Over 1 million tech questions and answers.

20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue

Q: 20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue

we have disabled SSL2 & SSL3 and TLS 1.0 also in my server but still showing 20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue.
can you help me anyone ?
Server SSL existing setting screenshot for your reference

Read other answers
RELEVANCY SCORE 200
Preferred Solution: 20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 66.4

Please help with the command to check the version of NTP configured on Windows server 2008 server...

Read other answers
RELEVANCY SCORE 57.6

The question mark is deliberate because this is a 'may be' which (so far as is known) only affects Safari users; http://www.h-online.com/security/ne...nerability-in-Windows-discovered-1398625.html

In common with so many of these reports this could be hopelessly exaggerated and its effects limited to BSOD's, but 64 bit users may want to be on the lookout for further announcements and/or patches.
 

A:Zero day vulnerability in 64 bit version?

I am sure Microsoft is looking at it to verify it is a Windows win32k.sys vulnerability or if the author got it wrong.

It won't take long if it is for real, malware distributors will find a way to use in in windows explorer and possibly other browsers.

Not may people use Safari in Windows, so its low risk.
 

Read other 2 answers
RELEVANCY SCORE 57.2

Does anyone know if this version is causing problems browesing the net? or has it finally replaced Version 4 all over?
 

A:Internet Protocol Version 6

It hasn't replaced version 4 at all.
 

Read other 2 answers
RELEVANCY SCORE 57.2

I am just curious about this protocol. on my desktop computer it shows local access and sometimes shows limited internet access. On my Laptop, wifi puter, the IPv6 is never used, is there a way to utilize this protocol for my laptop and why does the access go from limited internet to Local on my desktop?

Thank you
 

A:Internet Protocol Version 6

I don't know much about IPv6. Even this 'introductory' video is too technical for me in parts!; http://www.youtube.com/watch?v=2wa7y3W2DI0&feature=related

One thing I do remember reading last year, when IPv6 Day was held, was that it wouldn't have much impact on home users until the majority of ISP's enabled the new protocol on their servers. I assume that will cost money so they'll only do it when IPv4 addresses are closer to exhaustion.

EDIT: Attempts to post the video URL seem to produce a 'freeze frame'. Go to www.explania.com and search 'What is IPv6?'
 

Read other 3 answers
RELEVANCY SCORE 56.8

I got a new vista, and I noticed this. Do I need this checked? Am I better off with it checked? What the heck is it/ I've read in many forums where people advise to turn this off, but that's only to fix a problem. What's the real deal holyfield here?

Read other answers
RELEVANCY SCORE 56

Cannot access the Internet after version 10 is installed on my desktop.

A:Network protocol missing after version 10 update

I have a laptop, I found after installing up dates after initial windows 10 install and restarting, I could not connect to the internet and error was missing protocols etc , while I am computer illiterate I rummaged around and found, That by turning off my laptop and then turning on, there was no error and I was connected to the internet, if I just restart the laptop then the error is back and so is loss of internet connection, so while this may be unrelated to your problem and I have yet to get this problem resolved it may help someone get connected, so turn off, not restart.

Read other answers
RELEVANCY SCORE 56

Hello,

I have Internet Protocol V4 settings:

IP adress: 192.168.0.101
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Preferred DNS server: 192.168.0.1

I want to know if there's some way to make shortcut for these settings so I can click on that shortcut whenever I want to configure the Internet Protocol V4?

Thanks,

Read other answers
RELEVANCY SCORE 56

I am using a wireless linksys wrt160n router with a linksys AE1000 usb adapter on windows 7. Up until now I have had no problems. A few days ago, I came home to find that we had had a blackout. I had no connection and could not seem to fix it.
Up until that time, I've always used my network connection 4 for internet access but no matter what I did to I couldn't get a connection. So I thought if I disabled this connection and then enabled it that somehow it would reset itself and I would have a connection. Unfortunately when I disabled it there was no option for enabling it because it disappeared. I currently am using network connection 6, but my internet is at a crawling speed.

I searched on how to reinstall network connections 4 and found this page http://windows.microsoft.com/en-US/windows7/Change-TCP-IP-settings
At the bottom is says to "To install IPv4, run Command Prompt as an administrator, type netsh interface ipv4 install, and then press Enter." I did so successfully and restarted my computer like it said to after inputting the command. But when I brought up my network connections, there was no network connection 4.

I even went to the command prompt and typed ipconfig /all and the IPv4 entries are not there like it used to.
Any help would be appreciated.

thank you

Read other answers
RELEVANCY SCORE 54.8

Hiya

A vulnerability in Check Point FireWall-1 and VPN-1 may allow an intruder to pass traffic through the firewall on port 259/UDP.

http://www.cert.org/advisories/CA-2001-17.html

Regards

eddie
 

Read other answers
RELEVANCY SCORE 50.8

Hello

Here is my log file which i was told to post her after i ran DSS

Thanks

Steve

A:Log File 06 May 20007

Hi MUMFORD54
Describe the problems in as much detail as possible

You missed posting dds's main.txt >
Provided dds.exe is still on your desktop
Please run Deckard's System Scanner again, this time using these instructions:

Click the Windows 'Start' button > Select 'Run' - then copy/paste this into the run box & click OK "%userprofile%\desktop\dss.exe" /config Tick

[x]main log
[x] system restore
[x]temp cleanup
[x]hijackthis
[x] hijackthis ignored
[x] file assosiations
[x] drivers
[x] services
[x]scheduled tasks
[x]file dump
[x]registry dump

Click Scan!

When finished, it shall produce a log for you. Post that log in your next reply.

Read other 2 answers
RELEVANCY SCORE 50.4

I KEEP GETTING A SLOW CONNECTION AND SPEED HANGING , AND WHEN I CHECK INTERNET PROTOCOL IPV4 , IT CHANGES TO ANOTHER IP ADDRESS AND AT SOMETIME IT CHANGES TO A BLANK IP ADDRESS AND DNS AND EVERY TIME I GOT TO CHANGE IT TO (OBTAIN AN IP ADDRESS AUTOMATICALLY ) . Any permanent fix for this issue !!
 

A:INTERNET PROTOCOL ISSUE ON WINDOWS 8.1

you dont need to write in capitals - its considered shouting

Make sure you have the latest driver on the adapter

make and model of the PC
how do you connect to the router by cable or wireless

If the IP is changing then you are possibly connecting to a different network
OR your lease time is very short

lets see an ipconfig /all

ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.​Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)[... Read more

Read other 1 answers
RELEVANCY SCORE 50.4

After booting up my toshiba laptop with a nice new upgrade to XP Pro from XP Home, my computer lags when it's trying to load the programs it should be loading at start up (Norton, printer driver, firewall, etc).Half the time, it'll lag for 2 minutes then start all programs and run as normal. Other half, it'll lag for 2 minutes then pop up the error box "Generic Host Process for Win32 Services...." and it says it needs to terminate the svchost.exe program. Oddly enough, it'll pop up enough of those same exact error boxes for every time the computer has started up since it LAST showed the error box. For example, I restart 6 times, getting a lag every time, and the 7th time when I restart it'll lag PLUS show 7 of those error boxes.My HijackThis log shows A LOT of "protocol" lines regarding Logitech's Desktop Messenger. I've deleted all the Logitech Desktop Messenger files on my laptop, but these lines remain. Is it safe to delete them or do you think it could/would cause serious issues with my laptop? Please see my log below to see the lines I'm referring to.... Thanks....Logfile of HijackThis v1.99.1Scan saved at 2:31:51 PM, on 8/5/2005Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\sv... Read more

A:Can I delete these protocol lines without issue?

Hello rblaude. Yes, you can remove those without a problem.

Cheers.

OT

Read other 1 answers
RELEVANCY SCORE 50

Hello; Yesterday, AVG 2011 did an automatic update on my ASUS n55sf laptop. After reboot, Outlook 2007 displays message " cannot display the view" and none of my folders can be opened. Spoke to AVG and loaded AVG 2012 internet security; same problem. Started outlook in safe mode and attempted to disable avg add on, but get message that I need to be logged on as administrator (I am the administrator and only user of the laptop. Went to program files x86, office 12, outlook and right clicked on outlook logo and selected run as administrator; still cannot disable avg add on, getting the same administrator message. any ideas anyone?

A:outlook 20007 freezes after avg update

You can try to restore your computer, and seriously consider removing AVG and using something better, such as MSE

The choice is yours, please don't feel like I am pressuring you, just a recommendation. To remove AVG, use the correct uninstaller from AVG: AVG | Download tools and utilities

If you do not want to remove AVG, I would recommend bugging them until someone gives you the help you need, or waiting here for some other help from another member.

Do make sure windows is completely updated for compatability and stability reasons.

Read other 5 answers
RELEVANCY SCORE 49.6

Hi,
I have a strange problem with my uncles desktop pc. That pc has to be always on for video recording but once in a while Windows will automatically reboot and i just can't exactly find out why.
But why i did found out is that he's always getting 3 error messages (in the Windows event viewer) about 20 min prior to the unplanned reboot. 
These are the error message in the event viewer:
1) The following fatal alert was generated: 10. The internal error state is 1203 --> Schannel ID3688 --> time: 19:00
2) The same as above on the exact same time with same event
3) RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client --> TermDD ID50 --> Time: 19:48 (about 25 min prior to the reboot)
Who can help me out here. This is driving me crazy. Sometimes we miss days of recording, while we aren't using that PC for other things.
Thanks in advance!

Read other answers
RELEVANCY SCORE 49.6

I did quite a bit of online research prior to asking my own question, but none of  the solutions I've found online really pertain to the issue we're experiencing.  
We have 2 Windows 7 Pro PCs in the office.  They are accessed via RDP from within the same network/location.  The systems that are accessing these 2 PCs are an XP Pro machine and a Mac.  The clients stay connected for randomly lengths of time
(no longer than 1 hour) before the session goes black and disconnects them randomly.  When the disconnect occurs, it's not due to inactivity.  The user has to wait several minutes before they are able to reconnect.  
On the Windows 7 PCs, Event Viewer gives:
Event ID: 50  The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.
Event ID: 56  The Terminal Server security layer detected an error in the protocol stream and has disconnected the client. 
I've seen suggestions of checking registry keys and a lot of suggestions regarding Windows Server and Terminal Server, but they don't apply to our situation.  Please let me know if more information is required.  Thank you!

A:The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.

Hi,

 

Do you enable the
IEEE 802.1x authentication?

 

Regarding the issue, I suggest updating the network adapter driver manually on Windows 7 PCs. Also update the router's driver and firmware.

 

If the issue persists, you could disable the TCP Offload. To do this,

 

a.      
Run the following commands on both the client and the server to disable NIC offloading.

 

netsh int tcp set global chimney=disabled

netsh int tcp set global rss=disabled

 

b.     
Modify the following registry key to disable netDMA on the client and the server.

 

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableTCPA

 

Note: If this registry entry does not exist, right-click Parameters, point to New, click DWORD Value, type EnableTCPA, and then press ENTER.

 

Value: 0

 

You can also refer to the following KB to troubleshoot the issue. Hope it helps.

 

http://support.microsoft.com/kb/2477023


 

Best Regards,

Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 10 answers
RELEVANCY SCORE 49.2

after installing an application, a windows pop up appeared, saying "The program cant start because d3dx9_36.dll is missing from your computer. So, i looked at my DxDiag version, its DirectX11...So what do you think is the problem? i went to this site How to download and install DirectX, but i found a lot version of DirectX, that i don't know which one is compatible with mine so that i can be able to run the program. I've done reinstalling, and still it happens..

Additional info:
win7 64bit OS, sp1
currently running DirectX11

Please tell me which version should i download and how to install it, if it is hard, if it is as simple as this "download and install then run the app" then just tell me please if that's the case. This forum nver lets me down so im counting on you guys...

A:DxDiag Version Compatibility Issue, Which version should i download?

Welcome to Seven Forums mclarren. That dll is from DirectX 9 that dll should reside in both System32 and SysWOW64. The correct download if needed would be

Download DirectX End-User Runtime Web Installer from Official Microsoft Download Center

I can zip up both dll's, but if the download corrects the issue, no need. Let us know. A Guy

Read other 1 answers
RELEVANCY SCORE 48.8

A friend emailed me this link.

http://www.macromedia.com/v1/handlers/index.cfm?ID=23293&Metho
---------------------------------------------------
MPSB02-09 - Macromedia Flash Malformed Header Vulnerability Issue
Originally posted: August 8, 2002
Last updated: August 8, 2002

Summary
Macromedia has recently become aware of a vulnerability where a hand edited malformed Macromedia Flash movie (SWF) header can be exploited to cause a buffer over-write issue which could potentially lead to execution of arbitrary code.

Issues
This can only occur with Macromedia Flash movies (SWF) that have been hand edited with a binary editor; Macromedia Flash the authoring tool will not output movies with this vulnerability.

Solution
Customers should follow the recommendations found in this bulletin and download the newer Flash Player when it is available.

What Macromedia Is Doing
Macromedia has isolated the issue and released an updated player (6,0,40,0) which is available for download on the Macromedia Player Download Center.
----------------------------------------
Click the link at the top of this post to continue and to Download the New Player.
 

A:Macromedia Flash Malformed Header Vulnerability Issue

Thanks Mo' guess I'll be the first here, since I can't disable this stuff, I better take the safe route.
 

Read other 1 answers
RELEVANCY SCORE 47.6

Hi guys

I've a Macbook Pro with the Win7 build 7000 running on it. Everything works fine except the microphone detection of the Realtek HD adapter. the macbook pro only has 2 jacks. one for the headphones and the other should be the mic/line-in.

By plugging in the mic from my headset, the realtek audio manager just shows me an input device instead of the microphone.
The built-in mic from the macbook works fine, but I prefer using my headset for skype.

Is there any workaround to fix this issue? how can i "tell" the realtek audio manager, that the plugged device is a mic?

I already installed the lates realtek HD drivers (2.18) and tried to assign the mic/line-in manually over the registry (Realtek HD Changing Jack output reassignments ( FIX )), but nothing could solve this problem.

here are some screenshots which are describing the issue. yes it's a german installation :-)

many thanks

dumdidum

A:Realtek HD mic detection issue

Hi dumdidum and welcome to Se7en Forums

Referring to your first image, right-click on the BLUE socket and select Connector Retasking...

You should be able to set the appropriate option here.

Read other 4 answers
RELEVANCY SCORE 47.6

Hello,
 
Long story short, I had a malware infestation on my laptop.  I currently have run the latest versions of the following:
 
Avast - Full scan
MBAM - Full scan
adwCleaner
RogueKiller
Trend Micro Anti Threat
TDDS
 
Each one of these seemed to find things here and there, but I still have the problem. Combofix and aswMBR will not run due to "A device attached to the system is not functioning" error.
 
In Safe Mode Combofix will start to run but then I get a BSOD and reboot.  asw will come up but won't scan says "Error loading driver" when it starts then "Scan Error" when you try to run a scan. 
 
I have two particular URL's coming up that Avast is currently blocking:
www.babaloonx.com and www.colboltuz.com plus one URL that is just an IP.
 
Any help is appreciated!

Brian
 
 

A:Malicious URL Detection Issue

Read the guide here
http://www.bleepingcomputer.com/forums/topic34773.html
and create a topic here with logs
http://www.bleepingcomputer.com/forums/forum22.html
Good luck

Read other 1 answers
RELEVANCY SCORE 47.6

I just had to restart my computer after a system-wide lock-up, and after I booted back up, the OS refused to see my WIRED laser mouse! It's never done this before, and now, after restarting AGAIN, I find it STILL won't find it, or even my back-up mouse! Does anyone know why this is?

A:Driver Detection Issue

Hello NFSRacer,

Unfortunately I have yet the need to use Safe Mode in Windows 8, so I am going to give you a link that gives instructions on how to...

How To Boot Into Safe Mode On Windows 8 (The Easy Way) - How-To Geek

I would like you to attempt to load Windows in Safe Mode to see if the mouse is recognized at that point.

Also, this is a USB mouse? Have you tried other USB ports?

Read other 6 answers
RELEVANCY SCORE 47.6

Hi, first post here for me.. After successfully installing the latest version of Java (6.0.260) and then running the detection tool, it keeps telling me it does not detect Java on my computer. I've tried rebooting after install, uninstalling and reinstalling, using the offline version and every troubleshooting tip listed after the non-detection message. I'm using IE10 with the 32-bit browser. Java used to run fine until lately. I'd appreciate any suggestions on other solutions. Everything I've tried has failed. Thanks!

A:Java detection issue

Hi welcome to Seven Forums,
Open Internet explorer,
Use Alt+TA or Gear symbol on the top right and Manage add-ons
Click on Show all add-ons on the left middle of you screen,
Then see if Java is Enabled.
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7
Also you might switch to Software rendering,
Alt+TO
Internet options/ Advanced/ Check the top box/ Apply and Okay.
http://www.sevenforums.com/tutorials/149063-internet-explorer-gpu-hardware-acceleration-turn-off.html

Read other 5 answers
RELEVANCY SCORE 47.6

Hi

I'm having problem finding the new HDD (additional one) in 'My Computer'. I connected an additional HDD into CPU and started my PC. After startup, it detected the new hard drive and installed (auto) and said 'Successfully installed' (in balloons). But now I don't see any icon for the new installed hard drive in 'my computer'. Then I shut down the pc, disconnected, then reconnected... did allover again. But the problem remains!

What might have gone wrong? Where's the problem! Please help me guys
 

Read other answers
RELEVANCY SCORE 47.6

So...
Having a small issue with my laptop. i looked all over the internet and alas i came up with nothing whatsoever.
I ordered my laptop off of microsoft website because they had a deal for students, this was about 3 years ago. 
The other day i was watching a stream on my laptop and it started making clicking noises and froze my computer, i restarted chrome and everything worked fine again.
then about a week later watching another stream, the clicking noises began again only this time it shut my computer off. so i turned it back on and this error came up(No boot device detected. strike F1 to retry boot Strike F2 to run setup utility or F5 to run onboard system diagnostics.) 
So naturally i clicked retry boot a couple million times but to no avail nothing worked.
So i ran my onboard diagnostics. and it came up with hard drive not connected. so i was like okay my hard drives fried. so i connected a different one... same error message
 
So now ive come here for solutions, ive never in my life resorted to posting online about a situation. but this is just insane. either the connection from my computer to my hard drive is fried, Both my hard drives are fried or something in the softwares messed up. 
All im asking for is a solution... Thanks.
~Var
 

A:Hardware/Non Detection issue

The hard drive is indeed toast -- if you post the model number (i.e., Inspiron N5110, 5521, etc.) someone can recommend a replacement drive.
If you did not prepare a set of recovery media when the system was new, you'll also need to contact Dell to purchase that now, as you'll need it to reload the operating system once you replace the faulty drive.

Read other 1 answers
RELEVANCY SCORE 46.8

To enable movie viewing on 55" LCD TV

This is a pain in the rear for me but it is the only way to get the HDMI audio recognized as a valid option in Audio Playback devices. (Video always works but the audio is says not connected)

To get the HDMI Audio detected, I have to....
First - On my TV I have to select the HDMI channel that is connected to my PC
Second - I have to un-plug and plug-in the HDMI cable. (I can hear the Windows 7 found hardware sound)
Third - Now I can select HDMI as my default audio device (everything works great)
I usually have to repeat this process any time the PC or TV gets shut off. I am worried about wearing out the HDMI port by plugging and un[lugging so often. This can't possibly be the way it is supposed to work.

This is not an intermittant issue - it is a matter of the ATI HDMI detecting the audio connection and is very repeatable and consistant. All drivers ATI and VIA audio are the latest to date as of today.

Maybe it is the Plug&Play component - TV has to be on when turning on the PC or I have to manually force the detection process (as above)

Video = ATI 4550
MOBO = ASUS P7P55D-E LX

A:ATI HDMI Detection of Hardware issue

I have read many post on this issue and First of all yes the TV must be on at all times on the HDMI signal if you don't want the signal broken don't turn the tv off use you're power saving feature

Let windows turn the monitor off for you that way simple mouse movement will bring back the screen also you should be able to right click and disable onboard then enable the HDMI sound by right clicking

I might add using power saving feature is the only way to keep from breaking the HDMI connection also i don't advise any heibernation or sleep mode because that will just break the signal the best thing to do is let windows turn the monitor off but do not put your machine in sleep mode or any other power save featurn just treat your tv as a monitor

I find this the only and best way to work the ati cards and yes you keep unplugging and plugging the HDMI cable something is bound to go wrong eventually

Read other 2 answers
RELEVANCY SCORE 46.8

Hello guys.
 
I have a small issue with a drive being detected from within my PC that works from an external caddie.
 
For a few years i have had two drives inside my system. C drive and F drive. I recently removed both drives when i went off to India for a few weeks for security reasons. Today i find the F drive is not showing up. It is listed under "Show hidden hardware" in the profiles. I opened up the PC and swapped the ribbon cables around and rebooted. It started to install new hardware and stated it had installed it because i seen the name of the installed hardware (The F drive) yet it was still not listed in "My Computer" alongside the C drive. I then removed it an placed in in an external caddie and booted again. I got the same install message ( I had uninstalled the driver prior just in case) and it installed from the caddie and works.
 
I can not run it from there because i have two other drives that need to be listed for my Music Studio when it scans for files needed to open past and present work that uses files located on those drives my name. The issue can not be the cables as they both run C drive internally. 
 
I will try again later to install it from inside the PC as my main slave drive but it seems null. The issue may be software based or configuration based. But so far , i am mystified by this issue. 
 
Any ideas?
 
Thanks in advance.

Read other answers
RELEVANCY SCORE 46.4

I am trying to install a raptor x 150 in my computer. The motherboard picked it up, and windows picks it up. however Acronis does not and neither does the windows installation. I would like to clone the drive if that is possible but first the drive needs to be recognized.
I have formatted it in windows 7 64 as an active partition NTFS. Any help is greatly appreciated
 

A:Solved: Raptor X 150 and windows 7 64 Detection issue.

I fixed the Problem. I used Data lifegaurd tools. and just set the drive up for xp. then windows and Acronis picked it up Now I've got it set up and running smoothly on Win7 64.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Error messages have been popping up for a while now saying how I am low on memory, but until now there have been no serious consequences. Now, I can only watch 1 YouTube video at a time and even then, it will usually crash after about 5 minutes. I can't have more than 1 tab open and in general the laptop is slower. It looks like the computer is only able to use 2GB of the 8GB that it knows is installed for some reason. Should I open it up and try to unplug and re plug the RAM back in? I've used CCleaner to clear anything that might be taking up memory and nothing is working. I've also done a full scan with Malwarebytes and come up with nothing. Any help is appreciated.

I am not sure what MOBO I have, but the laptop model is: Acer Aspire V5-573-9863

In addition to this memory issue, I used to have a problem where the CPU would sit at 60%-80% usage for no reason with no applications running, but that issue seems to have sorted itself out. Thought I might mention it just in case it is related. I just remembered that the CPU usage only jumps and sits when I open the Downloads folder in windows explorer, and I can fix it by restarting the Windows Explorer process, but if anyone has any tips on how to deal with that as well, I would appreciate it.

A:Oddly high RAM usage/ detection issue

Hi and Welcome to TSF!

Let's take a look at your system hardware specifications. Please follow this guide on how to get those specifications:

How to find your system specifications - Tech Support Forum

Read other 3 answers
RELEVANCY SCORE 46.4

Error messages have been popping up for a while now saying how I am low on memory, but until now there have been no serious consequences. Now, I can only watch 1 YouTube video at a time and even then, it will usually crash after about 5 minutes. I can't have more than 1 tab open and in general the laptop is slower. It looks like the computer is only able to use 2GB of the 8GB that it knows is installed for some reason. Should I open it up and try to unplug and re plug the RAM back in? I've used CCleaner to clear anything that might be taking up memory and nothing is working. I've also done a full scan with Malwarebytes and come up with nothing. Any help is appreciated.

I am not sure what MOBO I have, but the laptop model is: Acer Aspire V5-573-9863

In addition to this memory issue, I used to have a problem where the CPU would sit at 60%-80% usage for no reason with no applications running, but that issue seems to have sorted itself out. Thought I might mention it just in case it is related. I just remembered that the CPU usage only jumps and sits when I open the Downloads folder in windows explorer, and I can fix it by restarting the Windows Explorer process, but if anyone has any tips on how to deal with that as well, I would appreciate it.

A:Oddly high RAM usage/ detection issue

Hi and Welcome to TSF!

Let's take a look at your system hardware specifications. Please follow this guide on how to get those specifications:

How to find your system specifications - Tech Support Forum

Read other 3 answers
RELEVANCY SCORE 46

Good day,

I have an unusual situation with my HDMI and would like some advice or ideas.

I have 2 TVs with HDMI input, both LG (I believe 32LH20R and 22LH20R).

When I connect my hdmi to 22lh20r, the sound device says "not connected".
When I connect to 32lh20r, everything works fine.
If I connect to 22lh20r after connecting to 32lh20r, the sound device is now detected!
But when I reset my computer, the sound from 22lh20r says "not connected" again.

I tested two notebooks on it so far, and could reproduce on both. One with a GeForce 9600M GT and the other with a GeForce GT 540M.

I think that this could be some issue with the TV, but since it work after connecting to the other TV, I was thinking if there is a way to force the detection, or to force the driver from one TV to the other, or something like that.

Thanks in advance.
Gui

A:Issue with HDMI sound detection - unusual situation

Additional information:

I tryed to override EDID, with phoenix edid editor and monitor asset manager, but had no success with that. Turns out that they only collect the first 128 bytes from the edid, leaving the CEA extensions out, and this would be where the EDID stores whether the monitor has audio or not. =/

Also, it seems like it's not possible to "force" the playback device to "be detected", or at least I didn't find a way so far.

If anyone could help with EDID overriding, or this way to trick windows into believing HDMI sound is connected, I would appreciate a lot!

Thanks,
Gui

Read other 2 answers
RELEVANCY SCORE 46

Hello all, First, I apologize for my english, I know I'm not the best at this language but I hope you will understand my problem.  I've got a Thinkpad T560. This laptop was with Windows 7 and I upgraded it to Windows 10. Unfortunately, when I plug my HDMI cable, I have the image on the second computer but no sound. All my drivers are up to date.Furthermore,  I can't find the HDMI device (my TV) in the taskbar  (I mean in the right-bottom corner).  I have tried a lot of solutions:- Update drivers- Click on the sound icon and show the disabled devices in the playback menu- Update drivers from Device Managers etc..  Could you please help me to find a solution ? Thanks.

Read other answers
RELEVANCY SCORE 45.6

Hi,
I got a problem with the Internet Explorer 11 installation I received through Windows Update. It is on a
Windows 7 x64 SP1 computer.
The installation failed, and Internet Explorer 11 doesn't appear under the Show Installed Updates section of Programs and Features.
Because of that, Windows Update tries to re-run the update, but keeps failing everytime.
My first idea was to download the IE 11 installer for Windows 7 x64 from Download Center and launch it; it fails with the error message "A more recent version of Internet Explorer is already installed".
When launching IE, effectively, the version is 11.0, but if I try to install an update for IE, like an IE 11 language pack or just a security update, it fails saying it doesn't apply to this system.
So basically, the IE installer detection logic says IE 11 is installed, while Windows Update says it is not, as for other updates related to IE 11. I have a tendency to believe Windows Update since it doesn't appear in Show Installed Updates.
I tried removing the HKLM\Software\Microsoft\Internet Explorer registry key and its equivalent under SYSWOW64, no result. I also deleted the iexplore.exe file under Program Files\Internet Explorer and Program Files (x86)\Internet Explorer, no result. Removing
those files is not easy since you have to take ownership on each of them because of the default permissions that are very tight.
Does someone knows the detection logic of the IE 11 ... Read more

A:How to force Internet Explorer 11 reinstallation after failure (detection issue)?

it sounds like IE11 is partially installed.
you may have some success by performing this uninstall method (expect a couple of warnings/errors during the process)
Open an elevated CMD console (Run as administrator)
FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*11.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /norestart"Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.

This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Read other 5 answers
RELEVANCY SCORE 44.8

My laptop is T430 of Lenovo. I have two drives installed on my computer, one is SSD (128 G, PLEXTOR), another is HDD (500 G, Samsung). Now I have encountered a serious issue that I could not find the HDD in my Windows 10. Almost two weeks ago, I found my laptop crash frequently. I think there is an extreme incompatibility between the Windows 10 and SSD. I even reinstalled my OS for several times. But it still crashed. Even I opened a simple word file, it does not respond. Two days ago, the issue got even more serious. When I boot my system, I found a problem with "2100: Detection error on HDD0 (Main HDD)". It suggests me to press the "ESC" button to enter into the OS. However, I could not find my HDD on my computer anymore. I have some paramount important data and files in this drive.  Could some friends provide some meaningful suggestions of recovering data and files for me, please?  I'm very anxious. Thank you very much!

Read other answers
RELEVANCY SCORE 44.8

I've got a really strange problem, that makes it really difficult to post any diagnostic information about the problem. I've tried running HiJackThis, MalwareBytes anti-malware, Trendnet housecall online scanner, GMER, ad-aware, Spybot S&D, RootRepeal and dds.scr. The results are pretty much the same for all of these programs. The scan/analysis starts, sometimes it gets partway through scanning, and then the application window gets closed. After this happens, in the case of .exe files, the resulting program is rendered useless, in that further attempts to launch it result in a "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." and you also cannot rename, or delete the file.

Trend-net housecall is also pretty interesting, in that it runs inside the browser, and after it was terminated (part way through the scan) iexplore.exe now exhibits the same error in not being able to launch. This not being able to launch persists across reboots also. I then installed firefox.exe on the system, was using it for a brief period, tried trend-net housecall and now it too is showing the error in not being able to launch.

dds.scr is able to be to be re-launched, and it brings up the black command window type screen, but never brings up the notepad windows. It seems unaffected by the termination behaviour, and is able to be re-launched.

I was able to run A2 anti-trojan, and do have a log of what it... Read more

A:Strange malware issue - unable to use detection tools or virus scanners

Hi Thomas Lovie,Welcome to BC HijackThis forum. I am farbar. I am going to assist you with your problem.Please refrain from making any changes to your system (updating Windows, installing applications, removing files, etc.) from now on as it might prolong handling your log and make the job for both of us more difficult.I share your academic interest. So let's have a go at it.Download and run Win32kDiag: Download Win32kDiag from any of the following locations and save it to your Desktop. Download Win32kDiag (Win32kDiag.exe) - #1 Download Win32kDiag (Win32kDiag.exe) - #2 Download Win32kDiag (Win32kDiag.exe) - #3 Double-click Win32kDiag.exe to run Win32kDiag and let it finish. When it states "Finished! Press any key to exit...", press any key on your keyboard to close the program. Double-click on the Win32kDiag.txt file that is located on your Desktop and post the entire contents of that log as a reply to this topic.Next......

Also post the A2 anti-trojan log.

Read other 30 answers
RELEVANCY SCORE 44.8

Hello
I want to put info in easy to read format as below:

Personal profile
----------------
I am not a newbie to computers and have been using/modding OS/hardware since last 10yrs or so (though personal desktop/mobile/tablets only). Everything from Formatting, imaging, troubleshooting(though stuck on this), Ramdisks, water cooling, etc etc etc.
So when i inform you of the situation below , you can take it that what i am writing below is the exact scenario.

Computer Profile------------------
TSG Report:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft(R) Windows(R) XP Professional x64 Edition, Service Pack 2, 64 bit
Processor: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz, EM64T Family 6 Model 30 Stepping 5
Processor Count: 4
RAM: 16374 Mb
Graphics Card: ATI Radeon HD 5400 Series, 1024 Mb
Hard Drives:
C: Total - 61055 MB, Free - 51011 MB;
D: Total - 10252 MB, Free - 384 MB;
E: Total - 216587 MB, Free - 6254 MB;
F: Total - 61051 MB, Free - 6068 MB;
G: Total - 153699 MB, Free - 10033 MB;
H: Total - 21289 MB, Free - 7471 MB;
I: Total - 717818 MB, Free - 675210 MB;
J: Total - 11633 MB, Free - 11552 MB;
R: Total - 7169 MB, Free - 6087 MB;
Motherboard: ASUSTeK Computer INC., P7H55
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Everest Report:
See attachment for Full Computer configuration (including bios and hardware)
View attachment Report.txt

just in case, CPU Overclocked by ~ 27-30% to 3.4 to 3.6 Ghz &
FSB to 200Mhz (50... Read more

A:Kingston SSD and Asus AMI BIOS detection Issue (NTLDR)> Very weird> Not a Noob> Help

No SP3?

Anyway this will bump you.
 

Read other 2 answers
RELEVANCY SCORE 44

I am having difficulty with my ASUS SDRW-08D1S-U external optical drive. My computer is an ASUS UL30A notebook with Windows 7. The strange thing is that it was working initially, but now a few days later, it stopped working for some reason. If I go to My Computer, I can see my harddrives (C and D) listed, but not my optical drive. If I go to Control Panel, and click on Devices and Printers, I see my optical drive listed under Devices as SDRW-08D1S-U, with a small yellow triangle icon with an exclamation point on it. If I double click on it, and then click on the Hardware tab, it states at the bottom – “Device Status: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.” If I click on the Properties button, it basically says the same thing, with the addition of: (Code 39). I have tried updating the driver, and it states that I have the appropriate and latest driver. I have tried disabling and enabling driver. I have tried right clicking on the icon and Troubleshooting.

Finally, I tried uninstalling the driver. And then when I plugged the drive back in, it states that the “Device driver software was not successfully installed.”

I am using the supplied USB Y cable with both ends plugged in. I have tried it also with only one of the two ends plugged in, and also with regular non-Y configuration USB cables.

I will add that I never installed the original software on the CD that came with the drive. I was about to install it when ... Read more

A:Driver detection/loading issue with ASUS SDRW-08D1S-U external optical drive

No replies yet...I guess there is no easy fix for this... I'll probably put up the drive for sale and get something else...
 

Read other 3 answers
RELEVANCY SCORE 43.2

I have emailed spreadsheets created in Office 2003 to other staff members running Office 2007. They can open the attachment, work on the spreadsheet, save and close them. However, if they go back to the document later, it can't be seen. I say that deliberately; if you try to click on the document to open it, you will get the "can't open it it's already open" message. So it's there, somewhere, but nobody can see it.

I downloaded the compatibility patch from Microsoft, but no help.

What is up with this? Leave it to Microsoft to create a new program that instantly renders your old software obsolete.
 

Read other answers
RELEVANCY SCORE 43.2

I have a form which has a subform called SearchMainSub with displays data from the following:

Me![SearchMainSub].Form.RecordSource = MyRecordSource
'
'If no records match criteria, display message and move
'focus to Clear button
'
If Me![SearchMainSub].Form.RecordsetClone.RecordCount = 0 Then
'MsgBox "No Maintenace Records Found", 48, "No Records Found"
Me!Clear.SetFocus
Else
'
'Enable control in detail section

The problem that I am having is that it only displays the first record. I have tired all of the options in the data field for RecordSet Type. It still only displays the first record. Anyone have any ideas? I hope this one is as easy as the other question I asked.
 

A:Solved: Access 20007 Record Display 1st record only

Read other 6 answers
RELEVANCY SCORE 43.2

Okay i have turned my pc on after not having it on in 3 months (due to having to buy a new graphics card) anyway everything was running smooth untill i heard a few beeps only to see that avira has detected few viruses i had a choice to either remove or ignore so i pushed remove 10 minutes later avira is detecting the virus again so i click remove and then do a quick scan with Malwarebytes and it did not detect anything so i did a full scan with my Avira Anti Virus and it found 1 warning 13 hidden files and 30 detections now i would like to know what to do from here to completely get rid of the 30 detections that it has found the two that it has detected look like this: TR/BHO.ZWANGI.Trojan TR/GerVar.EJ Trojan there are 30 of them in my Avira quarantine so what i would like to know is where to go from here thank you.

A:avira virus detection beeps with detection pop ups

Hello,Please follow the instructions in ==>This Guide<==.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<==If you can produce at least some of the logs, then please create the new topic. If you cannot produce any of the logs, then post back here and we will provide you with further instructions.

Read other 2 answers
RELEVANCY SCORE 43.2

Okay i have turned my pc on after not having it on in 3 months (due to having to buy a new graphics card) anyway everything was running smooth untill i heard a few beeps only to see that avira has detected few viruses i had a choice to either remove or ignore so i pushed remove 10 minutes later avira is detecting the virus again so i click remove and then do a quick scan with Malwarebytes and it did not detect anything so i did a full scan with my Avira Anti Virus and it found 1 warning 13 hidden files and 30 detections now i would like to know what to do from here to completely get rid of the 30 detections that it has found the two that it has detected look like this: TR/BHO.ZWANGI.Trojan TR/GerVar.EJ Trojan there are 30 of them in my Avira quarantine so what i would like to know is where to go from here thank you.DDS (Ver_10-03-17.01) - NTFSx86 Run by DJ at 19:40:17.32 on Thu 09/09/2010Internet Explorer: 7.0.5730.13 BrowserJavaVersion: 1.6.0_20Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1023.518 [GMT -7:00]AV: AntiVir Desktop *On-access scanning enabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}============== Running Processes ===============C:\WINDOWS\system32\nvsvc32.exeC:\windows\system32\svchost -k DcomLaunchC:\windows\system32\svchost -k rpcssC:\windows\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\windows\system32\spoolsv.exeC:\Program Files\Avira&... Read more

A:avira virus detection beeps with detection pop ups

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEmsconfigsafebootminimalactivexdrivers32netsvcs%SYSTEMDRIVE%\*.exe/md5st... Read more

Read other 2 answers
RELEVANCY SCORE 41.2

I keep getting a message on numerous log in's stating "You appear to be using an old version of Internet Explorer" yet I have IE9 and keep my system updated. Java is current, Flash is current and any other add on's are updated. I have done a registry check and clean, with no change. I uninstalled Flash and Java and reinstalled with the new versions again with no change. Any one have any other ideas?

A:IE 9 Old version issue???

In case you have both the 32 and 64 bit versions make sure you're fully updated in both.
IE>Help>About

Read other 3 answers
RELEVANCY SCORE 40.8

I recently bought a new DVD RW drive to replace my old one which had a burnt out laser. When I put in the drives I set up my secondary hard drive and my new drive as cable select and attached the master connector to the hard drive and the slave connector to the DVD. I booted the system and immediately got a boot error saying it couldn't locate either of the IDE drives. So, I spent the next hour or so trying every possible jumper combination setting and got the error no matter what upon boot. Finally I put them both back to CS and just skipped past the error because I was sick of messing with it. To my surprise, the drives showed up in My Computer and functioned but at a very very slow speed. I ran a PC Pitstop scan and it showed a drive speed of 2mb/sec which is really slow. So, clearly something isn't being detected properly. For some reason also, my BIOS doesn't have any "auto-detect" option to try to detect attached drives so in the BIOS it just has two unknown devices attached to the primary and slave IDE drives.

Any help would be much appreciated.... thanks !
THanks
 

A:Solved: IDE Hard Drive and CD drive detection issue

And the make and Model of your PC???????

my BIOS doesn't have any "auto-detect"Click to expand...

use "Load defaults"
 

Read other 2 answers
RELEVANCY SCORE 40.8

Dear Team member,
First I have a windows 7 OS - 64 bit (not Pro nor Ultimate).
I have installed bitlocker on a Seagate Expansion portable drive on my old laptop with an XP or older OS (now scrap) and I have set a password.
I have the password but I want to remove completely.
I tried several Seagate softwares and searched for Bitlocker programs that could delete the password but without any result.
Would you kindly assist me in deleting the password that locks the access (not encryption) to my external HD.
Thank you,
nagbay

Read other answers
RELEVANCY SCORE 40.8

I have an MSI gaming laptop (Model: GX720). It came with Win7 32bit and I decided to install the Win7 64bit version. My system is capable of running the 64bit version of Windows 7 (According to Performance Information and Tools and Windows 7 upgrade advisor). I tried installing Win7 64bit and when it finishes it hangs on "Starting Windows logo", I noticed that the HDD's flash light stops flashing, I left it there for about 10 minutes and nothing. I also tried "safe mode" and I noticed it hangs on "CLASSPNP.SYS".

I have installed 32bit from the same DVD and it installs successfully. Only the 64bit version seems to fail, but, only on my laptop because on my mom's, my brother's, and my girlfriend's laptop -64bit and 32bit works perfectly with the same DVD I'm using to install my 64bit version. My system's specs are:

-Intel? 45nm Montevina Core™ 2 Duo Processors P7350 2.0GHz - 2.4GHz 3MB Cashe 1066MHz FSB (Centrino 2)
-4.00GB DDR2-800MHz Dual Channel Memory
-NVIDIA? GeForce?130M-GT 512MB DDR3 + Turbo Cache - 17" WXGA (1600 x 900) TFT display ACV
-SATA Hardrive 320GB

Any ideas? Thank you.

A:Win 7 64bit version issue

Googling "CLASSPNP.SYS" and windows 7 finds lots of links about BSoD's and failed boots. Sadly, there don't seem to be any solid fixes, but there are some suggestions. Make sure your BIOS settings are set to "Default" is one of them.

Also, I had this issue when I tried to put 8 Gig of ram in my VAIO SR290 notebook. Win 7 x64 wouldn't boot up, and I couldn't successfully re-install it. x64 Ubuntu worked fine with 8 Gigs and Win 7 32 bit worked fine with 8 Gigs installed.

I took out 2 Gigs and all was well. Win 7 x64 worked fine with 6 Gig. You could try removing some ram and see what happens.

Read other 9 answers
RELEVANCY SCORE 40.8

Hi,

Chrome recently got updated to 25.0.1364.152 m.

One thing I noticed though that it does not preseve webpage settings any longer.
Try to zoom out any page, close Chrome and open the page again, it is back to its original zoom.

I have been using Chrome for a long time and this bug is very annoying indeed....


BBDS

A:Chrome Version 25 issue.

I use the same version and don't have that problem. It remembers my last zoom level after exiting and restarting Chrome.

Perhaps try a reinstallation of Chrome to fix the problem? Or possibly resetting Chrome using this guide:

Chrome Browser - Reset to Default

Regards,
Golden

Read other 3 answers
RELEVANCY SCORE 40.4

We have 5 HP all in one Desktops all purchased about 8 months ago, the desktop I use is causing problems with networking, all the desktops run on the same network, my desktop is unable to see networks via the file explorer in the "This PC" Section but if I us the "quick access" section I can see previously used folders and back track that way, the internet works fine and can store data on the NAS system on the network via the folders I back tracked on, all the other computers inc mine have permissions set, they all worked fine until about a month ago and some of the files I had backed up started showing a 2004 date so I did a system restore and the computer (mine) shut down and would not restart, I eventually did a fresh re - install but still not working properly as I could not connect to a invoicing system that had worked fine since they were new, are there any setting I could look for? I have had a friend who works on computers but he is unable to come up with any answers, I have contacted HP and they said if its a network issue they cant help, I am beginning to wish I had stayed with Win 7, never had any issues but since we fitted Win 10 its very frustrating if there is a problem it takes longer than normal to sort.
I have done another re - install to no avail, anyone had similar issues?
Phil

A:Network issue on Win 10 Home version

If you can connect to others on the network through Quick Access, but just can't see their PCs in File Explorer, then your networking is working OK, but you may have Network Discovery turned off. Check in Control Panel - Network and Sharing Centre - Advanced sharing settings...

Read other 0 answers