Over 1 million tech questions and answers.

BSOD Please help me to read my dump files

Q: BSOD Please help me to read my dump files

Hello everyone,

I am running Windows 7 Pro 32bit on HP and I have gotten many random BSOD's while being use on internet (play game online). I have updated lastest Windows , VGA, all driver from HP but still have BSOD. I can not read dump files. please help me

Thanks

RELEVANCY SCORE 200
Preferred Solution: BSOD Please help me to read my dump files

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Please help me to read my dump files

Only ran the 9 memory dumps from July - the one's from May (a total of 21) suggest the same thing.
The 9 from July are STOP 0x1 errors - Although I did see one STOP 0x119 (video driver) error in the May dumps along with several other errors blaming your ATI video drivers.

If you haven't done anything to fix the May errors (there were no errors in June), then please do the following:
- download the Display Driver only (NOT the entire Catalyst Control Center) from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD
- uninstall the current ATI stuff from your system
- install the Display Driver and monitor for further BSOD's.

Then, if the errors are still occurring, try running Driver Verifier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users



BSOD BUGCHECK SUMMARY
Code:

??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Thu Jul 15 07:26:14.086 2010 (UTC - 4:00)
System Uptime: 0 days 0:08:55.616
BugCheck 1, {82eb3590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Thu Jul 15 07:16:04.248 2010 (UTC - 4:00)
System Uptime: 0 days 0:06:53.777
BugCheck 1, {82eac590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Thu Jul 15 07:07:54.040 2010 (UTC - 4:00)
System Uptime: 0 days 0:11:35.570
BugCheck 1, {82e69590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Tue Jul 13 13:11:10.382 2010 (UTC - 4:00)
System Uptime: 0 days 0:13:22.911
BugCheck 1, {82ea2590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon Jul 12 01:30:00.956 2010 (UTC - 4:00)
System Uptime: 0 days 12:43:13.096
BugCheck 1, {82ea8590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Sun Jul 11 12:45:52.325 2010 (UTC - 4:00)
System Uptime: 0 days 0:03:06.839
BugCheck 1, {82e7d590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: stacsv.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Sun Jul 11 12:41:54.252 2010 (UTC - 4:00)
System Uptime: 0 days 0:28:16.782
BugCheck 1, {82e9e590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Sun Jul 11 12:12:36.198 2010 (UTC - 4:00)
System Uptime: 0 days 10:23:32.729
BugCheck 1, {82e77590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Sun Jul 11 01:48:09.999 2010 (UTC - 4:00)
System Uptime: 1 days 0:01:45.528
BugCheck 1, {82ea0590, 0, fffe, 0}
Probably caused by : ntkrnlmp.exe ( nt!NtQueryValueKey+0 )
BUGCHECK_STR: 0x1
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????

Read other 1 answers
RELEVANCY SCORE 79.6

I've been running out of ideas now, and windbg somehow doesn't make me open the .dmp files, so I'm desperately asking for help :( I don't know what's wrong with my computer with the tons of BSOD.

Here's the link with attached dump file:
https://drive.google.com/open?id=1kuRVG6KLZhXM3NTuzguDFFDdiyhzDj5S

Read other answers
RELEVANCY SCORE 79.6

Hello everyone,

I am running Windows 7 Utimate 64-bit and I have gotten many random BSOD's while being use on internet . I have opened the dump files. And all of them say that probable cause is: ntoskrnl.exe ( nt+71f00 ).

Attachment 53661

I have attached a .zip file with these dump files too.
I've passed the test of memory, no erreurs was dectected.

Any information very much appreciated.

A:BSOD Please help me to read my dump files

Please help me, many thanks to you.

Read other 9 answers
RELEVANCY SCORE 78.8

just got a new comp and final fantasy 14, put it in clicked english for my language and boom blue screen, didnt even get a chance to install and it happened 5 times after troubleshooting, i got system_service_exceeption for an error, finally found my dump files and zipped it with a system health report. please if anyone can decipher this THANKS IN ADVANCE

A:BSOD, someone read my dump files pleeease

Hi -

All 5 dumps had the same bugcheck -

0x3b (0xc0000005,,,) = system service threw an exception - 0xc0000005 = memory access violation. No probable cause named.

I found a loaded driver belonging to Symantec/ Norton -

Code:

SRTSPX64.SYS Wed Dec 02 00:58:24 2009 (4B160200)
Was there a trial offer on the new system for NIS, N360, other Norton product?

Run Norton Removal Tool - http://jcgriff2.com/NRT_N360_Removal.html

Is Webroot anti-virus only or an Internet Security app with a firewall? If firewall - remove Webroot; reboot upon comletion. Install MSE

Run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 18:13:56.334 2010 (GMT-4)
System Uptime: 0 days 0:15:30.551
Probably caused by : ntkrnlmp.exe ( nt!PspInsertProcess+40 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: explorer.exe
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`033800c0 fffff880`056f6620 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 17:43:09.841 2010 (GMT-4)
System Upt... Read more

Read other 4 answers
RELEVANCY SCORE 78.8

i get these Page fault error alot

installed 3 months ago exactly after i biut this PC Win 7 x64

Please look into these Minidumps

A:BSOD in almost every action that i do Please read these dump files

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system.

I prefer TotalMounter as my CD/DVD virtualization software as it allows me to burn images to a virtual CD/DVD if I just want an ISO file instead of a disc, and it is free.

Many use MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor as well, which is also free.
Crashes are pointing to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your... Read more

Read other 1 answers
RELEVANCY SCORE 78

I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs in email and other websites in Firefox, Chrome and Open... but not in IE for whatever reason. IE is ok. When troubleshooting, I attempted to read the dump files - but BSOD again. I do have the info when my computer reboots and I'm hoping someone can help me:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88007BBCC40
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:BSOD when trying to Upload Documents or Read Dump Files

Post it following the Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 78

I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs in email and other websites in Firefox, Chrome and Open... but not in IE for whatever reason. IE is ok. When troubleshooting, I attempted to read the dump files - but BSOD again. I do have the info when my computer reboots and I'm hoping someone can help me:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88007BBCC40
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
 

A:BSOD when trying to Upload Documents or Read Dump Files

Hello BookNerdGirl and Welcome to TSG!

Please go to C:\Windows and copy the minidump folder to the desktop. Compress it and upload it here. Click Go Advanced and scroll down to Manage Attachments to do this.
 

Read other 2 answers
RELEVANCY SCORE 78

Hi,

I get random BSOD a lot since updating from 8 to 8.1. I don't know how to interpret these files, but I followed the instructions to make a zip with the diagnostics tool. I've attached this file, anyone who could help me interpret what is going wrong would be greatly appreciated.

Thanks

A:BSOD dont know how to read dump files but have attached

Hi pinksock.

Your BSODs are all stop 0x109 and they are not showing any possible cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the CPU.
Hardware - Stress Test With Prime95

If those tests are free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a Syst... Read more

Read other 4 answers
RELEVANCY SCORE 66.4

Hey everyone so I've been having some issues lately with my laptop bluescreening randomly. I'm running Windows 7 Ultimate x64 and can't seem to figure out what exactly is the issue with my computer. I've run chkdsk and have found no bad sectors as well as ran memtest 86 for 5 passes on each stick and came back ok. Also ran sfc /scannow and it came back with no errors. When I do get a blue screen the error it says is something like IRQL_DRIVER or something along those lines...so maybe it's possibly a driver issue? All my drivers have been updated.

So I attached 4 dump files and was wondering if someone could read them for me and possibly point me in the right direction?

Thanks!

A:Can someone read my Dump files?

Hi,

Remove Zone Alarm.

Zone Alarm Removal tool -> http://download.zonealarm.com/bin/fr...cpes_clean.exe (run in Safe Mode without Networking)

Also - turn driver verifier on

Using Driver Verifier to identify issues with Drivers

Regards,
Reventon
BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 1 08:44:23.043 2010 (GMT+13)
System Uptime: 0 days 2:07:52.056
BugCheck D1, {ffffffff00000000, 2, 8, ffffffff00000000}
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
Bugcheck code 000000D1
Arguments ffffffff`00000000 00000000`00000002 00000000`00000008 ffffffff`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 1 06:35:50.015 2010 (GMT+13)
System Uptime: 0 days 0:15:46.028
BugCheck D1, {ffffffff00000000, 2, 8, ffffffff00000000}
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
Bugcheck code 000000D1
Arguments ffffffff`00000000 00000000`00000002 00000000`00000008 ffffffff`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 1 05:22:46.291 2010 (GMT+13)
System Uptime: 0 days 0:03:47.305
BugCheck ... Read more

Read other 8 answers
RELEVANCY SCORE 66.4

Hi guys,im getting alot of BSOD everyday and i want someone to read the dump files.i have attached in rar the latest dmp files.

I would really appreciate if someone helps me. Cheers

A:Dump files to read for me

Dump Files is (.zip) Format...

Read other 9 answers
RELEVANCY SCORE 66.4

My computer has been experiencing BSOD lately through out this month. I have attached some files with the dumps. Please help me figure out what was the cause of the BSODs. Thank you very much in advance.

A:Please help me read dump files

  
Quote: Originally Posted by monsteranh


My computer has been experiencing BSOD lately through out this month. I have attached some files with the dumps. Please help me figure out what was the cause of the BSODs. Thank you very much in advance.


Your video driver, re-install using this method.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper
Or Phyxion.net - Driver Sweeper

When it is removed then download and install the fresh copy.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Seven Forums\053111-26754-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02c1d000 PsLoadedModuleList = 0xfffff800`02e62650
Debug session time: Tue May 31 22:09:52.090 2011 (GMT-4)
System Uptime: 0 days 21:16:40.932
Loading Kernel Symbols
...............................................................
..................................... Read more

Read other 2 answers
RELEVANCY SCORE 66.4

My pc started getting bsod and i have no idea why. Thanks in advance.

A:Can anyone read my dump files?

so i guess i should try to fix it myself? oh well.

Read other 7 answers
RELEVANCY SCORE 66.4

All my dump files as well as others I've looked at in this forum, looks like hieroglyphics when I open them in Notepad, "PAGEDU64 `B x, p& P3$ d? ? ?? H X?? ??? ? Y ?? ? @? < <......"

What I'm doing wrong?
 

A:How to read dump files?

Download and use Bluescreenview...
 

Read other 2 answers
RELEVANCY SCORE 66

I've been having BSoD's for well over a year now, once or twice almost every day. I've tried multiple times to figure out whats wrong but... I dont have ANY dump files.

I've followed instructions on how to enable them but it still doesn't create a file. Im really hoping you all can help me out here.

The current settings are:
Page files on both hard drives enabled.
Set custom page size to 17000MB-20000MB
System managed size and no paging file boxes are unchecked
Write an event to system log box checked
Automatically restart unchecked
Debug information set to small memory dump/kernal. Both settings dont work
Overwrite existing file box is greyed out when debug is set to small memory. Checked when set to kernal
Small and kernal memory dump location set to C:\Windows\Minidump and C:\Windows\Memory.DMP I created these folders as they were not present

I got a SSD awhile back and use it for my windows. However i didnt reformat my other hard drive and windows is still installed on the old one however i boot from the SSD (maybe this is some how the problem)

Im using WhoCrashed from Resplendence Software - Advanced System Tools and Developer Components to force a BSoD when trying to creat a dump file.

There are NO files in either folder. Both on the SSD or old hard drive.

I've searched many forums now and found others with what seems to be the same problem but with no solutions. I would VERY much appreciate the help!
The BSoD's seem to mostly happen when play... Read more

A:No dump file after BSoD. Dump files ARE enabled

Wrote stuff that was wrong. Ignore this reply

Read other 9 answers
RELEVANCY SCORE 65.6

Please help, been having a problem for about a month now, thanks..

I cant run that Windows_NT6_BSOD_v3.03_jcgriff2_.exe file I downloaded from this site, so i hope the crash dump files will do. Thanks..

A:Crash dump (help me read the files)

   Information
Bugcheck 0xA0 - Usual Cause : Drivers, Sleep problems or Hardware (PSU Mainly)

Probably caused by : ntkrpamp.exe ( nt!PopAllocateIrp+a0 )

If you have any Overclocked Hardware then please return back to Default Clock speed

Run a full scan with your AV

Could you also tell me the Make/model of your PSU and If you added any Hardware then please remove.

For Reference:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Josh\AppData\Local\Temp\Temp1_crash dump files.zip\Mini060111-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6001.18063.x86fre.vistasp1_gdr.080425-1930
Machine Name:
Kernel base = 0x8244c000 PsLoadedModuleList = 0x82563c70
Debug session time: Wed Jun 1 01:40:06.236 2011 (UTC + 1:00)
System Uptime: 0 days 2:35:14.266
Loading Kernel Symbols
...............................................................
................................................................
............
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* ... Read more

Read other 19 answers
RELEVANCY SCORE 65.6

Hello!

I've done a forum search before opening a new topic, and the solutions I found in other topics are for reading BSOD minidumps, not application dump files, so for example BlueScreenView won't do me any good.

I have a 3rd party application that crashes frequently. The last time I created a dump file. After searching google for the better part of an hour on how to read dump files of applications specifically, I only came up with using dumpchk.exe for a solution, but the dump file is so large, I can not read the entire dump in the command line.

Is there a 3rd party application I can read entire dump files with?

Thanks in advance!

A:How do I read _application_ dump files?

The short version is you don't. Dump files are really only useful if you have access to the source code of the program they're for, so even if you could read them, it wouldn't help you much. Those dump files are intended for Microsoft's developers to be able to analyze what was going on at the time and determine if it had anything to do with Windows (or some other MS program). They're not intended for the average person, even the average developer.

Read other 7 answers
RELEVANCY SCORE 64.8

I've been having several regular BSOD(s) for the past two weeks. I suspect that my core is failing.

I reapplied some thermal paste and the temp is 20 degrees lower than it was running before I changed it. The voltage running through it seems to be normal.

I keep trying to pinpoint the exact errors, but my windbg keeps telling me I don't have the right symbols (even though they're configured to Microsoft's symbol server) to read WEA_ERROR_RECRODs.

Can someone with properly configured symbols paste the WEA error logs (!errrec)? That would really help me since I'm pretty much at a dead end since I can't get windbg to cooperate. Or is anyone able to help me pinpoint the exact trouble?'

I've already spent many hours:
memtest86 says my 4 sticks of memory are fine (ran from bootable CD)
western digital data scan says my hard drive is fine (ran from bootable CD)

Specs:
Vista 32-bit SP2
(Dell Inspiron 531)
AMD x64 5600

Periphs:
GTX 295
USB Mouse
USB Keyboard

Power Supply is Turbo Cool 860 ESA and is about 4 years old.

WinDBG not being cooperative:


Code:
Loading Dump File [C:\Users\Emily\Desktop\Kyle's Dumps\Mini082112-12.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: c:\Windows\Symbols
Executable search path is: C:\Windows\System32
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Pe... Read more

A:Can't read WHEA in my crash dump files. Help!

Still looking for anyone to take a look at the minidump files.

Read other 2 answers
RELEVANCY SCORE 64.8

Hello,
I am wanting to start reading my own dump files on Microsoft OS's (primarily 7 and 8) so I can figure out problems for myself. I have Windows Debugger (WinDbg) installed and have read a few guides but they are vague. There is still a whole lot I need to
learn. Any guides you guys can recommend? Maybe something a whole lot easier and more detailed or another debugger.
So far I have read these guides from MS ->

How to read the small memory dump file that is created by Windows if a crash occurs - https://support.microsoft.com/en-us/kb/315263
Crash dump analysis using the Windows debuggers (WinDbg) - https://msdn.microsoft.com/en-us/library/windows/hardware/ff539316?f=255&MSPPError=-2147217396
I don't understand symbols and haven't been able to get them to work and it mentions I386 folder but that isn't present in Windows 7 and 8. I wasn't able to get any of my minidumps to load.
Thanks

Read other answers
RELEVANCY SCORE 64.8

Blue screen continually can you please read these files thank you
 

A:Solved: Can someone please read my dump check files

Read other 11 answers
RELEVANCY SCORE 64.8

I have a workstation that has started crashing on the 17th.


It seems to go down 4-6 times per day. Previously it had only crashed 2 times in about 2 years. I asked the user if they had installed anything differently or if they had power issues and was told no.

I have never been great at trying to read dumps, so I am posting here to ask for help .
 

A:Random XP crashes. Can someone help me read the dump files?

First, the cause of your issue cited in all your minidump files is nvufmz.sys but the bad news is there is absolutely nothing on the internet concerning what appears to be a driver.

Second, it is preventing both your Symantec and your Broadcom wireless driver b57xp32.sysw from loading.

* I strongly suggest running your security software.
 

Read other 1 answers
RELEVANCY SCORE 64

Hi, I was trying to figure out what caused the Stop error I last encountered. I tried searching for any clues on Windows XP's mini dump, but I can't seem to find it. All I see are drivers loaded at that time, but the actual file I'm searching for, the file that caused the crash as indicated on the Stop error, is not there. It's actually Speedbit's Video Accelerator file, sbbotdi.sys. I have to find that out the hard way - waiting for the PC to trigger the stop error again. I saw people here asking for the minidump and replying with the exact file that caused the error. Thanks a lot

A:[SOLVED] How to read WinXP's Mini dump files

hello

just a suggestion if you haven't tried it yet but go to the home site of the company and inquire of them of the file and any related problems that might cause this

you might get the info you are lookin for there and reasons as why it is causing the error

for this sounds like it is an application error that is related to the program and not an issue of windows

i may be wrong !!!!

but the makers of the program should be able to answer your questions , if not check back you may find that you may have other advice waiting here

Mike

Read other 6 answers
RELEVANCY SCORE 63.6

Hi all
I get a BSOD whenever I attempt to enter sleep mode. The screen turns off, but the lights and fan don't, and eventually the computer just turns off. After rebooting it, I receive a "Windows has recovered from an unexpected shutdown" message. Using BlueScreenView I found out that the problem was caused by ntoskrnl.exe, but can't figure anything else out. I'd appreciate any help
Thanks for reading

Computer is running Windows 7 Home Premium x64 and is an HP Dv4t-1400

A:Read my BSOD Dump File?

Hi gullu101 and Welcome.

STOP 0x0000009F: DRIVER_POWER_STATE_FAILURE
Usual causes: Device driver

Your dump file blame Windows System files which is highly unlikely to be the cause.
Old and incompatible drives can and do cause issues with Windows 7.

As a Priority:

The sptd.sys driver is notorious for causing BSOD's with Windows 7. It's used by Daemon Tools /Alcohol 120 which will also have to be uninstalled.
Then use the correct (either 32bit or 64bit) download from Duplex Secure to uninstall the SPTD.SYS driver.
Make sure to select uninstall!
Virtual Drives
Some alternatives to DT/Alcohol that do not use SPTD.SYS (In no order).
DVDFab
MagicDisc
PowerISO (The program is a trial but the drive emulation is free forever).

Outdated Drivers. Update:

btwaudio.sys Tue May 13 05:10:36 2008
btwavdt.sys Tue May 13 05:09:36 2008
btwrchid.sys Tue May 13 05:10:53 2008 Broadcom Bluetooth

HpqKbFiltr.sys Wed Apr 29 14:48:30 2009 HP Quick Launch Buttons

ifsmount.sys Thu Aug 28 21:48:59 2008 Ext2fs File System Driver

NWADIenum.sys Tue Jun 03 00:25:53 2008 Novaltel NWADI Bus Enumerator

RimSerial_AMD64.sys Tue Jan 09 16:50:11 2007 Virtual Serial Port driver for Blackberry. If you can't update then uninstall software. It's obsolete.

Drivers with Updates:

GEARAspiWDM.sys Mon May 18 13:17:04 2009 Gear Software CD-ROM Class Filter Driver

Rt64win7.sys Wed Jun 23 10:10:45 2010 Realtek LAN RTL81xx 7.037

Bugcheck Analysis
Code:
Loading Dump File [C:\DUMPS\gullu101\020311-25287-... Read more

Read other 2 answers
RELEVANCY SCORE 63.6

I dont know how to analyze this crash dump file I attached. I got it with blue screen. I have clean install w7 RC7100 32 bit.

A:Can someone please read this BSOD dump file?

  
Quote: Originally Posted by name444


I dont know how to analyze this crash dump file I attached. I got it with blue screen. I have clean install w7 RC7100 32 bit.


Hi and welcome to SF

Im sorry that no one has responded but i do have a suggestion. Most ppl with BSOD expertise search the SF site for BSOD in the title.. You might have more response if you change the title to BSOD and told us a lot more info abt your system.. there is a section in your user CP just for that. Fill it in change the title and I know at least 2 users that will help you fix this

Hope this helps

Ken
Perhaps the first BSOD I had ever done. Such a noob I was.

Read other 3 answers
RELEVANCY SCORE 63.2

I am very consistently having my system lock up for no apparent reason, it freezes and then the screen goes black and I can't do anything. Sometimes I have to restart multiple times to get it back up and running again. I thought it was my Nvidia driver because one time I received a BSOD with the code nvlddmkm.sys, but after upgrading to the latest driver the issue still persists. I don't get a BSOD, just a complete system freeze.

I have attached the dump files and hope that someone much smarter than me can figure it out!

A:BSOD for no reason, can not read Dump file

Stop 0x116, that means a display/graphics related issue.

You are highly overclocked, which is the first thing to revert back to default in this situation.

Code:
CPUID: "Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz"
MaxSpeed: 2800
CurrentSpeed: 3372
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Report us for any further BSOD running in stock hardware settings.
______________________________________________

Code:
BugCheck 116, {fffffa8009db84e0, fffff8800f9aed1c, ffffffffc000009a, 4}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

Read other 1 answers
RELEVANCY SCORE 61.6

Windows Vista Home Premium:

1. How do you keep the bluescreen error frozen in order to record the information?

2. Is there a way to capture info regarding a bluescreen after-the-fact that is different from the dump file?

3. Where are the dump files saved and how do I read them?

4. Is there a seperate report file that displays what the bluescreen error displays or is that some component of a dump file?

Thanks.

A:Gerneral BSOD questions - How to read a bluescreen dump file, etc.

WhoCrashed is useful to have.

Read other 1 answers
RELEVANCY SCORE 57.6

Recently purchased the following laptop:

Acer Aspire 5542-5462

AMD Turion II M500 2.2ghz
4GB DDR2
500GB SATA
Windows7 Home Premium

Pulled it out of the box Friday, plugged in the power cord and started it up. Went through initial setup in ~30min. Loaded Win7 for first time and began setting things up. All of a sudden I get BSOD. I didn't notice what the first one was for but every time I restarted it'd run for a few minutes then BSOD, usually for a different reason every time. Called Acer tech and they had me do a full system restore from boot.......long story short it didn't help at all. I've since borrowed a know clean Win7 disc from a friend and completely reinstalled on fresh partition. It ran great for the first hour or so but reverted back to BSOD's every 5 min. BSOD seems to happen while doing some kind of activity like web browsing or file browsing. Hasn't happened with computer just sitting idle.

Approximate BSOD titles:

15% of time: irq not less or equal
25% of time: win32k.sys
60% of time: memory_management, or fltmgr.exe, others unnamed, or I didn't catch in time.

I attached a .zip of the memory dumps so far.

I appreciate any help on this. Hate to have to revert to Win7 32bit and only use 3gb of ram.

A:BSOD with dump files

Oh, add that I have used Window memory error check utility and let it make 2 full sweeps and it found no errors.

Read other 7 answers
RELEVANCY SCORE 57.6

I have been getting BSOD a few times with the error irqs not less or equal blue screen the past couple days. Any help would be appreciated!

A:BSOD With Dump Files

  
Quote: Originally Posted by lasthonor


I have been getting BSOD a few times with the error irqs not less or equal blue screen the past couple days. Any help would be appreciated!



These were caused by your network driver. The intel wifi driver needs to be re-installed with a fresh copy. Go to the mfr and download and install it.

Ken


Code:
BugCheck A, {0, 2, 0, fffff800031f7477}
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, 2, 0, fffff80002c0c477}
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, 2, 0, fffff800031e9477}
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 9F, {3, fffffa8004b04940, fffff80000b9c4d8, fffffa8005217a40}
Probably caused by : NETw5s64.sys

Read other 2 answers
RELEVANCY SCORE 57.6

Here is what I have. Lenova A63 Desktop with Windows 7 Pro 32bit, about 1 yr old. AMD Athlon II X2 processor, original OEM OS with no re-installs. Bluescreen comes up and goes away all by itself and then OS restarts. I know i don't have an antivirus installed as I just removed AVG today as I thought it was creating a seperate problem unrelated. Planning to re-install asap.
Thanks in advance
Shawn

A:BSOD dump files help

First off, I would just install microsoft security essentials to replace the loss of AVG, it's not the greatest thing but it is stable in win 7.

Give me a little time and I'll edit this post with the dump info.

edit: it seems the acronis disk filter driver is interfering with activity. I'm still running debug on the two most recent dump files though.


Code:
NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 001904fb
Arg2: 96a83788
Arg3: 96a83360
Arg4: 8b0fa20f

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for tdrpm273.sys
FAULTING_MODULE: 82051000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

EXCEPTION_RECORD: 96a83788 -- (.exr 0xffffffff96a83788)
ExceptionAddress: 8b0fa20f (Ntfs!TxfShutdownRm+0x000001e9)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 00000000
Parameter[1]: 326a8b04
Attempt to read from address 326a8b04

CONTEXT: 96a83360 -- (.cxr 0xffffffff96a83360)
eax=8b056820 ebx=00000000 ecx=8b0c1d4a edx=8fb041ec esi=8fb04000 edi=8fb04060
eip=8b0fa20f esp=96a83850 ebp=96a838d0 iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
Ntfs!TxfShutdownRm+0x1e9:
8b0fa20f a1048b6a32 mov eax,dword ptr ds:[... Read more

Read other 6 answers
RELEVANCY SCORE 57.6

Hello - If anyone could take 5 minutes to help me I'd really appreciate it.

I have attached the last 5 memory dumps - the blue screen info was as follows

SYSTEM_SERVICE_EXCEPTION

*** STOP: 0x0000003B (0x00000000C0000005) (0xFFFFF9600094 964)
(0xFFFFF8800A5A30B0) (0x000000000000)

*** win32k.sys - ADDRESS FFFFF96000094 964 base at FFFFF 96000020000

Datest amp 4d6f11c9

I've done the usual .. updated drivers (Driverscanner) ran malwarebytes, chk disk, spybot, defragged, checked registry (RegCure) etc but it crashed probably twice a day.

Thanks in advance if you can help. Dave
(ps - I'm a bit of a noob, so be gentle)

A:Another BSOD (with dump files)

also not sure if this might shed any light.

Read other 4 answers
RELEVANCY SCORE 57.6

ARGH!! Win7 sometimes makes me feel like such a NOOB! I've read and re-read every post in the How to. Unfortunately many of the writers are not referencing Win7. Links go to XP references. File locations sound more like XP than even Vista and certainly not Win7. Control panel references for enabling dumps do not correlate to any Win7 views.

I've run SF Diagnostic Tool v2.02 and it finds 0 files.

I have been having a number of hangs and BSOD's and need to go beyond the event logs to figure out the cause.

A:No BSOD dump files

Do you have a minidump folder... if not, create one... c:/windows/minidump

Read other 9 answers
RELEVANCY SCORE 57.6

I only have Windows 7 in my pc and without problems but since a few days ago, sometimes appears a BSOD that says:
Kernel_Data_Inpage_Error

Technical Information
***Stop: 0X0000007A (0XC05074E0, 0XC0000056, 0X6915EBE0, 0XA0E9C00)

Physical memory dump failed with status 0XC0000010

I know that the information which the dump file contain will help but i dont know where the dump file is located

A:BSOD - Dump Files

Many have simply reinstalled Vista when seeing the "Physical memory dump failed with status 0XC0000010" error repeatedly without any memory dumps being seen. Your next step would be looking in the event viewer logs which can sometimes point to a company name.

For the "Stop: 0X0000007A" error the MS information on that goes back as far as Windows 2000.

"This issue can occur if you have the UlraDMA66/ATA66 (80 wire/40 pin) IDE cable attached to the drive that you are trying to install Windows 2000 on. Windows 2000 does not fully support the UltraDMA66 controller."
Error Message &#34;Stop 0x0000007A&#34; Occurs During Setup on an ATA66-based Computer

An updated version of the same problem seen with Windows Server 2008 and Vista is found at Stop error message when you put a computer that is running Windows Vista or Windows Server 2008 into hibernation&#58; &#34;STOP 0x000000A0,&#34; &#34;STOP 0x0000007a,&#34; or &#34;STOP 0x00000077&#34;

You'll find a link for a hotfix at the top of the page there that might help with 7. But still look the event viewer logs over to see what other information is shown there.

Read other 9 answers
RELEVANCY SCORE 57.6

here is a link of the archived minidump folder (i tried attached but it said invalid file)
storage.to - Download
i get this bsod's at random i could say..could any of you guys help me figure out what the problem is?

i have the x64-bit version of win7..on a laptop msi gx623

A:bsod dump files

  
Quote: Originally Posted by gigimasinuta


here is a link of the archived minidump folder (i tried attached but it said invalid file)
storage.to - Download
i get this bsod's at random i could say..could any of you guys help me figure out what the problem is?

i have the x64-bit version of win7..on a laptop msi gx623


Please ZIP up the minidump folder contents and upload the zip archive here. That other site makes it hard work to get to your RAR.

Read other 9 answers
RELEVANCY SCORE 57.6

hello,
i get bsod's all the time, ive added the dump files.
please help me.

A:need help with bsod and dump files

Hello,
Start by updating these 3 old drivers,





Quote:
lmimirr.sys Wed Apr 11 10:32:45 2007
RemotelyAnywhere/Logmein Hamachi

LMIRfsDriver.sys Tue Jul 15 04:26:56 2008
See Above

RaInfo.sys Sat Jan 05 07:57:14 2008
See Above


Regards...

On your next post, PLEASE post your system specs.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {21, fffff8a003215000, 2770, 8a19582fc3acb9de}

Unable to load image \SystemRoot\system32\drivers\spsys.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for spsys.sys
*** ERROR: Module load completed but symbols could not be loaded for spsys.sys
Probably caused by : spsys.sys ( spsys+28d50 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************... Read more

Read other 3 answers
RELEVANCY SCORE 57.6

Hi there,

I have been getting random BSOD particularly when playing videos. I have tried updating videocard drivers but this has not solved the problem.

I have windows 7 x86 (32bit) Full retail, (upgraded from windows xp) installed a few months ago.The system is 4 years old.

Any help much appreciated.

Thanks

Simon

A:BSOD and dump files

Welcome to SF, coolsi.

First please update your System Specs.

HOW TO FILL OUT YOUR SYSTEM SPECS

In the line at the top of “www.SevenForums.com” you will see UserCP.
That is an abbreviation for User Control Panel.
Click on UserCP.
In the left-hand column, under Your Profile you will see Edit System Spec.
Click on Edit System Spec
You can copy and paste from the output of Speccy, http://www.piriform/com/speccy to fill out much of the info. Be sure to use the Other Info section of your System Specs for such info as your optical drive, your wireless adapter, your speakers, etc.


Your NVidia NForce Network Controller is old. Please update.
Driver c:\windows\system32\drivers\nvm62x32.sys (1.0.1.210, 339.13 KB (347,264 bytes), 10/06/2009 22:18)

I'm looking at the log now for further information.

** EDIT **

Memory corruption was also reported. After completing the steps above,

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Read other 2 answers
RELEVANCY SCORE 56.8

I am having constant BSOD Occurrences. I am attaching the mini dump files from the crashes. If you could help me figure out what is causing these I would appreciate it. I have also attached my system info.



Thanks,

JPerrin

A:Need Help With BSOD, and Mini Dump Files

Code:
fffff880`0a122610 fffff880`04d8e748Unable to load image BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
BHDrvx64+0x14f748
What is bhdrvx64.sys ? | System Explorer

Code:
fffff880`0a122870 fffff880`043aff00Unable to load image SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0x26f00
What is symevent64x86.sys ? | System Explorer

Uninstall Norton and all Symentec products using Norton Removal tool. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know the result.

Read other 1 answers
RELEVANCY SCORE 56.8

Hey can someone please help me and analize this dump files?
Win 8 X64
I have recently recovery my pc to factory settings, and now it take too long for start and show the an error that caused my pc to restart and if i want to send my dump files to Microsoft..

minidump.zip

Read other answers
RELEVANCY SCORE 56.8

When starting up windows 7 and getting to the part to enter my password to login I receive the BSOD. I restarted my computer in Safe Mode then restarted and it worked fine.

This is a brand new computer, bought from cyberpowerpc I have been using it for about 3 days.

A:BSOD on loggin have dump files

You need to update the Bigfoot Ethernet driver
Find an update for the Killer Xeno Gaming Adapter driver or remove the device
Support

These two drivers are obsolete

Read other 1 answers
RELEVANCY SCORE 56.8

? OS - Windows 7
? x64 ?
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) about 2 months
? Age of OS installation - have you re-installed the OS? OS from old computer several years old

? CPU AMD FX 8350 (4ghz)
? Video Card AMD Radeon R9 280x (XFX)
? MotherBoard Asus
? Power Supply - 630W (unsure of brand)

? System Manufacturer - Home build
? Exact model number

Laptop or Desktop? Desktop

A:bsod memory dump files

Hi,

We have two bug checks:

KMODE_EXCEPTION_NOT_HANDLED (1e)

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

BugCheck 1E, {ffffffffc0000005, fffff80004706622, 0, ffffffffffffffff}


Code:

6: kd> ln fffff80004706622
(fffff800`04706610) nt!KxWaitForLockOwnerShip+0x12 | (fffff800`04706660) nt!KxWaitForLockChainValid
The exception occurred in nt!KxWaitForLockOwnerShip.
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)

This indicates that a system thread generated an exception which the error handler did not catch.

BugCheck 1000007E, {ffffffffc0000005, fffff800046a6622, fffff880009a9758, fffff880009a8fb0}

The 1st parameter of the bug check is 0xc0000005 which indicates an access violation occurred.


Code:

6: kd> .exr 0xfffff880009a9758
ExceptionAddress: fffff800046a6622 (nt!KxWaitForLockOwnerShip+0x0000000000000012)
ExceptionCode: c0000005 (Access violation)
The violation occurred in nt!KxWaitForLockOwnerShip.

-------------------

1. AODDriver2.sys is listed and loaded in your modules list which is AMD Overdrive; also in EasyTune6 for Gigabyte motherboard. Known BSOD issues in Win7 & 8.

Please uninstall either software ASAP! If you cannot find either software to uninstall, or it's not installed, please navigate to the following filepath:

C:\Program Files\ATI Technologies\ATI.ACE\Fuel\amd64\AODDriver2.sys

and rename AODDriver2.sys to AODDriver.2old
... Read more

Read other 10 answers
RELEVANCY SCORE 56.8

Hello.

As I already mentioned in the title i had a BSOD. It was the first time after I formatted my Win 7 professional x64 about a month ago so maybe somekind of driver issues but i wouldn?t know.

basic specs can be found by checkin my forum account and im glad to give any extra information.

Thanks for any help you can offer.

Martin

A:BSOD while using VLC (dump files added)

Dump file points to netw5v64.sys as the possible problem. Try updating the drivers for your network card.

http://downloadcenter.intel.com/Default.aspx?lang=eng

If the problem still persists, check your ram using memtest. My pc crashed when I was using VLC once and it was because my ram was faulty.

Memtest86+ - Advanced Memory Diagnostic Tool

Read other 4 answers
RELEVANCY SCORE 56.8

I've got absolutely no clue what is going on with my computer. I've gotten these 2 kinds of blue screens. Sometimes it will even restart without me seeing a BSoD.

Computer Specs:

OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00 GHz, Intel64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3071 Mb
Graphics Card: Nvidia GeForce 8800 GS, 384 mb
Hard Drives: C: Total - 305234 MB, Free - 185931 MB;
Motherboard: MICRO-STAR INTERNATIONAL CO.,LTD, MS-7514
AntiVirus: None

(I only JUST uninstalled AVG because I had read it can cause problems with what I'm having.. obviously didn't fix it.)

I can't even get into the forums long enough to get the information written down before it crashes so I got pictures of the Bluescreenviewer information using my phone.

Latest BSoD:

One I was getting a little while ago before the IRQL_NOT_LESS_OR_EQUAL one:


I only know of one thing that could possibly cause this and that is I used to have 4 GB of ram and one of the cards doesn't work and crashes my computer, so I took it out. This was a long time ago and I fixed it. But only recently these problems have started, and I haven't downloaded anything besides an update to my anti-virus which I uninstalled and the drivers for my network card.

Any tips?
UPDATE: I ran a memory test overnight and it ran 12 times. No errors whatsoever.
 

Read other answers
RELEVANCY SCORE 56.8

Hi. I'm experiencing BSOD problem for quite a long time. I really don't know anymore what could be the cause of this problem and i desperately need help about it. I don't know much about this, but I've been told to upload memory dump file so that experts may determent what is the cause of my problem. But that is where another problem is. I'm not getting any new memory dump files after my PC crashes. It just stopped ''appearing''. I did everything this site suggested to enable mini dumps:


Set MiniDump


What should i do? Please help me. (I have SF files attached, take a look i hope that helps...)

A:No memory dump files after BSOD

Code:
The following boot-start or system-start driver(s) failed to load:
AFD
Avgdiska
AVGIDSDriver
Avgldx64
Avgtdia
CSC
DfsC
discache
NetBIOS
NetBT
nsiproxy
Psched
rdbss
spldr
tdx
Wanarpv6
WfpLwf
Uninstall AVG using AVG Remover. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
And test you HDD using HGST WinDFT. Let us know the result.

Now let us know if the BSODs are continuing or not. If it continues, take a camera snap of the BSOD screen and upload it here.

Read other 7 answers
RELEVANCY SCORE 56.8

Hello guys, I am having issue with my computer lately. tried to look for an answer of why my pc keep crashing with stop error 0x00000024 hope someone could help me understand what cause this issue.
 

A:BSOD need help with understanding the dump files

Your logs show a problem with DeepFrz.sys. It is a driver for Deep Freeze software. You could re-install, un-install, or upgrade it; or check with the manufacturer (Faronics) to see if the have a solution.
 

Read other 2 answers
RELEVANCY SCORE 56.8

Hey guys,
I have a problem with my computer. I have it just for like a month or so and I already had several BSODs (actually 8 of them). They all happened in 2 situations. First during rendering in 3D Studio Max and second during playing Starcraft 2. Rendering might be even problem of 3Dstudio so I'm going to pay attention to those happened while playing.
Problem is that first two happened longer time ago and I didn't payed to much attention to them, because I thought they were random crashes. But today they started to happen after around one hour of playing. I had three of them today in during few hours.
The thing is that everytime it's different kind of BSOD and different driver causing it. I tried to look into the .dmp files and I was able to get the drivers from them.
First was:
bug check code - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
caused by driver - dxgmms1.sys

Second:
bug check code - KMODE_EXCEPTION_NOT_HANDLED
caused by driver - Wdf01000.sys

Third:
bug check code - DRIVER_IRQL_NOT_LESS_OR_EQUAL
caused by driver - Ntfs.sys

I tried to google a lot but I don't really know what to look for because everytime it's different error.

First I thought it may be overheating but temperature of processor seems fine (below 50?C)

My configuration is:
OS: Windows 7 Proffesional x64
OS Version: 6.1.7600.2.0.0.256.48

processor: Intel? Core™ i7-930 (8MB cache,2.80 GHz, 4.80 GT/s) LGA 1366
graphics: ATI Radeon HD 5850 1GB Vapor-X DDR5, HDMI... Read more

A:BSOD problem - dump files

  
Quote: Originally Posted by klayman


Hey guys,
I have a problem with my computer. I have it just for like a month or so and I already had several BSODs (actually 8 of them). They all happened in 2 situations. First during rendering in 3D Studio Max and second during playing Starcraft 2. Rendering might be even problem of 3Dstudio so I'm going to pay attention to those happened while playing.
Problem is that first two happened longer time ago and I didn't payed to much attention to them, because I thought they were random crashes. But today they started to happen after around one hour of playing. I had three of them today in during few hours.
The thing is that everytime it's different kind of BSOD and different driver causing it. I tried to look into the .dmp files and I was able to get the drivers from them.
First was:
bug check code - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
caused by driver - dxgmms1.sys

Second:
bug check code - KMODE_EXCEPTION_NOT_HANDLED
caused by driver - Wdf01000.sys

Third:
bug check code - DRIVER_IRQL_NOT_LESS_OR_EQUAL
caused by driver - Ntfs.sys

I tried to google a lot but I don't really know what to look for because everytime it's different error.

First I thought it may be overheating but temperature of processor seems fine (below 50?C)

My configuration is:
OS: Windows 7 Proffesional x64
OS Version: 6.1.7600.2.0.0.256.48

processor: Intel? Core? i7-930 (8MB cache,2.80 GHz, 4.80 GT/s) LGA 1366
graphi... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

Hello,

I started noticing that my newly built computer suddenly restarts without warning and offers no BSOD. I built it about 3 weeks ago, and originally it did not have this problem. I Googled a solution for no BSOD, and they suggested to do this:





Quote:
Right Click My Computer -> Properties -> Advanced System Settings -> Advanced Tab -> Under Startup and Recovery click Settings -> untick the box for automatic restart


I haven't turned my computer on in fear of something really breaking, but I was able to get all of the dump files per this post: Dump Files - Upload to SevenForums
(I tried to download WinDdg, but the installer from Microsoft kept failing out on my good computer).

I was going to run the dm log collector as it says in the BSOD rules on posting, but I'd rather not take a chance with my newly built computer. I can do that, but I want to minimze the risk (I really can't afford a new build). Attached are the dump files in .zip format.

Specs:

Code:
--Custom Build
--Windows 7 Professional 64-bit
--AMD FX-6300 3.5GHz 6-Core Processor
--Gigabyte GA-78LMT-USB3 Micro ATX AM3+ Motherboard
--Kingston 8GB (2 x 4GB) DDR3-1333 Memory
--Asus Radeon R7 260X 2GB Video Card
--Old (but Healthy according to SMART data) Samsung 250 GB Drive
--Corsair CSM 650W 80+ Gold Certified Semi-Modular ATX
--NZXT Sentry Mix 2 Fan Controller
--Gear Head USB 2.0 4-Port Hub with Energy Saving Switch
--Avast! Free Antivirus

A:Immediate restart w/ dump files but no BSOD

I had to use my computer last night, no problems for awhile. I start playing some n64 games on it for a few hours hours, seems good, then it randomly restarts again with no blue screen. The checkbox to "automatically restart after errors" was unchecked as I did that earlier, so I'm surprised why there wasn't a blue screen. I have another dump file from it as well.

Can anyone read these dump files for me please??

Read other 9 answers
RELEVANCY SCORE 56.8

from past 1 month this bsod has started again.. don't know why..
plz help

A:BSOD....dump files attached

Pretty simple, AVG appears to be causing it. Please remove it with this tool: http://download.avg.com/filedir/util...avgremover.exe

Install MSE instead (also free): http://www.microsoft.com/security_essentials


...Summary of the Dumps:
Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 00:09:25.956 2010 (UTC - 4:00)
System Uptime: 0 days 1:00:17.063
BUGCHECK_STR: 0x4E_99
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Aug 15 23:21:45.877 2010 (UTC - 4:00)
System Uptime: 0 days 0:07:37.984
BUGCHECK_STR: 0x1a_3452
PROCESS_NAME: avgcsrvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Aug 12 02:32:54.531 2010 (UTC - 4:00)
System Uptime: 0 days 1:05:40.638
BUGCHECK_STR: 0x1a_61940
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon Aug 9 02:53:02.422 2010 (UTC - 4:00)
System Uptime: 0 days 4:03:04.530
BugCheck A, {c0019078, 0, 0, 828c561e}
Probably caused by : memory_corruption ( nt!MiEmptyWorkingSet+16f )
BUGCHECK_STR: 0xA
PROCESS_NAME: avgchsvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: ... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

BSOD errors. I would appreciate assistance analyzing these dump files for a solution. This is the BSOD message....

BCCode 1000008e BCP1:C0000005 BCP2:806E694F BCP3:A9B9EB8
BCP4:00000000 OSver:5_1_2600 SP3_0 Product:256_1

I'm not being permitted to attach files to this post but can email to anyone willing to take a look at them.

A:[SOLVED] BSOD Dump Files

Hi rerun1 and welcome to TSF

I think I remember an issue dealing with file extension that prevents a file from being attached to a post. Try ziping the dump files and see if a .zip extension will attach.
If that works, I'll make it a mission of mine to be more profound next time I tell someone
I'm not good at decyphering dump files, but others on this forum are. I usually look at errors in the events viewer to determine course of action. A double click on an error there will give more details about the error.

Hope this helps
Mack1

Read other 3 answers