Over 1 million tech questions and answers.

BSOD and windows crash Error: 0x000000F4 no crash files.

Q: BSOD and windows crash Error: 0x000000F4 no crash files.

Hello everyone I have been trying to fix my PC for the last two weeks. I've tried everything. Windows clean install a bunch of test on my hard drive. I've checked S.M.A.R.T done an 9 hour memtest and I;ve finally given up. I honestly don't know what to do this is a fairly new build done in June. I have the DM log files please anyone this is getting out of hand.
P.S I made this thread on my computer but when I am loading for a game or in the middle of a game computer gives me 0x000000F4 error no idea what it is :/ so far its only happened on league of legends.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: BSOD and windows crash Error: 0x000000F4 no crash files.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 88.4

I was running firefox with nnscript (but on regular settings) and trying to go to download some stuff, and the websites might have been on the untrustworthy side. But not sure, all I know is I went to a bunch of them and downloaded 1 file but pretty sure it's legit because i had the file before and file size matched exactly. Must have been the websites or something else. Anyways:

Error was Stop 0x000000F4 (0x00000003, 089E9FDAO, 0x89E9FF14, 0x80605628). I heard that you can identify the process that's being terminated based on these error codes, and also the terminating process. But not sure if you need the minidump or not to do that. If so, I don't know if I can get the dump because i don't think my settings in the startup and recovery, are set to do a complete memory dump, i think it's just set to the lowest one at 64k. And I can't get into safe mode to change it. Any ideas on what to do? I don't want to format, so it's like i'm looking to just eliminate the source of the problem after identifying it, or just do a reinstall of windows xp if that doesn't work.

As far as any recent changes goes, I did install a recent program, UTwarpix, it's some anti-cheat protection for Unreal Tournament, and it crashed my computer not to long ago. But i don't think that it's.

A:Blue Screen Crash Error 0x000000F4

*bump, okay i've done a million scans for viruses and chkdsk for disk errors. And even tried unplugging stuff and lowering memory speed. Pc still doesn't work. I tried an older harddrive and it worked, so it's definitely a problem with windows. But i can't do a repair install of windows xp, it blue screen right after copying files. So i'm stuck here.

Anyway to do a repair install in a different way, maybe just a way to replace all the necessary sys or driver files with the correct ones? :\ i really don't want to format.

Read other 2 answers
RELEVANCY SCORE 87.6

Blue Screen Crash Error Code 0x000000F4 (0x00000003, 0x81EBA020, 0x81EBA194, 0x805F9F88) This occurred while sitting idle. Had just completed disk defragmenter.

A:Blue Screen Crash Error Code 0x000000F4

Closest match I could find in Microsoft knowledge base.

http://support.microsoft.com/kb/330100/en-us

In plain english check your hard drive cables.

Read other 2 answers
RELEVANCY SCORE 86.4

I'm having issue with the a Windows 7 computer  randomly crashing and restarting automatically.  Upon checking the Minidump files, I see 5 instances where I get Critical_Object_Termination with error code 0x000000f4 and 1 instance of Kernal_data_inpage
with error code 0x0000007a.  The 5 instances seem to be related to wininit.exe and the 1 instance seems like to be caused by partmgr.sys.  I'm not sure how to read the dump file correctly, so I uploaded to see if anyone can help.  The link is
below. Thank.

https://1drv.ms/f/s!Av_9FrusT-F932-0KWtx8IeOJAMI

Read other answers
RELEVANCY SCORE 84.4

Hey,

My month and half old Acer V3 started to give BSOD's, did some sort of recovery and started working again for a couple of hours, if not trying to access any Windows files. If tried to look up error logs etc it gave different versions of the BSOF. So I tried to run Recovery, getting it back to factory settings, and that's when Windows crashed completely. I followed Acer customer support advice, ordered recovery discs (couldn't create one because Windows crashed when trying it. I got the recovery discs, ran the recovery which ended up giving me failure because of "missing image-something". Another call to Acer and they told to run different recovery version from the puter.

That recovery end to a failure again. After several restarts and what not, windows started up again, being slower than usual. I'm now having constant problems losing internet connection, I've had couple minidumbs and several issues with windows updater and such and these after machine should be back in the factory settings. Anyhow, here's the last log if anyone could take a look on it before I throw this machine to the wall.

A:BSOD and total windows crash and recovery crash/failure

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).



In particular, start with the hard drive diagnostics as I suspect that is the problem.

Although there's only 2 memory dumps (it usually takes 4 or 5 to conclude if it's a hardware error or not) - the repeated failure of factory installs makes a hardware failure the most likely problem here. Please run the diagnostics that I suggested above and let us know the results.

There are a list of drivers that need updating (because the recovery media was made a while ago). Don't worry about them until you've finished the hardware diagnostics. If all the diagnostics pass, then update the drivers.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NTIDrvr.sys Mon Apr 19 21:39:04 2010 (4BCD05B8)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
http://www.carrona.org/dr... Read more

Read other 5 answers
RELEVANCY SCORE 82

I have a PC with 2 x hard drives (150GB each). C: (boot) and D: drives. PC has been working perfectly for 3 years and then recently has been taking longer and longer to boot up (ie from powering on, through the windows loading screen to the windows log on page).

I run Windows XP Home Edition with Service Pack 2. Not helped by the fact that the PC is German and therefore XP is in German although all the programmes are in English. What this means is that you cannot load another language version of Windows over the top (I have tried with my official UK copy of Windows XP professional edition).

Having taken an age to load up Windows would then run normally before inexplicably crashing without warning to the ‘blue screen’ of death. Text is in German but error message is as follows:

STOP: 0x000000F4 (0x00000003, 0x852E0BE0, 0x852E0D54, 0x80604418)

PC then tries to reboot but gets no further than the manufacturer’s screen and before the diagnostics test / hard drive ‘run through’.

I ran a virus checker recently and the following programmes were deleted or quarantined as ‘harmful’:

PWS: Win32/Frethog.C

VirTool: Win32/Obfuscator.N

Now I may well have had a virus which has fuc*ed up something in the Windows registry / directory which is causing it to fail. On the other hand the drive may be overheating (I have taken the case off and checked the connectors, fans etc and it appears ok) or something else is causing the issue.

I can’t afford to junk the hard drive as it h... Read more

A:Windows XP crash:STOP: 0x000000F4 (0x00000003, 0x852E0BE0, 0x852E0D54, 0x80604418)

1.Navigate to c:\windows\minidump
2.Zip some of the recent minidumps and attach them here
 

Read other 1 answers
RELEVANCY SCORE 78.4

Need help with a BSOD error that is crashing my PC. Computer hadn't been used in a few days, but it started fine. After a few hours of idle time, I started iTunes and it was syncing my iPod. During this time, I started Nero, as I was going to burn a CD. I then loaded a blank CD, once that happened, the PC crashed.

Computer boots fine and I can get past login screen. After it logs-in, the start-up items begin to load, but then it crashes and the BSOD error appears. The following is shown:

"stop 0x0000008E (0xc0000005, 0x806FF94F, 0xB7FsDB18, 0x00000000)"

I can boot into safe mode. So far I've done the following, but it continues to crash:

1. tried system restore in safe mode, but system restore fails
2. used msconfig and disabled all items on the "startup" tab
3. disconnected all USB devices
4. used Memtest, all three sticks passed
5. ran WD diagnostics on C drive, drive passed

In safe mode, I checked the event manager, the only unusual item was an "SPTD" error. When I check on the error, it says "EventID 4 - driver detected an internal error in its data structures for."

I also checked the device mananger, the only unusual thing was a generic storage volume that was listed in the storage devices. It seems to be associated with my HP printer which as memory card slots. But I don't recall seeing a generic storage volume in Device Manager.

Any ideas on what my next step should be.
 

A:Help with BSOD error, windows crash at start-up

Read other 11 answers
RELEVANCY SCORE 78.4

Hello everyone,

I have recently dual booted my pre installed Windows 8 edition alongside Windows 7 Ultimate Edition on my laptop. I have solved the driver problem I had posted in a different thread on 8 Forums, but today a new problem came up. I was on my Windows 7 OS, when all of the sudden my screen blinked on and off for 5 seconds, and then when it was restored, there was a message from Windows Action Center saying that the display driver had crashed and then recovered. One minute later, my whole OS crashed with a BSOD, saying that the display driver had crashed and not recovered. I am currently using my Windows 7 in safe mode with networking. I do not have the error code from the BSOD, but I do have the diagnostics and dump files!

Thanks.

A:New Here... BSOD Error Crash on Windows 7 Ultimate x64

Hi.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us for any BSOD after doing it, following the Blue Screen of Death (BSOD) Posting Instructions.

No need to create new threads, upload the data in your reply post.

Read other 4 answers
RELEVANCY SCORE 78.4

at first i thought it was just me not having a genuine windows 7 in the first place but i did buy windows 10 and i got a key and the same error has been happening over and over
the BSOD keeps coming up with 

KERNAL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQL

 
 
tell me if you see anything wrong (mostly space
Specs
OS: Windows 10 Pro
Ram: 8GB
HD: 1TB
Processor: Intel i5 4670k @ 3.4 ghz
Graphics: GeForce 750 ti
?'s may be answered
x64
Windows 7 Ulitmate Original Install (wasn't genuine)
Windows 7 Ultimate Original
1 year and a quarter
1 day (windows 10)
motherboard (will find out)
Custom built
desktop

A:WINDOWS 10 CRASH FATAL ERROR/BSOD!!!!! HELP!!!!

First question is how did the Win7 install become legitimate?If the hacked version is still present this could be causing problems. Your UEFI/BIOS (version P1.30) dates from 2014.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.  WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.The WER section of MSINFO32 blames your wireless drivers.  Let's see what the memory dumps have to say.....The memory dumps blame it also.  It dates from 2011, so it's likely not compatible.Go to the manufacturer's website and download the latest, Win10 compatible driver and install it.If a Win10 driver isn't available, you may try a Win8.1 driver (and run the installer in compatibility mode) - but there's no guaranty that it'll work.Worst case - remove the wireless card software, then physically remove the device from the system.If you must have wireless, then invest in a wireless card that's certified Win10 compatible. If this doesn't fix the BSOD's, please run Driver Verifier according to these instructions:  http://www.carrona.org/verifier.htmlGood luck! Analysis:The following is for informational purposes only.[font=lucida console]***********************... Read more

Read other 1 answers
RELEVANCY SCORE 78

Hello,

Is there I can find out a list of the programs that were open on my taskbar before my computer crashed? I tend to have lots of documents open (esp. text files I'm reading - i.e. not editing - for research purposes) and when my computer crashes or is forced to reboot, the only way I can guess which files I had previously open is by doing a Windows file search for files accessed in the past few days.

This doesn't always help - esp. as I hibernate my computer lots and files may be open and unchanged for several day.

Sometimes, when I'm about to crash, I quickly take a screen-dump of my taskbar or the task manager list of programs so I know which windows/files I had open... but isn't there a log of some sort somewhere containing information on which files were active at a particular time, just before a restart or system crash?

(I don't mean the program that caused the crash; I know I can find out about the crashing program from event viewer. I wanna know about all the OTHER program names I had open at the time. And I don't just want to know they were called 'notepad.exe', 'winword.exe' - I want to know the actual files opened up at the time of the crash. In short, I want the information I can get if I photograph the tabs on my taskbar just before a crash. We're talking about already-saved notepad files, photographs etc. that are open on my screen just before a restart.)

Any tips on whether Windows has this information somewhere? Are there any logs that... Read more

A:Post-crash/reboot, how can I find out what files I had open before the crash?

Hi esinohm and welcome to TSF !

Several MRU (most recently used) lists are stored in the registry, but you won't find a single list with all the programs that were opened at a given time.

http://windowsxp.mvps.org/RegistryMRU.htm

This article discloses the location of the MRU lists for office documents :
http://support.microsoft.com/default...b;en-us;826208

Latest opened and saved files will also appear in the recent document menu in the start menu. There's a setting that allows you to see recently opened documents in the start menu properties : right-click the start menu => properties => customize next to start menu => advanced.

Have you tried investigating the reasons of the crashes ? Could be a single hardware problem. I can usually leave my computer on for a whole week without any crashes.

What are your system specs ?

Read other 3 answers
RELEVANCY SCORE 77.6

Hello,
I'm having a problem with my computer. I built it myself and overclocked it not too long ago maybe about 5-6 months ago. It passed all the stress tests fine when I overclocked and it was running great but after about 2 weeks later it started to bluescreen once in a while and since then it's been bluescreen. I noticed that when it's cooler in my room, it doesn't bluescreen as often but usually it bluescreens ones a day. Before it displays the BSOD, it freezes for about 10-15 seconds then BOSD shows up. Now for some reason its not creating the error log in minidump folder. I even have the correct settings but it still doesn't create the logs. So I decided to take a picture with my cell phone. It does blue screen even if I'm not playing any games. I'm using h60 water cooler and I got i7 2600K overclocked to 4.6. Any ideas? Please help because I cannot figure out what the problem is.

Thank you in advance.

A:BSOD Random Windows 7 Crash, error 0x00000124

The stop code 0x124 is normally indicative of hardware failure, there is not much information that it provides, but I can tell you right now from the sounds of things it is being caused by your overclocking and is likely crashing so hard that it does not have time to generate the needed dump files. Chances are all you need to do is stop over clocking and return your system to its normal speeds to rid yourself of this problem.

Read other 1 answers
RELEVANCY SCORE 76.8

Hey all,
I'm having an issue with my ASUS F5GL laptop. If I try to launch a game like Counter-Strike: Source, Garry's Mod or Just Cause 2, not long after actually leaving the menu and beginning to play (anywhere between 2-5min), the whole laptop just silently crashes. I checked ALL the logs, and there is nothing in there, except something recorded at boot, saying the computer was not cleanly shutdown. When it does crash, a second before it crashes, a weird thin horizontal line appears in a random location on the screen, going all the way across the screen. This was happening under Windows Vista, but I just bought and did a clean install of Windows 7 Home Premium, and it's still happening. I have updated my drivers and it still happens. Laptop info is below (caution, large block of text)

Code:
System Information report written at: 04/21/11 15:41:47
System Name: BODENEAMONN-PC
[System Summary]

Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name BODENEAMONN-PC
System Manufacturer ASUSTeK Computer Inc.
System Model F5GL
System Type X86-based PC
Processor Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz, 2167 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 214, 16/03/2009
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C... Read more

A:Complete system crash (no BSOD or crash dump) when trying to launch most games.

Hello

You can try these to see what is going on with the overheating.

Core Temp

CPUID - System & hardware benchmark, monitoring, reporting

Read other 4 answers
RELEVANCY SCORE 76.4

Had my system for a while. recently upgraded all my drivers due to issues with bsods and crashing ive seen. ran maleware bytes, did scans from my iobit advanced system care.   took apart and blew out my computer. etc etc. done a few things all in the attemtp to try and get my computer back to normal running and have no sucess. i did run a memory diognostic and it says there was some memory issue's but i wasnt sure as to what to do next.
if anyone could help i would be theroughly apreciative.
as for what some of my problems are.
Random blue screen of deaths. with what look's to be rainbow-ish screen tearing right before (video card issue?)
some program fail to start. or while starting Crash/crash while useing them.
some programs that have NEVER had issue's suddenly  become unusable due to above reasons even after sucessfull reinstall's.
*edit:1*
another issue though uncommon is Explorer.exe fails to work and needs to restart it's self.
 

A:Random Bsod's, programs failing to start/crash/bug crash etc

You need to replace the ram.

Read other 1 answers
RELEVANCY SCORE 75.6

Hi. I've recently been trying to play Metal Gear Solid 5 but every time I boot it up my PC either crashes as soon as the splash screens are done or after a few minutes. It's been crashing while playing other games as well but it's been much rarer. It's not a BSOD crash and it doesn't produce any crash dumps so I'm leaning towards it being a problem with either the PSU, the motherboard or one of the graphics cards. Any help with finding the cause of this would be appreciated.
 
The PSU model is fd-psu-newt2-800, the graphics cards are both Nvidia GTX760s and the motherboard is a ASUS Sabertooth Z77

Read other answers
RELEVANCY SCORE 75.2

Hi: Have a brand new install of XP SP3 on a machine that is 95% an old machine of mine with a new Seagate hard drive. Keep getting BSOD with the following stop code: Windows XP crash:STOP: 0x000000F4 (0x00000003, parameter, parameter, parameter). A search turns up any number of potential causes. I have attached a zip of the minidump files. Can anyone provide some guidance? Thanks.

Update: Accidentally hit "solved" for this post. Still need a hand. Thanks.
 

A:Windows XP crash:STOP: 0x000000F4 (0x00000003, parameter, parameter, paramete

Read other 6 answers
RELEVANCY SCORE 74.8

This is a new build and I've had these errors at totally random times. From right after boot to anytime along the way. The worst part is that I can't get any crash dump info..no matter what I've tried. Pagefile is big enough and the dumps are enabled. I'm pretty much a novice with just enough knowledge to assemble my machine and get it running...IF there are no real issues!

I'd really appreciate any help! Thanks!!

A:Random 0X000000F4 errors and no crash dumps written.

There are no dump files present:

Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 74.4

? OS - Windows 7 Home Premium
? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM Version
? Age of system (hardware) Roughly a year and a half
? Age of OS installation - have you re-installed the OS? Nope
? CPU - Intel Core2Duo P8600 @ 2.40GHz each
? Video Card - ATI Mobility Radeon HD 4570
? MotherBoard - Not sure where to find this out.
? Power Supply - Dell AC/DC adapter 19.5V output

Ok so, I was browsing the web when my laptop suddenly restarted - on restart was greeted by a small blue square saying something like..."there is a problem, check newly installed hardware or software etc." and a line saying starting memory dump...100, i figured it for a virus at first so i restarted.

Used CCleaner to check programs opening on startup and found a few .exe's which i didnt recognise - coming from AppData/Local/Temp etc. So ran a full malware check with MalwareBytes AntiMalware - returned one of the files and removed it and i deleted the rest. On restart computer seemed to be fine - continued to work for the rest of the evening. Turned on in the morning and the same blue screen greets me, I restart again, safe mode, and check for viruses - nothing.

So I let the blue screen continue, dumps the memory and restarts. Seems to be working fine then after 20mins of browsing - blue screen again and crash. Backing my computer up now an... Read more

A:BSOD - Crash on launch and Crash while running

Hi -

Remove Daemon Tools/ Alcohol 120.

If BSODs persist, run the Driver Verifier -- Driver Verifier - sysnative.com


Windbg Logs
--> http://sysnative.com/bsod2011/jcgrif..._jcgriff2_.txt
--> http://sysnative.com/bsod2011/jcgrif...riff2_.txt.zip

Regards. . .

jcgriff2


`


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Jan 14 03:58:08.997 2011 (GMT-5)
System Uptime: 0 days 0:02:08.622
Probably caused by : ntkrnlmp.exe ( nt!ObpQueryNameString+4ed )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: conhost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!ObpQueryNameString+4ed
Bugcheck code 0000000A
Arguments fffff8a0`0328703e 00000000`00000002 00000000`00000001 fffff800`02570901
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Jan 14 03:54:45.960 2011 (GMT-5)
System Uptime: 0 days 0:18:43.662
Probably caused by : win32k.sys ( win32k!MultiUserGreCleanupHmgOwnRemoveAllLocks+a1 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: eventcreate.ex
FAILURE_BUCKET_ID: X64_0xA_win32k!MultiUserGreCleanupHmgOwnRemoveAllLocks+a1
Bugcheck code 0000000A
Arguments 00000000`10000220 00000000`00000002 00000000`00000000 fffff800`02edb436
??????????????????????????????????????????????????????????????????????????????????????``
Bui... Read more

Read other 9 answers
RELEVANCY SCORE 72.8

Hi,
Before you shoot me, I want to say that the default way to post the info about my BSOD crash, doesn't work. I cannot get the perfmon/ report started, even with it enabled in the services.

I had several crashes, but I found out why : because of a bad driver for my sound device tascam us-800. they are developing a new driver now for that.
but suddenly my system crashed again! no us-800 found, could you please help me with this one?
I posted minidump file of today in a zip as an attachment.

Thx!

martin

A:BSOD Crash - minidump files

BSOD caused by Peer Guardian and a software from FsPro, please remove these software
Update your Pinnacle Marvin Bus Driver http://www.pinnaclesys.com/PublicSit...viewDownload=1

Code:
MarvinBus.sys 0x92e6b000 0x92e99000 0x0002e000 0x43347105 24/09/2005 01:17:57
Update your Creative Webcame driver http://support.creative.com/Products...aspx?catid=218

Code:
OA004Ufd.sys 0xac449000 0xac46c520 0x00023520 0x48450f2e 03/06/2008 13:30:22
OA004Vid.sys 0xac407000 0xac448dc0 0x00041dc0 0x48807d97 18/07/2008 15:25:11

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F5, {6d, b096ef50, b096ef20, 0}

Unable to load image \SystemRoot\System32\Drivers\FSPFltd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FSPFltd.sys
*** ERROR: Module load completed but symbols could not be loaded for FSPFltd.sys
*** WARNING: Unable to verify timestamp for pffilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pffilter.sys
Probably caused by : FSPFltd.sys ( FS... Read more

Read other 9 answers
RELEVANCY SCORE 72.8

Hi,

I would be most grateful if my attached files could be analyzed for the repeated BSOD events I am experiencing. This morning I have already had seven blue screens. This has been a problem for a few weeks but usually only occuring once every couple of days. Now it is far worse.

Here are the details as requested:


? OS - Windows 7
? x64
? What was original installed OS on system ? Windows 7
? OS is an OEM version.
? Age of system (hardware) ? 1.5 years
? Age of OS installation - have you re-installed the OS? Not applicable.

? CPU ? Intel Core i7 2600
? Video Card ? AMD Radeon HD 6570
? MotherBoard ? Packard Bell extreme M5850
? Power Supply - brand & wattage ? not sure.

? System Manufacturer ? Packard Bell
? Exact model number ? ixtreme M5850

The BDOD events occur seemingly at random, but I do have a browser open most of the time, typically Firefox (14.0.1) which is repeatedly crashing itself so I have switched to Chrome. That said, sometimes the BSOD occurs straight after bootup, before launching any programs.

Anyway, any advice would be hugely appreciated. Many thanks in advance.

Regards,
David

A:BSOD crash files submission

Hello and welcome to TSF!

Three attached dumps, two mentioning memory management and one memory corruption. Both of these tied together usually indicated memory issues, but it can be driver related as well. First off though, I'm going to recommend running Memtest86+

Memtest86+:


Quote:




Download Memtest86+ here:





Quote:





http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing t... Read more

Read other 6 answers
RELEVANCY SCORE 72.8

This Microsoft software will allow the reading of crash Dumps. Simplifying the issues with Blue-Screen driver/hardware exceptions, and providing the data necessary for resolution for the problem(s).

To use it Run the executable as "Admin", Click "file" and "open Crash Dump" navigate to the Windows\Minidump file (or other location)

Vista x64 systems:
http://www.microsoft.com/whdc/devtoo...tall64bit.mspx

Vista x86/XP:
Install Debugging Tools for Windows 32-bit Version

note- for futher info on overriding the default Install location and setting dump files for default handling by the debugger (advanced Users) see:Crash Dumps - Analyse Bugcheck and Process
Any questions/advanced dump file analysis/troubleshooting/Install/default handling Issues should be directed to the Tutorial for proper resolution.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Step 1
Download the debugging tool for your system

Step 2
Override installation/or Install to default Location

Step 3
Create symbol cache folder

Step 4
Set the debuggging tool path for for the symbol cache
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



Download the debugger package that matches YOUR machine's... Read more

A:Reading BSOD crash files

You need to set the symbol path before the debugger can provide useful feedback on what it finds in the dump.

http://www.vistax64.com/general-disc...tml#post988457

The same procedure also works on user-mode crash dumps. It's not limited to BSoDs.

Read other 9 answers
RELEVANCY SCORE 72.8

I got an IRQL not less or equal BSOD last night. I was shocked to say te least. I've been using this syetm for at least a year in this exact physical configuration with not a lick of trouble. I was so taken aback that I did not notice from the information provided where the crash files were dropped. All I can remember is that there are two: one somewhere in the bowels of my Documents and Settings\User\Local\.... and the other somewhere in one of the Windows subdirectories. I looked in Windows\MiniDump but there was nothing with the correct date. I even did a seach of my entire C: directory looking for files Modified yesterday but nothing obvious showed up.

Where would these files be located?

A:Where are BSOD crash files stored?

They should be located in the C:\window\minidump. Make sure that you have set your system to create minidump correctly. Does the BSODs occur frequently? Please check the "Set minidump" below to make sure that you have set system to create minidump in appropriate way.

Code:
Windows 7:
Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that "Automatically restart" is unchecked
Under the Write Debugging Information header select "Small memory dump (64 kB)" in the dropdown box
Ensure that the Small Dump Directory is listed as "%systemroot%\Minidump" (without the quotes)
Click OK twice to exit the dialogs, then reboot for the changes to take effect.
Also, make sure you don't use program such as CCcleaner, because they might clean out your minidmp folder anytime

Read other 9 answers
RELEVANCY SCORE 72.8

hi

i have a computer network at home here, and my computer has been crashing a lot lately (a sep. issue); i was working in ms word right before it crashed (the file is from another computer within the network); after i got my computer back on, when i tried to access the files, it says that the file is being in use and whether i want to open as readonly; what causes that? plus, before my computer gave me the blue screen of death and crashed, word used to be able to recover documents one time if it crashed; now it doesn t have that option; please help.
 

A:can't access files after bsod crash

The server might think the file is still being used by you. You might have to open it and then save it using new name.

Now for word, try renaming the normal.dot file. If that doesn't work try the detect and repair under Help. Ieither way rename the normal.dot
 

Read other 1 answers
RELEVANCY SCORE 72.4

Ok, so normally I can fix most any bug on my computer, and it's not a big deal for me.... But this one sucks and it has been a problem for about a month now. I have tried over a dozen different "fixes" from over 8 different blog sites with no real solution to my problem. I am running Win7 home premium w/4Gig ram, Intel i3, on an Asus U50F.
Here is a run down of what happens:

I log on, windows starts normally, windows runs for about 3-5 minutes with nothing wrong and then freezes. The mouse is still movable but cannot open or close anything. If task mgr is up and onscreen, it will also freeze. I have to hard-boot the system every time. I am currently operating in Safe-mode w/networking just to get on the web, or do anything. Safe-mode runs fine I just don't want to use it forever!

Below are the processes running at the time of crash:

Name Usage Path

svchost 24 C:\windows\system32\svchost
sys idle 24 --
Trustedinstaller.exe 19 C:\windows\servicing\Trustedinstaller.exe
coreserviceshell.exe 19 C:\Programfiles\TrendMicro\AMSP
\coreserviceshell.exe
system 05 C:\windows\system32\ntoskrnl.exe
searchindexer.exe 03 C:\windows\system32\searchindexer.exe
mbamservice.exe *32 02 C:\Programfiles(x86)\malwarebytes'
antimalware\mbamser
taskmgr.exe ... Read more

A:Windows 7 crash after 3-5 mins / Incl: Process list & full current HJT log @ crash.

Hi Indyspark and welcome to TSF,

None of the processes sticks out, and are perfectly fine where they are.

Could you access the event log and see if there are any faults around the time that this issue appears? If so, what faults do you receive?

You could try running a "sfc /scannow" and a system repair aswell as restoring to a previously known working restore point, just as general "fixes".

Read other 2 answers
RELEVANCY SCORE 72

I have got the error for Windows 7 64bit irql_not_less_or_equal I have got the dump files for error 0x0a please help soon because I have gta v and its hard to play with the frequent crashed thanks.

Crash files
 

A:BSOD Crash 0x0a I have got files to upload

When you can, check the hard drive by going to Computer, and right-click on the C drive. Select properties, tools, check now. Put a check mark in both boxes to set a disk check on the next start up. Use Memtest86 version 5.01:
http://www.memtest.org/
Run it when you can for at least 7 passes. Any errors mean trouble
 

Read other 5 answers
RELEVANCY SCORE 72

Could someone advise me how I should proceed?I am partway through cleaning my PC from various hijacksbut because IE crashes I cannot get windows update andcannot run any online scans. Trend Micro does supportFirefox, but that also does nothing, ie Firefox onlyshows "transferring data" and never gets to theLaunching House call button.IE crashes on all these scan sites:bitdefender.comhousecall65.trendmicro.compandasoftware.comIE does not crash on other sites, such as news.bbc.co.uk ortiscali.co.uk .I have followed these steps (after searching Help Topics for CnsMin and 3721)in Preparation Guide for use before posting a HijackThis Log:1 and 2 done3 Clean out your temporary internet files and temp files. 4 ran latest Spybot with latest definitions, both normal mode and Safe Mode with Ad-Aware normal mode5 Online scans all tried and failed as IE crashed on each site Ran AVG (Grisoft)6 McAfee Stinger ran - nothing found7 Microsoft firewall was already enabled8 Windows updates crashes in IE 9 HijackThis ranMy brother, who is helping me via email, has sent me instructionshttp://www.spyany.com/program/article_spy_rm_CnsMin.htmlon removing CnsMin, but the registry editor instructionslook behind my abilities.This site explains the CnsMin in detail but does not offerany removal instructions:http://www3.ca.com/securityadvisor/pest/pe...px?id=453072511Should I post a HijackThis log anyway (in the right forum of course),or should I try something else?I know I've had CnsMin s... Read more

A:3721 Cnsmin And Other Infections, Oe And Ie Crash, Windows.update Crash

CnsMin has an uninstaller which removes most components, but leaves the machine with no network or Internet connection. I suggest you post your log in the Hijackthis forum.

It may take a while to get a response because the HJT Team members are very busy. Please be patient as they are volunteers who will help you out as soon as possible. Once you have made your post, please DO NOT make another reply until it has been responded to by a member of the HJT Team. Generally the staff checks the forum for postings that have not been replied as this makes it easier for them to identify those who have not been helped. If you post another response, a team member, looking for a new log to work may assume another HJT Team member is already assisting you and not open the thread to respond.

Read other 1 answers
RELEVANCY SCORE 70.8

I have a BSOD 124, and 101 (Not 121). Intel 4790k, 32gb of Corsair Dominator Platinium, Corsair h100i, Corsair 540 air, 1200 watt corsair PSU, Dual 780ti SLI, Z97-A asus Mobo. This came completely out of the blue. I suspect the newest windows update may be the culprit. Nothing triggers these crashes. It'll run beautifully with BF4 and Dying light on Ultra for 8+ hours... but when I turn it on again, I'll end up locked out with no crash. Or, I'll have a freeze, then BSOD. But the drivers ID'd by my third party software are saying that HAL.DLL, ndis.sys, and ntoskrnl.exe are flagging. Each crash report also ID's Genuineintel. Tried everything so far, windows repair, all drivers updated, all physical connections checked, re-seated every component, flashed bios, etc. I also re-did my thermal paste, and my CPU is idling between 30-33C. However, it will randomly jump to 40C. I'm pretty computer literate, but very much so out of ideas at this point. I'd like to avoid reinstalling Windows 7 Home edition premium if possible. I have all the crash reports available, and I will be monitoring this closely for replies. Thank you very much in advance for any and all suggestions/help! Also, yes my computer has an incredibly silly name due to a friend helping me name it.

A:BSOD 124 & 121 randomly after Win7 Update. Crash files included.

0x124s are usually generic STOP codes pointing to a hardware failure although they rarely tell you which hardware is failing. Lately we've seen ESET causing 0x124s so I think it would be best to follow the steps below then test the system.

Uninstall ESET and Install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.


Uninstall Daemon Tools, a proven cause of BSODs.

1. Uninstall Daemon Tools via Add/Remove Programs.
2. Download the SPTD standalone installer and perform the following steps.
3. Double click the executable to open it.
4. Click the button shown below.



   Information
If the button it is grayed out as shown in the image, there is no more SPTD installation on your system and you can just close the window.
Uninstall all of the ASUS bloatware on your system bar AI Suite.

Test the system and report back.

Read other 4 answers
RELEVANCY SCORE 70.8

Hey all

Some time ago i installed windows 10 using an iso, i immediately hated it and came back to 7. Ever since then, i've suffered with almost daily BSOD and it mainly seems to be when i'm using processor heavy audio programs, mainly Serato.

When I analyze the audio files, it has an processor load display and within a few seconds, this stays at critical. Now if i had a 2gb of ram, i could understand but my pc far exceeds minimum specs for all programs i use so i'm not sure it's ram related - ramcheck didn't show any problems either.

anyhow, i've tried using Whoscrashed and it tells me that there are no dumps and they are enabled. When the PC bluescreens, it rarely restarts on it's own, just shows its collecting info for the dump, after 2 hours i figured it's probably not doing anything, reboot and all is fine until the next bsod event.

I've replaced the HDD and checked voltages etc and they all seem pretty rock steady, likewise with temps. Somebody mentioned the page file but i have no idea how to check it, to increase it or anything else related - and given that i believe it's recommended that it's double the size of the installed ram, I'm gonna need 64gb of HDD space just for that!

At a bit of a crossroads, i'm pretty sure it's driver related hence the whoscrashed purchase but without the pagefile i'm not sure where to go from here.

Any help be much appreciated.

Stool

Read other answers
RELEVANCY SCORE 70.4

Hello all...

This other day my computer crashed and rebooted while I was surfing the net. When Windows was back on, it gave me this message: "One of the files containing the systems data in the registry, had to be restored from a log or a copy. The restoration was completed" (Please note it might in fact have been a slighty different message, as I'm translating it from danish to english - but I think it's pretty close).

Ok well... I recently run a couple of disc-defragmenting because it had been negleted for a while, Also about a week ago I was helping my cousin finding some basketball pictures through google for school work. Some of the links for the pictures instead ended up showing hose annoying pop-ups about "Oh darn... You have like a bazillion malware files - Click "Ok" to abort this very effective scan. or "cancel" to continue etc.". Well later that day I ran every Antivirus, Antimalware etc. I had: Spybot, Ad-aware, eTrust, Spywareblaster, Malwarebytes and Spyhunter... The 2 latter I just installed, suspecting my normal programs weren't doing the trick. Spyhunter found a number of "issues" in the registry - "hkey_users\default\software\microsoft\windows\currentversion\internet settings\zonemaps\escdomains"... Surfing a bit around on the web and in the registry it seemed it was something created by Spybot. I deleted Spyhunter and ignored the "issues". I was going a bit through the re... Read more

A:XP crash, icons & files missing, chkdisk error!

Read other 14 answers
RELEVANCY SCORE 70

Hello,

My problem started a couple days ago while using my computer as normal. A blue error screen comes up at seemingly random times and my computer restarts. Ive updated my system drivers and taken advise from several forums but nothing seems to resolve the problem. The error message doesn't seem to occur while in Safe Mode.

I have an HP G60 Notebook PC and I'm running Windows 7 Ultimate x86, upgraded from Vista about 8 months ago.
CPU: AMD Athlon Dual-Core QL-64
VC: NVIDIA GeForce 8200M G

Some information from the error message,

DRIVER_IRQL_NOT_LESS_OR_EQUAL

STOP CODE: 0X000000D1 (0X00000030.00000002.00000000.0X906738A5)

***athr.sys***
 

A:Solved: BSOD Crash Error.

Read other 8 answers
RELEVANCY SCORE 70

Ran CPU, GPU, Memory test NO Errors. When in IDLE in Win no problems but when I start for example playing some game there is an random crash, just black screen and then restart. I have new CPU, GPU, Power Supply, Main Board.

- x86 (32-bit) or x64 ?
x64
- the original installed OS on the system?
Win7 x64
- an OEM or full retail version?
full retail version
- What is the age of system (hardware)?
except HDD all less then 2 weeks
HDD about 3 years but no prob appeared.
- What is the age of OS installation (have you re-installed the OS?)
about half a year.






Quote:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2011-04-20T08:34:16.636821100Z

EventRecordID 252276

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Slimak-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0


Thx for help

A:error 0x8000000000000002 even no BSOD just crash

Have you checked the temperature of the video card?
Have you tried taking the card out and re-seating it in the motherboard?

Can you go to C:\Windows\LiveKernelReports\WATCHDOG and copy a couple of the files from there and upload them here?

Try running a video card stress test
Video Card - Stress Test with Furmark

Read other 2 answers
RELEVANCY SCORE 70

Hello, for the past couple of days, I have been getting random BSODs (usually while gaming). I have attached the log files.
I ran Windows Memory Diagnostic, and it told me that I had a hardware issue, however I ran HDI Memtest and Memtest86 for several hours without any issues, so I assume my RAM is fine.

Please note that there are only two dumps relevant to this issue (dated 7/5/2015 and 7/6/2015) because I did a system recovery rollback on 7/6 in order to see if it would help the problem, so all dumps before that have been erased.

Thank you so much for your help!

A:BSOD Crash Error 0x0000000a

Hi ken1988,

Welcome to the 8forums.
Although I'm pretty new to this, I'll try to help you out.

Because you already checked your RAM there is for now only 1 thing to do, updating drivers.
Please update following drivers:

Code:
Realtek HD Audio driver
MBfilt64.sys Fri Jul 31 05:40:32 2009 (4A7267B0)
Realtek

nVidia Streaming Kernel service
NvStreamKms.sys Mon Jan 12 18:56:42 2015 (54B40ADA)
Please check following link for a possible fix:
https://forums.geforce.com/default/t...ezing-your-pc/



The following is for information purposes only.

Code:
The following information contains the relevant information from the blue screen analysis:
**************************Mon Jul 6 18:09:26.849 2015 (UTC + 2:00)**************************
Windows 8 Kernel Version 9600 MP (8 procs) Free x64

System Uptime:0 days 0:13:57.647

Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CloseLocalAllocation+501 )

BugCheck 1A, {403, fffff680001de3e8, d6f00001a1af886f, fffffe80001de3e8}
BugCheck Info: MEMORY_MANAGEMENT (1a)

Arguments:
Arg1: 0000000000000403, The subtype of the bugcheck.
Arg2: fffff680001de3e8
Arg3: d6f00001a1af886f
Arg4: fffffe80001de3e8
BUGCHECK_STR: 0x1a_403

PROCESS_NAME: ffxiv_dx11.exe

FAILURE_BUCKET_ID: 0x1a_403_dxgmms1!VIDMM_GLOBAL::CloseLocalAllocation

CPUID: "Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz"

MaxSpeed: 2600

CurrentSpeed: 2594

BIOS Version 1.03.05aRLS1

BIOS Release Date 01/23/2015

????????????????????????????????... Read more

Read other 1 answers
RELEVANCY SCORE 70

HI,

I am getting frequent BSOD. I am attaching the zip file for your analysis.

A:BSOD crash with error 0000007f

Hello Sushant !

First of all, you update your network drivers, and update your indows. Most probably you dont have SP1 installed ?

Are you overclocking ? If so, get back from any overclocking.

Test your RAM . RAM - Test with Memtest86+

Upgrade your AMD graphics drivers, too !

Read other 1 answers
RELEVANCY SCORE 70

Hiya,

Just been told to repost this with updated information: I'm having problems with my [COLOR=#0072BC ! important][COLOR=#0072BC ! important]computer[/COLOR][/COLOR]. Inexplicably, my dad tried to log on earlier and upon logon he got BSOD, with the error being cited as IRQL_NOT_LESS_OR_EQUAL. I'm no expert, so I tried to do a system restore, which didn't help at all. Initially, I couldn't even load it up in safe mode without getting BSOD'd, but now it has for some reason begun to work in safe mode. I've been reading around this error on my laptop and it seems to happen when there's a driver inconsistency or you've plugged something in - neither of these have happened.

One time, I got it to work for a short while, but my inet browsers weren't working, and after putting on music for 20 secs or so, I got another BSOD, this time reading SYSTEM_SERVICE_EXCEPTION.

I ran sfc /scannow as admin in cmd but it found no errors, apparently.

I've attached all the data from the minidump folder. I don't know if anyone can use it to help me - if there's something else you need I'll try and get it.



Thanks very much in advance for any help - I'd really prefer not to have to reformat so much appreciated!

Alex

A:Double BSOD Crash Error

Hi alx91,
Can you do chkdsk /f in command prompt?
Here's how you do it:

1. Go to Start Menu, type in cmd and hold CTRL+SHIFT+ENTER
2. Type in chkdsk /f and press enter
3. It'll ask you to restart your computer, let the computer restart.
4. When you see something like this:

Don't press any key and let it scan the system.
5. Hopefully, once it's done scanning. It will restart automatically.

Let me know the results.

Probably caused by: Ataport.sys

Read other 9 answers
RELEVANCY SCORE 70

Hi,

I am trying to find a permanent solution to this crash that happens always when I start up the Windows 7. The BSOD, when it happens, is all grainy and scratchy and impossible to read.

Following is error report I get when I startup in safe mode.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 6153

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88005DC8024
BCP3: FFFFF88002FBD998
BCP4: FFFFF88002FBD200
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

The BSOD has never recurred when I reboot in safe mode with networking. Could someone explain what the problem is and how this can be resolved?

A:BSOD Crash error 1000007e - HELP!

http://www.sevenforums.com/crashes-d...tructions.html





Quote:
The BSOD has never recurred when I reboot in safe mode with networking


This means a faulty/outdated driver is causing it





Quote:
is all grainy and scratchy and impossible to read


Usually caused by overheating or a bad GPU

Read other 6 answers
RELEVANCY SCORE 70

Hey Guys,
I'm fresh out of ideas with a system I am charged to maintain at work. It continually crashes without any form error message (as per the topic title). Are there any ways of identifying what is causing the crashes that I am unaware of?
I am currently doing some isolation tests because this leads me to believe it is a hardware issue, but would be grateful of any input.
Thanks
a3

A:Crash w/o BSOD or Error in Event Log?

Hello,

Such problems are usually caused by hardware. In particular, I'd investigate the PSU as a probable cause. Could we get some specs on that, such as the age and model?

Run Prime95 as well; specifically run the Large FFTs test, but the others would also be good when you have the time.

CPU - Stress Test with Prime95 - Windows 7 Forums

Read other 10 answers
RELEVANCY SCORE 70

I know that this issue has been addressed many times on this site, but after some effort I haven't been able to find a fix that applies to my problem.

Symptoms:

- while shutting down manually (click 'shut down') system briefly says that it is "waiting for background programs to close" before shutting down (2-5 seconds). Even though there are no programs running.
- Then that message disappears, then appears and disappears again.
- All this without any user interaction
- On startup, all is well

BUT
- if left unattended, the system will put itself to sleep (despite the power settings) after a short time
-- or something resembling sleep; the power light remains on, but the system will not respond to input from the keyboard or mouse;
- after a hard shutdown and wakeup (hold power key for 5+ seconds) the BSOD appears

Message:
DRIVER_POWER_STATE_FAILURE
STOP: 0x9f
FIRST PARAMETER: 0x03

Your help would be greatly appreciated. I have attached the files generated by the debugger.

Read other answers
RELEVANCY SCORE 70

Hiya,

I'm having problems with my computer. Inexplicably, my dad tried to log on earlier and upon logon he got BSOD, with the error being cited as IRQL_NOT_LESS_OR_EQUAL. I'm no expert, so I tried to do a system restore, which didn't help at all. Initially, I couldn't even load it up in safe mode without getting BSOD'd, but now it has for some reason begun to work in safe mode. I've been reading around this error on my laptop and it seems to happen when there's a driver inconsistency or you've plugged something in - neither of these have happened.

One time, I got it to work for a short while, but my inet browsers weren't working, and after putting on music for 20 secs or so, I got another BSOD, this time reading SYSTEM_SERVICE_EXCEPTION.

I ran sfc /scannow as admin in cmd but it found no errors, apparently.

I've attached a file that the error report contained information. I don't know if anyone can use it to help me - if there's something else you need I'll try and get it.

Thanks very much in advance for any help - I'd really prefer not to have to reformat so much appreciated!

Alex

A:Double BSOD Crash Error

  
Quote: Originally Posted by alx91


Hiya,

I'm having problems with my computer. Inexplicably, my dad tried to log on earlier and upon logon he got BSOD, with the error being cited as IRQL_NOT_LESS_OR_EQUAL. I'm no expert, so I tried to do a system restore, which didn't help at all. Initially, I couldn't even load it up in safe mode without getting BSOD'd, but now it has for some reason begun to work in safe mode. I've been reading around this error on my laptop and it seems to happen when there's a driver inconsistency or you've plugged something in - neither of these have happened.

One time, I got it to work for a short while, but my inet browsers weren't working, and after putting on music for 20 secs or so, I got another BSOD, this time reading SYSTEM_SERVICE_EXCEPTION.

I ran sfc /scannow as admin in cmd but it found no errors, apparently.

I've attached a file that the error report contained information. I don't know if anyone can use it to help me - if there's something else you need I'll try and get it.

Thanks very much in advance for any help - I'd really prefer not to have to reformat so much appreciated!

Alex


If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to... Read more

Read other 1 answers
RELEVANCY SCORE 70

Windows 7 Home Premium 64 bit operating system
Windows 7 OEM
System is about 6 months old
i7 860 2.80ghz
8gb ddr3 ram
Ati Radeon 5770
1tb hard drive
Motherboard model OT568R, chipset intel DMI Hostbridge
Power Supply Thermaltake 850w


So this has just occurred to me while I am transferring files from my computer to an external toshiba 1tb hard drive, its happened 2 or 3 times during the transfer and after I boot back up the computer this message will come up

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF96000171A8B
BCP3: FFFFF8800A2DBDB0
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\111410-39031-01.dmp
C:\Users\RickQP\AppData\Local\Temp\WER-34117-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Thank you so much in advance for any help that you can give me with this issue.

A:BSOD system crash while transferring files to my external hard drive.

Hi -

The bugcheck on the lone dump -

0x3b (0xc0000005,,,) = system service threw an exception - 0xc0000005 = memory accesss violation

- Remove Daemon Tools/ Alcohol120

- Update these drivers -

Code:

LHidFilt.Sys Wed Apr 22 20:05:22 2009 (49EFB0C2)
LMouFilt.Sys Wed Apr 22 20:05:26 2009 (49EFB0C6)
atksgt.sys Sun May 17 09:36:34 2009 (4A1012E2)
lirsgt.sys Sun May 17 09:06:57 2009 (4A100BF1)

Driver Reference - http://www.carrona.org/dvrref.html#atksgt.sys


If BSODs persist, run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Nov 14 02:45:38.306 2010 (GMT-5)
System Uptime: 2 days 12:48:30.446
Probably caused by : win32k.sys ( win32k!xxxMNOpenHierarchy+17f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: dwm.exe
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff960`00171a8b fffff880`0a2dbdb0 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 69.6

Hi,

I've been having Kernal data inpage error which I assume is from a faulty harddrive (or maybe the RAM?!). I occasionally get a disk check during bootup, which didn't seem to help. I was saving up to buy a hybrid SSD/HDD drive before replacing it, but now it seems a bit too late.

Yesterday after a windows update, I rebooted my computer and the desktop was running very slow, nothing would open, explorer.exe would crash, I would be stuck in desktop until I force shutdown by holding the power switch (Shutdown didnt work), after doing this once or twice, I now get a BSOD again with a registry error right after the desktop loads for 1-2 seconds. X051 error code I think.

What step should I take now to diagnose the problem?
Thanks!
 

Read other answers
RELEVANCY SCORE 69.6

Hey Everyone,

I've been battling a BSOD 0x000000F4 for a while now and can't seem to figure it out.

Machine:
Intel Core i5 [email protected] 2.80ghz
8 GB RAM
Windows 7 Ultimate 64 Bit (Service Pack 1)

Here's the skinny on what I've done so far:The BSOD always happens regardless of what I'm doing; even if machine is idle
The system is NOT creating dmp files for me to view using BlueScreenViewer
Firmware for SSD which is running OS has latest update

I've have also read the BSOD Posting Instructions thread and have posted the zip file created by the SF Diagnostic Tool.

If I need to post anything else, let me now.

Anyone who can help, much obliged!!

A:BSOD (0x000000F4) and dump files not generating. Windows 7 Ultimate 64

Hello xtianduarte.

Scan the system for possible virus infection.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Uninstall Microsoft Security essentials, and install a fresh downloaded copy.

Follow the tutorial: Windows Update - Reset

Update the following drivers:
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC: Realtek
Cisco Systems VPN Client: Cisco Systems, Inc
D-Link DWA-556 Xtreme N PCIe Desktop Adapter: From the manufacturer's website.
Then follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. Post it upon the next system crash, following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 2 answers
RELEVANCY SCORE 69.2

My computer often crashed in BSOD during this two months,which even happen after i reinstalled the win7.Here is the bugcheck: 0x0000000a (0x000000000100002c, 0x0000000000000002, 0x0000000000000000, 0xfffff800050045d0)
Windows 7 x64 OEM version,re-installed but the BSOD still happen
Can anyone help me?

A:frequent BSOD crash,error 0x0000000a

Hi

Have a read of this thread and follow the instructions to upload dump files
http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 69.2

*** WARNING... LONG STORY! ***

I've been getting the BSOD error 0x0000001A after i recently reinstalled windows and installing a new graphics card. Originally I was having an issue with my computer when I was only playing the beta of Starcraft 2 where my computer would go into power save mode. I contacted Dell about 2 months ago and they instructed me that my graphics card was starting to die. I continued using it until about a week ago when on a scorching day my computer wouldn't get past the windows logo screen (my fault for trying to run my computer in my room with the room temp being over 100). I noticed my graphics card would get scorching hot within 5 mins of use. My computer would only start in safe mode. Retardedly, I thought that by downgrading my windows version from 64bit to 32bit I would be able to access my desktop in normal mode but I initiated the install through safe mode. I was unable to complete the re-install however because it was originally started in safe mode. I ended up getting a new graphic card but after instaling it and trying to start windows i was getting stuck in an install error loop. I was finally able to reinstall windows this past Friday but since then I have been getting the BSOD. I have spoken with window's tech numerous times and have reinstalled windows 2 additional times and the drivers for my new graphics card but still get the errors.
I have been looking through the forums and ran my own "perfmon /reports" and have attatche... Read more

A:Getting BSOD error after graphic card crash

  
Quote: Originally Posted by Isralios


*** WARNING... LONG STORY! ***

I've been getting the BSOD error 0x0000001A after i recently reinstalled windows and installing a new graphics card. Originally I was having an issue with my computer when I was only playing the beta of Starcraft 2 where my computer would go into power save mode. I contacted Dell about 2 months ago and they instructed me that my graphics card was starting to die. I continued using it until about a week ago when on a scorching day my computer wouldn't get past the windows logo screen (my fault for trying to run my computer in my room with the room temp being over 100). I noticed my graphics card would get scorching hot within 5 mins of use. My computer would only start in safe mode. Retardedly, I thought that by downgrading my windows version from 64bit to 32bit I would be able to access my desktop in normal mode but I initiated the install through safe mode. I was unable to complete the re-install however because it was originally started in safe mode. I ended up getting a new graphic card but after instaling it and trying to start windows i was getting stuck in an install error loop. I was finally able to reinstall windows this past Friday but since then I have been getting the BSOD. I have spoken with window's tech numerous times and have reinstalled windows 2 additional times and the drivers for my new graphics card but still get the errors.
I have been looking throug... Read more

Read other 7 answers
RELEVANCY SCORE 69.2

I completed a fresh full install of Windows 7, updated all drivers and even flashed my bios to the latest release. Here are my system specs:

OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SUAREZ-PC
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type x64-based PC
Processor AMD Phenom(tm) 9500 Quad-Core Processor, 2526 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 080015, 5/30/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name Suarez-PC\Ken
Time Zone Central Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 4.00 GB
Available Physical Memory 2.65 GB
Total Virtual Memory 8.00 GB
Available Virtual Memory 6.49 GB
Page File Space 4.00 GB
Page File C:\pagefile.sys

I keep getting random bsod error stop 0x00000101 and cant figure out why. Sometimes it runs well for the day and some times it crashes 4 times in less thatn 2 hours. I have attached the latest dump file, hope someone here can help, pulling my hair out on this.
thanks

A:BSOD crash error STOP 0x00000101

Everything I could find on your stop error points to a heating issue, specifically an overheating CPU... Is this a custom built rig?? I would carefully clean/reapply some Arctic Silver heatsink paste and see if this helps...

Read other 9 answers
RELEVANCY SCORE 69.2

hello all. i just recently completed the build on a customer build. at random times i will get a bsod crash and restart. the error says system exception error at the top of the BSOD and computer goes memory dump and system restart. it is an intermittment issue and definitely a little computer savvy.

System specs

AMD Athlon II X4 635 Propus 2.9GHz Socket AM3 95W Quad-Core ASUS M4A79XTD EVO AM3 AMD 790X ATX Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM SATA 3.0Gb/s 3.5 G.SKIL 1 GB 240-Pin DDR3 SDRAM DDR3 1333 x 4 Rosewill BRONZE series RBR1000-M 1000W EVGA 01G-P3-1158-TR GeForce GTS 250 1GB 256-bit DDR3 PCI

Exp Much help appreciated
matt

A:BSOD crash System exception error

Hi,
Your dump have error code :
0x3b = indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
0x7E = usually cause by drivers.

Start with removing avast and replace it with MSE , because I see avast driver involved in the crash.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff88002abf2a3, fffff88006772a98, fffff88006772300}
Probably caused by : aswMonFlt.sys ( aswMonFlt+52a3 )
Perform system file checker because your windows services crashed or stopped in an unsupported way.
--> command prompt(as admin) -> sfc /scannow

Update these drivers :

Code:
AsIO.sys Mon Dec 17 01:11:49 2007 --> Asus PCProbe Utility
Rt64win7.sys Fri May 22 07:52:30 2009 --> realtek NIC
Log

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002ac56e0, fffff8800a3ecec0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )

Followup: MachineOwner
---------

1: kd> !analyze -v
***************... Read more

Read other 4 answers
RELEVANCY SCORE 69.2

I came back to my computer this morning and saw that it had crashed with a BSOD sometime early this morning. This happened the other day, too. The computer is just idling and running a Minecraft server.

A:Random BSOD crash unknown error

Code:
127.0.0.1 activate.adobe.com
Have you purchased a license for all your Adobe products? 127.0.0.1 is used primarily to block activation for the Adobe products.

Read other 3 answers
RELEVANCY SCORE 69.2

I haven't been able to catch the exact errors when it has happened but it has only started since I installed Windows 8. I assume it's some sort of driver issue but any help would be great.

Thanks in advance,

Brent

A:BSOD - memory dump error/crash

Bump

Read other 2 answers