Over 1 million tech questions and answers.

Random BSOD... Help please (BSOD dump & system health report attached)

Q: Random BSOD... Help please (BSOD dump & system health report attached)

Hello. I am experiencing some random BSODs. It happens no matter what program is running. It could be in a game, surfing the internet, or listening to music. It is very random. Happens about once every two days on average. Some days are worse.

I have tried running driver verifier, but it would still only bsod occasionally, except it would bsod on startup instead of being in the desktop and getting a bsod.

I have also ran memtest x86 a few times and found no errors.

My windows 7 is:
-x64 bit Professional Edition
-Original OS installed on my system (I built the system)
-Full retail.
-Built my system over the summer. Been getting occassional BSODs ever since.
-OS installation is about 4 months old.

And if this helps, My system parts are:
-Intel i7 860
-EVGA P55 LE motherboard (using onboard audio as well)
-EVGA gtx 470
-Adata G-Series DDR3 1600mhz ram (2x2gb)
-some low-end hitachi 750gb hard drive
-Thermaltake Toughpower XT 775 watt.

Yes I have installed all the latest drivers from all the manufaturers' websites.

I have also attached a BSOD dump and system health report.

Please and thank you for your help.

RELEVANCY SCORE 200
Preferred Solution: Random BSOD... Help please (BSOD dump & system health report attached)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Random BSOD... Help please (BSOD dump & system health report attached)

Welcome to SF.

Like you indicated, you have the latest video driver.

However, your network and wireless network drivers need updating.

Marvell Yukon:
Driver c:\windows\system32\drivers\yk62x64.sys (11.10.6.3, 384.00 KB (393,216 bytes), 6/15/2009 2:10 AM)

D-Link Adapter:
Driver c:\windows\system32\drivers\athrx.sys (8.0.0.238, 1.47 MB (1,542,656 bytes), 10/5/2009 4:34 PM)






Quote:
Followup: memory_corruption
---------

4: kd> !analyze -v;r;kv;lmtn;lmtsmn
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000024, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000348856f, address which referenced memory


Most likely driver-related.

Still, run memtest86+ and let it go through at least six passes.

Finally, uninstall McAfee or Norton and replace it with MSE.

Read other 7 answers
RELEVANCY SCORE 123.6

My HP Pavilion dv7 is a little over a year old. Original OS was OES, but I had to reinstall it a few months ago and it was fine for a while. Now BSoD is back again, almost daily. Complete computer info was provided when I registered for this forum, but I'd be happy to provide it again.

Zipped NT6 and System Health check files are attached.

Here is the BSOD info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 000000000000001C
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF88001A9F87E
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Here is the info from the Event Viewer on the Critical Event that occurred today.

System

- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}



EventID 41


Version 2


Level 1


Task ... Read more

A:BSOD - BCcode d1, system health report and NT6_BSOD files attached

Crashes Related to KmxAMRT.sys Antivirus File System Filter Driver for XP/2003 from Computer Associates. For XP/2003 NOT for win 7. Needs to be removed and replaced at least to test.

Microsoft Security Essentials - Free Antivirus for Windows

Read other 6 answers
RELEVANCY SCORE 102.4

I recently built a new system from scratch and all was fine for a couple days; now I get the BSOD randomly. I know where the dump files are located but I unfortunately don't know how to read them correctly. As requested I've attached the TSF_Vista_Support + system health report to the tread if anyone could lend a hand. If anyone could provide some insight as to why I'm getting these random BSOD's I'd greatly appreciate it.



Here's the specs on the system:

OS: Windows 7 Ultimate 64 bit

Ultra LSP 750 watt PSU

AMD Phenom II 955

OCZ AMD Black Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600

MSI NF980-G65 AM3 NVIDIA nForce 980a SLI HDMI ATX AMD Motherboard

EVGA 01G-P3-1158-TR GeForce GTS 250

LG 22X DVD?R DVD Burner Black IDE Model GH22NP20

Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader w/ USB port

A:BSOD TSF_Vista_Support + system health report

The first thing that I can suggest is to get some more memory.
Your system report shows 1.87G of physical memory.
It also shows 1.87G of pagefile space.

You need at least 2G of physical and 3G of pagefile to run W7 in any sort of efficient manner.

I only looked at a couple of the BSOD logs and didn't post the results
because they pointed me to this as a potential cause.

Please run this as it may point out another possible issue as well.
http://www.microsoft.com/windows/win...e-advisor.aspx

Read other 7 answers
RELEVANCY SCORE 101.2

I am having periodic BSODs all of a sudden. I have attempted to debug the problem and have downloaded new MB and Video Card Drivers but all that seems to have changed is some info in the dump file.

Second issue is in gathering the information to post here.

I am experiencing problems with getting step 3 done with the Resource and Performance Monitor. When i run it i get...


Code:
The wait for the report generation tool to finish has timed out.
A solution i read online was to boot up with no services running so i did so and the outcome was...


Code:
The system cannot find the path specified.
Attached is a zip of the information i was able to retrieve.

A:BSOD Error and Issues with System Health Report

  
Quote: Originally Posted by Worsin


I am having periodic BSODs all of a sudden. I have attempted to debug the problem and have downloaded new MB and Video Card Drivers but all that seems to have changed is some info in the dump file.

Second issue is in gathering the information to post here.

I am experiencing problems with getting step 3 done with the Resource and Performance Monitor. When i run it i get...


Code:
The wait for the report generation tool to finish has timed out.
A solution i read online was to boot up with no services running so i did so and the outcome was...


Code:
The system cannot find the path specified.
Attached is a zip of the information i was able to retrieve.



Before we can ascertain the true cause you need to:
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

2-Update to SP-1. Run the update readiness tool then update.
* Download > Install > Run the System Update Readiness Tool

Ensure yo... Read more

Read other 5 answers
RELEVANCY SCORE 97.2

Hello everyone. I am a newbie here and really need some help. I have a few dump files attached and was able to open them in debugger but don't truly understand what it could mean. If anyone could please take a look at them and tell me if it is a hardware issue that would be great.

I have tried chkdsk, CPU stress test, GPU stress test, Power supply stress test, and RAM test, all passed.

Any help would be greatly appreciated.

Thanks in advance.

A:BSOD during random times, dump files attached

Welcome aboard.

Code:
fffff880`0937ae58 fffff800`032fdda4 nt!RtlSplay+0x2
fffff880`0937ae60 fffff880`017070b4 Ntfs!NtfsAllocateMftRecord
fffff880`0937ae68 fffff800`03256000 nt!KiSelectNextThread <PERF> (nt+0x0)
fffff880`0937ae70 fffff800`034dd000 nt!BBTBuffer <PERF> (nt+0x287000)
fffff880`0937ae78 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937ae80 fffff880`016b2b34 Ntfs!__PchSym_ <PERF> (Ntfs+0x69b34)
fffff880`0937ae88 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937ae90 fffff880`016b2b64 Ntfs!__PchSym_ <PERF> (Ntfs+0x69b64)
fffff880`0937ae98 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937aea0 fffff880`016b2d98 Ntfs!__PchSym_ <PERF> (Ntfs+0x69d98)
fffff880`0937aea8 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937aeb0 fffff880`016b26fc Ntfs!__PchSym_ <PERF> (Ntfs+0x696fc)
fffff880`0937aeb8 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937aec0 fffff880`016af684 Ntfs!__PchSym_ <PERF> (Ntfs+0x66684)
In this situation, you should check the discs.
Re-seat the sata and power.
Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests&qu... Read more

Read other 1 answers
RELEVANCY SCORE 97.2

For about a week I've been experiencing random BSODs, after about 4 months of stable performance. There are no recent hardware or software changes that I'm aware of. The crashes are truly random, sometimes it will go 2 days without a crash, and then the next day I will get 2 or 3 crashes in an hour. It doesn't seem to correlate with a particular program or device attached.

For some reason, my System Restore had been turned off so I have no way of restoring to an earlier point prior before the crashes (I have since corrected this but that doesn't help me). I do however backup the system regularly with Acronis Backup, and if I can't solve this I'll have to restore to a prior Acronis backup.

Here is my OS info (for full system specs click on My System Specs at bottom left of post):

- x64
- the original installed OS on the system? NO.
- Full retail version (Ultimate)
- What is the age of system (hardware)? LESS THAN 6 MONTHS.
- What is the age of OS installation (have you re-installed the OS?) LESS THAN 6 MONTHS.
I FORMATTED AND REINSTALLED ULTIMATE FROM THE STOCK OEM ONCE.

The attached dump will show 6 crashes. I am only concerned with the recent ones that happened in May. Any help in figuring out the cause would be much appreciated!

A:Random BSOD, error 0x0000010d (dump attached)

bump

Read other 4 answers
RELEVANCY SCORE 97.2

Hello computer crashes event viewer always says kernel power event id 41. bugcheckcode as 78 last time this time 25. Here is the last dump file. Also attached zip folder of another crash. Thanks in advance for any help.

Read other answers
RELEVANCY SCORE 96

Attachment 345995

Can someone help with this minidump file? I tried to install the windbg.exe tool, but couldn't figure it out. I pieced together this computer within the last year, and I suspect something is up with the motherboard, but not sure: ASUS Z97 MB

A:BSOD waking from sleep, and random - dump file attached

Another crash just now, when waking from sleep state.

Read other 2 answers
RELEVANCY SCORE 96

hi all

im new here. i was hoping somebody could assist with my mulitple bsod dilema, i have attched the collection files as per instructions . the machine is a hp 820 g1 laptop running windows 7 enterprise.
the machine was imaged from a corporate image.

i have also attached a image showing what blue screen viewer shows

any help appreciated. i hope i have posted in correct manner

A:Random multiple bsod dump file attached require help hp 820 g1

Hey and welcome to SevenForums!


Code:
BugCheck 1E, {ffffffffc0000005, fffff80002eb2b0e, 0, ffffffffffffffff}

Probably caused by : memory_corruption ( nt!MiSelectImageBase+3ca )
Run MemTest86+ for 8 passes.

RAM - Test with Memtest86+

Read other 7 answers
RELEVANCY SCORE 90.8

i have windows 7 home premium x64. i installed from disk 2 days ago. my pc is about 3 days old i built it myself. i am getting BSOD at least twice a day i got the error message 'system service exception' i have attached the mini dump files. thanks scott

A:BSOD error code system service exception (attached mini dump)

i have just had another BSOD with error code 'driver-irql-not-less-or-equal. dump files attached

Read other 2 answers
RELEVANCY SCORE 86.8

additional info :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002A5501E
BCP3: FFFFF88006792E20
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

A:new system..random BSOD (dump dile included)

  
Quote: Originally Posted by gamepoint


additional info :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002A5501E
BCP3: FFFFF88006792E20
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


This was probably caused by your Itunes.

Ii would re-install it
also run a system file check
type cmd in search>right click and run as admin>sfc /scannow

If you are overclocking stop

Let us know the results
Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\021110-20280-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a19000 PsLoadedModuleList = 0xfffff800`02c56e50
Debug session time: Wed Feb 10 11:02:52.223 2010 (GMT-5)
System Uptime: 0 days 4:19:43.907
Loading Kernel Symbols
...............................................................
................................. Read more

Read other 2 answers
RELEVANCY SCORE 86.8

additional info :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002A5501E
BCP3: FFFFF88006792E20
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

A:new system..random BSOD (dump dile included)

  
Quote: Originally Posted by gamepoint


additional info :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002A5501E
BCP3: FFFFF88006792E20
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


Hello, Welcome to SF,

I guess on of the System service has caused the issue. Also iTunes has also caused the crash. Try to uninstall it and see whether that makes any difference. If your Overclocking please stop it. Make sure your BIOS firmeware is up to date. If your using any third party antivirus / Firewall uninstall it.

Run the Memory Diagnostic & HD Diagnostic

Also i would recommend to run System Integrity Checker
Start > Run > CMD >Right Click and Run as administrator > SFC/ SCANNOW

Drivers to be updated


Code:
bcmwl664.sys Thu Oct 23 06:11:31 2008
Bugcheck Analysis

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a syst... Read more

Read other 2 answers
RELEVANCY SCORE 86.8

Hi guys, can anyone please help my problem, I had my PC crashing almost everyday, and several times a day. Please find my attached collection of memory dump & PC Health report.

Thanks very much!

I am on Windows 7 Ultimate x64
- x64
- the original installed OS on the system - Ultimate
- an OEM or full retail version? - OEM
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? - newly bought less than 2 months
- What is the age of OS installation (have you re-installed the OS?) Did reinstalled.

A:Frequent crashes (BSOD) on the new PC with BSOD Dump attached

95% of the crashes are memory corruption. Let's start off by testing the memory

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Jan 25 15:54:34.955 2012 (UTC - 5:00)
System Uptime: 0 days 0:13:31.782
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
BUGCHECK_STR: 0x4E_99
PROCESS_NAME: TrustedInstall
FAILURE_BUCKET_ID: X64_0x4E_99_nt!MiBadShareCount+4c
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 24 18:14:49.901 2012 (UTC - 5:00)
System Uptime: 0 days 0:01:11.118
Probably caused by : memory_corruption ( nt!MiGetTopLevelPfn+65 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x3B
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!MiGetTopLevelPfn+65
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 24 18:13:01.962 2012 (UTC - 5:00)
System Uptime: 0 days 0:06:29.179
*** WARNING: Unable to verify timestamp for win32k.sys
*... Read more

Read other 9 answers
RELEVANCY SCORE 82.8

Hey guys, been awhile since i been here but im back sadly and worried...So ima explain best i can what i did that maybe caused the BSOD. First off my cpu is OC but barely and no voltage changes and has been that way for 3 or so months. By default it runs at 3.8Ghz and i just OC it to 4.0Ghz and its been running that way fine for months and its made to be OC way more so i highly doubt its that.

2nd. I do have dameon tools and i see alot of ppl say that can cause it but again, its been on pc 4 ever and never had no issues with it and it rarely gets used but it still does get used here and there.

3rd. I installed some codecs yesterday to try to get sony vegas to read a video and i probably installed 3 different codecs and some were named the same and it was the coded for a h264 or something like that, i already uninstalled that.

4th. No major changes have been made to pc, no recent windows updates, program installs or nothing has been done. Only thing i did most recently yesterday was upgraded a widget for reading GPU and its called GPU meter.

5th. Finally and im scared this might be the issue is i noticed on sony vegas ( video editing program ) that it likes to max out all my cores and i noticed the temps reached 90-94 on my cpu which really scared me but ive only used this program twice but i was thinking maybe it was damaging my cpu but not sure.

The last thing i was doing when it BSOD was i had a video uploading to facebook and firefox was open and a little dialoge b... Read more

A:Random Blue Screen for no reason today, dump and system report inside.

I forgot to mention this PC is a new build kinda, only bout 4-5 months old also and only virus scan i have installed is Microsoft security Essientionals or how ever u spell that, no other virus/spyware software installed.

Read other 5 answers
RELEVANCY SCORE 82.4

I just wanted to know if MS removed the system health report feature from performance monitor.
If so how do you start a system health report in Windows 10, it seems to differ from Windows 7
where you can find in advanced tools "Generate a system health report" ? Thanks!

Read other answers
RELEVANCY SCORE 81.6

Please help with BSOD, DUMP attached

Thanks in advance,

L,

A:Please help with BSOD, DUMP attached

Hi liorlior.

All your latest BSODs are saying this:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 109b, 5090322, fffff8a016075230}

GetPointerFromAddress: unable to read from fffff80002ef7100
GetUlongFromAddress: unable to read from fffff80002ef71c0
Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonCreate+257b )

Followup: MachineOwner
---------
Ntsf is the file system, on the HDD. So it is some issue with the disc subsystem.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"... Read more

Read other 1 answers
RELEVANCY SCORE 81.6

BSODs, various messages. This is all post fresh install on a clean drive. Ran Memtest a couple of times, 7 passes each time, no errors. All drivers are most recent versions (as far as I know, I update regularly) Windows update is up to date. I found a bios update but haven't flashed it yet.
It seems to happen most often when I first fire up the computer, but sometimes randomly after that. Additional previous dumps can be found here : http://www.sevenforums.com/crashes-d...tall-win7.html

Here we go again. Ugh. Help?

A:BSOD (dump attached)

More dumps than staten island. Help?

Read other 8 answers
RELEVANCY SCORE 81.2

I have been having this BSOD from few days ago, I opened my CPU cabinet because my core fan was making noise... it appears suddenly in the middle of anything, sometimes frequent sometimes hours later or none.

Here is the dump file, I can't read it myself because of the win32 error msg by Windbg. Please if someone can figure it and tell me anything helpful.

Thank you.

A:BSOD; memory dump report

Hello Xfact2matty, welcome to SF!

Please post full info as per these instructions:
http://www.sevenforums.com/crashes-d...tructions.html

Also please make sure Windows Updates finishes. Many drivers that should have been, are unclear in this dump.





Quote:
Please go to your Maintenance Center and check the Windows Update status. Make sure you are up to date, do them one by one manually if needed.
For help or reset see: Windows Update - Reset

Read other 2 answers
RELEVANCY SCORE 80.4

Hello, can someone please help me with the following BSOd analysis:

Instant Online Crash Analysis, brought to you by OSR Open Systems Resources, Inc.

Show DivPrimary Analysis

Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (OSR Homepage - OSR)
Online Crash Dump Analysis Service
See OSR Online - The Home Page for Windows Driver Developers for more information
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
Machine Name:
Kernel base = 0xfffff800`0401b000 PsLoadedModuleList = 0xfffff800`04262730
Debug session time: Sat Jun 13 06:07:33.647 2015 (UTC - 4:00)
System Uptime: 0 days 1:34:05.427
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handl... Read more

A:Help with BSOD, dump analysis attached

Please follow the instructions here: Blue Screen of Death (BSOD) Posting Instructions

Read other 3 answers
RELEVANCY SCORE 80.4

Hi,

I'm new here and I seem to can't bring myself to understand the log files. Can someone please have a short Layman's term explanation of what's wrong?

Thanks!

EDIT:
I was suspecting memory at first, so I used MemTest86. Ran 3 passes and no errors. I'm suspecting this could be one of the drivers triggering this.

A:IRQL_NOT_LESS_OR_EQUAL BSOD! Dump attached!

Enable driver Verifier and wait for another crash to happen. http://www.sysnative.com/forums/bsod...ows-vista.html


Code:
lvrs64.sys Tue Oct 23 04:11:24 2012 (5085FCCC)
Logitech Camera driver
http://www.carrona.org/drivers/driver.php?id=lvrs64.sys

lvuvc64.sys Tue Oct 23 04:12:08 2012 (5085FCF8)
Logitech USB Video Class Driver (WebCam)
http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys

L1C63x64.sys Tue Jul 16 08:56:31 2013 (51E4EE9F)
Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
http://www.carrona.org/drivers/driver.php?id=L1C63x64.sys

SYMEVENT64x86.SYS Sat Jul 27 04:26:58 2013 (51F32FF2)
Norton Internet Security
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS

SYMDS64.SYS Wed Jul 31 01:29:08 2013 (51F84C44)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

ccSetx64.sys Tue Sep 24 05:58:04 2013 (52410DCC)
Symantec/ Norton Common Client Settings Driver
http://www.carrona.org/drivers/driver.php?id=ccSetx64.sys

SYMNETS.SYS Thu Feb 13 12:25:14 2014 (52FCAB9A)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=SYMNETS.SYS

SYMEFA64.SYS Fri Feb 28 00:32:07 2014 (530FCAF7)
Symantec Extended File Attributes
http://www.carrona.org/drivers/driver.php?id=SYMEFA64.SYS

avmu364.sys Thu Mar 27 06:49:33 ... Read more

Read other 6 answers
RELEVANCY SCORE 80.4

i thought i got rid of the bsod by uninstalling zone alarm pro but it was fine till yesterday ..andf so i put in sygate and after 10 hours i got a bsod.i ran a memtest and after 8 tests it gave me a pass of 8 and errors 0..i also checked the hard drive..even that was fine...is there anything to do with symantec anti virus which i have.....
i have the last threee minidump files.
 

Read other answers
RELEVANCY SCORE 80.4

hello all,

I have installed fresh liggle copy of windows 7 ultimate * 32bit, few

days ago.

tonight with not any change from my side, i begam to get BSOD

randomly.
then the computer rebbots and i'm getting black screen with only the

mouse course moving.

when i log in safe mode - evrything is ok. and then it let me log

normal again until next BSOD.
one of the dump file is attaced.

thanks anyone in adanve for reading and helping about this issue.

A:BSOD problem - dump is attached

  
Quote: Originally Posted by nimrodb


hello all,

I have installed fresh liggle copy of windows 7 ultimate * 32bit, few

days ago.



tonight with not any change from my side, i begam to get BSOD

randomly.
then the computer rebbots and i'm getting black screen with only the

mouse course moving.

when i log in safe mode - evrything is ok. and then it let me log

normal again until next BSOD.
one of the dump file is attaced.

thanks anyone in adanve for reading and helping about this issue.


Hello !! Welcome to SF !!

I don't see the Dump file attachment please attach it again !!

- Captain

Read other 5 answers
RELEVANCY SCORE 80.4

EDIT 9/6/10

Thanks for the help guys. I found out the problem and my machine is faster than ever booting up and loading now. It was my power supply that was crapping out on me. I had an exact same model I bought about 1 1/2 years ago and I compared the two and the newer one I had was so crappy, they changed the quality over the years. It was lighter and the wires felt cheap, no wonder it went from 60 to 29.99 :[ oh well thanks though guys.

A:BSOD, Mini Dump Attached. Help?

Hi and Welcome back!

The results from the DMP files do not give a definitive answer. While we investigate further here are a few things that you can do.

1-Run a system file check to verify and repair you system files. You do this by typing cmd in search, then right click and run as admin. SFC /SCANNOW

2. I still suggest that this somehow still related to RAM issue, or bad mobo, but let's get to that later.

3-Event viewer
Go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.

When you find them please note the event ID, and the source codes and tell us what they are.

4-Device manager
Please go to start>search>type device manager.
Are there any "unknown devices" with yellow triangles on them?
Is you driver there , listed, and working?

If y our driver is missing, or there is a yellow triangle on it, you will need to update it.

5-Driver verifier
please run Verifier with these settings:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the regi... Read more

Read other 9 answers
RELEVANCY SCORE 80.4

Hi Everyone,

Attached you can find my latest 3 dump files.

I've been dealing with the problem for awhile now and I'm hoping someone on here will be kind enough to help me out.

I get a random BSOD every so often (about one a day). It doesn't matter what I am doing. I can be either playing a game or doing nothing and the computer will BSOD for whatever reason.

I've done memory checks and the RAM seems to be fine.

Also, here is the output from WinDbg for my last crash dump:






Quote:

Loading Dump File [C:\Windows\Minidump\041810-17015-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a4d000 PsLoadedModuleList = 0xfffff800`02c8ae50
Debug session time: Sun Apr 18 03:08:53.812 2010 (UTC - 7:00)
System Uptime: 0 days 5:14:18.069
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************************************... Read more

A:Frequest BSOD Dump Attached

Ugh, it just happened again.

Read other 8 answers
RELEVANCY SCORE 80.4

HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - could it have somthing to do with grapic card or sound card ? Im lost Any ideas greatly appriciated - info--
BC code 124 124 124
BCP1 00000000 00000000 00000000
BCP2 85CB001C 861C58FC 86DD2024
BCP3 B2000000 00000000 00000000
BCP4 00000800 00000000 00000000
THATS THE 3 LOGS I RECORDED
I have a g force 8400 gs - 3 gigs of ram
I saved a memory dump folder but it is 46mb so i have upoaded to RS RapidShare: 1-CLICK Web hosting - Easy Filehosting thanks in advace for any help

A:Bsod code 124 dump attached

  
Quote: Originally Posted by sepholdem


HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - could it have somthing to do with grapic card or sound card ? Im lost Any ideas greatly appriciated - info--
BC code 124 124 124
BCP1 00000000 00000000 00000000
BCP2 85CB001C 861C58FC 86DD2024
BCP3 B2000000 00000000 00000000
BCP4 00000800 00000000 00000000
THATS THE 3 LOGS I RECORDED
I have a g force 8400 gs - 3 gigs of ram
I saved a memory dump folder but it is 46mb so i have upoaded to RS RapidShare: 1-CLICK Web hosting - Easy Filehosting thanks in advace for any help



Hi and welcome

The DMP file on RS is corrupt. Use these too help and fix your problem. http://www.sevenforums.com/crash-loc...-what-try.html

Let us know the result]

Ken

Read other 1 answers
RELEVANCY SCORE 80.4

Good morning....

Is Windows 7 . . .
- x64
- the original installed OS on the system? Original
- an OEM or full retail version? OEM

- What is the age of system (hardware)? Purchased Spring, 2011
- What is the age of OS installation (have you re-installed the OS?) New hard drive, OS installed 1/2/12

A:BSOD dump archive attached

I believe the issue has to do with my video, as each BSOD occurred while either gaming or streaming video. If anyone could take a look and see if each BSOD has the same root cause I'd be grateful! Thanks!

Read other 4 answers
RELEVANCY SCORE 80.4

Hey folks,
My machine is blue screening daily. could someone read the dump file for me to help track down the culprit of the issue? I have attached the dump. thanks for the help!

A:Daily BSOD (dump attached)

BSOD caused by the Intel network card device driver
Update it in safemode with networking Intel? Driver Update Utility


Code:
BugCheck 9F, {3, fffffa80079e1a20, fffff80000ba2748, fffffa800d0d4590}

*** WARNING: Unable to verify timestamp for e1k62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k62x64.sys
Probably caused by : e1k62x64.sys

Read other 1 answers
RELEVANCY SCORE 80.4

A new BSOD, wonder whatever could be wrong this time...I just clicked a link on Firefox to watch a Youtube video when it happened.

A:New BSOD Dump file attached

Dump reports error code 0x50 BSOD Index bit of info/causes for you

I would run memtest to check ram Memtest86+ - Advanced Memory Diagnostic Tool
HDD diagnostic HD Diagnostic
System file scan, start>cmd.exe>right click run as admin>type sfc /scannow
Check bios is upto date
If necessary remove AV

Found this old driver on your system
RTCore64.sys Wed May 25 07:39:12 2005, i would update it or remove it, i think it is either part of EVGA Exclusive Precision Overclocking tool/utility or a part of Riva Tuner software

Hope this helps


P.S. If you have anymore problems or BSODs please post back to the same thread and not a new one

Read other 1 answers
RELEVANCY SCORE 80.4

from past 1 month this bsod has started again.. don't know why..
plz help

A:BSOD....dump files attached

Pretty simple, AVG appears to be causing it. Please remove it with this tool: http://download.avg.com/filedir/util...avgremover.exe

Install MSE instead (also free): http://www.microsoft.com/security_essentials


...Summary of the Dumps:
Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 00:09:25.956 2010 (UTC - 4:00)
System Uptime: 0 days 1:00:17.063
BUGCHECK_STR: 0x4E_99
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Aug 15 23:21:45.877 2010 (UTC - 4:00)
System Uptime: 0 days 0:07:37.984
BUGCHECK_STR: 0x1a_3452
PROCESS_NAME: avgcsrvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Aug 12 02:32:54.531 2010 (UTC - 4:00)
System Uptime: 0 days 1:05:40.638
BUGCHECK_STR: 0x1a_61940
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon Aug 9 02:53:02.422 2010 (UTC - 4:00)
System Uptime: 0 days 4:03:04.530
BugCheck A, {c0019078, 0, 0, 828c561e}
Probably caused by : memory_corruption ( nt!MiEmptyWorkingSet+16f )
BUGCHECK_STR: 0xA
PROCESS_NAME: avgchsvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: ... Read more

Read other 1 answers
RELEVANCY SCORE 80.4

Hi, Im new to win8. Today I got a bsod... I'm attaching the dump file.. Plz help..

Thanks...

A:New BSOD... Crash Dump attached.. help...

No Windows Updates installed. Most systems have at least 30 or 40. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Cyberlink drivers date from 2010 - please uninstall the program.

Please update these older drivers. Links are included to assist in looking up the source of the drivers... Read more

Read other 6 answers
RELEVANCY SCORE 80.4

I keep getting a BSOD on my laptop and it stays for about a second and then the system restarts.

can some one please identify the problem, I have attached the .dmp and the .xml file along with a .txt file

Thankyou

A:BSOD - Dump file attached

Hi there!It is rather hard to read a DUMP file and a long XML file. Next time, please paraphrase the text that you saw from the error message and write down the error number and display it here! It was not impossible to read the file. I found some information to help you.From what I read, you have a Dell laptop with an Intel Pentium M Processor 1.6 GHz, right? (Developer info: Model 13 Stepping 8)Now from what I saw:*** STOP: 0x0000009C (0x00000003,0x80545FF0,0xB2000000,0x0002010A)"MACHINE_CHECK_EXCEPTION" -- happens when processors report uncertain information to the system log.Microsoft Support: Error article 0x9CMicrosoft Support: Understanding and troubleshooting 0x0000009C errorsHelp from Microsoft on troubleshooting errors in hardware/softwareThis error is uncommon, and happens rarely. I have tried many times to help get a resolution from my database, but there is no information in the database.NEW RESOLUTION FOR ERROR 0x0000009C-Make sure your drivers are up to date.-Turn off or unplug external hardware before shutting down or restarting your computer. (DEP)-Make sure you have 256 MB RAM or more installed on your computer.Please tell me if you need any help with the resolution!

Read other 15 answers
RELEVANCY SCORE 80.4

HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - voltage is fine. ran mem test 5 times ok.
I feel that it has somthing to do with the driver i installed for the 8400GS card as i see some people using lap top drivers from different sites -
ANY HELP IS WELCOME

A:BSOD 124 code please help DUmp attached

  
Quote: Originally Posted by sepholdem


HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - voltage is fine. ran mem test 5 times ok.
I feel that it has somthing to do with the driver i installed for the 8400GS card as i see some people using lap top drivers from different sites -
ANY HELP IS WELCOME


Hello Welcome to SF,

Follow this article this should help you http://www.sevenforums.com/crash-loc...-what-try.html

Good Luck,
Captain

Read other 7 answers
RELEVANCY SCORE 80.4

Hi,

My new laptop recently got the BSOD, it's happened a couple of times but I didn't get a dump file until now as they weren't set to save.

Hope someone can help.

Cheers.
 

A:Windows 7 BSOD (w/ dump attached)

BAD_POOL_CALLER
Ndis.sys
This points to a network driver or a memory issue
 

Read other 5 answers
RELEVANCY SCORE 79.6

For the past week or so I have been getting the BSOD, sometimes multiple times a day, when I'm actively using my computer and have also opened it back up to find them after I've been at work, I have tried everything I can think of to figure out what the problem is but it is beyond my skills, so I am hoping someone here might be able to help me out. I have attached the dump files to this post. I appreciate any guidance you can offer, thanks!

Read other answers
RELEVANCY SCORE 79.6

Hi guys can you have a look at my mini dump please i keep getting random crash's but have no idea whats causing it.

Cheers

A:Windows 7 BSOD (Mini Dump attached)

It looks to me that it's associated with your Authentium protection program (amp.sys).
But it could also be an issue with your Silicon Image driver - comes with package for the SIxxxx drivers (controls the hard drives).

But, to add to your problems, there's these other BSOD causing issues:
- the ASACPI.sys driver dated from 2004
- the Speedfan drivers dated from 1996 and 2006
- numerous other drivers that are over 2 years old

So, please do this:
1 -




Quote:
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the Authentium product from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of Authentium using this free tool: Authentium: What Safe Feels Like
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's


2 - Download the 32 bit Windows 7 driver from this link: Silicon Image - Support | Search Results
- Uninstall the current drivers
- Install the freshly downloaded drivers

3 - Go to this link: ASUSTeK Computer Inc.-Support-
- enter your system info and then specify Windows 7 (32 bit)
- scroll down to the Utilities section and download the Asus ATK0110 ACPI Utility driver and install it
NOTE: This is a known cause of BSOD's and must be updated.

4 - Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the... Read more

Read other 1 answers
RELEVANCY SCORE 79.6

Hello,

This is my first post, so if I forgot to do something or did it incorrectly, feel free to let me know.

I bought an HP Pavillion last August, and it came with Windows Vista, and the promise that I would get a free upgrade to Windows 7 when it came out. After going through a fair amount of headaches and red-tape, I finally got my upgrade disc. I upgraded my OS last Monday. I was given instructions to remove anti-virus software (which was preventing installation), and I was also told that iTunes and my keyboard may cause issues upon upgrade. I figured this just meant that they might not perform as well, so I ignored it and continued with the upgrade.

The first time I booted up Windows 7, I got a BSOD within seconds after my desktop loaded completely. Sometimes I will get a few minutes (one time, I even got about an hour or so) before the BSOD hits. I was able to uninstall iTunes, and run Blue Screen Viewer. Blue Screen Viewer told me that it was likely that my ntoskrnl.exe was causing the problem. After researching ntoskrnl.exe, I found out that it is sometimes caused by keyboard driver issues, but I can't be sure that is the problem.

If anyone thinks it will help, I can post the exact text of my BSOD. However, since I was unsure if I needed to do so, I opted to include the mini-dump files for now. I can also say that the BSOD always includes the text "SYSTEM_SERVICE_EXCEPTION."

I would like to resolve this problem without losing my current data (I was fool... Read more

A:BSOD upon start-up, mini-dump attached

  
Quote: Originally Posted by cobbljock


Hello,

This is my first post, so if I forgot to do something or did it incorrectly, feel free to let me know.

I bought an HP Pavillion last August, and it came with Windows Vista, and the promise that I would get a free upgrade to Windows 7 when it came out. After going through a fair amount of headaches and red-tape, I finally got my upgrade disc. I upgraded my OS last Monday. I was given instructions to remove anti-virus software (which was preventing installation), and I was also told that iTunes and my keyboard may cause issues upon upgrade. I figured this just meant that they might not perform as well, so I ignored it and continued with the upgrade.

The first time I booted up Windows 7, I got a BSOD within seconds after my desktop loaded completely. Sometimes I will get a few minutes (one time, I even got about an hour or so) before the BSOD hits. I was able to uninstall iTunes, and run Blue Screen Viewer. Blue Screen Viewer told me that it was likely that my ntoskrnl.exe was causing the problem. After researching ntoskrnl.exe, I found out that it is sometimes caused by keyboard driver issues, but I can't be sure that is the problem.

If anyone thinks it will help, I can post the exact text of my BSOD. However, since I was unsure if I needed to do so, I opted to include the mini-dump files for now. I can also say that the BSOD always includes the text "SYSTEM_SERVICE_EXCEPTION."

I wo... Read more

Read other 5 answers
RELEVANCY SCORE 79.6

Hello, I keep getting a BSOD error. I don't know what is the cause so I am putting the dump up here and hopefully someone can help me find the cause.

A:BSOD Crashing/dump files attached

Here is my pc specs as well:

Sony VAIO Notebook
AMD ATHLON(tm) II P320 Dual-Core Processor 2.10 GHz
4GB RAM
64-bit Operating System
Windows 7 Home Premium
Service Pack 1

Read other 1 answers
RELEVANCY SCORE 79.6

Not sure what in the world is going on, had my pc about a week seemed to be working fine, then all of a sudden it starts getting the BSOD whenever I opened anything including steam, google chrome and windows update.
I managed to do a system restore and it has been stable-ish so far still crashes occasionally with the same BSOD screen I would really like to fix it, I have used windows update an updated everything.
I have attached the minidump file any help would be greatly appreciated

A:BSOD error 0x0000010d (dump attached)

also for whatever reason, my computer is running extremely slow the processor usage idles on 70 - 80% since i used the windows update/some updates won't even download.

im running a
gtx 560
i3 2100
8gb ram

Was running lightning quick before this, I save everything to an external hard drive. like i said only had the computer a week now its running like sh*t since the windows update

Read other 2 answers
RELEVANCY SCORE 79.6

Hi

I have been given a laptop that has never worked correctly. It's pretty much unused, but crashes soon after booting. I have run a CHKDSK and no errors were found.

The dump files are attached - any help will be much appreciated.

A:BSOD soon after boot. Dump files attached.

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
Stop 0x50, Ntfs

Read other 9 answers
RELEVANCY SCORE 79.6

Hi,
I keep getting BSOD while using google chrome. I have attached dumps for your reference. I guess I need to upgrade my drivers but don't know which one. It would be great if someone can point a way to get rid of this BSOD. Currently I am using firefox as a workaround. But I love to use chrome.

Thanks,
Esen.

A:BSOD on using google chrome, dump attached

Nothing really conclusive from these crashdumps. They're all over the place.

I recommend turning on Driver Verifier. Do not select the following checks: Force Pending I/O Requests, IRP Logging, and Low Resource Sim. Select all other checks. Make sure to restart system after you finish setup. If you experience a boot loop afterwards, go into Safe Mode by pressing F8 prior to Windows logo and disable DV there. Provide us any new crashdumps.

Read other 4 answers
RELEVANCY SCORE 79.6

Hi,

I've finally given up and looking to windows 10 experts to help :(

I randomly receive BSOD caused by tcpip.sys (so it says). For instance, i received one 10 minutes ago after waking up in the morning (5.30am AEST), turning my monitor on, pressing 'enter' to log on, and as soon as windows started loading after typing my pin code, it BSOD'd me.

I've used Bluescreen view that says its tcpip.sys related, but i have updated to the latest drivers on my ethernet ports. (my asrock z87 extreme 6 motherboard has 2 ethernet ports). The error can and does occur whichever ethernet port is being used, but just in case i keep one disabled.

Thanks, hope someone can help!!

A:BAD_POOL_HEADER BSOD, Dump File attached

Hi Groggubus,

Welcome to the 10forums

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please follow this suggestion for the BSOD
Please open BitDefender and go to the modules,Go to the firewall settings,Uncheck 'Block port scans in the network',Reboot your system <-- IMPORTANT

Read other 2 answers
RELEVANCY SCORE 79.6

Hi Thanks is advance again for the help!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2011-02-03T23:13:02.196824000Z" />

<EventRecordID>105507</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>Chrissy-PC</Computer>

<Security UserID="S-1-5-18" />

</System>


- <EventData>
<Data Name="BugcheckCode">209</Data>

<Data Name="BugcheckParameter1">0x44</Data>

<Data Name="BugcheckParameter2">0x2</Data>

<Data Name="BugcheckParameter3">0x0</Data>

<Data Name="BugcheckParameter4">0xfffff88003cd28c1</Data>

<Data Name="SleepInProgress">false</Data>

<Data Name="PowerButtonTimestamp">0</Data>

</EventData>


</Event>

A:BSOD again.....attached mini dump this time

Source of the crash is the Atheros wireless lan driver apparently.

Hopefully you can find a updated driver for the device, the one you are using appears to be faulty.
http://www.atheros.cz/

Edit: I also notice you have AVG, you could try disabling it and see if that helps to. With some system configurations AVG has been known to cause bsod's.

Read other 9 answers
RELEVANCY SCORE 79.6

Hey guys,

I hope someone can help me. I got some dump files from a client's computer i built a few months ago. Its a brand new build, modern hardware, windows 7 pro.

Never had an issue with it when i was building it. now about every 2-3 weeks it gets a BSOD. Since it is a client machine, i dont know when it happens or how it happens or why. All i have with me is the mini dump files.

can someone take a look at it for me? Thanks

Specs:

EVGA H55 Mobo
Intel Core i3
no video card - uses the new onboard chip rendering on the i3
4 gb ram 1033
430W PSU Antec
 

A:Win 7 Pro x64 BSOD, can't figure it out, dump files attached

F.Y.I. the mods will most likely move this to the BSOD forum.

I read the first five minidumps of Zip1 and the first four are the same error code of 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

All four specifically cited corrupted memory as the issue. You'll need to run Memtest for a minimum of 7 Passes (the more the better) unless you start receiving errors before hand. If so then run it per stick. Any errors and that memory stick needs to be replaced.


*** If Memtest shows no errors then find the voltage specs of your RAM and compare it to the voltage setting in your BIOS. Do they match?
 

Read other 9 answers
RELEVANCY SCORE 79.6

For the past couple weeks I have been getting the BSOD, sometimes multiple times a day, when I'm actively using my computer and have also opened it back up to find them after I've been at work, I have tried everything I can think of to figure out what the problem is but it is beyond my skills, so I am hoping someone here might be able to help me out. I have run my anti-virus as well as malwarebytes and they both finish up clean. I have attached the dump files to this post. I appreciate any guidance you can offer, thanks!

I am running Windows 7 Home Premium 64 bit on a Toshiba Satellite L755 laptop
 

Read other answers
RELEVANCY SCORE 79.6

I have been getting many bsods recently, and the main one is IRQL_NOT_LESS_OR_EQUAL. I don't always get it immediately upon booting up, most of the time its during the playing of a game. I have ran memtest and my results came back within an hour saying no errors. Here is what the dump file says:Microsoft ® Windows Debugger Version 10.0.10586.567 X86Copyright © Microsoft Corporation. All rights reserved.
 

Code:
Loading Dump File [C:\Windows\Minidump\032016-4296-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 10 Kernel Version 10586 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 10586.162.amd64fre.th2_release_sec.160223-1728
Machine Name:
Kernel base = 0xfffff802`bbe7b000 PsLoadedModuleList = 0xfffff802`bc159cd0
Debug session time: Sun Mar 20 13:42:04.598 2016 (UTC - 7:00)
System Uptime: 0 days 0:43:18.226
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
..........
*********************************************************************... Read more

Read other answers
RELEVANCY SCORE 79.6

Last 3 crashes had same crash address:
ntoskrnl.exe+735c0
Uploaded zip from DM Log Collector
Need help, please.

A:BSOD 4 times in the last 2 weeks - attached dump

Hi vikmat,

Apologies for the delay, are you still in need of help?

Read other 4 answers