Over 1 million tech questions and answers.

Driver power state failure after resuming from sleep mode

Q: Driver power state failure after resuming from sleep mode

I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't help. The problem only started occurring after one of the following:
- Updating Malwarebytes to latest last week
- Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were)
- Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com
Here is a log created by BluescreenView:
==================================================
Dump File : 060514-96281-01.dmp
Crash Time : 6/5/2014 7:23:39 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe001`218f88e0
Parameter 3 : ffffd000`bff2b930
Parameter 4 : ffffe001`2561d1c0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153fa0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+153fa0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\WINDOWS\Minidump\060514-96281-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9600
Dump File Size : 1,271,704
Dump File Time : 6/5/2014 7:26:13 PM
==================================================
The full minidump .dmp file is attached. In case attachments don't work here is the full minidump .dmp file uploaded: https://www.mediafire.com/?uv33hc3ffzdg8xb


Thanks for any help.

RELEVANCY SCORE 200
Preferred Solution: Driver power state failure after resuming from sleep mode

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver power state failure after resuming from sleep mode

Hi Lan1 and welcome to the forums ^_^,

I have analyzed your Dump file and below has been provided an analysis of your dump file for informative purposes :-

Code:
2: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00135b5c060, Physical Device Object of the stack
Arg3: ffffd000c3df9930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0013217d880, The blocked IRP
Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3
DRIVER_OBJECT: ffffe00135b70c30
IMAGE_NAME: usbccgp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52678625
MODULE_NAME: usbccgp
FAULTING_MODULE: fffff80157d82000 usbccgp
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`c3df98f8 fffff801`31803c1e : 00000000`0000009f 00000000`00000003 ffffe001`35b5c060 ffffd000`c3df9930 : nt!KeBugCheckEx
ffffd000`c3df9900 fffff801`31803b3e : ffffe001`32f70320 ffffe000`ffffffff 00000000`00000000 fffff801`31664240 : nt!PopIrpWatchdogBugcheck+0xde
ffffd000`c3df9960 fffff801`31660810 : 00000000`00000000 ffffd000`c3df9ab0 ffffe001`32f70358 fffff801`317e1e24 : nt!PopIrpWatchdog+0x32
ffffd000`c3df99b0 fffff801`3175eaea : ffffd000`c8800180 ffffd000`c8800180 ffffd000`c880c3c0 ffffe001`32b9c080 : nt!KiRetireDpcList+0x4f0
ffffd000`c3df9c60 00000000`00000000 : ffffd000`c3dfa000 ffffd000`c3df4000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
IMAGE_VERSION: 6.3.9600.16442
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x9f_3_power_down_image_usbccgp.sys
FAILURE_ID_HASH: {447d6c25-e30e-cab7-b8c4-6eeb621d3df1}
Followup: MachineOwner
---------


If we run an !irp on the 4th parameter, we get the usbccgp.sys and a reference to KSTHUNK which is the Kernel Streaming WOW64 Thunk Service of Windows

I remember this same kind of case. This KSTHUNK is associated with your Lenovo Easy Camera Software. So, please uninstall Lenovo Easy Camera and this should resolve your issue. (Fingers Crossed ^_^ )

In case the issue is solved, please mark this thread as solved ^_^

Read other 7 answers
RELEVANCY SCORE 124.4

I am experiencing an issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.

I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.

Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.

A:Driver Power State Failure in sleep mode

Hi M15 and welcome to the forums ^_^,

I am in the process of analyzing your dump files further. Below has been provided analysis of your dump files for Informative purposes.

Code:
**************************Fri Jun 6 04:50:12.040 2014 (UTC + 5:30)**************************Probably caused by : storport.sys ( storport!RaSendIrpSynchronous+70 )

BugCheck 9F, {4, 12c, ffffe0017919e880, ffffd00049969950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_storport!RaSendIrpSynchronous

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Version V2.20

BIOS Release Date 02/18/2013

Manufacturer Acer

Product Name Aspire M5-481PT

??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jun 6 01:42:48.219 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for iaStorA.sys

*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys

BugCheck 9F, {3, ffffe000d7f8e060, ffffd000ca5e9930, ffffe000da3955c0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_disk_IMAGE_iaStorA.sys

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Ver... Read more

Read other 12 answers
RELEVANCY SCORE 122.8

I am using lenovo G580-20150.
I know this problem have been opened a tread but the problem i dont' think it's same so i woud like to ask for some solution after listening to my problem.
I have been user of windows 8 and 8.1 for quite some time.
everything works fine for me for the windows that i currently using , windows 8.1.
including i can put in sleep and wake it as usual.
but ! since past few days i notice that my computer getting weird when i enter sleep mode (for example closing the lid)
it crash... it bsod.

And it occur since the day after i installed somekind of VPN software and wiFI sharing that my friend gave me.
After that day, i can't put my computer into sleep. whenever i do that it keep crash.

at first , i thought lenovo energy management that cause the prob
so i uninstalled... it still makes no different , still i can't put my computer to sleep.
after that i uninstalled the vpn and wifi sharing software, it still makes no different.
But i am very sure that the vpn and wifi sharing software cause the problem.

Because before this everything works fine until that two software comes to my computer. I really need someone that able to analysis the dmp file. TQ

I willing to learn and contribute if i were given the opportunity . tq

A:Driver Power State Failure after enter sleep mode

Hi Eric & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe00175b29e10
Irp is active with 3 stacks 2 is current (= 0xffffe00175b29f28)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe00177cc0050 00000000 fffff8025f7952d8-ffffe00173c59d60 Success Error Cancel pending
\Driver\tunnel nt!PopRequestCompletion
Args: 00015600 00000001 00000004 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00173c59d60
Args: 00000000 00000000 00000000 00000000


Now, as we can see from the Dump file analysis, "tunnel.sys" has been blamed which is the Microsoft's Tunneling Driver but since it is a component of Windows, chance of it being the culprit is extremely low. This means your guess that the BSOD are caused by the VPN Software.

On checking the Drivers, I found the SoftEther VPN installed on your system. Please uninstall it from the system and see if the system still BSOD's or not.

Let me know how it goes ^_^.

Read other 3 answers
RELEVANCY SCORE 122.8

Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is greatly appreciated.

A:BSOD During Sleep Mode - Driver State Power Failure

Hello fran.

It appears that Avast is causing the BSODs there.

avast! Self Protection Driver

Code:
fffff880`02677de8 fffff880`068e2940Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2f940
Description here: Driver Reference Table - aswSP.SYS

avast! Virtualization Driver

Code:
fffff880`02677d68 fffff880`066d32ccUnable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x4e2cc
Description here: Driver Reference Table - aswSnx.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Using more than one antivirus program is not a good practice. It will make your system unstable in turn. Uninstall McAfee Using McAfee Removal Tool.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it... Read more

Read other 1 answers
RELEVANCY SCORE 122.8

Hey!

I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD..


However the system managed to dump two files for me on BSOD.

Take a look and thanks for the help you give me :)

A:DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hello,

Please take a look at the following thread and perform all of the requested steps.

Once you have all the requested reports please attach back here.

http://www.techsupportforum.com/foru...ta-452654.html

One dump is really not sufficient to determine the cause. The reports will also provide other info to help diagnose the issue.

The dump provided indicates a problem with the Realtek Network driver please try updating or re-installing this driver.

Realtek

I would also suggest that you fully update Windows including the Windows 7 Service Pack.


Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03268000 PsLoadedModuleList = 0xfffff800`034a5e50
Debug session time: Fri May 10 12:00:54.715 2013 (UTC - 4:00)
System Uptime: 0 days 8:41:33.010
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *... Read more

Read other 2 answers
RELEVANCY SCORE 122.8

I have tried to test this issue my self by trying to read trough the DMP file and Event Viewer. (haven't done this before, so i think i have possibly overlooked something)
The computer model is: HP ProBook 430 G2
The things i have tried is uninstalling and updating the drivers.
Using another OS Disk (It worked fine when doing this)
Starting in safe mode (This also worked fine)
Checked advanced power settings (Was nothing wrong there from what i could see)

Read other answers
RELEVANCY SCORE 121.6

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 121.6

Hello

I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook.
It always come up after I put the computer in sleep mode.

After dozen of search and websites, I found this forum.

I hope you will be able to help me.

Please find below the informations about my OS
- Windows 7 Home Premium Edition
- x64
- OEM
- age of the system : 3 years old. The hard drive has been replaced 1 year ago.
- age of OS installation : 2 days old (reinstalled from the recovery disk)

I have also attached the System Health Report AND the BSOD Dump & System File Collection report.

Let me know if you need something else... and Thank already !

A:BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)

Please install any Windows Updates you have not yet installed. I notice you do not have Service Pack 1 installed yet.Update to Service Pack 1 (SP1)Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site




Crashes indicate USB device issues.Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained t... Read more

Read other 1 answers
RELEVANCY SCORE 120.4

Hello all

This is my first post in here. Please bear over with my English – it is not my native language.

My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
SILVERSTONE Grandia 04
DeZen PSU 500 Watt, TitanPower, 17-19 db
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x4 GB Corsair Vengeance ram (just bought new ones to see if it would help)
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB

My previous setup was with a AMD 240e but I have made a clean install.

I use Microsoft Security Essentials for antivirus and have firewall turned on.

The Media Centre machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings.
Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wakeup is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity.

I have made several new install and tried to exclude the SSD and install a 32 bit Win7 – but the BSOD still occurs 4-5 min after awake.

I have updated all drivers and tried to run Verifier with no luck.

Hopefully someone can help

A:BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I have updated the Perfmon details - I had forgot to run the Windows Experience Index

Read other 9 answers
RELEVANCY SCORE 119.2

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 119.2

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 116.4

I've been getting a BSOD about 5 - 10mins after resuming from Hibernation. I used bluescreenview to look at the dump file since I can't seem to install Debugging tools for windows, and found that ntsokrnl.exe was apparently causing it. I've tried using startup recovery to repair the boot.ini, it didn't find any problems and I used the driver verifier but, that doesn't seem to be turning up any results. I don't know what else I should try, so here I am. Any help would be great.

A:BSOD Driver Power State Failure after resuming from Hibernation

DAEMON Tools is known to crash window. Uninstall and test, report back.

Read other 3 answers
RELEVANCY SCORE 116.4

Stared getting this again. Seemed like it was fixed after removing DeamonTools but apparently not. Here's the latest dump files and info.

A:BSOD Driver Power State Failure after resuming from Hibernation

Uninstall ASUS Charger Driver (aicharger).

Read other 1 answers
RELEVANCY SCORE 112

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 105.2

Hi,
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.

My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.

Help!

A:Driver Power State Failure on wake from sleep

Which hardware diagnostics have you done?

Please run Driver Verifier according to these instructions: Driver Verifier Settings

Just a guess at this point, but try removing Diskeeper to see if that helps.
If not that, then try removing the Citrix software to see if it helps.

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Oct 11 09:56:37.534 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101113-15578-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 20:21:57.335
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 9F, {3, fffffa80036b7890, fffff800c68d07f0, fffffa800de92610}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80036b7890, Physical Device Object of the stack
Arg3: fffff800c68d07f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800de92610, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_ACPI_ANALYSIS_INCONCLUSIVE
CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"
MaxSpeed: 1700
CurrentSpeed: 1696
BIOS Version GDETA1WW (1.61 )
BIOS Release Date 09/14/2013
Manufacturer LENOVO... Read more

Read other 1 answers
RELEVANCY SCORE 105.2

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

A:BSOD after going to sleep, driver power state failure

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

Code:
>[ 16, 2] 0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007049c50

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`06d15000 fffff880`06d7f000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:34:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ RAM - Test with Memtest86+
→ Guide to using Memtest86+ - Geeks to Go Forums

Read other 9 answers
RELEVANCY SCORE 105.2

My Toshiba laptop gives the above BSOD screen 9 out of 10 times when going to sleep. I have installed the latest Win 8 video drivers but that was no help.

I have attached a couple of the minidump files.

A:Driver, power, state, failure when laptop goes to sleep.

Hi,

Bit of a messy machine there. First thing is first. Update or uninstall your sptd.sys. The installer/uninstaller does either:

DuplexSecure - Downloads

----------

Update Synaptics Touchpad driver:


Code:
SynTP SynTP.sys Mon Aug 17 14:35:16 2009


----------

Update J-Micron Storage driver:


Code:
jmcr jmcr.sys Mon Jul 20 07:39:02 2009


JMicron/Home

-----------

Update from the manufacturer:


Code:
tosrfec tosrfec.sys Mon Jun 01 02:58:53 2009
tosrfcom tosrfcom.sys Tue Jul 28 06:18:20 2009
tosporte tosporte.sys Tue Jun 16 06:48:47 2009
Thpevm Thpevm.SYS Mon Jun 29 04:15:37 2009
thpdrv thpdrv.sys Sun Jun 28 22:02:56 2009


----------

Uninstall ESET. Windows 8 already has excellent a/v protection as a service.


Code:
epfw epfw.sys Tue Jun 28 03:30:10 2011
eamonm eamonm.sys Tue Aug 02 05:33:29 2011


----------

Uninstall ancient Acronis:


Code:
tifsfilt tifsfilt.sys Wed Aug 29 08:37:29 2007
timntr timntr.sys Wed Aug 29 08:38:23 2007


-----------

Update from manufacturer:


Code:
pgeffect pgeffect.sys Mon Jun 22 05:00:11 2009


---------

Visit Intel to let it scan to update storage drivers:


Code:
iaStor iaStor.sys Thu Jun 04 21:53:40 2009


---------

Update Realtek HD Audio:


Code:
RTKVHD64 RTKVHD64.sys Tue Jul 28 09:00:05 2009


Realtek

-------
Others needing update:


Code:
tdcmdpst tdcmdpst.sys Thu Jul 30 04:39:35 2009
TVALZ_O TVALZ_O.SYS Mon Jul ... Read more

Read other 3 answers
RELEVANCY SCORE 105.2

Been having issues with sleep mode with my build for months but in the past couple weeks it has gotten worse. When the computer goes into sleep, there's about a 50 percent chance it will wake up when I move the mouse. The other times I have to hard restart. In the past week it is now BSODing and giving me the attached dump reports. I'm pretty sure it's a driver issue but I can't narrow it down any more than that. Interested to hear what the experts think.

A:BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Hi slash196.

Update the driver to TP-LINK 150Mbps Wireless Lite N Adapter from Download - Welcome to TP-LINK, by matching with your device number.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, if possible, update the BIOS to Version 1501 from ASUSTeK Computer Inc. -Support- Drivers and Download M4A88TD-M/USB3

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a9e060, fffff80000b9c518, fffffa800a2fb920}

Probably caused by : ntkrnlmp

Followup: MachineOwner
------------------------------------------------------------------------------------------
Dispatch routines:
[00] IRP_MJ_CREATE fffff880016e7c30 ndis!ndisCreateIrpHandler
[01] IRP_MJ_CREATE_NAMED_PIPE fffff8800177e490 ndis!ndisDummyIrp... Read more

Read other 1 answers
RELEVANCY SCORE 104

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 104

Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software

Laptop starts up and can shuts down with out any problem.
If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.

All drivers have been update using driver dating utility by WinZip.

Dump files & system health check report is attached.

Will appreciate any help or suggestion in resolving this issue.

Thank you.

A:Power State Driver Failure on putting PC to Sleep or Hibernation

Two issues

1-Virtally all of these were sysRelated to NETwNv64.sys Wireless WiFi Link Driver from Intel Corporation causing pci.sys to crash. I would re-install with newest driver available.
2-Your Symantec. I would remove and replace with Microsoft Security Essentials.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 104

Dear Sir/Madam,

I've been having this issue since updating to Windows 8.1. I will wake my computer from it's sleep and a few minutes later I get the BSOD. In one notable event early on, I got two in a row after the computer restarted from the previous BSOD.

I fiddled with my power settings (I was trying to avoid my computer actually shutting down during sleep/hibernation) a few months ago and after that I didn't have any BSOD events that I recall until this past week. When they do happen, they tend to happen in rapid succession, as you can see from the dates on the collected data I've attached (I see there's a .txt file with all my computer's information for you reference) - I've had one every day for the past three days.

I've read through many of these threads and tried several of the solutions. I am running verifier.exe since the BSOD has started up again since from what I can understand from reading the .dmp file and this forum that the message I'm getting about ntoskrnl.exe is misleading (?).

Please take a look at the dumps and other information collected from the DM Log Collector Tool and let me know if you can help me solve this problem.

Thank You.

A:BSOD Waking from Sleep (power state driver failure)

Hi, pnutbudder,

I've been having a similar problem since a few weeks ago. I suspect this is due to a recent Windows or driver update, since both of us had the same problem at the same time. I'm going to take a look at your dump files in a few hours, but in the meantime, could you tell me

1. whether you have Evernote or any Blizzard games installed
2. whether you've installed any new programs recently,
3. what graphics drivers you have installed,
4 what music or audio programs you have installed (eg, music players, movie editors, music studios and recording programs, game streaming programs)?

EDIT: Okay, I took a look at your dump files, and they point to a bad interaction between the "usbccgp.sys" and the "ksthunk.sys" driver. These are the same drivers that are misbehaving on my system, too (Lenovo Y510P). As far as I can tell, the only device that uses ksthunk.sys is the Lenovo EasyCam. Try this fix:

1. Download the "Broadwell" version of the camera driver on this page: http://support.lenovo.com/us/en/prod...loads/DS101169 . We're going to replace your current camera driver with Lenovo's original camera driver.
2. Open "Device Manager" by right-clicking on the lower left corner of the screen.
3. Double-click "Imaging Devices" to open it.
4. Right-click "Lenovo EasyCamera" and click "Disable". You should see a small downward-pointing arrow appear next to the picture.
5. Right-click "Lenovo EasyCam... Read more

Read other 5 answers
RELEVANCY SCORE 104

New build i7 asrock motherboard W8 Pro. when waking from sleep everytime I get driver_power_state_failure BSOD.
Looking for some help on where to start. Updated the bios and everything else works great.

Thanks for any advice

Attachment 14584

A:BSOD Driver Power State Failure when waking from sleep

You have 3 hard drives - what is the make/model/wattage and age of your Power Supply?

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with you... Read more

Read other 5 answers
RELEVANCY SCORE 103.2

Hi,

Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.

Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.

This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.

Many thanks in advance,

Hob

A:Driver Power State Failure on Sleep, Hibernate, Restart or Shutdown

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.
ONLY install the drivers from your manufacturer!

Please remove your VPN software.

Code:
*** WARNING: Unable to verify timestamp for tap0901.sys
*** ERROR: Module load completed but symbols could not be loaded for tap0901.sys

Read other 0 answers
RELEVANCY SCORE 103.2

I am getting a BSOD mostly when I turn the computer on from sleep mode during sleep wifi will be on and most probably 1 of the browsers would have been working.

Reinstalled Windows 7 on Oct 8 and downloaded some drivers from the net.

I have uploaded the SF diagnostic zip file

Any help would be greatly appreciated

A:BSOD after turning computer on from sleep DRIVER POWER STATE FAILURE

Welcome aboard. Is there any reason that you haven't installed service pack 1?

Read other 9 answers
RELEVANCY SCORE 102

i guess i've been having this problem for about a month or so now and it's really becoming frustrating because everytime i have to leave my computer i have to shut it down if i don't want a BSOD..

i hope that someone can help me... every time i try to hibernate my laptop which is a HP DV4 Windows 7 Laptop i get a blue screen of death. it only started happening recently....maybe after i installed bit-defender..i'm not really sure..but it was doing fine before bit defender......

i used blue-screen view and with each time it registers a error it's with the driver for the NTOSKRNL.exe... i really hope that someone could help me because i just want my computer to go back to normal....and i wish that the problem has nothing to do with bit-defender......

tell me what you need and i'll try my best to get it to you so you can assist me with this problem cause i'm kinda new to the whole forum thing....

thanks..

A:[SOLVED] BSOD Driver Power State Failure When Hibernating/Sleep Windows 7 HP DV4

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html

Read other 17 answers
RELEVANCY SCORE 101.2

my laptop takes 20 to 30 minutes to shut down and comes up with driver power state failure message...i hope you can open the files i attached, was not sure on how to save those files...

A:driver power state failure - user-mode dump

Hi -

Your zip files contained a 2.3 MB user mode dump; not a post-mortem BSOD mini kernel dump.

However, I was able to obtain info that I believe points to your problem. It listed a 0xc0000005 exception = memory access violation.

Code:
Unable to load image C:\WINDOWS\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.6195_none_cbf5e994470a1a8f\mfc80u.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfc80u.dll
*** ERROR: Module load completed but symbols could not be loaded for mfc80u.dll
*** WARNING: Unable to verify timestamp for nspmain.exe
*** ERROR: Module load completed but symbols could not be loaded for nspmain.exe
*** ERROR: Symbol file could not be found. Defaulted to export symbols for msvcr80.dll -
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspavpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspavpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspavpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspfwpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspfwpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspfwpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspclpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspclpi.dll
*** ERROR: Module load completed but symbols could not be loa... Read more

Read other 5 answers
RELEVANCY SCORE 94.8

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

A:BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 94.8

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 88

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 88

Hey, I got some BSOD problems. Do you got time & experience to help me?

I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely.

My problems ATM!

- Driver Power State Failure
- Video TDR Failiure (nvlddmkm.sys)
- Screen freezes at start up or when I get to the desktop
- Have to Disable my NVIDIA GeForce GTX 675M to use the CPU (Windows has stopped this device because it has reported problems. (Code 43).

Got two other kinds of BSOD before I re-installed windows but don't remember what they said, I just felt like "Hey I need to re-install my OS anyways so w/e". But apparently that didn't solve the problems.

I also gained "NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped working While playing CS:GO" but that was before I re-installed windows. And now to use my CPU I need to go into Device Manager and shutdown my NVIDIA card to be able to use the CPU and use the Intel card instead. If I don't shut it down my CPU will freeze the screen for days, til I restart or I get a BSOD.

I will buy a can of air and open up my laptop and blow some dust away, perhaps that could help? Perhaps the NVIDIA card is burned/broken and I have to buy a new PC?

I've tried a few different driver for my NVIDIA card also, nothing works.

I'm no computer expert and thats why I'm here begging for help, so if someone could help me out here I would appreci... Read more

A:Driver Power State Failure,Video TDR Failure(nvlddmkm.sys)

Hi Markmsigt60 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Sep 26 06:15:51.972 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\092614-55906-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9200 MP (8 procs) Free x64

Built by: 9200.16912.amd64fre.win8_gdr.140502-1507

System Uptime: 0 days 0:07:07.738

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+5a540 )

BugCheck 9F, {3, fffffa800892b880, fffff8800326a7f0, fffffa80089c3e10}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800892b880, Physical Device Object of the stack
Arg3: fffff8800326a7f0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa80089c3e10, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz"

MaxSpeed: 2400

CurrentSpeed: 2395

BIOS Version E16F3IMS.50R

BI... Read more

Read other 3 answers
RELEVANCY SCORE 88

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 85.6

Hello,

I would appreciate any help with the following problem: the pc sometimes seemingly randomly shows BSOD with errors named in the title, I also attach corresponding screenshots. The problem wont happen if the PC power is supplied from the adapter AND there is some content running on the screen (video in VLC f.ex.). Other important symptoms are: Can not turn off the laptop. There will be endless blue screen saying shutting down,while PC already stopped working. I also can not get the PC to sleep. If i I go to sleep mode, display turns black, PC is still working on and on and I can not go back to desktop anymore.

Thank you very much for your help.

Ales

Read other answers
RELEVANCY SCORE 85.2

Hi all,

My windows media centre machine is causing me a few problems. I can send it to sleep but when it wakes the screen stays black and after a few minutes a get a BSOD with DRIVER_POWER_STATE_FAILURE as the error. I have tried unplugging all usb and external devices but the fault continues. I have also updated my bios to the latest version.

I am uploading my dump file now to onedrive

Machine is

ASrock 870 Extreme 3 R2
Amd x6 1090t
8GB 1600 Ram
3 Sata hard drives
1 SSD Ocz solid.

Any help will be greatly appreciated. Thanks

A:BSOD When resuming from s3 sleep state

http://1drv.ms/1fP7gJ9

Memory Dump

Read other 4 answers
RELEVANCY SCORE 85.2

Hello,

I just got a Driver Power State Failure Bsod. Please find attached the dump files. Any help would be greatly appreciated.

Edit: Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.

Checking Gigabyte for an update to the audio drivers.

Edit: No new driver on the Gigabyte site. Will reinstall.

A:Driver Power State Failure

Hi brouhahaha,

The Asmedia 106x SATA controller driver has caused the crash.
As a bluescreen crash happened only once, I wouldn't be worried too much about it.
Windows resolves bluescreens that only onces happened.

Code:
0: kd> !irp ffffe001eed11b40
Irp is active with 6 stacks 4 is current (= 0xffffe001eed11ce8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001ee8336e0 00000000 fffff8011a7d8bd0-00000000 Success Error Cancel pending
\Driver\pci storport!RaidAdapterPowerUpDeviceCompletion
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe001eeec7050 00000000 fffff8001b92ed78-ffffe001eed12c70 Success Error Cancel pending
Unable to load image asstahci64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asstahci64.sys
*** ERROR: Module load completed but symbols could not be loaded for asstahci64.sys
\Driver\asstahci64 nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe001eed12c70
Arg... Read more

Read other 0 answers
RELEVANCY SCORE 85.2

So I'm in the middle of playing Star Wars the Old Republic and BOOM. Everything goes down with a scream. What happened?  I only got the computer in late November. It's been working fine. I found this in the event log:Error    4/24/2016 7:44:40 PM    BugCheck    1001    NoneError    4/24/2016 7:44:33 PM    Eventlog    1101    Event processingCritical    4/24/2016 7:44:10 PM    Kernel-Power    41    (63)Error    4/24/2016 7:44:29 PM    EventLog    6008    None  I get the impression from googling its a bit peeved I won't let it update drivers but since I'm not letting it update anything but malware/virus definitions I don't see what would cause it.(I slammed the halt on all updates when the last intel graphics driver update proceeded to BREAK my game - repeatedly, after every auto update, thereby rendering the computer largely useless for my purposes. I'm still trying to figure out how to get anything but an intel graphics card since it is apparently more trouble than its worth.)Can anyone tell me for sure what would cause this and how can I prevent this?

Read other answers
RELEVANCY SCORE 85.2

I just got a BSoD with the error as DRIVER_POWER_STATE_FAILURE. I have attached the logs.

Also, I was googling for this and one site told to run sigverif.

The output for that is also attached. The second and third one are okay because I allowed them to install. They are a custom trackpad driver for Windows on Mac (Trackpad++ Project [Home Page]). However, the first one, I don't recognize. Is that the problem?

And I think the problem is with USB. I know you said last time it is Kaspersky but I have observed that whenever my USB ports act funny after waking up from sleep, the system won't go to sleep again. What I started doing was whenever I observe my USB port going bonkers, I restart the system. Today, I did the same thing and voila BSoD.

I would like to add one last thing. During our last conversation (if usasma is reading this), you mentioned 2 apple drivers which were older than the one in Bootcamp 5. Those are because Trackpad++ updates these drivers and replaces this. I don't think this is a problem as many of my friends are using it without issues. But, wdfcoinstaller01011.dll is what I am suspecting.

I also did Step 1 of the advanced troubleshooting here and am attaching that file (via SkyDrive as it is too big to attach here). http://sdrv.ms/17CINyA

A:Driver Power State Failure

The wdfcoinstaller is OK, here's a link to a description of it: Redistributable Framework Components (Windows Drivers)

The dump files blame 2 things - so let's start this out slowly.
First, uninstall Kaspersky and see if the system still BSOD's. Give it a day or two.
Then, if it does still BSOD, uninstall the VMWare program and see if it still BSOD's

Leave the system as it is, and upload the memory dumps.
We'll see what they blame and we'll move on from there.
IRFilter.sys Wed Jul 2 15:53:12 2008 (486BDCA8)
IR Receiver Driver from Apple Inc.
http://www.carrona.org/drivers/driver.php?id=IRFilter.sys

vmusb.sys Tue Sep 1 07:52:14 2009 (4A9D0AEE)
VMWare usb client driver
http://www.carrona.org/drivers/driver.php?id=vmusb.sys

applemtp.sys Tue Sep 22 18:18:06 2009 (4AB94D1E)

applemtp.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

CS420x64.sys Thu Nov 11 19:04:13 2010 (4CDC847D)

CS420x64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

applemtm.sys Wed Dec 22 22:01:31 2010 (4D12BB8B)

applemtm.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

Ext2Fsd.SYS Fri Jul 8 13:08:38 2011 (4E173996)
... Read more

Read other 1 answers
RELEVANCY SCORE 85.2

I periodically get a driver power state failure BSOD. It's happens about once a week or so.

Relevant files attached.

A:Driver Power State Failure

Check your post again, as there are no files attached.

Also, fill out your system specs. Click on the link in my signature to do it.

Read other 5 answers
RELEVANCY SCORE 85.2

So I have an Asus ROG laptop and I've recently started having some issues with it, one of them being this driver state power failure bsod. Its happened 3 times now in the past two weeks.

I haven't exactly nailed down what causes it, but I've done some research and most places suggest updating drivers and BIOS to fix it.

The first issue I'm having with this is that I'm unable to update my BIOS. I've got the file downloaded from the Asus website, I put it on a flash drive and tried to use the EZ Flash 3 utility to update the BIOS but it doesn't see the flash drive. In fact it doesn't see any drive at all except for one 256 MB partition on the main hard drive (laptop has an SSD and 2nd hard drive for storage). I've tried formatting the drive in FAT32 as old documentation suggested it might need that but still no luck. I've tried several flash drives and no luck. I read that USB 3.0 might be the problem, but the laptop only has 3.0 ports. So not sure what I can do about that if that is the actual problem.

Some other additional information, a few days ago I noticed my power brick for charging the laptop got extremely hot as it was under some blankets and such. How long that was going on I don't know. Could the charger be the problem? When it BSOD'd a couple hours ago it was shortly after I unplugged it (30 seconds-ish). But this did crash before I noticed the power brick issue so I don't know if its been a thing for that long or not.

Also I did update my video card... Read more

Read other answers
RELEVANCY SCORE 85.2

hey
Lately when ever i shutdowm my computer i eather get shutdowns taking as long as 30 mintues or a BSoD with a Driver power state Failure. Can anyone help? I have noticed that members here attached the Minidump as a .zip file, for you to figure out the problem , I dont know how to do that ..There are no other problems with system proformace. Also, when it restarts again it gives me messag that hardware ID missing, I dont know what does that mean.. shall I reformat the computer??

my PC information is
HP pavilion tx 2500
Windows Vista, SP1

looking forward to your reply and support..

A:Driver power state Failure

Please follow the directions here to upload the information that we need: http://www.techsupportforum.com/1871981-post2.html

Read other 3 answers
RELEVANCY SCORE 85.2

Hi! I am Monjur Alahi from bangladesh. I have a HP Pavilion Notebook, recently i sufferd a problem during start up . Its take too much time display a message which is " Driver Power State Failure". How can i fix the problem with my Notebook ? Help me Please

Read other answers
RELEVANCY SCORE 85.2

Sorry I have NO CLUE but I keep getting that DRIVER_POWER_STATE_FAILURE also. I have no idea what to do or how to do anything! Can someone email me on what I should do because I wont know how to get back here (sorry)
thank you
[email address removed]
 

A:Driver power state failure

Have you updated any drivers lately?
 

Read other 1 answers
RELEVANCY SCORE 85.2

my OS - XP pro SP2

Every time I try to shutdown my computer a blue screen appears:

Driver_Power_State_Failure
. . .
. . .
Stop (0x00000500 0x00000002 0x(changes every time) 0x81AF3E30).

Can someone Please advise ?

Read other answers
RELEVANCY SCORE 85.2

Hey all,

I just put Windows 8 Professional 32-Bit on my Gateway M100-E laptop. It seems to crash when it is restarted and it's power state has changed. As in from battery to power cord and vice-versa. The BSOD tells me the error is called a driver power state failure. This laptop is 100% stock with the latest Windows 8 updates. The antivirus I'm using is the included Windows Defender and Windows Firewall. Attached are my log files.

A:Driver Power State Failure

First of all

update this driver

Intel Raid StorPort Driver

Intel Download Center

Read other 4 answers
RELEVANCY SCORE 85.2

I've recently inherited a laptop from a friend of mine. I did a reformat/reinstall of Windows, and have been getting fairly a persisitent yet seemingly random BSOD. Always accompanied by the same message: driver power state failure. I am assuming that I have installed the wrong driver for one or more components, despite grabbing them all from the manufacturer's website. I am hoping you guys can help me narrow down which one.

My system:

Windows vista x64 SP2 Full retail (I think)
Original OS was the same, although likely OEM
Machine is 4 years old
Reinstalled Windows about 2 weeks ago

CPU: Intel Core 2 Duo T5750 2.0 Ghz
Video Card: ATI Mobility Radeon HD 2400 XT
MotherBoard: Acer Columbia, Chipset: PM965, Southbridge: 82801HBM (ICH8-ME)
Power Supply: ???

System Manufacturer: Acer
Exact model number: Extensa 5620 6396

Thanks for taking a look. I hope I gave you all the necessary info.

A:Driver Power State Failure

Crashes caused by 46088 15/03/2010 8:23:32 PM "C:\Program Files\M-Audio\Xponent\Streaming\MAudioXponent.sys"Contact M-Audio Support for help with the problem: M-AUDIO - Contact Tech Support


Analysis: The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:

Code:
**************************Fri Dec 14 08:07:19.500 2012 (UTC - 7:00)**************************
Loading Dump File [G:\BSODDmpFiles\Gnosys\Windows7_Vista_jcgriff2\Mini121412-01.dmp]
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Built by: 6002.18686.amd64fre.vistasp2_gdr.120824-0336
System Uptime:0 days 20:05:54.966
*** WARNING: Unable to verify timestamp for MAudioXponent.sys
*** ERROR: Module load completed but symbols could not be loaded for MAudioXponent.sys
Probably caused by :MAudioXponent.sys
BugCheck 9F, {3, fffffa8004ee9240, fffffa80043da320, fffffa8005072010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004ee9240, Physical Device Object of the stack
Arg3: fffffa80043da320, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8005072010, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_POWER_DOWN_IMAGE_MAudioXpone... Read more

Read other 1 answers
RELEVANCY SCORE 85.2

Computer was recently updated to Windows 8. When laptop lid is closed and opened, BSOD instead of sleep. I need to know which driver is causing it. "grab all" results attached. Thanks.

A:Driver power state failure

Welcome to Eight Forums,

Looks like a mixture of drivers from Acronis and Total Mounter seems to be the cause of the BSOD.
I would uninstall both these programs and their drivers and see if the sleep mode BSOD is eliminated.
Do you have a SSD and is the firmware for it up to date? Check for one, it may bring stability.

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8005c49050, fffff8033d53c7e0, fffffa8009021010}
*** WARNING: Unable to verify timestamp for KSPrt64.sys
*** ERROR: Module load completed but symbols could not be loaded for KSPrt64.sys
Probably caused by : KSPrt64.sys
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRI... Read more

Read other 3 answers
RELEVANCY SCORE 85.2

Hello, my BSOD only appears while gaming online. I don't really have any other information than the BSOD does state that it is a power state driver failure. Any help would be greatly appreciated.

Thanks

A:power state driver failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, ffffe00068187060, fffff802acaafce0, ffffe0006b0761e0}
Probably caused by : usbhub.sys
Followup: MachineOwner
---------
Args: 00000000 00000000 00000000 00000000
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe00068345030 00000000 fffff802aa99bdc8-ffffe00063cc82a0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[N/A(0), N/A(0)]

start end module name
fffff801`9c5c0000 fffff801`9c666000 btfilter T (no symbols)
Loaded symbol image file: btfilter.sys
Image path: \SystemRoot\system32\DRIVERS\btfilter.sys
Image name: btfilter.sys
Browse all global symbols functions data
Timestamp: Wed Sep 18 18:12:54 2013 (5239678E)
... Read more

Read other 0 answers