Over 1 million tech questions and answers.

SFC scan/ SFCFix files corrupt

Q: SFC scan/ SFCFix files corrupt

Hi

I have a
Win 7 home 64bit SP 1 ( NO Install dis)

My pc has been slowing down and sometimes crashing
I have ran the following ...

A variety of virus and malware scans (clean)
The CHKDSK from the windows command prompt ( no bad sectors)
SFC & SFCfix scans ( at least 4 or five) a lot of errors were
System Update Readiness Tool 2 times
I still have 2 corrupt files ( I do not have install disk)
Here are the recent logs
I would really appreciate any help without having to do a reinstall if possible

Read other answers
RELEVANCY SCORE 200
Preferred Solution: SFC scan/ SFCFix files corrupt

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 108

Hi I ran both scans and need some help on what to do next to fix files if that is even possible
I can attach logs if you let me know which ones and how to get them. Im sorry if this is the wrong place for this issue. Thank you

Read other answers
RELEVANCY SCORE 68

hello I have run a sfc scan and it showed I had corrupted files upon research I cam accross the sfcfix.exe which had also failed. Please help if you can Thanks

A:corrupted SFC scan and failed sfcfix.exe

Hello Macari and welcome to Seven Forums.

It's been reported that several Windows Updates starting in May 2015 have caused people to experience corrupted system files after running sfc /scannow.

I'd try uninstalling all updates from May and June. Then try running the sfc again. If it works (no integrity violations found) then you'll know one or more of the Updates was responsible for the corrupted files. You could try reinstalling just a few at a time and run sfc after each group. If sfc runs successfully install the next group. If the sfc shows corrupted system files after running the scan you'll know which Update(s) were at fault. Uninstall those few updates, and install just one at a time. Run the sfc after each install until you know for sure which Update(s) is causing the issue.

Windows Update - Uninstall an Update

Hopefully other Forum members will jump in with other suggestions.

Read other 9 answers
RELEVANCY SCORE 63.2

I have corrupt file(s) in cbs.log and don't know how to fix. I've Ben struggling for weeks. I cannot download SP1 which is required to upgrade my computer to Wndows7. Please help!!!!

A:Sfc scan now going corrupt files

Go to this Microsoft Support article dealing with using the System File Checker tool to repair missing or corrupted files.  If you get that cleared up, then you shouldn't have a problem doing an Update to Vista Sp1.

Read other 9 answers
RELEVANCY SCORE 63.2

I have corrupt file(s) in cbs.log and don't know how to fix. I've Ben struggling for weeks. I cannot download SP1 which is required to upgrade my computer to Wndows7. Please help!!!!

A:Sfc scan now going corrupt files

Go to this Microsoft Support article dealing with using the System File Checker tool to repair missing or corrupted files.  If you get that cleared up, then you shouldn't have a problem doing an Update to Vista Sp1.

Read other 13 answers
RELEVANCY SCORE 63.2

I ran an sfc (system scan) and it generated the following error:

"Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS,log. Note that logging is currently not supported in offline servicing scenarios."

Here is an excerpt of the kind of fail found in the CBS.log file....

-01-27 13:20:58, Info CBS SQM: Initializing online with Windows opt-in: False
2016-01-27 13:20:58, Info CBS SQM: Cleaning up report files older than 10 days.
2016-01-27 13:20:58, Info CBS SQM: Requesting upload of all unsent reports.
2016-01-27 13:20:58, Info CBS SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL]
2016-01-27 13:20:58, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
2016-01-27 13:20:58, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\WINDOWS\servicing\sqm\*_all.sqm, flags: 0x6
2016-01-27 13:20:58, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]

I would attempt a repair with an install disc but I had problems a while back with malware which (amongst other things) prevented me from rolling back to any restore points and which I removed using Malwarebytes (... Read more

Read other answers
RELEVANCY SCORE 62.8

hi i have run the sfc scan 3 times each time it says it has fixed files? yet when i run again it says it has corrupt files?

see enclosed sfc scan results txt file ?

is something beyond repair or is there just lots of corrupt files and sfc can only do so many at a time so has to be re-run until there all done?

A:sfc/scan run 3 times still corrupt files?

The System File Checker (SFC) can only repair files that are in the mirror. And those are only the most important files. For a better resule you have to run a startup/repair with your installation/repair disc. That has a bigger inventory of files.

But even then there may be files that cannot be repaired - e.g. ,dlls that came with program installations that were not on the original installation disc but which were installed from the web.

Read other 6 answers
RELEVANCY SCORE 62.8

Was on Win 8.1 and found nothing of the sort "windows did not find any integrity violations". Upgraded to windows 10 and boom "Windows Resource Protection found corrupt files but was unable to fix some of them."


Full DISM log:
http://filebin.ca/2SEZKHF2uc6o

A:Found corrupt files (SFC scan)

Originally Posted by CandleJakk


Was on Win 8.1 and found nothing of the sort "windows did not find any integrity violations". Upgraded to windows 10 and boom "Windows Resource Protection found corrupt files but was unable to fix some of them."
Full DISM log:
http://filebin.ca/2SEZKHF2uc6o



Right click at Start button > click Command Prompt (Admin) > at the flashing prompt, copy/paste this.......
dism /online /cleanup-image /restorehealth

> press Enter.
It will take some time.
When it is finished, it will give you the report.

There is a chance you get the error code and message that " sources file could not be found ".
If that happens, please post back. There is a way to fix that.

Read other 1 answers
RELEVANCY SCORE 62.8

Ok i did a bit of searching and found that running sfc/scannow in command prompt would display any errors as ive been getting non responsive programs and crashing computer for a few days now.
It finished and said this:
Ive tried to access the file but it says access is denied. I am the admin and only user on this computer so not sure why.
Any ideas what to do next??

Cheers

A:Scan revealed corrupt files. . .what next?

Hi wales,

Try running it again; sometimes it takes more than one pass.

If there are still corrupt files, see How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7.

If you can't locate a good copy of a corrupted file, post back with details of the file(s).

Ed

Read other 12 answers
RELEVANCY SCORE 62

Hello

My latop has been turned itself off about 8 times today so I did a bit of reading on the forums and one of the things that was suggested was run the sfc /scannow command. The output says that it was unable to fix teh corrupted files that it had found and deposited the results of this scan in the CBS.log file.

This is the CBS.log file:-


Code:
2011-01-14 17:15:27, Info CBS Archived log file: C:\Windows\Logs\CBS\CBS.log to: C:\Windows\Logs\CBS\CBS.persist.log
2011-01-14 17:15:27, Info CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2011-01-14 17:15:27, Info CSI [email protected]/1/14:22:15:27.036 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6a788a50 @0x6c85854e @0x6c8363a1 @0x621392 @0x621ed4 @0x6217cb)
2011-01-14 17:15:27, Info CSI [email protected]/1/14:22:15:27.098 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6a788a50 @0x6c88e7b6 @0x6c870f93 @0x621392 @0x621ed4 @0x6217cb)
2011-01-14 17:15:27, Info CSI [email protected]/1/14:22:15:27.098 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6a788a50 @0x72941a0d @0x72941794 @0x62360b @0x622be3 @0x6217cb)
2011-01-14 17:15:27, Info CBS NonStart: Checking to ensure startup processing was not required.
2011-01-14 17:15:27, Info CSI 000000... Read more

A:results of my sfc /scannow scan saying can't fix corrupt files. Help!

Welcome
To try and correct the shutdown problems
Run the SFC three times if errors are found. If they are not repaired, go to event viewer (type that in search, by the start menu) and go to the left panel, Administrative and look for errors.

Run a full anti virus scan
Download and run a full scan with malwarebytes.


Make sure that you are not overheating, shutting down is a classic symptom.
Download and run speed fan to check tempsl

If that does not help
Test memory
http://www.geekstogo.com/forum/topic...ing-memtest86/


If nothing seems to help a repair install should do the trick, unless it is caused by hardware problems.
Repair Install For Vista[11]=Performance Maintenance

Read other 6 answers
RELEVANCY SCORE 61.6

Hello

I did a repair with dism and need these files to complete the repair.
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.18741
2016-08-27 14:08
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Microsoft-Windows-IE-Hyphenation-Parent-Package-English~31bf3856ad364e35~~~11.2.9412.0.mum Expected file name Microsoft-Windows-IE-Hyphenation-Parent-Package-English~31bf3856ad364e35~neutral~~11.2.9412.0.mum does not match the actual file name
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Microsoft-Windows-IE-Spelling-Parent-Package-English~31bf3856ad364e35~~~11.2.9412.0.mum Expected file name Microsoft-Windows-IE-Spelling-Parent-Package-English~31bf3856ad364e35~neutral~~11.2.9412.0.mum does not match the actual file name
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
(f) CSI Payload File Missing 0x00000000 AdmTmpl.dll amd64_microsoft-windows-g..olicy-admin-admtmpl_31bf3856ad364e35_6.1.7601.17514_none_4fe2107fd06efdd8
(f) CSI Payload File Missing 0x00000000 AdmTmpl.dll.mui amd64_microsoft-windows-g..n-admtmpl.resources_31bf3856ad364e35_6.1.7600.16385_en-us_65b23d3c3a97bfaf
(f) CSI Payload File Missing 0x00000000 AdmTmpl.dll.mui x86_microsoft-windows-g..n-admtmpl.resources_31bf3856ad364e35_6.1.7600.16385_en-us_0993a1b8823a4e79
(f) CSI Payload File Missing 0x00000000 AdmTmpl.dll x86_micr... Read more

Read other answers
RELEVANCY SCORE 60.8

Hi

I ran sfc and then sfcfix. Sfcfix found three errors that it can't fix. Can you help me to replace them?

The sfcfix log is attached here

Thanks

Read other answers
RELEVANCY SCORE 60.8

I ran scan disc and after it says i have several corrupt files that it wasnt able to repair.  I have posted below just a few of the entries on the cbs.log.  Can someone please help me to fix these issues??
Thank you
 
Marshall
 
 
2014-10-29 12:57:02, Info                  CSI    00000090 [DIRSD OWNER WARNING] Directory [ml:520{260},l:88{44}]"\??\C:\WINDOWS\Help\Windows\IndexStore\en-US" is not owned but specifies SDDL in component Microsoft-Windows-Assistance-CollectionFiles-Help.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
 
2014-10-29 12:57:02, Info                  CSI    00000091 [DIRSD OWNER WARNING] Directory [ml:520{260},l:50{25}]"\??\C:\WINDOWS\Help\en-US" is not owned but specifies SDDL in component Microsoft-Windows-Assistance-CollectionFiles-Help.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
 
2014-10-29 12:57:02, Info                  CSI    00000092 [DIRSD OWNER WARNING] Directory [ml:520{260},l:92{46}]"\??\C:\WINDOWS\Help\Windows\ContentStore\en-US" is not owned but spe... Read more

A:Need Help understanding CBS.log file after scan-disc found corrupt files.

I dont see how 42 different  people read this post but not 1 responce.  ???
 
 

Read other 48 answers
RELEVANCY SCORE 60.8

Hi All

Had issues with updating and eventually had to do sfc scan and it said it found and was unable to fix corrupt files, details included in the CBS.Log. On support.microsoft it advises that I replace the corrupt files manually bit I have no idea how to do this!

Unfortunately I cannot post the log, think it is too big.

Any help would be very gratefully received

Many thanks

PJB

A:sfc scan found corrupt files after update error 0x8024a000

Hello PJB,

Doing what's in the blue note box at the bottom of OPTION TWO in the tutorial below may be able to allow SFC to repair the files afterwards.

SFC /SCANNOW Command - Run in Windows 8

Read other 3 answers
RELEVANCY SCORE 60.4

Hi everyone,

Glad I found this place. I found that potentially some of the updates could have corrupted some of my windows files (thanks to you all for the heads up). Here's the summary below. If it helps, I do have windows 10 reserved--I saw some other post saying that might also be making some bad changes. Thanks in advance.

SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-06-15 18:30:31.862
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.


AutoAnalysis::
FIXED: Successfully repaired missing store directory C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_41e855142bd5705d.

FIXED: Corruption at C:\Windows\winsxs\amd64_microsoft-windows-u..ed-telemetry-client_31bf3856ad364e35_6.1.7601.18869_none_fde7d5f71db043ad\utc.app.json has been successfully repaired from C:\Windows\winsxs\amd64_microsoft-windows-u..ed-telemetry-client_31bf3856ad364e35_6.1.7601.23040_none_fe7de82236c5fac8\utc.app.json.
FIXED: Corruption at C:\Windows\winsxs\amd64_microsoft-windows-u..ed-telemetry-client_31bf3856ad364e35_6.1.7601.18869_none_fde7d5f71db043ad\telemetry.ASM-WindowsDefault.json has been successfully repaired from C:\Windows\winsxs\amd64_microsoft-windows-u..ed-telemetry-client_31bf3856ad364e35_6.1.7601.23040_none_fe7de82236c5fac8\telemetry.ASM-WindowsDefault.json.
CORRUPT: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757\comctl32.dll
CORRUPT: C:\Windows\wi... Read more

A:Ran SFCFix.exe the corrupted files; need help with manul fixes

Hey all,

I really need the help, here. Please take a look at what I've posted. I ran a few programs from some other guides and cleaned up registry with CCleaner. Right now comctl32.dll is missing. I found a site to download that file and replace it-my windows will not give me permission. I free up permissions-it claims that file is being used elsewhere, but I can't find the source. A lot of my programs won't respond because this important set of files isn't available and I can't find clearer explanations, or those that seemed relevant were also given as computer-specific examples and wouldn't apply to me. Please, please, take a look here or tell me what else you need so I can get my machine running again. Thank you.

Read other 8 answers
RELEVANCY SCORE 55.2

OK , having major difficulties getting these fixes to work. I have windows vista premium home, hjt will do the scan but halfway through says for some reason "your system denied write access to the Hosts file" I tried to set hjt to run as administrator but that is grayed out, so when I select "ok" it finishes the scan but no copy is posted in notepad. I did actually select a few known trash and it did remove them. dds appears to do its scan but doesn't post any results in notepad. And rootrepeal gives me a device controller error and wont scan. Does anyone have any suggesting on what to do? I did a system repair back to the 30 of December but that seemed to on reduce the popups.

Gordy

A:corrupt system wont let me run nso when i select "ok" it finnishes it's scan but no copy of scan is posted in noteb...

Welcome to BCPlease try this:Please download RSIT by random/random and save it to your Desktop.Note: You will need to run this tool while connected to the Internet so it can download HijackThis if it is not located on your system. If you get a warning from your firewall or other security programs regarding Rist attempting to contact the Internet, please allow the connection.Close all applications and windows so that you have nothing open and are at your Desktop.Double-click on RSIT.exe to start the program.If using Windows Vista, be sure to Run As Administrator.Click Continue after reading the disclaimer screen.Leave the drop down box set to default: "List/folders created or modified in the last 1 month (30 days).When the scan is complete, a text file named log.txt will automatically open in Notepad.Save the log file to your desktop and copy/paste the contents into a new topic in the HijackThis Logs and Malware Removal forum, NOT here.Important: Be sure to mention that you tried to follow the Prep Guide but were unable to get DDS to run.If RSIT did not work, then reply back here.

Read other 1 answers
RELEVANCY SCORE 54.4

I have been running into some issues with my computer for a while and after trying several things I decided to run SFC scan. It claims to have found corrupt files it could not repair but when I followed Option 3 from SFC /SCANNOW Command - System File Checker and opened the sfcdetails.txt file it shows everything as verify complete and no errors or corrupt files. I am attaching the sfcdetails.txt file as well as the cbslog.

Read other answers
RELEVANCY SCORE 48

Hi, 

I've recently upgraded my windows 7 to windows 10 enterprise. I have onedrive account with files synced to cloud, before upgrading i've backed up onedrive files locally in my computer. Some of those files can't be opened after upgrade, formats include
.docx and .xlsx and .png. Most of these files were in direct onedrive main/root folder rather than in subfolders. As i can see those images in subfolders can be opened but not doc and excel files.

How can i view those files again, why have they become corrupt, what could I do in future to prevent these problems

Read other answers
RELEVANCY SCORE 48

I have a laptop running vista i run avg8.5 and malwarebytes for protection when i start avg scann whole computer 20 mins into scan the laptop turns off when i restart get message scan log corrupt have tried reinstalling avg no luck and tried using CMD commands to find and fix any errors and same thing happens half way through the task it shuts off I have no clue what has gone wrong any one have some idea what could this mean.
I done a hijack this if this helps
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:16:53 a.m., on 14/08/2009
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18813)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\RtHDVCpl.exe
C:\Acer\Empowering Technology\eDataSecurity\eDSLoader.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Users\MICHEL~1\AppData\Local\Temp\RtkBtMnt.exe
C:\Program Files\Launch Manager\LManager.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files\Apoint2K\Apoint.exe
C:\Acer\Empowering Technology\eAudio\eAudio.exe
C:\Program Files\AVG\AVG8\avgtray.exe
C:\Program Files\AVG\AVG8\IdentityProtection\agent\Bin\AVGIDSUI.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Windows\ehome\ehtray.exe
C:\Windows\system32\igfxext.exe
C:\Windows\system32\igfxsrvc.exe
C:\Windows\system32\igfx... Read more

A:corrupt scan log

Hiya and welcome to Tech Support Guy

Are you still having this problem? If so, do the following:
Download TFC by OldTimer to your desktop

Please double-click TFC.exe to run it. (Note: If you are running on Vista, right-click on the file and choose Run As Administrator).
It will close all programs when run, so make sure you have saved all your work before you begin.
Click the Start button to begin the process. Depending on how often you clean temp files, execution time should be anywhere from a few seconds to a minute or two. Let it run uninterrupted to completion.
Once it's finished it should reboot your machine. If it does not, please manually reboot the machine yourself to ensure a complete clean.

Please download Malwarebytes' Anti-Malware from Here or Here

Double Click mbam-setup.exe to install the application.
Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
If an update is found, it will download and install the latest version.
Once the program has loaded, select "Perform Quick Scan", then click Scan.
The scan may take some time to finish,so please be patient.
When the scan is complete, click OK, then Show Results to view the results.
Make sure that everything is checked, and click Remove Selected.
When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
The log is automatically saved by MBAM and... Read more

Read other 1 answers
RELEVANCY SCORE 48

I have been having an issue with Symantec Leaving my logs full with scan Omissions 99% of which are compressed. After doing considerable research I find symantec gives a nice list of possabilities and things to look into. Personally none of these fixed my issue, but it may yours. If Anyone has any Ideas to add to Symantec's offical list of reasons for scan omissions please do.---------------------------------------------The following is From Symantec @ http://service1.symantec.com/SUPPORT/ent-s...002073015235648Event ID 6Solution:This event is typically encountered when any of the following occurs: You scan a compressed file that contains a password-protected file. The decomposer engine cannot provide the password required to gain access to the file, so it will be omitted during a scan. You scan files that have been locked for access by the operating system and access cannot be released to the scanner because the file is in use. You scan files that are recursively compressed to a depth that is more than the scan engine is set to scan. By default, the scan engine is set to scan a maximum depth of three levels (for example, a zip file contained within a zip file contained within another zip file). You scan files with LH7 compression, which is not a supported format. These compressed files commonly have an .lzh extension, and they are omitted by the scan. You scan files that are in use by another user. This is most commonly seen when you scan user directories and shared folders... Read more

Read other answers
RELEVANCY SCORE 47.6

Ok after I scanned with super antispy software and removed everything, I started getting bad image file errors with .dlls popping on anything opened and on startup. I cant get DDS to run it just pops up a command prompt and never does anything. So I will attach the gmer txt and post my HJT log here.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 951 PM, on 12/3/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\system32\CTsvcCDA.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\iaantmon.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\PnkBstrA.exe
C:\WINDOWS\system32\PnkBstrB.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Intel\IntelDH\Intel(R) Quick Resume Technology\ELServic... Read more

A:bad image files after scan with a super anti scan

bump please.

Read other 4 answers
RELEVANCY SCORE 47.6

Okay, here's my problem:
My hard drive is failing. It's under warranty and can be replaced.
I had an AVI capture from my camcorder that was several Gb, but is now marked at 0 kb.
Undelete software does not help as the file has not been deleted, but truncated to 0 kb.
I know in theory the data is recoverable.

Here's my theory:
Make an image of the whole hard drive, some 200 Gb.
Put this image on my PC at work and somehow scan this image and extract all video content.
Is there an application that will rip all video content from a large file that contains other "junk"?

Thanks in advance.
 

A:Recover corrupt AVI scan/rip ?

I assume the original avi file was captured on tape---Why not just get a new drive, and capture to the new drive---Why go through all the other nonsense.
 

Read other 3 answers
RELEVANCY SCORE 46.8

Hello i have a problem i use sfc scan but it wont help me fix the problem i dont know what to do
here is my cbs.log pls help me

A:pc empty cant see any drives,sfc scan cant fix corrupt

What do you get when you right click on "This PC" and select "Manage >Storage>Disk Management". Can you get to that?

Read other 7 answers
RELEVANCY SCORE 46.8
Q: SFCFix

Hello Noel. Thank you so much for providing this much needed service. I almost managed without any help but by the time I found the posts in wich the files are needed were, the zip files from your onedrive account were either gone or had changed to contain completely different stuff.

Thanks again

A:SFCFix

Please don't use Noel repairs for other computers. Each computer problems are different.

Just wait for Noel to give exact instruction for your computers needs with this problem.

Read other 9 answers
RELEVANCY SCORE 46.4

On opening the Task Scheduler I get a message " Task MP scheduled Scan. Task image is corrupt or has been tampered with ". I look in Library, Microsoft, Windows Defender and the Task MP Scheduler is not there. Real time protection appears to be working and I can do a manual scan through the control panel. Can I download a replacement Windows Defender file or can I fix what I have now without using Refresh or Recovery.

As an afterthought, is it possible to recreate the task in the library and please provide a snapshot of what it may look like

Read other answers
RELEVANCY SCORE 46.4

I performed an SFC /Scannow and have what appears to be one corrupt file left that needs fixing. However, I'm not sure what the report is telling me. Could a member here who knows about this take a look if I upload the file? Thanks.

A:How do I fix corrupt file reported in SFC scan results?

Hello Bret,

Check to see if the items in the blue Note box at the bottom of OPTION TWO in the tutorial below may be able to help for now.

SFC /SCANNOW Command - System File Checker

Read other 1 answers
RELEVANCY SCORE 46.4

I've been using the free Cobian Backup for about a year, with no problems. My backup procedure is to make full backups every 2 weeks, with daily incremental backups.

My 400GB external HDD is beginning to fill up. I need to remove some of the older full backups. Of course, the problem is that an older file may be non-corrupt, whereas a newer "copy" of the same file may have become corrupt.

I recently found another free tool, "Duplicate Cleaner". This file searches for duplicate files that can be identical in name, time, MD5 or any selected combination of these. I'm planning to use Duplicate Cleaner to remove duplicate files from my HDD.

So here is my question.

Is it possible for a corrupt file to show the same MD5 hash as an identical non-corrupt file? Or does the corruption produce a different MD5?

If the hashes are the same, then of course there is a danger that Duplicate Cleaner (or any tool) could delete the non-corrupt file and leave the corrupt file.

(Note that this thread is related to "MD5", rather than "Software".)
.

A:Is MD5 identical for corrupt/non-corrupt files?

Bump

Read other 1 answers
RELEVANCY SCORE 46.4

This is going to be a long winded, very experimental thread so here goes.
This is about 3 computers in question, I have 8.
One is an AMD athlon 2800+ 2.1Ghz with Inno3d 7600gs 512mb with 2gb ram.
The other 2 are Intel celeron (D) 3.46 ghz with 2gb 533mhz ram and 9400GT 1GB ram exactly the same pc's.
All running the same Windows XP PRO SP2.
I am trying to extract an RAR archive file using winrar on one computer with GTA San Andreas Ultimate 2008 from the OED.
This has worked before on this particular computer.
If you know who The OED is then you know what I mean.
Anyway, it works fine on the AMD and *one* of the Intels.
On one of the intels when I try and extract the archive, it says many files are corrupt.
Yet I have deleted all traces, and transfered again using a Toshiba flash drive.
And everytime I extract them it says they are corrupt.
remember this game has worked on this same computer before.
What is saying they are corrupt?
It works on the exact same pc in the next room.
I think my son has put some software on there which I have deleted.
Which may have put some hidden DRM type of virus that is trying to stop me using copied cracked programs.
It is not a firewall or anti virus problem I can assure you so do not even go there.Remember both PC's the same, identical, with everything.
Any ideas or questions?
Thankyou.
 

A:Problem with corrupt files which clearly are not corrupt

What is the "OED"?

We cannot help anyone with stolen software.

Your IP has been recorded.
 

Read other 1 answers
RELEVANCY SCORE 46

Yesterday I went to open up my desktop folder and it would crash after a couple of seconds. This happens all the time. If I open up any other folder like pictures, documents, video or music, they work fine. I ran Malwarebytes and Avast on the entire drive. Nothing was found. I also ran Avast just on the desktop folder. Again, nothing. I ended explorer process in task manager and restarted it. Even restarted the computer. Same thing. I ran a SFC /scannow and it said it fix some corrupt files but some could not be fixed. I have attached the log because I'm having a hard time figuring it out. Any help would be appreciated.

A:Desktop Explorer Window crashing, SFC Scan corrupt

Run---

Dism /Online /Cleanup-Image /RestoreHealth

in administrator cmd prompt,

then run sfc.

Read other 5 answers
RELEVANCY SCORE 46

I just got my McAfee Virus Scan 8.0 CD today andthere seems to be a corrupt file on the disc causing an Internet Explorer Script error as follows:
Line: 1093
Char: 1
Error: Object Expected
Code: 0
URL: mcp://E:\VSC\ENU\VSOINS.UI::default.htm

McAfee Security Application Installer has the following error: The installation cannot continue because some components are missing.

If any one has any suggestions on how to get rid of this problem please let me know. The script error appears after the End User License Agreement screen thus not allowing me to install the application.
 

A:McAfee Virus Scan 8.0 corrupt installation file

Is this xp? If so then uninstall and reboot into safe mode and retry the installation..
 

Read other 1 answers
RELEVANCY SCORE 46

A pre-scheduled scan of my pc was conducted today. It returned an indication that I have a ?Potentially Unwanted Program.? The item name is Corrupt-EP. McAfee indicated the status is ?Detected.? In the Details panel of the Scan Results (under ?Items?), McAfee shows the following path: Fine Name: C:\Users\Don\Desktop\456\Dell\drivers\R200272/00010001.dir. Also in the Details panel a link is provided for me to learn more about Corrupt-EP. Clicking on that link brought me to a McAfee webpage (http://home.mcafee.com/VirusInfo/VirusProfile.aspx?key=248985) which was not very helpful. It said that the risk assessment is N/A, date discovered was 12/16/2009, type is Program, and DAT Required is 5834.

As background, I recently had Dell try to recover some files that I had accidentally deleted (and they were not in the Recycle Bin.) They installed a number of programs in this attempt, operating my pc remotely. They were only able to retrieve a small number of files. At the conclusions of Dell?s efforts, they uninstalled all of the programs that they used in this process. This is the first McAfee scan conducted since Dell?s efforts.

Using Windows Explorer, I tried to view the path indicated above. I could not find ?456? in the described path. I seem to recall that the Dell technician working on my problem did create a folder labeled ?456? on my desktop during her efforts. It is not visible now on the desktop, either.

McAfee Secur... Read more

Read other answers
RELEVANCY SCORE 45.6

Hi

Here is my sfcfix log.

Need to manually repair some system files

thanks
sfcfix.log

Read other answers
RELEVANCY SCORE 45.6

Hi

I did a repair using the new "improved checksur" https://support.microsoft.com/en-us/kb/2966583 and then run a sfc /scan and sfcfix. How can I fix the files found by the later.
Here's the link to the log files
sfcfix

A:need to fix errors found by SFCFIX

Hi Garegin,
Lookin back you seem to have had this problem, or something like it for a while, and you kept re-installing to fix it.
My suspision is your install media is corrupt.
please run the following tools
Copy/paste the output please.
http://go.microsoft.com/fwlink/?LinkID=52012
http://www.sysnative.com/niemiro/apps/SFCFix.exe

and from C>> windows >> windowsUpdate the last days entries.

Roy

Read other 7 answers
RELEVANCY SCORE 45.2

Hey all, I've been randomly getting computer freezes and BSODs for the past couple weeks now, and I think I've narrowed it down to something dealing with either my hard drive or my windows install. I have a Kingston SV300 SSD with the latest firmware. For some reason my computer isn't saving minidump files so I can't look into the cause of the BSOD, so I figured I'd check hard drive diagnostics and windows diagnostics. My HD tests came back clean, but my SFC scan tells me that iassdo.dll.mui is corrupt and cannot be repaired.

Since I can't post the dump, I'll upload a picture I took of the BSOD along with the SFC results.

A:BSOD STOP:000000xF4; SFC Scan results (iassdo.dll.mui corrupt)

Follow this to configure minidumps:

Dump Files - Configure Windows to Create on BSOD

Then when you next get a BSOD, follow this:

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 6 answers
RELEVANCY SCORE 45.2

I just got my McAfee Virus Scan 2005 ver. 6.0 CD today and there seems to be a corrupt file on the disc causing an Internet Explorer Script error as follows:

Line: 1093
Char: 1
Error: Object Expected
Code: 0
URL: mcp://E:\VSC\ENU\VSOINS.UI::default.htm

McAfee Security Application Installer has the following error: The installation cannot continue because some components are missing.

If any one has any suggestions on how to get rid of this problem please let me know. The script error appears after the End User License Agreement screen thus not allowing me to install the application. Thanks for taking your time to read this, and hopefully help me out.

- Michael
 

A:McAfee Virus Scan 2005 corrupt installation file

Hi epidemic

Welcome to Tech Support Guy Forums!

It's rare, but sometimes a disk has a bad path or omission.
It might be a disk that slipped past the error check.

Looking on their website www.mcafee.com

I found this:
http://ts.mcafeehelp.com/?siteID=1&resolution=1024x768

Under Product Support, Hot Topics, click on the following error:
I receive "an error has occurred while installing" or the installation hangs at 77%

If none of their instructions help, at the bottom of the page is the option for:
I would like help from a live agent

Let us know what happens.
 

Read other 2 answers
RELEVANCY SCORE 45.2

Windows Explorer has stopped working error? I looked up how to fix it and it said to run a SFC scan. It says it cannot fix the error so I did a screen shot of the cmd and attached the cbs.log in rar format. I have Norton 360 for my antivirus and my PC spec are in my profile. Not sure how to fix the error in the cbs.log and as far as these kinds of problems I am a beginner. Any help would be greatly appreciated. This is a cbs.log error and my Windows explorer stops working and restarts. I am dumbfounded.

A:Ran SFC Scan and found a corrupt file . Windows Explorer keeps crashin

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-YG69F-9M66D-PMJBM
Windows Product Key Hash: /kehptF9HHVxM5d8dUnqgcfndXw=
Windows Product ID: 00426-OEM-8992662-00497
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {BEA5ACAB-6EB2-4700-9AFC-DE3A816FC658}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.150316-1654
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 100 Genuine
Microsoft Office Word 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-2... Read more

Read other 2 answers
RELEVANCY SCORE 45.2

Hi Folks!
I have a new instalation (clean) of win 10 in my machine. SFC acuses some erros, but it says that can't fix them. So, I'm trying a tool called SFCFix.exe. It can't fix the problem as well. I've read a lot about this errors in Windows 10, so I'm sending the links to screen to show what's happen when I run scf /scannow and SFCFix.exe. I'm sending links to SFCFixCrashDumps as well. Hope anyone can help-me to get my win10 running without errors again.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Thanks in advance.

Leonardo - From Brazil - Please, excuse-me about my poor english. A long time without pratice....

A:System corruption. SFC /scannow cannot fix. Even SFCFix.exe do not fix

Are you having issues? why did you run a check?

Read other 0 answers
RELEVANCY SCORE 45.2

Hello,

I have some issues with my Windows 10 Pro OS. So far, there are few problems I am facing and they are as follows: (For now)
1: When I put my PC into sleep mode/hibernation, every time, the PC auto wakes up at 2:00 am and at 1:00 pm (UK time)
1.1: This is another issue with putting PC in sleep mode/hibernation. whenever I put PC into sleep mode and then I try to login back it works good but after every 4 consecutive sleep modes/hibernations and sometimes only with one sleep mode/hibernation, the PC won't show up the login screen.The monitor screens just goes black and moving keyboard/mouse or doing anything won't help and I am forced to press the restart button or must completely shutdown and boot again in order to be able to use the PC again.

So in summary, the PC is limited only to sometimes 1 time and most of the times 4 consecutive times sleep modes/hibernations and must be restarted or shutdown.
2: Recently I tried to run SFC /Scannow but the scan stops at 62% and gives the following error message:

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 62% complete.
Windows Resource Protection could not perform the requested operation.

I also ran SFCFix and attached both SFC and SFCFix Logs.
3: Since Windows 10 Anniversary Update, I tried many times to update my Windows via ISO (download the correct ISO) about a month ago, I wasn't been able to update the Windows.
The update runs fine up un... Read more

Read other answers
RELEVANCY SCORE 45.2

Hi Folks!
I have a new instalation (clean) of win 10 in my machine. SFC acuses some erros, but it says that can't fix them. So, I'm trying a tool called SFCFix.exe. It can't fix the problem as well. I've read a lot about this errors in Windows 10, so I'm sending the links to screen to show what's happen when I run scf /scannow and SFCFix.exe. I'm sending links to SFCFixCrashDumps as well. Hope anyone can help-me to get my win10 running without errors again.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Thanks in advance.

Leonardo - From Brazil - Please, excuse-me about my poor english. A long time without pratice....

A:System corruption. SFC /scannow cannot fix. Even SFCFix.exe do not fix

Are you having issues? why did you run a check?

Read other 0 answers
RELEVANCY SCORE 44.8

Good afternoon,

I have been experencing really low internet speeds on my computer. I have ran many tools such as HiJack this, ComboFix, AVG (Including rootkit) and Malwarebytes. Several of these tools found things here and there which seemed to have been removed.

I have set my computer up to dual boot WIN XP/WIN 7. I only experience the low speeds while using Win 7 which seems to make me thing that something is taking the majority of my bandwidth usage.

Could any take a look at my logs and see if there is anything going on before I decide to reinstall the os.

P.S I have also included my HijackThis log file.

Thanks in advance!

A:DDS scan and GMER scan log files.

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===This process looks suspicious.C:\Users\James\Desktop\Security Tools\mb9soxkz.exeDo you know what it is?Did you installed this driver or do you know which application needs it.R1 enport;enport;c:\windows\system32\drivers\enport.sysIt may be valid but I cannot find sufficient information on it.===Please download ComboFix from any of the links below, and save it to your desktop. For information regarding this download, please visit this web page: http://www.bleepingcomputer.com/combofix/how-to-use-combofixLink 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopIMPORTANT....1. Close any open browsers.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.3. Do not install any other programs until this if fixed.How to : Disable Anti-virus and Firewall...http://www.bleepingcomputer.com/forums/topic114351.htmlDouble click on ComboFix.exe & follow the prompts. When finished, it will produce a report for you. Please post the C:\ComboFix.txt Note:Do not mouse click ComboFix's window while it's running. That may cause it to stallNote: If you have difficulty properly disabling your protective programs, refer to this link --> http://www.bleeping... Read more

Read other 2 answers
RELEVANCY SCORE 44.8

Ran SFCFix, SFCFix.txt file contents:
version 2.4.3.0 by niemiro.
Start time: 2015-02-28 13:23:54.751
Microsoft Windows 8.1 Update 3 - amd64
Not using a script file.
AutoAnalysis::
FIXED: Performed DISM repair on file Amd64\CNBJ2530.DPB of version 6.3.9600.17415.
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.
Successfully processed all directives.
SFCFix version 2.4.3.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2015-02-28 13:54:21.820
----------------------EOF-----------------------
 
Ran SFC /SCANNOW
 
CBS.log file converted to text: attached
 CBS.txt   141.86KB
  1 downloads
 
I have also run DISM as follows:
C:\WINDOWS\system32>Dism /Online /Cleanup-Image /ScanHealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
[==========================100.0%==========================]
The component store is repairable.
The operation completed successfully.
 
Then ran:
C:\WINDOWS\system32>Dism /Online /Cleanup-Image /CheckHealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
The component store is repairable.
The operation completed successfully.
 
Finally:
C:\WINDOWS\system32>DISM.exe /Online /Cleanup-image /Restorehealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
[==========================100... Read more

A:CNBJ2530.DPB error not fixed by SFCFix and DISM

I have the exact same issue...

Read other 1 answers
RELEVANCY SCORE 44.8

I've found that the sfc scannow won't complete; it stops around 41%. I have rebooted in safe mode and attempted the same with exact same result at 41 percent. I found a similar member with this same issue, and it was recommended that they download and run SFCFix. I have done that, and I received the following:

Error: 87
An error occurred while processing the command. Ensure that the command-line arguments are valid. For more information, review the log file.

Below first is my system info, and below that is the dism.log. I'd appreciate any assistance with this matter because I use this computer for graduate school, and I don't have the ability to use the windows start button. Typically, I wouldn't have updated my Windows 7 to 10, but I was happy to see the return of the start button; however, I'm seriously regretting my decision. Thank you to anyone that has a solution in advance.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: AMD Phenom(tm) II X6 1100T Processor, AMD64 Family 16 Model 10 Stepping 0
Processor Count: 6
RAM: 12248 Mb
Graphics Card: AMD Radeon HD 6900 Series, -2048 Mb
Hard Drives: C: Total - 2096600 MB, Free - 1967509 MB;
Motherboard: ASUSTeK Computer INC., Crosshair V Formula
Antivirus: Windows Defender, Disabled

DISM Log

2015-08-13 01:19:22, Info DISM PID=672 TID=848 Scratch directory set to 'C:\Users\ADMINI~1\AppData\Local\Temp\'. - CDISMManager:ut_Scra... Read more

A:sfc scannow file error; then used SFCFix log provided

Check the system image for corruption.
https://technet.microsoft.com/en-us/library/Hh824869.aspx
Once complete, rerun the sfc scan.
 

Read other 1 answers
RELEVANCY SCORE 44.4

Okay, so recently, my dad's laptop started goofing up. It is a Toshiba Satellite P305. I currently have a HijackThis log. Any... odd entries?

Here are some error messages I get:
On boot, I get the following error message: "The following file or directory is corrupt: \Program Files\Toshiba\SmartFaceV. Please run CHKDSK to repair." So I ran CHKDSK. It still does it, so idk?

Trying to open that directory, I get the following error: "C:\Program Files\Toshiba\SmartFaceV is not accessible. The file or directory is corrupted and unreadable."

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:04:06 PM, on 11/8/2010
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18975)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\system32\igfxsrvc.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Camera Assistant Software for Toshiba\traybar.exe
C:\Program Files\Toshiba\Power Saver\TPwrMain.exe
C:\Program Files\Toshiba\SmoothView\SmoothView.exe
C:... Read more

A:C:\Program Files\Toshiba\SmartFaceV is corrupt. Can't access. No files, recently modified?

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below I will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the ... Read more

Read other 3 answers
RELEVANCY SCORE 44.4

i just recently back up my files to an hd drive with help of win 7 back up wizard and now my question is how to restore back up files if the pc is no longer working because of corrupt files?? or BSOD or anything... please help.. i just want to be prepared in any outcome that may occur..

A:how to restore back uped files if the pc is no longer working because of corrupt files??

Well first of all, you don't want to restore your backup if your pc is no longer working. A backup only makes copies of your personal files, like documents, pictures, ect... You would want to use your Windows 7 CD/DVD to restore your system to factory specs, then you restore your backup (using the same Restore Wizard) to get all your personal stuff back.

Hope that answers your question.

Read other 1 answers
RELEVANCY SCORE 44.4

I get a windows boot error 0xc000000e if I try to boot into safe mode or launch startup repair through through windows boot manager. I tried using a windows 7 recovery usb but startup repair says it cannot repair the problem automatically. Through the command line I ran chkdsk /f and /r multiple times, and now all the files verify and and there are no more bad cluster errors, but I still can't boot. I can get into f8 options but safe mode doesn't work nor does startup repair so I'm not sure what good that does. If I try to boot windows 7 normally, it hangs on the startup screen and the animation doesn't run.

I used partition wizard and it can explore the filesystem fine. It also says that the partition with windows 7 and all my data, is inactive. I tried setting it active using PW but it doesn't do anything. I also tried to fixmbr but it doesn't seem to make a difference either.

I ran an offline sfc scan and it said it found corrupt files but was unable to repair, which I would usually do a inplace upgrade but I can't boot. I'm running chkdsk /r again to see if I can atleast get into safe mode then do a repair install, and finally make a clone when my replacement hdd arrives. I have backups but since they were ran while the partition wasn't bootable I'm not sure if I can get it to boot on a new hdd anyway, which is why I want to make a clone while running windows 7.

I am not sure why I keep getting hdd inaccessible errors or why I'm unable to boot when every tool ... Read more

A:Windows 7 won't boot, SFC found corrupt files, hdd/files still intact

Hello M mate try one of these
5 Bootable AntiVirus Rescue CD for Windows: Free Download I would start with the Kaspersky one.

On second thoughts try these first

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer – delete any rubbish these find.

Read other 2 answers
RELEVANCY SCORE 44.4

I believe I've a corrupt file system/registry. The windows explorer hangs a lot. Accessing files in drives takes too long. Ran Malwarebytes, NOD32 online scanner. It's all clean. SFC doesn't run.

So, I've run SFCfix.exe & attached the generated SFCfix.txt. I've also attached CBS.zip. Please help.

Read other answers