Over 1 million tech questions and answers.

Cumulative Word Frequency from a Phrase-frequency list in Excel

Q: Cumulative Word Frequency from a Phrase-frequency list in Excel

Hi,

I have a list of terms like:

Phrase Frequency
Hello Mother 5
Hello Brother 2
Hello Jackal 1

Is there a way I can get the cumulative frequency of each word in the list?

From the above example, the answer would be:
Hello 8
Mother 5
Brother 2
Jackal 1

Any help would be most appreciated.

Regards,

Robin

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Cumulative Word Frequency from a Phrase-frequency list in Excel

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 95.6

I was at Goodwill yesterday and I found an ECS K7SEM v1.0 motherboard for $6. Assuming that it works, I wouldn't mind getting an AMD cpu and some RAM to get this going as a multi-purpose additional computer for my apartment.

The original intent of this board was for AMD processor running at either 100Mhz or 133Mhz FSB. The manual for the motherboard says that the RAM speed cannot be less than the processor FSB. For example: according to the manual, if the CPU has a FSB of 133Mhz, then PC133 RAM must be used and PC100 RAM cannot be used. If a CPU has a FSB of 100Mhz, then either PC100 or PC133 RAM can be used, but not PC66.

This manual was printed in 2001. However, in 2002/2003, a new BIOS upgrade was created for this board to allow support for Athalon XP 2100 and 2200 processors.

I was looking at an AMD XP processor at newegg and realized that the FSB is 266Mhz, according to the specs. I always get confused about FSB ratings. Are you supposed to divide this number by 2 with AMD chips? Like if the FSB is 266Mhz, should I use PC133 RAM to be compliant with the statement in the manual about using RAM that matches or exceeds the CPU FSB?

Another question I had is related to the new BIOS update that supports the newer processors. Would I need to use an old processor in order to update the BIOS before I can use the XP processor? Or will I be able to update to the XP supporting BIOS with the XP processor already in the socket?

If everything goes smooth... Read more

A:CPU FSB frequency and RAM frequency agreement, and BIOS CPU support.

When an AthlonXP is advertised with a 266mhz FSB, it is actually running at 133mhz but its DDR nature makes it run as fast as a 266mhz FSB. Any 266mhz AthlonXP should work on that board provided it isn't above the 2200+ ( 1800mhz ).
 

Read other 1 answers
RELEVANCY SCORE 87.2

I am trying to use a function that will tell me how many rows there are with a certain time (ex: between 0645 and 1445, or 1445 and 2245, or 2245 and 0645) in one coulumn (ex: B) and a certain number (ex: 4) in another column (ex: C)

I've tried the following, but the result show FALSE. Where am I going wrong?

{=IF(D$26=0,"",IF(Jan!$C$3:$C$2000=4,(FREQUENCY(Jan!$B$3:$B$2000,{645,1445,2245,2359}))))}

Thanks,
John
 

A:Excel frequency function

Read other 9 answers
RELEVANCY SCORE 86.4

Hello,

I have an Excel worksheet with columns C - H showing dates, with C being the most recent and H being the earliest.

Most rows have values in all date columns, but some have less than 6 dates

I want to find the average time between the dates, in days, and fill into Column B.

I have not been able to figure this out. Can anyone help?!

Thanks so much. I attached a workbook with some example rows.
 

Read other answers
RELEVANCY SCORE 68.4

today i discovered that my memory modules are working too slow, i tested them and i only got 320 Mhz while it's pc3200 ram, so which timings are the best to get 400 Mhz out of it?

screenshot with more information; http://users.pandora.be/tazz/ram timings.JPG
 

A:DDR Frequency too low

hmm interesting...Try looking in bios for way of upping memory clock rate...also make sure its at the right ratio (2:1 ect)
What cpu/mobo you have?
 

Read other 2 answers
RELEVANCY SCORE 68.4

My operating system is Windows XP. I think that title gives you all information about my problem if you had it. When I turn on my computer window appears with this title above and than starts accounting and after 20 seconds monitor turns off. Whatever I try to run, it does not work! I can't get in safe mode... No one key on the keyboard does not react...and the whole keyboard does not react.
 

A:out of frequency

Read other 11 answers
RELEVANCY SCORE 68.4

I am not certain why there's a substantial difference for idling CPU frequency between W8.1 and W7. My PC runs both OS in dual-boot mode, controlled by EUFI "F12" key. Other than both OS having it's own SSD drive, the hardware is identical.

Both OS used HWMonitor, v1.27.0, initially just to see the CPU temperature that lead me to the CPU frequency differences.

The HWMonitor for Windows 7 shows this:

The same for Windows 8.1 shows this:

And no, there isn't anything pegging the CPU, W8.1 task manager shows low CPU utilization around at the time the HWMonitor image had been captured:

The CPU speed/frequency is actually confirmed by the task manager. Is speedstep broken in Windows 8.1, or HWMonitor is not accurate?

Read other answers
RELEVANCY SCORE 68.4

i have lg monitor p3 1.0 ghz machine with 810 main board ,256 sd ram dsl broadband connection ata hdd and frontech 0610 external tv box. it was working fine i can switch from tv to computer till tomorrow. but suddenly there was message when i switch to tv that out of frequency. after that i am unable to get any channel through scanning.Please help me..........

after reseting my tv box i get rid from out of frequency message but i unable to scan all the channel as the scanning is going on without result
 

Read other answers
RELEVANCY SCORE 68.4

Fairly generic question here:
Anyone know of anything on the motherboard of a PC that runs in the 828MHz range?
thanx!
 

A:Frequency

Read other 7 answers
RELEVANCY SCORE 68.4

Ok...so im going to start off by saying... I am stupid... ok lets move on...
"Out of frequency"
So i changed my frequency on my computer just messing around....then i thought it would go back after 15-30 seconds....it did not...so i rebooted...still nothing... so i WIPED my computer and still nothing...and i figured out i could have booted it in safe mode..but now i cant because it says "setup hasnt completed" because i cant see what the screen says so i cant finish it...
windows xp home edition

A:frequency

Worth reading, http://www.softwaretipsandtricks.com/forum...-frequency.html.Such messages usually relate to monitor/display settings, I'd try adjusting the resolution.Louis

Read other 1 answers
RELEVANCY SCORE 68.4

Appreciate some help.....

When I turned on my monitor a dialogue box comes up that say 'out of frequency' then it started counting down from 20 to 0 and went blank but the power was still on . All I get is a black screen, no desktop.
 

A:Out of Frequency

One of the buttons at the bottom of your monitor will allow you to adjust the frequency of the monitor. I'm afraid it may be a case of playing around a bit until you get it right
 

Read other 3 answers
RELEVANCY SCORE 68.4

My CPU is running at 100% frequency, the usage goes anythin from 0% to 100%. The CPU keeps crashing whenever i try to play games etc. It seems to be forcing the CPU to overheat? though i could be wrong,

My set up is Core 2 Duo 6600, x1950 Pro, 2gb Ram, Vista Business. Any help would be greatly apprciated

current fan speed is around 3200rpm
 

A:100% frequency

Hello and welcome to Techspot.

The fact you`ve posted this in this forum, I take it you suspect a virus etc?

Go and read this thread HERE and post a HJT log as an attachment into this thread.

Regards Howard :wave: :wave:
 

Read other 9 answers
RELEVANCY SCORE 68.4

my celeron dual core fluctuates between 1.6 ghz and 1.2 ghz, depending on load. is this supposed to happen? sometimes it goes back and forth many times per minute. thanks
 

A:Cpu frequency

When the processor has different loads on it, depending on how intensive the load is, it will fluctuate the rate or frequency depending so.
 

Read other 2 answers
RELEVANCY SCORE 68.4

I just received my new mobo. I recently had a Hard Drive problem that led me to believe the mobo was faulty.

After putting the parts together again, I recieve an error in BIOS.

"During the last boot-up your system hung for improper frequency combination."

I did not change any of the CPU settings and left them as default.
They are currently:
CPU frequency multiple - 15.0x
CPU external frequency 133/33
The rest is auto.

My specs are:
Athlon XP 2400
A7V8X-X motherboard
512 DDR PC 2700

I cannot get out of BIOS, every time I save and exit, it will not reboot. I have to restart and it sends me back to BIOS with the problem. I am not sure what to do about this.
 

A:CPU frequency help

Read other 14 answers
RELEVANCY SCORE 68.4

Hello.
I suspect that my ram is not in the proper frequency.
Could u plz tell me how to check which my frequency is, then how to set it in right number?(266, 333, 400 etc)
Thanks
 

A:Ram's frequency?

Read other 16 answers
RELEVANCY SCORE 68.4

Maybe it was like this before, but if so, I must not have used the right means of monitoring, because now using CoreTemp or AMD Overdrive, I've noticed that even though my Phenom II x6 1090T is rated at 3.1GHz, it varies between .8 - 3.2GHz, depending on it activity. Shouldn't a CPU's frequency remain constant regardless?

A:CPU Frequency

AMD's cool and quiet feature downclocks the CPU during idle/low usage...it can be turned off if so desired....

Read other 8 answers
RELEVANCY SCORE 68.4

Hi everyone, Im having a slight problem and im sure im overlooking something simple. I was getting a message on startup that IDE hd could not be found. So i went into bios and looked around, didnt see anything unusual so i set it to default settings. Well you guessed it, I needed a new HD. The problem is that after i put the ne HD in and go to properties on my computer. It is saying that my 2.2 gig amd is a 1.01 gig. Ive changed this in bios with other asus mobo's but i cant seem to find where to change it in this one. The mobo is a asus A7N8X deluxe. Any help would be greatly appreciated. If ive left out any info that is needed please let me know. Thanks in advance for your help..
Jop
 

A:CPU Frequency

Hello and welcome to Techspot.

It sounds to me like your bios has been reset to the default settings, which will mean your fsb is probably set to 100mhz.

You need to go into your bios, and select the advanced tab, and then the advanced chipset configuration.

you will need to set the cpu frequency(fsb) to what ever your cpu should run at, I.E it will either be 133mhz/166mhz/200mhz depending on your cpu.

You can check your cpu specs at the AMD website.http://139.95.253.213/SRVS/CGI-BIN/...217292174,K=9272,Sxi=6,RESTART,DTree=OBJ(2132) Click on processor specs, followed by your type of cpu.

Regards Howard :wave: :wave:
 

Read other 5 answers
RELEVANCY SCORE 68.4

I use windows xp and by accident i went on th? setup and p?t th? frequency to 200 and it was 400 before an Now when i boot it 10 to 15 seconds later turns off PLZ help me !!

A:DDR frequency help plz

Reset your Bios.

Read other 3 answers
RELEVANCY SCORE 68.4

hi everyone happy new year to all.my question abt ram ,can we mix the ram frequency like 1GB PC2-6400 DESKTOP RAM MEMORY ddr2 240 pin to 800mhz 2gb or 4gb.kindly if anyone know abt this .thankyou.

A:ram frequency

You can but it will all run at the slowest frequency. Not worth it. Dimms should always be exactly the same for best performance.

Read other 3 answers
RELEVANCY SCORE 68.4

Yeah I am not to familiar with this, and I'm sure any one of you could answer me.
Lets say I buy a q6600 with a FSB of 1066MHZ... Then the ram I buy for best performance should be... ddr2 800 (Pc6200)??? What if I was to overclock the RAM to lets say, 1066, would it work at 1066? I don't even know if this is possible, but can i increase the FSB of the processor?
 

Read other answers
RELEVANCY SCORE 68.4

What kind of advantages would I get if I upped the AGP Frequency in the BIOS? I know it should be 66mhz but what would happen if I upped it a little? Would I get better performance?
 

A:AGP Frequency

I accidentally set mine to 83mhz and got an extra 300pts in 3dMark 03. But you risk damaginf the card.
 

Read other 1 answers
RELEVANCY SCORE 68.4

Heya

I have this online game that I play(Asheron's Call) and I've played it for years on the same monitor(Gateway EV700)

My motherboard is Canyon, and my Graphics Driver is Intel (R) Extreme

Recently I had to format the computer and completely wipe everything and start from scratch.When I got the computer working again I reinstalled all the necessities(Internet Connection, Asheron's Call, Anti-Virus etc) but I forgot to install the Drivers.When I clicked on Asheron's Call(the game) to play it a black screen came up but instead of it displaying the game it displayed a small turquise box with a purple box inside it.

It read:

Out of Frequency

HF: 75.2KHz
VF: 75.0Hz

Operating Frequency
HF: 30(-)70 KHz
VF: 50(-)160Hz

Power save after 20 seconds.(this counts down to 0, unless I minimize the game, in which case the box disappears until i maximize the game again, in which case the countdown re-starts.If I let the timer run out, the green light on my monitor turns orange, and the screen goes on standby or whatever.then I have to turn off the monitor and turn it back on)
I talked to a friend of mine who said I should install my Graphics Driver(I hadn't done this yet) so I used the motherboard CD to install the Graphics Driver, and the game worked fine.

Now today when I try and play the game, I'm getting this Out of Frequency message again.Can somebody help me please?

I'm using True Color 1024x768 with a refresh rate of 75Hz.I've tried... Read more

A:Out of Frequency

It simply means that the game is trying to drive the monitor at a higher refresh rate than it can display.

The frequency error message comes from the monitor, not from the PC.

Without knowing anything about the type of monitor you have, we cannot advise what the maximum settings are. They are set by your graphics controller.
 

Read other 1 answers
RELEVANCY SCORE 68.4

hi guys.. i am just confuse with my ram... CPUZ tells me that i have a PC3-8500F RAM w/c has a frequency of 1066 mhz but when i check the memory tab in CPUZ it says that my dram frequency is 399 mhz... What does this mean?

A:RAM Frequency

See the DDR table at http://hallicino.hubpages.com/hub/DDR1__DDR2__DDR3_Navigating_The_RAM_Maze .

I don't use CPUZ so I can't interpret where it got that 399/400 number. That usually applies to DDR2 modules, as you can see...or your RAM is underclocked currently so that it performs like DDR3-800. Memory Clock: 100 MHz. Bus Clock: 400 MHz. Data Transfers/Sec.: 800,000,000. Module Name: PC3-6400.

I'm just guessing.

Louis

Read other 4 answers
RELEVANCY SCORE 68.4

i bought 2x2Gb 1066Mhz memory modules from Kingston that are compatible with my Asus M4A78-E motherboard.

i have an overclocking software (ASUS Turbo V) that says that the DRAM is at 1.9V. is that equivalent to 800 or 1066Mhz?

if its at 800Mhz should i raise it to 2.1V to get it working at 1066Mhz?

Will there be a noticeable difference?
 

A:how do i know what is the RAM frequency?

You already have a thread here asking the same thing. Do not start duplicate posts regarding the same topic.

This thread is closed.
 

Read other 1 answers
RELEVANCY SCORE 68.4

I have a i7 860 desktop (8 gb ram) which tends to freeze on one of the data applications that I run. Using the 'performance monitor' I discovered that the freeze occurs when the 'frequency' goes above 100%. At no point does the cpu utilization exceed 15%.

Several calls to the vendor have failed to resolve the issue or even educate me.

The question I have is what is this 'frequency' and two, why does it cause the application to freeze while the 8 cores are relaxing ?
Any insight is most appreciated and thanks.
Kumar
 

A:CPU Frequency What is it?

“% of Maximum Frequency” represents the current CPU clock speed as a percent of its rated speed. For example, if you have a 2.8 GHZ CPU and performance monitor indicates 28%, then the CPU is running at 784 MHz.

Here is a decent article that explains how performance monitor works: http://blogs.technet.com/b/winserve...cpu-utilization-for-performance-analysis.aspx
 

Read other 2 answers
RELEVANCY SCORE 67.6

Hello All,

This is my first post but I have used this site to solve many of my problems before.

I have a RAM query, and even though I keep searching for info I get very lost in the details so I was hoping someone here could help me out.

I recently added 2 x 512mb RAM sticks to my motherboard, hoping to increase performance. There were already 2 x 512mb sticks installed. When only 2 are installed PCU-Z tells me the RAM runs at 200MHz, but when I add the other 2 they only run at 159.6MHz. I have checked the BIOS setup and it tells me the RAM is running at 333MHz.

So can I increase this to 400MHz? It does not allow me to change it in the BIOS setup. I have tried searching for the answer in the motherboard manual but havent had any luck - it just says that I can check the frequency, doesn't say anything about changing it. The BIOS setup also does not tell me the FSB (which PCU-Z tells me is 5:4).

According to Triple6 with reference to another user "4 DIMMS is your problem. Depending on the Stepping of your CPU it can restrict 4 sticks to running at 333Mhz instead of 400Mhz". Is this the case for my CPU? If so, could I buy 2 1Gb DDR 400 sticks and take out all the 512 sticks to allow the RAM to run at 400MHz? And if so again, would this increase performance other than marginally?

Any info is appreciated.

Thanks very much
 

A:Changing RAM Frequency

Read other 10 answers
RELEVANCY SCORE 67.6

Hello guyz,

My motherboard is SOYO SY-6VBA 133 with Intel Pentium3 650Mhz. Recently, i found that i can change the CPU frequency. Yesterday, I pressed the 'del' key while i startup my computer and then a blue screen appeared. I entered the 'SOYO COMBO SETUP' then i adjusted CPU frequency from 650Mhz to manual, and i found that i could change my CPU frequency to 806Mhz. Oh, these was cool! But i just afraid it could be dangerous. Anywhere, I'm curious why its changable and I don't know what will happend after i change the value.

Sorry, i'm just wondering. OK.
 

A:CPU frequency can change meh?

You are at the beginning steps of overclocking.
Intel chips speed is determined by the multiplier(in your case default at 6.5, this feature is locked internally in the chip and cannot be changed) and front side bus speed (100mhz default with your chip, with the right motherboard and bios this speed can be changed as you have found)

What will happend if you change the value, depends on your system and if it can handle it.

By overclocking the front side bus to 124 as you found you are also overclocking the agp bus from default 66mhz to 83 mhz, the pci bus is also overclocked from the default 33mhz to 41mhz.

What's it mean.

agp bus overclocking, some video cards will tolerate it, some won't. Can cause crash and lockups

pci bus, hardest on hard drives, some won't take the faster bus and you get corrupt data errors or in some rare cases failed hard drives.

front side bus at 124, if you have good memory(pc133) it will handle it, if you have pc100 it probably won't be able to run that fast without lots of errors.

Biggest problem HEAT
The increased frequency will generate a larger amount of heat. If you have a very good heatsink/fan and case ventilation it may work, if not it's going to crash.

Chip voltage, generally overclocked chips to be stable will need the vcore voltage upped a small amount, this also creates more heat and stability problems.
If your going to do it, do it in small increments. Your bios should allow you to make changed to lower... Read more

Read other 2 answers
RELEVANCY SCORE 67.6

Hey guys,

I realize that there has been posts about this in the past. However, from what ive read they were still able to get into windows and mess around with things. Well this was the case the first time around, I was able to update my friends video card drivers that were 3 years out of date. That fixed the issue for about two weeks. The issue cropped up in the first place when my friends son installed Left for Dead 2 on the computer.

Now whenever the computer is turned on and windows vista starts to load it goes straight to the black screen with "Frequency out of range" dancing across the screen. I cant even get to the login screen for vista. I dont have the specs handy but it is an E Machine. I know *shudder* The computer is kinda dirty and I plan to clean it out, and the monitor is using onboard graphics.

Any help would be greatly appreciated

Thunder
 

A:Frequency Out of Range

That usually comes up when the refresh rate is too high.

there's an AUTO button or something on the front of the monitor.
change the refresh rate.
Iis it an onboard video or a card? are there any beeps on startup? if so how many?

sounds like the video fault, that is when the refresh rate is to high for the monitor couple things you could try

first
press f8 on boot and select vga mode
the once into the os reset the video card options

second
try another monitor

third
if its a card, swap it out, if its on board put a card in

lastly
reset the bios to defaults check your motherboard manual there is a jumper on the motherboard to do this normally.
 

Read other 3 answers
RELEVANCY SCORE 67.6

everything works fine no my comp but i was trying to convert videos and i get the messege " 27.9khz/53.2hz frequency out of range try other resolutions" then i have to hold the power button to shut down only way. what seems to be my problem? why is it only when i try video converters? the videos convert to about 70% then this happens. i have uninstalled and tryed different video converters only to get the same messege.

A:frequency out of range

26 veiws and still no help ? im also on a couple other help boards around the net and i havent had no luck in any kind of answer

Read other 2 answers
RELEVANCY SCORE 67.6

Hi, it's me again, new systems up and running great thanks to all your help. I was going through the manual, and I was wondering what the difference was between the front side bus and the external frequency setting. My CPU has a 333mhz FSB, I was wondering if I should have the frequency set at 133mhz or 166mhz. Thanks!
 

A:FSB and external frequency

166 is the correct setting for the system clock resulting in 333 for the system bus speed
 

Read other 1 answers
RELEVANCY SCORE 67.6

I currently have Windows XP pro running on a Dell Vostro 200. I have an up to date Intel graphics media accelerator driver (which I reinstalled to see if that would fix it but didn't.)

I keep getting "Frequency out of range 96.6" when I boot my PC. Not all the time. Usually, if I put my monitor on before I press the power on button on my PC, it doesn't show. But today it did. I hate this cause the PC boots up but the "Frequency out of range" message prevents me from viewing the Desktop so I have to power down the PC by pressing the button and start all over again. Not good for the PC and not good for me.

Situation began when I accidentally selected the incorrect range for my monitor. The "Hide modes that this monitor cannot display" was unchecked (which I didn't see till after the fact) and I selected the wrong hertz for my monitor. I have since corrected that but it has not corrected on the system causing this error. I uninstalled and reinstalled the monitor using Device Manager but it didn't fix it. I'm wondering if there is something in the registry that is holding the old setting that I can change.

Thanks for your help.
 

A:Frequency out of range 96.6

Read other 13 answers
RELEVANCY SCORE 67.6

For about the past two weeks now, my CPU has started behaving strangely. I noticed it doing this while gaming, when what should have been perfect performance was kind of choppy. I alt-tabbed out of the game and peeked at SpeedFan, and noticed my temperature not rising above 50c while playing a game that normally shoots it up to around 75c.

Looking at CPU-Z, I see that for whatever reason the Core Voltage keeps randomly changing between 1.0 and 1.3v; this in turn is causing the multiplier to variate between 16-22. While typing this, it was staying at 1.235v, but dropped down to 1.0 when I ran a game just then to see if perhaps it had fixed itself like it seems to randomly do also. Also on that note, CPU-Z used to show my multiplier as "x23 (x23)", but now shows it as: "N (12-25)", N being whatever it's at currently based on the voltage, I assume. I don't know why it's suddenly listing a range of multipliers instead of just x23 as it used to. Also not sure why the range listed extends beyond what I thought was my CPU's maximum, x23. (I've never seen the multiplier go higher than 22 or 23 during all of this, or ever before for that matter.)

As far as I know, no Windows or BIOS settings are causing this, as nothing had been changed when it started happening (other than Windows updates). The only thing I've changed today was turning Turbo Boost off in the BIOS, but that had no effect. I was contemplating turning SpeedStep off also, as it kind of seems like th... Read more

A:CPU frequency fluctuation.

Your bios setting, things like speed step will make a computer do things like this.
It' designed to work that way.
When your computer has less demand the voltages will go down and the multiplier will change. When you computer is ask to do more work it will work in the opposite fashion.

Their are settings in the bios to change all this but it varies from motherboard to motherboard.
It's done for a reason. When you computer doesn't need the extra voltage and therefore the voltage is lowered the computer runs cooler. Under load the higher voltage will raise the temps so you might hear the fans speed up. That will depend on the fans and the temp.

If you don't have special cooling I would leave it set as it is. Changing such things without extra cooling will cause a computer to over heat.

I have this computer to run 4.6 all the time but I got lots of extra cooling.
2 pumps, 2 radiators and 14 fans.

To learn more it will take some time. My post is just touching what can and can not be done in bios.
Open you motherboard manual and go to the bios section and read. Then on ever setting Google it and you will find a explanation of what these thing in the bios do.

Read other 9 answers
RELEVANCY SCORE 67.6

Hi everybody

I have a problem with my NVIDIA NVG18A graphic card with 64 MB. I bought it very recently and fixed it in my PC with configuration of 512MB RAM, 933 MHz CPU, 30 GB hard disk and P3 processor running on Windows XP.

This graphic card has VGA Out, S-Video Out and AV Out. I connected my desktop monitor with VGA Out port and my TV with AV Out port. Till now, every thing went fine.

When I switch on the PC, after Windows XP logo comes in my monitor, “Frequency Out of Range” message is coming in my monitor . It is very funny that some times it works fine. I mean when I start my PC, some times I will not see this error on my monitor. Monitor displays “Welcome” screen of windows XP and then desktop appears but some times it says “Frequency Out of Range”. If I see this message on my monitor, what I do is forcefully shut down the system by holding the START key on my CPU for some time. Then restart PC again. Then it is my luck. Some times, desktop appears with out any problem or if not lucky enough then again “Frequency Out of Range”. Repeat the same process of “shut down – restart” (some times 6 to 7 times ) until I see my desktop in my monitor. But as I mentioned already, it is not always. Some times it starts perfectly.

I don’t know what to do to avoid this situation. I did not install any drives related to graphic card. The moment I started first time after fixing the graphic card, XP identified my new hardware. Any help in this regard is greatly apprecia... Read more

A:Frequency Out of Range

Hi,

Boot your pc into safe mode by pressing the f8 key as it starts.
When it has booted, right click on the desktop & choose properties, click the settings tab.
Now change the colours to medium, (or less) & the resolution to 800X600 (or less).
Restart your pc & set the colours & resolution to the ones you want to use.
Restart again to make sure all is ok.

hope this helps

Rob
 

Read other 2 answers
RELEVANCY SCORE 67.6

Frequency out of range is what my computer says when turning on now after windows xp tries to load up. What does it mean and what do i do?

A:Frequency out of range

boot up in safe mode and reset the frequency to what it supports in the video card software

Read other 2 answers
RELEVANCY SCORE 67.6

Hi I've just finished my first System build and after runnign CPU-Z I found my Frequency on Corsair Vengeance 1866Mhz RAM to be 1333Mhz. (665 doubled approx 1333) I am wondering if I can correct this without damaging the modules, I complete their full potential without damaging themselves, and hopefully without producing much more heat.
 

A:RAM frequency Incorrect

The RAM frequency depends on your motherboard chipset. In other words, it doesn't matter if you have 5000Mhz RAM, if the motherboard chipset runs as 1000Mhz, the RAM will run at 1000Mhz.

What is the make and model of your motherboard, and which cpu is installed?
 

Read other 1 answers
RELEVANCY SCORE 67.6

Hello i installed recently new RAM at my system :

Size 4096 MB
Type DDR2-664 - Dual Channel
Frequency 332.4 MHz (3:5)
Timings 5-5-5-15
Slot #1 ModuleKingston - 2048 MB (6400)
Slot #2 ModuleKingston - 2048 MB (6400)

Why frequency of each module is 332.4?the modules have 800mHz each..
Is it because i have windows XP 32bit?
 

A:Solved: RAM frequency

Read other 16 answers
RELEVANCY SCORE 67.6

Hi all,

i recently had a huge problem on Win7 with consistent pop ups of the 'blue screen of death'
(didn't MS say win 7 will not have this issue??)
anyhow i automatically assumed it was a problem with the ram & purchased a new Transcend 800mhz 2GB DDR2 module.
Previously i had TWO modules of 1GB 667mhz DDR2 ram.

Obvious, it turned out that the problem was not with the ram as i continued having the blue screen even after ram replacement.
The Motherboard i have is the XFX nforce 650i which supports both frequencies.

so is it ok to use these 3 modules of ram?
 

A:Different frequency RAM modules

Read other 7 answers
RELEVANCY SCORE 67.6

hey guys,
new here but i got a game tonight and when i go to play it you see the begining showing the people who made it and the video clip and when it goes to the menu part of the game my screen will go black and a little blue box in middle of screen comes up sayin H.V Frequency Over Range???? i have a lot of games and have never run into this problem b4. does anyone know wut it means and how to fix this problem so i can play the game? and it sits at that black screen with the blue box for mybe a min if not less then screen will go to hybernate? any info would b appreciated.
thnx
josh

A:H.V Frequency Over Range?????

try lowering the refresh rate on the monitor

Read other 1 answers
RELEVANCY SCORE 67.6

Okay, I'm totally stumped on this. It started few weeks ago, when every morning that I would turn on my computer my monitor would display a signal saying "frequency out of range" I would then manually turn off my pc and turn it on again until an image was displayed. I tried checking the resolution and everything was fine, refresh rate was fine and everything. I have an AMD 6670 and an HD1700 gateway monitor. I already tried updating my drivers and entered in safe mode. Now, the strange thing is, it ONLY happens on mornings. I keep my computer on most of the day, but I've turned it off and on during the day to see if I still received the same message and it works just fine. This doesn't happen when I play games or anything only every morning on startup and I have to reboot until I see an image on my screen after about three tries and then it works fine even if I reboot it. I'm using Windows 7 Professional.
 

A:Frequency out of Range

Instead of rebooting the computer try, unplugging the power cable to the monitor, pressing the power button on the monitor, then plugging it back in and turning on the monitor and see if that works as well.

You also need to list the full and complete specs of the computer. Be sure to include the make and model of the power supply as well; you may have to open the side of the computer to see the sticker on the power supply. Or if its a brand name system list the exact model and any upgraded parts you have. You can use the TSG Info tool to fill in your missing computer information in your user profile as well: http://forums.techguy.org/7586892-post1.html
 

Read other 2 answers
RELEVANCY SCORE 67.6

I just bought 2x1gb dual channel ddr2-6400 ram. 4-4-4-12-1T 800mhz

I checked it in CPUZ latest version 1.41 and it says my memory is running at 400mhz.

Is this just a ddr2 thing where i multiply the frequency by two for some reason and leave it at 400 or did i make a mistake somewhere in the bios. In the bios it says 800freq. Maybe its just cpu z's way of doing things since some of the info it gives me is quite weird.

System specs that are relevant
e6300 not overclocked
evga 680i mobo
2x1gb corsair xms2 6400c4

The memory is sli ready so I enabled sli ready memory and set it to max within the bios.

All the timings are correct and ram is running at 2.1 voltage.

should i disregard what cpuz is telling me, interpret it differently or change something in the bios.

thank you
 

Read other answers
RELEVANCY SCORE 67.6

Are all nic cards the same frequency?
 

A:Are all nic cards the same frequency?

If you only have one WAP, all of the clients connecting to it will be on one frequency. OTOH, if you have a lot of clients, you'll probably want more than one WAP, and they'd be on different frequencies.
 

Read other 1 answers
RELEVANCY SCORE 67.6

I want to buy an additional ram, but I didn't find out my ram frequency, help me please !

I looked at the ram and it appears pc3 10600s but Speccy and Cpu Z says 10700 !!!
is it 667 MHz or 667*2= 1333 MHz ?

A:How to find out my ram frequency !

  
Quote: Originally Posted by HpBaxxter



I looked at the ram and it appears pc3 10600s but Speccy and Cpu Z says 10700 !!!
is it 667 MHz or 667*2= 1333 MHz ?


Do you say "it appears pc3 10600s" because you personally opened the case and read that off the sticks?

What brand and model do you have right now?

DDR stands for "double data rate"; so it is 667*2=1333.

DDR3 1333 can be designated as PC3 10600 or PC3 10666. A few manufacturer's use the PC3 10700 designation, but that is less common.

You could also go to Crucial.com and let its configurator sniff your PC. It will make recommendations for compatible RAM.

Have you looked at the compatible memory list at the motherboard manufacturer's web site? You don't have to stick with what's listed, but those listed should be compatible for sure.

It's generally recommended to match all sticks exactly (brand, model, size, voltage, etc), but you can often get away with not doing that.

Read other 3 answers
RELEVANCY SCORE 67.6

Why does my RAM work at cca 320Mhz instead of 800?
Does anyone know?

A:Why is my RAM working on such low frequency?

It looks like that is the default setting. Is this an OEM or custom build PC? What is the make/model of the RAM? Can you download CPU-Z and post a screen shot of the SPD tab of the slots the RAM or in.

With RAM, there is a multiplier of 2, so in reality your RAM speed is/should be around 666 mhz. As you see mine, I'm using my RAM in XMP mode and it showing at 1200 mhz but with the mulitplier it's running at 2400 mhz. You can confirm this in your BIOS.

Most modern RAM stock/default speeds are 800 mhz and you have to adjust (essentially over clock) the RAM in the BIOS to the correct or desired speeds.

Read other 1 answers
RELEVANCY SCORE 67.6

Good Day,

I hope someone can assist me.
I have been having a problem whilst gaming (although this also runs over onto net use when playing flash games ie. pokemon global link), I've noticed that my pc/game would stutter immensely for a while and then would run fine again.

I've found that in resource manager when this happens that my frequency rate drops from 100% to 25% and then after a time goes back to a 100% (stuttering then stops)

At first I thought it was with NT Kernal & System and through that and following a guide on how to locate the problem, I've established that it is the driver amdppm.sys

I'm not a terribly technical person, so thanks to all the tutorial makers out there.
I've then tried replacing the amdppm.sys with a different version of the same file, the stuttering stops, however after a period of time, my laptop would shut itself down completely.... so I replaced the previous file that I had thankfully made a copy of.

As helpful as google, this site and various others have been. I've yet to find a way to rectify the problem... without causing anymore and as I've said, I'm not terribly technical and fear that I might worsen the problem more before ever being able to fix it.

Please if anyone knows of a way to fix this, it would be greatly appreciated.
System Spec:

Processor: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-82
Motherboard: Acer JM70PU
Bios: Ver 1.00PARTTBL
Total Memory: 3.00 GB Usable Memory: 2.3... Read more

A:CPU Frequency Drops

Read other 16 answers
RELEVANCY SCORE 67.6

I have a computer with AMD E-450 dual core processor. It is quite slow and I have been trying to work out if each processor has 1.65Ghz frequency (totalling 3.3 Ghz) or if each processor has only 0.825 Ghz frequency (totalling 1.65 Ghz). Can anyone tell me? Thank you.
 

A:Processor frequency

If the cores are rated at 1.65Ghz then each core is 1.65 Ghz.
They are not additive.
Some software will use both cores,some won't.
1.65 Ghz is not all that fast by todays standards.
 

Read other 3 answers
RELEVANCY SCORE 67.6

My P50 i7-6820HQ always runs near max turbo speed in Windows 10, even with no load.  I'm not sure when this changed, but I know it behaved properly in the past with low idle speeds and often 0 fan speed.  I don't see anything unusual in BIOS (1.42).  I temporarily reverted to an earlier BIOS when I noticed the issue, but this had no effect. I don't see any programs or services that look unusual.  Power profiles have no effect.  Same on battery or AC.  I regularly scan for spyware, etc. Any suggestions will be appreciated. 

Read other answers