Over 1 million tech questions and answers.

Problem with wireless network adapter or acces network

Q: Problem with wireless network adapter or acces network

is there any solutions for this problem?
it's really bugging me
i already try to fix it by manage the device manager (network adapters)

RELEVANCY SCORE 200
Preferred Solution: Problem with wireless network adapter or acces network

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Problem with wireless network adapter or acces network

Hello razuke, Welcome to SevenForums : Can we get a bit more information to assist you ? Please do this : System Info - See Your System Specs . After updating your profile pls do this to enable us to have information to help you out : Basic Requirements Before Posting your Networking Thread . Thank you , we will try out best to assist you in this issue.

Read other 1 answers
RELEVANCY SCORE 85.6

Hi,

For several days my wireless connection has been connecting and disconnecting. Today I tried connecting to wireless and cannot actively see any wireless networks available. My wireless switch is on and is showing a blue light and Network Adapters in Device Manager show no warnings however when I run diagnose in Network Sharing Centre it tells me that Network Adapter "Wireless Networks Connection" is not connected.

The Wireless Router is fine and another laptop and iPad seem to have no problems connecting to it please could you advise?

I am running Windows Vista on a Vaio VGN FE41S

Many thanks,

J. Smith
 

A:Network Adapter "Wireless Network Connection" Problem for VGN FE41S

would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
Make sure you also indicate on the reply which tests are for what condition.
please include the xirrus screen shots for both conditions - see how below.

Please post back here the make and exact model of the router and if you have a separate modem, the make and exact model of the modem.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /al... Read more

Read other 1 answers
RELEVANCY SCORE 83.2

Mine is Dell Inspiron 3537, Os: Windows 7 Ultimate x64. My laptop wifi works fine for some period of time, but suddenly the current wireless connection gets disconnected and no wireless networks appear in the list. The network connection icon in taskbar changes to no network connection (small monitor with yellow exclamation icon). The wireless adapter is still enabled only.
Well i found a way to bring back the connection and to show the available wireless networks by disabling and enabling the dell wireless adapter under "change adapter settings" in Network and sharing center. But this problem keeps repeating at unpredictable intervals and i have to disable and enable the wireless adapter everytime!. Please help me with a solution.
I have already tried the following,
1. Re-installing,updating wireless network drivers.
2. Re-installing entire OS with full format of all hard drives.
3. Disabled (unchecked) "allow computer to turn off this device to save power" option under power management tab of dell wireless adapter properties.
4. Changed the power saving options for wireless adapter to "maximise perfomance" for both on battery and plugged in modes.
Having tried all these still no luck, the problem persists. I borrowed a digisol wireless USB adapter from my friend. this works fine all the time with no issues.
I have no idea why mine is not working properly. please do help.

Read other answers
RELEVANCY SCORE 83.2

Hi, i'm new here. I bought a LINKSYS Wireless G Router and a wireless G pci adapter for my two computers. I had already had everything up and working for about 6 months. Then, about 2 days ago i formatted my hard drive on the computer with the network adapter in it. After I got everything running properly and all my drivers and everything installed, i popped in the cd for the network adapter to set it up. Problem is, is that it won't load it. For like a split second a blue screen comes up then disapears. I tried manually starting it by going into the C drive and opening it from there, still won't load. I know nothing is wrong with my computer because every other cd i put in it works fine. I put this cd in my other computer and it wouldn't load on there either, did the same thing. I have a Dell and i had technical support help me format my computer and we went to install everything i needed. We tried to install the network adapter, but couldnt figure out why it wasnt loading. Dell told me the cd was bad. I called LINKSYS and they told me it was a bad CD too and i should go on their website and download the drivers. The guy was a little unclear and didn't seem to want to help me, and i did go on the site and downloaded the drivers. But to install them u need the cd, and i don't have that! So i'm right back where i started.

Can anyone help me on this one? Thanx.
 

A:Problem with wireless PCI network adapter CD

You can install Linksys adapter drivers without the CD. Go to their web site and pick your adapter.

http://www.linksys.com
 

Read other 2 answers
RELEVANCY SCORE 83.2

Hi there..

So I have recently bought a new wireless network adapter for my computer as having a long ethernet cable running around the house has become troublesome. I went to install it however when I put it into the computer windows will not detect the adapter. I have tried to install it through the software that comes with the adapter but that is unable to detect the adapter either. I have been able to install it on other computers but have had no luck with my pc.

The Adapter is:
TP-Link N600 Wireless Dual Band PCI Express Adapter

My PC specs are:
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 980 @ 3.33GHz, Intel64 Family 6 Model 44 Stepping 2
Processor Count: 12
RAM: 12279 Mb
Graphics Card: NVIDIA GeForce GTX 660 Ti, -2048 Mb
Hard Drives: C: Total - 121301 MB, Free - 67667 MB; D: Total - 953516 MB, Free - 574309 MB;
Motherboard: EVGA, EVGA X58 Classified 4-Way SLI
 

A:Wireless network adapter problem

Download the manual and go to P.57. Check the BIOS and ensure the PCI-e x1 slot is enabled, if you're using that for the card. If it is set properly, go to P.35. This will show you how to check the PCIe jumper to ensure the slot you're trying to use isn't disabled.
 

Read other 2 answers
RELEVANCY SCORE 83.2

plz delete this ! and replay in second one

A:Wireless network adapter problem

can you do a system restore prior to that update?

System Restore

-DG

Read other 1 answers
RELEVANCY SCORE 83.2

A friend of mine brought his IBM Think Pad T20 over because he just got this new Linksys Wireless Network Adapter and he cant get it to work. He installed the software for it and when he inserted the wireless card his whole computer froze up. As soon as he pulls it out, his computer works just fine. But every time he inserts it, it freezes. I went to the linksys website for tech support and the only option they have to help you with this perticular product is if you are actually on the computer with the card in. But as soon as he inserts it he cant do anything let alone get online.
Anybody have any idea's, please let me know.

Thanks A lot!

A:wireless network adapter problem

if there is another version of the wireless software for the adapter, try installing that software. i also recommend trying a spare wireless adapter. in some circumstances the adapter could be incompatible with the laptop. good luck

Read other 1 answers
RELEVANCY SCORE 83.2

Hi Guyz,

I dont know where to post this....but i am having a very big problem with my wireless adapter.

suddenly during working my connection got lost...i am able to connect thru ethernet.
In device manager..my device manager is showing an excalamation mark over the network adapter with error code as 'Device can not be started'
when i am uninstalling and resinstlaling the driver two drivers are coming
Intel pro wireless 39454BAG and Intel pro wireless 39454BAG-Miniport work scheduler..The second one when double clicked showing fine.
but the first onw is getting installed everytime.
Please help
 

Read other answers
RELEVANCY SCORE 83.2

I have a problem with wireless usb network adapter(Tenda W541U) and therefore I can not connect to the internet. In network and sharing center adapter is listed as disabled but when I try to enable it says "Enabling... then Enabled" but actually after that it is still listed as disabled. It is enabled in Device manager, I also reinstalled the drivers but problem is still there. I'm 100% sure that there is nothing wrong with wireless adapter, I tested it on another computer and it works perfectly. I suppose there is something corrupted in registry cause yesterday it worked and today when I turned on the computer it didn't work anymore. Operating system is Windows 7 x64 Ultimate.

A:Wireless network adapter problem

Maybe it needs a software to use. Does the device come with a software utility?

Read other 9 answers
RELEVANCY SCORE 83.2

Hi,

My internet had stopped working for some reason, so I decided to re-install the wireless network adapter, because it usually makes the internet work again.

So I deleted the wireless network adapter, and then I tried clicking "Scan for hardware changes", but the network adapter doesnt install. So its gone now, which is why internet just isnt working. How can I get it back?
 

A:Wireless network adapter problem

Hi,

If you can connect your computer to your router with the ethernet cable. That can get you on the internet.

Then with the name of your wireless adapter you can search for your wireless adapter driver.

What you could do before doing the above is to restart your computer again it should recognize that there is a hardware change and install the required driver itself or prompt you for the driver by stepping through a on screen instructions.

Follow the instruction for checking online.

See how you go with the above steps, and let us know.

Regards

Eamonn
 

Read other 2 answers
RELEVANCY SCORE 83.2

Hello. I'm having problems connecting my laptop to the internet. I don't know why it suddenly won't work. I'm using a wifi dongle and im using windows vista. Can someone please help me. Thank you so much in advanced!
 

Read other answers
RELEVANCY SCORE 82.8

Hi All

Please can anyone help??!! I have done something and I don't know what!

I have just bought a new computer, a compaq, running windows 7, AMD athlon (tm)IIx2 245 processor, I had no problems connecting it to the internet, it has a wired ethernet cable which plugged to my Thompson router and worked straight away. I also have a Toshiba satellite L350-170 laptop (running Vista) with wireless internet connection. At this stage I was getting internet on my new PC and wireless internet on the laptop.
The problem came when I tried to set up a home network, I have done it previously (on the old pc running Windows XP) with no problems, however I am not sure what I have done, but I can get internet on the PC but on the laptop it is connecting to the wireless network but not the internet.
In the network and sharing centre it shows the laptop connected to an Unidentified network but then there is a cross through the line connecting it to the internet. In Network and Internet, Network connections I double clicked on Wireless Network Connection and then on diagnose, I got a box with the heading - 'The network adapter "Wireless Network Connection" does not have a valid IP Configeration.

I am a bit bewildered what to do, and thought it better to seek help rather than fumble around in the dark!!
Hope someone can help

Thanks
 

A:Solved: Help network adapter 'wireless Network Connection' does not have a valid IP a

Read other 7 answers
RELEVANCY SCORE 82.8

I saw another post that had the exact same problem I'm having, just that my problem is on a desktop. We got wireless internet a few months ago and my desktop was working fine with it. Have a wireless adapter for the internet. Then a few weeks ago the internet started randomly disconnecting from only my computer. I thought it was a network problem. But then I hit something and the internet was working fine again for a few weeks. Now it's on the fritz again starting yesterday.

When I try disconnecting and then reconnecting to the network, it will tell me that there were no networks to connect to. And when I unplug the adapter and plug it back in to the usb ports, it'll tell me that my computer can't recognize the adapter, that it's malfunctioning. I've tried the adapter in all the ports and it gives me the same message. I have to restart my computer to get it to both recognize the adapter and the network so it'll connect again once it's restarted. The internet will last for random periods of time. When the internet goes out, I get the yellow triangle error thing first on the network icon, it doesn't just go right to there being nothing period and having the X symbol, only after I try disconnecting from the network. Sometimes all day then I'll leave the computer on over night and find the internet is out again on it in the morning. Or it'll last for only a few minutes. Sometimes the computer won't lose the network if ... Read more

A:Computer Losing Wireless Network Adapter and Network Recognition

Do other usb devices work fine on the computer? For instance, if you plug in a thumb drive the computer, is the computer able to recognize the drive as well as read/write data to it?
 

Read other 3 answers
RELEVANCY SCORE 82.8

Hi,

So recently I have removed a nasty zeroaccess rootkit virus(es) from my laptop. My Windows Firewall, Defender and Updates would not work (still won't), my browser kept redirecting to unrelated websites, and I was just overall having a TON of irritating issues. I installed MalwareBytes and Zone Alarm in addition to my Microsoft Security Essentials and restarted my computer once - everything seemed fine. I went to delete a few programs from my computer via the control panel, just unneeded things like Canon software I don't even use anymore. My computer told me I needed to restart so I did, and when it turned back on, I suddenly had no more Internet access.

It registers that my Internet providers are being picked up on (as in, it says Silver Moose is emitting a signal yet I have "limited access") and all other devices using the network in my home are working just fine. I tried troubleshooting and it says that there are problems with the wireless network adapter and the driver for wireless network connection adapter.

I've read that removing a 0access will render someone Internet-less but some people have overcome this. However, every thread I've already taken a look at don't exactly fit with my problems/computer model, so I wanted to stay on the safe side and get help fitted exactly to me. I have Windows 7 64 bit., a Gateway model NV78. I don't know if my processor/Intel(R) Core details are needed. If so, I'll gladly provide them.

I ran ipconfig /all and was ... Read more

A:Problems with wireless network adapter and network connection driver

First with this remove Zone alarm, while it use to be a great product, it cause more issues than it's worth these days.
Next, Start menu-> All Programs -> Accessories -> Right click on command prompt and run as Administrator.

Type in netsh winsock reset and reboot, see if the combination of these will help.

Otherwise, system restore is very simple to use and will only affect programs installed, not your personal files. If this doesn't solve the issue pick a time before the rootkit, a couple weeks if possible, and just restore it. You can scroll through all the date to make note of any changes that will be made. Make sure to re-install your AV and Malwarebytes afterwards to keep you protected.

Also, I do not work for Malwarebytes, but $29 for a lifetime license and an active protection module is absolutely worth it.

Read other 1 answers
RELEVANCY SCORE 82.8

I have quite a few laptops in my network. 2 Dell Insperion 1525, 1 Acer Esprima and a Fujutsi Siemens V5535 Esprimo Mobile. All is working perfect on the network and connect to internet, accept for the Fujutsu Siemens. The 3 other Labtops run on Viste Home Premium and the problem labtop runs with vista home Basic.

I tried everything, but still cannot connect to the internet with this laptop. I did activate network sharing, to see if that helps, but it is useless. Can sombody please help me.

The wireless router is a Belkin. Like I said, all the others on the network use axactly the same settings and work, without a problem. Is the problem maybe in the Bios setting or where can I look for the fault?

Cassie
 

A:Connected to wireless network with local acces

Read other 14 answers
RELEVANCY SCORE 82.4

For some time I've been running a home network of 2 PCs and a laptop using a wireless setup. All PCs are running XP Pro. The configuration was that one PC (call it A) was connected to the Internet via a USB Sagem ADSL modem and the others (B & C) connected wirelessly via that PC.

I'm now moving to a wired system using a NetGear router/modem. The router has attached to the Internet with no problem and both B and C machines work fine with it. However, machine A, that I used originally with the modem, won't connect.

So far I've removed old modem software and disabled/uninstalled the USB WAN adapter. I've checked the cable from the PC to the router and that's fine. I've reinstalled the ethernet driver. The PC tells me that the ethernet port is fine and working. The light on the router indicates the PC is connected. They just don't seem to be talking to each other.

I performed a scan on the network and it shows that the network adapter status as FAILED - by virtue of both the Ethernet connection and a "Instant Wireless USB Adapter" both coming up as FAILED. It seems to be that both are failing in looking at 196.168.0.1 - the default Internet IP address. However, I've removed (as far as I can see) the wireless device and any software reference to it. I'm guessing that there's some kind of contention going on but I can't see any way of removing the "Instant Wireless USB Adapter" in order to test o... Read more

A:Wireless to Wired - Network Adapter problem

Read other 6 answers
RELEVANCY SCORE 82.4

Alright, so I just got a Linksys Wireless-G Wireless adapter for my desktop and it installed fine but my wireless adapter said theres limited access to the network.Also, the network is unidentified. So, I ran a troubleshoot. It said Windows cannot connect to DLQD6 and "Wireless Network Connection" doesnt have a valid IP configuration. Please, help me out with this.

A:Problem with wireless adapter network connection.

I assume the router is connected to the modem and both modem and router are set to DHCP- Auto Config?

First try:

ipconfig /release
ipconfig /renew
ipconfig /flushdns

If not work, try do the same but connected directly to the router via ethernet.

Finally check in the MAC Address Clone tab, to see if the option is enabled.

Note: you access the router page via IE http://192.168.1.1

Read other 9 answers
RELEVANCY SCORE 82.4

Ever since updating to Windows 10 on Lenovo Edge 15 I've had network connection problems with Qualcomm Atheros QCA61x4.  I get timed out on websites, have to disconnect from network, reconnect, and restart--sometimes two/three times.  Can this be resolved (Comcast said I might have to replace the wireless card)? 

Read other answers
RELEVANCY SCORE 82.4

Hi there - my wireless adapter seems like its dead.

My laptop isn't detecting it and I cannot connect to wireless networks. The light to indicate if the wireless is on or not, is showing orange (off) instead of blue (on), when in fact the switch is in the 'on' position.

I've tried installing the broadcom driver again, but it didn't help. I'm just about to call up HP to have it serviced, unless anyone has any suggestions?

What really gets to me, is that my laptop is just about 1 and a 1/2 years old and this is the second time this exact same problem has occurred. Last time this happened, it was almost at the end of the warranty and I was able to have it repaired under the warranty. Now, I'm guessing I'll have to pay for the repair - the warranty is finished.
This second problem has occurred during a SHORTER time span - in about 4-5 months! Last time, HP's affiliates who repaired it, said the problem was the motherboard, so the motherboard was replaced (or was it just repaired?)

So I'm out of ideas. I don't even use the wireless much. Most of the time I'm connected to the internet via ethernet. What actually causes this problem?
Does anyone know how much having this repaired or having the wireless adapter or motherboard replaced would cost?

My laptop is a Compaq V3118au in case anyone's interested lol.

Sorry for my essay

Thanks for your help
 

A:Problem with broadcom wireless network adapter

i know this problem. first, try to update your BIOS. if this will helps so, the problem disappeared.
second problem connected with southbridge chip(mini-PCI-express is bus which connected directly to southbridge)
third. i recommend to sell this laptop. this platform has VERY BAD QUALITY of motherboard and has development errors(lack of northbridge and videochip heatsink). HP tried to fix this problem with new BIOS in which they changed passive thermal cooling temperature, but this is not right way.
and fourth try to replace the Wi-Fi adapter.
 

Read other 2 answers
RELEVANCY SCORE 82.4

Hi,
I am trying to use a Belkin Wireless G USB network adapter (version F5D7050) on a PC running Windows 7 64 bit. This adapter used to work fine, however, it suddenly stopped finding any networks. I tried to reinstall the software but it would no longer recognise the adapter. I bought a replacement adapter, however, when I try to install the software, I reach the screen that says "please plug in your usb adapter now" and when I do this nothing happens. I then get a message saying "notebook card not found. Please insert notebook card to continue". I have also tried downloading the latest driver and running this manually, but still no luck. Can anyone help me with this?

Thanks,
James
 

A:Belkin Wireless G USB network adapter problem

can we see a device manager screen shot - with at the devices attached

------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 82

Our internet service provider updated our internet speed from 100mbps to 1000mbps for no extra cost. We had a Netgear n150 wireless router but it wouldn't support the 1000mbps speed. We were told we needed to upgrade to a r6300 netgear router which is capable of 1000mbps. Now were are told we need to install an ethernet PCI network card or a network adapter. I am told we have to have a 2.0 port for the network adapter to work. It would be cheaper for us to install the internal Ethernet PCI Card, my problem is I don't know which one to buy. I know we need one that is rated 1000mbps, are these universal or will we have to buy one that fits each brand of computer?
 

A:Wireless Network Adapter or Ethernet PCI Network Card

Read other 13 answers
RELEVANCY SCORE 82

I have a Hp 2000 Notebook PC and it currently runs on Windows 7. When I go to my wireless network center it says that I'm connected to my wireless network but there is no internet access. Also when I try to open a page on Google Chrome I get an error message that says the webpage cannot be found because the DNS lookup failed. I have 2 laptops in my house my HP notebook and a Sony Vaio they're both connected to the same wireless network but my HP is the only laptop that gets No internet access. 

A:Notebook connected to Wireless Network but No Internet Acces...

Sounds like a DNS issue. Follow these steps to change from your default DNS to google's. Go the Control Panel.Click Network and Internet, then Network and Sharing Center, and click Change adapter settings.Select the connection for which you want to configure Google Public DNS. For example:To change the settings for an Ethernet connection, right-click Local Area Connection, and click Properties.To change the settings for a wireless connection, right-click Wireless Network Connection, and click Properties.If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Select the Networking tab. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and then click Properties.Click Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window.Click OK.Select Use the following DNS server addresses. If there are any IP addresses listed in the Preferred DNS server or Alternate DNS server, write them down for future reference.Replace those addresses with the IP addresses of the Google DNS servers:For IPv4: 8.8.8.8 and/or 8.8.4.4.For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844Restart the connection you selected in step 3.R... Read more

Read other 6 answers
RELEVANCY SCORE 82

Hello i'm to this forum,

Normally i try to solve computer problems myself, but after spending 3 days looking on forums and trying 'solutions' i finally give up and ask help on this forum.

For the last days my computere refuses to connect with my wireless internet.
I tried to find the problem with troubleshooting, but every time i finally manage to solve a problem a new one would arise. All the devices at my home can connect with the network except my computer.

My computer tries to connect with the wireless network. It says it is connected to the network but doesn't have internet acces, it also says it is a unidentified network. Troubleshooting found these 2 problems:
-problem with wireless adapter or access point
-wireless network connection doesn't have a valid ip configuration

Ipconfig shows that there is not a standardgateway (it's empty)
The things i tried are:
-uninstalling and reinstalling the networkaddaptor
-system restore to a date before i had problems with the internet connection
-ipconfig/release and then ipconfig/renew
-turning of all computers and the modem, and then starting up the modem and the computers one at a time
-netsh int ip reset resetlog.txt
and a few others that i cant remember anymore.

Any help would be appreciated.
 

A:dont have internet acces wireless network windows 7

Read other 11 answers
RELEVANCY SCORE 81.2

My internet was working fine and I was connected to wifi, then it suddenly stopped working.
I did all the troubleshoots and it discovered that there is a problem with the wireless network connection adapter. It shows that my wireless network is there and is on but won't connect to the adapter. I tried updating all the system updates, I tried restoring the system, nothing has fixed the problem! Help!!!

A:problem with driver adapter for wireless network connection

Can you please post a screen shot of the ipconfig/all from this machine?

Do you have McAfee installed on this system?

Read other 8 answers
RELEVANCY SCORE 81.2

I got a new wireless high performance adapter about a week ago from amazon and it detects my wireless network but does not connect to the internet. Sometimes it does connect to the Internet but rarely and some times it doesn't even show up in my wireless network.
 

A:Linksys Ae100 wireless network adapter problem

what windows version are you running - have you looked for a later driver from linksys
goto this page
http://homesupport.cisco.com/en-us/support/adapters/AE1000
download page
and you will see the drivers for XP, vista, windows7
 

Read other 1 answers
RELEVANCY SCORE 81.2

Hello guys, I have a Acer Aspire 3680-2576. My wireless internet does not work unless I have a USB thing plugged in so that I get wireless internet. In device manage -> Network adapters, theres Atheros AR5006X Wireless Network Adapter and it has a yellow circle with a black exclamation mark in it, and I goto properties it says under " Device status " This device cannot start. (Code 10).
I have done troubleshoot and it says to uninstall and re-install it and I have and it still does not work so trouble shoot has no use to me. The device is enabled but still does not work. My computer is suppose to be Windows Vista Basic but I made it Windows XP Professional just because I like it better than vista.

Can you tell me how to fix the problem so I don't need to plug in anything just turn the switch in the front so it works, please I really want it to work.

Thanks,
Poppy
 

A:Atheros AR5006X Wireless Network Adapter Problem

You will have to go back to the Acer website and see if there is an XP driver available for your laptop. If not, you will have to learn to live with the USB wireless adapter
 

Read other 8 answers
RELEVANCY SCORE 81.2

I upgraded this driver and now the device manager says that it can't load the drivers for this device. I need help thanks.

MusicalRabbi2k
 

A:problem with Atheros Ar9281 Wireless network adapter

I have a Toshiba Satelite A305-s6863
 

Read other 1 answers
RELEVANCY SCORE 81.2

Hello everyone. As you can see today when I got on my laptop I wasn't able to connect to the Internet and after attempting to troubleshoot I got this error message along with one saying a network cable is not properly plugged in or is broken. We recently switched Internet service providers and the Internet has been running fine. The only proble I had was sometimes it would randomly drop in speed but I don't think that has anything to do with the issue. Last night it was working perfectly, but then it went slow so I unplugged our router and then disabled the wireless network then reeanbled it. Anyways I've been using this network for a few months now without issues but I think the issue lies within my computer. I checked for windows updates and installed them but no luck. Then I checked for driver updates for my adapters but they were up to date. I don't have any screenshots and I'm on a tablet. Also please use the simplest terms possible because while I have a basic understanding of these things, I'm no expert and I don't want to miss anything. Also I have Nortan Antivirus and it hasn't given me any problems. Thanks.

A:Problem with the driver for the wireless network connection adapter

Bumping this thread. Somebody help?

Read other 1 answers
RELEVANCY SCORE 81.2

My wireless link stopped working. I have done the following: reset my modem and wireless router, and updated the wireless network adapter driver. The wireless switch is turned on, however, the LED is usually blue when it was working. Now it is amber - same color as the off position.

Is my internal adaptor fried or is there something I can do?

Thanks
 

A:Solved: Wireless network adapter (internal) problem

Read other 6 answers
RELEVANCY SCORE 81.2

Hey guys, I have just received an older PC, the low profile Dell Optiplex GX150. I freshly installed Windows XP with Service Pack 3, and installed my new Belkin N600 Wireless USB adapter. It appears to have installed correctly, however I am having trouble connecting to my network. When I search for available networks, my network is shown. When attempting to connect, the screen gets stuck on "Acquiring Network Address", and after a few minutes the window closes without connecting. My wireless network is encrypted with WPA Personal and "TKIP or AES", and these settings are correct under the network settings in Windows. I know this computer has networking capabilities, because I am currently sharing my Laptops wireless access with an ethernet cable via a workgroup. I am having no trouble whatsoever connecting via the cable (I am currently using PC with issue to type this). I'm sure the adapter is windows XP compatible because the Box the adapter came in states Windows XP with Service Pack 3 is compatible. I've tried a lot of advise from other posts on various forums and still nothing. Any help would be appreciated. Thanks in advance
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel Pentium III processor, x86 Family 6 Model 8 Stepping 10
Processor Count: 1
RAM: 253 Mb
Graphics Card: Intel(R) 82815 Graphics Controller (Microsoft Corporation), 32 Mb
Hard Drives... Read more

A:Problem connecting to wireless network via Belkin USB adapter

I have just received an older PC, the low profile Dell Optiplex GX150. I freshly installed Windows XP with Service Pack 3Click to expand...

What's the "service tag" number and/or "express service code" number on that Dell OptiPlex GX150?

-----------------------------------------------------

That Dell comes with an Intel Pentium III processor and supports a maximum of 512 MB(256 MB X 2) of PC133 RAM.

Yours has only 256 MB of RAM, so it's not going to run like a turtle. It's going to run like a snail or bog down.

It has only a 20 GB hard drive with an actual capacity of 19.12 GB, so it's not going to take it long to run out of free space.

That Dell is a "dinosaur" and isn't worth spending money on.

-----------------------------------------------------

Have you installed the driver software for that Belkin N600 USB wireless adapter?

-----------------------------------------------------
 

Read other 14 answers
RELEVANCY SCORE 80.4

Hi! First of all, I'm sorry if my English is bad. My laptop is running on Windows 8.1 Single Language. I just bought this about a month ago and I'm having this weird problem.

Cases that my network adapter connects to my computer:
1.) After restart
2.) When the network adapter successfully starts and then shut the computer down then start it again

Cases that my network adapter does not connect to my computer:
1.) Turning the computer on after a few hours from the last shutdown

I have done the following things:
1.) Update the driver
2.) Not allowing the computer to turn off the network adapter
3.) Uninstall and reinstall network adapter
4.) Release and renew IPv4 address
5.) Disable Proset services
6.) Disable Bluetooth driver and services
7.) Set WLAN AutoConfig to automatically start

Is this a hardware related problem or a driver problem? Do you know how to fix this?

Thanks!

A:Network Adapter problem - Intel(R) Dual Band Wireless-AC 7

Not enough information regarding which model of wireless adapter you have, what mfg & model of router/gateway. Download Speccy from piriform.com and post the URL it gives you after you run the tool.

Read other 13 answers
RELEVANCY SCORE 80.4

I have never come across such a waste notebook and terrible customer assistance. I bought this G50-70 Ideapad notebook owing to my previous good experience with ThinkPad notebook. but I never expected this is such worse. first and foremost my keypad has gone within 2 days. then DVD drive was stuck. thereafter back cover broken and detached. all I suffered and made all the fix with extra cost. after one year the HDD starts making the noise like those I PCs of the 1990s.now after upgrading to win 10 the trouble again increased. I have never connected to any wifi without keep trying trying trying for more than 15-20 minutes. if this network adapter is not compatible win 10 then why Lenovo allows upgradations to 10. I'm now in my office. very near to my router. the laptop shows all the wifi networks even in the coffee shop away. but not my nearby router. by fortune, if it shows and I try to connect it shows "can't connect to this network" well known and the adapter turns off for a while. what is happening to a well-known company like this? I have uninstalled the driver, reinstalled new from Lenovo site.still the same. the comedy is that Lenovo site provided intel drive for wifi for my laptop. when I extract and install it shows not compatible. nothing to do but I'm laughing, I wish to break away this notebook before any Lenovo shop. unfortunately, im not getting that also. Guys, if any of you come across this problem, please help me ... 








... Read more

Read other answers
RELEVANCY SCORE 80.4

I have never come across such a waste notebook and terrible customer assistance. I bought this G50-70 Ideapad notebook owing to my previous good experience with ThinkPad notebook. but I never expected this is such worse. first and foremost my keypad has gone within 2 days. then DVD drive was stuck. thereafter back cover broken and detached. all I suffered and made all the fix with extra cost. after one year the HDD starts making the noise like those I PCs of the 1990s.
now after upgrading to win 10 the trouble again increased. I have never connected to any wifi without keep trying trying trying for more than 15-20 minutes. if this network adapter is not compatible win 10 then why Lenovo allows upgradations to 10. I'm now in my office. very near to my router. the laptop shows all the wifi networks even in the coffee shop away. but not my nearby router. by fortune, if it shows and I try to connect it shows "can't connect to this network" well known and the adapter turns off for a while. what is happening to a well-known company like this? I have uninstalled the driver, reinstalled new from Lenovo site.still the same. the comedy is that Lenovo site provided intel drive for wifi for my laptop. when I extract and install it shows not compatible. nothing to do but I'm laughing, I wish to break away this notebook before any Lenovo shop. unfortunately, im not getting that also. Guys, if any of you come across this problem, please help me ... 
 
Mod's Edit: System model adde... Read more

Read other answers
RELEVANCY SCORE 80.4

So i just reinstalled my windows and i cant find a proper driver for my network adapter Airpace Wifi Abit.I read in a lot of forums that there isnt a driver for win7 64bit and it is using ATHEROS.I tried multiple times with Atheros drivers but it doesnt work.All the drivers which i downloaded are with .sys files and i have to put the driver manually when i go to device manager and to a network controller, but it doesnt find a driver even when i have downloaded it.
Any help guys?

A:Wireless Network Adapter Problem Airpace WiFi Abit

Hi Welcome to Seven Forums ... Read the Link below from an old Thread ...
Abit AirSpace Wi-Fi on x64

Read other 9 answers
RELEVANCY SCORE 79.6

I have an acer aspire 4530 using windows 7 and from a week ago Im having problems with the Atheros AR5B91 Wireles Network Adapter. It detects my network with an average signal, but when I try to connect, an error message is displayed saying that It was unable to connect. I tried almost everything: reinstalled the adapter, updated to the newest driver from: http://www.atheros.cz/atheros-wireless-download.php?chipset=28&system=5
I can connect to the network via ethernet cable; and also I have another laptop and it gets connected to the same network via wifi without problem. Im starting to think it could be a hardware issue, but it that were true I think the computer wouldnt detect the wireless adapter.
If someone could help me I would aprecciate it.
BTW: forgive my english.
 

A:Wifi connection problem with Atheros AR5B91 Wireless Network Adapter

First make sure you have the latest wireless driver from Acer's web site.
 

Read other 1 answers
RELEVANCY SCORE 79.6

I recently purchased an Xbox live for my son to use. We have two newer Dell computers on our network and sharing a cable connection. How do I add the Wireless G Linksys Game adapter? I put it to my son's computer in his room-hooked to his RJ-45 on his computer console. When I go back to my computer to set it up, it cannot be found. The main cable connection is on my computer as is the Linksys G woreless router. He already has an antenna-G device hooked to his computer to share the broadband. What am I doing wrong?
 

Read other answers
RELEVANCY SCORE 79.6

Hello,

Got a problem with my motherboard Asus M2N32-Deluxe SLI. Cannot install drivers for wireless network adapter driver (REALTEK RTL8187) on my Vista Home Premium 32bit.

Driver installation stucks durring the process and only solution is to kill its process, and when I want to repeat and install it again, im getting this error: http://img138.imageshack.us/img138/6517/123vf7.jpg

When I look at device manager I see there is a device Realtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter but with error that device is not configured properly. (btw why it says USB2.0? its build-in the mother board, how come its USB2.0)
Please help, I desperately need this Wifii AP.
 

A:Asus M2N32-Deluxe SLI - problem with wireless network adapter driver

Have you tried downloading the driver again?
 

Read other 3 answers
RELEVANCY SCORE 74.8

Hi,
I would really appreciate some help on this, I have looked EVERYWHERE, even these forums, and every topic i find has many ideas but none seem to work. Of course I will try them all again if needed and recommended.

Anyway here is what it is...

I have very inconsistent access to the internet through my main computer. I had added new computer to the network a long time ago and they both worked fine for a long time. When i added a third however this problem began, (Im not sure if that is the cause, becuase it hasnt even been connected to the network for the majority of the time ive had the problem, its been in a corner because of monitor issues)

Sometimes the internet works (not on main comp now) other tiems it doesnt, when it does it seems slower than it should.

I can't see any network places of other computers from main comp, and repairing the connection gives the problem, task can't be completed : clearing NetBT.

Other computer does not have this problem at all, and has reliable internet access, and can see network places.

I have tried alot of things, would be happy for help please.
EDIT: All comps on XP
Can't ping other machines.
Networked through router
Thanks in advance
 

A:Clearing NetBT, Network places internet acces, (one problem 3 issues I believe)

Is the router assigning IP's? You say you can't ping other machines, can you ping the router? If you can ping the router, and if the router is providing IP's, open a command prompt at each machine and type "ipconfig /release & ipconfig /flushdns & ipconfig /registerdns & ipconfig /renew".
 

Read other 2 answers
RELEVANCY SCORE 74.4

I'm not totally computer-literate when it comes to hardware and such, but I am fairly literate with most computer terms. So in advance, I apologize for any confusion a misused hardware name may cause.

Also, before I begin, let me just say that the issues hereafter discussed apply to a computer separate from this one. This computer works fine, but the one I will be talking about, my computer, is the one without an internet connection at the moment.

So recently, my network adapter decided to stop working. I won't go into the details, but it's completely fried, and I'd much rather spend the money to get a new one instead of go through the hassel of trying to fix my old one. And thus we come to question number one:

Do most (if not all) network adapter cards work with most PCs? I have a Dell Dimension 4500 with Windows XP Home edition with highspeed cable internet, so would pretty much any network adapter do the job? My stepdad, who is fairly computer-literate (though often too cocky about it) says that pretty much all network adapters will work with any computer, unless the computer and network adapter are old or new, respectively. Also, what are the most reliable brands of network adapters? What kind of details about the product should I look for when purchasing?

Now on to the second part of my post: wireless internet adapter. For a while, my computer has been a few feet from the router because we had/have no way for a cord to reach anywhere else, particu... Read more

A:Network Adapter/Wireless Adapter compatability

Read other 13 answers
RELEVANCY SCORE 73.6

hi all

sony vaio pc desktop pcvrs620 g, dell A940 all in one printer (wired to sony desktop) and a toshiba satellite laptop connnected through a wireless linksys router to the network...
all xp sp2

here's the trouble. we want to be able to share this printer, but right now cannot make the laptop print on the wired printer. of course it will print if i connect the usb cable, but i want to be ablet to print wirelessly.

have done "share this printer" on the wired pc
when i try to add the drivers /install the printer on the laptop it wants me to connect the laptop to the printer...i am not sure that i want to establish this connection since my ultimate goal is wireless printing...

ok? thanks!!

sorry, edited, i am posting this question in the more appropriate "networking" forum...
 

Read other answers
RELEVANCY SCORE 73.6

Hey guys, need some urgent help here.

I have a program on my computer called Intel(R) My WiFi Technology, which has something to do with my network adapter (Intel (R) WiFi Link 1000 BGN). I recently had an annoying notice popping up from this program saying 'The Wireless Network Adaptoor could not be found'. So I decided that I should find a solution on Intel's forums. I came across a thread that discussed my problem, and one of the Intel workers mentioned that Uninstalling and Reinstalling the program would be the best solution. So I followed the steps and came across a huge problem . Turns out that once I removed this program, my computer wouldn't connect to my wireless network in my house. I went onto my other devices throughout the home and they all seemed to be working fine, and that my router was still working fine aswell. I went onto my other computer and downloaded the program onto my USB, and installed it back onto my original computer. There still wasn't any difference, and my computer still currently can't connect to my wireless access point. I've rolled back drivers, updated them, and I've refreshed wireless network adapters in my Network and Sharing Center in Control Point. I'm starting to run out of ideas, and I really need some help. My computer can still detect networks though, but I've discovered it can connect to my Mobile Phone's Access Point, meaning I can connect to 3G through my phone. I'm sus... Read more

A:Uninstalled/Reinstalled Wireless Network Adapter - Can't connect to Wireless Router

Make sure you have the latest wireless driver from your laptop manufacturer's web site.

Delete all wireless profiles. Then try again to connect.

Please attach a screen shot of the Networks page of the Xirrus Wi-Fi Inspector and show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 73.6

I have been experiencing wireless wifi connection problems with my HP Pavilion dv6000 laptop. I am running xppro (I went from vista to xp pro..took a long time as I am slow) Anyway, I read that you can add another wireless network card as a work around, in the event that the internal wireless card breaks/dies.

I bought a BelkinWirelss G USB network adapter- F5D7050 and tried to install it on this laptop. I was able to install it on my IBM T23 and Gateway laptop. I had to disable the radio on the gateway before it worked. The IBM is old and has no built in wireless card. ON my HP pavilion dv6000, I slid the wireless button to disable and also went into device manager and disable there too.

For some reason after loading the Belkin in, it does not find any wireless networks. I called Belkin and spoke with their help desk but they were not helpful. My question, short of disabling my HP wireless card, do I have to remove the actual software (uninstall broadcom ) so the computer will look only at the belkin software?

My HP laptop, warrantied expired 2 months ago. Any help would be appreciated..
 

Read other answers
RELEVANCY SCORE 73.6

Hi. I have an IBM T40 Thinkpad laptop running Windows XP with CISCO Aironet Client Utility installed to manage my wireless networks. I don't understand the point of this utility as I find the Windows XP wireless connection management more reliable and straightforward, but I don't know how to disable this thing. I would if I could and I have tried, although not that hard.

Anyway, I was using the CISO Aironet Client Utility (or whatever it's called) fine, then I visited a friend's house and needed to get on his network. He started poking around and one day it was working and the next it was broken. It kept saying it couldn't find a radio signal or that it was off. I came home and it wasn't working for a month or so.

One day, I messed around with it and it started working again. Only problem now is whenever I shut down my laptop and re-open it, it never reconnects to my wireless connection automatically. I always have to do it by hand.

Any suggestions here? How can I get it to reconnect automatically and if I can't, how can I get it to use the Windows wireless features that are built in and bypass this CISCO stuff?

Thanks!
 

A:CISCO PCI Wireless LAN Adapter (Aironet) Won't Auto-Connect to Wireless Network

i'll move to netwroking you should get a better response
 

Read other 1 answers
RELEVANCY SCORE 73.2

Hi peeps, here's a seemingly unsolvable problem I have:

I want to network my two PCs (An Acer Vista Laptop and my old HP XP Desktop) so that I can play network games (Operation Flashpoint).

So I connect them both wirelessly to the router (a cheap SWEEX one). Now when Iook on my Vista Laptop's Network place I can see the Laptop I'm using the router (and can access it's page and everything) but I can't see my XP desktop from here. And when I go into the Desktop's network places I can't see the router or either of the computers I'm using.

And I assume that this network problem is why I can't see a server in my game.

Now I understand that file and printer sharing is turned, the firewall is definately turned off and I think the appropriate services are turned on (well to make sure I turned every single service on ) There must be some more complex reason why my XP hates to network!

Although I am by no means a noob to general computing I am reasonably new to networking. Can you clever lot help me?
 

A:Wireless Network problem: My XP won't show the router or other PC in Network Places

I am surprised that the old XP desktiop has wireless functionality. Did you add wireless to it, recently? If so, is it shown as operating correctly in Device Manager?
 

Read other 12 answers
RELEVANCY SCORE 73.2

Hi everyone: Iím having an extremely frustrating problem connecting to my Netgear DG384G v3 wireless router in my flat.

In short:

Ever since I reformatted my hard drive and reinstalled Windows XP Pro, internet browsers do not detect a connection to the internet despite a wireless connection being detected in the network connections (and the icon in the system tray) when my wireless adapter is plugged into my PC. Connection problems only occurred after the reformat, another PC in my flat connects wirelessly to our router with no problems (before, during & after the time I reformatted; Iím posting this using his PC) and the router config settings have definitely not been changed in any way so its not a router problem. It appears that the wireless adapter is able to detect a signal from the router but the router is not sending information to the adapter (I canít even connect to the router setup IP address 192.168.0.1)?

More detailed:

1) I wiped the PCís harddrive then reinstalled Windows XP Pro Ė I thought the recovery disk would have drivers with it (like others Iíd used) but it didnít so I had to manually find nVidia chipset & 3com Ethernet controller drivers and SP1 (for USB 2.0 functionality), download them on another PC and transfer and install them on mine. I got SP2, this didnít change anything, I changed back to SP1, still no change to connectivity.

2) When my Netgear WG111 v2 wireless adapter is plugged into a USB port, Windows recognises it as a d... Read more

A:Can't connect to net despite wireless adapter connecting to router's wireless network

Read other 16 answers