Over 1 million tech questions and answers.

Scrambled Noise At Higher Frequencies

Q: Scrambled Noise At Higher Frequencies

Good day Win7 Community,

This is my first post on here, as many users, I come here because I am having an issue.

I bought my new computer at friday.
I began installing my desired programs and games.
But as I progressed I found out something was going on with my sound.

I own a 5.1 surround sound speaker set so I'd like to use it, I believe I have stereo sound on it right now because I want my speakers to have sound all the time instead of having either music or voice-only.

On to the issue;

At first, I used my audio outputs of my motherboard, but that didn't really work well with my speaker set.
So I got my old 5.1 surround card (PCI) out and installed it into my new computer and plugged my speaker set, I could now use all 5 speakers.

I uninstalled the motherboard sound drivers and installed the sound card ones.
Fiddled with the settings the way I like it (sound volumes on each speaker)

I got it all working.. only, with youtube,WMP,VLC Mediaplyer, whatever produces sound.
When a high frequentie sound comes along, it gets scrambled which really ruins my fun of my new computer.

List of hardware/Software:

Motherboard: ASUS P8H67
Sound Card: Trust SC-5100 5.1 Surround Sound Card

Motherboard Sound Drivers: Realtek High Definition Audio Driver

Sound Card Driver: Trust 5.1 Soundcard 14319

Recap:
I uninstalled Realtek and installed the trust 5.1 sound card drivers.
I tried fiddling with WMP's settings etc. but no luck so far.

I hope someone can assist me in this struggle.

EDIT: It is now occuring 90% of the time on the low-middle frequency.. it's getting on my nerves.

PS. I will be heading off to bed about 5 minutes after this message is posted, it's 4 AM and I've been trying to fix this problem of mine since this morning.

Regards,
BlackMaterial.

RELEVANCY SCORE 200
Preferred Solution: Scrambled Noise At Higher Frequencies

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Scrambled Noise At Higher Frequencies

I know its obvious but did you remember to disable the onboard (motherboard) sound chip in the bios?

Read other 9 answers
RELEVANCY SCORE 65.6

My Windows 8.1 laptop, fitted with an Intel Centrino Ultimate-N 6300 AGN wireless adapter, suddenly stopped automatically connecting to my router a few months ago. I attempted to connect wirelessly to multiple other routers, all to no avail. My laptop could only connect through an ethernet cable/tethered hotspot. I then moved houses and got the internet set up on a new provider and suddenly my laptop could connect wirelessly again! Sadly, after trying to connect to my university's wi-fi, I found out that the laptop wasn't fixed, it was simply able to connect to my new 5Ghz internet but still had trouble connecting to 2.4Ghz access points.

I've tried everything I can to fix this as my laptop is too vital to my studies for me to be without it even for a short period of time, therefore sending it off for diagnostic and repairs is out of the question for now. So far I have tried:

Installing the latest Windows 8.1 drivers for the card (currently on v.15.14.0.2)
Replacing the wireless card with a new one (same make and model)
A complete, fresh re-installation of Windows 8.1

Running out of ideas on what to try and so turning to the community for help. Even if you're not sure of a fix, determining the problem itself would also be a big help. Thanks much in advance!
 

A:Laptop can't connect to 2.4Ghz frequencies, only 5Ghz frequencies

Try the latest wireless driver from the laptop manufacturer's web site.

If that doesn't work then try the latest driver directly from Intel's site.
 

Read other 3 answers
RELEVANCY SCORE 61.6

HI,

trying to figure out what can cause a computer to freeze when it starts off by making a scrambled noise like the sound of a video tape being rewinded or fast fowarded. The video sometimes jumbles before the freeze too, but most of the time, you just get the *rewind* noise and then it freezes. Any suggestions on what this might indicate? Kinda also sounds like an episode of outer limits when they changing frequencies on something to communicate. What could this be related to? In the beginning, it was followed by bsod, but lately, it's been happening more and at shorter intervals with no bsod. mem tests, hard drive tests and stress test check out fine. thanks for any help or suggestions.

A:Scrambled noise like video tape being rewound then Freeze

Do you use a USB wireless adaptor?

Read other 2 answers
RELEVANCY SCORE 51.2

Hello.
I have this new PC:
CPU: I-5 2500 (without the 'k') @ 3.3Ghz
GPU: ASUS GTX 580 direct cu II overclocked to 878 Mhz
Motherboard: Intel DH67CL
RAM: APACER 8GB DDR3 @ 1333 Mhz

I was trying to play Rome: Total War (a game made way back in 2004) at max settings and at 1600x900 resolution (which is the max resolution of my monitor) and I get an average framerate of 20 fps, often even lower. So I checked GPU usage during the game, turns out it never reached 20%. But when I lowered the graphics settings, the fps immediately jumped to 60. As far as I can tell from task manager, there seems to be high CPU usage during gaming, but it doesn't tell how much exactly. So does this mean higher graphics settings require faster CPU clocks and not just a faster GPU? Or does it just mean there's a stability problem with my PC that's affecting its performance?
 

A:Do you need higher CPU speed to play at higher graphics settings in games?

What power supply do you have?
 

Read other 35 answers
RELEVANCY SCORE 51.2

I plan to transfer a JPEG to a CF card to take to Wal-Mart to have 5" x 7" prints made. This JPEG was scanned from a 35mm slide and saved as a TIFF. I saved it further as a JPEG in two sizes: 5332 x 3664 and 980 x 673.

If I were to have two 5 x 7's made, one from the larger JPEG and one from the smaller JPEG, would there be a discernible difference in quality between the prints? How about if I were to have two 4 x 6 prints made? Or two 8 x 10s? Wouldn't I be able to tell the difference more in a larger print? It seems to me, theoretically, that a print made from a 5332 x 3664 file would turn out sharper than one made from a 980 x 673 file. However, if I wouldn't be able to tell the difference, then of course I'd prefer working with the smaller files.
 

A:Does higher resolution (JPEG) result in higher quality prints?

Read other 9 answers
RELEVANCY SCORE 49.6

Hi there,
 
Hope you guys can help with this. Win 7 Ultimate x64. After booting up and working for a while, the keyboard response will slow down (i.e. you type characters and they don't show up on the screen for up to 30 seconds). Same issue with mouse. So I started monitoring the system and discovered that this happens when explorer.exe uses a lot of CPU resources.
 
On boot-up, explorer.exe is using about 0.5% of CPU. But as time goes on and I keep working, it starts to use more and more CPU. Eventually, it can get up to 35-40%. When it gets high, that is when the keyboard/mouse response slows down. So I tried this: I opened a Notepad window while monitoring explorer.exe CPU usage. Then I started typing random characters very fast. When I do this, explorer CPU usage drops to less than 1% and the keyboard response returns to normal. However, when I stop typing, the explorer.exe CPU usage immediately starts to go up again. Eventually, it becomes unmaneagable, and I have to reboot. I tried ending and restarting explorer.exe but it made no difference.
 
It would appear that explorer.exe is running some kind of background task which is consuming much more resources than it should.
 
You Bleeper guys have any good ideas?
 
Thanks a bunch,
Dave

A:Explorer.exe spirals to higher and higher CPU usage

You could try a claen boot to isolate the problem,have you run the disk checker,sometimes fixes this issue.
 
http://support.microsoft.com/kb/2641432/en-gb
 
Clean boot instructions
http://support.microsoft.com/kb/929135

Read other 3 answers
RELEVANCY SCORE 49.6

which in your opinions is better? a higher resolution and lower textures and details or lower resolution, but higher textures and details. the highest resolution i am able to achieve is 1366x768. so nothing past there

A:Higher Resolution or higher texture/detail?

Well to be honest you're making a sacrifice in either scenario.

Is this particular to a game you're playing? If so, what game? If it's a general question I'd have to say higher resolution with lower details etc. because at the very least a higher resolution allows for greater overall detail.

Depending on the game, of course.

Read other 3 answers
RELEVANCY SCORE 47.6

Hi, first of all don't complain about my english, im from sweden -.-
You must try to understand what I'm writing..

I'm using Windows XP Pro..

My Explorer.exe is weird, one day the "memory use" started to increase/grow/getting higher.. Normally it takes around 15mb memory but yesterday it increased slowly to 115 and took 95-100 Cpu (!) I Think that something is wrong but what? Ask if there's something I forgot to tell you.. Didn't write much because I don't know anything more about this..

//Uno!
 

A:Explorer.exe memory use getting higher and higher..

Anyone ?
 

Read other 1 answers
RELEVANCY SCORE 47.2

I've been having a problem recently with my volume on my laptop, a HP M6-1125dx. I have noticed that slowly over the course of a few days I have to keep turning the volume up higher and higher to have the same volume come out of the speakers. I used to consistantly be able to keep my volume around 15, but now I''m having to turn it up to 40 or 50 after a few days. It goes back to normal after a restart though (even a 'soft' restart) and then blows out my ears because either I've forgotten to turn it down before restarting or windows did it to me automatically.
 
Does anyone have any ideas what could be causing this? I have no idea where I should start since I couldn't find info of anyone having a similar problem.

A:Volume slowly decreases forcing higher and higher volume settings until restart

See if reinstalling the audio drivers helps.
 
http://support.hp.com/us-en/product/HP-ENVY-m6-Notebook-PC-series/5296045/model/5312259/drivers
 
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112832-1&cc=us&dlc=en&lc=en&os=4132&productOid=5312259&sw_lang=&product=5312258

Read other 1 answers
RELEVANCY SCORE 45.6

a few months ago I assembled my PC,my Asus z270e board , this MB supports 3000mhz ram frequencies so I went up i was using that XMP profile
But I had problems for playing, crashes, freezes or close alone, in the end i can not play, this happend every 10 -30 min, sometimes when the game started, I thought it was my PC, so I format it, I uploaded and downgraded the version of Windows and nothing too, in the end by discarding I realized that this was the XPM profile.!! now im using the stock frecuencie yesterday, I played 24 hours without crashes everythings OK,!! so if my MB withstands these frequencies of 3kmh. why is it causing me problems?
Processor i7 7700
Mother: Asus Strix z270e gaming
Liquid cooling: NZXT KRAKEN X52
Ram: CORSAIR VENGEANCE LED KIT 2x8 / 16GB
GPU: ASUS STRIX 1070
Sent from my iPhone using Tapatalk
 

Read other answers
RELEVANCY SCORE 45.6

a few months ago I assembled my PC,my Asus z270e board , this MB supports 3000mhz ram frequencies so I went up i was using that XMP profile
But I had problems for playing, crashes, freezes or close alone, in the end i can not play, this happend every 10 -30 min, sometimes when the game started, I thought it was my PC, so I format it, I uploaded and downgraded the version of Windows and nothing too, in the end by discarding I realized that this was the XPM profile.!! now im using the stock frecuencie yesterday, I played 24 hours without crashes everythings OK,!! so if my MB withstands these frequencies of 3kmh. why is it causing me problems?
Processor i7 7700
Mother: Asus Strix z270e gaming
Liquid cooling: NZXT KRAKEN X52
Ram: CORSAIR VENGEANCE LED KIT 2x8 / 16GB
GPU: ASUS STRIX 1070
Sent from my iPhone using Tapatalk
 

A:RAM Frequencies Problem

Indeed the board does but as is shown
4 x DIMM, Max. 64GB, DDR4 3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400(O.C.)/3333(O.C.)/3300(O.C.)/3200(O.C.)/3000(O.C.)/2800(O.C.)/2666(O.C.)/2400/2133 MHz Non-ECC, Un-buffered Memory
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.
* Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists

all except 2400 and 2133 are OC

Your processor
https://ark.intel.com/products/97128/Intel-Core-i7-7700-Processor-8M-Cache-up-to-4_20-GHz
Memory Types DDR4-2133/2400, DDR3L-1333/1600 @ 1.35V
supports those none OC at SPD - serial presence detect

So your ram although I do not know which exact model of Vengeance it is - as explained in your motherboard manual must when OC not only be configured alone for ram but as part of the sophisticated procedure on that motherboard - where if you wish you can simply use the 5 step automated process explained on your manual
Have you checked if your Corsair ram is on the QVL list from Asus
https://www.asus.com/uk/Motherboards/ROG-STRIX-Z270E-GAMING/HelpDesk_QVL/
That list cannot of course list all ram that will work with that board, but what is listed has been tested by Asus

This presumes the problem existed - not only on one or two games but across the board
 

Read other 2 answers
RELEVANCY SCORE 45.6

Hey all, this is my first post here, its great to be here!

Anyways,

I just purchased a new motherboard, cpu, and memory (wanted to finally switch from AMD)
I purchased the Core 2 Quad 6600, Gigabyte P35-DS3P, and 2x1GB of Ballistix Tracer
I have Windows XP Pro w/ all current updates

The speed of the memory is DDR2 1066 (PC2 8500)
and my motherboard supports DDR2 1066 and dual channel memory

When I run CPU-Z it says Max Bandwith for each stick is PC2-6400 (400mHz)
The timings are :
Frequency 533mHz, CAS Latency 5

is the frequency correct? it seems slower, i mean my old pc-3200 memory was running at 400mHz CAS latency 2.5.

Just wondering what I would need to change in the BIOS, this mobo's got great OC'ing tools

Thanks for looking appreciate any help!
 

A:Memory Frequencies off

Read other 6 answers
RELEVANCY SCORE 45.6

Is it possible to pick up radio frequencies and interference on computers? I opened my Windows Media Player today and heard, very quietly, a talk radio show and was flabbergasted. It has never, ever, ever happened before. I don't listen to internet radio so I don't know what it could be. Completely dumbfounded over here.

A:Radio frequencies?

Yes, it is possible. Computers are an FCC Class 15, sub-part B product, which means that while they may not cause interference in other products, they must accept any interference caused by something else. That's why your PC can pick up talk radio. You were either picking up a local radio station, or something nearby was radiating that signal.

That's it in layman's terms. You can look up the officialese in your owner's manual if you like.

Read other 2 answers
RELEVANCY SCORE 45.6

A couple of months ago, I built a capable gaming rig (E8500, ATi HD4850, 4GB PC-6400 RAM on a Gigabyte EP35-DS3L with Vista x64), and set it up. It was my first time building a computer from scratch on my own, but I made it and recently overclocked my CPU.

I intended to overclock it to 3.6GHz, and it looked like that in the BIOS but using CPU-Z, it reported it at 6 x 380.0 MHz or 2280 MHz. It does change to the 3.6GHz at times in the program, but never in the output file. I'm assuming this is because of some energy saving thing? The mobo did come with an energy saving program, but I disabled it and stopped it from starting on boot, but I guess I may have not gotten rid of it properly.

CPU-Z also reports that my RAM is PC-5300 (333 MHz x 2), even though the RAM was sealed (at least, it looked like it). My CPU-Z output file is attached, if you want to take a look at it.

Regards,
Cal
 

A:Unsure about CPU and RAM frequencies

Could you post pictures of your BIOS settings? First of all the frequency section... And then of other sections, so we could find the CPU slower option.
 

Read other 2 answers
RELEVANCY SCORE 44.8

The specs of my computer is in my signature. The freq. in which my ram is suppose to run is 1200Mhz. I'm trying to figure out how i can get it to actually run at that speed. When i go into the bios it allows me to either set it to auto or 400, 553, 667, 800, or 1066Mhz but nothing higher. When i set it to auto during startup it says DDR2 667 however when i set it to the 1066Mhz it says DDR2 400 during startup. How do i go about getting it to run faster?
 

A:Solved: DDR2 frequencies

it seems that your motherboard only supports up to ddr2 800. =P
 

Read other 3 answers
RELEVANCY SCORE 44.8

i'm curious what the different frequencies mean. does the higher frequency mean better performance, or what? Right now i have 2 gigs of 6400 in my comp but was looking to add more and wasn't sure if i should go with 8500 or just stick tot he 6400.

my mother board supports pc2-5300 pc2-6400 and pc2-8500
 

A:ddr2 sdram frequencies?

Read other 6 answers
RELEVANCY SCORE 44.8

Hey peeps!

I just bought another 8gb stick of ram to go with my other 8gb. Whats installed in there right now is the Corsair Vengeance LPX 3200mhz 8gb. The one i purchased is Corsair Vengeance LPX 2400mhz 8gb. My motherboard being a MSI Z170a sli pl. Will The 2400 mhz stick work with the 3200mhz? If so how would i go about installing it? Do i dual link it, or single? Go into bios set timings with the 3200mhz?voltage?
Or will putting in the Stick automatically adjust the to what it needs to be?
 

A:Installing Ram same brand different frequencies

It should work but both sticks will run at the lower speed of 2400MHz.

Are you in Poland ? (Looking online for your motherboard found only Polish websites).
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hi y'all,
I recently bought a bluetooth adapter for my speakers, so that I can play from my phone or PC without connecting cables. Works great, except that on the PC my bluetooth mouse conflicts with the speaker -- when I move, click or scroll the audio pops and cuts out. I'm guessing it's because they're on the same frequency, but I'm wondering if there's any way I can adjust that so that they don't conflict. Any help is appreciated!

A:Bluetooth frequencies conflicting

Are you using the same BT adapter for both the speakers and mouse?

Read other 4 answers
RELEVANCY SCORE 44.4

What are the maximum frequencies that are available in core i7 processors now?

I ask this because I'm looking for a new desktop PC these days. I currently have an ancient core two duo Pentium D processor runninf at 3.4 GHz, surprisingly all the PCs I have found so far are either very close to this frequency or slower.

A:What are the maximum frequencies that are available in core i7 process

Hello mohab mate is this for a build? if so just go to here https://en.wikipedia.org/wiki/List_o...icroprocessors and take your pick

Read other 1 answers
RELEVANCY SCORE 44.4

After installing Win2k pro I had to change my 41.09 Win98, Nvidia drivers to Win2k drivers and found that there is no option to change my video cards clock and memory freqencies.

With the Win98 41.09 Drivers there was an option in advanced settings to change the frequencies. I am really annoyed because I found that the Nvidia detonator overclocking was more accurate than Riva Tuner.
 

A:Nvidia Drivers :Clock frequencies

You need to install the coolbits reg file to add the registry key to enable the clock frequency adjustment

you can get it here http://www.guru3d.com/files/ in the overclocking and tweak directory
 

Read other 1 answers
RELEVANCY SCORE 44.4

Hello,This is for the X1 Carbon 6th Gen.There are a number of threads this post refers to:https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Yoga-3rd-gen-CPU-frequency-pegged-at-max/m...https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-6th-gen-Fan-Noise/m-p/4083801#M8590...https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-6th-Gen-fan-always-on/m-p/4083948#M... My understanding is that the CPU idle frequency settings are set in Windows registries while the fan settings are set in the BIOS. The issues discussed below are for the laptop on AC, not on battery. CPU issue-People reported that the CPU idles at around 4GHz no matter what tasks are performed on the laptop, leading to excessive heat. Lenovo provided a solution that lowers CPU idle frequencies to approximately 0.86GHz, 1.66GHz, 4GHz for Better Battery, Better Performance, Best Performance power modes (not power plan) respectively. They incorporated this solution in an executable patch found here: https://support.lenovo.com/sa/en/solutions/ht506625Reading the notes for the patch, I see under Operating Systems:Windows 10 1709 (version 16299)Windows 10 1803 (version 17134)And further down, under Additional Information:This issue is fixed in factory preloads based on Windows 10 1803 (version 17134) and later.  Only factory preloads based on Windows 10 1709 (version 16299) had this issue. If the symptoms are not noticed, then it is not necessary to apply the solut... Read more

Read other answers
RELEVANCY SCORE 44.4

I have this 13yr old monitor that's working perfectly fine, but I need to know it's vertical and horizontal frequencies.

Unfortunately I do not have any documentation for this monitor, nor is anything mentioned anywhere on it.

I've been using it on WinXP with a resolution of 1024.768 at (I think) 60.

Any help, pls.
 

A:Need to know the Horizintal/Vertical Frequencies of monitor

voip4africa said:


... a resolution of 1024.768 at (I think) 60. ...Click to expand...

If you were running a resolution of 1024 x 768 pixels and 60 Hz refresh rate, I believe that it is referred to as an XGA video format. The vertical frequency is 60 Hz and the horizontal frequency is about 48.36 KHz
 

Read other 1 answers
RELEVANCY SCORE 44

This has been happening for around 3 days. When I start the computer (desktop) up, the rpm is normal but it slowly starts to speed up. After around 5 minutes, the fan starts moving at a average of 4000rpm and it's really starting to worry me.
I thought it might have been something to do with dust inside the heatsink so I cleaned the dust with a vaccum cleaner. After that, it still wouldn't slow down so I changed the thermal paste. It now slows down a bit but still run at the average of 4000rpm.
I also tweaked with the bios a bit but still no luck.
Help?

A:cpu fan rpm slowly gets higher and higher

Have you checked actual temperatures to see if there's a corresponding rise with increased fan rpm? Couple of free utilities:

Speccy - System Information - Free Download

SpeedFan - Access temperature sensor in your computer

HWMonitor - CPUID - System & hardware benchmark, monitoring, reporting

Read other 8 answers
RELEVANCY SCORE 44

I'm interested in knowing why my pc suddenly starts rocketing through the roof for the fan. no idea what causing it. I went ahead and ran a hijack this if that would help.

thank you,

John Maxwell

Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 5:20:57 PM, on 6/9/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.17023)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Dell Network Assistant\hnm_svc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program Files\Alwil Software\Avast4\ashWebSv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\Program Files\QuickTime\qttask.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Dell Support Center\bin\sprtcmd.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Program Files\TrendMicro\HiJackThis\HiJackThis.exe
C:\WINDOWS\system32\SearchP... Read more

A:Running Fan higher and higher

Your computer might be overheating. Open the side panel and check for dust.
 

Read other 2 answers
RELEVANCY SCORE 44

Hi, ive had this laptop for a while now, and a few months ago the audio was working just fine when i was producing my music, i plugged in my microphone, guitar hitch, i even set up a new maschine micro mk2 and it all worked fine with low latency. I didnt change the latency and a few weeks after letting my computer sit, i came back and tried to go onto soundcloud, and the audio wasnt working right. The audio came out, but it was like the bass had been manualy turned off. I preveously owned a macbook so if you could please elaborate and explain how to fix the problem or what is happening, that would be greatly appreciated.

Read other answers
RELEVANCY SCORE 44

It has hardly been two weeks I've custom built my PC with newly manufactured parts and installed a cracked-activated version of Windows 7 Ultimate x64 on one partition and then ,Windows 8.1 x64 on another partition.
Ever since the first few days , I've been encountering BSOD frequently in every Instance of usage, although the occurrence of them depends on the system load. When the system is in an Idle State, BSOD occurs in 15-45 mins of being idle ; When in moderate use, such as downloading space intensive contents or watching movies it takes 75-90 mins before BSOD happens ; when in heavy use, such as graphics intense gaming or rendering processes, the system runs for about 3-5 Hours before the BSOD occurs. I use Windows 7 x64 as the primary OS and 8.1 is for guest users. I've tried Memtests, HDD tests, Processor Tests, BIOS tests and all turned out positive with flying colors and also tried disconnecting all parts and reconnecting them again, yet BSOD is a common occurrence. The details of the BSOD is as :

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8009DFB028
BCP3: 00000000BF800000
BCP4: 0000000000200401
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\073015-17206-01.dmp
C:\Users\ARITRA\AppData\Local\Temp\WER-41059-0.sysdata.xml

I'm spendin... Read more

A:BSOD in irregular frequencies, error 0x00000124

the dump files would be much more helpful to the analysts.

Read other 8 answers
RELEVANCY SCORE 43.6

How many MHz should i set the Core and Memory Clock Frequencies on my GeForce 5200 FX to without any chance of damage?

Current Settings:

Core- 250 MHz
Memory- 332 MHz
 

A:Core and Memory Clock Frequencies Geforce 5200 FX

Leave them.
 

Read other 2 answers
RELEVANCY SCORE 43.6

 I just bought Lenovo IP510IKB earlier this week, and I really like it, but I think something is wrong with the speakers, when I play music or any kind of audio there is some kind of distortion or vibration at certain frequencies, I don't know how to describe it, it's like there is something vibrating inside the laptop. I tried installing lenovo Harman drivers but the problem is still there, I also tried Windows generic drivers and other softwares like FxSound, but nothing helped, something that I also tried is muting the left speaker and the right speaker, at first I thought muting the left speaker fixed the problem but after a while I noticed the same distortion but not as much. I tried living with this annoying problem as it's not always there, but it really appear when listening to piano, but I can't live with it anymore it's driving me crazy and I can't find any related topics about this problem in the IP510IKB. I live in Egypt and I bought this laptop from souq.com (something like amazon.com) about a week ago, and I don't think I will be able to return it, is it even something that the warranty covers?

Read other answers
RELEVANCY SCORE 43.6

Can someone settle an arguement I'm having with my Nephew. He says that the default clock settings of my GeForce 3 card are too low. At the moment they are 175 Core Clock Frequency and 400 Memory Clock Frequency. We've looked at specifications for this card on the web and in the manual but both have not provided us with an answer. If someone could clear this up for us or provide me with a link that would tell me then I would really appreciate it.

Cheers.

Si

 

A:ASUS V8200 T2 Deluxe Default Clock Frequencies?

That's the correct clock rate for the card. Around page 4 of theis review you can see in the graphs the base clock and some overclocking benchmark results.


http://www.tweakers.com.au/articles/graphics/asusgf3ti200/page1.asp

here is a page that shows the standard clockrate.

http://www.hardavenue.com/reviews/Ti200roundup2.shtml

175/400 seems to be the standard clockrate on most GF3 TI200s. Do a Google search for "TI200 review" and you'll see. I think your nephew owes you lunch or something.
 

Read other 2 answers
RELEVANCY SCORE 38

I have an intermitent issue with the output from my HP desktop.Periodically the screen becomes scrambled (see attachment)I thought it might be the monitor, but that is not the case. Bought and installed new monitor, still got the same pattern on the screen. If I manually shutdown the pc, wait 30mins or so and then re-start, the PC beings in safe mode and the screen is back to normal. This has occurred twice over the last week. Any ideas please?

Read other answers
RELEVANCY SCORE 38

My Dell laptop has a problem with the keyboard. When ever I press a key a different character comes up to what is meant to. For example if I press K, S will come up instead.

What causes this and how can I fix it?
Thanks in advance for any help.
 

A:Keyboard Scrambled

Read other 6 answers
RELEVANCY SCORE 38

I can't get about a third of my images to display correctly while visiting various web sites. This started about a month ago and I have tried several differenet things but I am out of ideas. Here is what my image might look like: *I hope this generates the same image I see, lol.I don't know if I have downloaded a new special defensive anti-spyware program or what. I have never seen this before tho. My display is set on "True Color" Resolution 1024-768 Here is my computer system info. OS Name Microsoft Windows XP Home EditionVersion 5.1.2600 Service Pack 3 Build 2600OS Manufacturer Microsoft CorporationSystem Name xxxxxxxxSystem Manufacturer GatewaySystem Model E-4100System Type X86-based PCProcessor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2394 MhzBIOS Version/Date Intel Corp. BF86510A.15A.0030.P05.0305220848, 5/22/2003SMBIOS Version 2.3Windows Directory C:\WINDOWSSystem Directory C:\WINDOWS\system32Boot Device \Device\HarddiskVolume1Locale United StatesHardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"User Name xxxxxTime Zone Alaskan Daylight TimeTotal Physical Memory 512.00 MBAvailable Physical Memory 162.88 MBTotal Virtual Memory 2.00 GBAvailable Virtual Memory 1.96 GBPage File Space 1.13 GBPage File C:\pagefile.sysAlso, I have Avast free home edition, superantispyware, ad-aware, and sometimes I use my ATF-cleaner to get rid of junk.Any advice appreciated.Jim

A:images scrambled

It helps if we know...what you have tried.Display problems (logically) only have two possible sources...the monitor and the video card/chip.It seems very odd that display problems of this sort...would be restricted to online behavior, IMO.Have you checked Event Viewer for possible clues?How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ Louis

Read other 2 answers
RELEVANCY SCORE 38

Hi,

A am getting my icons scrambled. I rebooted and antivirused the PC and still nothing. Look at the attached pix of control panel...
 

A:Scrambled icons

PUZZLE!

*does the puzzles*

Google " repair icons in XP" or get TweakUi for XP and repair icons from there.
 

Read other 2 answers
RELEVANCY SCORE 38

I have a very weird problem. I have a report that is malfunctioning. A SQL statement is pulling data from my DB and is being "Grouped By" city. All of the cities totals are perfect, except one (Des Moines). It is listed twice in the recordset, despite being spelled exactly the same. There is one city that has been omitted from the dataset (Los Angeles). The data is weekly totals broken down week to week. Upon closer review, I found that the first 2 weeks of both Des Moines rows are identical and are the actual correct numbers for Des Moines. But weeks 3 and 4 are different when comparing the 2 Des Moines rows. The second Des Moines row has totals that actually match the Los Angeles data in weeks 3 and 4. The same SQL statement is pulling the data for all cities and the table is being populated dynamically from the SQL statement. Does anyone have any idea why the data might be getting scrambled? [File is attached]
 

A:Data Is Being Scrambled

Read other 11 answers
RELEVANCY SCORE 38

For example this is how amazon looks to me right now:
 

A:Some web pages are all scrambled up

moving to web forum as this is not a virus.

Have you tried different browsers?
 

Read other 1 answers
RELEVANCY SCORE 38

Hello everyone.
I just bought myself a new desktop, with following configuration
1. Motherboard Asus B85m-g
2. Intel I5 4590
3. Video card Sapphire Radeon R9 280 3g GDDR5 384 bit Dual-x Boost OC
4.Memory Corsair Vengeance 2x 4096 1600 Mhz
5. HDD seagate 1 TB and SSD Kingston 120 GB
I use both DVI slot and HDMI slots for video cards with 1 Samsung monitor and 1 samsung big lcd screen as secondary display.

I have the following problem with my pc:
Each time I start the PC FRESH, after about 2 minutes my image gets scrambled like in the uploaded picture.
The weird part is that it does this only once (maximum twice) when I start my PC fresh.By fresh I mean like after it hasn't been used for at least a few hours.After this happens, I have to reset my PC and then it won't happen anymore for no matter how long I use the pc, until I shut it down and I start it like next day again
Thinking at this, my belive is that it does this because of the videocard when it is COLD, when it gets a little HOT it will not do this anymore.
Can anyone help me solve this problem?
Thank you !

 

A:Screen gets scrambled.

Read other 10 answers
RELEVANCY SCORE 38

How is it that IE8 will bring up Liveleak.com with the headlines and sentences all overlapped? I can go in here with Opera or Firefox and there is no problem. But IE8 makes it so one can barely read what's there.
I've tried the Compatibility View Settings but to no avail. I've tried to upload a screenshot of it, so let's see whether I'm successful at that.

The site is http://liveleak.com/

Read other answers
RELEVANCY SCORE 38

Hi. My first post. It's good to join you all here. I hope someone can help me.

Memory: 4GB RAM
Comp: Dell XPS 400
OS: XP Home SP3
Video: nvidia GEForce 7300 LE
CPU: Pentium D

I reinstalled my computer about four months ago. Ever since then I've had issues with IE8. All other browsers work fine. The screen will suddenly start to scramble. It work fine at first, like right now... evertyhing looks fine. Then all of a sudden it starts to break.

I have the nvidia driver installed, and I also tried uninstalling and reinstalling IE8 and resetting settings. Nothing seems to help. Interestingly, some CSS3 doesn't seem to work now like it did before. Like if click on a form field it won't change color. It did before.

Here is the screen shot:



As I write this the screen has started to go funny again. It even blinks a bit. Notice up above the address bar way up top.

A:IE8 - Scrambled Window

Have you tried using internet explorer without addons?

Try that for a bit and see if that helps.

Start - programs - accessories - Internet explorer no addons

Read other 3 answers
RELEVANCY SCORE 38

I posted the following post in the Other Hardware thread, but I am moving it here:


Quote:




I've had an intermittent problem for some time now involving the keyboard going nuts and converting what I type to seemingly random characters. I've done Google searches, and have searched here in this forum, but all of the information has been unhelpful. I have checked my keyboard settings and my regional settings, and they are all OK. Caps Lock and Num Lock are not involved. I've run various virus and spyware scans. So, here is some information about what is happening.

This is a desktop system, and a Logitec wireless keyboard. I have verified that the problem still occurs with a wired Microsoft keyboard. The problem only occurs after the computer has been on for some time, and seems to occur most often after the computer has been idle for a long period of time.

This problem occurred when I was running Windows Vista 64-bit Ultimate, and is still occurring now that I have upgraded to Windows 7 64-bit Ultimate.

There has been times when the problem is exhibited in some applications, but not all, and times when all applications are impacted. Occasionally shutting down the affected application and starting it again fixes the problem, but most often a complete reboot is necessary.

This has occurred in Word, in Outlook, in IE, and even in the Start Menu command box. Any text entry location, including dialogue boxes, fields on browser forms, address bars i... Read more

A:Scrambled Keys!

Bumping this...

Read other 1 answers
RELEVANCY SCORE 38

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) 64 Processor 3200+, x86 Family 15 Model 79 Stepping 2
Processor Count: 1
RAM: 3518 Mb
Graphics Card: NVIDIA GeForce 6150 LE, 256 Mb
Hard Drives: C: Total - 76285 MB, Free - 48820 MB;
Motherboard: Dell Inc, 0CT103, A02, ..CN708216AGL0L7.
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Print spooler would not open until I followed advice from a 2007 posting. But Now:
letters are missing in a line
sometimes prints every other line scrambled and blurred
prints material from open document but header may be from something I printed several weeks ago.
Thanks. elyts.
 

A:scrambled printing

Reinstall your printer.
 

Read other 1 answers
RELEVANCY SCORE 38

Hi Guys,

When I am on the Internet and I was to view photos or watch videos the web page becomes all scrambled. I am currently using Internet browser Opera. I was using Google Chrome, Mozilla & Maxathon and they have all come up with the same issue.

I have attached a screen shot if what is happening.

Hopefully it all makes sense!

A:Scrambled Webpages

Make sure your Windows updates are current. Also video drivers. If no help, post more info about your computer: see #2 here Information Microsoft support members need from you
It's not a browser issue.

Read other 1 answers
RELEVANCY SCORE 38

Hello,
XP sp3 running on dell 6400 laptop.

I am trying to transfer an audio book to an sd card and need to keep the files in order. Periodically one or two files are sent out of sequence. Since my player plays files in the order they were sent, this is unacceptable. Is there any way that I can force the order files are sent?

Thank You.

A:Scrambled Folders

I believe you mean to say the player plays the file in the order on the sd card.

What order they are transferred in does not matter. It is how they are stored that make the difference.

Can you manually rearraign them on the SD card the way you want?

Read other 15 answers
RELEVANCY SCORE 38

Search shows computer code when entering a subject for search refresh will then fix it but not always? Tried malawarebytes and AVG scan no result.

A:serch is scrambled

System Restore?

Read other 6 answers
RELEVANCY SCORE 38

have toshiba 1 and halve year old. until about 2 weeks ago no proplem.I installed 11 microsoft up dates upon reboot,It went into low res gui then changed to correct resolution but my icons are mindlessy scrambeld system restore put them back ,but after turn off the mess is back. vista home primium 32

A:scrambled icons

Hi frog1 and welcome to Vista Forums

What were the MS updates? Have you installed any optional ones, such as for your graphics? What colour depth are you using?

Read other 29 answers
RELEVANCY SCORE 38

I have a e-machine windows me. I have ran norton virus scans and my icons still up scrambled.Is there a special virus scan that I can run.Can some one help me fix this problem. Thank You Joe
 

Read other answers
RELEVANCY SCORE 38

I have attached a screen shot from my computer and I need help. This happens all the time. Thank you

A:scrambled words

whats the issue here

Read other 11 answers