Over 1 million tech questions and answers.

[SOLVED] Belkin N usb adapter problems

Q: [SOLVED] Belkin N usb adapter problems

Hello everybody, I have a Compaq Presario SR1910NX running windows 7 with 3.5 gb ram and a AMD sempron 1.8 Ghz processor.

When I plug in my Belkin n usb adapter, I don't hear the regular device plug in sound but instead its like a similar sound that plays 3 times consecutively. When I remove the adapter, I do hear the sound that a computer does after a device has been removed. I do know that the adapter needs a driver, but midway through the installation of the driver and wireless utily it says plug in your usb adapter and when I do nothing happens, its as if the device is not recognized by the desktop.

I have another computer with windows xp and the usb adapter does work on there with no problem. I was thinking it was either a os problem or just the desktop. Any suggestions? Any help would be appreciated, thx.

RELEVANCY SCORE 200
Preferred Solution: [SOLVED] Belkin N usb adapter problems

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: [SOLVED] Belkin N usb adapter problems

Ok I have a Wireless adapter. First: Did it come with an installation CD? I felt so stupid trying to install it for 10 minutes and realized I wasn't using the CD.

Read other 17 answers
RELEVANCY SCORE 73.2

I recently moved into my new place, with no convenient place to put my computer using a wire to my router. (Orange live box)
So I decided to buy a "Belkin: N Wireless USB Network Adapter"
I can't seem to get it to connect.

Anyone got any advice on how to connect this device, i'm not sure wether or not it is my router or belkin that is being a pain in the bum.
 

A:Solved: Belkin: N Wireless USB Network Adapter connection problems

Read other 14 answers
RELEVANCY SCORE 65.2

Hello all, I am desperate for a solution. I purchased a new Abbra 2 alarm system with an Linkys ABN adapter. I have a Belkin Pre N router which works perfectly until I plug in the adapter. I have 4 wireless laptops that connect to the router.

All the PC's connect and work fine until I plug in the ABN adapter. THe ABN adapter gets it's DHCP address and for about 60 seconds all our connected. THen the wireless computers drop the connection. I have tried to talk to Belkin, Next Alarm and have not been able to find a solution. Any suggestions.. Thanks
 

A:Problems with ABN adapter and Belkin Pre N Router

I can't imagine the ABN adapter doing this, it's just another Ethernet device.

Just on a lark, can you take that adapter to a friends network and see if just plugging it in creates the same issue on a different network?
 

Read other 3 answers
RELEVANCY SCORE 65.2

Hey sevenforums im new here =].

Anyways i just got my windows 7 ultimate working and everything is working fine expect my network adapter. I installed the vista drivers found on the belkin website. Which did the trick and made it work. But i noticed every 2 hours or so the adapter would disconnect from my internet while everyone else in the house who are on xp/vista works percfectly.

Now im not sure if this is because my network adapter isn't compatilbe with windows 7 or something else.

Oh and im using Belkin Wire G+ Mimo ver 3001

Can anyone help me out, and also is anyone else getting this problem

If there is nothing i can do what network adapter would you guys recommend which works with windows 7 and i can get in the uk :P?

A:Belkin G+ Network adapter problems

  
Quote: Originally Posted by Badmax


Hey sevenforums im new here =].

Anyways i just got my windows 7 ultimate working and everything is working fine expect my network adapter. I installed the vista drivers found on the belkin website. Which did the trick and made it work. But i noticed every 2 hours or so the adapter would disconnect from my internet while everyone else in the house who are on xp/vista works percfectly.

Now im not sure if this is because my network adapter isn't compatilbe with windows 7 or something else.

Oh and im using Belkin Wire G+ Mimo ver 3001

Can anyone help me out, and also is anyone else getting this problem

If there is nothing i can do what network adapter would you guys recommend which works with windows 7 and i can get in the uk :P?


What version of win 7 are you running? (7000,7100,7600)

Read other 4 answers
RELEVANCY SCORE 65.2

Hi. I recently installed Windows Vista home premium x64 on my Athlon 64 system and
plugged in my Belkin F5D7050 wireless G usb adapter, only to find out that,
of course the drivers didn't work. Went online, using my laptop, downloaded the latest and greatest drivers and I installed the driver and the device still doesn't work.
For instance, when I set it to search for wireless networks nearby (which it
should find mine), the activity light on it doesn't even flash once. It
hasn't flashed ever since I plugged it in after installing Vista. So my
question is, is there a driver that would work with my adapter, and if there
isn't could you recommend a low cost wireless usb adapter that would work
with Vista home premium x64? Thank you for your help, sword182.

Read other answers
RELEVANCY SCORE 65.2

Ok i installed windows 7 few days back the RC and i tried to install the Belkin USB Wireless adapter drive, now its installed and i restarted my computer now after restart and login it will connect to the internet for like 2-5mins and then disconnect when i try fix it totally looses connection and there no way getting it back unless i restart it again.

I find it strange how it works for few mins and just doesn't work at all and tottaly loses connection, anyone have any ideas why it isn't working?

Thank you,
Regards,
Mark

A:Belkin USB Wireless Adapter Problems...

ibanksy

Try dis-abling IPv6 support in sharing and network>adapter>pick adapter>dbl click>properites>uncheck ipv6

let us know how it turns out

ken

Read other 9 answers
RELEVANCY SCORE 65.2

I have purchased a Belkin Surf&Share wireless usb adapter. It worked for awhile but all of a sudden it wont let me connect to the wireless internet. I am using the adapter on my desktop that has windows XP and connecting to a neighbors internet. when i open the connection it either says it has security or when i click connect it just says "identifying network type" for hours and hours. i know that the connection is not security enabled because i am using it on my lap top right now to type this. please help me.
 

A:Belkin wirelss adapter problems

If still under warranty, or a purchase agreement, return it for a replacement...
Otherwise, you will be fixing it over and over until you trash it...
Alternately, you should try a quick fix, but totally removing the Belkin Software, using a registry editor if necessary to get all of the old install removed.
Then reboot, and reinstall.
Some folks on TechSpot love Belkin... But we find theire are sometimes differences from model to model, and from which part of which country they are purchased.
Belkin does not manufacture these units, as I understand their system, but has them built and packaged under contract. And the ones we get in for repair vary a lot.
If you can trade it for another brand, from where you purchased it, you might be able to expect better luck.
 

Read other 2 answers
RELEVANCY SCORE 65.2

Before I begin, here are my specs using the TSG SysInfo:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 32621 Mb
Graphics Card: Intel(R) HD Graphics 4600, -1984 Mb
Hard Drives: C: Total - 912078 MB, Free - 684616 MB;
Motherboard: Acer, Veriton M4630G
Antivirus: None (Not Yet)
I'm having this problem that my games are always laggy (as in networking wise.) I just got a new computer and I realized that the computer does not come with a built in wireless card for networking, so I continued to buy a Belkin N750 DB/N900 DB Dual-Band Wifi USB adapter. When I followed the installation instructions for the driver software for the device, I restarted my computer to finalize the installation. After that, I checked my down speed via Network and Sharing Center in control panel, and i'm getting about 130 mbps. For example, I downloaded a game called Counter Strike: Global Offensive to bench mark my computer. I'm getting a good frame rate, but every game I join, I have over 500 ping, and making the game unplayable. This really bothers me, because in the same room, another computer capable or running CSGO at about the same frame rate has on average less than 10 ping. The only difference is that it's using a built in card and is about 1 foot from the router (my computer is less than 7 fee... Read more

Read other answers
RELEVANCY SCORE 65.2

Hello everyone,
I have just built a new PC as of last night and I am having problems connecting to the internet. I bought a Belkin N150 F9L1001 USB adapter for the computer so I could access the internet but, sadly, it is not working for me. The problem is that every couple of minutes while I am connected, it will show my network as not having any internet access. When this shows, I troubleshoot the program and windows shows that it had reset the network adapter (because "the default gateway is not available) and then I'm connected to the internet again. I've been all over the forums here and have tried to fix the problem to the best of my abilities. I have even tried using the adapter in a different computer, which worked, so I know we can rule that out. Anyways, any help provided would be much appreciated. Thank you!
 

A:Problems with a Belkin Wireless USB Adapter

Read other 8 answers
RELEVANCY SCORE 65.2

Bought this adapter a few hours ago, and after attempting to install it, have decided to console trusty techspot for advice. Basically, I followed the "Easy 2-Step Guide" that Belkin provide, to its entirety, and the result was that when I opened up the Belkin wireless utility it couldn't find a signal, or even a network.

So, first thing's first: move closer to the router. So I did...to about 1.5m away, and still nothing. Hmm. Then, after much playing around with useless settings in the utility I decided to call Belkin support. The guy spent 20 minutes getting me to do this and that, and ended up saying that I had to change a channel or something on my BT router. Does anyone know if this could be the answer to getting connected to the network, and if so, how do I change the channel thingy?

As always, any help/advice would be greatly appreciated!
CJB
 

A:Belkin G USB Wireless Adapter Problems

some obvious things to check first;

is the router configured to ALLOW wireless (it can be off)
did you check your pc device mgr to see if the device is enabled

 

Read other 4 answers
RELEVANCY SCORE 64.4

Firstly Hello

Right, to the point, i run a Belking wireless G gaming adapter through which i use my xbox 360. My NAT type is moderate and i don't know how to change it!

I have changed all the settings on the router itself, following advise from forums etc. and i know that all works, as i have connected my xbox to my laptop via network sharing and that all works. So i know its a problem with the adapter. I really dont know what to do, ive searched the internet forums and no one seems to have the same problem. Has anyone got any ideas?
 

A:Problems with Belkin Wireless G Gaming adapter

If it is like my wireless D-Link gaming adapter, you connect it to the PC via the LAN port and access the software built into the gaming adapter by typing its IP address into the browser address box. Once you access it, you can make any changes. You will need instructions as to what IP address to use. Go to Belkin's website for specific info.

I'm actually using my adapter not for a gaming console but for a PC.
 

Read other 1 answers
RELEVANCY SCORE 64.4

I am having trouble with the installation of a Belkin network adapter on my PC. I run Windows XP home edition. I have a dynalink ADSL modem installed. Everytime I install the Belkin network adapter my system crashes and shuts down. If I uninstall it everything works fine again. I am following the instrcutions in the manual. I get a blue screen saying windows needs to shut down to prevent damage to my computer. The error message is
Driver-IRQ not LESS or EQUAL.
Am I right in assuming it is a IRQ conflict and if so how do I go about rectifying this as when I install the network adapter my system crashes so I cannot go into anything to change any settings. Thanks in advance.
 

A:Belkin network adapter installation problems

Read other 6 answers
RELEVANCY SCORE 64.4

Hi, we have a network in our house running off a Belkin router. We have one computer currently connected to it using a Netgear WG111V2 adapter.
The problem that i am having with it is that it is very erratic. It always seems to have full signal but it will just disconnect for no reason sometimes, this can be solved by repairing (sometimes, othertimes it requires a reboot) it but is still very irritating.
Sometimes it will be connected to the router but wont let you on the internet even though the internet light is displayed on the router.
I dont know if it is a problem of the adapter as i used to use it on a laptop in another room even further away from the router so distance isnt a problem either! When i did use it on the laptop however i had no problems with it, the connection was solid and it never disconnected.
The main annoyance i play an online game and it will be fine for a few minutes then say 'Connection Problems' for about 5 seconds then be fine again. Sometimes it can do this regularly othertimes rarely. The fact that it says connection problems suggests that the internet has disconnected, as this is what it does when the internet completely turns off, which it does quite often while im playing.

I really am at a loose end with it, its driving me mad!
Any help would be greatly appreciated

Simon
 

A:Belkin router/ Netgear Adapter Problems.

I hyave a wg111T wireless adapter and it does the same thing. I called ntgear sevral time and finally i changed the IP settings from dhcp to static and 192.168.1.25 subnet 255.255.255.0 and a local DNS to 4.2.2.2 and sec. 4.2.2.1 . never lost the connection since. Try that and c if it solves your problem. if it does look for a local dns server you could point to. (this is for the pacafic North west)
 

Read other 1 answers
RELEVANCY SCORE 63.6

i have been trying to uninstall the program belkin wireless g usb network adapter from my system. the add/remove will not do it nor will the cd that came with the product. i am running with ms windows 2000 pro. this is the adapter that plugs into the usb port. belkin part # fsd7050 version 2000. any & all all help would be appreciated!
 

Read other answers
RELEVANCY SCORE 63.6

Hi guys I am Andrew and I recently installed the Beta Release of Windows 7 well the issue I am having is that when ever I run the CD it says that it is not compatible, well I am using an F5D7050 adapter and a 1444 router. So is there anyway to bypass it to make it think it is Vista? It is compatible with Vista, Xp, and previous versions. Also after upgrading is there a way to downgrade back to XP which is what I am running, Windows XP Pro SP3.

Thanks!
Andrew.

A:Belkin Wireless G USB Network Adapter Driver Problems

Hi, IFailed, and welcome to the forums.

Yes, see Compatibility Mode

Read other 9 answers
RELEVANCY SCORE 60.8

Hello.

I'm having difficulties finding adapters for my 2 x 5V 2A Belkin routers.
I know the Sony PSP adapters fit so I ordered 2 from ebay but they have been wrongly described and are actually 5V 500mA.
They power up the routers but are they OK to use long term?

Best regards,
SNB
 

A:Solved: Belkin Router Power Adapter

Welcome to TSG!!

I'd continue looking for the proper output power supplies. The 500mA may work for a while, but they may be being overstressed and will likely burn out prematurely.
 

Read other 2 answers
RELEVANCY SCORE 60.8

Hi, I just bought a new Belkin N750 USB wireless adapter today to replace my old cisco USB adapter well I install the drivers and software that came with it and everything loaded correctly and showed that there was connections available. I connected to one of the available connections and it connected but it says identifying the network well after a bit it says unidentified network and won't connect to the internet. Where I live we don't have access to the routers as the are controlled by the rental agency and I can't get access to them or the rental agency won't help out also. But anyways I can connect to the networks with my old usb adapter but not with the new one. My computer is Windows 7 64 bit and if anyone needs anymore information just let me know. So if anyone can help it would be great. Thanks.
 

A:Solved: Belkin N750 DB wireless USB adapter

Read other 7 answers
RELEVANCY SCORE 60.4

I had to reinstall my windows and am now at the part where I install the drivers for my Belkin G USB wireless adapter.

During the installation, it gets to the part saying "please plug in your Belkin wireless card now" .....it then stops the installation.

I don't know if it can't read that the wireless adapter or what. All I know is that i can not connect to the internt and when i try to install software for the Belkin router, it then says it can not because it is not detecting an intenet signal.

I have tried to uninstall and reinstalled the software that came with the Belkin G USB wireless adapter, but the problem is not going away.

Any help would be appreciated,

Silvercatii
 

A:Solved: Belkin wireless adapter not installing properly

Read other 9 answers
RELEVANCY SCORE 60.4

Hello,
I recently had a problem with my signal strenght and my Belkin wireless adapter not working properly. I have fixed them it seems, however in my zeal to remove the old wireless adapter completely I think I accidentally messed with a .dll file I wasn't supposed to. Now I recieve this message every time I start my comp:

Title:
Query My ca Information: InfoMyCa.exe - Ordinal Not Found LIBEAY32.dll.
Body:
The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll.

So I tried to download LIBEAY32.dll from a website, but I have no idea where to put it, and furthermore when I attempt to save it to the Belkin file it says that LIBEAY32.dll already exsists in that folder. So I'm totally lost as to what I need to do from here. I suspect it may be some sort of virus as I've erroneously downloaded or some sort of spyware, however it is just suspicion. PLEASE HELP ME I'M CLUELESS! THANKS!
sincerely,
sam p.
 

A:Solved: LIBEAY32.dll most likely related to a belkin wireless adapter

Read other 16 answers
RELEVANCY SCORE 60.4

Hi

I have a Belkin Play N600 (model No F7D4101).

It can detect access points, but for some reason wont connect to them.
When I first had it, it connected fine without a problem. As far as I can remember I have not made any hardware changes or major software changes.

I was using Vista and decided an upgrade to windows 7 with a fresh install might be all it would take to fix. Nope.

When I use it in my laptop, it connects fine first time every time.

I have tried a second Wifi adapter which worked fine, but its not mine to use so isn't a solution.

Tried the drivers on the cd, and downloaded the latest drivers.

My router is a bt home hub 3.0
 

A:Solved: Belkin WiFi adapter working, but not on the computer I want it to.

can we see a device manager screen shot - ipconfig /all and an xirrus screen shot with the device connected

what PC is it used on ?

moved to networking forum
------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

windows key and pause Key should open to allow device manager to be seen on laptops may need to use windows key + FN key + Pause Key
if not then

Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_S... Read more

Read other 3 answers
RELEVANCY SCORE 59.6

Greetings 2 All...

I have an issue w/my wireless A.P....it just died for no reason and it won't accept the driver download from the install disc it came with. Also when I try the website, it gives me a totally different driver(Realtek RTL8192CU Wireless LAN 802.11n USB 2.0 Network Adapter) and it still doesn't work. It says it's installed but when I try to connect it says there's no driver installed... I would like 2 format the USB adapter and then try to install but can't find a way. Any ideas out there??

<Moderator edited font style and format - to make it possible to read >
 

A:Solved: Belkin Surf & Share Wireless USB Adapter died

Read other 11 answers
RELEVANCY SCORE 59.2

I have FINALLY got to the bottom of why my PC is freezing, after weeks of trial and error. It runs perfectly normally when I unplug the Belkin USB Wireless adapter. Is there a way of repairing this? Do I need to download something to stop it from happening?
 

A:Solved: Computer crashes when Belkin Wireless USB Network Adapter is plugged in

Read other 13 answers
RELEVANCY SCORE 58

Hello, this problem has really confuzzled me. I have just bought a new wireless USB adapter, ran it through the setup entered the password etc. Fine. Nicely connects to the router everytime (well ok most the time). But it cant seem to find the internet, which i know is there because my house mate has no problems with it. I've read quite a few complaints about this adapter. Is it worth just returning it and trying a different one? Or does anyone have any ideas?

It finds the submask, ip address, sets a channel automatically. One thing i noticed though is it doesnt create a gateway. (i asume cos i cant find the net). I did have internet before but they were wired. I've since then disabled the normal ethernet adapter and disabled the old connections. So i dont think theres anything conflicting.

Please help?!!
Thank you in advance i really appreciate it.
 

A:Belkin Wireless adapter - can connect to the adapter, but not the internet!!!

I'm going to guess that the IP address that it finds is 169.254.x.x and the subnet mask is 255.255.0.0, right? It's really NOT connecting to the router, which is why you don't have a Default Gateway or DNS servers.

You don't have to disable the wired interface to connect wirelessly, there's no conflict.

I'd suggest you first disable the encryption and see if it connects. If it does, then you need to make sure you enter matching passwords for the encryption on each end. Note that for WEP you should ONLY use the HEX password, do not use the passcode option.
Please supply the following info, exact make and models of the equipment please.

The name of your ISP and country of residence.
Make/model of the broadband modem. If dial-up, please specify.
Make/model of the router (if any).
Connection type, wired, wireless.
If wireless, encryption used, (WEP, WPA, WPA2, etc.)
Make/model of network card or wireless adapter.
Make/model of your computer (motherboard if home-built).
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP2.
 

Read other 3 answers
RELEVANCY SCORE 54

Hello my problem is router belkin n-450 modem westell 6100 on windows vista.All lap tops work fine wireless but pc not connected to pc.IPV4 LOCAL IPV6 LIMITED.Router and modem are working together as they should just can not connected to the hp computer.Any guesses to what it could be.
 

A:Solved: Belkin n-450 problems

can we see the following information from the HP

what wireless security are you using ?
you may want to log into the router and remove the wireless security and see if the HP now connects
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
------------------------------------------------------------------------
Run Xirrus Wi-Fi ... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

I have the PCI Belkin F5D7000 v7000 Wireless Card.

It has the Realtek RTL8185L chipset.

This card has given me nothing but problems. The computer is running a fresh Windows XP install at the moment. I installed the drivers as Belkin instructs (install software, turn off computer, plug in the card, restart), and the wireless card is detected by Windows.

I can see our Home wireless connection, but the computer refuses to connect to it.

The Belkin utility says "This connection has Limited or No Connectivitiy" when I use it.
Windows XP's wireless utility refuses to connect to the network. It can see it, but if I try to connect, it states, "Windows is unable to connect to the network" etc

My laptop, in the same room, is connected to the network via wireless and is flawless. I don't get one drop out.

On rare occasions, on reboot, the wireless SOMETIMES connects, and I can get on the internet. This doesn't last long, with the Internet dropping out, massive lag spikes and I cannot reconnect, I get sent back to the error message stated above.

I reinstalled Windows XP just in case of something fishy, and that hasn't helped.

I also have used drivers for the Realtek chipset (doesn't even let me use wireless, so useless), the Belkin drivers on the CD, and the latest Belkin drivers for the V7 card, off Belkin's website. Both Belkin drivers give me the same problem which I've mentioned above.
 

A:Solved: Belkin F5D7000 V7 Problems

Read other 16 answers
RELEVANCY SCORE 53.2

sorry if somebody has asked this before,i have searched but can't find anything that helps me,but then again i can be a bit thick!

i have been using a belkin g router model f5d7230-4 version 7001uk for about 2 years to run a wireless network for my laptop.The router was wired into my pc via ntl/virgin modem,this pc was running windows xp and my laptop is running windows vista.
problems have now started because i have a new pc running windows 7.i have attempted to set the router up in exactly the same way as i had before except this time after going through the whole installation process and the router attempting to connect to the internet 10 times i get the unhelpful error message :- 'problem connecting to the internet' and to contact belkin support team.
i have reset the router to factory settings

strange thing is my iphone picks up the wirless connection and connects to the internet with it,even though my pc won't.and my laptop can't even see the wireless network.

i can connect to the internet without router,just plugging cable into back of computer with no probs

please help

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Celeron(R) CPU E3300 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 468937 MB, Free - 446853 MB; F: Total - 238472 MB, Free... Read more

A:Solved: belkin g router problems

Read other 16 answers
RELEVANCY SCORE 53.2

I have a Belkin F5D7230-4 Wireless G Router connected to my desktop running XP Pro. I connect to my router with my Toshiba Satellite M115-S1061 laptop that's running Vista Ultimate. I've had my router for about 8 months now and have had no problems with it. But about two weeks ago it started acting up. The signal is strong and the taskbar icon shows I'm connected, but it won't connect all the way to the Internet. The problems is not only with my laptop, because the connection to the Internet is also lost at the desktop. I've uninstalled and reinstalled the router, but no change. Any suggestions???
 

A:Solved: Belkin Router Problems

Sounds like either your ISP is having a problem, or the router and/or modem is the issue.

From the desktop connected directly to the modem, please do this.

Register at DSLReports and run their Line Quality Tests. Post the results link from the top of the test display page here.
 

Read other 1 answers
RELEVANCY SCORE 53.2

I have a Belkin F5D7230-4 Wireless G Router connected to my desktop running XP Pro. I connect to my router with my Toshiba Satellite M115-S1061 laptop that's running Vista Ultimate. I've had my router for about 8 months now and have had no problems with it. But about two weeks ago it started acting up. The signal is strong and the taskbar icon shows I'm connected, but it won't connect all the way to the Internet. The problems is not only with my laptop, because the connection to the Internet is also lost at the desktop. I've uninstalled and reinstalled the router, but no change. Any suggestions???
 

A:Solved: Belkin Router Problems

Read other 9 answers
RELEVANCY SCORE 53.2

I made the mistake of posting this in a solved forum, so I am making a new thread now. The solution was returning the router and getting a different one which is not an option for me.

But here is a link to the original post:
http://forums.techguy.org/networking/623333-solved-belkin-router-dmz-problems.html

Basically, my XBox 360 has a static IP and when I enable DMZ with it's IP the rest of the computers on my Network stop working. I can ping but when I try to browse everything times out. As soon as I turn DMZ off everything works again except my XBox 360.

~RediXe
 

A:Solved: Belkin router DMZ problems...

Read other 7 answers
RELEVANCY SCORE 53.2

My router works fine, but the problem happens ONLY when i set my xbox 360 outside of the firewall using the DMZ feature. The firewall is ON on my router and then i set my xbox outside of the firewall (which makes xbox live happy) BUT then my computers internet completely stops working.. the only way to get it to work is to turn OFF the firewall all together which then makes my xbox not happy while on live. It seems i can only have one or the other i dont get it, why is my computers internet cutting out when i set the xbox outside of the firewall? I'd set them both outside of the firewall if i could, but the xbox needs to have NAT set to open and the only way i can manage that is by using the DMZ feature (turning the firewall off completely doesnt seem to do it)
 

A:Solved: Belkin router DMZ problems...

Read other 16 answers
RELEVANCY SCORE 52.4

Hi there ppl just wondering if sum1 could give me advice on get getting a network set up between 2 pc's, i have installed the router and the belkin usb adapter but it keeps coming up not connected code 10, i did have an adapter already installed but it kept disconnecting so bought a new 1 now i am having problems could any1 plz advise me thanx!!
 

A:Belkin usb adapter

Code 10 sounds like you don't have the drivers loaded, or they're the wrong drivers.

Perhaps it would be easier if we helped you get the first adapter working.

Please supply the following info.

The name of your ISP and country of residence.
Make/model of the broadband modem.
Make/model of the router (if any).
Connection type, wired, wireless.
Make/model of network card or wireless adapter.
Make/model of your computer (motherboard if home-built).
Version and patch level of Windows, i.e. XP-Home SP2.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Hi Guys i am trying to setup my Broadband connection. i read the whole 510v6 manual but was not able to find how can i set the 510 v6 modem into bridge mode. Please help me.
 

A:Solved: connect Speedtouch 510V6 with Belkin belkin f5d8231

Read other 7 answers
RELEVANCY SCORE 52.4

Hi guys I have just been reading up on a post that was on here a while ago regarding someone not being able to connect to Xbox Live with his new Belkin N+ router now i have a Belkin N router and have had similar problems with it either not connecting or not being able to join mates games/parties and after a lot of time with Xbox and Belkin (neither knew the problem) i found out after a lot of messing about what to do and i hope to be of services to others by posting this.

First of all you will need to be able to login to your router setup page online...the normal ip address for belkin is 192.168.2.1 sometimes this can be different and you can find out how to check your ip address on youtube...oh and each step that you do please Apply changes before moving on as the router cants update all the changes in one go

Once logged into your router there are a few things we need to do... First is to look on the left hand side of the screen and locate the "firewall" link once the page has loaded you will want to Enable the firewall.

Next you will need to turn on you xbox and go to System settings, network settings then configure network to find out what IP Adress your xbox is on...I set mine up manually so the ip address for my xbox will never change ... again can see how to do this on youtube... write down or keep a mental note of this address YOU WILL NEED THIS.

Next open the "virtual servers" which is under the firewall link this is where we are going to open... Read more

A:Belkin Router and Xbox live problems SOLVED

Read other 6 answers
RELEVANCY SCORE 52.4

I don't know if this is the right place for this, but I'm having some problems with my battery back up. I unplugged it to rearrange my desk, and now, the battery back-up side doesn't work. The surge protector side is good as gold.

Any ideas?
 

A:[SOLVED] Belkin F5C500 Battery Back-Up Problems

Did you leave it unplugged for a long time? Did you give the battery time to recharge? If so, sounds like you'll need a new battery.
 

Read other 2 answers
RELEVANCY SCORE 51.6

Hi! Just wondering if you guys can help me out...
I just got a new pc with Vista Home Premium x64. Here are the specs
Athlon 64 X2 6000+
4GB RAM
512MB GeForce 8600GTS

It works fine except when I have tried to install my Belkin USB wireless adapter. I went to Belkins site and it told me to download the Ralink drivers, which I did. Nothing. Vista tells me that the device is working properly, but the light on the adapter is not lighting up, and Windows does not pick up any networks at all. I tried the PC with a second, identical adapter to see if it was the device causing the problem, but I have gotten the same response, which lead me to think it was an issue with Vista.

If anyone could provide me with some advice I would be very grateful.

A:Belkin Wireless Adapter

no one?

Read other 10 answers
RELEVANCY SCORE 51.6

I have a Belkin Wireless USB adapter Model number f5d7050b, I have been useing this for a bout week trouble free then one day I turned my pc on and it just wouldn't connect it can see my router on the list of routers to connect to it ses acquiring network ip then just goes back to the list of networks scree, then I tried to right click the icon on the tool bar and click repair and whn I do e this it ses that it failed to renew the IP address can someone help me please it would be much appreciated
 

A:Belkin USB adapter not connecting HELP!

Make sure you have the latest driver from Belkin's web site.

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

[Press ENTER after each command.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 51.6

I'm at the point where I know I can't fix this myself. There was a virus on the computer, rootkit.zeroaccess, which has been (supposedly) removed and winsockfix has been run. My operating system is XP 2600 sp3, but the disc cracked long ago, so I can't fix anything.

We had AVG on this computer, but 2012 didn't load, and when I tried to install it from a flash drive, it said it required internet access (although I'm sure I saw a CD for AVG 2012 arrive in the mail, but we can't find it!).

Since the PC is nowhere near the router, I use a Belkin wireless adapter, which is showing when it connects. I can view the wireless networks in range, but I can't connect. In addition the PC seems to think the hardware is not connected for the wireless connection.

I keep changing the setting to automatically connect, but I have to do it over and over. Also, when the computer restarts wireless zero configuration doesn't start, although it is showing "automatic" in services -- and starting it doesn't seem to make a difference, except then it will let me view the wireless networks.

So -- what are my options now?

A:belkin adapter connects but not pc

Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

Read other 23 answers
RELEVANCY SCORE 51.6

Hello,
I have tried paring my Laptop with my Blackberry, but get a service error message when I check the box marked "Turn on Discovery"

My Phones bluetooth is on but will not find devices.
Please Help.

Thanks
 

A:Belkin Bluetooth Adapter

Has this worked before OR is this a new installation of the bluetooth adaptor.
Has the adaptor been recognised
See this please
http://en-us-support.belkin.com/app...FyY2hUeXBlIjoibWVudWZpbHRlciJ9fX19fSwiYyI6Mn0.

That service error message on selecting Turn On discovery is more than likely a driver issue for the adapator.
Is there a warning on device manager for the Belkin.

On a more general basis if this is a new installation - does this assist
http://www.ehow.com/how_5128365_install-bluetooth-windows-xp.html
 

Read other 1 answers
RELEVANCY SCORE 51.6

i bought a belkin f5d5000 network card, although it seems to install in the hardware profile, it just wont show up in the network settings box... this is the first time ive ever encountered this, im on win 98se, and thought maybe it was too old, but then saw others with sucess... anything i might be doing wrong?
 

A:belkin network adapter

Read other 7 answers
RELEVANCY SCORE 51.6

i oght it today and installed the disk when everything was installed and i pluged it in my computer the usb device dident detect the wirless signal i have a netgear wirless router and all the other computers recive the signal but mine its not detecting the signal the loptops at my house recive the signal all the way out side please help
 

Read other answers
RELEVANCY SCORE 51.6

Hi, my name's Wallace.
I'm using a Toshiba Satellite C55Dt=A5306 running Windows 10 Home Edition.

A few weeks ago, the internet adapter within my laptop decided a hilarious April Fool's Day joke would be to die.
Well, I'm not laughing.
So I went into my closet and grabbed my old Belkin Wireless G USB Network Adapter, hoping to install it and have it work.
I plugged it in, and forgot that I needed the CD. So I found it shattered in about 5 pieces in my closet. Found the software online, and downloaded and ran it.
Ran into this error at the end of the install:

"cannot install service: MDC8021X
Status= 0x00000001"

Help, please!

Read other answers
RELEVANCY SCORE 51.6

Hey, i just upgraded from windows XP to 7 and i need to install the wireless adapter or else i cant use the internet but when i try to install it, it says it cannot find the driver, now i have all my old files from my computer on there so the driver is there but it wont use it and whenever i try to install it it doesnt work, please help otherwise i cant use that computer for the internet

A:Belkin wireless g adapter

Tell us your motherboard and we will tell you where to get your driver.

Read other 9 answers
RELEVANCY SCORE 51.2

I just ordered this adapter after trying a netgear wireless card that crashed my computer. After I ordered, I read lots of negative reviews on amazon about it. Has anyone used this adapter and what happened? Thanks for anything, Buck
 

Read other answers
RELEVANCY SCORE 51.2

Hi,
I have recently purchased a belkin F6D4050 N150 Enhanced Wireless USB Network Adapter and installed the driver from belkins site. The adapter stays disabled regardless of me trying to enable it. I have been trying to solve this for days!! I have followed your instructions and the ones on the other thread but now I don't know what to do Please help

A:Belkin wireless adapter problem

  
Quote: Originally Posted by antbtr


Hi,
I have recently purchased a belkin F6D4050 N150 Enhanced Wireless USB Network Adapter and installed the driver from belkins site. The adapter stays disabled regardless of me trying to enable it. I have been trying to solve this for days!! I have followed your instructions and the ones on the other thread but now I don't know what to do Please help



Hi antbtr and welcome.

First we are going to need your system specifications, and network setup so we know what we are dealing with.

Can you tell us if you are using homegroup for your network?

What kind of encryption are you using?

Jan

Read other 5 answers
RELEVANCY SCORE 51.2

I have a Belkin F5U409 serial to USB adapter that I'm running on an IBM laptop (T41) running XP.

If I conect the adapter before I boot up the PC it crashes with a blue screen. If I boot up without the adapter conected all is fine.

I know the simple fix is to unplug the adapter before I boot up - but you wouldn't believe how many times I forget.

Does any one have any ideas on fixes for this problem? I have checked the Belkin site for newer drivers but they are all older than the ones that came with the adapter.

For what it's worth - windows gives a message about the driver not being certified when I install it ( and the install instructions say to just ignore this and keep going).
 

A:Belkin F5U409 Serial to USB adapter

Read other 7 answers
RELEVANCY SCORE 51.2

Hi everyone. Lately had a problem with the wireless signal dropping on my Belkin wireless adapter. It happened at anytime. After reading on the forums about changing channels I thought I would change the drivers first.
Looking on Belkin website and finding the drivers for Window 7, 32/64 bit, I found the ones I wanted (I think). Did a system restore then loaded the new ones in. The old ones if you want to call them that looked like they were uninstalled at the same time.
Lets see if this does the trick. I never fancied changing the channels cos I would have to do it on the laptop also and I have this uncanny knack of messing things up.
The advice I guess I am putting forward is to try to update drivers before doing anything else AND do a system restore point before you start, it only takes a minute.
Cheers everyone for all your good advice.

A:Drivers for Belkin Wireless adapter

Hi raccoon19,

Did your solution of reinstalling the drivers first end up working? Let us know if not, and we'll try to help out.

Cheers,

Walker
Windows Outreach Team

Read other 5 answers