Over 1 million tech questions and answers.

ieee1394 irq assignment

Q: ieee1394 irq assignment

I am trying to reassign an irq for a sony ieee1394 card. I added some com ports in 4 and 5, and it is in 10 I think. It has to have an isolated irq. How do I move it over?

qg

RELEVANCY SCORE 200
Preferred Solution: ieee1394 irq assignment

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: ieee1394 irq assignment

Read other 11 answers
RELEVANCY SCORE 49.6

I am using an Acer Aspire 380 with XP, SP2, in my studio.
The machine comes with 2 - IEEE 1394 ports.
They are not mounted on a plug-in PCI interface card but - originate from the main, system motherboard.

There is a 4 pin 1394 port in the front of the PC that is located on a circuit pack that slides into one of the drive slots. This circuit pack also contains some USB ports. These jacks are clearly visible on the front of the PC.

In the back of the machine, there is a 6 pin, 1394 port. This one is hard mounted to the system main motherboard.

When I plug my IEEE1394 device into the front jack, the PC recognizes new hardware and the devices works fine.

When I move this same device to the back of the machine and plug it into that jack (using the correct 6 pin cable), the new hardware is not recognized and, the device does not function.
The 1394 device clearly is getting power via the 6 pin cable but the PC will not recognize it.

I called Acer's support line as well as searching on line.
The first person I spoke with didn't know what IEEE1394 was.
The 2nd person said that here was no front 1394 jack on the 380.
She finally went and looked at at a 380 and saw the jack on the front.
However - she had no idea why the rear jack would not recognize new hardware.

I have tried to find any info available to enable the rear jack - pin strapping, software, BIOS etc but have not been able to find anything.

Acer said to send in the machine for repair.

Any advice would... Read more

Read other answers
RELEVANCY SCORE 49.6

Need a card for my puter to transfer digital video. Any recommendations? Anything I should know as I've just recently switched from my old analog Camcorder to digital and have not yet transferred. I used to use a capture card, but as I understand it, the IEEE394 is the best way to capture digital.
 

A:IEEE1394 connection

Read other 16 answers
RELEVANCY SCORE 49.6

I have a Toshiba Satellite Notebook with a IEEE1394 port running on Windows XP. I was using it to transfer video one day and the computer failed and needed to be restarted. Now the computer does not seem to recognize when anything has been plugged into the port. Both my videocamera and my mp3 player still recognize that they have been plugged into the port, but the devices do not appear on the desktop or connect with any programs... Can anybody help?

Thank you.
 

A:Loss of IEEE1394

You may need to just reinstall firewire card driver. Look in Device Manager and see if there's a yellow. If not try changing the driver. You should have a choice of windows generic or Texas.
 

Read other 3 answers
RELEVANCY SCORE 48.8

This problem results from cross contamination of two burning software repetitive uninstalls reinstalls compounded by two firewire card pcmcia swapouts

The nt kernel gets tweaked?

And then there is no engaging of drive recognition via polling?

The internal dvd burner atapi interface mounts always but likely thru hard rom command.

The os is xp pro sp3, laptop is upgraded gateway m305c
 

A:ieee1394 ext burner won't mount

try removing the 1394 card and all drivers relating to it and start
over from scratch.

connecting with a firewire cable. it maybe won't work with the USB one that comes with the camcorder. the issue was fairly common after sp2 was installed, so it must be a recent change.

or Try system to restore to a point when all worked ok.
 

Read other 3 answers
RELEVANCY SCORE 48.8

Hello

I bought a external HDD that has a eSata output. My PC has USB 2.0 and ieee 1394 inputs. I have currently attached the External HDD to the USB port, but the data transfer is slow.

Will using the ieee 1394 port help with the speed? Is there a eSata to firewire cable or adapter? Can anyone help me find one if it increases the data transfer speed?

Thanks
 

A:eSATA to FireWire (IEEE1394)

Rick said:





Firewire will only be marginally better than USB 2.0, even if you could get it to interface with it. We're talking like 35 seconds to transfer a large file instead of 40 seconds.. That kind of difference...

There is no eSATA to Firewire adapter that I'm aware of and that isn't what Firewire was really intended to do. There are eSATA to USB adapters, but that would be pointless since you'd still be limited by the USB bus.

If you're using a desktop, you can possibly add an eSATA PCI/PCIe card (far faster than either Firewire or USB). They are very inexpensive ($10-15).Click to expand...

Thanks, Rick. You confirmed what I was thinking.

Can I replace my firewire card with an eSATA PCI/PCIe card (http://www.newegg.com/Product/Product.aspx?Item=N82E16816132014) without hassle? How about power requirements?
 

Read other 3 answers
RELEVANCY SCORE 48.4

I have an XPpro machine with a firewire card that used to work fine. After a crash, I've gotten the machine back running fine again other than this Firewire card. Going to most sites, MS included; the drivers are native to your OS and aren't needed separately. My problem is, so what happens when they aren't? I cannot get this 1394 Adaptec card to work properly (yellow ? in my device mgr). SOMEWHERE there must be an opportunity to see the file names necessary and even download the driver files. I started to try "Driver detective" or "PC Unleashed" but after having lost my Internet connection (regained now), don't think I'll put that level of trust in a program like that again. I suspect I'm missing a single file for this card - just don't know the name of the file to hunt for. TIA for any help.
 

A:IEEE1394 Firewire driver for Windows XP

Check the card manufacturers website (ie: you mention Adaptec) for the drivers.

If drivers are really not needed, then the card is faulty or Windows/registry is corrupt.

Also, try moving the card to a different slot on the PC.
 

Read other 1 answers
RELEVANCY SCORE 38.8

Anybody have any suggestions on where to start? thanks

You are part of a software development team. I am your project leader. Our assignment is to develop a virtual calculator for the University. We have decided to develop the calculator using C++. I have given you the task to develop another math library called (arrays.h). In this library you are to develop the following functions:

add, subtract, multiply
These functions will take an array of numbers, the array size and two integer numbers as their parameters. The two integer numbers represent locations in the array. It will add, substract, or multiply the numbers at the two specified locations in the array return the result.
It should be able to handle arrays that are doubles, ints, and longs.
Return values should be of the same type as the array.
divide
This functions will take an array of numbers, the array size and two integer numbers as its parameters. The two integer numbers represent locations in the array. It will divide the first number located at the position designated by the first integer by the second number located at the position designated by the second integer parameter. It will return the result.
It should be able to handle arrays that are doubles, ints, and longs.
If the value of the second number is zero, this function will display an error message to the screen and return -999 .
Return values should be of the same type as the array.
negate
This function will take an array as its first para... Read more

A:next assignment :-)

Read other 6 answers
RELEVANCY SCORE 38.8

i am a student, i have to give a presntation in 3 days titled
"modren transport protocols and their applicibilty"

i have been searching for it and found a few things on wikipedia, which are not good enough, so can any one help me please
thanks
 

A:assignment help plz

You are not going to find what you need here. Do the research. The fact that you can't even spell it means you have a lot to do.
 

Read other 2 answers
RELEVANCY SCORE 38.8

Hi guys! I am trying to find out how to assign hot keys to a specific action. Currently, I am having to copy and paste the BB code for font and color to every post I make on forums. [color=red][font=arial]this is what I type[/color][/font]

I would like to assign one of my hot keys to copy and paste this code so I don't have to do it manually every time. Anyone know how to do this? thanks in advance!
 

A:Hot key assignment

You can use the buttons that are along the top in the editing mode to make those codes automatically. Or you can use something like the free version of PhraseExpress to type any phrases you like with key combos.
 

Read other 1 answers
RELEVANCY SCORE 38.8

well the assignment is to develop an abstract type for handling characters. Only handling 26 capital letters. I have this need help with CharSet.cc

//CharSet.h

class CharSet
{
private:
bool Contents [26];

public:
CharSet(); //constructor initializes set to be empty

void Add(char Value); //add character to set corresponding bool set to
true
void Remove(char Value); //Removes char corresponding set to true

void Union(CharSet ASet); //Union the set passed a parameter into set

void Intersect(CharSet ASet); //Intersects set passed a parameter
contains results of intersection
bool Member(char Value) const;
}//end class CharSet

Also have testSet.h which is my test

#include "Charset.h"
#include <iostream>
using namespace std;
void printSet(CharSet ASet)
{
for (char c = 'A' ; c <= 'Z' ; c++)
{
if (ASet.Member (c))
{
cout << c;
}; //end if
}; //end for
cout << endl;
}; //end printSet
int main()
{
CharSet Set1;
CharSet Set2;
CharSet Set3;

Set1.Add('A');
Set1.Add('B');
Set1.Add('C');
Set2.Add('B');
Set2.Add('C');
Set2.Add('D');
Set3.Add('A');
Set3.Add('B');
Set3.Add('C');

Set1.Intersect(Set2);
Set3.Union(Set2);
Set2.Remove('C');
cout << "Expect BC" << endl;
printSet(Set1);
cout << "Expect ABCD" << endl;
printSet(Set3);
cout << "Expect BD" << endl;
printSet(Set2);... Read more

Read other answers
RELEVANCY SCORE 38.8

I am currently studying C# and received a practice assignment for this:

Write a program for a teacher.The program should have an array that can hold the
test scores for 30 students.The program can randomly assign grades from 1 to 100 .
Determine the average score for the class.

This is what I came up with:

using System;
class Aprog{
public static void Main(){
int[] grade= new int[31];
int ctr;
System.Random rnd=new System.Random();
for(ctr=0;ctr<31;ctr++){
grade[ctr]=rnd.Next(0,101);
Console.WriteLine("Student{0}, Grade:{1}",ctr,grade[ctr]);
if(grade[ctr]>0 && grade[ctr]<50){
Console.WriteLine("F");
}
else if(grade[ctr]>50 && grade[ctr]<60){
Console.WriteLine("D");
}
else if(grade[ctr]>60 && grade[ctr]<70){
Console.WriteLine("C");
}
else if(grade[ctr]>70 && grade[ctr]<80){
Console.WriteLine("B");
}
else{
Console.WriteLine("A");
}
}
}
}

It works but some how it does not feel right or kind off sloppy. Does anyone know of a better way to create this application?
 

A:C# Assignment

Hi gfxrelay,

Never refrain from using methods to make the coding more readable :

Code:
[SIZE=2]using System;
class Aprog{
public static void Main(){
int[] grade= new int[31];
int ctr;
System.Random rnd=new System.Random();
for(ctr=0;ctr<31;ctr++){
grade[ctr]=rnd.Next(0,101);
Console.WriteLine("Student{0}, Grade:{1}",ctr,grade[ctr]);
Console.WriteLine(getLevel(grade[ctr]));
}
}

private static string getLevel(int grade) {
if (grade >= 80) return "A";
if (grade >= 70) return "B";
if (grade >= 60) return "C";
if (grade >= 50) return "D";
return "F";
}
}[/SIZE]

 

Read other 1 answers
RELEVANCY SCORE 38.8

I have W7 RC1 64 bit installed successfully on my new build. Its SLI and RAID. How come IRQ 16 has over a dozen assignments? From the graphics cards to the SATA/RAID controllers. Why is this IRQ so heavially loaded by windows?
TY

A:IRQ Assignment

  
Quote: Originally Posted by spyknee


I have W7 RC1 64 bit installed successfully on my new build. Its SLI and RAID. How come IRQ 16 has over a dozen assignments? From the graphics cards to the SATA/RAID controllers. Why is this IRQ so heavially loaded by windows?
TY



Could you tell us all about ypou coputer networking, raid contoller, etc

Ken

Read other 2 answers
RELEVANCY SCORE 38.4

my whole class is so stuck with this, can someone please do it, its quit basic for most of the programmers on here

***Note

*We use Kawa 5.0 to run our programs
*please use methods and call each method as its needed
* Please use JOptionPane for message boxes

Heres the assignment

http://usera.imagecave.com/killswitch/jjjjjjjj.gif

i would be so greatful ... thanks in advance
 

A:Java Assignment ... Please Help

Read other 6 answers
RELEVANCY SCORE 38.4

I'm having a problem with an assignment. I'm new to c++, so this shouldn't be too hard. Here's the instructions:

Revise the preceding assignment to distinguish resident and nonresident students. Input a residency status code followed by the number of hours enrolled. The status code is "R" for a resident, "Q" for the end-of-data-signal, and any other character for a non-resident. When a "Q" is entered, do not require the user to enter the number of hours enrolled. The letters may be either upper or lower case. The tuition rate is $52.00 per hour for residents and $110.00 per hour for nonresidents. Revise the final statistics to output (1) the average tuition paid, (2) the highest tuition paid, (3) the lowest tuition paid, and (4) the percentage of students who are residents. Use the format shown below.

My Problem: after typing in q, I still have to type in a number for "Hours" before hitting enter. Can anyone help me?

My code:
#include <iostream>
#include <iomanip>
#include <limits>
using namespace std;

//===========================================

int main()
{
const double RTUITION_RATE = 52, NTUITION_RATE = 110;
double Hours,Tuition, SCount,Highest,Lowest,AverageTuition,
PercentResidents,AllTuition,RCount;
char RCode;

SCount = 0;
RCount = 0;
AllTuition = 0;
Highest = 0;
Lowest = INT_MAX;
//===================================================================================

do
{

cout <&... Read more

A:C++ assignment problem

Read other 14 answers
RELEVANCY SCORE 38.4

Replaced Geforce2 MX (32MB) with Geforce2 Ultra (64MB DDR). Card is made by VisonTek. Manual advises IRQ 11 as preferable. BIOS set to automatically select. Card was assigned IRQ 10, not shared. IRQ 11 is Ethernet card. Question: Is assignment of IRQ 11 to video card important enough to reconfigure BIOS manually? Does it make a difference in performance, or is it fine as long as it is not sharing the IRQ? Also, in Control Panel, under System>Performance, System Resources is only around 75-80 percent. After restart, will go up to only about 86 percent. I would have thought that a new video card, with more (and more efficient) onboard memory would have used less resources, not more. Any ideas?
 

A:GeForce IRQ Assignment

Read other 7 answers
RELEVANCY SCORE 38.4

I 've got a problem with macro assignments in vb6.
I 'd like to write the varible name to text1.box and assign the value of the same variable to text2.text , next to it on the form.
This way, I could debug the change of variables at the run time. But how ? Any help is appreciated.

 

Read other answers
RELEVANCY SCORE 38.4

Hi All,
I am new in this forest and wish well to all. Im looking for a person who can guide me through to make DVI or VGA to Mac Adapter DB15/HDDB15 converter. Attached is the snap of Mac Adapter. I would be grateful for your kind help.
Thanks,
 

A:Need pin assignment for Mac Adapter

Looking for this?
http://www.si87.com/www_store/merch...re_Code=1&Product_Code=7031&Category_Code=ADP

or are you actually after the pin out
http://margo.student.utwente.nl/el/componen/fpinout1.html#PINOUTS_009
 

Read other 1 answers
RELEVANCY SCORE 38.4

hey everyone!

I need help working out a few more bugs in this code for my most recent assignment. this program's purpose is to input an integer and return it reversed.

the code i got so far is:

import java.util.Scanner; // Imports the java utility so we can use the Scanner class to receive input.
public class ReverseStringProject
{
/**
* Get string, run reverse method, output reversed string
* @param args
*/
public static void main(String[] args)
{
Scanner in = new Scanner(System.in); // Declares the new Scanner which looks for input (System.in)
String theString = new String(); // Creates a blank String, which the user's input will go into.

System.out.println("Enter a string: "); // Prompts user for input
theString = in.nextLine(); // Sets the user's input (in.nextLine()) to the string theString.

theString = reverseString(theString); // Function to be made that will reverse the string given.
System.out.println("The reversed string is: "+theString);

}

/**
* Will take any given string, and return the reversed of the string.
* @param theString The string variable sent to it to reverse
* @return the reversed string
*/
public static String reverseString(String theString)
{
//CODE START
String charString = new String();
int stringLength = 0; //variable to store length of the string
int stringLength1 = theString.length();

for(int i = stringLength-1; i >= 0; i--)
{
charString += theString.charAt(i);
}
//CODE END
return charString;
}
}
... Read more

A:more n00b assignment help

Read other 9 answers
RELEVANCY SCORE 38.4

Hello. Does anyone know how to force Windows XP to assign a USB device to a different/specific COM port? Thanks.
 

Read other answers
RELEVANCY SCORE 38.4

I 've got a problem with macro assignments in vb6.
I 'd like to write the varible name to text1.box and assign the value of the same variable to text2.text , next to it on the form.
This way, I could debug the change of variables at the run time. But how ? Any help is appreciated.
 

Read other answers
RELEVANCY SCORE 38.4

I click on a google bookmark and it sends me to the Yahoo home page and not the bookmarked page. Don't understand why, it just started doing it. Can anyone help me out so my bookmarks work??? Thanks in advance.
 

A:Bookmark assignment

Sounds like you may have downloaded something that messed with your search preferences. Try making Google your default search engine.

You might also remove the Yahoo toolbar if it is installed. Disable the Yahoo add-in in your browser
 

Read other 3 answers
RELEVANCY SCORE 38.4

I'd like for you give me an adobe photoshop assignment. Can you make it as simple as possible? I just want to learn how to use it.

Spent $620 at the USM bookstore and I don't know how to use it and I can't find a buyer. Might as well try to make it work.
 

A:gimme an assignment

Well....just a thought, but, you're nearing your 100th post, so why don't you try working on a custom avatar for yourself when you get to "senior member" status?

Like I said....just a thought! You may also want to hit random with this...those guys are great for coming up with "assignments"!

TT
 

Read other 2 answers
RELEVANCY SCORE 38.4

New clients on my network always try to assign themselves a new IP instead of using 192.168.0.1 as their internet gateway. There is one client that functions correctly on the network and DHCP is enabled on it. I've tried manually setting the other clients as well as using DHCP and no dice. My home network was find once upon a time and poof, just stopped working one day. Thanks in advance for any help provided.
 

A:ICS IP assignment issues

Read other 11 answers
RELEVANCY SCORE 38.4

I really have to finish my computer assignment and I am confused at few questions.

1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.

2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits.

3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all).

The last questions I believe uses the concept of

1) Fetch
2) Decode
3) Execute
4) Store.

A:Assignment help on Binary

Asking us todo your homework eh? Review your textbooks on the subject matter.

Read other 1 answers
RELEVANCY SCORE 38.4

I have not been able to find which port is assigned to which device in window7.in the device manager there is no reference to show to which port a device is assigned.could any one help me to be able to find a port assigned to a particular device.Thanks.

A:port assignment

Hi arif1, hope this helps. How to get a list of all open ports on Windows 7, Vista and XP? ? FAQforge

Read other 3 answers
RELEVANCY SCORE 38.4

Given an IP address range, select the correct subnet mask for the scenario. IP address: 200.4.82.0/24 You need to create 6 networks with a minimum of 28 hosts per network. What is the correct subnet mask and the 3rd subnet range?

This is the answer I came up with. I just need to know if I'm on the right track...

225.225.225.0 - 255.255.255.224
200.4.82.64 - 200.4.82.95

Thank you in advance,
Denise
 

A:Help with subnetting assignment.

Welcome

You are correct with the subnet mask. The netmask of 255.255.255.224 will give you 30 hosts minus 2 for network and broadcasting address. So your networks would be 200.4.82.0, 200.4.82.32, and 200.4.82.64.

How did you come up with the subnet mask?
 

Read other 3 answers
RELEVANCY SCORE 38.4

Is it possible for me to use my OEM copy of windows on my second hdd for a day to install my copy of windows for a class assignment?? I dont want to have to uninstall my copy of windows on this system I built for class to reinstall it in front of the instructor, I spent hours tweaking it. So i was wondering if I could just take my win 7 disk and my second hdd to class, install windows on that for the class and then uninstall it when I get done with the class?? Please help, it would be greatly appreciated.

A:using second hdd for class assignment....

I'm not sure if your plan would work. You have an OEM disk and they activate a bit differently than a retail disk. Maybe activation can be ignored temporarily as with a retail disk.

But you can certainly download an ISO of Win 7 from mydigitallife.info, burn it to a disc, install from it, and run it for 30 days without activation.

Read other 4 answers
RELEVANCY SCORE 38.4

I am a student studying MCITP in school, i really needed your help and my tutor/teacher gave this assignment:

3 Servers, 6 Switches and 200 Client Computers.

Question: "Plan how to set this up"
Thank you in advance
 

A:Urgent assignment

That description is a little vague.

We don't assist with doing peoples homework for them either.
 

Read other 2 answers
RELEVANCY SCORE 38.4

Any one assist me with this please:
ATZ Publishing Company occupies three buildings - buildings A, B, and C. Building A has one room containing 16 computers and one printer. Building B has two rooms one containing 8 computers, the other containing 9 computers and one printer. Building C has three rooms two rooms containing 10 computers and one printer each and the other room contains 4 computers. The distances between the buildings are shown in the diagram (please see diagram). The owner of the company is keen to improve the efficiency of the business and is considering installing a client/server Local Area Network (LAN) based on Windows NT 4. All users need access to two centralised file and printer servers. The LAN infrastructure should be based on Ethernet technology and all design consideration should include 50% growth. The management is concerned about security and would like a networking solution that is fast, scaleable, reliable, and offers easy troubleshooting.
 

A:Networking Assignment

What have you come up with so far? Your ideas? Thoughts? Do you not understand how something would work? etc?

We decided here awhile ago that we don't just do other people's homework without you first giving it a go and you didn't give any indication that you've tried. You don't learn anything that way and it's cheating. Give us what you've come up with so far and we can answer any questions/probs you have along the way.
 

Read other 1 answers
RELEVANCY SCORE 38

The original drive in my PC has 3 partitions, C: , D: , and E:. I have just added a second drive to my PC with only 1 partition. The problem is that my computer has assigned drive letter "D:" to the second drive and has reassigned my original drive partitions to C: , E: , and F:. This problem has messed up some shortcuts to say the least. How can I get my computer to assign drive letter "F:" to my second drive. I am not able to change fixed drive letter assignments in the device manager.

System specs:
win98se
AMD Athlon
Soyo SY-K7V Dragon motherboard
Original drive: Western Digital WD307AA
2nd drive: Seagate ST340810A
Both drives are on IDE1
IDE's: IDE1, IDE2, IDE3, IDE4
Thanks
 

A:drive letter assignment

Hi export5, welcome to TSG....

If I'm not mistaken, I think that is the way windows will treat a second hard drive if the first is partitioned......

You might take a look here to understand how drive letters are assigned:

http://www.microsoft.com/mspress/troubleshooting/Solutions/89.asp
 

Read other 3 answers
RELEVANCY SCORE 38

So I bought a new keyboard but it is the same, the solution that I found for the l, 'T is another plug in to usb by usb!
Not very convenient for a laptop ..

Tell me where it comes from and if there is a solution. Thank you

Read other answers
RELEVANCY SCORE 38

i have 3 t410 laptops one with no screen and the power button went bad on the keyboard that is currently on it. i had gotten it to boot up a time or 2 by touching the 2 end contacts-one on each side- together but now there is no response from that. my plan for this pc is to sit on a docking station connected to a 50" flat screen to use netflix and the kodi app. will be running mint on a ssd so basically i want to use it as a firestick with 8gb of ram. i have wireless key boards, ect. so my plan was to just solder a wire to each pin and just touch them together to boot up as this will stay on 24/7. eventually i will replace the keyboard when i find another deal on ebay for another t410 for parts. i have not been able to find anything designating which pins connect to what. any help will be much appreciated!

Read other answers
RELEVANCY SCORE 38

I am trying to write a program that calculates income tax based on income. I cannot get any output from it, nor does it ask for any input (income). I do not get any errors-build is successful, what am I doing wrong?


import java.util.Scanner;

public class IncomeTaxCalcualtor {

public static void main(String[] args) {

}

public double computeIncomeTax() {

Scanner in = new Scanner(System.in);
double tax=0.0;
double income;
System.out.print("Please enter taxable income:");
income = in.nextDouble();

if (income < 50000) {
if (income < 50000) {
tax = tax + (income * .01);
} else if (income>50000) {
return tax + ((income - 50000) * .02);
} else if (income>75000) {
return tax + ((income - 75000) * .03);
} else if (income>100000) {
return tax + ((income - 75000) * .04);
} else if (income>250000) {
return tax + ((income - 100000) * .05);
} else if (income>50000) {
return tax + ((income - 500000) * .06);
}

System.out.print("Your tax liability is :" +tax);

}
return tax;
}

}
 

A:Income Tax Calculator Assignment

What happens when you import java.* instead of just scanner?
 

Read other 3 answers
RELEVANCY SCORE 38

Hello all. I am a (nearly) straight 'A' university student, who despite having followed my curriculum exactly as intended and meeting all prerequisites, have found myself forced into a class with fairly moderate C++, without the school having yet given me any proper C++ training.. (I only know the basics currently, from my own experience.)

I currently have a very frustrating assignment, for which there is virtually no help for in any of my course materials, and the instructor does not even seem to know what he is talking about and gives me annoyingly vague, confusing answers whenever I email him questions (and now he doesn't even respond at all !)..

Please, I could really use some help as I am stuck and need to have this assignment done by Sunday, 11:59 MST, though I may be able to get it extended if necessary (but am not sure that would be allowed)..
I have ATTACHED the ASSIGNMENT INSTRUCTIONS (" Data Structures and Artificial Intelligience with Lab FALA07 - Sec B.pdf "), as well as the current state of MY CODE (" main.cpp ") in the .zip file. If for some reason the attachment doesn't work, I have also uploaded it to the following URL:

http://www.megaupload.com/?d=GG5YBANP

This is a Win32 console project done in Microsoft Visual Studio, as I am sure you would see from my assignment instructions.
Basically, I am stuck on the the Union and Intersection portions, as my course materials have no reference for how to do this whatsoe... Read more

A:NEED HELP FAST for unfair C++ assignment

Your problem is not stricking to your specs:

// insert a new value only if it is unique (not already in the set)
void Insert(int newValue) {

Your Insert function does not check whether the new value is unique. If it did, your Union function would probably work. Furthermore, you simply rewrote InsertFront! You might as well just call InsertFront from within Insert.

In fact, I think that's what they expect you to do - FIRST call search to check if the value is already there or not, and if not, use InsertFront to add it.

Personally, I would store the list in numerical order as this is significantly faster; however the above method will work without errors, and as I said, is probably what they expect you to do.

Intersection is a simple matter of adding everything in the first set that's a member of the second set.

Good luck!
 

Read other 3 answers
RELEVANCY SCORE 38

Troubleshooting a corrupted drive, so installed it on a working PC as a slave. Got it working long enough to pull the data. Drive letter assigned was "M". Shutdown, removed drive, boot. Drive letter was STILL showing up.
-Tried Disk Management in WXP, no luck.
-Tried command line removal, no luck.
-Used TweakUI to remove the drive from the list, which is great, but I still cannot assign "M" to any other device. I can live with it, but I'm curious if anyone has a solution.
 

A:Drive Letter Assignment

[tsg=welcome][/tsg]

Hi There!

The only guarentee of resolving you delemma would be to format and Reinstall Windows. That can be alot of work, but if you're having system issues and such, wiping the drive and reinstalling windows should resolve most id not all of the problems.
Good Luck!

ST
 

Read other 1 answers
RELEVANCY SCORE 38

Sir,
Can we assign two ip addresses over a same win-98 PC
can we use both ip addresses simultanelously ?
 

Read other answers
RELEVANCY SCORE 38

I've got an issue that I wouldn't think is as unique as it seems to be, due to my lack of being able to find information on it.

When I am at home, I have access to the control of my router (Linksys WRT54G) which I use the wifi on to connect my laptop to the internet. When I am not at home, I often do not have access to the router at which I am connecting, and I do use my laptop away from home quite frequently (work, friends' houses, etc).

The question I am looking to find is a way to automatically have my computer set up for DMZ while at home, either as a setting through the router, as a script to be run on my computer, or as a setting in windows. However, the difficult part is that when I am connected to any network other than my home network, I would like to revent to a Dynamic IP address assigned by the DHCP server in the router.

Having the router automatically assign a specific IP to my MAC address would seem to be the easiest way, but I'm not sure if mine can do that or not.

Other pertinent information:

Current system - Windows XP Professional x64 Edition (multiboot to Vista Beta 2 x64, possibly back to XP Pro 32-bit if I continue having issues with x64, mostly application compatibility)
Wifi card - Broadcom b/g WLAN card

Any suggestions would be greatly appreiated. Thanks!
 

A:Dynamic/Static IP assignment?

Read other 7 answers
RELEVANCY SCORE 38

Hi folks,

Trying to sort out a weird one here. Have a new motherboard in an old pc, with a clean os re-install on a new hdd (effectively a brand new pc), that for some unknown reason is picking up a foreign ip address for the integrated ethernet port every time the system boots.

The network connection is set to auto assignment via dhcp, the dhcp server is working just fine, as is everything else on the lan. If one "repairs" the connection, it picks up a correct ip address from dhcp and works fine. If one just leaves it alone, it eventually will get the right information and start working - but up to 20 minutes after the pc has been booted. Every boot, I am getting errors that network shares can't be mounted, and update servers can't be found etc. etc. It's just a complete pain to have to repair the connection, and re-establish all the network related linkages every time.

The address being chosen is always 169.254.91.143 with netmask 255.255.0.0 This address, and even the ip range it's in, has never existed on the local lan, even if there were some way for it to have been copied from somewhere.

I've not been able to find any reference to that ip address anywhere on the system, other than ipconfig when the system is faltering.

Any clues more than welcome....

Configuration is: MSI K9N6PGM2 motherboard (using integrated lan port, and XP drivers from MSI), AMD Phenom Quad core 9550+ processor, Win XP Home SP2 os
 

A:Weird IP assignment issue...

That is the default Automatic IP address that Windows assigns to an adapter that is not getting an IP address from the DHCP server. Try updating the drivers for the adapter.
 

Read other 2 answers
RELEVANCY SCORE 38

i need to get dos support for my pcmcia cdrom on a toshiba laptop running win2k, and cant seem to figure it out...any ideas???

thanks

[Edited by CleoOrlando on 05-25-2001 at 12:23 AM]
 

A:drive letter assignment

Read other 8 answers
RELEVANCY SCORE 38

Ok. I just partitioned my hard drive to install a second OS on it. In doing so it asked me if i wanted to assign my partitions letters because it resized my primary partition and created another one. Being the dumbass i am i mistakenly clicked no. So my primary hard partition won't boot Windows xp pro cause it's not assigned the Drive letter C. How can i assign this a drive letter without deleting my data on the hard drive? thanx....
 

A:Drive Letter Assignment!!!! Please Help....

Read other 16 answers
RELEVANCY SCORE 38

In the Microsft Network Devices of XP each workgroup found on the LAN is assigned a icon. These are used to connect to the workgoup. Somehow the browser that is being assigned to access the workgroup has been designatated as a drawing application on my system call Printshop Pro.

It should be Explorer a file manager, or at least I believe so.

How do I go about changing this browser assignment. Right clicking on the icon offers no way to change it or am I mistaken?

thank you
 

A:Brower assignment is wrong

Hiya and welcome

I've moved this to Windows XP forum for more response

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 38

Hi All,

It's my first post here so go easy on me!

I've a fair knowledge of all things windows, but this one has me stumped.

If i hold "space" and tap "AltGr", then "MySQL Query Browser" launches. It's as if i assigned a shortcut to it.

However - i didn't ever assign this shortcut, and to the best of my knowledge, you can't have the space bar as the first part (hold down) of a shortcut anyway.

More Info:
Space + AltGr = MySQL Query Browser
AltGr + Space = Nothing

Ctrl + Alt + Space = Nothing
Ctrl + Space + Alt = MySQL Query Browser

Alt + Ctrl + Space = Nothing
Alt + Space + Ctrl = MySQL Query Browser

Space + Ctrl + Alt = MySQL Query Browser
Space + Alt + Ctrl = MySQL Query Browser

​Any ideas how i can unassign this? It's not a hindrance as the Mysql windows are easily closed, but it is annoying that i can't figure out why it's happening or how to stop it.

OS is 7x64.

Thanks for reading,
Jon
 

Read other answers
RELEVANCY SCORE 38

Working with a mainboard (BEK-5731) to build a PC, and having trouble with video card. (Have tried several video cards in PCI Slot 1, but they either do not work at all, present garbled info, or the monitor screen freezes up after a while forcing a reset to get things going again.)

When PC boots, under PCI Device Listing, Device Class: Display Controller shows IRQ=NA.

Under System Tools>System Info>Hardware Resources>IRQs, IRQ 11 was assigned to:IRQ Holder for PCI Steering, AND, Intel 82371SB PCI to USB Universal Host Controller. Not interested in USB, so, disabled this option in the BIOS. Now, the info that shows up is that IRQ 11 is Free!!

Appreciate some assistance on how to assign IRQ 11 to the Video card.

 

A:IRQ Assignment for a Video Card

Read other 8 answers
RELEVANCY SCORE 38

Hey everyone! Here's what the situation is:
 
I have a brand new hard drive. I set up a Dell Utility partition using the disk from Dell. Once that was done, I installed Windows XP Home on the unallocated partition. Everything set up just fine, but now the hard drive doesn't have the letter assignment I want. If you do the DISKPART command, the partition with Windows on it shows as C. When you boot your system and actually use Windows though, the hard drive shows up as I. Why don't they match? I want my drive to be C. What do I need to do to change it to C? I know I can't use the disk management tool because of the whole system volume thing.
 
Would I need to use the Windows Repair or the full installation? I have not added any programs to the computer because I wanted to get this issue resolved first. I saw instructions on Microsoft for "How to restore the system/boot drive letter in Windows". It says you shouldn't use it unless the drive somehow changed names on its own. I don't know if it's safe to follow or not. The instructions were at: http://support.microsoft.com/?kbid=223188
 
Please help. I want to be able to get my desktop up and running again. Thanks in advance.

 

A:Drive letter assignment

Go to Disk Management...post a screenshot reflecting all hard drives/partitions, please.
 
How To Capture And Edit A Screen Shot. - http://www.bleepingcomputer.com/forums/topic43088.html
 
Louis

Read other 9 answers
RELEVANCY SCORE 38

Hi!
 
I have an assignment I have to finish until the end of this month and I wanted to ask around for some help in the form of feedback and suggestions. I have to do a suite of apps that belong together and share a common theme and setting.
 
I did a few utility apps for both Windows 8 and Windows Phone (7 and upwards). Could you maybe have a look at them and tell me if you have the feeling whether they belong together? If you have any suggestions on how I could improve them please feel free to share them with me. Here are the apps I did so far:
 
Windows 8:
 
Modern Stopwatch (Link)
Modern Timer (Link)
Modern Converter (Link)
 
Windows Phone:
 
Modern Stopwatch (Link)
Modern Timer (Link)
Modern Converter (Link)
 
If you could provide me with any feedback it would be great! The apps are of course free and have no ads in them, so I don’t get any money from them! All I want is that I deliver a good suite =)
 
Thanks very much!

Read other answers