELEVANCY SCORE 59.6

Hi, I'm surprised I cant reach 4K resolution on Yoga 900s connected to 4K TV? Why? I'm using USB-C to HDMI adapter. What should I do to get 4K? I can get only 1080p on TV as a main display.On clone display mode resolution is set to 4K but in fact in TV is 1080p. 

Read other answers
RELEVANCY SCORE 59.6

Hi all,This morning my yoga pro 3 doesnt detect my external display :Win 8.1/64Classic shell installed When i try right click on the desktop screen resolution : only one display is shown.  - tried 2 different monitors, 2 different HDI cables : no result- tried removing/updating intel HD graphics 5300 driver update (now v 20.19.15.4352) : no result  Tried the monitors & cables on another laptop (samsung 9000) : works fine.Sound thru HDMI works fine. any ideas ?

Read other answers