Over 1 million tech questions and answers.

ethernet/wireless router

Q: ethernet/wireless router

netgear n300 wireless
wnr 2000 v4

Ethernet cable connections are ok
The computers that connect wirelessly have to be restarted often to regain connection.

RELEVANCY SCORE 200
Preferred Solution: ethernet/wireless router

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: ethernet/wireless router

from one of the computers - can we see an xirrus screen shot please

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
( the site now appears to require a business email, and does not allow webbased emails like gmail,hotmail or yahoo etc )

Use the links below

http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html
http://www.softpedia.com/progDownload/Xirrus-Wi-Fi-Monitor-Download-99109.html

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

Run the program

A user guide is available here
http://www.xirrus.com/cdn/pdf/xirruswifiinspectorguide1-2-0

post a screen shot of the program running.
if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)
Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better. "A desirable signal level for a robust Wi-Fi connection will be green".
note: the signal level is a negative number, so for example -88 is worst and -40 is better

To post a screen shot of the active window.

Windows XP
Hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.

Vista or Windows 7
you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool
http://www.bleepingcomputer.com/tutorials/how-to-use-the-windows-snipping-tool/

Windows 8
you can use the snipping tool > Open Snipping Tool (From the Windows 8 Start Screen, type "snip" and press enter.
>Press the Esc. key.
>go back to your Windows 8 start screen - Swipe from left or press Window Button
>Press Ctrl+PrntScr button to use Snipping Tool
see here
http://www.pcadvisor.co.uk/opinion/windows/3415854/how-take-screenshot-in-windows-8/
http://www.pcadvisor.co.uk/how-to/windows/3405830/how-take-screenshot-in-windows-8/
To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
Full details are available here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

Read other 2 answers
RELEVANCY SCORE 64.4

I have a sagem 3304 wifi modem router provided by the telecoms company. it has a limited wifi range and in my experience of wifi it also has frequent dropouts/connection problems. we connect the desktop pc to it by ethernet and that's just fine.

we also were given (by a 3rd party) a belkin n1 wireless router (the model without modem) and would like to try it out to be the wifi router. The idea is to connect it by ethernet to the sagem and place it in a more central part of the property. I reckon about 15m of ethernet cable. we would disable the wifi on the sagem. had we been given the belkin model with internal modem, this would not be an issue and we would not need to use the sagem at all - that is not meant to sound ungrateful!!

can anyone see any pitfalls with this? or if it is do-able, any recommendations re:configs?

I have found another post loosely related to using 2 routers however it doesn't really address this specifically:
http://forums.techguy.org/networking/715999-using-2-routers-same-time.html
 

A:Connecting a wireless router to a modem router via ethernet?

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).
 

Read other 3 answers
RELEVANCY SCORE 63.6

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

A:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

Read other 6 answers
RELEVANCY SCORE 63.2

Hello, wondering if I could anyone could help me out.
My father used to have SBC DSL and used a 2WIRE-wireless router. He liked being able to have his computer connect to the internet downstairs and connect by access point with his laptop upstairs. Well he moved and now has DSL through anther phone company(www.NETNET.com) He now connects through a ethernet router. Not sure how to use the wireless router as well as the ethernet router? Thank you for anyone who takes the time to help out!
 

A:Connecting a DSL ethernet router and wireless router

Can't he just use the wireless router and not the ethernet router?
 

Read other 2 answers
RELEVANCY SCORE 63.2

My question is regarding our needs for a router/routers.

Our current setup consists of an ethernet broadband router (where everything plugs in) in the "main box" that holds all of the wiring that then goes throughout the house into the bedrooms/den/kitchen desk via cat 5 wiring.

At each of those room locations you can then plug into the wall (cat5) for internet/phone/etc. We have many items that use wifi (iphone, tablets, roku and laptops) so we have plugged a wireless router into the cat 5 jack in the den, then plugged the desktop computer in that room into the wireless router. The rest of the items are used wirelessly throughout the house.

Well our broadband router up in the "main box" we think is going bad (guess is its 8 yrs old). Our internet lately has been patchy, slow and needing to be reset often. Upon speaking with our ISP, they say the connection to the dish on the deck from their tower on the neighboring hillside is "excellent", so we are thinking it must be the router installed when the home was built.

My husband logs on to his work computer from home with gotomypc.com and works on (enormous) spreadsheets, so we need speeds to be fast to keep his sanity. Our current service is 4mbps.

Now my questions finally, 1) do we need the 2 routers i.e. the broadband router in the "main box" with a wireless router in the den or can we do everything we need with one router in the "main box"? The "main box" is ... Read more

A:Ethernet broadband router and/or wireless router

Read other 6 answers
RELEVANCY SCORE 60.4

*I am not tech savvy, at all! I will need specifics on HOW to get somewhere/do something. A lot of the terminology used is completely foreign to me.* ​
Weeks ago, my Toshiba Satellite P755-S5215 suddenly stopped having internet access. Instead of a 'connection' icon, I had a computer (??) icon with a red X over it. It said there were no drivers installed. At the time, I had the phone/email support of my computer-knowledgeable ex-husband, who has since decided to stop offering his help. With him, I was able to re-install all network adapters (which were showing the yellow triangle/exclamation mark..I have 7 WAN Miniports that still show this). I tried rebooting in safe-mode, I tried system restore (it says the specified object was not found), and when I tried to run the recovery disc, I go a pop-up message that said "This program does not have a file associated with it for performing this action..."

I did something, as I now get the 'connection' icon, however it has the red X, and says no connections are available. My sons' computers/phones/tablets pick up the wireless, so I know there are connections available. I also tried to connect using an ethernet cable, but that didn't work, either.

I appreciate any help that anyone has!
Thank you!
 

A:No wireless or ethernet connection - not router

Read other 16 answers
RELEVANCY SCORE 60.4

Greetings:

Our home school's having trouble attaching a wireless router to my XP PC's ethernet port.

Our donated vintage Macs and XP machines are tied to the internet via a cable box's wireless router. Works just fine. Now I wish to boost the signal to a building beyond the local area by attaching a wireless router to a Dell 260 running XP. This router's IP is 192.168.11.1 (ON) and 192.168.11.100 (OFF), and I've spent hours with the Connection Wizard thing on XP trying to create a ethernet path to the router but I can't find a configuration that states an ethernet path or channel. The modem lights normally and other machines can pick up and connect with its signal but there's no real transmission, the receiver machines getting:

Firefox can't find the server at http://www.acorn.com.
Check the address for typing errors such as ww.example.com instead of http://www.example.com
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Ironically, the router works just great on the Macs, which has both Airport on to receive signals from a cable TV wireless router and also has its shared Ethernet connection on, and the ethernet side requires no IP configuration like it seems you must on the XP's internet connection page. The router in question just plugs in the Mac and transmits just fine. I... Read more

Read other answers
RELEVANCY SCORE 60.4

Hello,

I have a hopefully simple problem to solve!
I'm in a shared house and the wireless router lives just outside my room. However, the wireless has been playing up a lot lately and keeps dropping out.

I have an ethernet cable connected from my PC to my PS3.

Can I remove this from the pS3 and connect it to the ethernet port on the router to get a wired connection?
I tried it but it would only pick up the wireless and, when I disabled the wireless dongle, nothing at all!

Is there some setting I need to make to 'active' the ethernet connection?

The Router is an O2 Wireless II box. I have Windows 7 Ultimate.

What the lights on the O2 wireless box mean - Support - O2

I may end up getting a separate service put in, because the dropping out is really annoying, but I thought this would be a relatively simple stopgap solution!

Thanks
Mark

A:Ethernet/Wireless router confusion...

For the wireless dropping out problem, have you tried using a different channel in the router's wireless connection settings?

You can scan the area around your house using this Xirrus wi-fi inspector which will help you find an unused channel in your area.

Xirrus: The Leader in High Performance Wi-Fi - Advanced IT Wi-Fi Networking Tools

As for the wired connection, assuming the DHCP is enabled, it should work as soon as you plug in the eithernet cable. If not, then you might need to download some drivers for your wired eithernet adaptor.

Read other 2 answers
RELEVANCY SCORE 60.4

Hello, friends,

So, I have a weird issue. The other day, I was playing League and my connection started dropping. I spent a couple of days troubleshooting everything I could think of - using multiple PCs, swapping ethernet ports, messing with my router, etc. After a lot of frustration, I had an idea.

Now, on my roommate's PC, he could play League with no issue. On my laptop and my desktop, I couldn't do anything without my connection failing. Bear in mind, I'm hard wired and he's on wifi. Now, our router has a 2.4 ghz band and a 5 ghz band. His wifi connection is on the 5 band, and, as I mentioned, he had no issues. I asked him to swap over to the 2.4 connection, and all of a sudden, lag spikes everywhere.

So, from that we managed to deduce that the 2.4 ghz band on our router is dying. That's all well and good, but now we have another issue - why is our network connection trying to force its way through the wireless router? We tried hardwiring 4 different PCs, and 3 of them are defaulting to the wireless router networks, even when the wireless adapters are turned off. My laptop and desktop are defaulting to 2.4, my roommate's desktop is defaulting to 5, and our last desktop is connection just to "Network". Below is a screenshot of my network connections.
I tried doing an ipconfig /release, /renew, /flushdns, but I got the following error - "The operation failed as no adapter is in the state permissible for this operation." I'm completely ... Read more

A:Ethernet connection going through wireless router

Welcome to the forum!

Choose to "forget" the wireless network. Turn off wireless SSID broadcast on the router. Unselect "connect automatically" for the wireless network. Select "connect automatically" for the wired network.

Read other 9 answers
RELEVANCY SCORE 60

Hello,

My problem is that I can not access the internet and print at the same time. I access the internet thru a modem with a ethernet connection directly to my laptop and I also have a wireless router (TrendNet 54 Mbps, TEW-432BRP) that I use to connect 2 printers.

If I want to use the internet I have to disconnect the wireless router and then if I want to print, I have to re-connect the wireless router which then prevents me from accessing the internet. I can only connect to one of these at a time which is driving me crazy.

I also receive error messages about ip address conflicts on my laptop so I don't know if this has anything to do with my problem. I hope someone can help me with this.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Celeron(R) CPU B815 @ 1.60GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 4039 Mb
Graphics Card: Intel(R) HD Graphics Family, 1795 Mb
Hard Drives: C: Total - 260242 MB, Free - 119605 MB; D: Total - 29690 MB, Free - 27423 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: Microsoft Security Essentials, Updated and Enabled

Thanks & God bless,

Patrick
 

A:Solved: Ethernet & Wireless router problems

Read other 13 answers
RELEVANCY SCORE 60

I was on here last night trying to get my laptop to connect to wireless internet. I'm still working on figuring that out with the person I bought the laptop from and I may end up purchasing a wireless card, but now my question is:

Can I connect to the internet right now by using an ethernet network cable plugged into my computer and into the D-link router which my desktop computer already accesses the internet from?

I plugged it in but nothing happened.
 

A:Using an ethernet cable to connect to wireless router..

Read other 12 answers
RELEVANCY SCORE 60

Friends -

I am a comcast cablemodem subscriber, and recently upgraded some of my hardware, including a new Motorola modem, which is working fine, and a new Linksys Wireless Router, which doesn't seem to be working fine. The Linksys is talking to two wireless laptops and three desktops, all running Windows XP with SP2 and up to date on all security & patches.

The wireless laptops have no trouble with internet access through the new router, however, two of my three desktops which are connected to the router via standard 10-base-T ethernet cable are having sporadic internet connectivity. The desktop through which the router was installed never has any difficulty with its internet connection. Swapping the cables among the 4 ports on the router doesn't make any difference. All of the default settings were taken with the router's installation (no domain/host indicated), and DHCP for assignment of IP/DNS addresses. Installation was successful. All three of the desktops show a live connection to the LAN at 100 Mbs, even when the two affected desktops can't access the internet. The phenomenon is the same for Netscape, Mozilla, and IE browsers. The TC/PIP settings on each of the desktops are set for "auto" when obtaining the IP and DNS addresses. Comcast will not provide a static IP address to use for the DNS setting, and says that their policy is to use DHCP to assign the addresses. Linksys has been unhelpful.

The cables and ethernet cards are all ... Read more

A:Ethernet Troubleshooting on a Linksys Wireless Router

Make sure your Linksys router has the latest firmware. You can update it from www.linksys.com
 

Read other 2 answers
RELEVANCY SCORE 60

My trusty linksys wireless router got fried in a recent electrical storm. While waiting for a new d-link "airplus extreme g" to come in, I've been relying on old wireless routers lying around, like a netgear WGR614 v6.

I connect to the router via ethernet because a) I have a desktop and b) no wireless router I've ever used has allowed me to work in sshell without dropping me after a few minutes. I do a lot of work in shell and after the linksys fried, if I wanted to run a program that takes a while, I had to take everyone off the wireless router and connect to the modem directly. I was hoping my new d-link would solve the problem, but so far things are actually much worse.

I'm still connected via ethernet only but now I get "a network cable connection is unplugged" about every 15 seconds (or less). Again, I never had this problem with the linksys but the other modems I've tried since have been pretty problematic, dropping all the ethernet-connected computers on the network. Any ideas?
EDITED: updated the firmware, that seems to help ... please ignore this message until I know I'm stuck again! I would delete it, but that doesn't seem possible.
 

Read other answers
RELEVANCY SCORE 60

Executive summary:

I want to add a win98 laptop to my network which consists of a desktop that receives a wireless signal from a router. The laptop would connect to this desktop with an ethernet cable.

Here is my detailed setup:

I.
A) Internet comes in through the wall to a Shaw surfboard, then uplinks to a D-Link router (DI 524 - a bit old).

B)The router sends wireless signals flying across the apartment to my desktop
i)which has a wireless ring receiver thingie (http://i265.photobucket.com/albums/ii221/computer-camp/ASUS Wireless Antenna/oly3646.jpg)
ii)The router also connects directly to my girlfriend's computer via ethernet, but that's not important right now.

II.
A) My desktop has two ethernet ports.
B) The desktop connects to a laptop running win98 (best for playing old games - at least the ones that don't run so well on DosBox)
i)The laptop has an IP when I use ipconfig to check what it sees. This IP is 169.254.122.9
ii)The laptop also shows a default gateway: 255.255.0.0

III.
A) When I look at the network, I can see my computer and my girlfriend's. I cannot see the win98 laptop. I suspect I must make changes to its network settings so that I can see it in the list of computers. I might have to bridge some connections? Enable internet connection sharing on the laptop? (AND desktop??) I'm not sure.

additional info: pinging 169.254.122.9 from the desktop: request times out.

ipconfig info for the desktop:
DHCP enabled: yes
Autoconfig e... Read more

A:Is this possible? wireless router + desktop + ethernet + win98

Read other 16 answers
RELEVANCY SCORE 60

I have had Windows 10 for a while and haven't had this problem until today. My connection was fine until I woke up this morning. I have tried updating my drivers but none are corrupt and are up to date. I have tried several solutions and looked at many videos and I cannot find a fix. Can anyone help?

A:My Ethernet cable nor wireless detects router.

Hi Dez37, welcome to the forums. Go to start, search and type cmd right click on the returned command prompt and select run as administrator, at the prompt copy paste:-

ipconfig/all > 0 & notepad 0 (press enter) Please post the notepad outcome here.

Also go to start, search and type devmgmt.msc, press enter, device manager will open, expand the tree under network adapters, tell us what you see.

Try a power cycle, turn off the modem/router and remove all power to it, turn off your computer and remove all power to it (if a laptop take out the battery) with the power off press the computer start button for a second, this will drain any residual power, leave the computer off. Now repower the modem/router and wait until it acquires all lead lights. Once this happens repower your computer, test your connection now.

Read other 13 answers
RELEVANCY SCORE 60

I need to connect my W98 SE PC to my wireless router via ethernet cable so I can change the router's settings. I have never used the ethernet adapter on the this PC. DO I have to install any software first? I have been accessing the router via a wireless adapter. Could it be (I hope) as simple as plugging in the wire between the PC and one of the 4 router ports? Does the router signal the PC or will I need to reboot?
Sorry for the "dumb" questions but I know I always get good advice from you guys, and learn in the process.
 

A:Setting up direct ethernet to wireless router

If you can access the router via wireless you can configure it from there as well.
 

Read other 3 answers
RELEVANCY SCORE 60

I was wondering if it is possible to connect my printer (HP 6310xi) to my wireless router. Both have ethernet ports so I will be using my ethernet cable.

I wanted to do this mainly because originally my printer is connected to my desktop and I am using print share, but I'm getting rid of the desktop so the print share will be gone, and I still want to be able to print wirelessly from my laptop.

Thanks.
 

A:connect printer to wireless router (ethernet)

Read other 7 answers
RELEVANCY SCORE 60

Hello,

Thank you very much for your consideration of my problem. I reviewed a couple different searches, but I could no find no information to solve my current problem.

I am running Windows XP Home edition on a Compaq Presario. I have high-speed cable internet through Road Runner, which works very well on my desktop computer. Because of my laptop, I wanted to set up a wireless network, so I purchased a Linksys WRT54GS. For a time, the router allowed my desktop to work on a LAN connection, although the laptop couldn't seem to use the wireless router. The laptop was a budget Toshiba Satellite L35, so I thought maybe the laptop was the problem, but since I have successfully picked up wireless in a few different places outside the home with the laptop.

After about a month, the LAN connection stopped working with the desktop. I believe this occurred after the cable company replaced my modem with a new one. Currently, I have the internet running from the cable modem directly to the desktop. When I plug the desktop into the router by ethernet cord, the power light is solid as is the WLAN light, and the "1" light and the internet light. However, my computer is unable to connect to the internet ("Server not found"). Because of this I can't access the router settings page online, nor can I access wireless from my laptop. Finally, the set-up disk was sadly broken.

Any help or suggestions are greatly appreciated.
 

A:Ethernet and Wireless Issues Linksys Router

Read other 8 answers
RELEVANCY SCORE 60

I have a Belkin G wireless router connected to an Arris modem (Comcast).
I am trying to connect a laptop and an android phone. There is also a PC connected to the wireless router via an ethernet cable.

When the PC is connected, the speed of the wireless connection drops significantly.
From my phone speedtest shows ping 13ms, 27.75 down and 24.18 up when the PC is not connected. When the PC is connected, speedtest shows ping 20ms, 0.2 down, and 0.1 up (if the connection doesn't time out.)

It seems the ethernet connection is taking nearly all the bandwidth and the wireless devices just won't work. How can I give equal bandwidth to the wired and wireless connections?
 

A:Wireless router won't work with ethernet connected

Read other 9 answers
RELEVANCY SCORE 60

Good afternoon everyone,

Please excuse the way that I may communicate as I am fairly new to posting on here.

I have been having problems with my fathers computer. He currently has a linksys B network card and also has the capability of hooking up with an ethernet cable as he is close enough to it. The software he is using is windows XP

The problem that he has is that while he is using any of his applications, such as on facebook, the computer will intermittently lose connection completely. At first i though that it may have been a problem with the network card but then found out that it is also happening when directly connected.

I run on the same router in the house and use a dell Latitude E6500 with windows vista and no problems staying online.

Does anyone have any possible idea as to how to resolve this. I am in the process of ordering a new network card for him that is a 802.11g instead of a 802.11b beyond this I cannot find any idea as to what is causing it. Any assistance is appreciated and I am more than happy to provide anymore necessary info.
 

A:computer int disconnects from router on both wireless and with ethernet

Welcome to TSG:
If you are experiencing disconnects on both wired and wireless,I might assume that the problem does not lie with the wireless adapter alone.
Couple of things I might do.
Run your updated antivirus/antispyware suite to flush out any potential threats.
When you lose connectivity,take a look at task manager.Any particular task/process using a high % of cpu.? Idle task should be running above 90%.
Boot up in safe mode with networking.
Same problem?.
Just to be safe,I might download any more current firmware for your router.I understand that your other pc does not have an issue,but newer firmware if available can't hurt.
Any error msgs when connectivity is lost ?
How do you recover ?
 

Read other 2 answers
RELEVANCY SCORE 59.2

Hi, I hope you can help - I am trying to connect a ZyXEL P660HW Wireless ADSL Modem router to my Windows XP SP2 desktop computer. I have had various problems but have now managed to get my LAN connectivity back and this is telling me my LAN is connected but the LAN socket on the router is not lighting up when I connect the ethernet cable into the back of the PC.

When I try to connect to the internet via the router nothing is happening and I get the following message after running network diagnostics:-

Error attempting to validate Winsock base providers:2

Not all base service provider entries could be found in this winsock catalog. A reset is needed.

I have run several winsock fixes, they all tell me the catalog has been repaired but I am still getting this error. I have re-set the router (several times) and have configured the IP address and default gateway. I can connect to the internet using my Speedtouch modem with no problems at all.

I have run out of ideas - please help!!
 

A:Problems connecting wireless router via ethernet cable

Read other 13 answers
RELEVANCY SCORE 59.2

I have read several solutions to similar problems but they do not work in my situation for some reason. (including the colledge dorm and router to router solutions)

MY SETUP
I am work on drilling rigs at remote locations way up North. As such my internet come to me via satellite. I do not have access to the modem (if you even call it that in this situation). All I have in my building is a wire called a "Pason Cable" that enters through the wall.

Only one computer on location has the necessary port on the back to connect to this cable. (window 2000 OS)

This computer then has a cable which I believe is called an eithernet cat 5 port with a cable coming out of it. We have always connected this to various wireless routers. (Different people bring their own)

I recently purchased a new D-link DIR-625 wireless N router.

I have it hooked up with the cable out of the aforementioned computer going into the "internet" port on the D-link.

The Problem
Computers can connect to the new D-Link with 100% signal but cannot connect to the internet. The router confirms that the is no connection to the internet via a flashing light indicator.
Attempted Solutions
I have attempted to use the other solutions on this site:
-Disable DHCP and set the first three numbers of the routers IP address to the same as the host computers, and the last to 254.

-I have also connected the line out of the first computer directly to a second computer (internet works when I do this... Read more

A:Connecting wireless router to ethernet coming out of a computer

Read other 15 answers
RELEVANCY SCORE 58.8

Hello all,

I have an Acer laptop running Vista which I believe has a broken ethernet port (it's a basically new computer but port has never worked - will contact Acer about it, but in the meantime...)

When I had my internet installed the guy was here for 3 hours because we couldn't get it to work through the ethernet port. Finally he loaned me a wireless router (linksys WRT54G) and the internet works with that. I have to return it to him so I got a different one (D-Link DI-524) which I believe my parents have used in the past but never had a password on it or anything.

I cannot run the configuration for the D-Link from the set-up CD because it wants me to plug an ethernet cable from my computer into the router, and it's not able to find it. But when the installer guy gave me the Linksys router, he just plugged it in and off we went - no config needed, straight out of the box.

I plugged the new (D-link) router in and tried to find it in the list of networks available without configuration, because it may have been configured before. An unsecured network comes up called "Home" (my parents would quite probably name it something like that if they had used it before) but the signal is weak, and when I try I am not able to connect to it, so I'm not sure if that's this router (it comes and goes and I'm not able to determine if it's there when mine is plugged in or not).

You guys usually ask for ip adresses, so here's the info f... Read more

A:Configuring wireless router with broken ethernet port on computer

There isn't a way to configure the router without a wired network connection. You can pick up a pretty cheap USB to Ethernet adapter.

http://www.newegg.com/Product/Product.aspx?Item=N82E16833156133
 

Read other 1 answers
RELEVANCY SCORE 58.8

Hi,
I have a new D-Link DSL-2740B wireless modem/router.
I am moving on campus for University, and I only have access to a ethernet port not a DSL port.
Is there a way I can use my modem/router as just a wireless router?
To do this I would assume i would have to use a LAN port as a internet in port?
Thank you in advance for any help.
Otis.
 

A:Using university (college) ethernet internet with a wireless modem/router?

yes, you would setup as a 2nd router / switch
BUT you may find its against the university rules to use routers on the network
I would check with the IT department and ask them how to do it
 

Read other 3 answers
RELEVANCY SCORE 58.8

Hi guys - setting up computers in my new home and have got the wifi working fine with my BT Home Hub router (works for laptops, mobile devices etc)
Have been trying to connect via Ethernet for a laptop and home pc for a faster/more reliable connection but it doesn't seem to be working.

When plugged in the Network and Sharing Centre simply displays the loading blue circle with 'identifying' but no network access. When clicking on the Local Area Connection Status both IPv4 and IPv6 connectivity state no network access, but I can't seem to find any hardware problems on the laptop. The same issue occurs for other laptops at home and I know my laptop works with Ethernet at work.

Running ipconfig/all shows that DHCP is enabled (I checked this on the properties tab for the IPvs), autoconfiguration is enabled. I can add in a copy and paste of the whole ipconfig/all if that's helpful - 'media disconnected' shows for Tunnel adapters but I don't really understand what they are...

If anyone could help at all I'd be really grateful !

A:Cannot connect via Ethernet to BTHub3 Wireless Router - but wifi works

Could be that the router is only set to wifi.
go to your router setting page open it (192.168.0.1) check the settings there,
password is probably admin if you havn't changed it, please do change it if you havn't.

Or plan B reset the router

Roy

Read other 2 answers
RELEVANCY SCORE 58.8

Laptop running Windows 7 no wifi to Netgear48 Router I hope someone can help me with this problem please. A new Netgear 48 wireless router was set up some months ago. It works fine on 2 tablets, 2 cell phones (all Androids) and one desktop computer (Win7) All of these will work without the need to be connected to the router, however, my laptop running Win 7 will not connect to the web unless the Ethernet cable is connected between laptop and router when it then works without a problem. I have tried troubleshooting and this has failed to produce a solution and have then checked out the dependency services and got error messages which I cannot correct and really do not understand what they mean. I am aware that these three services are interdependent and if one of these is wrong the other two won't play nicely. However, these only appear to affect the wireless side of the router as no problems are experienced when wired up. These are the details: Peer Name Resolution Protocol Properties (On local computer)Service Name: PNRPservStartup Type: AutomaticService status: stoppedLog on as: Local System Account radio button selected the rest of the screen is emptyAllow service to interact with desktop blankDependencies: This service depends on Peer Network Identity ManagerThe following system components depend on this service: Peer Networking Grouping, PNRP Machine Name Publication ServiceRecovery: Not attemptedAttempted to start the service and got this error message:"W... Read more

A:Netgear48 wireless router ethernet cable reqd for laptop

Further to my earlier query, I have checked those dependencies again, this time with the router plugged into the laptop, I got internet connection as expected, but the same errors were still there as noted previously, whatever is preventing me connecting to the internet wirelessly, it cannot be in that area. When the previous router, a Belkin, was setup I used the desktop computer as the main one always plugged into the router with the laptops operating wirelessly. I do not know if this is important, am blundering around trying to find a solution without a clue what to do next. Any ideas?

Read other 13 answers
RELEVANCY SCORE 58

Hi All

Not a network expert so need a little help here!

I live out in the sticks so the only way to get an internet connection is through a white box radio receiver made by a company called Alvarion. It's stuck on the outside of the house and only has one wire protruding. This wire runs inside and ends in an ethernet connection. I've been using this to connect to the internet.

So far so good. But now I was hoping to be able to somehow turn this ethernet connection into a wireless connection.

I have a Thomson TG585v8 wireless router and was wondering if there is a way that I can use this? I tried just plugging the Alvarion ethernet connection into one of the Thomson's ports but this didn't work.

I read somewhere that I need to turn off the DHCP for the Thomson router but I can't work out how to get into the configuration menu to do so. If I connect the Thomson directly to my laptop and go to the default Thomson Gateway (192.168.1.254) it asks for a username and password and I can't get past this. I've already tried Administrator and a blank password and I've tried the Network Name and Wireless Key just in case, but to no avail. I reset the router but still no luck. I've also tried going to dsldevice.lan but. again, no luck.

Well, I may be wildly off track but if someone would be kind enough to steer me in the right direction it would be much appreciated!

Cheers,

Chew
 

A:Configure Thomson TG585v8 Wireless Router To Relay off Alvarion Ethernet

Read other 16 answers
RELEVANCY SCORE 53.2

Hi,

I have a linksys model wrt54gl v1.1 and I am using Windows Vista 32bit Home Edition. I have a pc connected to the router directly through an ethernet plus a laptop, 2 iphones and a blackberry that get wireless internet from it. 2 days ago wireless stopped working. The internet on the pc connected to the router by ethernet is still working and the power, WLAN, ethernet, and internet lights are all lit green. The internet and ethernet lights flash when data is being transferred but the the WLAN light is not flashing. I have restored the router to factory default but it is still not working. The phones and laptop are not detecting any wireless network present. Hope you can help.

Paul
 

A:Internet working on PC connected to router by ethernet but wireless not working

I have restored the router to factory default but it is still not working.Click to expand...

The only other thing to try is to unplug the router for a few hours. You could also try another factory reset.
 

Read other 1 answers
RELEVANCY SCORE 49.2

I recently bought a Netgear Wireless N 150 router (although I haven't set it up yet). One reason I chose it is that I was told it can be used as a wired network between our two desktop computers, and as a wireless access point for the laptop. But frankly, I don't always trust what the sales people tell me.

I've read on many sites that wired computers have some advantages over wireless, including security and speed, so I prefer a wired LAN for the main computers (they are within feet of each other and will stay that way). But I would like the convenience of going online via the wireless connection with my laptop in the other room.

I've never done this before (I always just had a wired connection between the 2 desktops and didn't bother going online with the laptop) and I need to know if this setup will cause any problems I should know about.

Please don't suggest I go wireless for the entire LAN -- I'm just too set in my ways to make that leap right now. If my planned setup won't work, I'll stick with my current one and forget the laptop.

Barbara
 

A:Solved: Can I use my wireless router as wired router & wireless access point?

Read other 8 answers
RELEVANCY SCORE 48

Is there a difference b/w a wireless router that will hok up to a broadband modem connection and one that will link to a cable modem connection ?

I was planning to buy the linksys wrt 54gs but i have a broadband modem which connects to the telephone jack at one end and to the rj45 jack on my notebook for which i also need to buy a nic card. is that the correct one to buy ?

Thanks !
 

A:Solved: Diff b/w wireless bb router and a wireless cable router

Yes. The key is the RJ-45 on the modem; you need a broadband router with a WAN ethernet port. That model will do fine. And you'll then connect the laptop to the router via wireless or a straight ethernet cable. You may need a cross over cable to go between the router and the modem.
 

Read other 2 answers
RELEVANCY SCORE 48

Ok lets get this started.

How you doing? Good? Great, glad to hear it.
How am i doing you ask? mmmm... at the moment... im a sad panda.

Now to the topic at hand.

Short version:
Im attempting to share my pc's usb wireless internet connection with a wireless router connected through my pc'sEthernet port. Is this even remotely doable?? I have done so much searching in the past few days that im starting to feel like im the only person in the english speaking world to have every attempted such thing. Hence.. the sad panda reference.

Why im even attempting to do such a ridiculous thing.

Short version:
Im broke and cant afford new equipment or even a used repeater. At least for the time being and probably for a while with xmass on the way.

The setup.

My friend lives across the street. We decided about a year ago that there was no real reason for us both to be paying for a 25mbs connection when we could split the bill and one of us could just use my self build usb wireless antenna. We both only have one computer so the setup was perfect.

The problem that has decided to show its ugly face is that another friend of mine is giving me his old droid. The cell phone not an actual android. At&t being the wonderful company that they are would like to charge me 25$ a month for 2g of internet access. This is when the cheep wad in me slammed the brakes and said, "no way dude, you dont even pay that much for unlimited 25mbs cable internet".

So the cheep wad in me... Read more

A:modem -> wireless router 1 -> pc -> cat5 -> wireless router? sad panda

Since we don't support sharing neighbor's wireless, we also don't help with problems trying to expand on that connection. Note that sharing like this is against the terms of service for your ISP. Think of it as stealing the monthly rental from the ISP.

Closed.
 

Read other 1 answers
RELEVANCY SCORE 47.2

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

A:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

Read other 1 answers
RELEVANCY SCORE 46

I am using a Netgear MR814 Cable/DSL Wireless Router to share a DSL connection. I have it upstairs connected to the modem and one computer. Downstairs I have four computers that need to be networked and have access to the connection. I have a D-Link DWL-810+ Wireless Bridge to communicate with the Netgear wireless router upstairs. I want to connect this wireless bridge to a Netgear RT314 Broadband Router. When I plug the Wireless bridge directly into one of my computers' ethernet ports I am able to connect to the internet. If, however, I plug it into the routers "Internet" port, I am unable to communicate with the bridge. Whenever I try to access the wired router's configuration utility(192.168.0.2) it asks for a password lets me access the main menu, but then I lose connection to the setup utility and have to reset the modem to be able to do the same thing again. This last issue only began to occur after I decided to plug the D-Link Bridge directly into my computer.

I realize that this is a rather extensive list of problems but help on any one of them would be great. I also realize that there are other ways to do this with different equipment, but different equipment is not free (The wired router was given to me) So if anyone knows anything that could get these working for me I would really appreciate it.

Thanks,
JT
 

A:Wired Router-->Wireless Bridge-->Wireless Router

Read other 10 answers
RELEVANCY SCORE 46

Recently I purchased a new wireless N router, and have moved the older wireless G router downstairs, where I hope to be able bridge a connection between the two. Google results, ironically enough, have suggested Googling instructions on setting such a thing up.

Connected to this computer (which is upstairs) is the new one, a Belkin Wireless N model no. F5D8236-4 Version 1. Downstairs the the old Linksys Wireless G model no. WRT54GS Version 6. I have a friend who works a lot with networking, who is skeptical of the idea, but Googling it has returned hope that it is possible. The main dispute is how.

Here's the setup: This computer is wired to the Belkin router, which is wired into the modem and is also currently hosting the house's wireless network. The Linksys is downstairs wired only to my Xbox 360. My attempts at even trying to find where to configure these routers have proved pathetic, so I've been driven here.

Could this work, and will it work with these two routers? If so, how do I go about it?
 

A:Solved: Wireless Router to Wireless Router Connection?

Read other 11 answers
RELEVANCY SCORE 46

I have a Netgear WGR614 v6 wireless router and a Westell VersaLink Model 327W modem/wireless router. What I want to do is use one of them to pick up signal from the other and use it as a wired router since my comps don't have wireless cards in them. Basically I would be using one of them as the wireless card and running ethernet cable to the comps from there. Is this possible, and if so how? I'm doing this because the connection point in the house is too far from where I want to put my computer. I am **not** trying to steal someone elses signal.

Very precise step-by-step instructions would be greatly appreciated.
 

A:Using wireless router to pick up signal from another wireless router

Read other 6 answers
RELEVANCY SCORE 45.2

I have a wireless broadband router (linksys WRT54G). I recently signed up for vonage, and got a VoIP router (linksys RT31P2), that doesn't have wireless.

Would it be better to plug in the cable modem to the VoIP router, then the
wireless router into the VoIP router:
Cable modem---VoIP router---Wireless router-----Computers
or to get an all-in-one VoIP/Wireless router like the WRTP54G:
Cable modem---VoIP/wireless router---Computers

Would there be advantages/disadvantages to either?

Thanks
 

A:Single VoIP/Router/Wireless combo or seperate VoIP and Wireless router

There would probably be less configuration hassles with the all-in-one solution. OTOH, you have a bit more flexibility with the two boxes, I currently have my Vonage adapter hooked to the LAN side of my router, caused too many glitches when it was between the modem and the router.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hi,

I've been searching around for a long time for an answer for this question but I cannot find a full relevant answer so please do bear with me.

I am university student and I get my internet via an ethernet cable from a socket in the wall.
I want to install a wireless router to get wireless for all my devices.

Can I plug the ethernet cable directly into any router and get an internet connection like that ?
Do I need a specific router? If so can you please point me in the right direction?

Also, will an Wireless Access Point do the job?

If you need anymore information, please do ask.

Thanks in advance,

Regards
 

A:Ethernet and Router

Read other 6 answers
RELEVANCY SCORE 44.8

So i'm trying to set up a D-link DIR-628 router,
I tried to use the included "quick setup" (hah) but it failed when trying to communicate with the router to install it.
I tried two computers and three different ethernet cables and all of the ethernet ports on the back of the router that are designated to connect to the pc. I've also tried resetting the router and restarting the cpu multiple times.
I then tried using the web-based configuration but when i type in 192.168.0.1 (whe address listed in the user manual), IE, firefox, and chrome all say that they cant find the webpage.
I've also tried to reset my ethernet adapter multiple times.
Whenever I plug in the router the link icons just start flashing
 

A:Cpu will not see router through ethernet

Whenever I plug in the router the link icons just start flashingClick to expand...

That doesn't sound good at all, but let's not jump to conclusions.

What is the brand and model of your modem?

Reset the router to factory default settings. With the modem and router unplugged and your computer shut down connect the modem to the router WAN (Internet, Modem) port and the computer to a LAN port. Plug in modem. Then plug in router. Then boot computer. You should now have internet access, or at least be able to login to the router (at 192.168.0.1). If not, please show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 44.8

Hi, first post so be nice

I'm currently living in a student dorm and they just provide us with an ethernet socket on the wall. Is there any routers out there that I would be able to use. By this I mean is there any routers that have an ethernet socket rather than an ADSL one?
 

A:Ethernet only router

Read other 9 answers
RELEVANCY SCORE 44.4

I have been trying to find a way to connect, forward the signal, recieve the signal from my Verizon Fios wireless router up to my WGT624 V3 Netgear router.

Is there a way that I can modify my wirless port on my Netgear to recieve a signal wirelessly from my Verizon Wireless router?

My Neighbor did it once with another wireless router, but he can not remember how he did it. I am thinking it had something to do with the Firmware.

If anyone can help me with this that would be great.

I'm basically trying to push the wireless signal from my Verizon router in my basement, up to my wireless Netgear router which is recieving the signal on the main level so that I can plug my wired (non wireless) laptop into the ethernet port which is receiving wireless signal from the Verizon router in the basement in order to gain access to the internet.

Can this be done with the equipment listed above and or some additional firmware and configuration?

Thank you for all your assistance on this in advance.

MCAMPOS526
 

Read other answers
RELEVANCY SCORE 44.4

So here is my case:

SETUP:

Verizon's Westell 6100:
Modem/Router, provides 1 incoming address (provided by VZ) and provides 1 internal address (192.168.1.1).

Netgear Wireless Router WGT624 v4:
Wireless Router, accepts 192.168.1.1 and provides 10.0.0.X wired and wirelessly.

Problem:
Although Verizon's Router indicates that it is on Bridge mode, the damn thing isnt. I thought the main concept of bridging was to become practically invisible and automatically reroute all traffic to the next device, which is what I want.
I want to ultimately use the Netgear device to set all my rules and settings, instead, I have to do it on both.
For instance, Xbox Live is not working 100% properly. I can only play video games without being able to join specific games, or perform any in-game video/voice chat.

I have tried NATing the device. No luck.
I have also tried setting the Netgear device as a Wireless Base Station. Either way, I just would like to have my network ignore 1 device, and have the second one invisibly reroute all the access.

Is that possible? Could you please help?

Thanks to all!
 

A:Netgear Wireless Router and Westell Modem + Router = Routed Bridge failure

Well, since the "modem" is supplying a private IP address, it's obvious that it's not in bridge mode, that can only happen with a NAT layer, aka a router.

Try this solution to configure it for bridge mode, direct from Verizon: http://www22.verizon.com/residentialhelp/highspeed/networking/setup/questionsthree/123756.htm
 

Read other 3 answers
RELEVANCY SCORE 44.4

Hope this isn't confusing but, my internet provider (my cable company) came in to set up a wireless modem/router when we upped our internet speed today. We have three desktop computers which are hard wired to our existing Linksys router which we have been using previously. Would it be in our best interest to turn off the wireless function of that router (it's hooked up to the new modem/wireless router so the hardwired computers can function since the new unit has no ports to plug in the desktop computers into). Our wireless devices are all 'connected' to the new modem/router (using its passphrase and SSID). Can the wireless capabilities of each interfere with each other? They are sitting right next to each other.
 

A:Solved: Internet provider wireless modem/router and my hard wired router

It's confusing to me, but can make two comments ...

a. If you are not using the wireless network of a router it's best to disable or turn off the wireless--saves electricity and should extend the life of the router.

b. Two wireless networks whose channel numbers are less than five from each other can interfere. In North America if possible use channels 1, 6 and 11 to guarantee non interference.
 

Read other 2 answers
RELEVANCY SCORE 44.4

Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gif
 

A:how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Ndhingra said:



Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gifClick to expand...


The easiest way is to run the CD that should have come with the Router, if you havent got it then you will have to configure it manually.

Full instructions can be found on the netgear website here.

Regards
 

Read other 1 answers
RELEVANCY SCORE 44.4

Hello,

I have an 8 port "wired" router from Linksys that I have been using in conjunction to a wireless access point which had been plugged into one of the open ports on the wired router. Lately I have been having connection issues with the WAP so I decided it may be time to upgrade. Not thinking about it, I picked up a new Linksys E1000 wiress router (as opposed to a WAP) and, after a lengthy support call with Linksys, got that up and running.

So I have operability for both wired and wireless devices, however I have noticed a substantial slow down on my wired devices. I also just upped the plan with my ISP to increase my bandwidth which I see on the wired PCs but not on the wireless which seem less. Would a WAP be faster than a wireless router by nature?

Any ideas? Thanks in advance
 

A:Slow wireless after connecting Linkys wirless router to Linksys wired router

Have you made sure you have the latest firmware for the wireless router? If you updated the firmware be sure to reset it to factory default settings and reconfigure it.

What speeds do you get with a test such as speedtest.net with a connection to the wired router? With an ethernet connection to the wireless router? With a wireless connection?
 

Read other 1 answers
RELEVANCY SCORE 44.4

Greetings!

I have subscribed to DSL and Teleco Video (cable) through my phone company. They provided the Westell Modem (Model #D90-740010-06). It has 4 ports but 3 goto the televisions for cable and the other is going to my personal computer.

I have a Compusa SKU:333628 wireless router I want to connect so i can also use my laptop.

my ISP will not assist since the connection works with model/personal computer with hardwired.

I thought I could just run a cable from one of the ports on the DSL/Router to the WAN port on my Wireless Router, however this did not work. So I ran a cable from one of the ports on the DSL/router to a regular ethernet port on the wireless routher (not the WAN) and I could hardwire both the desktop pc and wireless and connect to internet however the wireless would never work, my pc says wireless is connect but when I open IE or firefox it does not connect.

Can someone please help, I am going insane.

The following link will take you to the manual for my wireless router:

http://fmi.compusa.com/driver.asp?SKU=333628

and the following is the datasheet for the westell model/router

http://www.westell.com/images/products/ultraline.pdf

exact info on the dsl/router

Model Number D90-740010-06
Serial Number 07B402950053
MAC Address 00:18:3a:39:db:76
Software Version VER:4.03.02.02
Software Model 4 Port Gateway
Description WireSpeed Data Gateway
Boot Loader VER:... Read more

A:Westell D90-740010-06 DSL/Router + Compusa 54Mbps wireless router (SKU:333628)

You have 2 routers - they are both trying to issue IP addresses so it is not surprising that there is a problem. If you can disable DHCP on the wireless router it might work as a wireless switch or hub. It is worth a try.
 

Read other 7 answers
RELEVANCY SCORE 44.4

Hi al u guys

i have a simple question reguarding the range of any cheap $50 to $150 max wireless router when place outdoor... actualy i am thinking of making my own network of friends living in a single street of about 100 meters apart from my house at max... for multiplayer gaming and file sharing etc etc... as my house is in the center and its quite high amoung other houses i decided to place router outside on my roof at height... may be inline of sight of other house(provided i will take care of climate conditions) ..... and as for clients i dont want any instrument installed at client except wlans... at max i will make an extention for clients to place there antenas outdoors

now tell me wether this is practically possible or not under very limited budget.

tell me if i am unclear about some thing....

thanks in advance
 

A:Outdoor range of Wireless Router eg. (Linksys router wt54..) or anyother with 108

Read other 8 answers