Over 1 million tech questions and answers.

Zbook - Cannot install Disk Security - Error 1001.

Q: Zbook - Cannot install Disk Security - Error 1001.

Not having much faith in finding the answer to this, since quite a few people have reported this. I've seen about a dozen threads, some having no suggestions, others have suggestions, but none of them have worked for us. We have a few Zbooks, Windows 7 Profesional, and we cannot get Disk Security to install. Gives error 1001. Disabled AntiVirus. Booted into safe mode. Uninstalled any conflicting HP software, still no go. Spent two hours on chat with HP yesterday, tech unisntalled, reinstalled, uninstalled, reinstalled, uninstalled, reinstalled, etc over and over. I finally gave up as I was sick of having to keep logging back in after each reboot. Does anyone have any suggestions?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Zbook - Cannot install Disk Security - Error 1001.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 68.4

So my fortnite freezes and crashes without a error code from UE4 when i go into the windows logs i get this message:

Fel-bucket , typ 0
Händelsenamn: LiveKernelEvent
Svar: Inte tillgänglig
Kabinett-ID: 0

Problemsignatur:
P1: 141
P2: ffffae8746c864a0
P3: fffff80236c3fea8
P4: 0
P5: 3344
P6: 10_0_17134
P7: 0_0
P8: 768_1
P9: 
P10: 

Bifogade filer:
\\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20180722-1007.dmp
\\?\C:\WINDOWS\TEMP\WER-2563031-0.sysdata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5DD1.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E11.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E2F.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E6F.tmp.txt

Filerna kan vara tillgängliga här:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_141_93315b5537862960f7b2a2928cccd69d046a9_00000000_cab_27975e6e

Analyssymbol: 
Kontrollerar lösning igen: 0
Rapport-ID: 34543b4d-d9e8-47ff-a47c-f1e667549458
Rapportstatus: 4
Hash-bucket: 
Cab-GUID: 0

I saw on another post they told me to freshly reinstall my drivers i did that but still no luck.

Graphics card is: AMD Radeon RX460 2GB.

Read other answers
RELEVANCY SCORE 55.2

Hi, a little background: I updated to Malwarebytes 2.0 premium on Sunday and on its first scan it found pum.hijack.start menu for a user in s-1-5-21 . . .. -1001. I have never been redirected, and my computer is a few years old so I know that the slowness might just be the age and the kaspersky and malwarebytes pro running together, but I was worried so i had some people look at it. I go to school right now and can't afford to pay for a professional so the IT guys there did a few scans and ran a few programs to clean any infections(you'll see there are a few left on my computer, not sure if I should get rid of them or not). Told me that they think I am fine, but because they left the programs on there, and the fact I'm OCD (admitted fault), I decided to see if I can make the PC more secure.
 
 
Forward to today: I found the same user in permissions on a few folders as "unknown user" with the name s-1-5-21 . . . 1001. I have put a picture of what I am talking about as an attachment. Anyway here is my DDS logs, I am copying both the dds.txt and the attach.txt. If you need me to run any other please let me know. Thanks for any help you can give. This is my only PC and finals are coming in about 3 weeks so hope it is ok.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 11.0.9600.17041
Run by Owner at 21:12:56 on 2014-04-17
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.4095.2085 [GMT -5:00]
.
AV: Kaspersky Anti-Virus *Enabled/Update... Read more

A:Unknown User in security settings s-1-5-21 ... 1001 - Can someone please review?

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/531468 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 20 answers
RELEVANCY SCORE 52.8

Here is the error I am getting and it makes it so we have to reboot the PC when it happens? How can I fix this ?




1001


Windows Error Reporting


N/A


1/25/2017 2:36 PM


CPC-VNG








Message:


Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0

Problem signature:
P1: Spectrum.exe
P2: 9.0.0.0
P3: 56089bae
P4: be5b
P5: 0
P6:
P7:
P8:
P9:
P10:


Attached files:
C:\Users\CPC - VNG\AppData\Local\Temp\WERED0E.tmp.appcompat.txt
C:\Users\CPC - VNG\AppData\Local\Temp\WERED5D.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\CPC - VNG\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppHang_Spectrum.exe_50dc70ec2178cd4cd23a7c45d49df59424de3092_1d0bed7b

Analysis symbol:

Rechecking for solution: 0
Report Id: a9139c79-e34e-11e6-8c87-605718e18f97
Report Status: 1


Thank you for your time.

Read other answers
RELEVANCY SCORE 52.4

Everytime I try to install a software, I get this annoying popup, and all action is rolled back... Any idea how to fix it?? I don't use InstallShield by the way. So the hotfix available doesn't work... :(

A:[SOLVED] Error 1001.InstallUtilLib.dll: Unknown error

Hello; while there is an InstallUtilLib.dll and an InstallUtil.exe, there is not, that I can find, an InstallUtilLib.exe.

Read other 19 answers
RELEVANCY SCORE 52

Have a Zbook G3 17 which came with SATA,1TB HD only.  Installed a 1TB SSD M.2 2260 PCIe in the SSD connector on system board, updated BIOS to latest version and both drives are recognized and accessable in Win 7. My issue is, in the BIOS, I can not permanently change boot drive from HDD 0 to SSD. If I press "F9" key during booting up, I can select which drive to boot off of during that startup only. Next boot up computer reverts to HDD 0 for booting up.  I do not see anywhere in the BIOS where one can permanently select which drive to boot up on. I want to have the HDD as a data drive/backup and SSD as primary drive. Has anyone experienced this issue, if so how to corrected, or am I nuked? Fred

Read other answers
RELEVANCY SCORE 52

Hello everyone. I had just set my laptop to go to sleep (closed lid), and when I came back about 10 minutes later, it was turned off. When I turned it back on a BSOD error report had shown up.

I have attached the file that the BSOD guide said, but when entering "Perfmon / report", it said "The parameter is incorrect".

I have also uploaded a .txt file with the info that Event Viewer gave me.

Is Windows 7 . . .
- x64
- Original OS
- OEM
- OS is about two weeks old

A:BSOD Error 1001

Hello Niskala
& Welcome to SevenForums!

Let's get to it.

BSOD Summary

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Frederik\AppData\Local\Temp\Rar$DI00.164\080911-28033-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02c51000 PsLoadedModuleList = 0xfffff800`02e96650
Debug session time: Tue Aug 9 20:08:08.901 2011 (UTC + 2:00)
System Uptime: 1 days 15:58:38.478
Loading Kernel Symbols
...............................................................
................................................................
............................................
Loading User Symbols
Loading unloaded module list
...........................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
************************************************************... Read more

Read other 9 answers
RELEVANCY SCORE 52

I was trying to install Windows Office Enterprise 2007 when I got this error message and since then I've noticed it on most all attempts to install anything or, to my horror, attempts to uninstall programs. I try to uninstall something and it will get to a certain point and then roll back then give that error message.

How can I fix this???

xdarkmuzex

Read other answers
RELEVANCY SCORE 52

I am trying to download driver detective and when it is installing a little window pops up and says, Error 1001 InstalUtilLib.dll: unknown error.
this window pops up twice, the only option there is is to hit OK. you have to hit this screen twice. After those two pop op screens it pops up with another screen that says, Error:-1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for moreinformation.
i have a registered RegCure and ive ran that several times to try to fix this problem. ive scaned with macafee. i dont know what to do. can you help me?heeeeeeeelp!
 

Read other answers
RELEVANCY SCORE 52

Hello. I recently upgraded to Win7 and have been dogged by this crash. It will usually happen while playing games, but some games it doesn't happen at all. For instance, I just finished playing Metro 2033 with no problems what so ever, but when I started playing some old school Pirates, the system crashed after just a few minutes. Any thoughts on this?

A:Combination Error 1001 and 41

Can anyone help with this? I'm a stranger to dump files.

Read other 2 answers
RELEVANCY SCORE 52

Hi,

Today I have been getting BSODS on my Laptop in event viewer it shows Event ID 1001. I have attached a memory dump log please could someone look through this and let me know what could be causing this issue?

My laptop is > VPCEC1M1E/WI (VPCEC1M1E/WI) : Technical Specifications : VAIO and Computing : Sony


Many thanks in advance

A:Error ID 1001 BSOD

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION: Usual causes: System service, Device driver, graphics driver, memory


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Low\Temporary Internet Files\Content.IE5\VNFSFQ1J\081410-17752-01[1]\081410-17752-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`0300d000 PsLoadedModuleList = 0xfffff800`0324ae50
Debug session time: Sat Aug 14 09:55:19.697 2010 (GMT-4)
System Uptime: 0 days 0:03:53.289
Loading Kernel Symbols
...............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**********************************... Read more

Read other 5 answers
RELEVANCY SCORE 51.6

There seems to be major incomparabilities issue with the HP security client software and the zbook studio g3.  One example is that it causes crashes in archicad 19.  I have reproduced this problem with all the units we have which is about 12. Also some of the units were just crashing and shutingdown.  Other times they refuse to wake up properly from sleep or hybernation.  All these issues stoped as soon as I removed the hp security client.  Just wondering if the developers are aware of this and that its being worked on.  I feel that removing the client is just a work around and something that should not be necessary.  I like to have it work as intended so that we can utilize some of its features such as enkryption and finger print reader capabilities.

Read other answers
RELEVANCY SCORE 51.6

When I try installing any program I the get message at the end of the installation -Error 1001.InstallUtilLib.dll:Unknown.error. As an example, adobe reader, MS office. Any ideas?

A:Error 1001.InstallUtilLib.dll:Unknown.error

Download the Windows Installer Cleanup Utility and see if that helps

Read other 1 answers
RELEVANCY SCORE 51.2

Windows 7
-x64
Windows 7 Ultimate
Full Retail
System Hardware is all new
First Install of the OS

1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM
1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x OCZ Signature 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3SR1333LV4GK
1 x OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply
1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor BX80616I3540
1 x GIGABYTE GA-H55N-USB3 LGA 1156 Intel H55 HDMI USB 3.0 Mini ITX Intel Motherboard

Did a low-level format of the HDD before installing the O/S and drivers. Everything seemed fine till I turned it on this morning. I left the computer idle for a few minutes and came back to it recovering from a BSOD.

As for the report I am running MSE for virus protection. I am also managing Windows Update myself.

I've followed the instructions for BSOD's as per forum rules and have attached a copy of the report as a zip file.

A:BSOD - Error 1001 - Bug Check

  
Quote: Originally Posted by Mazdem


Windows 7
-x64
Windows 7 Ultimate
Full Retail
System Hardware is all new
First Install of the OS

1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM
1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x OCZ Signature 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3SR1333LV4GK
1 x OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply
1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor BX80616I3540
1 x GIGABYTE GA-H55N-USB3 LGA 1156 Intel H55 HDMI USB 3.0 Mini ITX Intel Motherboard

Did a low-level format of the HDD before installing the O/S and drivers. Everything seemed fine till I turned it on this morning. I left the computer idle for a few minutes and came back to it recovering from a BSOD.

As for the report I am running MSE for virus protection. I am also managing Windows Update myself.

I've followed the instructions for BSOD's as per forum rules and have attached a copy of the report as a zip file.


Memory exception caused by Team Viewer. Remove and re-install newest version (stay away from version 6 beta)
Ken J

Read other 1 answers
RELEVANCY SCORE 51.2

Unable to edit query SQL when there is a where clause but no group by without getting the -1001 error. 

Example:  This query is fine. 
SELECT DISTINCT BB1.StudentID, Table43.Booking_date, Table43.Session
FROM BB1 INNER JOIN Table43 ON BB1.StudentID = Table43.StudentID
WHERE (((Table43.Session)="230"));
But if I simply enter the SQL editor (and don't even make a change), I can not save it without the Reserved -1001 error popup even if it was already saved as is earlier.  Apparently it needs notation like
SELECT DISTINCT [BB1].[StudentID], [Table43].[Booking_date], [Table43].[Session]
FROM BB1 INNER JOIN Table43 ON [BB1].[StudentID] = [Table43].[StudentID]
WHERE ((([Table43].[Session])="230"));
in order to be accepted. In particular the [] around the field before the FROM
SELECT DISTINCT [BB1].[StudentID], [Table43].[Booking_date], [Table43].Session
FROM BB1 INNER JOIN [Table43] ON BB1.[StudentID] = Table43.[StudentID]
WHERE ((([Table43].[Session])="230"));
is no good, but
SELECT DISTINCT [BB1].[StudentID], [Table43].[Booking_date], [Table43].[Session]
FROM BB1 INNER JOIN [Table43] ON BB1.[StudentID] = Table43.[StudentID]
WHERE ((([Table43].[Session])="230"));
will work.

Read other answers
RELEVANCY SCORE 51.2

My computer crashed with blue screen in every few minutes. And everytime it boots up again it shows the 2 errors below in event viewer.

Regard
Siraj Mulla

A:Could anyone help about this error EventID 1001 - 1003

Test RAM

Read other 4 answers
RELEVANCY SCORE 51.2

Hello BleepingComputer, I am having a difficult time tracking down the cause of the failure of a program to re-install. the program is Wikitup dictionary. Previously, I have had problems with this program in the form of it not starting correctly; it uninstalls only with
difficulty. The problem now, however, is different. I am now receiving the following error message: Error 1001-On/AfterInstall event
handler of wikilon.installerHelper-value cannot be null> Parameter name: xml. I thought that the problem may be with Windows installer but I have been able to install other programs without any problems. The announcement of "value cannot be null" seems as though something
was changed somewhere; if it was, it was not by me as I would not know a line of computer code if it was in front of me. I've tried a restore point, tried retrieving the app from my back-up, tried downloading it from other (third-party) sites all to no avail. This program
works very well when it works and I consider it one of the best at what it does so giving up on it is not worth considering. I have had to
perform a complete system restore (wipe) of my computer in times past, and when I re-installed this app it always operates properly; it's
only when I have had to un-install and re-install it that this problem occurs. It's as though the program leaves some sort of marker on
my machine after an un-install that gets in the way of it's re-installation. Note-I have thought of ... Read more

A:Windows Installation Error # 1001

If your problem is with an uninstalled program leaving remnants behind, I suggest you use Revo Uninstaller to completely uninstall it. A lot of us use it. It's very useful. It does what Add/Remove Programs won't do.


http://www.revouninstaller.com/

Read other 1 answers
RELEVANCY SCORE 51.2

Hi, I cannot uninstall, repair, or install Virtual Router v0.9 Beta. Codeplex does not respond at all to the 1001 error, as I have seen from some posts over a year old. I would like to remove it, and I believe the error originated after a system restore.During Uninstall attemptError 1001. Exception occurred while initializing the installation:System.IO.FileNotFoundException:Could not load file or assembly 'file:///D:\Program Files (x86)\VirtualRouterService.exe' or one of its dependencies. The system cannot find the file specified.I hit ok, and then it says to close.During Repair attemptError 1001. The specified service already exists >>>> I then hit okay and this pops up:Error 1001. Could not find file 'D:\Program Files (x86)\Virtual Router\VirtualRouterClient.InstallState'. >>>I then hit close to exit.I imagine the solution to be to install it on another computer and copy the files onto my current via a flash drive, however I do not have the resources necessary to do this. I would like some help or alternative options please. Thank you for your time.

A:Virtual Router Error 1001

Hi ajax - -There seems to be a lot of people with Virtual Router problems -http://www.google.com.au/url?sa=t&source=web&cd=11&ved=0CB0QFjAAOAo&url=http%3A%2F%2Fvirtualrouter.codeplex.com%2Fdiscussions%3Fsize%3D2147483647&ei=H_OXTuW-KYmTiQei5M2rAg&usg=AFQjCNFUBgbjWuxuWmte6bP__4Oj7fL9qgThis link shows some solutions to try and many of the other problems people have. There may be one listed fix here that helps you -Regards -

Read other 4 answers
RELEVANCY SCORE 51.2

I bought an external SSD spec'ed at 450MB/s over USB 3. On my ZBook, I get 33MB/s. (My USB 2 thumb drives get over 25 MB/s on the same ports.) Shocked, I checked the internal HDD speed and found it to be only 60MB/s. The same external drive on two "equivalent" Dell laptops records 330-350 MB/s and their internal drives register higher than that.  Why is my ZBook so slow?

Read other answers
RELEVANCY SCORE 50.8

Hello Everyone...I need your assistance to fix my problem. My computer just crashed with a blue screen and sometimes it freeze. I've searched this error on google and I end up here.
https://onedrive.live.com/?id=56CE63709EDBEB64!108&cid=56CE63709EDBEB64&group=0
That's the link to my memory minidump file. Honestly I had 3 memorydump files, but I uploaded only one file to focus on it. Just let me know if you really need the other two dump files. THANK YOU!!! and GOD BLESS US ALL..

Read other answers
RELEVANCY SCORE 50.8

I have sbcglobal.net DSL, when I click on FINANCE, I get subject message. Help, please.
 

A:A my Yahoo! server error (code 1001)

what ur getting is an error telling you that the servers are super busy or there is a technical difficulty with the yahoo server. Try restarting your browser then logging back in and see if it works..if it doesnt then something is wrong with yahoo's servers
 

Read other 1 answers
RELEVANCY SCORE 50.8

I am getting this bugcheck error with a reboot. Any thoughts. Win 7 - Dell 9010 - 8 gigs ram - Very basic setup - typical office setup and anything specialized is done through the browser. 

error 1001 

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000119 (0x0000000000000001, 0x00000000000122b7, 0x00000000000122b8, 0x00000000000122b8). A dump was saved in:
C:\Windows\MEMORY.DMP. Report Id: 012516-12292-01. 


+ System 
- Provider 
[ Name] Microsoft-Windows-WER-SystemErrorReporting 
[ Guid] {ABCE23E7-DE45-4366-8631-84FA6C525952} 
[ EventSourceName] BugCheck 
- EventID 1001 
[ Qualifiers] 16384 
Version 0 
Level 2 
Task 0 
Opcode 0 
Keywords 0x80000000000000 
- TimeCreated 
[ SystemTime] 2016-01-25T15:47:32.000000000Z 
EventRecordID 85311 
Correlation 
- Execution 
[ ProcessID] 0 
[ ThreadID] 0 
Channel System 
Computer 810-124107.ad.cfcc.edu 
Security 
- EventData 


param1 0x00000119 (0x0000000000000001, 0x00000000000122b7, 0x00000000000122b8, 0x00000000000122b8) 


param2 C:\Windows\MEMORY.DMP 


param3 012516-12292-01 

rmletc

Read other answers
RELEVANCY SCORE 50.8

Windows Vista Business - Dell Desktop - IE9 Application Crash

A couple weeks ago I decided to download IE9 since I have been using Chrome mostly and every so often Firefox. Regardless, IE9 Crashes and loops with Windows error reporting prompts until close is clicked heavily or the application is force closed. I have included the event viewer information below. Im troubleshooting now but was also curious about some of the causes associated with this error.


INFORMATION entry via Event Viewer

Event 1001 Windows Error Reporting

Fault bucket 2511977869, type 1
Event Name: APPCRASH
Response: None
Cab Id: 0

Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16421
P3: 4d76255d
P4: igdumdx32.dll
P5: 8.15.10.2413
P6: 4de942fb
P7: c0000005
P8: 00009754
P9:
P10:

Attached files:
C:\Users\James\AppData\Local\temp\WER45AE.tmp.version.txt

These files may be available here:

ERROR via Event Viewer

Faulting application iexplore.exe, version 9.0.8112.16421, time stamp 0x4d76255d, faulting module igdumdx32.dll, version 8.15.10.2413, time stamp 0x4de942fb, exception code 0xc0000005, fault offset 0x00009754, process id 0x17f8, application start time 0x01cd0d684160eda5

A:Event 1001 Windows Error Reporting

Hi
One solution appears to be to turn off accellerated graphics in internet explorer 9: -

How to Disable Hardware Acceleration (GPU Rendering) in Microsoft Internet Explorer 9 (IE9) to Fix Font Problem? - Tweaking with Vishal

The other is to update the graphics drivers from Intel: -

Intel? Driver Update Utility

Read other 3 answers
RELEVANCY SCORE 50.8

So I have been trying to install windows seven into a hard drive for my friend.
I currently have windows install on my C:, have a separate HD for storage D:, and the third one that my friends wants windows installed into G;.
I am running windows 7 ultimate x64 and im trying to install essentially the same version into the G: drive.
Anyways first run through was going well, then it reset after reaching Completing installationg, but when it restarted it went to Roll back and undid the whole install.
From then on It wont let me install and on the Parition selection on the install screen it just says "Cannot install into this disk. The disk's controller is not enabled in your BIOS."
I have done some searches to try and find a solution to this issue, trying everything but no improvements.
Changed the format of the disk from MBR to GTP and back to MBR.
Looked for bad sectors.
Did start up repair.
Formated and reformated the disk.
Went into the BIOS and switched SATA from ACHI to IDE to Raid even. None of which seemed to make any difference.
Tried 2 different windows 7 x64 ,and one Windows 7 x32 installs all which give me the same error.
But the Disk itself seems to work, I can copy file to and from it, installed Autocad in it and ran it from there. I am no longer sure what to do about this.
Any help is welcome.

Read other answers
RELEVANCY SCORE 50.8

Dear all, I recently installed a 960 Pro 1 TB NVME drive in my Zbook 15 G3. I choose this drive because it is fast and it supports Class 0 / ATA Security and OPAL self ecnryption (SED). However, i cannot set a password on this drive in the EUFI/bios of the Zbook 15 G3, it is not listed. I have confirmed with Samsung that the 960 Pro supports Class 0 and they say that the bios/motherboard needs support for it. Does HP have any plans to release an updated firmware to support the 960 PRO bios password?Or do they have another solution for this? This is the fastest drive available on the market and probably a likely choice for owners of a workstation laptop.I really need hardware encryption, software encryption is not an option because of the performance penalty. As a possible last resort: can anyone confirm if bios password for the 950 Pro, SM951, SM961 or other NVME drives is supported by the Zbook 15 G3 bios? Or does anyone know encryption software that supports 960 Pro TCG/OPAL, i have confirmed that Windows 10 bitlocker does not support the 960 Pro with hardware encryption. This is the message i got from Samsung: "Dear Customer,  Thank you for contacting Samsung Support regarding your concerns and inquiries. We apologize for any inconvenience this may be causing you. The 960 series SSDs have support for both encryption levels, Class 0 and TCG OPAL 2.0. However, you must make sure your motherboard or software can... Read more

Read other answers
RELEVANCY SCORE 50.4

Hello, I could use some help with a blue screen issue, I've been having for a little while now, not sure how it happened or why but whenever I'm AFK from my computer for to long it gives me a blue screen crash with the error 0x0000001a (0x0000000000000031, 0xffffffa800aa60900,0xffffff8800d56700, 0xffffff8a0023351ac) page fault in non-paged area, I'm feeling that I should note also the the error number has changed recently but has been the same cause and result, if needed I'll post that to, also I'm rather techno illiterate so please keep it as simple as possible for me

Edit: sorry forget to upload this

A:DSOD while AFK, bug report error 0x0000001a event ID 1001

Welcome to the forum,

It looks like IObit is causing it, there's only one dump but it gets the flag,


Code:
BugCheck 50, {ffffffffffffffd0, 1, fffff800030ae75d, 0}

*** WARNING: Unable to verify timestamp for pffilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pffilter.sys
Loaded symbol image file: pffilter.sys
Image path: \??\C:\Program Files (x86)\IObit\Protected Folder\pffilter.sys
Image name: pffilter.sys
Timestamp: Sun Nov 18 18:07:22 2012 (50A9945A)
CheckSum: 0000F643
ImageSize: 00028000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
I would get rid of anything IObit and see if it helps.

Here's a tutorial for that,

IObit Products - Uninstall Completely

Read other 1 answers
RELEVANCY SCORE 50

Have new Zbook G3 and trying to install Widows 7 x64. Am using MDT and have everything set up in Deployment Workbench. Problem is that Zbook uses NVMe SSD and Win 7 has no native drivers. How can I perform install with USB stick when NVMe SSD Drive is not recognized? zLTI fails. Any thoughts?

A:Win7 install on Zbook G3

Hi: If your ZBook has the Skylake chipset and one of the 6th gen core processors, are you using this tool to install W7?  If not you need to.  There is a readme file on the link for how to use the tool. https://downloadcenter.intel.com/download/25476/Windows-7-USB-3-0-Creator-Utility      

Read other 1 answers
RELEVANCY SCORE 49.6

Hi all,
One of our PCs shutdown twice and one day I checked to see why it was shutting down and I got an error that was:




-


System













-


Provider









[
Name]


Microsoft-Windows-WER-SystemErrorReporting









[
Guid]


{ABCE23E7-DE45-4366-8631-84FA6C525952}









[
EventSourceName]


BugCheck

















-


EventID


1001









[
Qualifiers]


16384

















Version


0

















Level


2

















Task


0

















Opcode


0

















Keywords


0x80000000000000

















-


TimeCreated









[
SystemTime]


2015-08-04T20:33:25.000000000Z

















EventRecordID


4418

















Correlation

















-


Execution









[
ProcessID]


0









[
ThreadID]


0

















Channel


System

















Computer


XXXXXXXXXXX

















Security






 




-


EventData









param1


0x0000004a (0x0000000074a32e09, 0x0000000000000002, 0x0000000000000000, 0xfffff880081f6b60)









param2


C:\windows\MEMORY.... Read more

Read other answers
RELEVANCY SCORE 49.6

After the upgrade from Windows 7 to Windows 10 in my HP Zbook 15 I noticed the fan does not always start when using the system. It gets hot to a point you smell burning plastic. When I reboot the fan suddenly comes on at full power and the system cools down again. But only after rebooting. Somehow triggering a driver to start? The heatsink and fan blades are clean. It was totally in order when using Windows 7 on this system. I use the latest bios and drivers available from HP. In total the fan does not work 1 out of 3 times when using the system. after a new boot I monitored the onboard temp sensors with a tool called 'notebook fancontrol' I noticed the temperature was critical (80-90 Celsius) And even though the fan was in auto mode it dit not trigger a fan start. Thusfar I think there is a bug in Windows 10 but both HP and Microsoft should fix this issue. As I don't want my $2000 laptop broken I now have Notebook Fancontrol as an autostart app setting the fan to a fixed value of 20%, this helps but this is a workaround, it should be fixed! additional info: No excess cpu usage and no excess ram usage, it even runs hot in idle because simply the fan does not kick in..   

A:Zbook 15 overheating after windows 10 install

I got the same problem, not so worse that I smell burning pastic, but still, I could probably fry an egg on it.I updated all my drivers to the latest version last night using the Softpaq download manager. Including the Nvidea driver and the BIOS update. That solved the problem for me up until I shut down my computer. The computer started cooling down immediately and after about half an hour, it was cool again. However when I used my laptop today I got the same problem. Any update on this subject?

Read other 1 answers
RELEVANCY SCORE 49.2

Hi all,

I recieved my new notebook clevo170hm yesterday. The laptop was working fine for 2 days, but today it started behaving weirdly when I tried connecting it to the LAN internet and it said "no network access" and "unidentified network". I remembering installing a windows update and after a reboot this error came up, before the update things were good . Here's the event viewer error description:

Code:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0090F5C1E007. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Apart from that I tried connecting to my wifi network, still gave me the same error " unidentified network". Here is the cmd command result for "ipconfig/all"

Code:
C:\>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : #####-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : JMicron PCI Express Gigabit Ethernet Adapter
Physical Address. . . . . . . . . : 00-90-F5-C1-E0-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes... Read more

A:Network connection error 0x79, IP not assigned by DHCP. Event ID 1001

Forgot to mention, I do not have a router or modem. I am living in university accommodation hence all I got on the other end is a n ethernet socket.

Read other 1 answers
RELEVANCY SCORE 49.2

Hi all and thanks for your help in advance. This problem is driving me nuts. Did a fresh install of Windows 7 64 bit on a Packardbell Easynote TE69, all was running fine for a while but then on shutdown/restart I would get a hang that would last for 5 minutes or so. When the system was turned back on I would occasionally see a BSOD flash up, every time after the hang I would get the "Your system has recovered from an unexpected shutdown message" with error code 0x0000009f. Googling has turned up little. I have found the same error codes in event viewer in relation to Bugcheck under event ID 1001. Driver Power State Failure pops up loads when searching and so does updating my Wi-fi driver which I have done but no change. The only other symptom is that my usb mouse only works intermittently, I have tried several new ones, but the problem remains. I have attached my minidump file. Any help would be awesome. Thank you.

A:Unseen BSOD after shutdown hang, error 0x0000009f - bugcheck 1001 ID

Blue Screen of Death (BSOD) Posting Instructions

Read other 7 answers
RELEVANCY SCORE 49.2

Hi all this is my first post and upon googling these types of things you come up tops so i hope that someone can help me.
I am running XP pro sp3 with all updates and yesterday out of the blue i get this error.
Windows - No Disk.
Exception processing message c0000013 parameters 75b6bf7c 75b6bf7c 75b6bf7c

Cancel try again continue.

As you know it just keeps coming back.

I have downloaded hijackthis and here is a copy of the log. I have also attached a copy in txt format. Thanks peeps

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 18:02:41, on 02/12/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\CTsvcCDA.exe
C:\Program Files\LogMeIn\x86\RaMaint.exe
C:\Program Files\LogMeIn\x86\LogMeIn.exe
C:\Program Files\LogMeIn\x86\LMIGuardian.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\mdm.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\IoctlSvc.exe
C:\WINDOWS\system32\PnkBstrA.exe
C:\Program Files\Alcohol Soft\Alcohol 120\StarWind\StarWindServiceAE.exe
C:\Program Files\TVersity\Media Server\MediaServer.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\syst... Read more

A:Another Windows - No Disk error {needs Security Help}

^

I'm bumping this to the top for you. If you don't receive any help in 24 hours, PM me and I'll ask someone to look at it for you.
C:\WINDOWS\system32\svchosl.exe
O4 - HKLM\..\Run: [Windows Service Manager] svchosl.exe
O4 - HKCU\..\Run: [dcc] C:\WINDOWS\system32\dcc_.exe

O20 - AppInit_DLLs: dwgioc.dll
Just at a quick glance.
 

Read other 2 answers
RELEVANCY SCORE 49.2

I keep getting the error -Disk I/O error - when I try to install XP using the six floppies as I don't have a bootable CDROM.

I'm installing on KT7 motherboard, 13GHz AMD, 625M RAM. I've tried all combinations of boot sequence along with swopping Primary and Secondary between the Harddrive and the CDROM. Even changed the floppy in deperation

..any ideas very welocme
 

A:Disk I/O error on XP 6 disk install

the IDE cable that goes into the back of the floppy drive and only that end, needs put it in the other way round, see if that helps, also check all jumper setting are ok.
others will come.
 

Read other 2 answers
RELEVANCY SCORE 48.8

Hello, is it possible to install the  Samsung sm951 NVMe PCIe  on ZBook G3?And then install Widowsn 10 on SSD by mean of USB UEFI?Is there any issue with Bios/UEFI or sm951 Driver?  Are they in my workstation even if it is not native with SSD? Thanks for your help.Gianluca

A:How to install Samsung sm951 NVMe OEM on ZBook G3?

Samsung 950 and 951 are incompitable with HP Zbook G3 series. Those two hardwares may take long time to boot and much slower than normal boot time.




I am an HP employee.

Read other 3 answers
RELEVANCY SCORE 48.8

Dear all,I own a HP Zbook 17. This Laptop came with the Bios version L70 00.71.I've just seen there is a Bios update L70 01.10. This's link:http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5387519&sp... I downloaded it. I tried to update this Bios and my laptop reported successful update.But after watching the msinfo32 report, my laptop is still the old version bios L70 00.71 and i can't install windows 8.1.Is there any way I can update bios on HP zbook 17 and install windows 8.1?

A:Zbook 17 Can't update the BIOS and install windows 8.1

up.................................................

Read other 2 answers
RELEVANCY SCORE 48.4

Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots.

I've updated all my drivers. Tested my memory. Tested my RAM. Run a virus scan. Checked the heat on my Graphic card and CPU. and all seems to work just fine.
This is the errors i get:


Code:
Log Name: System
Source: EventLog
Date: 25-12-2013 19:10:41
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Snaski-PC
Description:
The previous system shutdown at 19:08:21 on ‎25/‎12/‎2013 was unexpected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-25T18:10:41.000000000Z" />
<EventRecordID>2045</EventRecordID>
<Channel>System</Channel>
<Computer>Snaski-PC</Computer>
<Security />
</System>
<EventData>
<Data>19:08:21</Data>
<Data>‎25/‎12/‎2013</Data>
<Data>
</Data&... Read more

A:Error 41, Error 1001 and error 6008.

Hi Snaski.

It is some display/graphics related issue.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark window, just before you close it.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* ... Read more

Read other 7 answers
RELEVANCY SCORE 48.4

Good afternoon. I post this only after exhausting all other options that I can find. Every laptop that I own, I build from scratch. Once it is built and updated and software installed, I snap an image of the device. This time, however, I can not get this system to install Windows 7 Pro x64. At first, I couldn't even get it to boot to a flash drive or external CD drive. An hour later, I updated the BIOS and reset everything back to factory defaults and boom, it finally loads up Windows. Now, I go through the setup process but every time I go to look at the drives [to format and what not], it tells me that I'm missing a required device driver. I select my language, and proceed, but get stuck at the same place. This is where I get super confused: This model laptop doesn't have a CD/DVD drive available, yet it's telling me that I'm missing 'a required CD/DVD drive device driver'. What?! Ok. I've downloaded all the drivers for the notebook, as well as used a 3rd party software to export all of them to another drive. It tells me to insert a CD/DVD [although there are none] or a flash drive to install the drivers. I've done this with both an external CD/DVD drive and with a 2nd flash drive, but still get the same message. My experience tells me to disable the USB 3.0 and force it down to 2.0, at least until I can get the OS installed, but I can't find any options for that in the BIOS. Does ANYONE have any other ideas to use?

... Read more

A:Unable to Clean Install Windows on ZBook Studio G3

Yes actually I was able to get it resolved... The CD that came with it was the key. I thought initially that's what I was using but apparently not. I work in an IT department so I have a thousand of those HP DVDs. Once I plugged in the DVD that came with the laptop it booted right up like there never was any issue at all. I did contact HP support about this and they were about as useful as Comcast Customer Support [for those of you that know what that's like]. I was supposed to get at least a phone call from someone but never did.  But there you go!

Read other 10 answers
RELEVANCY SCORE 48

We have an Ideapad Flex 4-1130 that has a hard disk security password question at boot .  We can't remember the password and would like to just be able to use it.  How can we format the disk or replace so we can use it again?

A:Hard disk security Flex 4-1130 error

Hi Agsriffith and welcome to the community,
 
You won't be able to, the password is kept on the hard drive and it follows the hard drive. You really need to remember the password or put the drive aside and get another one.
 
No matter in what machine you put it in or what you try to do, it will need that password.
 
Bypassing passwords  is not allowed to be discussed in the forum, so I am going to lock this thread.
 
Regards,
Dave

Read other 1 answers
RELEVANCY SCORE 47.6

Hi,

Every time I try to start up my computer, right when the Window's XP blue screen comes up, a window with the title "Windows - No Disk" comes up and it reads "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR3." with the options Cancel, Try Again and Continue. I click Continue 4 times, and the messages changes from "\Device\Harddisk1\DR3" to "\Device\Harddisk2\DR4", "\Device\Harddisk3\DR5", "\Device\Harddisk4\DR6" , then finally goes away.

Then, when I click on which name I want to log into, it begins to log in, and right as my desktop begins to appear, my computer restarts. I have been trying several times to get it to let me do anything on the desktop, and it wont.

I saw other posts about this same topic, but they were all able to start a program once their computer started. I'm not able to do anything.

Your help would be GREATLY appreciated. Thank you!!

-Melissa
 

A:Windows - No Disk error at Startup [Security Help Needed; moved from XP]

Read other 13 answers
RELEVANCY SCORE 47.6

so xp wouldn't install due to this no disk found error so i tried windows 98

ok i got windows 98 installed an working - but when i go to upgrade to XP (on boot) i still get the cannot find disk error!!!! However when installing while in 98 it loads the files-asks to restart- and then on restart i get a blue screen saying stop error or something and it wants me to do chkdsk /f and i did and that said to do a scandisk but i cant do a scan disk cause all my resourses are used or something! (and i cant get internet because my wireless card's cd only works with xp!!)
HELPPP

A:Xp On Install No Disk Error?

not enough info ... is xp on copied disc , is cd drive old and cannot read that type of disc , is cd drive laser
dirty , is cd dirty , did you format the hard drive first . calm down and tell us exactly what happened

Read other 7 answers
RELEVANCY SCORE 47.2

I have configured a server with Windows Small Business Server 2003. I have set it up to run using a workgroup and not domain. Now periodically the server shutsdown on its own listing the above mentioned Event ID which indicate that ;

"this computer must be configured as a domain controller"

Microsoft's description states that this is the cause of the servers operating system integrated setup was not complete. This is the only server on the network and otherwise the network itself has been running fine outside of the periodic shutdowns.

My question is how can this be done now after the fact and what dtepsd must be taken?

Thank you for any help you can provide.

ME
 

Read other answers
RELEVANCY SCORE 46.8

Hi folks,

History:
Yesterday I installed W7 and all working ok. For resons I wont go into I decided that a re-install (as so little info was in the o/s) was easier than trying to solve admin/user issues.

Setup before re-install:
My HDD has 3 partitions and some unallocated space
Partition 1 - System Reserved 300 Mb (NTFS, Primary, Active)
Partition 2 - Windows 7 400 Gb (NTFS, Primary)
Partition 3 - Vista Image from another HDD 150 Gb (NTFS, Primary)
Unallocated space - approx 400 Gb

Prior to beginning the renstall W7 was stable and happy. I could also dual boot happily into Vista on the other partition using the Win boot menu.

Re-Instal Process:
Went into Partition Wizard Boot CD and then wiped both the Sys Reserved partition and the Windows 7 partition (i wrote 0's to both)
I then formated both of these partitions using PWBD
Lastly I ensured that the Sys Res partition was Active (which it still was from last time)
I then re-booted using the W7 install DVD
It went through the instal process quite happily until the first re-boot is needed.

At this point during the previous and sucessful installation on Sat, upon booting up it said 'press any key to boot ffrom DVD drive' so i left it and it then booted from the HDD and carried on with the W7 install for 5 more mins and was done.

However this time, I got the same message about booting from the DVD and again I left it and nothing happened. After 5 mins I gave up and hit a key and it just said disk read error and hung on a... Read more

A:Disk error after 1st reboot in W7 re-install

Hello Matt.



Do the wipes again, it's always best to have the best possible space to install Windows 7 to.


If the Windows 7 install disk is one you burned yourself it may be a bad burn and needs to be done again, if so this would be the first thing to try.

Use the free ISO burner at the link below to burn another at a speed of now more than 4x and select to let the program to verify the disk before it finishes.

ImgBurn Free ISO Burner

Read other 9 answers
RELEVANCY SCORE 46.8

im trying to dual boot xp and vista. vista is already installed and because i am using sata drives i used nlite to create a xp install disk that has the drivers for the sata drives. the install goes perfectly fine until the install restarts it then gives me a disk read error and tells me to hit ctrl alt delete to restart. what could be causing this problem?
 

A:XP disk read error after install

I'm no dual bootist of vista, but usually you want to install XP first, then vista, from oldest system to newest. I hear vista uses a different boot methodology, and I'm sorry that I can't be of more assistance cause I'm not a fan of that operating system.
 

Read other 2 answers
RELEVANCY SCORE 46.8

After the first phase of my xp pro install the system asks to shut down and after boot it will continue installing but when the system comes back up i get a Disk read error. i tryed with another hard drive and it did the same thing only instead of disk read error it said error loading OS. What bios settings could cause this or is it a partition problem Seems like alot of ppl are having this kind of problem but i cant find a good answer

A:Disk Read Error XP install

Many experience XP loading problems due to RAM. If you have multiple sticks of RAM try with one and then the other. If only one stick try and borrow one from someone to test with. If that isn't possible try and lower the timings.

Once you get it loaded you will probably be able to go back to your original RAM setup.

Charlie

Read other 1 answers
RELEVANCY SCORE 46.4

Several days ago my Win7 Home Premium x64 install started having an issue where the update for Security Essentials wouldn't install. This started carrying over for every other windows update, so I ended up following the posts here about repairing your installation. I've been able to get everything else working, but I still cannot reinstall security essentials.

I'm now getting error 0x80070656 when I attempt a reinstall.

Need some help, please....

A:Cannot install Security Essentials - error 656

Hi,

Please refer to this link:

Installation Error 0x80070643 - Microsoft Answers

Regards,
Golden

Read other 5 answers
RELEVANCY SCORE 46.4

Hi, not sure if i am posting this in the right area, but i am trying to install a new security software (Norton) but each time i try to install, i get a pop up saying "error message 0xC200, this programme has been detected as malware, and the computer has blocked for your protection"
I have tried a few things, but to no avail..does anyone know what this means, and how to get rid of it?

thanks

A:Error Msg " 0xC200" when trying to install new security

Hi, not sure if i am posting this in the right area, but i am trying to install a new security software (Norton) but each time i try to install, i get a pop up saying "error message 0xC200, this programme has been detected as malware, and the computer has blocked for your protection"I have tried a few things, but to no avail..does anyone know what this means, and how to get rid of it?thanksHello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and... Read more

Read other 2 answers