Over 1 million tech questions and answers.

Speaker volume goes up and down

Q: Speaker volume goes up and down

Hello everyone,
I have recently noticed that my speaker volume is going up and down by itself. It happens when i'm listening to music, playing games, everything. I have a kt3 ultra mobo, with onboard Avance AC'97 audio 5.1 surround sound speakers. I've played around with my audio options when i noticed the problem and can't figure out what is going on. Please give me some advice.

Thanks

RELEVANCY SCORE 200
Preferred Solution: Speaker volume goes up and down

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Speaker volume goes up and down

Any batteries involved in your audio loop? Replace.

Any volume controls on your keyboard? Try disabling keyboard audio control.

Any Windows utilities running that control audio? Running in the System Tray, and check Task Manager. Close any extra audio-related apps.

Otherwise, it could just be your speakers, or sound card amp, going out.

Read other 2 answers
RELEVANCY SCORE 62.4

I recently discovered a difference in the volume; the left speaker of the laptop has been functioning normally while there seems to be very low to no sound coming from the right speaker.

Any suggestions?

A:Dell Inspiron 15 5559 Audio - Right Speaker has low volume while the left speaker functions normally

Hello.You didn't mention the headphone jack, so if you have not yet done so, plug in headphones and see if the balance is okay in them. If the headphones check out okay, then most probably it's a problem related to the speakers.
The test for speakers is the ePSA audio test. It is a hardware test, which means that if the test  tones are very low in the right speaker, but normal in the left speaker, then there is hardware failure somewhere, related to the right speaker.
If both speakers sound normal during the test, then the problem is in the software. Do the usual things like re-install the audio driver, check the balance levels in the Sound properties, try different audio sources, etc.
Re-installing the audio driver resets the settings to their default configurations, so if you do it then you don't have to bother with things like volumes and balance settings, because they will be okay.(Also if the balance is okay through headphones, then it should be okay through the speakers too.)
Here is how to do a simple driver re-install:
1.    Open the Device Manager.2.    Expand the "Sound, video & game controllers" category.3.    Right click on "Realtek High Definition Audio".4.    Click "uninstall".5.    Do not check the box to “delete the driver software for this device”. 6.    Restart the computer. Windows will detect your device a... Read more

Read other 1 answers
RELEVANCY SCORE 52.8

Good morning

I am having problems with my computer & speaker volume. It started since family members plugged I-pods in to listen. I have checked all areas on my computer (that I'm aware of) to make sure that all volume is turned up. My actual computer volume is very low also. I have not tried to plug different speakers in though

Can anyone please help?

Thanks...Deb

A:SPEAKER VOLUME VERY LOW

Well...try different speakers first, to eliminate that possibility.

Louis

Read other 2 answers
RELEVANCY SCORE 52.8

I uninstalle my extra media players to just use windows media player, I ended up with low speaker volume even though I have maximised all speaker settings. Anyone have a fix for this problem?
 

A:low speaker volume

Read other 8 answers
RELEVANCY SCORE 52.8

Dell Dimension 8200
Windows ME
Sound Blaster Live! Value Digital 1024 Software
Harmon Kardon Speakers

The right (volume control) speaker has lost about 80% of its volume. If you hold it to your ear, you can hear that it has sound. Left speaker is fine.

I purchased a set of new speakers - no good.
I ran OEM Sound Diagnostics - no good.
I have run every audio test and made every volume adjustment that I can find to make.

Is it the sound card?

pc
 

A:Low Volume on one speaker

Read other 8 answers
RELEVANCY SCORE 52.8

Just got a "new" used computer tower. It's a Compaq Presario Deskpro...Anyway, when I try to listen to CDs or the radio on the internet, the volume is SO LOW! I have the volumes maxed out. I've read some of the other posts regarding this and tried some of the suggestions to no avail. Are some speakers not compatible w/certain computers? Help! Amy
 

A:low speaker volume

Read other 16 answers
RELEVANCY SCORE 52.8

I have a computer running some crappy speakers, and for some reason I can barely hear anything from them. I read other posts that talked about not having amplified speakers, and that I should just get amplified ones and be done with it. The only thing that gives me pause is that when I shut down for the night, and you get the windows "shut down" sound, it is really loud. So I tried them on another new computer of mine, and they worked fine. I have obviously checked all the volume settings and they are all on and turned up all the way. Any ideas why this might be happening.

Thanks in advance.
 

A:Speaker Volume is really low

Hi CluFunkBunk, and welcome to TSG.

CluFunkBunk said:


... the windows "shut down" sound, it is really loud ... Click to expand...

If you go into the "Sounds and Audio Devices" control panel and then select the Sounds tab can you play some of the other system sounds at a fairly loud level?

If so, exactly when do you get lower volume levels? Does this happen with certain programs?

CluFunkBunk said:


I have obviously checked all the volume settingsClick to expand...

Can you give us the details of what you have checked so far? We have no way of know what you mean by, "all".

Some details about the sound controller hardware being used as well as what operating system you are running may help us to help you. Do you have a separate sound card or is sound built-into the motherboard?
 

Read other 2 answers
RELEVANCY SCORE 52.8

My brandnew ASUS laptop, using Windows 7, is supposed to have really good speakers. The volume icon is a circle; at full blast, the icon only covers 25% of the circle. The volume just isn't what I would have expected. Any suggestions? Thank you.
 

A:speaker volume

I'm not sure what measures you've taken in trying to natively adjust the sound (like in this video: http://windows.microsoft.com/en-US/windows7/Adjust-the-sound-level-on-your-computer). I find that more times than not, you can usually right click the sound icon and select "open sound mixer" and adjust the sound to your liking from there.

-- Ryan
Windows Outreach Team
 

Read other 2 answers
RELEVANCY SCORE 52.8

Hi all,

Recently I had to replace my CPU and now my speakers are not as loud as they were with the other one. I have all the volume controls up as high as they will go on my computer and there is no volume knob on the speakers.

Is there another way to make them louder that I am unaware of?

Thanks
 

A:Speaker volume

Read other 15 answers
RELEVANCY SCORE 52.8

I just put together my gf's new Compaq computer. She has an AMD chip and is running XP Home. Realtec AC97 on board sound. Polk Audio speakers with no volume adjust on the speaker, controlled by computer. Problem is the sound will only go up so far, which isn't very loud at all. Speakers worked fine on her previous computer. They are configured correctly. Any clue as to why this would occur? Thank you for any insight.
 

A:Speaker volume too low.

Read other 6 answers
RELEVANCY SCORE 52.8

Hi everyone,

I have only recently upgraded to Vista from XP, I'm very pleased with everything apart from this sound problem, which from what I've read is very common. I was hoping to watch movies on my new widescreen monitor, but the sound is just not loud enough with all settings on max.

The problem I'm having is that my speaker volume is very low, I'm using fairly old speakers, but these speakers were very loud on my old computer running XP.

Anyway I've installed the latest Realtek driver & it has made no difference what so ever. Every setting is set to max volume, does anyone know how I can boost the volume? Or maybe someone else has had this problem & found a solution, I'm wondering if new speakers will make any difference?

The only sure-fire solution I think of so far is installing XP, which would mean losing Vista, as I've not got a disc with it on, the computer came with it loaded already.

Please help! :|

A:Speaker volume is very low

hey there. recently my sound was working fine until i installed this sigmatel driver update from gateway's web site. after installing that it made my sound icon get the damn red x icon and it didnt work. i then read on here about the realtek and tried that but nothing. it seems though that i have to now do the setup again for the original sigmatel driver under the cabs folder (64 bit system) and then it goes back to green and the sound works. i don't restart it though i just click no on that. i don't know if that will help depending on your system i suppose.

Read other 1 answers
RELEVANCY SCORE 52.8

After the most recent Windows 10 update, my speaker volume has decreased substantially. The change in volume pre- to post-update is very evident. I use my speakers very often so I would like to fix this problem as soon as possible.  Thanks

Read other answers
RELEVANCY SCORE 52.8

i just took speakers from my old pc and put them on my new pc, but they are a TON quieter. anyone know why that is? im running Win xp pro sp2. asus m2n e motherboard.
 

A:speaker volume is really low...

Read other 7 answers
RELEVANCY SCORE 52.8

Ok, dig, I am a Mac guy and I had to get a Windows laptop for work. So please understand I don't know anything.

First easy question : I have a Braven Balance B/T speaker, when I connected it (Which took like 15 minutes ??) it gets labeled as a headset. It's a speaker!

Then the volume is very low, I can turn up Pandora, the main system volume and I still believe it's low. Also, I do not have the Properties > Levels > Enhancements like I have read about. Under Levels I get Balance, that's it.

Can someone who is patient help me thru this starting point and maybe we can go further. I can provide screen shots of anything necessary.

Thanks so much.

Read other answers
RELEVANCY SCORE 52.8

Hello,The sound out of my speaker is too low. I have tried both updating and restoring the plugin but no change. I have gone through the speaker advanced menu in speaker properties but there is no improvement. Please help me get most out of this amazing laptop which is supposed to have great bang and olufsen speakers. Thank you

Read other answers
RELEVANCY SCORE 52.8

After the most recent Windows 10 update, my speaker volume has decreased substantially. The change in volume pre- to post-update is very evident. I use my speakers very often so I would like to fix this problem as soon as possible.  Thanks

A:Low speaker volume

Hi: The latest W10 update messed up the audio in almost every one of my HP business desktops and notebook PC's. I had to reinstall the audio drivers to get everything to work right. Two of my PC's do not have W10 audio driver support. For my HP 350 business notebook, I had to reinstall the W8.1 IDT audio driver, which restored normalcy. For my HP dc7800 business desktop, I had to reinstall the W7 Soundmax audio driver, which restored normalcy. Your notebook does not have W10 audio drivers either. So, here are two recommendations for drivers I have... First, create a system restore point in case these drivers make a bad situation worse, and then you can revert to your current status. Then reinstall the W8.1 audio driver from your notebook's support page and restart the PC This package contains the driver that enables the IDT High-Definition (HD) Audio in supported notebook models that are running a supported operating system. http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59654.exe If that doesn't fix the problem, try this IDT audio driver from a newer model notebook (15t-j100) that has the Beats Audio. Install and restart the PC. This package contains the driver that enables the IDT High-Definition (HD) Audio in supported notebook models that are running a supported operating system. 6.10.6491.0 Rev.     Sep 30, 2013 http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe

Read other 1 answers
RELEVANCY SCORE 52

Using a program to restore LP's and burn to CD's. Noticed that the right speaker has little volume. checked all the cables which are ok. also burned a couple of the restored songs and played them successfully on an audio cd player - good volume on both speakers.

Have installed and uninstalled the most recent drivers for the audio card.

After all of this when Settings, Control panel, Sounds, Configure, Test is checked, sound is ok from left speaker but greatly muted from right.

Any ideas would be great.

Thanx.

brews
Intel duo core E6750
Intel DG33FBC motherboard
2Mb ram
ESI [email protected] Sound Card
ATI Radeon X1050 256Mb PCIe
Philips spd2413p mp01 cd/dvd
Vista Ultimate
XP Pro on VM
 

A:right speaker not at full volume

Go to control panel, choose sounds and stuff section, choose volume on the bottom left, and put the left right sliders in the same line.
 

Read other 2 answers
RELEVANCY SCORE 52

I've just purchased an HP laptop (G62-415NR) with Windows 7 Home Premium (64 bit). Naturally, there is very little documentation included, for either the computer or the operating system. I'm new to Windows 7. (I've set my system specs in my profile, in case further info is needed.)

I don't know whether this would fall under customizing the laptop or the operating system; I plan to also find an HP forum in case this is not the appropriate venue for this question.

The issue is that I cannot set Internet Explorer to fullscreen using the F11 key, because pressing F11 causes the volume control to pop up instead. Worse, when I use the View menu to set the browser to fullscreen, I cannot F11 it back.

Does Windows 7 map the F11 key to the volume control, or is this an HP-specific setting? If this is a Windows 7 setting, how can I change the keypress that launches the volume control, so that I can get back to the browser functionality I'm used to?

Thanks in advance.

A:F11 conflict (IE 8 / speaker volume)

Hello Byff, and welcome to Seven Forums.

On laptops, you may need to press the F Lock (Function) key, or press and hold the Fn key, before pressing F11 to toggle full screen mode.

Hope this helps,
Shawn

Read other 3 answers
RELEVANCY SCORE 52

Hello, any help I could get would be greatly appreciated!
I have a new Toshiba Satellite Pro, I've only had it for a month or so, and last night the volume was working fine while viewing shows on Hulu. This afternoon, when I went to listen to itunes I noticed that even when I pushed the wheel dial to full volume, the sound was low, almost nonexistant while typing. When I click on the volume icon it shows that it is on max volume but still, I can barely hear anything and it is the same with headphones plugged in. I'm not sure what else to try? Thank you so much for your time!
 

A:Laptop Speaker Volume

Hello friend,
Check control panel - sounds and audio devices and make sure that all the volume options are all the way up. There's several different ones, including speaker volume. However, there's a few laptops out there that just have terrible speakers that are very hard to hear, and there's nothing to be done about it.

Thanks,
James
 

Read other 1 answers
RELEVANCY SCORE 52

when i restart my computer the sound icon on the taskbar is missing, yet when i go to the control panel and select the sound it is checked. it says place volume icon in the taskbar. If I uncheck it and then click apply and check it again and click apply it comes back. I am not hiding any icons on the taskbar. This is a new computer only a few weeks old.
What could be the trip?
 

A:Speaker Volume control

Try this fix from kellys-korner.
Scroll down to line #30,
Windows XP Doesn't Save User Settings
instructions to run regedits at top of web page.
 

Read other 1 answers
RELEVANCY SCORE 52

only getting low sound on full volume . checked volume level indicators and they say all is o,k.
 

A:speaker volume problem

Read other 8 answers
RELEVANCY SCORE 52

I was just given this computer upgrade at work. I have the external speakers that I had with the old computer, but now I can hardly hear my cds! I've checked all the volume controls. Our tech person doesn't have time to deal with this "personal" issue. Could there be something in the sound card or some other hardware issue that just doesn't allow louder volume? I'm no expert on how computers run, so maybe there is something I'm overlooking.

A:Low External Speaker Volume

Is the master volume or any of the other volumes set low? Checking threw
Start -> Control Panel -> Sounds and Audio Devices
In there are a few different volume settings that might be set to low. In the volume tab If you click the Advanced button under the Device volume it brings up a few different audio options, inculding master volume. I'm not sure if you checked that yet if not, I hope that helps. (I wasn't sure if you meant volume controls on the computer or on the speakers...some speakers can have several different types of volume control)

Are you using a seperate sound card, or a integrated sound card?

EDIT: I have my control panel set up under classical veiw, if you do not click
Start -> Control Panel -> Sounds, Speech, and Audio Devices -> Sounds and Audio Devices

Read other 3 answers
RELEVANCY SCORE 52

Toshiba Satellite 1805-S253, Win ME.

Recently tried to install an 802.11g PC card, lots of issues, and had to have a local shop uninstall, fix registry, and repair video drivers and stuff.

I don't want to go back to them, but I now have no sound other than the modem will deliver the dialtone sound. Media Player is silent. No Speaker icon in the taskbar.
No way to click "show volume control in taskbar": I can see it, but it is inactive.

Specs say ALI M1535, and Trident AK4543 Codec.
Device Manager says there is an ALI WMD driver.

Looked all over for an easy driver download.... aargh.
 

A:No Volume/Speaker in taskbar

Read other 7 answers
RELEVANCY SCORE 52

Hey, recently i was palying my music pretty loud with a few friends over and the volume spider on the speakers broke. as in they're always on the top now, i can turn down the pc volume to 0 and still hear static buzzing. its really getting anoying, i thought i could deal with it and jsut turn the volume on my pc down but its getting to the point where its crackling and making lo screeching noises. is there an application thats able to change the volume on the speakers themselves and not the pc?
 

A:Speaker volume broke

Speakers are very fragile. The failure rate is very high when they are over-driven. The only real fix is to replace the speakers, and perhaps the audio card as well.
 

Read other 1 answers
RELEVANCY SCORE 52

Hi, i have a dell inspiron 1501 the speakers driver is called sigmatel audio.

i have been searching the internet for some software that will allow me to boost my speakers above max for a while now.

i cannot find the software to do this but i have heard people speaking about it etc.

so does anyone know how i can boost my speakers above max.
Thanks.
 

Read other answers
RELEVANCY SCORE 52

Hi, As per my product specifications of HP ENVY 15-k203TX Notebook PC i have BeatsAudio with 2 speaker and 1 subwoofer but the volume is very very low from speaker. Even though the volume level is 100% full. Can anyone help it out with this issue? Bye,Siva

A:Volume is very low from speaker even though BeastsAudio is t...

Hi @Varadar, Thank you for posting at HP Forums! I have read your post and wanted to help. I understand that even you put the volume level to 100%, the sound from the speakers is still low. Is the volume low when you play a specific audio file or when you play all the audio files?You can try the steps on this link. Thanks for being a part of the HP community. Please let me know if this helps resolve the issue by marking this post as "Accept as Solution". If you require further assistance let me know and I will gladly do all I can to help. If you wish to say "thanks" for my effort to help, click the "thumbs up" to give me Kudos.   

Read other 3 answers
RELEVANCY SCORE 52

my system info. intel r pentium r 4 pu 3.40ghz. memory 1022 mb. operating system windows xp pro. 32bit service pack 3. my problem is the volume on my attached speakers is stuck on low even when turned on full. ihave done the various volume level checks and they all say all is o,k. i need help.
 

A:speaker volume problem

=buddysbestfriend;7901397]my system info. intel r pentium r 4 pu 3.40ghz. memory 1022 mb. operating system windows xp pro. 32bit service pack 3. my problem is the volume on my attached speakers is stuck on low even when turned on full. ihave done the various volume level checks and they all say all is o,k. i need help.[
 

Read other 2 answers
RELEVANCY SCORE 52

I am trying to set volume (or mute/unmute) for a wireless Bluetooth speaker in an executable file that I could set as a scheduled task so that my wireless speaker will be silent until such time as the task is run. I have a stock market analyzer running at all times but I only want to hear alerts after 4am, so I really only want my wireless speaker to have volume after 4 am. Now I’m no tech guy so let me explain what I have tried so far and maybe someone could suggest something else to try.

I have tried using executable mixer or volume programs such as Mute, Wizmo, NirCmd, QuickMix, eeePC Wave Control App, etc. Then setting them to run via Scheduled Task. This works fine for the mixers relating to all of my other sound cards but will not work on the Bluetooth mixer.

The mixer associated with the wireless speaker only changes the volume in the “Wave” fader. The “Speaker” volume or “Mute all” have no effect on the wireless speaker. And conversely all of the above executable volume programs only have access to the “Speaker” channel. (they can access other channels for other soundcard mixers but not the Wireless mixer)

Now this is pure speculation on my part, but I think the fact that the wireless speaker itself has a wireless volume control is what blocks other programs from having access to the “Wave” channel. The speaker has a USB dongle that connects it to the comp... Read more

Read other answers
RELEVANCY SCORE 52

I got a new Vista pc and everything is mostly set up. I have onboard sound. All the speakers work, except one barely emits any sound. No distortion, just barely audible. i noticed this when I tested the speakers individually. My guess is the wiring. The speaker in question is one of the rear ones. I turned the rears up but no change.
Anyone?

I have Klipsch ProMedia 4.1, got around 4 years ago.

They worked fine in my old XP machine, but while turning the volume knob, there was a staticy sound. There was major static in the new machine for the first 2 days, then it died down and the speakers were normal, except for that one rear.
 

A:One speaker=low volume in 4.1 setup...???

One thing I learned long ago is don't mess with the volume nob that is on the speakers. Crank it up to about 3/4 and leave it there, using nothing but software to adjust the volume from there on out.

That "static" sound you hear is usually dust that gets on the contacts inside that volume knob. It can cause low volume in one or more speakers, or it can cause a speaker to stop putting out sound at all. I've tossed out at least 4 sets of speakers because of overuse of that unnecessary infernal knob on the speakers. If you set it to the max you could ever want, and leave it there, using only software to adjust, it won't wear out or have static problems.

The fact that you have those static noises when you use the knob, combined with the low volume in one speaker tells me the two issues are cause by the same thing. A worn out, dirty (inside, where the contacts are) knob.
 

Read other 3 answers
RELEVANCY SCORE 52

Hi;

How can I increase speaker volume beyond the max settings in volume control?

Thanks!

A:How to further increase speaker volume?

buy a sound system that connects to your computer and has it's own amplifiier

Read other 6 answers
RELEVANCY SCORE 52

I have dell inspirion 14z 5423
the sound in earplugs and external speaker is normal.
but when it comes to the laptop speaker its very low, actually sometimes its not audible. I tried to update the drivers but its the same
the speaker and skull-candy made hence i got it and was having a lot of expectations .
but it turned into a disaster.
Can yo help me??????
 

Read other answers
RELEVANCY SCORE 52

In the last week or so I've noticed that on many sites, even when I've got the volume at it's highest and my speakers turned all the way on I'm barely able to hear what's being said. The speakers seem to be working properly - I hear through both of them but not as loud as it was before - I always had to keep the settings at their lowest.
Any idea why this has happened and is there somewhere to re-set the volume?
 

A:Speaker Volume Suddenly Low

Maybe the speakers are dying... Have you tweaked any sound settings/drivers/sound cards, etc?
 

Read other 3 answers
RELEVANCY SCORE 52

I have a Dell Desktop with two external speakers. When I use Windows Media player or any other player, the sound through the speakers is fine. However, when I want to watch videos using the internet (both Internet Explorer and Firefox), the speaker volume is very low. Suggestions?
 

Read other answers
RELEVANCY SCORE 52

Am facing low speaker volume in my lappie even with 100% speaker volume.mine was a original win 8 upgraded free to win 10 and upgraded again about 3 days back on a new win 10 free update.what can i do.lappie in pavillion 14b015dx

Read other answers
RELEVANCY SCORE 52

I am not sure if this is a Windows 7 problem but it seems to have occurred since I upgraded

Whenever I am speaking on Skype or listening to a video the speaker volume slowly decreases on the volume bar until it reaches zero. I have tried searching in control panel to make sure all the correct boxes are ticked but cannot resolve the problem. Any ideas guys.
 

A:Problem with speaker volume

Maybe you have checked this.
Control Panel - Sound Icon - Communictions Tab - Click - Do nothing - APPLY
 

Read other 2 answers
RELEVANCY SCORE 52

Hello

I can't seem to get a decent volume of of my speakers, i am using plug in speakers but i have to turn them of 3/4 capacity to get a decent sound.
I checked my speaker settings on my system and they are set ar 3/4 also, i checked with HP help desk and they told me not to turn up speaker settings pass half ? The speakers are Labtec and my computer is Compac Presario , Windows XP

Thank you

Dan
 

A:Solved: Speaker Volume

double click the speaker icon on the task bar -
is the WAVE button all the way up?
sometimes speaker volume (playback) is turned up but wave volume is too low
 

Read other 2 answers
RELEVANCY SCORE 52

I just connected my speakers.

I'm able to hear sound but it's very low (even when I turned the dial on the speaker clockwise to highest setting)

I haven't a clue what to do.

In CONTROL PANEL:
Sounds & Audio Devices tab -
I set speaker volume to highest setting - yet it still sounds low.
 

A:Solved: Speaker volume is very low

Read other 6 answers
RELEVANCY SCORE 52

Hello,

I have Parkinson's disease so I use voice recognition software.

The problem occurs when I want to edit my dictation and I want to play back my words. It seems there is a speaker buried deep in the computer. The volume on that speaker is so low as to be almost useless.

I would like either to adjust that volume or direct the audio through my normal speakers.

I'm ignorant of computer terminology so I may have viewed the settings but not recognized them.

Your guidance will certainly be appreciated.

Thank you
 

A:Volume on internal speaker

This probably should be in the hardware forum, but here goes.

I am guessing you do not have the speakers plugged in if you are not hearing anything through them. When you plug in the speakers it will usually stop using the internal speaker. You want to plug your speakers into a like colored port on the back of the PC coming out of your sound card. It will have lots of tiny holes in it like you would plug a headset into. If it is not the same color then it will probably show you an arrow pointing out from the center.
 

Read other 1 answers
RELEVANCY SCORE 51.6

I updated windows 8 to 8.1 and then to 10. Now during audio play, volume output of laptop speaker is less as compared earlier one. Laptop is equipped with DOLBY Advanced Audio. Please, rectify at the earliest.

Read other answers
RELEVANCY SCORE 51.6

Win7 Pro . Speaker volume icon on the lower right of the screen disappeared, now I need to go through the control panel to reset volume.
How to get that little thing back ? It was handy.

A:Speaker volume icon disappeared

From https://computertutorflorida.com/201...o-get-it-back/

Quote:




1. Right-click on the Taskbar (the bar at the bottom of the screen) and choose Properties.

2. Under the ?Taskbar? tab, look for the button that says ?Customize? and click it (this is to customize the notification area).

3. In the new window, look for ?Volume? under the list of icons. Out to the right, click the drop-down menu and choose ?Show icon and notifications?.

4. Click OK to close that window, then OK again to close the Properties window.

Read other 1 answers
RELEVANCY SCORE 51.6

Hi all,This might be a really basic, vista type question.Anyone know how to change the individual volume of the speakers in a 5.1 setup? In xp you can go into the properties of the speakers under sound, in the control panel, and change the volume levels of each speaker, which is handy as my rear speakers are on the floor so need a little boost. I can't seem to find this in W7 though - it just seems to lead to a 5.1 gui setup type wizard, but no individual volume levels? Cheers,

A:5.1 surround individual speaker volume

You left click on the speaker symbol in the taskbar.Then you click the speaker symbol above the volume-level bar.Then a menu with properties for the speaker opens.There you have to switch to the level tab and scroll down the bar.There are the volume options for the speakers.

Read other 6 answers
RELEVANCY SCORE 51.6

My wife has Windows 7 and the speaker is always set to maximum volume. (The computer makes a loud, shrill noise all the time.) Now, it can be muted and that is what she is doing now. In addition, the problem does not exist in Safe Mode. I have no idea what process is causing this. (Is the only way to go into safe mode and copy all of the processes and kill the remaining ones one-by-one in standard mode until I get the correct one?)

I had it fixed for a day when I restored the system to a state last week. However, after the last round of updates it started again. Does anybody else have this problem? I can't find any information anywhere. Does anybody know what is going on?

Thank You,

Andrew Stallard

A:Speaker & Microphone always set to maximum volume

Without the system information, at least the PC make and model number we can only offer general suggestions.

Not all drivers and applications are loaded in Safe Mode. It could be some program that is loaded when Windows starts that is setting the volume to maximum (look at what is in startup, such as Skype or any other media program).

Is the correct sound driver installed? or is only the generic, basic function Windows installed High Definition Audio Driver installed? If the High Definition is what is installed the first thing to do is install the correct sound driver.

Read other 1 answers
RELEVANCY SCORE 51.6

Hi,

First of all let me say that I really appreciate the fact that there are people out there willing to do this. I've spent hours trying to fix this problem this morning and am in desperate need of a solution that I haven't thought of trying.

My Computer specs:
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3838 Mb
Graphics Card: NVIDIA GeForce 9500M (GF 9400MG + GF 9200MGS), 256 Mb
Hard Drives: C: Total - 290205 MB, Free - 152242 MB;
Motherboard: Dell Inc., 0K183D, A07, .25L78K1.CN4864398T0532.

It's a laptop with integrated speakers. Randomly, the speakers stopped working. I've done the following:
- Run 32 bit diagnostics - everything is okay and the speakers work when used by that.
- Toggled the mute and the volume controls - still no sound.
- Checked to see if the sound card works by using headphones - the headphones work.
- Unchecked the box that allows programs to reduce sound in the speakers when in use.

Interestingly, if I bring up the volume mixer window from the system tray, I now get two tabs. One is for headphone volume and one is for speaker volume. There is no sound from the speakers, but if I repeatedly click on the headphone volume adjuster (which I did out of frustration once), it freezes and shuts down Volume Mixer, which temporarily allows me to hear sound.

I also recieved a Skype call while trying to fix ... Read more

A:Integrated Speaker / Volume Problems

Just did a system restore to try to get Windows back to the settings before my sound disappeared. The system restore completed but the sound is still missing.

Still looking for advice....
 

Read other 1 answers
RELEVANCY SCORE 51.6

Hi, I'm new to the forum and I suppose like a lot of forum newbees, I found this site and registered because I have a problem.

I'm getting a very very low volume out of the right channel/speaker. This issue started with a hard drive problem where my MBR and Partition Table was corrupted. I got a new hard drive, ghosted a saved winxp system partition image onto the drive and I was ready to go, except my right speaker volume was extremely low.

Some other info is that my left speaker had gone out a while back but the right continued to work fine. This was a definitely a speaker problem. After the hard drive problem that right speaker volume was very low even at max volume and it had been fine before. I was suspecting a driver issue, but my ghost image should have had the correct drivers.

I loaded the most recent Realtek AC'97 drivers, but no change. I had been wanting to get new speakers anyway so I bought some Logitech Z-10 speakers with both standard and USB connections. I thought that maybe my problem was the onboard integrated audio and my perception was that USB would bypass that integrated audio, so I thought maybe that if it was an integrated audio then the USB would work. Well no luck the left channels is great and the right channel sucks with both the USB and traditional plug, and I know the speakers are fine because they sound great connected to my laptop.

So back to the drawing board. I thought about getting a sound card, but if ... Read more

A:Audio Problem, very low volume in 1 speaker

Try doing an XP repair. You can find out how to do it here:

http://www.geekstogo.com/forum/How-to-repair-Windows-XP-t138.html

I don't trust Ghost images at all... Acronis Home is much more reliable. Good luck
 

Read other 1 answers
RELEVANCY SCORE 51.6

I have had some Tsunami SP-1100 speaks for a while, i normally run them on full volume on the speaker control box, and use my computer to adjust the sound as i need. Recently i hooked them to my CD player and tryed to use the speakers, but only 1 speaker was playing(the right). I had only just unplugged them from my PC and they were working fine, after a while or playing with it i noticed that the left speaker would only work when the control box volume was at 95-100%(MAX), anything lower and only the right speaker would work.

I have tried them with multiple PC's and sound devices and the speakers act the same way with everything.

What kind of problem can cause this? i havent banged them around or recently moved them at all when it happened.

Thank you for your help.

PS. sorry about the typo in the title.
 

A:Speaker only words on full Volume

Hi,

Most likely a bad solder joint between the amplifier and the actual speaker inside the box.

Another issue might be if there is a cross-over network inside the speaker box, one of the band pass filters may have died. Is there more than one speaker in the box?

Dave
 

Read other 1 answers
RELEVANCY SCORE 51.6

Does any have any idea why the volume control on Altec Lansing ada880 4.1 speaker system will not turn volume up..I turn it up and goes back to zero automatically..no matter how high I turn it..same with bass and treble control.everything else works..Reseting to default does not help..Thanks..
 

A:Ada880 speaker system volume

I think that's 5.1

If I understand right, you are saying that when you slide the volume bar up, it drops back to 0.

If that is the case see if you can select it with the mouse then use the arrow keys to adjust it.

And a permanent fix may be to try installing the latest drivers for your sound card.
 

Read other 1 answers