Over 1 million tech questions and answers.

Is my security camera/Iphone (while on wi-fi) being hijacked ?

Q: Is my security camera/Iphone (while on wi-fi) being hijacked ?

I've been having trouble with my ATT internet for a year or more. The internet download speed frequently drops to almost nothing (.53 or 1.23 Mbps) where it should be about 19-22 Mbps. They've been out here troubleshooting the line , changing
modems, and telling me whatever falls out of their mouth. So today I was looking in the ATT settings and system info. There I came across the event log which is difficult for me to decipher, but I do know what hijacked means. I'm most concerned with my security
camera (Stem-services) and my iphone being compromised. Here are some of the log entries. maybe someone can help me understand if something is going on. Thanks




INF
P0000-00-00T00:05:08
hurl
err=4 name=NO_DHCP_SERVICE clear


INF
P0000-00-00T00:05:06
hurl
err=4 name=NO_DHCP_SERVICE redirect


INF
P0000-00-00T00:05:06
hurl
err=4 name=NO_DHCP_SERVICE redirect


INF
P0000-00-00T00:05:06
hurl
host=aspen.turner.com uri=/api/postEvent/batch hijacked


INF
P0000-00-00T00:05:06
hurl
host=itv.stem-services.net uri=/ivi/cameraip hijacked


INF
P0000-00-00T00:05:06
hurl
host=phobos.apple.com uri=/bag.xml hijacked

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Is my security camera/Iphone (while on wi-fi) being hijacked ?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 82.8

I already have a home security camera system. What I'am looking for is software I can put on my desk top that will notify me on my iphone when motion detection is activated. As well as allow me
to monitor the cameras from my iphone.

Read other answers
RELEVANCY SCORE 49.2

I have some questions about smartphone security, specifically the difference between the Android & iPhone platforms. My motivation is curiosity. I am not using this information to decide which phone to purchase (I use a Tracphone).

Reading several articles on various web sites, I get the impression of the following:
(1) Android is less secure than iPhone
(2) There is no known malware for iPhone

Are these statements true? Is there any hard data that documents malware for the different platforms?

Anti-malware software: There appears to be several products for the Android, but I cannot find any product for the iPhone. Is this discrepancy due to Apple's superior security technology?

Comments?

A:Android vs iPhone security

Hello,

I am not a Apple expert (because I think it sucks) but there is no malware for Apple, so they have no anti-malware programs. The reason is that is open source and all members who use it can fix any problems.

Read other 6 answers
RELEVANCY SCORE 48.4

Apple to fix security hole in iPhone software.

Apple is planning to release a fix for a security hole in the software that runs on its iPhone, iPad and iPod Touch devices.

Related article: Theoretical attacks exploit iOS browser flaw.

The new browser security flaw in iPhones, iPods, and iPads could be more dangerous than initially suspected.

-- Tom
 

Read other answers
RELEVANCY SCORE 48.4

While Apple will most likely patch security issues that are discovered promptly, iPhone users should carefully monitor developments NY Times reports Serious iPhone security issuehttp://www.nytimes.com/2007/07/23/technology/23iphone.htmlA team of computer security consultants say they have found a flaw in Apple?s wildly popular iPhone that allows them to take control of the device. The researchers, working for Independent Security Evaluators, a company that tests its clients? computer security by hacking it, said that they could take control of iPhones through a WiFi connection or by tricking users into going to a Web site that contains malicious code. The hack, the first reported, allowed them to tap the wealth of personal information the phones contain. Although Apple built considerable security measures into its device, said Charles A. Miller, the principal security analyst for the firm, ?Once you did manage to find a hole, you were in complete control.? The firm, based in Baltimore, alerted Apple about the vulnerability this week and recommended a software patch that could solve the problem.

Read other answers
RELEVANCY SCORE 47.6

Im not sure what to do (see this pic)the window has been hijacked by this camera i put in, how do i put the right URL to get my website working again?

A:Camera hijacked my website? i think

I'm not quite sure what you mean, Ron. What do you mean by 'the window has been hijacked by this camera'?

I can get on RonUK.org easily enough, but the cameras all just show a black screen. The 'Device Status' shows gray for all cameras.

As background, are you still hosting the RonUK.org site on your local machine or have you moved it to an on-line host?

Read other 7 answers
RELEVANCY SCORE 47.2

Adobe?s announcements that a full version of Flash is coming to every smartphone not named Apple iPhone leave me conflicted. Full-blown Flash can be a boon to the mobile Web, but has the potential to become one huge security headache.



Adobe has the iPhone surrounded with Flash, but security headaches loom | Between the Lines | ZDNet.com

Read other answers
RELEVANCY SCORE 46.8

Websense Security Labs? ThreatSeeker Network has detected that Google searches on terms related to iPhone SMS information are returning results that lead to rogue Antivirus software.



Read more -
iPhone Blackhat SEO Poisoning Leads to Total Security Rogue Antivirus - Security Labs Blog

Read other answers
RELEVANCY SCORE 46.4

Security flaw puts iPhone users at risk of phishing attacks (Updated).

A flaw in Apple's implementation of SCEP makes it relatively trivial for a hacker to generate a malicious configuration profile that looks legitimate to users and funnels e-mail, Web, or VPN traffic to a malicious server.

-- Tom
 

Read other answers
RELEVANCY SCORE 46

I am running Win7/Pro x64. My System Spec is in my Profile.

I do not have iTunes installed on my desktop. I do have an iPhone 5, a hand-me-down from my son.

Yesterday the phone needed to be charged. I attached it to a USB port. I was asked by the phone if I trusted my desktop. I said yes. I was told that there were no new images on the phone to import, a fact I already knew. I've encountered this dialog before. It seems to be part of the procrustean Apple way of computing.

What troubles me is that a process started about the time I plugged in the phone. At a rate of 5-10 files/sec the 'modified' date was changed on over 3,500 jpg files on my data drive. I've not analyzed the order in which they were processed but suspect that it was A-Z on the file names and also on folder names.

Could this behavior result from iTunes running its 'sync' process? If so, is there anything I can do to prevent it from happening again?

If we have no Apple OS experts on this forum, does anyone know of an 'Apple forum' that is as respected as sevenforums is in the Windows world?

thanks

baumgrenze

Read other answers
RELEVANCY SCORE 45.6

I just got the new iPhone 4S and I have a 3GS as my old phone with no way to transfer my contacts. I was told I could save a backup of my 3GS to itunes, then load the backup onto my 4S.

Well my 3GS won't backup, it keeps saying "iTunes could not backup the iphone because an error occurred" without any error code. I've wiped my old backup, I've cleared sync history. I'm using a PC with itunes with the latest itunes version 10.5.

What can I do to get my contacts over to the new phone?
 

A:Error backing up iPhone - trying to transfer contacts to new iPhone 4S

You may have to load them one at a time.
 

Read other 1 answers
RELEVANCY SCORE 45.6

How to make your own iPhone Ringtone and transfer it to your iPhone directly?
 

A:How to make your own iPhone Ringtone and transfer it to your iPhone directly?

Here's a paid one....
http://www.iphone-ringtone-creator.info/
Seems to be a few listings.
Google search.
 

Read other 1 answers
RELEVANCY SCORE 44.4

Due to recent vandalism of my car, I'm thinking of buying a security camera to be kept pointed at my vehicle. The main parking lot is out of sight, but there is a small section of parking visible from my apartment. However, it is ~100 feet from my balcony, and since I have never had a security camera, I'm wondering if any of them are designed to zoom, so as to make a person's features more identifiable? For the camera to be useful, it would need to have night vision. How much would that interfere in identification?

I'm also wondering if any of these have the ability to sound an alarm when motion is detected?

A:Security Camera

There are many options available to you to achieve this, depending as always on the depth of your wallet.

You may wish to look at a wireless IP camera, these may be found with LED and IR night vision and can be set using software to activate and record on detection of motion and to alarm at the recording device, (your PC). if it is not possible or safe to mount the wireless camera then most will have basic zoom capabilities and some will have telephoto google "wireless IP cameras" for ideas.

Read other 2 answers
RELEVANCY SCORE 44.4

I am using native camera API in an android app development, the camera preview doesnt display the camera's best resolution, it looks dull, compared to how it looks when using the native camera of the device.
How can I fix this? I am sing the android's native camera api, and not intent, as I need the API usage to performs some functions with the camera.
 

Read other answers
RELEVANCY SCORE 44

I have been working with BT to ensure all the port forwarding is correct and that there is no issues with the computer HOWEVER , when I want to view the camera ( either internally or externally) I get a blue screen with the white square and red cross in top left

If I right click on and look at source ...I see

<html>
<head>
<title>WebCam</title>
<script language="JavaScript">
<!--
function loadpage()
{
document.TVTOCX.focus();
TVTOCX.SetRemoteAddr(document.location.hostname);
}
-->
</script>
</head>
<body topmargin="0" leftmargin="0" bgcolor="#d9ecff" onload=loadpage()>
<div align="center">
<OBJECT ID="TVTOCX" CLASSID="CLSID:FFFFFFFF-19EB-49E8-BB30-8DE03499D2F0" CODEBASE="NetVideo.cab#Version=2,7,4,4" ALIGN=center width='100%' height='100%' >
<param name="_Version" value="65536">
<param name="_ExtentX" value="24209">
<param name="_ExtentY" value="3942">
<param name="_StockProps" value="0">
</OBJECT>
</div>
</body>
</html>
It is a HTML link and its not encypted ..... what do I need to get this computer/camera viewable over the net ..... any ideas anyone ? BT are saying I need a codec , but I have downloaded several with no difference

We are viewing using differnt computers ie windo... Read more

Read other answers
RELEVANCY SCORE 44

I am doing a reserch paper, and my teacher told me that there was a Sony security camera which came out over two years ago. He said that it was a really good night time security system, but the fault was that in the daytime it showed the people without clothes. Anyways, does anyone know about this camera, and what it is/was called? Also, do you know exactly when it came out and where I can find information about it?
Thank you!
 

A:sony security camera

firsttimer,

Welcome to TSG

Think the teacher is the one that needs to do the reserch on it as it is not true. Sony came out with the video cameras that could see very very good when it was very dark and some how then others started saying you could see tru what people were wearing and it was like x-ray vision.
 

Read other 2 answers
RELEVANCY SCORE 44

I have a router right now. I want to put a security camera outside, but all my hardware is downstairs. It would be very hard to use an Ethernet connection. So, would it be good to put a router in my garage as an access point, and then direct connect a camera?

A:Set up Wireless Security Camera

I may be wrong here, but I think what you might want is a bridge. It would be like an access point to bring a signal out to the garage, and then wire into the camera.

Are there any wireless cameras?

Read other 4 answers
RELEVANCY SCORE 44

Any ideas on some software. I want something that is free to try. I will purchase the full version if I like it. I need it to record onto the computer, would be nice if it deleted the old files, and had access to watch from any computer. I tried using webcamXP but for some reason it will not work anymore.
 

A:Security Camera Software

'Dell with XP' and 'webcamXP' are not very descriptive of your current hardware,
nor having any idea of your personal requirements,
i can't really make any suggestions,
so YOU might look at some of these,
some are freeware, some are shareware [free to try],
.
security camera software
http://www.google.com/search?hl=en&q=security+camera+software
.
video surveillance systems
http://www.google.com/search?hl=en&...ow=1&q=video+surveillance+systems&btnG=Search
 

Read other 2 answers
RELEVANCY SCORE 44

I have been using these Buffalo TeraStations as my back up file storage. I have had 2 of the die in the last month. One had a defective hard drive, it was about 7 years old, and due for replacement, not enough space. The other was only a few years old and the system had a hardware problem. Data was OK, but unit is defective. (it was diagnossed by their tech support).

I also need to replace an old Intellex Security Camera DVR that is still running windows 2000 and the proprietary software is not compatible with Vista.

I was thinking of putting together a new PC that could handle both jobs.

Here are my thoughts.

Intel Quad Core - Not sure which one

One 500GB Hard drive for operating system and software.

2 - 1.5TB Drives for Video Storage - in Raid 0

2 - 1.5TB Drives for Data Storage - in Raid 0

or combine all 4 drives in Raid 10 and then use part for data and part for video.


Any suggestions......

Read other answers
RELEVANCY SCORE 44

I have a wireless camera set up in my house to check on the dogs. I can see the feed in my network fine. I want to access it outside the network.

I set up an account with afraid.org for a free dns service.

I went rummaging around my router pages looking for settings.
I found the camera as a device, with a dns entry and mac address showing under connected devices.

I don't know what to look for from here.

On the afraid.org site when I'm logged in I have a little box that shows the domain/subdomain I set up on mooo.com under "dynamic update candidates".

In my router settings I see a 184 IP address as the WAN address. I also see this same IP address pop up if I click to update the above link on the afraid.org site.

What am I missing? My ISP got me intot he router but won't go any further and I'm lost.

Suggestions?

Thanks
 

A:Help me with Security Camera Feed?

When you say your ISP got you into the router, do you mean into their combination modem and router or do you have a separate router connected to the modem?

The following assumes you have a combination single device modem/router.

You first need to have the camera use a static IP address on your LAN. One way this can be done by setting it's IP address to one that is within the sub-net range of the router, but outside of the DNS range configured in the router. Another method, if supported by the DNS on the router, is have the DNS reserve a specific LAN IP address to the MAC Address of the camera.

You then need to set up port forwarding on the router so that incoming connection requests from the Internet to specific ports, get passed to the ports on the camera. You will need to check the camera documentation for what port or ports are used by it.

Note: You may not be able to check if port forwarding is working correctly using a computer on your own LAN. Some routers do not support this type of loop back function. You would need a computer with an Internet connection outside of your LAN or go through a proxy server on the Internet.
 

Read other 1 answers
RELEVANCY SCORE 44

 I want to change the IP address of my security camera to make it macth with my network, Please somebody help me.

Read other answers
RELEVANCY SCORE 43.6

Hey everyone. I have a home security camera network. It's spread around my house so the farthest I have is a WIFI camera at the back of my house which was not connecting to the WIFI router in the middle of my house and hence I had to get a WIFI repeater.

Now the issue I am facing is that I am able to access all camera's when I am within my home WIFI network but as soon as I get onto my 4g network, the one camera at the back which is connected to my home WIFI through the repeater (not directly to my WIFI router) does not connect.
 

A:Trying to connect to home security camera from outside

Ok so I assume you're using an app of some sort to connect to your cameras? you can also see all cameras except the one wifi camera via the 4G connection? Need a little more information; is the WIFI camera on the same subnet as the rest of your network devices? for example the IPs are all like 192.168.1.x or is the IP totally different (excluding the last octet).
 

Read other 1 answers
RELEVANCY SCORE 43.6

Hi there I was wondering if anyone here has experience with Reolink cameras and the Reolink client. I am using the Reolink client version 7.2.2.12 on a Windows Server 2012. When I open the client on the server 2 of the cameras do not show up unless I manually put them in with add device, every single time. The other 6 cameras load up as soon as I turn on the client. I have tried contacting their support but haven't received the assistance needed. The cameras are all model RLC-410 and POE. The server is connected to the internet via Ethernet. My goal is to have the other two camera's load up as soon as the client is booted up without having to manually add them each time.
Things I have tried include resetting the cameras, updating the client, changing the camera's static IP address to a different IP address, updating the camera's firmware, contacting Reolink support. 
I realize this might be a stretch, just wondering if anyone else has had this problem with the client and found a solution. Sorry if this is the wrong section or I'm missing some information.

A:Reolink Security Camera Client

Reolink Info.
 
Louis

Read other 1 answers
RELEVANCY SCORE 43.6

good evening, thank you all in advance. I'm seeking assistance in reestablishing connection to my security system in my office such as was before I guess something reset. I'm assuming it has to do with port forwarding or the ip address but i am a bit confused to say the least why it will not work, suggestions are appreciated it must be something stupid that I accidentally changed somewhere I just cannot figure it out. Viewing live view from my phone at the warehouse works but not when turn the wifi off.
 

A:Remote security camera access to LAN

Hello Freewolfe, and welcome to TSG.

You will need port forwarding enabled and properly configured on all routers and modems between your security system and the Internet. They will also probably need to be configured to support a static IP LAN address for the security system.

Unless you prefer to wait for a member with clairvoyant powers to further assist you, it would help if you told the brands, model numbers, as well as any hardware and firmware revision levels for the security system and all networking equipment involved.
 

Read other 1 answers
RELEVANCY SCORE 43.6

Not sure if this is the correct form to post in.
About a year ago my apartment building installed security cameras. They came to each apartment and asked if we would like the tech guy to load the IP address into our PC so we could ONLY monitor the cameras. I had it done and thing worked great.

Now they have changed the IP address and I have entered the new IP address and it?s not working for me. It looked so simple when the tech guy did it.

I am needing some friendly instructions.

Thank you
Canan
 

A:Connecting security camera to PC with IP address

Canan said:


load the IP address into our PCClick to expand...

Exactly where did they load the address? Into a bookmark on your web browser, into some type of special viewing software, or somewhere else?
 

Read other 14 answers
RELEVANCY SCORE 43.6

I have security cameras installed at my fitness club. When I watch recorded video, it skips. I've tried lowering the sensitivity really low as well as raising it to the highest point. Both have not worked. I've had a new tower shipped to me and that does not work. I've replaced the camera and that hasn't worked. Any ideas?

A:security camera skipping on playback

It could be any number of things. Try recording some of the video onto a CD or DVD and test on another PC.

Read other 1 answers
RELEVANCY SCORE 43.6

I have this Lorex system http://www.avdeals.ca/lorex/SG6831S.htm that i am trying to make record on a VCR. The instructions don't tell me how to hook it up to a VCR and i am clueless. There is a "remocon" Ethernet port in the back. I assume this means remote connection. So i am hoping this port is streaming out a video feed which i could in turn plug in my laptop and record video on the laptop instead of the VCR. This may be far-fetched, but it was an idea. Is there any hope?
 

Read other answers
RELEVANCY SCORE 43.6

Hi

Don't know if anyone can help me I have a security camera and DVR system installed in my house which I can view remotely by port forwarding on my router and all I had to do was input the IP Address and I could view my system online and it came up on a program called WEB SERVICE. When I try to view remotely now it tries to access the cameras but comes up with an error saying it requires Adata Ltd add on. When I try to accept the add on the system just locks me out so not sure if it is the company seciurity system from preventing me installing this add on.
 

Read other answers
RELEVANCY SCORE 43.6

When I plug in a USB to get some video from it, it disables the mouse completely. Is this a bug or is there just some complicated process to do it? Has anyone come across this problem before? And we don't have the manual, by the way.
 

Read other answers
RELEVANCY SCORE 43.6

I have security cameras that hook up to my computer via a USB cable but the webcamxp program is not working like i want it to. I need it to record the video footage as it comes in, also it needs to be accessible via the web. Anyone have any ideas? Free or pay, I just want to get this working 100%. Thanks in advance.
 

A:Webcam program for security camera

Never used this software, nut thought about it...
http://www.tincam.com/
 

Read other 1 answers
RELEVANCY SCORE 43.6

Ok, I will try to explian this the best I can ...

I am setting up 7 surveillance cameras on my property. I have 7 poles installed at each of the locations with cameras attached to the poles. I've also got a power connection and a Cable (StaticIP address) hook up at each pole. Each camera is attached to a box with the following: 1 switch and one router. Now, like I said... I need to take all 7 of these cameras and be able to monitor all these cameras at the same time from my office which is located anywhere from 1 mile to 10 miles away from a Windows XP Professinal based computer and another cable connection. The problem i'm having is beinbg able to monitor all cameras at the same time on one big monitor.

Please, any help would be great!!
 

A:Help installing security camera network

Read other 16 answers
RELEVANCY SCORE 43.6

I friend of mine bought himself a digital video recording system (second hand,but the original owner swears that it all worked fine) to use with 3 security cameras that are known to work, the system is a ROHS H264 system which he wants to run from his PC, now this system requires an ATI Radeon7000 or above and Nvidia Gforce serials, the graphics card that is in his system is an S3 Graphics Inc Trio 3D, which I have never heard of and sounds ancient. The software appears to install with the graphical control panel but the cameras won't work, it throws up a message saying: IDS_ display_not_supported, and another message saying: (no supported overlay), In device manager there is a yellow question mark next to multimedia controller, do you think I would be right in blaming the ancient graphics card, I'm a little out of my depth with video security systems. Any help would be much appreciated!
Thanks in advance.
 

A:Security Camera Software problem

Wow I haven't encountered anyone actively using an S3 card in about 4 years. Almost forgot about them. I suppose you can try reinstalling the driver. Here's a link but support and drivers for the Trio3d ended with Win98. You are probably better off replacing the card.
 

Read other 1 answers
RELEVANCY SCORE 42.8

My internet connection was lost and after calling Verizon, they talked me through adding a different isp address. Now my internet works, but when I went to my D-view cam (this is where the daily footage is stored for security camera DCS-930L), I can't make the connection. It says COM1 is not working.

I know the camera works through the wireless router, but somehow the connection between the camera and the D-view cam doesn't. What do I need to do to get this working again?
 

A:Verizon changed my isp and now my security camera can't connect

Wow, 251 views and not one bit of advice for me? How do I delete this thread?
 

Read other 3 answers
RELEVANCY SCORE 42.8

I have been trying to play files that I recorded on my "Watchbot 3.0" security camera but I have failed.I have tried VLC and I have brought to a local computer shop but no luck.Is there anybody on here that could get the files playing for me If i send them to you?
 

A:Cant play my security camera video files

have you tried the watchbot software from http://www.watchbotsupport.co.uk/watchbot3/
 

Read other 7 answers
RELEVANCY SCORE 42.8

Hi - this is my first post here at Tech Guy so please bear with me... but our Netowrk has a problem - a missing security camera!

About a month ago our Cab Company's Router decided to 'reset' itself and we lost the Internet feed through Cox Cable. A call to GeekSquad managed to get the Router reset properly and everything seemed ok.

A couple days later our security camera system went offline. Oh it still works, but we can no longer monitor from the back offices over the internal network.

The way it is supposed to work is to pull up 192.168.1.102 in the web broiwser (IE) and we have remote access to the recorder. That address no longer works. (I get the screen that says IE cannot display the webpage. I tried an IPScanner but could not find anything under 192.168.1.xxx that looked like the Security Recorder.

I got the IPScanner from the company that sold us our automatic dispatching software (Steve at TRANWARE) but who is NOT our resident tech guy. That was Bob, who left for another company a year or so ago - his replacement (Walter) is STILL out of country on a 3-week, I mean, 3-4-5? month vacation! Since I am trying to teach myself to pass the CompTIA A+ exam I am the closest thing to on-site support we have. (My BS CompSci is 20+ years rusty) I am not sure who set the camera up, but now I can't find it on the net.

help?

Can anyone walk me through how to 'find' it? I can see that the recorder is running. I can verify the wire is plugged i... Read more

A:Solved: Missing security camera feed??

Read other 13 answers
RELEVANCY SCORE 42.8

Hi,

I'm new here and I'm here because I'm desperate. I bought a home security camera and I bought it solely so I could view my home when I was at work or on vacation. It was very easy to install at home to get it up and running, and was a little trickier for me to set it up as wireless (but I succeeded and was patting myself on the back). But the next step was getting access online.

After much work creating a host name to overcome the dynamic IP issue (through dynDNS) and also doing port forwarding (although I just used port 80; my ISP says they are not blocking ANY ports), I am able to control the camera from work. So I can see a Web page with controls (the same page I could access from home by simply typing in the camera's internal IP #). I'm not completely sure I understand all the connections, but I'm so pleased that I got this far. I tested the controls by turning the LED lights on and off from work and having my husband tell me that they were going on and off at home. So I KNOW I'm close.

BUT, when I click on "display," it doesn't show me the video display. I don't know what else to do?? I'm thinking it might be a firewall here at work, but because I'm able to see everything else (the controls), I don't know. I also know that I'm supposed to need to download ActiveX, but I don't get any prompt for that. A coworker yesterday did get a prompt (I have people helping me from all over because... Read more

A:Newby trying to install home security camera

What is the brand and model of the camera?

What is the software you are using with the camera?

Are you sure you have the latest driver for the camera?

This may sound a little lame; but, have you tried tech support from the camera manufacturer or the camera's software developer?
 

Read other 2 answers
RELEVANCY SCORE 42.8

I use a security DVR with two cameras. My DVR is a no frills economy version without a built in CD burner. It only records in RAW format.You can only export footage to a USB flash drive. I caught a kid doing vandalism to the house. But you can't quite make out her face. I made a bunch of JPEG screen captures and put these on a CD. Then the police impounded the CD long with other information. I also had the police view the moving footage which I was also able to export to and view on my PC with a proprietary HDD viewer software. I have a neighbor who seemed very confident of the girl's identity. But I fear that the police are going to come back and say there is nothing we can do because her face isn't clear enough. There has to be a way to enhance the photo quality to bring out her face. Surely the police have sophisticated software for this? Last night I downloaded this free software that manipulates pixellation, resolution., and other settings But I couldn't get anywhere with it. This is very frustrating. This is the same thing you hear from many other security camera buyers. You can't make out the subject's face. I spent over $600.00 for two cameras and the DVR. Is there some type of software that will accomplish this? This is serial vandalism. So I can't let this slip through the cracks. I uploaded the photo to an image hosting site. Just click on My linkThanks

A:Trying to enhance security camera snapshot of vandal

The quality you have is what it is. There is no magic software to add resolution. Sorry to bare bad news. Besides, I am pretty sure the cops know how to examine video. Hope it works out for you. For the future, it might be time to invest in higher resolution cameras (and infrared).

Read other 1 answers
RELEVANCY SCORE 42.8

I have wireless security cameras on my house. Since I have installed them, I went to use my laptop yesterday and it would not connect to the wireless router, I turned it all off and then back on to reset which I have to do sometimes, no luck. I tried a bunch of different things and it would not connect. Finally I unhooked the cameras so they were not working anymore, and I got onto the Internet. I hooked them back up, and lost the signal again.

I read in the help section that you can change the signal for the wireless Internet. Below are the specs of the camera. Can someone help me change this so I can use both. It is a net-gear router.

Specs:
Multi Channels of Camera to Avoid Possible Interference
4 Channel Operation
2.4GHz frequencyClick to expand...

Thank you in advance.
 

A:Wireless Security Camera's Interferring with Laptop

Try changing the channel on the router. The default is frequently channel 6, try channel 1 or 11.
 

Read other 1 answers
RELEVANCY SCORE 42.8

I'm founder & lead investigaor for a paranormal research group. Wanting to know if anyone is familiar with this type of security camera system. Wanting to know how to delete unwanted video on the DVR? Can the system be set up to record continuously instead of motion detection? How to hookup audio? Any help would be appreciated, Thanks!
 

A:NETROME TETRAGON NT-404 security camera system

Read other 16 answers
RELEVANCY SCORE 42.8

Has anyone tried using WIN7 and any of the Security DVR Cards? if so, which ones are compatible with WIN7?

A:DVR Security Video Camera Recorder Card

I just bought my Win 7 64 Bit computer specifically for use as a DVR.

Purchased a SuperDVR 8 Camera Card and I'm having no luck. I'm very computer savy and so far I'm coming up with nothing. I don't there is a driver for it.

I've googled my fingers off and so far don't see any cards that state Win 7 64 bit compatible.

I hope someone makes one soon, I'm sitting on over $1500 in security camera equipment and I really wanted Windows 7 on this machine.

Read other 9 answers
RELEVANCY SCORE 42.8

I have an M-JPEG security DVR. It will only export moving surveillance footage to a USB drive. The product came with a proprietary HDD viewer software that is supposed to enable you to view the footage on a home PC. But the software is not compatible with Windows 7 Home premium, and I am only able to view exported camera footage in RAW format also.

Why do they even bother selling this crap with useless software?

How can I view RAW format motion picture footage on my PC? Is there a special software I can download from Internet?

Thanks,
Dave

A:How do I view RAW security camera footage on computer

You may try VLC player, adobe, and if those do not work; convert the RAW footage into avi, mpg or any other format you wish.
Have you tried to right click and install with compatibility mode?

Read other 11 answers
RELEVANCY SCORE 42.8

Hello,
I was working with a user at my job today and ran into a bit of a snag. He just recently put in a new ZyXEL Modem/ Router and has a static IP Address from his ISP in the router itself. Let's say the IP is 1.2.3.4. Now Previously I have no Idea of what his configuration was. I am able to configure his router remotley by just typing in the IP address of his router and logging in. Well he said to me that the IP address I was typing in is the IP Address of a security camera he and his bosses use to view from anywhere. Well once the technician from their ISP put this router in and got them online, they forgot to address the camera issue. I logged into the router and found the camera is now getting a private IP. So sure the user in the network himself can get to it just fine and view the live feed. But Not me. I tried for and hour or 2 remotely to get his Camera access to the outside world. Now this Router deal supports full NAT forwarding and what not, but I havent touched that in years. Is there an easy way to easily access this Camera remotely from anywhere? Without installing software or anything?

Thanks!
KYLE
 

A:Solved: Accessing Remote Security Camera

Read other 16 answers
RELEVANCY SCORE 42.8

I purchased a brand new Elitebook X360 1030 G2with 32 bit windows 10. Just tried with a standart user and works witjh MS Hello. Loved it. Then I turned on laptop with another user. Tried HP Client Security for logging in. It looked nice but I realised there is no bluetooth. Also Hello was not working. Yes I read, HP Client Secuirty prevents Hello. So I gave up all setup and turned back to zero point without anything from HP Client security. Still no Bluetooth. It is not working.Still no MS Hello working..  Nobody understand what is going on. I do not want to ask that question HP Turkey because as always there will be NO HELP form them.  I already have more than 350 HP laptop and PCs, servers etc at the company I manage. Althought that, no single help? from HP.  Hope to find some help here in that forum.   

Read other answers
RELEVANCY SCORE 42.8

I am trying to get my SMS,contacts and pictures on my iPhone to be put either onto my computer or onto iTunes and I don't know how to do this.
Any help or advice would be greatly received.
Thanks in advance.
Could you suggest a transfer???
 

A:How can i backup iphone 3GS sms/contact to new iphone 4?

Cucusoft iPhone Tool Kits can also transfer Music/Video from your iPhone, iPad or iPod Touch to your computer.

Backup Photos to Any Folder on Computer
Backup SMS to to Computer with Multiple File Formats
Backup Call List to Computer with Multiple File Formats
Backup Contacts to Computer with Multiple File Formats
iPhone Disk & file Utilities

 

Read other 1 answers
RELEVANCY SCORE 42.4

I am looking for my brother , who needs to install a security camera system that can be accessed from the internet that has night vision capability.He will be leaving the country and wants to be able to view and or monitor his home from the internet while he is away.Can anyone recommend a system that will work for us.
Thanks
 

Read other answers
RELEVANCY SCORE 42.4

I'm trying to login to the security cameras at work. I can get to the page where I'm suppoed to be and installed the add on, but as soon as I type in the username and password IE say's "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". Then at the bottom of the page it say's "A problem with this web page caused IE to close and reopen the tab".

Here's the kicker. I can get in and view the cameras on all the other computers I have here at home. I'm running IE9 on the computer that won't login. That computer OS is Win 7. The other computer that will connect is also running Win 7 and IE9.

I have a laptop running XP (I forget what version of IE it is) and it will also login.

There has to be some setting that I can't find to make this work but I can't find it.

Maybe somebody here has an idea.

Thanks in advance
 

A:Solved: IE 9 Stops and restarts when trying to view security Camera

Well, I solved my problem half way. After Googling every phrase under the sun to try and find an answer to this problem, I decided to try and uninstall IE 9 and then reinstall it. So I found a link at Google and went to Microsoft's web site that showed me how to get rid of IE 9. Here's that link just for kicks.

http://windows.microsoft.com/en-US/windows7/search?q=uninstall+ie9&prd=

So after uninstalling IE 9 I ended up with IE 7. So I tried to login to the security cameras using IE 7, and this time I got right in and everything worked great! As soon as I reinstalled IE 9, I was right back to the same problem.

So there's got to be something up with the firmware and IE 9. It just never stops does it. LOL
 

Read other 1 answers