Over 1 million tech questions and answers.

Cannot start Smart Card services

Q: Cannot start Smart Card services

Hello Folks,



On my windows 7 machine I am not able to start the smartcard services when I try to start it says:

Windows could not start the smartcard services on local computer Error 2: The system cannot find the file specified

though the file exists at location: C:\Windows\system32\svchost.exe

The service is running under a local service account

I tried a couple of things removing the registry for this and creating again with no luck.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Cannot start Smart Card services

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 68.4

Hi all,

I have a problem on a Windows 7 64bit computer. I can't get the Smart Card service to work. Now I tried registering the dll's with the regsvr32 but some of them were unable to load or are probably damaged.

My question is: How can I delete the entire service including all the dlls and other files associated with that server and do a "clean install"?

I have been looking around and came across this cmd below. However I couldn't find caller.inf in the inf dir. Is it standard present in Windows 7 or not?
sysocmgr.exe /i %windir%\inf\caller.inf


Thanks in advance

A:Reinstall Smart Card Services

If you suspect that system files are corrupt, you could run sfc /SCANNOW from an elevated command prompt.

Read other 4 answers
RELEVANCY SCORE 60.4

when trying to connect to a vpn error keeps popping up saying smart card resource manger is not working how do I fix this

Read other answers
RELEVANCY SCORE 53.2

I just received a SCM Smart Card Reader/Writer, model SCR201, and it will not start on my computer. I put it in my wife's Gateway, and it works fine. Main difference is she has IE6, and i have IE7. Any help on this one? I already tried installing the driver from the manufacturer, which was of course to no avail. Now it won't let me roll-back to the previous "Windows Driver".
 

A:PCMCIA Smart Card Reader "This device cannot start. (Code 10)"

Read other 8 answers
RELEVANCY SCORE 52

Hello everybody,

I would like to know if there is a smart way to manage services in windows seven. If I want to disable some services in windows 7 and speed up my comupter, I need to spend several hours browsing through the services and read about every single service listed. This way I know what I am exactly doing.

The problem is that the above mentioned method is very time consuming. Is there a better way to manage services in windows seven?

Thank you in advance,
Lord of Rings

A:smart way to manage services in windows 7

Normally disabling services will not significantly improve performance. You are far more likely to cause problems. The problem is that there is no publicly available documentation anywhere that full describes what each service does. Many do more than the documentation in Service manager states. All documentation you will find is incomplete.

The best way to manage system services is to leave them alone unless you have a specific need to do otherwise.

Read other 6 answers
RELEVANCY SCORE 51.2

I get the message "Windows\system32\services\services.exe" at start up twice. Browser previously hijacked by coolsearch, etc. I already ran CWShredder. Below is my log. (Note: I altered the domain name in last 3 values for security reasons.)

Also, Acrobat 6 no longer opens *.PDF files within Internet Explorer.

Thank you in advance!

Logfile of HijackThis v1.97.7
Scan saved at 6:24:21 PM, on 5/12/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\NavNT\defwatch.exe
C:\Program Files\NavNT\rtvscan.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\ofps.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\pctspk.exe
C:\Program Files\Adaptec\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\PROGRA~1\Logitech\MOUSEW~1\SYSTEM\EM_EXEC.EXE
C:\Program Files\NavNT\vptray.exe
C:\Program Files\Common Files\ACD Systems\EN\DevDetect.exe
C:\Program Files\Sharp\Sharpdesk\SharpTray.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Adobe\Acrobat 6.0\Distillr\acrotray.exe
C:\Program Files\Sharp\Sharpdesk\sdFTP.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program File... Read more

A:[Solved] Windows\system32\services\services.exe message at start up

Read other 6 answers
RELEVANCY SCORE 50.8

Hi, I hope someone can help. Many family member surf the web on this computer and I thought it was well protected (too many to list) but I have some strange things going on. I get the message "Windows\system32\services\services.exe" at start up twice. Browser hijacked and other fringe benefits, LOL here is my log and Thanks in advance.
Logfile of HijackThis v1.97.7
Scan saved at 11:19:02 PM, on 4/30/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exe
C:\WINDOWS\system32\drivers\dcfssvc.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\DefWatch.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\Rtvscan.exe
C:\WINDOWS\System32\ScsiAccess.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\System32\wuauclt.exe
C:\windows\system\hpsysdrv.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb05.exe
C:\Program Files\Microsoft Hardware\Mouse\point32.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\Common Files\AOL\ACS\AOLDial.exe
C:\Program Files\QuickTime\qttask.exe
C:\PROGRA~1\COMMON~1\AOL\AOLSPY~1\AOLSP Sch... Read more

A:Windows\system32\services\services.exe message at start up

Read other 7 answers
RELEVANCY SCORE 50.8

Few months ago I wrote an application for The Windows Club and might as well post it here for anyone hasn't come across it yet.

There are many registry tweaks out there that tweak the Windows Services, so I decided to put together an application that automatically tweaks the Windows Services without using the Registry. Almost all the tweaks are based off of recommendations from BlackVipers website. The only application out that gives you the option to automatically tweak the Windows Services as a whole. Includes
Safe Settings (used by most users), Tweaked Settings (little more advanced), and Advanced Settings (These are for the experienced users). All the settings can be found via BlackViper.


Supports 32/64 Bit for Windows XP SP3, Windows Vista and Windows 7

or my Deviantart page:
LeeWhittington's Gallery

A:SMART Windows Services Automatic Tweaking Utility

looks like a good program so i have to ask how do you create a program even a basic one?

Read other 7 answers
RELEVANCY SCORE 48.4

i have done a lot of googling and i still don't understand what are they good for but i have a feeling they r some sort of old data storing devices like the floppy disks. anyway here is the picture of the smart card reader http://www.mega.pk/items_images/4962Dell_Latitude_E6420_496a.jpg its the long horizontal slot . i read a lot of confusing topics of people talking about smart cards of phones and cameras , im interested in knowing what the laptop smart card reader is good for , or the other thing the pcmcia ,
 

A:Solved: what the heck is the smart card and PCMCIA card slot

Read other 11 answers
RELEVANCY SCORE 48

64 bit emachines desktop PC running Home Premium, direct wire connection to a modem.

It boots normally, it just doesn't connect to the internet. Many of the services are disabled.

I have done a startup repair with and without a disk (the CD we have is NOT from emachines - it's a standard Windows 7 Home Premium 64 bit disk. The repairs never find a problem. I have done an sfc /scannow. No intefgrity violations were detected.

When I run services.msc I see that DHCP Client is not running. When I attempt to start it, I get that it could not start because the dependency service or group failed to start. If I go to properties and click on Dependencies I get a Win32 error - the service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

I get the exact behavior when I try to start DNS Client.

There are no restore points available. There are no viruses or malware according to TDSSKiller, Malwarebytes and ComboFix. When I try to use Internet Explorer I get the 'page cannot be displayed' . When I then click on 'Diagnose Connection Problems', I get 'Troubleshooting Couldn't Identify the Problem.'

There's about 50GB worht of music and videos on this PC and the idea of saving all that externally, plus the drivers, reinstalling and putting everything back is a lot of time and work.

I was looking for something that used to be available in Windows XP, where you'd pop in the CD, boot from it, hit enter to do an insta... Read more

A:How do I Fix the Windows Services - Many in services.msc won't start

You might be at the point where a Repair Install is in order:

Repair Install

A Guy

Read other 4 answers
RELEVANCY SCORE 47.2

i have a few pics and video clips from my logitech 510

i read this thred but i don't have a card reader to use that rog.

http://forums.techguy.org/digital-p...inolta-dimage.html?highlight=recover+pictures
 

A:pls help me recover pics from my smart card card

Read other 13 answers
RELEVANCY SCORE 46.4

My brand new Dell laptop keeps losing its active window focus. I have tried to pinpoint the problem to a service or startup and did not find anything specific.
I am now checking the System logs and I see things like :
The Windows Modules Installer Service changes every couple of seconds its start mode from demand to auto and from auto to demand. There are almost 20 changes from one state to the other in 2 minutes.
The Computer browser service starts/stops several times in a few minutes.
The Multimedia Class Scheduler service starts/stops every 3 or 4 minutes.
Is this normal ? How do I troubleshoot this ?


Following with my previous post, here is from my log just a couple of minutes ago


Code:

Information 24-Jul-11 06:42:02 AM Service Control Manager 7036 None
Information 24-Jul-11 06:37:01 AM Service Control Manager 7036 None
Information 24-Jul-11 06:32:51 AM Service Control Manager 7036 None
Information 24-Jul-11 06:27:50 AM Service Control Manager 7036 None
Information 24-Jul-11 06:24:28 AM Service Control Manager 7036 None
Information 24-Jul-11 06:19:26 AM Service Control Manager 7036 None
Information 24-Jul-11 06:15:08 AM Service Control Manager 7036 None
Information 24-Jul-11 06:10:06 AM Service Control Manager 7036 None
Information 24-Jul-11 06:09:57 AM Service Control Manager 7036 None

Each one of this is the Multimedia Class Scheduler service that enters the stopped state and the following is the same service entering the running state. Here is the full ... Read more

A:services start/stop or change from autostart to demand start

You might want to check in Event Viewer for some clues, but as it's a brand new computer I think you need to contact Dell Support as well.

If you want more information on any particular event, just select the Details tab.

Read other 3 answers
RELEVANCY SCORE 46

Hello,

i have xp home running on another laptop and someone in my family was messing around with itunes and ipods and tried to remove these programs.

When they restarted the computer the internet was not connecting and when i looked into it i found that basically all the services in computer managment are now disabled.

When i try to start any, including network connections for the internet i get the message:

Configuration manager: The plug and play service or another required service is not available.

There are no system restores before this happened so how can i get these services working again?

thanks
 

A:No services start including network connections and cant get them to start!!

Read other 12 answers
RELEVANCY SCORE 46

start>control panel>administrative Tasks>Services

So I went there after some suggestions by some members on here, and tried to turn a few programs automatic(not the delayed start) but when I tried to start some of them, I got this message:

Error 1068: the dependency service or group failed to start

So is there a way to fix this?

A:Error 1068 failed to start when trying to start services

Yes, possibly possible! What are the names of the services you are dealing with?

Double click the service - go to the "Dependencies" tab - Check the service names list under "This service depends on the following system components" and then make sure that all the services listed there are already started.

For example, if you're trying to start a service which has dependency on "Windows firewall" service, you need to first make sure Windows firewall service is STARTED.

Read other 5 answers
RELEVANCY SCORE 45.6

Hi Team,

I am getting below error when I try to install an application.
Application installed fine on my local Win 10. Issue is with the Virtual Machine I have setup using VirtualBox.

VM OS I am using is win 7 and win 8. Both have the same issue.
I tried running the application as "Run as Administrator" but still no luck.
below is the event log of windows.





-

System














-

Provider











[
Name]
MsiInstaller


















-

EventID
11920











[
Qualifiers]
0




















Level
2



















Task
0



















Keywords
0x80000000000000

















-

TimeCreated











[
SystemTime]
2016-08-07T10:53:11.000000000Z




















EventRecordID
465



















Channel
Application



















Computer
PANTHER

















-

Security











[
UserID]
S-1-5-21-2601561693-1348493304-1030181968-1001













-

EventData











Product: ScaleOut
StateServer x64 Edition -- Error 1920. Service 'ScaleOut StateServer' (SOSS)
failed to start. Verify that you have sufficient privileges to start system
services.










(NULL)










(NULL)

... Read more

Read other answers
RELEVANCY SCORE 45.2

Thought it would be cool to do, since some software allows you to encrypt data and use a smart card to unlock data. Tried finding out if it was possible to turn an SD card into a smart card, but couldn't find anything. That makes me think there isn't a way, but thought I would ask anyways. Seems like there would be some software to do this, but I didn't find anything.
 

A:Turn SD Card Into Smart Card

Hiya Football101
Looks like you have a new project on your hands. LOL
Try this site...
www.safehousesoftware.com/Manual/User_s_Guide/How_to_Create_a_Virtual_Smartcard.htm
Good luck
 

Read other 1 answers
RELEVANCY SCORE 45.2

This has been bleeping bugging me for a while now. No matter how hard I try, I can't seem to configure msconfig to start to Normal Startup. This is what happens: If I select "Normal Startup", "/safeboot" and "minimal" are automatically selected. If I deselect "/safeboot", then "Selected Startup" is automatically selected. Furthermore, some of my services -- primarily my printer -- do not start and when try to start it manually, nothing happens. Does anyone have any suggestions?

A:Can't Start in Normal Mode, Services Won't Start

Sorry, I'm confused. Why are you messing with msconfig in the first place? And EXACTLY what have you done so far?

Read other 5 answers
RELEVANCY SCORE 44.8

I have the same exact same problem as posted by Metamorph69 ,and helped by Gringo ,the only difference is that I have no files of importance I don't know if it makes it easier just to wipe everything ,in which I don't no how to do .My  computer runs fine I believe except for that pop up at boot which comes up on right hand side of screen saying  I have x amount of errors please register to full version at isharpsoft registry cleaner pro to  clean and fix remaining errors on your pc, I have ran malware remover which it did remove  several bad malwares and several antivirus scans to no luck Thanks in advance for your help

A:Smart Pc Fix Pop Up At Start Up Please Help

Hello djlnyc I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", ... Read more

Read other 27 answers
RELEVANCY SCORE 44.8

Hi, i found in my smartcard slot an device who has an gradation, can you say if on this device i can put a analogycal  thermometer who has been show me the CPU temperature? I have an Dell Latitude e5430! Thanks! 

Read other answers
RELEVANCY SCORE 44.8

I'm having great difficulty finding a smart card for my Toshiba A205. It's the one shapped like an "L" sort of and there just isn't a listing anywhere. Any suggestions ??? Thank You in advance.

A:Smart Card

Hi -

What is the exact model of your system.... A205-xxxxx ?

See p 133 of this Satellite A205-S4537 "users guide" --> http://cdgenp01.csd.toshiba.com/cont...vB_07Feb26.pdf

I am not familiar with the "L-shaped" card you speak of. Where did you obtain the one you have? Can you take a picture of it & attach to post?

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 44.8

A person has changed settings in password policies like "prompt password expire in 14 days" in Administrator tool. When i try to log in it does not accept the password and gives me the message " unable to log you on because it is required that you use a smart card to log on, please contact your administrator". I don't know what what i changed made. I can't entered from Admin account as well. How do I undo this change?
 

Read other answers
RELEVANCY SCORE 44.8

Ok I have found another problem. I had my computer worked on and he re-installed windows xp. Before it was worked on I was able to insert my memory card from my digital camera ( I don't have the plug for the camera to upload pictures that way) and Nero always popped up. I think it was drive E. Now nothing is happening when I insert the memory card. I am able to use my external hard drive and it comes up as drive E. I believe my laptop has a built in smart card, but it is not showing.

A:Smart card

I believe you may have to reinstall the drivers.

First look in Device Manager with your camera plugged in
and see if there are any yellow exclamation symbols there.

May only be necessary to uninstall and reboot.

I have to log off now, hope someone else can help if OP replies.

Read other 1 answers
RELEVANCY SCORE 44.4

Having trouble with Nero 8 Start Smart.
Since my computer crashed a week ago.
When it begins to load i get an error message :
"unable to create xml parser instance please reinstall microsoft xml core services 4.0"
When i click ok Start Smart start page starts up.
The launch applications is blank, whereas before i had a list of applications.
When i click on add/remove, it is also blank.
Thank You,
Gary Teresi
 

A:Nero 8 Start Smart

Read other 11 answers
RELEVANCY SCORE 44.4

I have Nero 8 installed.
I'm having trouble w/ Start Smart the Start page is not showing any items in the Launch Applications box.
When i click on Add/Remove i get a blank page that pops up .

I have an attachment of the page but do not know how to upload onto this page.
Please help.
Thank You,
Gary Teresi
 

Read other answers
RELEVANCY SCORE 44.4

Looking for a Compaq Smart Start CD 5.50 iso download. I tried getting it from the compaq site an seen that its not there any more for some reason. Any help will be appericated.
 

A:Compaq Smart Start CD 5.50

Read other 12 answers
RELEVANCY SCORE 44.4

I have nero start smart 6 software and have had more problems with it.I keep getting a message that says burn process failed.What's up?

A:Nero start smart

Need more details but it may be the CD/DVD burner otherwise try reinstalling Nero. Exactly where does the process fail? (After caching the files or what?)

Read other 4 answers
RELEVANCY SCORE 44.4

Im unable to boot from the cd drive that I have in my unit. Thing is that I had seen you could put the smartstart app on to floppies an boot from it. I have smart start ver 5.50
 

A:Smart Start CD to Floppies

squall_01 said:


Im unable to boot from the cd drive that I have in my unit. Thing is that I had seen you could put the smartstart app on to floppies an boot from it. I have smart start ver 5.50Click to expand...

Interesting....but most recent computers don't have floppy drives.
My new Compaq doesn't even have a port on the motherboard to install one.

I added a floppy drive to a computer whne I built it 3 years ago.... just for insurance the day I might need it....but in 3 years I've never used it once.
 

Read other 2 answers
RELEVANCY SCORE 44.4

In Nero where do you go to burn a dvd, which icon thingy is it?? Does anyone who has the program or had it or knows know?? Cuz there's like a million icon thingies and there's a bunch of them for dvd and I'm not sure which one it is exactly.. can someone tell me how to burn a dvd in Nero step by step where to go what to press, I'm new to this program and I don't know what to do.

-Thanks.

A:Nero Start Smart

http://www.nero.com/enu/support-nero...ials-data.html

Read other 1 answers
RELEVANCY SCORE 44.4

Could you tell me the difference between "data burning" and "burn data disc" as shown in my screen shot of Nero Smart Start? "data burning" is on the left and "burn data disc" is on the far right. When i go to "data burning" and add files the burn goes to 50% and fails. When i go to "burn data disc" and add files the burn completes successfully. It seems to me that both are " burn data disc". What`s the difference please" http://img23.imageshack.us/my.php?image=databurning.jpg

A:Nero Smart Start

Well this is really two questions. One is, what is the difference between Nero's use of the two phrases, and the other is Why does your data burn fail at the half way point.

I did a bit of research.

http://forum.my.nero.com/index.php?showtopic=1190


Quote:




Hi,
you can burn Data Disc with Nero Burning Rom. Data Disc means, you are able to burn all Datafiles (pictures, music, docs...) to this Disc Compilation.
In Nero Burning Rom it isn?t called Data Disc. But if you use CD/DVD-ROM you?ll get the same result as with Data Disc in Nero Express.
Also it is possible to set all the special settings you like, wich is not possible in Express, as you said.

I hope this information will help you.

Kind Regards, The Matrix.




Think part of the problem is that one feature is only available with Nero Express, and doesn't work with plain-old Nero. How that works with Smart Start I cannot say. You might get more meaning from the quote than I did.

I use Nero, and I'm pretty sure there is a burn log which should mention something about possibly why the burn failed. That might be useful. You might have a missing component, or a critical component got corrupted somehow. Add/Remove Programs may have a "Repair" option, or at least you could uninstall Nero and then reinstall.

I'll also mention that I've used Nero for years, and it has WAY too many options and buttons. I don't use the Smart Start thing at all. Everything I ... Read more

Read other 2 answers
RELEVANCY SCORE 44.4

I'm looking for Compaq Smart Start CD that goes with the Copmaq Prosignia 300. Other then that I am not too sure myself so if need be will provide as much as I can.
 

Read other answers
RELEVANCY SCORE 44.4

i use a windows 98 start up disk with smartdrive on it to reformat hard drives and i messed one of my start up disks and made another one... well this one is saying (when i restart windows with the disk in there) that there is an I/O error can anyone tell me what that means? and where i can get an actual copy of a start up disk with smartdrive on it? i really really really appreciate all the help guys... i'm having some real problems tonight and you guys are helping me a lot... thank you so much!
 

A:start up w/smart drive

Read other 6 answers
RELEVANCY SCORE 44.4

Hi all,

I've installed Windows 7, and had a problem using smart cards with the new OS.

I installed the drivers for my smart card reader (USB) from the manufacturer's website, and they installed fine.
Then when I go to plug in my reader, it says "Device driver software was not successfully installed" and it then says that the reader is correctly installed, but "Smart Card X No Driver found".

So I tried communicating with the reader and inserted card, and the communications is fine. So my only real issue is that every time i plug in my reader, it prompts me with "Not successfully installed" despite the fact that I've correctly installed the drivers.

Any ideas? Thanks.

qin23

A:Smart Card drivers

Welcome to Seven Forums. It would help us to know the exact card reader your refering to, as well as for you to fill in all your system specs. Top of page user CP scroll down to edit system specs and fill all them in. Here are a couple programs to help with finding out all your specs.Speccy - System Information - Free Download or |MG| HWiNFO32 3.55-838 Beta Download Please include 32 or 64 bit Windows Seven. I think you'll get more replies once you have done this. Thanks. Fabe

Read other 6 answers
RELEVANCY SCORE 44.4

Hello Community! Reading the RGS 7.2 manual, the section on Smart Card authentication implies that the feature is restricted to Windows receivers. Does the sender have to be a Windows system too? For example, could I use a Windows receiver with a supported smart card reader to forward that information to a Linux sender? Thanks!

Read other answers
RELEVANCY SCORE 44.4

Dears,I need to use smart card function. Although  I can hear system alarm when I insert smart card into SC slot , I donot know what to do next. I use ProtectTools security to setup smart card but save button is disabled. Any one can help with step by step solution or any other Doc.Regards, 

Read other answers
RELEVANCY SCORE 44.4

hello, i would like to activate smart card reader on my hp elitebook, SC is on bord but what drivers should i install to recognize my card? operation system is: windows 7 64 bit andubuntu 16.04  

A:smart card reader

Hi, For Windows 7, please try (Security software section):    http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4097215&swLangOid=8&swEnvOid=4060 Regards.

Read other 1 answers
RELEVANCY SCORE 44.4

Hi
I need some help.  After connecting my account with Microsoft, I keep getting the message 'Connect a Smart Card' whenever I need to access 'Change User Account Control' menu or installing a software.  I don't have this issue before linking the
account and how do turn this off?
Please help.  Thanks.
Cheers!

A:Keep asking 'Connect a Smart Card'

You can disable the Smart Card Logon by using the Local Group Policy management console.
Start --> Run --> type gpedit.msc and press Enter.
Navigate to:
Computer Configuration\Administrative Templates\Windows Components\Smart Card
Right-click Turn on Smart Card Plug and Play service and click Edit.
Then select Disabled.

Read other 3 answers
RELEVANCY SCORE 44.4

I Have a 2008 server installed with active directory and updated with CA.I am trying to register an axalto cryptoflex smart card for user log on in vista this card is listed under registry[hklm/software/microsoft/cryptography/calais/smartcards].I want to know how to use this card for logon in vista

Read other answers
RELEVANCY SCORE 44.4

Has anyone attempted to add a smart card reader to an existing P50 (Type: 20FL)?  In doing some research online, I found that part number 00UR884 listed.  I ended up chatting with Lenovo Support and they provided a different part number, 04X5393 (which also has a substitute listed, 00HW553). I found the following set of directions, https://support.lenovo.com/us/en/documents/PD101157 I'm curious if anyone found these instructions difficult to follow and which part number you ultimately ordered (I assume they all come with the cable).  They look like they are in the $35 range for price. Thanks, john

Read other answers
RELEVANCY SCORE 44.4

Im trying to write some smart card software using OCF, but I'm stuck at the beginning

here is a part of code:

CardRequest cr = new CardRequest(CardRequest.NEWCARD, null, FileAccessCardService.class);
SmartCard sc = SmartCard.waitForCard(cr);

I'm getting following exception:

PCSC Exception in method SCardConnect: PC/SC Error SCardConnect return code = 8010000b

Can anyone help? What am I doing wrong?
Thanks.
 

A:OCF and smart card problem

Anyone?
 

Read other 2 answers
RELEVANCY SCORE 44.4

I need some Drivers for my computer I bought at Cyberpower pc. It's an x- infinity case. It's about 5 years old. They said they don't have the driver's anymore. Wondering I somebody here has them. Drivers for the USB smart card.

Thanks
Dan

A:smart card drivers for XP

Welcome to "seven" forums bigblockcutlass: If your running windows 7 we are going to need the manufacturer of the card reader iin order to try and find drivers for it that might work. But in all honesty 5 years old it's not looking good. It also helps to fillin your system specs in your user CP top of page then go to edit system specs list all the hardaware that's in your system. Thanks Fabe

Read other 2 answers
RELEVANCY SCORE 44.4

I get it, you can use a smart card to log in, encrypt/decrypt etc. But is there anytning else you can use it for?Thanks

Read other answers
RELEVANCY SCORE 44.4

went from me to xp. Now can't use my smart media card-won't install-need new drivers or new program??

Thx.
 

A:Help smart media card

check the card readers manufacturers site for a driver update.
 

Read other 1 answers
RELEVANCY SCORE 44.4

I think this is somewhat a studpid question.Does my ThinkPad T450 have a smart card reader? It looks like this: http://www3.pcmag.com/media/images/467768-lenovo-thinkpad-t450s.jpg?thumb=yAnd I don't know how to find out.

A:Do I have smart card reader?

Hi,
 
Go to SUPPORT (above) and enter your MT-M (like 20BW-Z0CJUS as an example) but without spaces or hyphens in the search box.  It should give a list of features in "machine info".
 
Alternatively enter your MT-M here:  Parts Lookup for a very detailed bill of materials.
 
Z.

Read other 1 answers
RELEVANCY SCORE 44.4

My laptop has the smart card error i sent to hp they sent it back not fixed how do i restore it

A:smart card error

andrewgrif789 Sorry, but this is just a community self-help forum staffed by volunteers.  We have nothing to do with HP Tech Support or the work done by HP Service Centers. You will need to contact HP Customer Support directly to speak with them about this problem. If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlNOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while! Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol on my post to say thanks.If my posts solved your problem please click "Accept As Solution".========================================================================

Read other 1 answers
RELEVANCY SCORE 44.4

In my firm we have PKI 2008. Its work fine. But on one computer when I try to logon I have message:
The account has been restricted contact your system administrator
I dont know how to fix it.
 

A:Smart Card Logon

hiya,found this.
Sign on the the pc using local pc Administrator account.

Right mouse click MY COMPUTER PROPERTY COMPUTER NAME. Click CHANGE. Under MEMBER OF, click on WORKGROUP & key in WORKGROUP. Click OK. Then restart the pc.

Then sign in again using local pc Administrator account.

Right mouse click MY COMPUTER PROPERTY COMPUTER NAME. Click CHANGE. Under MEMBER OF, click on DOMAIN & key in the domain name. Click OK. Then restart the pc.

The user should be able to logon to the domain w/out problem.
 

Read other 1 answers
RELEVANCY SCORE 44.4

Hi guys.
 
My laptop has Smart Card reader. Could you recommend a free software to install virtual Smart Card. At first I'd like to test this functionality using some software. How many password can I store on real Smart Card. I need 10-20  password for Remote desktops and hdd crypted by bitlocker

A:Virtual Smart Card

Tom3636,
You can click the links below for information on Virtual Software.
Virtual Software Information
Authentication / Smart cards
Virtual Smart Card Tutorial Information for Creating

Read other 1 answers