Over 1 million tech questions and answers.

windows 10 error while loading resource DLL power manager gauge

Q: windows 10 error while loading resource DLL power manager gauge

Subject error appears on starting of windows. please provide solution.
regards

Read other answers
RELEVANCY SCORE 200
Preferred Solution: windows 10 error while loading resource DLL power manager gauge

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 80.4

Hello, Anyone has experienced that the power manager guage is call out easily from the task bar while click the "Up Triangle" at the right hand corner for finding Win7 WiFi connection icon. I have been annoying many times and close it again and again. Could you have solution to aviod this happen except to disable "Show the power manager guage at task bar" my michane is x201; OS: Win7 PM 32-bit; Lenovo  Power Manager 3.40 Thankstlee

A:problem with power manager gauge

Aim better?

Read other 3 answers
RELEVANCY SCORE 79.2

The battery gauge on my power manager greyed out with dashes and doesn't show when I'm plugged in. Nor can I move the performance-battery life bar when I open the power manager.

Read other answers
RELEVANCY SCORE 79.2

Before I delve into my inquiry, I want to apologize if this has been discussed and figure out elsewhere already and, if so, would request being pointed in the proper direction..I have a Thinkpad T530 2359CTO. If you unaware, this comes with the Nvidia NVS 5400M non-integrated graphics card. I recently updated the Nvidia card's driver and noticed something...When Lenovo's Power Manager is run on Basic mode, within the Power Mode tab it has the "Intel Turbo Boost Technology" and a button to enable or disable it. It also would display two gauges (CPU usage in blue and GPU usage in green).When playing a computer game (for example Need for Speed), it would show that the GPU has been engaged and tapped and shows its usage through the gauge. For the CPU, it (apparently) does a bit of overclocking where the fan speed goes to MAX and performs at up to 117% (as seen on the gauge). After updating my Nvidia card's driver, I've noticed that the GPU gauge that used to display is not there anymore! Just black space where it used to be. I can see the CPU gauge still.I tried reinstalling the program, installing the power management driver (i'm not sure if it has anything to do with the Power Manager or not...), and of course, the Nvidia driver is up to date (because that's what started this whole thing).My main question is whether Lenovo knowlingly stopped support of this feature, plans on bringing it back, or is this a bug and I have some troubleshooting to do? I also would like to know if a... Read more

A:Power Manager & Nvidia gauge (missing)

I *think* it was discontinued because the GPU gauge would force the discrete GPU to be active when Power Management was running, regardless of whether a program actually needed to use the discrete GPU.Not 100% sure, though.

Read other 2 answers
RELEVANCY SCORE 73.6

My Lenvo X1 Carbon just went through a big Windows 10 update to version 1511, Build 10586.14 Now whenever I open the control panel I get a warning dialog box titled "Power manager" with the text "An error occurred while loading resource DLL." i have tried uninstalling and reinstalling the Lenovo power driver vrs.10.67.10.20 and the problem still occurs.How do I correct this?











Solved!
Go to Solution.

A:Power Manager "An error occurred while loading res...

We have this problem on a ThinkPad Yoga S1 running Windows 10.  The machine is brand new with a fresh upgrade to Windows 10.  I've un-installed the things relating to Power Management and Power Manage Gauge and then re-installed them through Lenovo's "System Update" -- still comes back on boot-up every time. Does anyone have the solution for this?

Read other 4 answers
RELEVANCY SCORE 66.4

I get this error on start up. also get: failed to load language resources....
also I would like to remove the sign on screen on start up. running XP home edition on medion computer. can someone help?
 

Read other answers
RELEVANCY SCORE 64.4

On a Windows 8.1 laptop I've started getting (about once per week) clusters of 6-12 NTFS Error 134: "The transaction resource manager on volume C: encountered an error during recovery. The resource manager will continue recovery." It does not happen
only when restarting, and seems unconnected to any particular activity. The computer functions normally, with no other signs of trouble.

Here's what I've tried:

Chkdsk /r (no errors)sfc /scannow (no errors)fsutil resource setautoreset true c:\There are no files in the %Windir%\System32\SMI\Store\Machine folder (checked for hidden files too)There is plenty of hard drive space.I ran a third party hard drive checker (HD Tune Pro) that found no errors.
One question regarding the phrase "encountered an error during recovery." Recovery from what? The computer wasn't restarting, or doing anything that I could see.

The steps above came from several sources, some of which were directly relevant to the NTFS 134 error, others which were relevant to Transaction Resource Manager errors:
Superuser
Microsoft.com

While preparing to clone the disk (which has not been completed for unrelated reasons) I also turned off Hibernation, the swap file and System Restore, then defragged. That seems to have decreased the freqeuncy of the errors, but they still occur in clusters
of 6-12 at a time.

Read other answers
RELEVANCY SCORE 62.4

Can someone please suggest what I might do to solve my problem? During Windows start-up I get come up the two error templates I've detailed. I can get rid of them easily enough and the PC continues to start OK, but for about 10 - 15 minutes runs rather slowly. If I open a programme it is VERY slow to further open [say a specific e-mail within a list of new ones, or, a particular document within WORD. Worst of all is opening an e-mail which has a link to a website. The link shows as you would expect, but to get through to the relevant website often takes 5 or more minutes. I'm told I have software which isn't running through its start up properly as Windows opens, probably something which hasn't loaded or been removed / deleted properly [by me], but WHICH software? How can I identify it and delete it properly? I've tried Registry Cleaners and they don't [at least so far] make any difference. Thanks for any suggestions !

A:Slow indexing problem codes -"Error in loading string XML is 2" & Resource DLL failed

Bleeping Computer DOES NOT recommend the use of registry cleaners/optimizers for several reasons: Registry cleaners are extremely powerful applications that can damage the registry by using aggressive cleaning routines and cause your computer to become unbootable.

The Windows registry is a central repository (database) for storing configuration data, user settings and machine-dependent settings, and options for the operating system. It contains information and settings for all hardware, software, users, and preferences. Whenever a user makes changes to settings, file associations, system policies, or installed software, the changes are reflected and stored in this repository. The registry is a crucial component because it is where Windows "remembers" all this information, how it works together, how Windows boots the system and what files it uses when it does. The registry is also a vulnerable subsystem, in that relatively small changes done incorrectly can render the system inoperable. For a more detailed explanation, read Understanding The Registry.
Not all registry cleaners are created equal. There are a number of them available but they do not all work entirely the same way. Each vendor uses different criteria as to what constitutes a "bad entry". One cleaner may find entries on your system that will not cause problems when removed, another may not find the same entries, and still another may want to remove entries required for a program to work. ... Read more

Read other 1 answers
RELEVANCY SCORE 59.2

My lenovo bettery gauge has turned grey and is not showing the battery status and the plug icon is always on even if I'm unplugged. What's more, whenever I open Lenovo Power Manager, the performanve vs. battery life bar always goes back to a specific position even though I try to change it. How can I fix this?Lenovo T430s i7 8GB RAM

Read other answers
RELEVANCY SCORE 58.8

I am getting the blank screen with mouse only. When I press ctrl alt del I get the windows lock this computer ect. When I choose task manager it does not load. I can't find my system recover disc, safe mode is the same result. I tried safe mode with command prompt typed explorer.exe it said access denied.
I do not have a Vista OS disc since laptop came pre- loaded with vista. I don't I would appreciate any help.
Oh I also wanted to know if I make a vista system recover disc from one of our laptops at work will work on mine?

Read other answers
RELEVANCY SCORE 58.8

My laptop running on vista 32bit home premium .... it's suddenly stop working and it stays at microsoft windows loading bar forever and ever. I tried restoring, repairing,ran chkdsk and sfc /scannow.

Ran system scan (SFC/scannow).

Got message:

"Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

I am attaching the CBS.log and CBS.persist log

Appreciate any help from one of our most valued vista experts.
Britto

A:Vista hangs at Windows Loading Bar... Resource Protection found corrupt files

Welcome
Just boot with a recovery CD and follow instructions
If you create a recovery DVD, you may be able to boot to recovery options
Create Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.

Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that cam... Read more

Read other 10 answers
RELEVANCY SCORE 58.8

First,
I apologize if this is a really basic question or already answered, I promise I did search, but I may be missing it.

Question; I am installing more RAM in my system, and want to monitor the page file for improvement/reduction in size and use. Other than performance monitor, can I see the page file in either task manager or resource monitor?

A:Monitor Page file in task manager / resource manager

In resource monitor you can.

Read other 1 answers
RELEVANCY SCORE 55.2

Hello. I'm having issues with my t450S not being able to go in to sleep mode. Everything I've read says that these two programs have major issues with Windows 10 and could be the source of my problem. I go to uninstall and it says that the program can't run on this version of Windows. Ok, so I have tried many of the solutions offered in this forum and nothing has worked thus far: * c:\swtools\readyapps\pwrmgrv\setup.exe -l0x9 -AddRemove* change compatibility mode of programs and try then* straight up add/remove button Please let me know what I can do to get these off my system (without reverting back to Windows 7).  Thank you! 

A:Windows 10 can't uninstall power manager or fingerprint manager

Welcome to the hole to nowhere. I assume you read that 45 mile long post to nowhere,with a zillion fix recommends.Use your time more wisely.(1) Buy SSD and SSD bracket for your machine.(2)Install windows 10 creators edition on SSD.(3) Use external item to connect old HDD via USB.(4)Install all Lenovo software from your support page. (5)Install all other software, aol, quicken, windows office.(6) While win 10 HDD is running, use ALL known backups from your software vendors, ie aol, quicken, office etc.(7)Copy your pics, email, etc from old HDD to new clean SSD.=Going back to win 7, forget it.When you are done, you have a New Slick surfboard. Not a muddy swap with snakes, etc. =Your T450s is Officially supported win 10 Lenovo.You took the shortcut. Granny Lenovo did give directions. https://support.lenovo.com/us/en/solutions/ht103616 The above recommends will bypass the shortcut, back to win7, etc.Clean and mean is better than mud.Expense: Your time and a external USB HDD connector item. +$70 SSD(buy on sale).You will get better educated on DISASTER recovery solutions for your machine.=You should also purchase a Seagate external USB-HDD slimeline 1 TB HDD to cover your buns in the rain.http://www.bestbuy.com/site/seagate-backup-plus-slim-1tb-external-usb-3-0-2-0-portable-hard-drive-bl...Buy it on sale. $44. Get the one with Seagate dashboard (actually www.nero.com backup incremental). You can store windows backup System Image here. Create your own folder, dr... Read more

Read other 1 answers
RELEVANCY SCORE 54

After the recent upgrade to windows 10 , I can no longer access HP PowerManager, or HP setup mamager.  The message is 'This app has been blocked for your protection' An administrator has blocked you from using this app...Publisher not trusted.   I am the only user, I am the administrator  I am six secnds away from unistalling Windows 10. Any insight would be appreciated.

A:HP Power Manager & Set Up Manager Blocked Windows 10

I am experiencing the same problem and I cannot get operate the web cam on my HP Touchsmart 310-1110UK PC.  Can HP user support provide a solution?

Read other 3 answers
RELEVANCY SCORE 53.6

Alright so my rig WAS:
 
AMD Phenom II X4 965   3.40 GHz
 
8.00 GB RAM
 
64 - bit Windows 7
 
GeForce 550 TI
 
Rosewill RNX-N300X Wireless LAN PCI Card
 
Everything worked well and it was great. Then I upgraded my 550 TI to a GeForce GTX 750 TI and now I'm getting an error with my Rosewill LAN card that says " This device cannot find enough free resources that it can use. (Code 12)". I've tried Uninstalling and reinstalling both drivers for the 750 TI and the LAN card. I have tried taking them out and putting them back in. If I use them seperately they both work fantasticly, its just together that they don't. Neither of them are broken, and I'm truly stumped at what to do. I was thinking it might be a windows thing which is why I posted this in Windows 7 and not in networking or hardware. I was even thinking it might have something to do with the BIOS but I really don't want to entertain that thought unless its either the last option or makes the most sense because I don't like messing with the BIOS. I appreciate any and all help that anyone can offer. Thanks in advance. I ran the MiniToolKit so here are the results :
MiniToolBox by Farbar  Version: 21-07-2014
Ran by GC (administrator) on 14-11-2014 at 14:30:24
Running from "B:\Program Files\Mini Tool Box"
Microsoft Windows 7 Ultimate   (X64)
Boot Mode: Normal
***************************************************************************
========================= Flush DNS: ... Read more

A:Windows Resource Error Help

The first this I noticed is that you only have 2.21GB or free space on your C: drive.  You should have at least 15% free space on a computer of this size, you have just over 7%.  
 
What is the make and model of the PSU?
 
 
Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.

Read other 1 answers
RELEVANCY SCORE 53.2

After a power outage my computer died. I replaced the power supply, after which I got the infamous "Error Loading OS" message. My HP computer did not come with disks (the OS is supplied in a separate partition), so I borrowed a copy of XP Pro and with the CD inserted (but NOT booting from the CD), the machine boots properly. All my programs, data, etc. are there and I can see the whole drive using Windows Explorer.

Next I tried booting off the CD and running recovery. This process requires the Administrator password which we don't have. So, I rebooted as above, logged in as another user with Admin rights, changed the password for Administrator, and tried again. No luck. It still says I have the wrong password.

I'd really like to avoid reloading the OS from the boot partition (even if that's possible). Any ideas on how I can get the Recovery process started?

A:Error Loading Os In Xp After Power Surge

You could try doing a repair install.How to Perform a Windows XP Repair Install

Read other 1 answers
RELEVANCY SCORE 52.8

TSG Utility Log:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 2045 Mb
Graphics Card: Intel(R) 82865G Graphics Controller, 256 Mb
Hard Drives: C: Total - 305234 MB, Free - 253310 MB; D: Total - 4117 MB, Free - 3515 MB;
Motherboard: Dell Computer Corp., 0N6381
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated: Yes, On-Demand Scanner: Disabled

I was preparing to install a new version of Ad-Aware and used the Uninstaller that came with the old version. At the end of the uninstaller, I was prompted to re-start the computer. Two things happened. First, the bootup sequence stopped with just my "wallpaper" graphic displayed on the screen (no Desktop nor System Tray). I recovered by using Ctrl-Alt-Delete to bring up the Task Mgr and closed Windows. Then, via Clean Boot, I ran System Restore to bring the system up successfully. (This bootup "failure" has happened before and I need a "fix" for it!)

Secondly, now, with the system restored to a point prior to uninstalling Ad-Aware, I have tried to launch the older version of this program. Both the Desktop Shortcut and the program exe (in All Programs) result in getting only the error msg: Resource Manager Will Not Load" -- Ad-Aware will not launch!

I would appreciate help on either/both problems.
 

A:Resource manager will not load

Try uninstalling Ad-Aware in Safe Mode.

However, the Windows Installer service won't run in Safe Mode.

You'll need to first run SafeMSI in Safe Mode. Then, uninstall Ad-Aware.
 

Read other 3 answers
RELEVANCY SCORE 52.8

Need help!! The Extender Resource Manager goes into the red and tells me to close all extra files when there is only one application that is open. It is real bad when I am playing chess defraging my hard drive and have ran spy ware and AVG VIRUS PROGRAM. Also ran Advance Registry optimizer and windows live onecare registry cleaner but that did not help
When the Extender Resource Manager is in the red zone, the CPU usage is maxed even though only one app is running. Once the Extender Resource manager goes back down, CPU usage goes down with it. I believe this is causing my computer to slow down and ultimately freeze from time-to-time. I believe I have all the latest patches dealing with this but please let me know what is the latest fix or how to remove it.
 

A:Extender Resource Manager

Read other 8 answers
RELEVANCY SCORE 52.8

The task jumped to 365 for a brief moment, around <0.5 seconds was way to fast to screenshot it.

And then to 3,565 for a brief moment ( roughly, 3,5xx anyway).

I had it open for a while, was testing a program before and forgot to close it from the second screen. I noticed this happen twice and not since.

CPU: Core2Duo E6600

Anyone heard of this issue ?

A:Resource Manager Bug: CPU Usage

Don't worry about it. You probably saw a program opening or something.

Read other 9 answers
RELEVANCY SCORE 52.8

Hello,I recently upgraded my Windows 10 installation with the anniversary update, and I am encountering the following error: Whenever I open the control panel I get an error message titled Power Manager with the text "an error occurred while loading resource DLL" Any help would be appreciatedRegards,bostjanv

Read other answers
RELEVANCY SCORE 52.4

help please,
i have tried both method, but all i got was this error message
Windows Resource Protection could not perform the requested operation.

A:SFC error - Windows Resource Protection could not perform...

Time to start thinking about a repair install or resetting to factory

Read other 6 answers
RELEVANCY SCORE 52.4

Hello There,

I just installed Windows 7 build 7100 the other day.

I am getting an error on my computer once or twice a day where the system completely slows down and then reports "Insufficient Resources to complete requested service". This message pops up when trying to do anything, task manager, documents, my computer, even shutdown. I have to hit the reset button.

Second problem - I thought downloading the most recent windows updates might solve the issue, but everytime I try to run Update, it says "Windows could not search for new updates, code 8024402F. When looking up that code it indicates that the update service may be overloaded, but I have tried at 9 different times of the day so far.......

Any solutions?

Thanks
Zach

A:Resource Error and Windows Update Failure

Kindly fill out your system specs, found in your profile. It's much easier for us to help if we know what you're working with.

Read other 9 answers
RELEVANCY SCORE 52

Hi
My desktop PC is AMD Athlon X4 630 Quad Core Processor AM3 (2.8GHz)
ASUS M4A78-VM with integrated HDMI/DVI/VGA Graphics -MATX
4GB 800MHz Dual Channel DDR2 SDRAM - (2x2GB)
500GB Serial ATA Hard Drive with 16MB Buffer.
512MB ATI Radeon DH4350 (Direct x10.1, PCI Express 2.0)
256 MB ATI Radeon HD3200 Graphics - Hybrid CrossFireX
22" Iiyama full HD Monitor + a Dell 17" (extra monitor)
7.1 HD onboard sound card.
Running W7 64b premier.

On checking my event log after some slow response, I noticed that I am getting :
Desktop Window Manager is experiencing heavy resource contention.
Reason : Graphics subsystem resources are over utilised.

I am using Windows recommended settings. Mozilla on the main screen and outlook express on the slave screen.
Ran the usual clear temp files and ran malwarebyes and superantispyware scans.
I am not playing any games or music, just browsing one website (secure) and outlook express, why am I getting resource contention on the Desktop Window Manager ? Any help appreciated.
Thanks Terryl.
 

A:Desktop Window Manager resource

You list two video outputs. You put one monitor on each output? Is one a video card and the other onboard video? Usually when you add a video card the onboard video is automatically turned off in the bios. Besides that the Radeon DH4350 should be able to have two monitors connected and not need to use the other one. If above is true, you can turn off the onboard video by going into the bios. Plug both monitors into the video card only.
 

Read other 2 answers
RELEVANCY SCORE 52

Hi dears, I just install Lenovo Setting, but after this I have two icons for show the status battery. But the old one isn't working now, only show me the status next to clock.Power Manager How to can I remove or unable this aplication? Tks for your help   

Read other answers
RELEVANCY SCORE 52

I just tried to watch a movie on Netflix, and it prompted me to upgrade Microsoft Silverlight. I saved the file to my desktop, and when I tried to open the .exe file, I got this error message from Windows Installer:

The feature you are trying to use is on a network resource that is unavailable.

I tried moving the downloaded file to a different location, but it had no effect. I apparently can't play any movie now from Netflix, since I have to update Silverlight before I can play anything.

Can someone help?
 

A:Solved: Windows Installer - Resource Unavailable error

Read other 7 answers
RELEVANCY SCORE 52

Hello Guys / Girls

Looking for some help followed a few tips and links from other similar posts but nothing works.

I have tried sfc/SCANNOW both online and offline get same error. Relevant services running to support sfc

I have attached the log link HERE i can see no errors (but i am no expert).

Really would like some help please and i do not want to Refresh/Reinstall if possible.

Also my System Restores were corrupted managed to do one offline said it failed.But after reboot said it worked but still getting sfc error

Microsoft Windows [Version 6.3.9600](c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>sfc /SCANNNOW
Microsoft (R) Windows (R) Resource Checker Version 6.0
Copyright (C) Microsoft Corporation. All rights reserved.
Scans the integrity of all protected system files and replaces incorrect version
s with
correct Microsoft versions.
SFC [/SCANNOW] [/VERIFYONLY] [/SCANFILE=<file>] [/VERIFYFILE=<file>]
[/OFFWINDIR=<offline windows directory> /OFFBOOTDIR=<offline boot directory>
]
/SCANNOW Scans integrity of all protected system files and repairs files
with
problems when possible.
/VERIFYONLY Scans integrity of all protected system files. No repair operati
on is
performed.
/SCANFILE Scans integrity of the referenced file, repairs file if problems
are
identified. Specify full path <file>
/VERIFYFILE Verifies the integrity o... Read more

A:Error even offline scan gives Windows Resource Protection

After running sfc /scannow run:

Dism /Online /Cleanup-Image /RestoreHealth

& reboot & run sfc again.

That should fix things.

I added a link to a tutorial if you need one.

DISM - Fixing Component Store Corruption in Windows 8

Read other 8 answers
RELEVANCY SCORE 51.6

Hi,

I am using avast anti-virus and all seems well in the desktop, there is no warning in the action centre to get anti-virus software, but when I run a system diagnostic report in Performance monitor it says

"The Security centre has not recorded an antivirus product"

It then says if there is one running to stop the security centre from monitoring antivirus status. Thats fine, but why do i get a different status. Avast is def working ok too.

A:Resource and performance manager not recognising avast

  
Quote: Originally Posted by AlHo


Hi,

I am using avast anti-virus and all seems well in the desktop, there is no warning in the action centre to get anti-virus software, but when I run a system diagnostic report in Performance monitor it says

"The Security centre has not recorded an antivirus product"

It then says if there is one running to stop the security centre from monitoring antivirus status. Thats fine, but why do i get a different status. Avast is def working ok too.


Hi Alho,

This issue was covered before, basically Avast have not created all the required WMI properties (root\SecurityCenter\AntiVirusProduct) used by the Security Center/diagnostic report, I did create a tool capable of adding the missing entries but Microsoft deprecated the AntiVirusProduct class Security Center used (No AV installed for Vista (perfmon.exe bug!) - Vista Forums)

You'll have to ask Avast to provide instructions on re-registering their product with the Security Center for showing with diagnostics reports unfortunately.

Steven

Read other 2 answers
RELEVANCY SCORE 51.6

The task manager shows CPU usage at 86%, but the resource monitor shows it fluctuating between 3 and 8 percent with maximum frequency at 46%. Which is right and if maximum frequency is the speed of the chip, such as 2.0 Ghz, why isn't it always 100%?

A:Task manager/ resource monitor CPU usage

What CPU and motherboard do you have? I ask because some have built in throttling - lowers CPU speed when speed isn't needed.

Regards,
GEWB

Read other 6 answers
RELEVANCY SCORE 51.6

What do the displays opened in the Task Manager mean (e.g. use of hard disk):
http://i.imgur.com/pM3RnY7.png
http://i.imgur.com/iY2kjh7.png

Read other answers
RELEVANCY SCORE 51.6

When I was inputting my battery charge thresholds, I noticed that the word normally was missing the letter 'a' when I clicked on the dot next to where it shows the condition of the battery. I was surprised that Dell would let something like a spelling error make it to a public version. I am running an up to date v1.0.4 of Power Manager Lite. Does anyone know how to submit there types of errors to Dell? Or more specifically, a proper email to get it to the right department? Thanks in advance.

A:Dell Power Manager Lite Spelling Error

I notified the software team. They said that it will not be corrected until the next revision.

Read other 1 answers
RELEVANCY SCORE 51.6

Problems started after an window 10 update after shutting down desktop. Window cannot start it will keep on loading windows and eventually will end up showing HP Recovery manager. It got held up here as windows was not properly laoaded the cursor or the mouse cannot even move. Tried start up using F function keys like F8 safe mode it does not work. Check BIOS booting sequence but  appear no problem as it was set at hardisk sat0. Also tried set tp default configuration but also never helps. I did not carried out a CD recovery backup as my CD drive is not functioning efficiently. What alternatives can I have, please provide me some advice or suggestions.     

Read other answers
RELEVANCY SCORE 51.6

Hi, I was having an idiot moment while trying to get my laptop to open the bios setup by hitting f2. I tried other function keys without the result I wanted. I hit f10 which brought me to the "edit boot options" and erased what it said there and simply typed setup thinking that might so what I wanted. To my surprise, it did not. Instead windows boot manager now will only load windows setup to restore my machine to factory settings which I DO NOT want to do. I have tried booting in safe mode but it is trying to load in safe mode for windows setup. I tried the boot manager and that says windows setup as the operating system [EMS Enabled] I have tried other combinations and other advice from other forums with no success. It won't load anything except windows setup. I need the stuff on my hard drive and cannot loose it. I probably deserve it for being a knoob at this point. Anyone knows what I can type in the edit boot options screen to get it to load windows normally or get the boot manager to load windows and not windows setup?

A:Boot manager only loading windows setup

Can you boot to safe mode, or anything? I want you to open command prompt from whatever mode you can.
Do you have a win7 installation DVD or system repair disc?

If not do you have another win7 64bits machine? you can make a system repair disc on that machine System Repair Disc - Create and boot form that DVD on sick machine.

Read other 9 answers
RELEVANCY SCORE 51.6

Alright,

I have an inquiry about the Windows 8 tskmgr loading time. Whenever I press CTRL+SHIFT+ESC, it takes AGES to pop up.Usually between 10 and 20 seconds. This happens after every boot and is very frustrating. What is the cause of this and is there a solution?

Thanks

A:Windows 8 Task Manager loading time

Originally Posted by toerk


What is the cause of this?



Out of a few things, most likely antivirus.

Read other 13 answers
RELEVANCY SCORE 51.2

Specs:
Win7 home prem
64 bit

Running sfc /scannow as administrator. scannow stops at 64% EVERY time.
I've run chkdsk. . no errors. Have not run in safe mode. Never had to before.
First received:
err msg from "window command processor"
Then received err msg "Windows resource protection could not perform the requested operation." Received this 3 times in a row.

I have run scannow successfully in the past without issue. This is a first.

I welcome any ideas on a fix.

A:sfc scannow error "windows resource protection could not perform . . .

Hello eradicus and welcome to Seven Forums.

What prompted you to run System File Checker? Were you having specific problems?

See if this Microsoft forum thread helps.

Error message "Windows Resource Protection could not perform the - Microsoft Answers

If still having issues you might consider using System Restore to go back to a date/time sdprior to your original issues.

System Restore

And if you'd rather not wait for assistance in figuring out the cbs.log info you could opt for a repair install.

Repair Install

Read other 3 answers
RELEVANCY SCORE 51.2

Good day to all


I was wondering if this is normal any help would be great.. thanx in advance

A:Is This A Normal Amount of running programs in the resource manager

I can't see the total number.
Some are essential services some are applications you must have chosen.

I tend to scrutinize auto startup programs (see by typing "msconfig.exe"). If they are applications which you only need to run when you need them then I untick the startup box. I'd stick to applications you have personally installed and know you don't need at startup. Some will be essential.

Read other 3 answers
RELEVANCY SCORE 51.2

When I use Task Manager > Performance > Resource Monitor, the dialog consists only of a static "screenshot" of the Task Manager window. The screenshot is the part of the TM window that would normally be hidden behind the Resource Monitor dialog. The screenshot is the same size as the RM dialog.

In Control Panel > Display, I currently "Medium - 125%".

If I alter the setting to "Smaller - 100% (default)", the RM works as expected.

If I change the Display setting back to 125%, the RM shows only the "screenshot".

I would be grateful for any advice.

Read other answers
RELEVANCY SCORE 51.2

For a while now, my computer has been shutting down unexpectedly, whenever I run something that might use up a lot of my CPU and Memory. The computer doesn't really get that hot, so I don't think it's an overheat problem (but I'm not sure).

Anyhoo, I ran the AVG PC TuneUp, and it's reporting that a device isn't working properly. It's saying "Windows reports that the "Power Control [2011/02/17 11:59:38]" device is not working properly" in Device Manager. Opening Device Manager, I found what it was talking about under "Non-Plug & Play Drivers", and sure enough, it has a yellow "!" next to it.

Clicking on it brings up a new window, and the device status says "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)". It won't even give me an option to update the driver, and when I try to start it up, it just brings up an error message saying...

"The system encountered the following error while attempting to start the service
The System cannot find the specific path."

I just recently bought a new battery because the old one was going bad, but regardless if I keep it in or remove it, the error message stays. I don't believe there's anything wrong with the power cord either.

Anyone know what might be causing this? Could fixing this possibly solve my random instant-shut down problems? Anyone have any solutions?
... Read more

Read other answers
RELEVANCY SCORE 50.8

I need help asap i tryed to restart my whole computer to erase all viruses and everything on it but when i did it took me to system recovery option and when i click on recovery manager the error is 0x400110020000 100c and icant and i try startup repair when its done i press finish and restart but its takes me to windows loading files and takes me back to the same blue page with the system recovery option i tried everything but it just sends me backPLEASE I NEED HELP IM SCARED i need the computer thanks

Read other answers
RELEVANCY SCORE 50.8

Hello, I'm at a loss and afraid I've lost all my files.   Every time I restarted my computer I kept getting the Windows Boot Manager error message: Status: 0xc000000f Info: An error occured while attempting to read the boot configuration data. However, after googling and trying numerous methods to repair this, I now keep getting prompted with the Windows Recovery Manager.  I assumed that choosing the default factory restore option would prompt me with a back up option, but it didn't and proceeded to reformat.  I quickly shut my computer down. I don't know what to do next because now all I get is the Windows Recovery Manager option. Any help would be much appreciated!

A:Windows Boot Manager Error / Windows Recovery Manager Issue

If this string of events actually did start to reformat the drive, it might still be recoverable.  I would boot the computer to an independent OS IE: Linux Live on a CD or DVD and then look at the drive.  Then use that to copy your data to another drive.  Once the data is saved, then do whatever you want with this corrupted drive.  Do not try to continue with any other operations until the data is saved elsewhere.Since this PC came with Vista, once the data is saved, you could try the HP REcovery Manager to restore the original OS. Or just start over this a new install of windows 7

Read other 9 answers
RELEVANCY SCORE 50.8

Hey everyone,

I have been experiencing a slow laptop recently. My laptop would freeze and then crash and sometimes I received the BSOD.

I ran tests to see for viruses and none were located. I also ran a CHKDSK and there was many files that were replaced.

But upon running a SFC /SCANNOW, the Windows Resource Protection found corrupt files but was unable to fix them.

From reading various threads on this, I used tom982's advice and have attached the error log in a zip file.

Can anyone offer any assistance? After running the CHKDSK, my laptop has been running fine and I have not encountered any lags or my laptop freezing up again. Appreciate it!

A:SFC Scannow Error: Windows Resource Protection found corrupt files

Can anyone assist? Much needed help!

Read other 9 answers
RELEVANCY SCORE 50.8

I saw another thread with this title however I am starting a new one because my issue is a tad bit different.

I am trying to run the ?sfc /scannow /OFFBOOTDIR=f:\ /OFFWINDIR=f:\Windows\? (obviously without the quotes) and getting an error - Windows resource protection could not perform the requested operation.

my situation is rather unique though - I am using a PE disc to run this after using another application that allows me to unlock the enterprise encryption that is on the actual hard drive - the reason being is that the machine is booting to the E drive (the recovery partition) and not the windows partition which is the C drive - but technically the F drive in the PE explorer window.

I am currently working with the encryption vendor but thought I'd reach out and see if anyone had any suggestions while I wait and wait and wait and wait!

A:SFC error: "Windows Resource Protection could not perform the requested operation

Hi, not entirely sure what you are up to, if you are running a sfc offline then you are most likely accessing the windows RE (repair your computer) option from a command prompt.

At the x sources prompt first type (in red)

bcdedit | find "osdevice" (exactly as shown here)

Press enter, whatever drive letter is returned use in your sfc offline cmd, you first have to change to that directory (assume f:) at the x sources type:-

F: (press enter) at the F: prompt type your sfc cmd.

If this still gives an error at the f: prompt type:- (in red)

fsutil resource setautoreset true %systemdrive%\

Press enter, you should receive a success message, try the sfc cmd now.

Read other 10 answers
RELEVANCY SCORE 50.4

Hi!

For a few days my now PC has used insane amounts of RAM and I haven't got a clue what's causing at as it's not all listen in Task Manager or Resource Monitor.

As the screenshot below shows: I have 16GB of RAM installed, the processes (when counting "Commit" section values) used up around ~2,5-3GB in total, but yet the RAM usage is at ~11,9GB.

I know ofcourse that the OS in itself generally takes up ~2-3GB, but even then I'm looking at ~6GB of used RAM without any clue what's eating it up.

I have ofcourse rebooted the PC several times. Right after the reboot everything seems fine, but slowly the RAM usage runs up.

As a matter of fact while uploading that screenshot and typing this my total RAM usage has risen to ~12,8GB.

Any ideas?

A:Insane RAM usage which isn't listed in Task Manager/Resource Monitor

Post a screenshot of Task Manager - Performance tab. This contains important information not found anywhere else.
The "commit" of a process has no relationship to the memory usage of a process.

Read other 6 answers
RELEVANCY SCORE 50.4

On our prior T540-T560 thinkpads we were able to use SCCM with PXE and load Windows 10 images to our new laptops. With the new T570's it gets to the System Center Configuration Manager screen, freezes for a minute or two and then restarts....this is right before we'd USUALLY put in a password, Choose what image to load and it starts the imaging process.  We've added the Lenovo T570 drivers to the image. We're using the Secure Boot and Security Chip options in the BIOS   - just like w/the previous models.Any ideas?Thanks for your help.

Read other answers
RELEVANCY SCORE 50

I had noticed my PC's performance slowing considerably over the past 2 days and it even got to the point where it was taking task manager 10 minutes to load if at all. I tried a number of fixes such as disabling superfetch & windows search, fixing
my RAM, updating Windows 8.1, keeping it turned off for 18hours although none of those worked - I did think maybe if I created another account it would have helped, which it did for an hour til the Disk Usage went haywire again. I wouldn't have to load a single
program for it to be 100% and I am in a desperate need of help.

Read other answers
RELEVANCY SCORE 50

Please can anyone from the Lenovo Forum help with this?I received a pop up msg this morning on my Lenovo ThinkCentre:'R6034 Prog C:\Program Files(x86) Lenovo\Power ManagerDPM Host exe'.An application has attempted to load the C runtime library incorrectly. Please contact application support team for more info.I clicked OK, then another pop up msg said,DPM Host exe. - Application error (0xc0000142.I've been unable to get Lenovo support to help and other solutions I've Googledappear to be conflicting.Can anyone enlighten me please as what I can do?Thanks so much.

Read other answers