Over 1 million tech questions and answers.

error message flip share

Q: error message flip share

this error messafe pops up and I can't get it off screen - and Im not able to access anything once it is up. The Flip will import videos but I cant do anything after that!

this is message:
Clipping Files: An unexpected error occurred. If this occurs again, please contact technical support.
Debug Info: Mp4Clipper::OpenInputFile could not open fileC:\Users\user\Videos\FlipShare Data\Videos\VID00714.mp4

Thread Name:


Preferred Solution: error message flip share

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: error message flip share

howdy, and welcome to TSG.

take a look at http://homecommunity.cisco.com/t5/S...unexpected-error-occurred-if-this/td-p/455491, that may help.

Read other 1 answers

I think the Flip Share program got added to my new computer after I bought it. However it got there, I want it gone -- but I've been unable to uninstall it. Will it be a problem if I simply delete the folder from under Program Files (x86)?


A:Unwanted Flip Share

is it listed in start > all programs > flip share > uninstall ?

Read other 3 answers

We are getting the following error when mapping to a network drive of a DFS share on Windows 7:
?The mapped network drive could not be created because the following error has occurred:

A specified logon session does not exist. It may already have been terminated."
In our case, the user logs on his workstation using his regular domain account, then maps to the network DFS share using the service account of an application.
There is a fix from Microsoft (MS KB968264). But this fix requires disabling the "Network access: Do not allow storage of credentials or .NET Passports for network authentication? property. This is against the Microsoft own best practices (Network access:
?Do not allow storage of passwords and credentials for network authentication? should be set to
ENABLED), and is NOT acceptable for us for obvious security reasons.
Question: Does anyone know an alternative fix to this issue that does not introduce security risks?
Thank you in advance!

Read other answers

How can I stop the desktop from showing up in Flip and Flip 3D?

Read other answers

Ok...so I recently (few days ago) did a windows vista update...like I always do...and it proceeded to screw up my system badly. So heres what Ive done so far in an attempt to correct these problems.

1: Dell Factory Image Restore = result: no help

2: Registry Cleaners/repairers = result: no help

3: Reinstall Windows Vista = result: little help but other problems occured.

Ok so now that your up to speed with what Ive done so far. Lets review the problems.

1: Windows document flip (you know that thing that scrolls through the desktop and currently open programs) no longer does that cool effect

2: Winamp is spazing out and everytime I open it (minus it then maximize it) my desktop icons shuffle

3: I cant get Mozilla firefox to display flash correctly. (yes I have the most uptodate flashplayer, its something els causing this problem) Explorer views flash 100% correctly but firefox wont so I know its just a setting somewhere thats wrong.
Any help with these problems would be greatly appreciated.

A:Document flip Error

Are you 100% sure all these problems resulted from the last Windows Update installation?

I would be tempted to do firstly a System Restore and see if that fixes the problems.

You also have the options of going to Windows Updates in Control Panel and then uninstalling the last updates one by one til you find there are no problems.

Having said this, you will eventually be faced with renstalling them again down the track ................

I would be kind of surprised if it really was the updates causing all these problems but worth a go anyway!

Read other 2 answers

G'day people!

Like many others here, I've experienced the situation where Windows Update point-blank refuses to update, and returns the generic 0x8007370B error code.

Microsoft's help relating to this code is woeful to say the least; thankfully a bit of "Google-fu" has led me here.

I've run (and re-run) the SURT and the various Windows Update FixIt and Hotfix tools from Microsoft, with no success.
I've even tried their method to reset the the Windows Update sub-system to no avail.

From following the diagnostic instructions posted in other threads, it has become apparent that I too have been the victim of bit-flip errors, as evidenced in the CheckSUR.log file included below.

Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 20.0
2013-09-14 22:54

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_11_for_KB2729094~31bf3856ad364e35~amd64~~
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_2_for_KB2705219~31bf3856ad364e35~amd64~~
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_5_for_KB2647753~31bf3856ad364e35~amd64~~
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_for_KB2732500_SP1~31bf3856ad364e35~amd64~~

Checking Package Watchlist

Checking Component Wa... Read more

A:Windows Update error 0x8007370B; bit-flip errors apparent from SUR log

Registry corruption such as you have is almost impossible to legislate for

I need to have alook at your COMPONENTS registry hive

Please copy theC:\Windows\System32\config\COMPONENTS file (no extension) to your desktop andthen compress it - upload the compressed file to your favoured fileshare site(preferably Dropbox or SkyDrive) and post a link.

Read other 9 answers

Hello i Have the above problem while I try to share a printer on a domain network.
My windows firewall (localy) is also damage, is that the problem that I have to solve first?

Windows 8  - cannot share a printer error message appears "[Window Title] Printer Properties  [Main Instruction] Printer settings could not be saved.  There are no more endpoints available from the endpoint mapper.   [OK]

A:Windows 8 - cannot share a printer error message appears "[Window Title] Printer Properties [Main Instruction] Printer settings could not be saved. There are no more endpoints available from the endpoint mapper. [OK]

You may need to reinstall the printer. Remove the printer driver from Control Panel\Programs and Features, then add the printer from Devices and Printers.

Please note that if the printer driver is not in the list in Devices and Printers, I suspect that the printer is currently not compatible with Windows 8. In this case I suggest you contact the printer manfuacturer for more information.
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 5 answers

Basically I'm looking for an app which lets me use the "share" function in the charm bar, to share photo's/youtube vid's, etc... to a facebook message. Right now I can only share it to my wall via the "people" app.

Any of you know such an app which has this feature??

Thanks in advance

A:Share to Facebook message

Hi Martin,

Give our Facebook app a try: Metro Social (or direct link here: Metro Social app for Windows in the Windows Store) we just added a live tile and share charm support.


Read other 6 answers

Dear Expert. 
Lately, One of my user received the following error message everytime he startup the computer after key in the windows password. 
AutoIt Error - Line0 (File "C:\Users\User_Profile\moogais48kc6rf\GoEbRhoiqCWu.FZB")"
I've to navigate to the user_profile folder and i couldn't see the following .FZB file. 
Does anyone encounter this error message before? 

Read other answers

We have some shared folder from "Windows Server 2008 R2" server. I am trying to access a share folder called "Test" (\\abc\test)  from a Windows 7 Professioanl 32 bit Edition and received the below error.
"share access Error code : 0X80004005 Unspecifed Error"
I am able to open \\abc\test from Windows XP Professional SP3 Machien.
I tried the below troubleshooting steps from Windows 7 Professional Desktop
1. nslookup
Server : test.def.com
Address :
Name : abc.def.com
2.  Mapped Network Drive \\abc\test and i am able to open.
It was working without mapping the shared folder earlier. Please let me know the solution to open
\\abc\test with out mapping.
Boopathi S 

A:share access Error code : 0X80004005 Unspecifed Error

I would like to suggest you try the following steps to see what the result is:
 Disable the firewall temporarily for a test.
 Try to disable IP v6.
How to disable IP version 6 (IPv6) or its specific components in Windows 7, in Windows Vista,
in Windows Server 2008 R2, and in Windows Server 2008
disabled Requiresecuritysignature on Windows 2008 under lanmanserver:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Requiresecuritysignature registry value is set to 0,
and on Windows client under lanmanworkstation:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lanmanworkstation\Parameters\Requiresecuritysignature registry entry is set to 0.Alex Zhao

TechNet Community Support

Read other 2 answers


When I open a Command Prompt as non-elevated , I receive the following error:-

The system cannot find message text for message number 0x2350 in the message file for Application.

The system cannot find message text for message number 0x2334 in the message file for Application.

If I open a Command Prompt as administrator I receive:-

The system cannot find message text for message number 0x2350 in the message file for Application.

The system cannot find message text for message number 0x2334 in the message file for Application.
The system cannot find message text for message number 0x8 in the message file for System.

This relates to Windows Vista x86 and I am totally stuck!!

A:Vista Command Prompt error - Cannot find message text for message number 0x2350

How are you opening cmd prompt

Read other 3 answers

Hi, this is my daughters computer  which I have brought to you before, she keeps downloading stuff (minecraft mods etc).  I suspect malware as we are getting  weird boxes appearing on start up, would you please check the logs - thank you
DDS (Ver_2012-11-20.01) - NTFS_x86 
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.13.2
Run by hp at 10:21:07 on 2013-04-04
Microsoft Windows XP Professional  5.1.2600.3.1252.44.1033.18.3455.2776 [GMT 1:00]
AV: Avira Desktop *Enabled/Updated* {AD166499-45F9-482A-A743-FDD3350758C7}
============== Running Processes ================
C:\Program Files\Avira\AntiVir Desktop\sched.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\Hewlett-Packard\HP ProtectTools Security Manager\PTHOSTTR.EXE
C:\Program Files\Avira\AntiVir Desktop\avgnt.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\Program Files\WIDCOMM\Bluetooth Software\BTTray.exe
C:\Program Files\Avira\AntiVir Desktop\avguard.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDO... Read more

A:Security error message active desktop recovery message

Hymy name is Daniel and I will be assisting you with your Malware related problems.Before we move on, please read the following points carefully.First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding.Perform everything in the correct order. Sometimes one step requires the previous one.If you have any problems while you are follow my instructions, Stop there and tell me the exact nature of your problem.Do not run any other scans without instruction or Add/ Remove Software unless I tell you to do so. This would change the output of our tools and could be confusing for me.Post all Logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts.If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean.My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.I am currently visiting an evening school and working nightshift only which might be evening for you. In this time I am mostly online with my mobile devices and won't be able to reply.    Click > Start > Control Panel > Add / Remove Programs and uninstall the following pr... Read more

Read other 19 answers

I try to mount a network drive using command net use between 2 computers : 
Windows XP (admin$) (keyboard Qwerty, EN)
Windows 10 Pro (net use) (keyboard Azerty, FR)
net use p: \\<ip_xp>\admin$ /user:<ip_xp>\administrator  <password>
But I have the error inside the sécurity event viewer : 529
Something like that : 
Unknown user name or bad password
Name: susan (different every few mins)

Type: 3
Process: NTLMSSP
User Name: username
Domain: our romain
Logon ID: (0x0,0x3E7)
Process ID: 9692
Services: -
Network Address: -
Port: -


(The goal is to build a VM through VMware Converter)


Read other answers

Hi folks, I hope someone can help me with this problem:

I'm getting the 'Windows not genuine' message box show regularly. When I follow the link to investigate I get the Windows Activation Technologies box come up saying that the Update Installation Failed with Error Code 0x8000247.

A while ago I replaced a failing hard drive with a new one, cloned the hard drive and used that image to replace everything. After a while I started to get the not genuine message.

Here is the diagnostic report, and I would welcome any help:

Diagnostic Report (1.9.0027.0):
Windows Validation Data-->

Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-TBM4X-GXTGC-GT8X9
Windows Product Key Hash: JCkgn/yX0uIXVvNpetump5h4B8c=
Windows Product ID: 00359-029-7031935-85483
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {3FFF282A-2C20-4B16-8478-BAD3A2C333FF}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered,
Signed By: Microsoft
Product Name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7600.win7_gdr.110622-1503
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x... Read more

A:Windows not genuine message plus Error message 0x8000247

This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post another MGADiag report.

Read other 9 answers

I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up.

Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b

thanks for the help.

A:Error message: Exception Process Message c0000013

I think before you ask here you can try search in google.
See here for your error:

Read other 2 answers

My Dell desktop Dimension E510 computer with one gig RAM and XP professional failed to start and I was eventually forced to do a repair of Windows which after several hours allowed me to restart it and it is apparently back to where it was with no need to reinstall any drivers, programs, settings, etc. During the Repair there were two places were I had to skip things that would not load. However, it now has two error messages that keep popping up and I cannot get rid of them.

The first is in a window labeled "msfeedssync.exe - Application Error". The message is "The instruction at 0x77d4bbcd referenced memory at 0x00000048 cannot be read". It pops up and says click OK to terminate program or click cancel to debug the program. Clicking either twice closes the pop-up but it returns about two minutes later. How can I get rid of thsi message.

The second problem is a window labeled "Status" which starts a ticker tape to load info and then a second window pops up that says "The feature you are trying to use is on a CD or other removeable device. Insert disk and click OK. The status file is an "Installation Package.msi file. No m,atter how much I click cancel or OK the windows will not close. I can put them in the background, but is annoying.

Any advice would be helpful. I thought of doing a complete reinstall of Windows but I believe it wipes out all my programs and I don't want that if possible. Thanks in advance for any help. This... Read more

Read other answers

When I try to post a message on a board that I joined, I get the following error:

"The host you are trying to send the input from is not a valid host."

What does this mean? And how can I fix it?

A:error message when attempting to post on a message board...


Read other 1 answers

I have a unusual case where I need to setup two mapped network drives as two different users to the same share location. When I attempt to map the second drive after inputting the user name and password the system goes on its merry way for a few seconds
and then returns me back to the username/password input.
If I change the second mapped network drive to use the IP address the two shares work happily. If I manipulate the host file and point two paths to the same address then I can also work around this problem. However, I would simply like to know why I am blocked
from setting two mapped drives to point to the same share with different credentials? 
TestFolder on TestServer is shared to TestUser1 & TestUser2 where the IP of TestServer is
If I map S: to \\TestServer\TestFolder using TestUser1, if I then map T: to \\TestServer\TestFolder using TestUser2 it will not work. 
Mapping S: to \\TestServer\TestFolder using TestUser1, if I then map T: to \\\TestFolder using TestUser2 it will work and I can access the folder as the two different users.
Case 3
If I map S: to \\TestServer\TestFolder using TestUser1, if I then map T: to \\TestServer\TestFolder using TestUser1 it will also work (but I am accessing S: & T: as the same user). 
Why do cases 2 + 3 work, but case 1 does not? 

Read other answers

When I try to add users to a SharePoint site I receive the following message:

"Cannot add user because a user with that name already exists."

Some additional information:

1. I am one of the administrators of the site (there is one other administrator).
2. We both receive the same error when trying to add users.
3. We are using SharePoint 3.0
4. Under the "Manage Users" page the people we are trying add do not show up as users.


Read other answers


Upon arriving at work today, our MDT server no longer runs install TS' on pcs. After logging on to the server I discovered that the deployment share has been messed up somehow- trying to connect to it shows an error message reading:
"The deployment share 'sharename and path' cannot be opened because it was created with a later version of Microsoft Deployment Toolkit. The version of the deployment share is 6.0.2223.0 while the current version is 5.1.1642.1"

Now I know that I haven't done any updates on the share, and there is another share that is still working on the same server, so I am stumped as to why this has happened! We cannot deploy computers until this is resolved, and I can't see to find any information
on it from my research.

Anyone ever seen this?

Edit: I've realized that version 6.0.2223.0 is MDT 2012, which we don't use. First of all- how is this possible? Second, can I upgrade to 2012 and preserve my existing deployment shares?

A:MDT Deployment Share version error

Upgrading the entire console to MDT 2012 and adding the (accidentally) upgraded deployment share seems to have got it back up and running- the OSD TS is currently testing this. I had to also upgrade the second deployment share in order to use it on MDT 2012,
but that went through without a hitch.

Still dumbfounded as to why this happened, or how a DS could be upgraded without the console itself actually upgrading. Luckily, the audit log also showed who did it :)

Read other 3 answers


Traverse to HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows

Right Click the Windows key and click Permissions?

Select Allow on Full Control permission and click OK


Read other answers

I get the problem when I, boot up, gets into the installer for InstantShareDevices gets into a loop, finally I get error 1706, and the computer is very slow, I have TrendMicro Internet Security Pro, here is theFranciscoStartupList report, 20/12/2007, 01:06:51 a.m.StartupList version: 1.52.2Started from : C:\Documents and Settings\pancho\Escritorio\HiJackThis_v2.EXEDetected: Windows XP SP2 (WinNT 5.01.2600)Detected: Internet Explorer v7.00 (7.00.6000.16574)* Using default options==================================================Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\Archivos de programa\Digital Media Reader\shwiconem.exeC:\Archivos de programa\CyberLink\PowerDVD\PDVDServ.exeC:\WINDOWS\zHotkey.exeC:\WINDOWS\system32\igfxtray.exeC:\WINDOWS\system32\hkcmd.exeC:\WINDOWS\system32\igfxpers.exeC:\Archivos de programa\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exeC:\Archivos de programa\QuickTime\qttask.exeC:\ARCHIV~1\MUSICM~1\MUSICM~1\MMDiag.exeC: ... Read more

A:Instant Share Devices And Error 1706

Hi Pancho5428, Our apologies for the delay--we are really swamped lately. If you still require help, please post a new fresh log so I can see if anything has changed and please describe what is happening now.If you have not done so already, please do the initial cleanup steps in the following instructions before posting your new log: Preparation Guide For Use Before Posting A Hijackthis LogPlease read over the instructions there for posting a normal log--what you have posted is a Startup list.Also open HijackThis. If you still have the New Users Quickstart screen enabled, click Open Misc Tools Section.If you just have the regular opening screen, click the Config... button then the Misc Tools button.Now click the Open Uninstall Manager button, then the Save List button. Save the list somewhere convenient like My Documents and then the list will open in Notepad. Copy and Paste that list into your next reply to this post.I do however, think that the problem you have described is an issue with Hewlitt-Packard's software rather than any malware. Please be advised that HijackThis and this forum are intended for malware removal only, not for general diagnosis of every problem you may experience on your computer. If, after you have done the precleaning and there is no indication of a malware problem, you can get better and quicker help by posting in the Windows XP Home and Professional or Hardware forums.If it were me, I would contact HP support. Their software is very compl... Read more

Read other 1 answers

I have a small office that has a server, running Server 2008, that acts as a file server. There are several shares on the server that give access to our 5 users.

We have 5 workstations that all run Windows 7. Each workstation has the same 5 user accounts so any user can work on any of the 5 workstations.

This setup has been working perfectly for years. Now all of a sudden, one machine has starting giving the error 0x80070035 when trying to access the server shares. It can access any other workstation on the network, just not the server. It doesn't matter which of the 5 user accounts you log in as, you still receive this error. All 5 user accounts can access the server from any of the other workstations.

I've also tried entering the server name or the ip address in Internet Explorer on the problem workstation and am also unable to access the server this way.

I would really appreciate any suggestions to get this fixed.


A:Error 0x80070035 - Windows cannot access share

It could be a problem with you Firewall. Try disable the firewall and see if this makes a difference

Read other 5 answers

Win7 sp1 x64
using hidden admin account (super admin)

When I try to enable sharing of partitions (drive letters) I get this error. I tried it on different drive letters, but the same thing. I searched for this using the error message but no meaningful results.

A:Unable to share drives: error 0x00000154

120 views and no one has any ideas??

Read other 9 answers

OK, at first I thought it was a Norton 360 problem so I deleted Norton 360. The Windows firewall is no longer being controlled by it.

Windows firewall is turned off, it's a public location, printer and file sharing is turned on, discovery is on, I reloaded the default settings for the firewall, the owner is administrator which my login is set for. Didn't matter if the Windows firewall was turned on or off, I still got the error message above.

I used to have D shared but took it off. Now when I try to create the share I get the error message above.

I have another Win 7 Pro computer with the same settings as above and I can share everything just fine.

Any ideas on how I can fix this would be greatly appreciated.

A:An error occurred while trying to share D. Incorrect function.

Anyone have any ideas on how I can fix this problem? I really need to share this drive.

Read other 9 answers

Hi all,

i am unable to find out the resolution for this error, can you please help me out from this.

A reply will be appreciated.......!

Arivnd Chormalle

Read other answers

Hello all, today I finally got around to creating a home network between my two desktops and laptop. Well, I set it up using the Network Setup Wizard, and then attempted to share my "My Music" folder (22 GB) and "My Videos" folder (12 GB). Well, when I went to Properties->Sharing and checked the "Share this folder on the network" tab, I got an error message stating:

An error occured while trying to share My Music. The Server service is not started.
The shared resource was not created at this time.

Anyone have any ideas?

Edit: I think I have found why I can't share files on this computer. When I go to My Network Places and click on "View workgroup computers", I get another message saying:
Mshome is not accessible. You might not have permission to use this netowrk resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.

I found this odd because this was the first computer I setup for networking. I have also googled this message, and found that it is commonly caused by the Windows Firewall. I have the Windows Firewall deactivated, and instead I'm using Zone Alarm.

All help is appreciated. Thanks

A:Error When Trying to Share Folders on a Home Network

Probably, the server service stopped ('entered the stopped state') because Windows detected illegally downloaded music and video files. This is standard behaviour.

Read other 2 answers

I'm trying to use GetFolder method of the Scripting.FileSystemObject with Network shares. When running the ASP page a 500 server error is being displayed saying "Path not found". I've tried GetFolder with a network drive although this doesn't seem to work. I'm using classic ASP and IIS.
Any help is appreciated

Read other answers

I am running a new install of XP professional on a newly built Shuttle desktop, connected to my network and the internet via a Linksys wireless router (this computer is wired).

I have no trouble reading shared folders on other workgroup computers, and no trouble sharing the Shared Documents folder on the desktop. However, whenever I attempt to turn on filesharing for any other folder (right-clidking and selecting 'Sharing and Security ...') Windows Explorer freezes and I get an error message stating it needs to close. I send the error report, then get a DrWatson Debugger error message saying it also needs to close. I send that error report and then WExplorer freezes and I have to exit via the Task Manager, after which WExplorer runs fine.

I haven't found any reference to this problem anywhere; does anyone have any idea what it could be?


Read other answers

I have a slow home computer that I'm trying to fix.  My specs are listed at the bottom.  It slows down considerably after I use the computer for about an hour.  But I also get this message from Internet Explore Security consistently:  dw20.exe
A website wants to open web content using this program on your computer
This program will open outside of Protected mode.  Internet Explorer's Protected mode helps protect your computer.  If you do not trust this website, do not open this program.
Name:  dw20.exe.
Publisher Microsoft Corporation
When you push either allow or don't allow, the response is the same.  The website goes offline. 
After that, another message comes on from IEXPLORER.EXE - Application Error
Process ID=0x158c (5516), Thread ID=0x369c (13980).
Click OK to terminate the application.
Click Cancel to debut the application.
Whichever is chosen, the computer begins to slow down drastically. 
My Specs::
(1) Dell XPS 8500; 3.4 GHz; 12 Gb RAM; 64-bit OS; 2 Tb HD
(2) Windows 8.1 2013; Kaspersky 2014©; Comodo Firewall  
(3) Have run free versions of:  MalwayreBytes; Super AntiSpyware; HitmanPro; JRT; FRST64; FSS; MiniToolBox; rkill; tdsskiller

A:dw20.exe Message Followed by an Applilcation Error Message

Hi techgnosis Just so you know, FSS and FRST are reporting/logging tools when used in scan mode only, so they won't fix anything unless instructed otherwise via a fix-list. Thus, I do not suggest you to attempt doing a such thing without proper training since you could easily mess up your whole system with that. Let's take a closer look at these errors.MiniToolBoxDownload MiniToolBox and move the executable file to your Desktop;Execute MiniToolBox and check the following options:List Installed Programs;List Last 10 Event Viewer Errors;List Devices - Only Problems;List Users, Partitions and Memory size;Once this is done, click on Go and wait for the scan to complete;Once the scan is complete, a log will open. Please copy/paste the content of the output log in your next reply;

Read other 13 answers

The connection to the server has failed. Account: ' (1)', Server: '', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E

ABOVE is the error message I am getting using Windows Mail- I can't seem to send or set up my account properly, even though it seems I have entered all the correct information.
Please help if you can.

A:Error message relating to sending message- HELP PLEASE!

Hi and welcome to Vista Forums!

Are you using a software Firewall or hardware Firewall that block TCP port 110?

Read other 5 answers

I have a Compaq Presario SR1303WM Desktop running XP home edition and just recently installed a Linksys wireless adapter. I had some headaches with the adapter setup but I've been off and running for a while now and all of the sudden today I started getting a constant error message sound - but no error message along with it. I thought that it may be associated in some way with the adapter considering I had been getting some error messages concerning the adapter upon start up but I never really had any issues. I've tried many different things - changed some of the start up programs, cleaned the registry, ran a virus scan, etc. and nothing has worked thus far and I'm about to pull my hair out.


A:Help! Constant error message sound with no message...

go to control panel > admin tools > event viewer > under system and application, do you see anything that happened at that same time you heard those sounds?

Read other 3 answers

I have an odd issue.. a user reports that they are unable to access a network shared folder from their PC. Here is what I have gathered so far:
-The network share is from their PC located at C:\SQL2014. The share name is SQL2014. Their hostname for this example is "ABC".
-If I attempt to connect to the share from the user's PC ABC to \\ABC\SQL2014 I get the generic error:
  "Windows cannot access \\ABC\SQL2014
   You do not have permission to access \\ABC\SQL2014. Contact your network administrator to request access."
-If I attempt to connect to the share by ABC's IP \\\SQL2014 I can access it.
-If I attempt to connect to the share by ABC's FQDN at  \\ABC.domain.com\SQL2014 I can access it.
-If I map ABC\SQL2014 as a drive letter, I can access it.
-Connecting to this share works fine from any other PC other than ABC.
-I've confirmed the error is affecting any profile old or new on ABC, which means it is a PC-wide issue on ABC.
-If I share C:\SQL2014 as ANY OTHER NAME OTHER THAN SQL2014, I can access it. As in if I share C:\SQL2014 with the share name SQL2014a, I can access \\ABC\SQL2014a.
-Deleted the share and recreated - same issue.
-Created C:\Test and shared it as SQL2014, cannot access \\ABC\SQL2014. It is NOT an issue with the actual SQL2014 folder.

From internet searches I've found the following solutions do not affect my case:
-Clearing CSC/Offline cache (most common working solution)
-C... Read more

Read other answers

Dear admins, power users etc.
The last 36h hours i spend googling my problem but couldn't get any help to solve this issue. I have multiple Windows 7 machines (32bit and 64 bit) at home.

One machine shows my samba share in the network environment and i can access it via double click perfectly.
Another machine doesn't show my samba share in the network environment. However I can access it via \\Share\mount or via \\ip\mount (after accessing the mount it shows up in the network environment, not sure what causes the problem of not showing it in the network environment initally)
The "headache-giving" machine that i refer to in the introduction doesn't show the share in the network environment nor allowing me to access the \\Share\mount or \\ip\mount but only connecting to the samba share via mounting it as Networkdrive X,Y,Z...
As one can imagine googling this problem is not the easiest task and gives you a lot of false positive results. Trying to access my Share via \\Share\mount or \\ip\mount gives me the following error message:

(i apologize for it being german, however I hope that the smart ones will understand it anyways! )

As 2/3 or the windows machines can access the samba share, samba smb.conf problems can be excluded. So I strongly assume it is a Windows problem. I am running MCAfee Virusscan Enterprise. Windows Firewall is disabled and the machine is also in the same "WORKGROUP" as the samba share.

I really hope anyone of you have an idea tha... Read more

A:Samba Share Networkmounting as X,Y,Z works, \\Share\mount not

The error message is default when system cannot resolve the network address. Something is wrong and it could also be on the other end (Mac or Unix / Linux machine).

On the problem Windows rig, can NET VIEW see the Mac/Linux machine? Can you ping it?


Read other 9 answers

Please assist to know the list of problems that can arise when we disable Administrative shares on Domain workstations (Windows 7, 8.1 and 10), most of the tech threads just say "some services may not function properly"
can someone help to know what are the services

Read other answers

I have a custom built PC that I use for everything, running Windows 7 Ultimate x64. I also have a custom built server running Windows Server Essentials 2012 R2. The 2 are connected to a Gigabit Router, via Gigabit connections. The 2 have been working great together for many months. Now all of a sudden, these last few days I've been unable to transfer files from the client computer to the server. Whenever I do, I get this error message:

An unexpected error is keeping you from moving (copying) the file. If you
continue to receive this error, you can use the error code to search for
help with this problem.

Error 0x800705AA: Insufficient system resources exist to complete the
requested service.
I haven't really done anything different than I normally do, other than maybe install some Windows Updates. I haven't installed any new programs or hardware. All I'm trying to do is move some files over to my network share. The content doesn't seem to matter either. I can transfer small 1-2k text files ok, but anything larger like photos, documents, videos, etc throw up this error. I have noticed that it has a "Try Again" button, and sometimes clicking that works the first time, while other times I have to click it 4 or 5 times, but it does eventually transfer. I thought it might be a user privilege issue (like I don't have permission to move to THAT folder, etc) but I checked and my user account has full read/write capabilities to all folders on the sh... Read more

Read other answers

Why is sharing so hard on windoze???

I have tried everything I could find to get this to work. Seems like renaming the user in 7 has caused the problem. Sharing works fine on a new user that I created but will not work on the renamed account. I even tried this


with no joy.

I would like to keep all the settings in the non sharing renamed account. Can it be copied into a new account then deleted or fixed?


Read other answers

Hi all, I have a weird problem. And also complicated, 'cos not even my CISCO Network teacher has been able to give me a solution. I think I need some smart people here

The thing is that I can't share my printer (connected by USB to my PC) with my laptop on another room, over the local network (in Win7 the name is Home Group).

The printer model is not relevant because time ago I was able to do what I'm trying now.

All my configurations are OK, at least the basic ones, because there's definetely something wrong with my PC, and here's why: if I take my laptop and put it next to the printer and connect it to it (by the same USB cable), I can access the printer with my PC, while it's been shared by the laptop.

That proves that the internal network is fine. Also, all the configurations of the printer and also of the home group are literally same in both PCs, the big one and the laptop.

Both PCs run Win7. I have tried this, Connect to printer error - Microsoft Windows Vista Community Forums - Vistaheads, but it didn't work.

The printer is also properly installed on my PC, it is not a driver problem or something like that.

My AV is ESET ESSBE 4, but I don't think it's related, because I have tried deactivating its firewall, and also, on the laptop the AV is the same and the
printer did work.

The services are also equal in both PC's now. I have even tried changing the network adaptor on my PC (from Ethernet to Wifi). Nothing.

I recently had problems with the home group, but ... Read more

A:Can't share printer on local network (0x00000012 error)

Do you have the Windows firewall turned on? If not you won't be able to share the printer until it's turned back on again.

Once that is done the link below shows some set up procedures that should work for you.

Can't share printer, get error

Read other 5 answers

I am able to connect from XP to a network share at my workplace by giving login/password. However, when I try to connect from Windows 7 i get the error: "specified authentication package is unknown"

However, I am able to connect to another shares. From XP no one is having any problems in connecting to this share at all.

Have googled but to no avail. Found one suggestion to add 'authentication packages' key to registry but it was already present in my Win 7 and with the correct value.

Any help would be appreciated as I am at my wits end with this issue. Win 7 is working flawlessly otherwise. Much much better than XP. Vista was pretty much unusable on my laptop (HP TC 4400 tabletpc)

A:Network Share Error: specified authentication package is unknown

ok, you have specified the problem, but gave no information on any setups of the network(s). how are other supposed to help you unless they have ran into the specific error that you specified?( which i myself do not recall running into)

Read other 5 answers

One of the share path is working in Windows 10 and not working in Windows 7. 
I tired using the IP Address of the share path. Below error received.

Please help how to get this resolved.

Regards, Boopathi

Read other answers

I'm experiencing a weird windows 7 copy error. 
I have a folder that will copy just fine onto another NTFS drive but will say "Error 0x80070032: The request is not supported." when I copy/paste onto my Network drive at E: (mounted using \\server\sharename on E: -- error is not specific to E:,
any other mount point will produce the same error). 
I tried giving generous permissions, removing attributes, etc. nothing worked. I can't reason why it would say this error only for this folder, the other folders are copying just fine.
The peculiar thing is -- If I use "robocopy" it copies just fine onto the network share (note that I'm not using any magical options with robocopy to do this), but it would simply fail when I use the windows explorer copy. 
"Robocopy" is a command I cannot train my users with. I need to know exactly what is causing this error so I can advice users in my homegroup so they can be successful copying to the network drive. Also, it's really very frustrating that a random
folder will fail to copy with this error and a user can just not figure what might cause this issue.
Please help!  Also, please note that I have tried all possible options such as disabling client smbv1, registry entries etc all mentioned on that one & only microsoft KB article that fails to provide a definitive solution. And YES I've tried to
check that Task Scheduler and Events Logger and relevant services are enable... Read more

Read other answers


I have a few problems, with my windows xp, ill start with instant share devices error 2908, i pops when i start my computer, ive read it a HP problem, but i am unable to uninstall it in add/remove programs, as msg says, cannot unintall until other instllation of same program is finished?????, Please help to get me on track, having a nightmare

A:instant share devices internal error 2908

You need to reboot into safe mode and use the add remove programs to remove the programs that came with your HP digital camera. I had this problem pop up after a repair install of XP Home.

There were 4 on mine and I was able to remove 3 of them this way. The fourth I had to remove after I rebooted back into normal mode. I also had to remove the HP image control from the startup folder and reboot yet again.

Everything was OK after that. Presumably you'll be able to reinstall the programs once everything is working properly. I opted not to.

Read other 1 answers


I have a "server" that ran win 7 and which I now updated to Win 10. On this server, there is truecrypt installed and a batch file which I call from a remote computer using psexec. This batch file mounts a truecrypt volume and shares this drive on the network. Sharing is done with a lines like this:

if exist E: (net share E=E:\ /GRANT:Name,Full >nul)

However, in win 10 this doesn't work anymore. The problem is that the command

net share E=E:\

can only be issued from an administrator-cmd now. Is there a way to allow using the "net share E=E:" command from a non-admin-commandline (I am hoping for a registry key...)?
Thanks a lot!

Read other answers

I'm so tired of this error that I could I throw my computer down the window. So the thing is I'm trying to share my mobile connection from my computer to my xbox (which has worked before without any problems) but now when I click on properties on my mobile connection on the share tab to check the "allow sharing" box this error: 0x80004005 along with "undefined error" comes up.

Which seems unsolvable, think I've turned google inside out trying to find an solution. I've only found guys that got the exact same problem, but doesn't get any helping answers.

Sorry for my English, computer terms are a bit tricky to translate from Swedish.

P.S to avoid any unnecessary discussion about how I could want to share mobile connection to the xbox when it's only going to lag, it will not, it works like a dream when it chooses to work..

Best regards

A:Trying to share mobile connection to xbox, error 0x80004005

Check your connection box/modem, restart it, see if that works, if not, then check your xbox connection and your phone connection. If it still dosen't work, then i would consider asking a professional

Read other 1 answers
Q: flip

how do i turn on flip 3d?? in vista it was alredy there but 7 i dont see icon on taskbar.


Switch Between Windows - Flip 3D Shortcut

Read other 2 answers