Over 1 million tech questions and answers.

Random BSOD's at random times often error 0x0000001E

Q: Random BSOD's at random times often error 0x0000001E

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x0000000000000, 0x0000000000000, 0x0000000000000) seems to happen every fifth time or so. I also recognized that after a BSOD the sound is completely disabled until i restart, then everything is fine, except that the windows start up sound is stopping playback after some miliseconds.

The system specifications should be all in my profile. All Windows Updates have been installed and all drivers should be up to date.

Please help me im getting frustrated(got a BSOD while writing this, like if it doesn't want to get help).

Thanks in advance

RELEVANCY SCORE 200
Preferred Solution: Random BSOD's at random times often error 0x0000001E

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Random BSOD's at random times often error 0x0000001E

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.


Code:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: avguard.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus


Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
avnetflt+0x7000
fffff880`069f29d8 fffff880`069f2c88
fffff880`069f29e0 fffff880`069f2c00
fffff880`069f29e8 fffffa80`120aa388
fffff880`069f29f0 fffffa80`1209ba10
fffff880`069f29f8 00000000`00000001
fffff880`069f2a00 fffffa80`120aa350
fffff880`069f2a08 fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download


Code:
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED

Code:
lmvm atikmdag
start end module name
fffff880`11088000 fffff880`11f98000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Thu Apr 17 21:13:16 2014 (53508A3C)
CheckSum: 00EAEEE6
ImageSize: 00F10000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Graphics card. Please download the latest WHQL or and earlier WHQL driver if you have the latest. Then uninstall your current drivers, after that follow this tutorial Drivers - Clean Left over Files after Uninstalling and select ATI Display Drivers only. Then install the new driver you just downloaded, but this time select custom install, only install the things you actually use and need. The only think you actually need is the Display Driver, you do not need CCC. Try that and see if it is any better.

Read other 9 answers
RELEVANCY SCORE 121.2

Hello, first off i want to say thank you for viewing this thread, secondly i believe the error code was 0x0000001e (if not im sorry i uploaded as instructions of everything) I ran Memtest for atleast 10 hours and no errors what so ever. I have had problems with my Desktop ever since i did a driver scanner and then messed up my whole system i believe, i switched my computer cases from the default to a HAF922 coolmaster, upgraded my gtx260 to a gtx 580 with a 1000watt psu, and have had a BSOD randomly since I have done all this and I'm not sure what it is, I've tried everything to figure it out so now im going to ask the experts to please help!!! thank you!!
Windows 7 . - x86 (32-bit) or x64 ? Home premium x64 - the original installed OS on the system? Vista - an OEM or full retail version? OEM - What is the age of system (hardware)? no older then 2-3 years? its an Asus essentio cg5290-bp007 (upgtaded psu(1000watt MUSHKIN) and graphics card(gtx 580)) - What is the age of OS installation (have you re-installed the OS?) No, Just upgraded it when windows 7 came out (was a free upgrade to Win7 from asus for purchasing their Essentio desktop

I just want to thank everyone who will be able to help me because it will mean alot to me!! thank you so much

A:BSOD at random times error 0x0000001e

Arctosa.sys, a driver used by your Razer Arctosa device is the cause, please update this driver
Razer Support

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\drivers\Arctosa.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Arctosa.sys
*** ERROR: Module load completed but symbols could not be loaded for Arctosa.sys
Probably caused by : Arctosa.sys ( Arctosa+11db )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this ad... Read more

Read other 2 answers
RELEVANCY SCORE 120

Hi everyone, recently our desktop computer has started to crash and get the dreaded BSOD. Initially it appeared to be a problem with a driver for one of our phones, which I removed but the problem has resurfaced. Seems to be getting more regular and taking the computer longer to reboot and login now. Attached is the crash dump file as per the posting instructions, along with 2 pictures of the BSODs themselves. Any help on how to fix this would be much appreciated.

A:BSOD at random times, error 0x0000001E and 0x0000001A

Code:
fffff800`049f11e0 fffff880`02e14fb2Unable to load image \SystemRoot\System32\Drivers\N360x64\0502020.003\SYMNETS.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
SYMNETS+0x14fb2
fffff800`049f1640 fffff880`06831190Unable to load image \??\C:\ProgramData\Norton\{0C55C096-0F1D-4F28-AAA2-85EF591126E7}\N360_5.1.0.29\Definitions\IPSDefs\20140502.001\IDSvia64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for IDSvia64.sys
*** ERROR: Module load completed but symbols could not be loaded for IDSvia64.sys
IDSvia64+0x9190
Uninstall any and all Symantec/Norton products completely. Replace with MSE


Code:
fffff800`049f17c8 fffff880`04acad68Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x1dd68

0: kd> lmvm atikmdag
start end module name
fffff880`04aad000 fffff880`050c4000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Fri Jul 03 03:15:07 2009 (4A4CF223)
CheckSum: 005C2509
ImageSize: 00617000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
Name ATI Radeo... Read more

Read other 1 answers
RELEVANCY SCORE 120

Hey guys! I dont know why but i get BSOD with the massage 0x0000001E. Sometimes i dont get it like for 3 days, but sometimes i get it like 3 times in less than 12 hours. Here is a log from dm log collector. Hope u can help me with this one.

A:BSOD in random times with error code 0x0000001E

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSRA\Downloads\Compressed\MARKO-PC-26_05_2015_151631,15\052615-28532-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18839.amd64fre.win7sp1_gdr.150427-0707
Machine Name:
Kernel base = 0xfffff800`02c11000 PsLoadedModuleList = 0xfffff800`02e58730
Debug session time: Tue May 26 19:04:52.096 2015 (UTC + 6:00)
System Uptime: 0 days 0:00:19.751
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

.................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* ... Read more

Read other 1 answers
RELEVANCY SCORE 118.4

My computer has recently taken to blue screening seemingly at random. I recently had a virus that was cleaned up with Spyhunter 4. The system was fine for a few days then blue screened when I was away and restarted throwing the 3b error. Over the past few days the errors have become more and more common. I've checked the computer with whocrashed and got the following results:

On Mon 4/27/2015 7:52:08 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\042715-23150-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x72A10)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Mon 4/27/2015 7:52:08 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0x295B1)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\atikmdag.sys
product: AT... Read more

A:BSOD at random times error 0x0000001e, 0x00000034, and 0x0000003b

Hello and Welcome to SevenForums

Run MemTest86+ for 8 passes. I know that you ran a memory test but MemTest86+ is the most accurate out there. RAM - Test with Memtest86+

Run Driver Verifier for 24 hours. Driver Verifier - Enable and Disable
Your computer may run slow but that's because Driver Verifier is running. If you crash when you start your computer after running Driver Verifier go into Safe Mode and disable it. Safe Mode

Read other 5 answers
RELEVANCY SCORE 100.4

Hey everyone, Im new here on this forum.

I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly.

What happenes is that everything becomes unresponsive; cant alt+tab, cant ctrl+alt+del etc etc. everything freezes randomly... then boom, BSOD. its happened twice, with no apparent pattern.

And then, when it restarts, it tries booting but then it goes into the boot selection screen and my SSD is nowhere to be found. I have to power off then power on again for it to boot up and log in.
- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2012-02-26T23:15:40.693210900Z

EventRecordID 6298

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Jason-PC

- Security

[ UserID] S-1-5-18


+ EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

I've attached my BSOD info along with my Heath report.

if anyone could help please let me know.

Windows 7 Home Premium 64x
System hardware age: from 3 years to a few months.
OS age: just recentl... Read more

A:Random BSOD during Random times, error 0x8000000000000002

No DMPS in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 8 answers
RELEVANCY SCORE 98.8

Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty of air flow. I installed a Cool Mater Hyper Plus 212 heatsink. I followed the instructions, and looked at a few installation videos on my phone just to be sure. I'm pretty positive everything was done correctly including the thermal paste as my system has not gone over 45C while gaming even playing games on Ultra settings.

I got one BSOD late last night, after about 6 hours of it being on but no other problems after that. Today however I have been having BSOD issues the entire time at random times from just 5 minutes up to 2 and a half hours between BSODs. They have ranged from: NTSF_FILE_SYSTEM, PAGE_FAULT_IN_NONPAGED_AREA, KMODE_EXCEPTION_NOT_HANDLED, and SYSTEM_SERVICE_EXCEPTION

I have researched the errors on google all day and tried fixes for each one such as running memory diagnostic tool, deleting the old page info from memory and creating a new one, deleted all of my video drivers and reinstalled them, and I've even opened my case to make sure all my memory and cards are plugged in all the way.

These are the errors that BlueScreenView gave me:

120313-25490-01.dmp 12/3/2013 11:01:36 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff87f`f903edfb 00000000`00000008 ffff... Read more

A:Random BSOD problems in the past 2 days. Random errors at random times

Welcome to the Forum.

Please remove the software:

Code:
Start Menu\Programs\Advanced SystemCare 7 Public:Start Menu\Programs\Advanced SystemCare 7 Public
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer



Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a known cause to BSOD's. Please remove it and use Microsoft Security Essentials it is recommended from a strict BSOD perspective, compatibility... Read more

Read other 9 answers
RELEVANCY SCORE 97.6

For the past few months, my computer has been randomly deciding it doesn't like whatever i'm doing, and having a good ol' fashioned BSOD. It very rarely lets me know what the error is before restarting, so if it's due to any other errors, i don't know what they are - i only got this code from it recrashing while dumping the memory to disk.
I've tried a few basic things to try and sort it out (cleaned the registry, run various mal/spy/whateverware programs, etc), but i'm not that experienced with fixing computers - generally it comes down to a quick google search for the offending error.
The first BSOD's came immediately after my computer spent a month disconnected from the internet, and initially seemed down to Norton Antivirus (it came free, i thought the worst that could happen was that it wouldn't be very effective), due to various errors stopping once it was removed, but it's continued, and i can't work out any connection between the crashes and the programs i'm running at the time - it can crash 5 times in a day, or not have any problems for 2 weeks.
As far as i know, all the drivers are up to date, but again, i'm not that experienced - there may be ones i had no idea even existed.

Also, please, in your answers, treat me like i'm good at following instructions but a little thick. I'll be happy to give you any additional information you need, but don't assume i'll automatically know exactly what you mean, and if possible, link to any programs i might need.

Thanks.

A:Random BSOD's, error 0x0000001e

  
Quote: Originally Posted by NuklearAngel


For the past few months, my computer has been randomly deciding it doesn't like whatever i'm doing, and having a good ol' fashioned BSOD. It very rarely lets me know what the error is before restarting, so if it's due to any other errors, i don't know what they are - i only got this code from it recrashing while dumping the memory to disk.
I've tried a few basic things to try and sort it out (cleaned the registry, run various mal/spy/whateverware programs, etc), but i'm not that experienced with fixing computers - generally it comes down to a quick google search for the offending error.
The first BSOD's came immediately after my computer spent a month disconnected from the internet, and initially seemed down to Norton Antivirus (it came free, i thought the worst that could happen was that it wouldn't be very effective), due to various errors stopping once it was removed, but it's continued, and i can't work out any connection between the crashes and the programs i'm running at the time - it can crash 5 times in a day, or not have any problems for 2 weeks.
As far as i know, all the drivers are up to date, but again, i'm not that experienced - there may be ones i had no idea even existed.

Also, please, in your answers, treat me like i'm good at following instructions but a little thick. I'll be happy to give you any additional information you need, but don't assume i'll automatically know exactly wha... Read more

Read other 3 answers
RELEVANCY SCORE 97.6

Hi guys since I desperate I need the expert's advice if possible...it's been a couple of months that i get BSOD with these reports but i can;t find out the cause. I followed all instructions to get a minidump file even without restarting on error , with no luck, meaning \i get no minidump file.I get the feeling that something is going on with the Volume shadow copy but I 'm not really that advanced to understand.
I attach two of the last reports generated hoping that some of you big guys might find something out, i'd appreciate every effort.
Thank you in advance.

Read other answers
RELEVANCY SCORE 97.6

I have a machine that blue screens. No pattern has been identified except that it only does it when plugged into the port replicator. When the user has it at home, there is never a problem.

You'll notice by the minidumps this problem was happening a couple months ago then started again today. The user has been out of the office that whole time. We did not get a chance to fix it back then.

I spent the day upgrading drivers. There is a video card driver update left to do and it's highly possible that is the one. However, out internet comes to a screeching slow in the afternoon.

I've tried using Microsoft's debugging tools but was not getting very far when I ran across your site.

I've attached the zip as indicated in your instruction set for submitting to the BSOD board. The affected machine is a Windows 7 Professional x64 Sony Viao model number VPCZ212GX.

Thanks for all you guys do! Any help is greatly appreciated.
--
Quintin

A:Random BSOD, error 0x0000001e

Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffff800034621f0, the pool entry being checked.
Arg3: 0000000000000000, the read back flink freelist value (should be the same as 2).
Arg4: fffff800034621f0, the read back blink freelist value (should be the same as 2).

Debugging Details:
------------------
BUGCHECK_STR: 0x19_3

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System
Having a check for any solutions now, bear in mind, I am new to BSOD analysis.

Read other 4 answers
RELEVANCY SCORE 97.6

I was on my comp for about... an hour or 2 and it BSOD'd it happened before but hasn't happened in a while til now i restarted it and its running good but i would like to know why its happening the error code is 0x0000001e i realize this won't fully help you guys so i included a system health report and the DMP report
OS= Windows 7 64 Bit
Installed less than a year ago
Full Retail

A:Random BSOD error 0x0000001e

Lets see where to start.

1-A three year old Lycosa.sys mouse driver. Update to latest.

2-Avast. remove and replace

Avast can be a contributing cause of BSOD'S . Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

If after that you are still having them upload the DMP's

Read other 2 answers
RELEVANCY SCORE 97.6

Hello

Every now and then I'm getting BSOD's with error code 0x0000001e. It will happen about once a day and at any given time. This last time I was just web surfing and had windows explorer opened and paying music with iTunes. I received a windows crash report after reboot with this information on it:

BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6.1.7601
Service Pack: 1.0
Product: 256.1

I'm including my memory dmp. files
Please help

A:It Seems I'm getting a Random BSOD error 0x0000001e

IT looks like your BSOD is being caused by your Intel rapid storage driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys ( iaStorA+63aa8 )

Followup: MachineOwner
---------
Driver Reference Table - iaStorA.sys

As you can see the driver is likely out of date:


Code:
kd> lmvm iaStorA
start end module name
fffff880`012b0000 fffff880`01936000 iaStorA T (no symbols)
Loaded symbol image file: iaStorA.sys
Image path: iaStorA.sys
Image name: iaStorA.sys
Timestamp: Tue Aug 07 11:43:10 2012 (5021378E)
CheckSum: 00090889
ImageSize: 00686000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: https://downloadcenter.intel.com/Default.aspx

Read other 4 answers
RELEVANCY SCORE 97.6

Hey guys i need help, im having random BSOD mozzilla crash also after the BSOD computer reboot my MSE becomes out of date......

using MSE and MBAM

heres my log file from sfc /scannow

A:Random BSOD error 0x0000001e

somehow i cant attach the file wait

Read other 7 answers
RELEVANCY SCORE 97.6

Hello all, I recently tried fixing a family friends computer, I reformatted and everything went fine for about 3 hour and then I started getting the 0x0000001e error at random intervals, I'd have it running on minecraft and nothing then I'd open spotify and it died, I then reset the computer and it did it near immediately and now it's running just fine. ( for about 10 min )
Any solutions?

A:Random BSOD, error 0x0000001e

My Current solution is to follow the instructions: Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 97.6

Hello,

I had just finished playing some Civ5 and a few minutes after, a random BSOD happened.

Just trying to get to the root of the issue, if there is one.

Thanks for any help.

(Used the DM Log Collector. File is attached with this post)

A:Random BSOD, error 0x0000001e

Your nVidia driver has been flagged.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80069674e0, fffff880100060dc, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9a30dc )
Download the latest version (337.88) and follow NVIDIA Drivers - Avoid Problems for the cleanest possible install.

Test and report back.


Code:
3: kd> lmvm nvlddmkm
start end module name
fffff880`0f663000 fffff880`102ac000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Dec 19 17:02:52 2013 (52B326BC)
CheckSum: 00C19112
ImageSize: 00C49000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 1 answers
RELEVANCY SCORE 96.4

This HP laptop is just randomly BSOD when I log in to Windows and when computer is idle. These are the codes I get:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFFA8003D9BB88
BCP3: 0000000000000000
BCP4: 000000007EFA8000

I have reformatted the HD and still have this problem. I want to say it's norton just because I hate norton!
I have attached the zip file.

A:BSOD Random and when loging in. Error 0x0000001E

Welcome to SevenForums.

Your dumps do not give much information, but lets start with uninstalling Norton AV.

Code:
Start Menu\Programs\Norton Internet Security Public:Start Menu\Programs\Norton Internet Security Public
It often contributes in BSOD-s.

Please remove it using its removal tool from here: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials, Free antivirus for windows.
Malwarebytes Anti-Malware Free
Good and Free system security combination




   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Code:
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6233, 310.50 KB (317,952 bytes), 9/28/2011 10:34 AM)
Update your graphic drivers in the following manner:




Quote:
Sometimes drivers remain, not completely uninstalled. Follow this tutorial for complete removal of drivers of the particular program:How to Clean Left Over Driver Files with Driver Sweeper



HP Pavilion g6-1a00 Notebook PC series*-* AMD High-Definition Graphics Driver - HP Business Support Center
Perform a System File Check to check the integrity of all protected Windows 7:Click on the... Read more

Read other 1 answers
RELEVANCY SCORE 96.4

I have been plagued with this BSOD for a while now. I have ran my driver utility and as far as I can find I have the most current version of the BIOS. I ran a system scan that said it found no integrity problems. I will attach the minidump file and pray that the issue is simple and just evades me. This computer is very imprtant to my wife due to the fact that she uses it for school.

Thank You,
Michael
OS: Windows 7 Home
Prossessor: AMD Athlon II

A:Random BSOD with error code 0x0000001E

crud: just had another BSOD. This is getting old. I used to get one for BUGCODE_USB_DRIVER but I think I finally got that one done. This one seems more generic and I am gettingmore frustrated by the day. Please help if at all possible....Thanks again

Read other 3 answers
RELEVANCY SCORE 96.4

Hello, few days ago I bough a new PC(Not build, only parts). A friend of mine helped me to built it up from scratch and everything was perfect. 2 Days ago I was writing a school assignment on word, and suddenly BSOD came, thank god word autosaved my document. Ever since then my pc tends to BSOD randomly and everytime its the same error. I just got one right now writing this post. I'm not very experienced in the whole BSOD thing, I hope someone can help me .
The first file is from the BSOD i got while I was writing this post, the other one is from earlier today. There is only these 2 files at my Windows/minidump section.
My windows is installed on a SSD card, if this helps...

A:Random BSOD's with a new desktop PC, error 0x0000001e

Your Windows installation is counterfeit, you have a Lenovo PID on a Gigabyte retail motherboard.


Code:
Host Name: VYTAS-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Vytas
Registered Organization:
Product ID: 00426-OEM-8992662-00497 ---> Lenovo PID

Original Install Date: 2014-09-30, 04:20:47
System Boot Time: 2014-10-02, 14:30:46
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z97X-Gaming 3
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 60 Stepping 3 GenuineIntel ~3080 Mhz
BIOS Version: American Megatrends Inc. F4, 2014-05-15
Counterfeit installations such as yours can contain heavily modified code that can cause the installation to behave it unexpected ways. Analysing BSODs and determining their causes on these sorts of installations is completely unreliable, and for this reason most analysts won't attempt it.

My recommendation is to install a genuine copy of Windows 7. This will minimise the problems you are experiencing and make subsequent diagnosis of BSODs far more reliab... Read more

Read other 5 answers
RELEVANCY SCORE 96.4

Hello, This is my first BSOD.
Please Help.
I've attached the zip file.
Thank you in advance.

A:Random BSOD on a new computer, Error 0X0000001E.

Hello and welcome Cow

It's hard to say anything with that one dump.

So we'll enable driver verifier to rule out buggy drivers.

Verifier puts extreme stress on the drivers, bad ones will cause BSOD. If we change all those drivers we hope for no more BSODs, If you get no BSODs, then its not a driver and we look to hardware. With verifier on your computer may be a little laggy, but actually..its just doing its work.

Driver Verifier





Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in verifier and press Enter
- Select Create custom settings (for code developers) and click Next
- Select Select individual settings from a full list and click Next
- Select everything EXCEPT FOR Low Resource Simulation and click Next
- Select Select driver names from a list and click Next
Then select all drivers NOT provided by Microsoft and click Next
- Select Finish on the next page.

Reboot the system and wait for it to crash to the Blu... Read more

Read other 5 answers
RELEVANCY SCORE 96.4

Hello there, good evening! I've had quite recently this BSOD related apparently to one of my drivers... Yet I don't know which nor how to find the problem in the minidump, therefore I recur to you guys

Hoping for a solution or aid in finding it! Thanks in advance

P.D. I've attached all the necessary files as requested

A:random BSOD, usually while playing, error 0x0000001e

The cause seems to be from your Intel Rapid Storage Technology.
Please create a restore point before changing drivers as I don't want the risk of making your problems worse.
Please update it from the following website.

https://downloadcenter.intel.com/Det...adType=Drivers


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : storport.sys ( storport!StorPortNotification+22 )

Followup: MachineOwner

Code:
storport!StorPortNotification+0x22:
fffff880`0176e0d2 488b18 mov rbx,qword ptr [rax] ds:38a0:0073da65`0073da65=????????????????
Resetting default scope

Code:
STACK_TEXT:
fffff880`038b08e8 fffff800`0327e5be : 00000000`00000001 fffffa80`1a034000 fffff880`038b1060 fffff800`032b1a90 : nt!KeBugCheck
fffff880`038b08f0 fffff800`032b175d : fffff800`03495380 fffff800`033d2260 fffff800`03211000 fffff880`038b1808 : nt!KiKernelCalloutExceptionHandler+0xe
fffff880`038b0920 ... Read more

Read other 4 answers
RELEVANCY SCORE 96.4

Hey I recently got an ASUS X54H laptop and it has windows 7 ultimate x64. I randomly get the BSOD error 0x0000001a and 0x0000001e and I've tried updating the drivers and still no luck it could be running great for a week or so and then give me the BSOD. I've attached the .zip made from the performance monitor. Any help would be great.

Thanks,
Adrian

A:Random BSOD, error 0x0000001a and 0x0000001e

Security Software:
Code:
avastsvc.exe c:\program files\avast software\avast\avastsvc.exe 1456 8 200 1380 3/28/2012 9:13 AM 6.0.1367.0 43.72 KB (44,768 bytes) 2/15/2012 5:51 PM
avastui.exe c:\program files\avast software\avast\avastui.exe 2536 8 200 1380 3/28/2012 9:14 AM 6.0.1367.0 3.57 MB (3,744,552 bytes) 2/15/2012 5:51 PM


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\aandrade158\Windows_NT6_BSOD_jcgriff2\032812-17534-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16917.amd64fre.win7_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02c16000 PsLoadedModuleList = 0xfffff800`02e52e70
Debug session time: Tue Mar 27 22:57:31.892 2012 (UTC - 6:00)
System Uptime: 0 days 0:15:50.218
Loading Kernel Symbols
...............................................................
................................................................
...................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 96.4

Just started getting the BSOD on a 1 year old Dell laptop. It is completely random only happening occasionally. If the startup is successful I can use the pc for as long as I want with no problems. I ran a hard disk check that came back with no issues so I'm wondering if it is a driver or software issue. Occasionally the top of the BSOD states, "IRQL not less or equal" also.

I have attached the requested zip files that I created as per the forum instructions. If anything else is needed please let me know. Thanks in advance.

A:Random BSOD on startup, error 0x0000001e

Welcome aboard.

It is caused by the storage driver.

Code:
fffff880`03237218 fffff880`0127434eUnable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x5034e
lmvm iastor
start end module name
fffff880`01224000 fffff880`015c6000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
Image name: iaStor.sys
Timestamp: Fri May 20 22:22:24 2011 (4DD69C48)
CheckSum: 0008CA08
ImageSize: 003A2000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Get it from http://downloadcenter.intel.com/Sear...ntel+RST%29%22.

Read other 2 answers
RELEVANCY SCORE 96.4

Hi guys,

I am having some problems with my notebook, I hope someone could try to understand what is wrong with it!

I've had my Asus Zenbook for almost 4 years and couldn't be happier, but over the last couple of months I've been experiencing unusual slow downs, random freeze of the computer (especially when browsing Chrome for a couple of hours) that I can only solve by turning the notebook off via power button, and, more recently, BSOD.

Sometimes I get an error message "Windows has encountered a critical problem and will restart automatically in one minute. Please save your work now." BSOD are not always the same, but most of the time they refer to 0x000001E o 0x000001A, with messages like "0x000000BE an attempt was made to write to read-only memory" or relative to "Memory dump" problems.

These problems disapper in Safe Mode.

I am really not good with computers but I have tried to research as much as possible. Tell me if some more info is needed. I've asked around and they suggested to check the integrity of RAM, SSD, CPU, Motherboard (see below), nw I am thinking there might be some faulty driver, but I cannot figure out what to try at this point.

I am attaching a MiniDump file of the latest BSOD.

Thank you very much for your help.

____
Troubleshooting attempts so far:

- Antivirus scan with different softwares (Windows Defender, Avast, Malwarebytes): nothing found;
- System recovery with new install of OS: nothing... Read more

Read other answers
RELEVANCY SCORE 96.4

Hi guys,

I am having some problems with my notebook, I hope someone could try to understand what is wrong with it!

I've had my Asus Zenbook for almost 4 years and couldn't be happier, but over the last couple of months I've been experiencing unusual slow downs, random freeze of the computer (especially when browsing Chrome for a couple of hours) that I can only solve by turning the notebook off via power button, and, more recently, BSOD.

Sometimes I get an error message "Windows has encountered a critical problem and will restart automatically in one minute. Please save your work now." BSOD are not always the same, but most of the time they refer to 0x000001E o 0x000001A, with messages like "0x000000BE an attempt was made to write to read-only memory" or relative to "Memory dump" problems.

These problems disapper in Safe Mode.

I am really not good with computers but I have tried to research as much as possible. Tell me if some more info is needed. I've asked around and they suggested to check the integrity of RAM, SSD, CPU, Motherboard (see below), nw I am thinking there might be some faulty driver, but I cannot figure out what to try at this point.

I am attaching a MiniDump file of the latest BSOD.

Thank you very much for your help.

____
Troubleshooting attempts so far:

- Antivirus scan with different softwares (Windows Defender, Avast, Malwarebytes): nothing found;
- System recovery with new install of OS: nothing... Read more

A:BSOD and random freeze, error 0x0000001e

Hi Dario,
from the event log
La struttura del file system nel disco ? danneggiata e inutilizzabile. Eseguire l'utilit? chkdsk nel volume OS.

please run
Chkdsk /r
then sfc /scannow.

Are you using Virtualbox, this was reported as having insufficient memory resources

you also had this
Popup dell'applicazione: Windows - File danneggiato : Exception Processing Message 0xc0000102 Parameters 0x000007FEFCBF819C 0x000007FEFCBF819C 0x000007FEFCBF819C 0x000007FEFCBF819C
Roy

Read other 1 answers
RELEVANCY SCORE 96.4

I've been constantly getting BSOD at random times ever since I updated to Windows 10. It usually happens when I am playing a game, but can also randomly happen when I'm just browsing on the internet.

BRIAN-PC-Tue_11_01_2016_144757_85.zip

Read other answers
RELEVANCY SCORE 96

I am typing this original post from my cellphone because that is where I wrote the blue screen error finally once it started happening frequently, just today so please do forgive me if I am missing anything but I'll come back on my Desktop and try to finish anything needed in the post once I submit it from my phone.

Here is the error message:
STOP:
0x0000001E (0XFFFFFFFFC0000005, 0XFFFFF80003281DC2, 0X0000000000000000, 0X000000000000020)

I will let you know right off the bat that I am definitely not a techie so this is all very confusing to me. Please any help would be extremely appreciated!! Thanks again I'm advance!

Now before I came here to post, I did do a few hours of research and eventually took the following steps.

1. I have reinstalled my Nvidia Graphics Driver.
2. I have deleted, uninstalled, cleaned up a great deal of space on my desktop.
3. I have used Safe Mode to enter my Device Manager where I looked at my Network Adapters and made sure that all of them were up to date, this was easy because I only had 3 network adapters. The first two were both up to date. The third one is "Microsoft Virtual Wifi Miniport Adapter" which wouldn't allow me to update because it said it was not from a "trusted source" and windows didn't want to authorize. For this reason I just right-click and Disabled it.
4. I have run SFC /scannow from cmd as Administrator. The results:
"Windows Resource Protection did not find any integrity violations... Read more

A:BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

Hello oksm08, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 1 answers
RELEVANCY SCORE 95.2

I need help solving this BSOD problem. I have installed recent drivers and I thought everything was resolved but has failed unfortunately.

I have....
Windows 7 64-Bit
Full Retain Version
My hardware is about 3 years old besides my HDD that I recently purchased a week ago
And I have reinstalled the os

Intel Quad Core @ 2.33 GHZ
4GB Ram
NVIDIA 450 GTX

Thank you in advance.

A:Random BSOD during games and installations, error 0x0000001E

  
Quote: Originally Posted by Thecomposer132


I need help solving this BSOD problem. I have installed recent drivers and I thought everything was resolved but has failed unfortunately.

I have....
Windows 7 64-Bit
Full Retain Version
My hardware is about 3 years old besides my HDD that I recently purchased a week ago
And I have reinstalled the os

Intel Quad Core @ 2.33 GHZ
4GB Ram
NVIDIA 450 GTX

Thank you in advance.



First two things that jump out
Asacpi.sys

The pre 2009 version of this driver is a known bsod cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (notbefore).



Old drivers

Code:
ASACPI.sys 3/27/2005 9:30:36 PM fffff880`04486000 fffff880`0448e000 0x00008000 0x42476c4c
Lycosa.sys 1/18/2008 3:51:42 AM fffff880`05a2a000 fffff880`05a2e980 0x00004980 0x4790689e
fsvista.sys 3/18/2008 1:37:07 AM fffff880`02dc0000 fffff880`02dc... Read more

Read other 2 answers
RELEVANCY SCORE 95.2

Hi Everyone,
I'm getting a BSOD daily, not a clue why. I've trouble shot as must as could, I have yet to solve my problem.
Please some one assist me on this issue. the zip is uploaded.

A:BSOD while on Netflix and random Moments Every day, error 0x0000001e

Hi and welcome to the forum.
Probably caused by : kltdi.sys ( kltdi+71af ) Kaspersky Network filtering component.

The cause of your BSOD's is your Kaspersky Antivirus. Remove Kaspersky and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

BSOD BUGCHECK SUMMARY

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Yusra\Downloads\Compressed\ApuyDario\SF_... Read more

Read other 1 answers
RELEVANCY SCORE 95.2

Hey guys, I've been fighting with an issue my computer's been having pretty much ever since I built it, with everything from bad ram to outdated drivers, I've pretty much seen it all. I don't use my computer every day, but I will usually see a blue screen when I do.
What's most confusing to me is that when I play graphically intense games like Crysis or Battlefield, my computer performs fine, but while watching videos or playing League of Legends, I'll often get a blue screen.
Anyway, the error that I most often see nowadays is 0x0000001e followed by four phrases of 0x0000000000000000... I've received blue screens with the error codes of something like DRIVER_IRQL_NOT_LESS_OR_EQUAL, but updating my drivers seems to have fixed that one.
I'm gonna upload the DM Log file as requested by the guidelines, but I do have pictures too, if they're helpful.
Any help is appreciated guys, thanks!

A:Random BSOD when playing games, error 0x0000001e

hello, marmiteistasty. I will try to help you with your issues. I see you have filled out your System Specs, could ZI get you to add a few more details please. I would like to know Manufacturer and brand of all components. Sometimes it is necessary for us to look up components, so the details are important, like what CPU cooler and PSU do you have.

When you installed Windows did you use the driver installation disk or did you download them from the Motherboard Manufacturer's Web sit (Motherboards - MAXIMUS VI HERO - ASUS}? The web site is always more current than the driver disk.

You only had one dump file in the files you uploaded. Would you please ensure your computer is configured for Small Memory Dumps Dump Files - Configure Windows to Create on BSOD
The dump files list 2 issues.

Code:
dtsoftbus01
start end module name
fffff880`0497f000 fffff880`049c7000 dtsoftbus01 T (no symbols)
Loaded symbol image file: dtsoftbus01.sys
Image path: \SystemRoot\system32\DRIVERS\dtsoftbus01.sys
Image name: dtsoftbus01.sys
Timestamp: Thu Jun 20 02:22:51 2013 (51C2ADCB)
CheckSum: 00050AD5
ImageSize: 00048000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is Daemon Tools driver. Dameon Tools is a well known BSOD causer in Windows as well as Alcohol 120 and other SPD pass-through programs Please uninstall any of these programs
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause of BSOD's.

1. Uninstall ... Read more

Read other 1 answers
RELEVANCY SCORE 95.2

Hi!

Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes.

I reinstalled my OS after changing the hardware, and since then I've been having these BSOD.

The BSOD refers the cause to a driver named ntoskrnl.exe.
I've included the DMP files and a system health report on this message.

You can find my system spec on my profile.

Thank you for your help guys!

A:Random BSOD, error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe

  
Quote: Originally Posted by riotpowder


Hi!

Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes.

I reinstalled my OS after changing the hardware, and since then I've been having these BSOD.

The BSOD refers the cause to a driver named ntoskrnl.exe.
I've included the DMP files and a system health report on this message.

You can find my system spec on my profile.

Thank you for your help guys!


These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair di... Read more

Read other 2 answers
RELEVANCY SCORE 95.2

Thanks in advance for any one that helps.

I have recently built a new gaming rig and I have BSOD at random moments. The OS is installed on a SSD (mushkin chromos 480gb), asus P9X79 pro, 16 gb muskin memory, GeForce titan, ASUS xonar essence STX for audio, i7 38020 @ 3.6 ghz.
My computer will idle, and get a BSOD. I would then restart in normal mode, and it would run perfectly for the next 3 hours(or for however long I'm using it for)
Other times it would crash during a game (mostly BF3), I'd do the same thing and restart in normal, and it would run again normally for the remainder of the time I use it.
The last error code I got was during game play.
I copied and pasted this from BSOD viewer.

051813-10483-01.dmp 5/18/2013 9:16:42 PM KMODE_EXCEPTION_NOT_HANDLED 0x0000001e ffffffff`c0000005 fffffa80`0010000f 00000000`00000001 00000000`c0000005 ntoskrnl.exe ntoskrnl.exe+75c00 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318-1533) x64 ntoskrnl.exe+75c00 C:\Windows\Minidump\051813-10483-01.dmp 8 15 7601 304,256

If there is another way to pass the info on my dump file, please advise.

A:BSOD at Random Moments,OS installed on SSD -error 0x0000001e

Hi ApuyDario and welcome to SevenForums

Take a look at the link below to see how to upload the dmp files and other needed files

Blue Screen of Death (BSOD) Posting Instructions

Read other 2 answers
RELEVANCY SCORE 95.2

Please see attached SF DEBUG files.

Computer crashes every now and then (daily) with BSOD error 0x0000001A or 0x0000001E. Upon restart, it says BIOS has encountered an unsuccessful post attempt. Needs to be hard reset several times just to start up normally from then on.

Please help. Thanks.

A:Random BSOD in Desktop, error 0x0000001A or 0x0000001E

Hi RobbyButterball.

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

Read other 3 answers
RELEVANCY SCORE 95.2

Hello all,

A few days ago my computer began experiencing random BSOD. I wish I knew was precipitated it, but I cannot. It seems random. Sometimes it happens when opening a browser. Other times it crashes on bootup. It gives me the stop error of 0x0000001e and says IRQL_NOT_LESS_OR_EQUAL. It's crashes three times while trying to post this.

Here is the 'grab all' file. Oh please don't crash while attaching it. . .

Thank you in advance.

A:Random BSOD, IRQL_NOT_LESS_OR_EQUAL, stop error 0x0000001e

Welcome to SevenForums

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.


Code:
fffff880`033bd9c8 fffff880`02eba8d1Unable to load image \??\C:\windows\system32\Drivers\SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0xc8d1
Norton Internet Security / SYMEVENT64x86.SYS / Source: Carrona.org

The antivirus you are currently using is known and contributing to your BSOD crashes, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials at least to test.Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Get the latest version/drivers for the Intel Rapid Storage stuff ... Read more

Read other 8 answers
RELEVANCY SCORE 95.2

Hello everyone.

I built a computer about a month ago and ever since the first attempt to install windows it has been giving me blue screens. The computer is working someone fine most of the time now, but still has a daily to twice a day blue screen error. I have done everything that google has said (Memtest, driver updates, HDD diagnostics, BIOS update, check registry, scan for virus, etc.) with no help. If anyone can point me in the right direction it would be greatly appreciative.

Attached are the minidumps and system information. Thank you for your time.

A:Random BSOD's since fresh build. Error 0x0000001e.

Could you update your full system specs in your profile, please?

The last 3 BSODs you had - 2 were 1E errors caused by ntkrnlmp.exe and you had a 3B error caused by fltmgr.sys.

Could you uninstall AVG and install MSE for testing purposes, and also disable/uninstall AppleCharger as this can cause problems (http://www.gigabyte.com/support-downloads/utility.aspx - The On/Off charge utility. Not the one for Intel 7 series).

Try running sfc /scannow, also if your motherboard has a parallel port, then disable it within the BIOS.

Read other 9 answers
RELEVANCY SCORE 94.8

Hi

I'm currently running Windows XP Home Edition with Service Pack 3.

Currently using firefox 3.5.5. On random occasions ,random pages will randomly not load with the loading circle spinning but nothing happening. When I click refresh, the page might load or might not. Sometimes i have to end up closing the browser and that seems to fix the problem for some time. The problem will randomly occur again shortly after.

For Msn, i have version Windows live Messenger 2009. On random occasions, i will not receive or my messages will not be sent out. The problem will go away and come back consistently.

I have shaw high speed internet directly connected to the modem. I tried calling them and letting them take a look into my computer through the internet. When they were searching theought, the problem did not occur at that moment, therefor i couldn't not prove that i have a problem.

I tried scanning my computer with Avira AntiVir Personal- Free version and Malwarebytes' Anit-Malware Free version all uptodate, but nothing gets picked up.

This problem started to occur 2-3 weeks ago, and i could not occur what i did during that time.

Thanks for your time.

A:Unable to access random pages and random times/Msn not receiving or sending msges at random times

o.o

Read other 1 answers
RELEVANCY SCORE 94.4

Hello,

Yesterday I encountered four completely random BSODs.
Two while I was just browsing about the internet,
One literally right after bootup
And another one while I was playing SimCity and watching a stream. The one while playing SimCity popped up saying 'Hardware Malfunction' a a seperate-ish BSOD window before the new one happened.

My specs:
CPU: i5-3570k @ stock clock
GPU: MSI GeForce GTX 780 (reference card)
RAM: 16GB Kingston HyperX Beast @ 2400mhz.
Motherboard: Asus P8Z77-V LX
SSD: Kingston SSDNow v300 120GB
Storage: 2x 1TB HDDs which I cannot remember the brand of.

A bit more info.
My RAM is supposed to run 2400mhz, but I have to set it to that in the BIOS manually or it'll detect and set it to 1333mhz. It seems after changing the RAM clock to the 2400mhz, that's when I encounter most BSODs. This is what I think may be the issue, but I can't understand minidumps for the life of me, so I thought I'd ask for some help to see if I'm correct, and to see if you guys perhaps have any ideas of what to do.


I've uploaded the dump files to SkyDrive. https://skydrive.live.com/redir?resi...LnfC3Ib1WOdphY

On a side note I have some different issues which has nothing to do with BSODs, really, but sometimes all my USB devices will disconnect. I'm pretty sure this is a driver issue with Razer's drivers, as I'm using a Deathadder, Blackwidow Ultimate and the Megalodon headset from them.
Although it may be my external mix (A Samson GO clip mic thingy) be... Read more

A:Random BSOD, error 0x000000fc & 0x0000001e & 0x00000109 & 0x0000003b

Hello and welcome Darkenager mate have almost the same board I set mine in increments (RAM) to so go to say 1600 and then try 1866 it is still a decent speed all the same. Then increase until it baulks again. Mine is set manually after I tried the XMP and the RAM would default back to the 1333 the highest this board is supposed to go is 2133 by my manual.

I am away from home at the moment and on my 8 machine so I cannot tell you exactly see this for some info Ivy Bridge Overclocking Guide ? Asus Motherboards

Read other 3 answers
RELEVANCY SCORE 94.4

Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!

A:Random BSOD's, error 0x0000001e, 0a, caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by zvone07


Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!


8 different causes most pointing to hardware. If you are overclocking stop.

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make s... Read more

Read other 9 answers
RELEVANCY SCORE 94.4

Hello Everyone,

As my first post, I am seeking help with my Windows 7 BSOD crash. I am usually online and Firefox freezes and gives me the light-grey out screen and says (not responding) usually followed by the BSOD with error codes

0x0000001a and or 0x0000001e

Don't know if it is a driver error or memory error. I have recently re-installed Windows 7 and still same problem, also have uninstalled Photoshop and Illustrator, for which I thought might be hogging my RAM.

If you have the time to look over my .dmp files and spot a problem or possible solution I would greatly appreciate it, Thank you in advance!!

A:BSOD Error 0x0000001a/0x0000001e (Not Responding) Random Restarts

Before proceeding:

1. Download and save this tool to your desktop:

http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click 'Copy' - ignore any errors if they appear
3. Use CTRL+V to paste the unedited results of the tool here in your next reply

Read other 2 answers
RELEVANCY SCORE 93.2

Basic System Specs:

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? No, shipped with Vista, upgraded to 7.
- an OEM or full retail version? Full Retail Verison


- What is the age of system (hardware)? Three years, one month, and 11 days old.
- What is the age of OS installation (have you re-installed the OS?) Around one month old.

ZIP folder with PERFMON HTML file and Windows_NT6_BSOD_jcgriff2 folder attached.

OK,

I'm a total noob on this forum, so I tried to follow the instructions on posting.

Firstly, when you read PERFMON, it'll say my HDD is failing. I know that. I know it's stupid to use a failing HDD, but my data is backed up, and I get my Mac on Saturday. Anyways,

Last night, around 1:30 AM, I got up to shut down my computer, it was on, and in the same room as me, and I wanted sleep. So, I went to the start menu, and saw the update icon next to shut down. I shut down the machine instead of sleeping, so it could update. I turn off the monitor to go to sleep. I then hear the fans ramp up, then slow down, and the computer "click" like it does when it shuts off. But, the fans were still running. I turned on a lamp, and sat down. I turned on the monitor, to be facing a big fat BSoD. It didn't give me an exact message of what happened, just a STOP error code. The STOP error code was 0x0000001e, and the BCCode is 1e. I haven't installed any new hardware, and the only software I've installed was Apple's AirPort Utilit... Read more

A:Random BSOD at night, error 0x0000001e, Updates possibly installing.

Failing hard drives can cause BSOD's. But most importantly - they can die without any notice at all. Backup all your stuff immediately!!!

Win7 doesn't like wireless USB devices. You have a Compact Wireless-G USB Network Adapter with SpeedBooster ver.2
Here's my rant about these devices:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


The memory dump points to networking stuff - and your networking drivers (both wired and wireless USB) are from 2008. This means that it's most likely that the wireless USB drivers are causing the error (although the wired drivers are suspect also).

Please update all of your networking drivers. Be sure to use ONLY Win7 compatible drivers.

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we s... Read more

Read other 9 answers
RELEVANCY SCORE 93.2

Hello,

A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD to start up my computer. One time and only one I got the error message (while booting the computer) "BOOTIMGR corrupt, system couldnt boot" or something like that. I restarted my computer after I saw that and it was gone. I've attached two ZIP files of two different .dmp files that were created today with about 15-20 minutes in between them. Is there something wrong with my bios? If not, what could it be?

Thank you for any support, greatly appreciated

A:Random BSOD stop error 0x0000001E, hardware error?

Also maybe worth noting that I had not updated drivers in a while, right after posting this I updated my monitor's drivers. The rest were up to date.

Read other 3 answers
RELEVANCY SCORE 90.4

I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into windows in 8-10 seconds (SSD) but the latest post-BSOD boot took about five minutes from typing my password into the login screen to where my desktop popped up. A subsequent reboot was at normal speed. The memory dumps always include the NT OS kernel, but then also some other driver (different each time), which I suspect just happens to be the one trying to run at the time of the error.

Things I've tested:
Temperatures (didn't really suspect them in the first place, but I'm running cool)
Memory (Both the native Windows test and memtest found no issues)
Hard drives (chkdsk came back clean)

All drivers are up to date, although the uploaded report might show an older version of my sound card driver, as I just reinstalled it at the behest of windows action center (which didn't make the notification go away, mind).

I'm hoping someone wiser than I can make sense of this, because it all seems so random to me. Thanks in advance to whoever that is.

A:BSOD at seemingly random times, memory dump blaming random drivers

How many passes did you take memtest for?

Code:
Debug session time: Mon Apr 14 14:39:57.702 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 3:33:21.985
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BugCheck 1A, {41790, fffffa800b8e2ca0, ffff, 0}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800b8e2ca0
Arg3: 000000000000ffff
Arg4: 0000000000000000
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: AvastSvc.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
BiosVersion = 2201
BiosReleaseDate = 11/22/2013
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Apr 10 10:21:01.348 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 8:53:05.394
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+27e08 )
BugCheck 1A, {31, fffffa800f46b160, fff... Read more

Read other 1 answers
RELEVANCY SCORE 90.4

I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are:

Driver IRQL not less or Equal
System Service Exception

and these two I just got before I decided to post:
Interrupt Exception Not Handled
No More IRP Stack Locations

I recently took this desktop back from my brother. I bought a new harddrive and installed a fresh Windows 7 x64 Home Prem. on it. I have two other HDD's connected too, a 1TB and a 500gb. I built this originally (and I had no problems when I built it) back in 09. System Specs are included. I replaced the RAM too. I know it isn't on the Approved List for my mobo, but nothing on the mobo lists 8GB and I'd like to use 8GB.

My parts are:

Asus P5P43TD Mobo
Core 2 Duo 8400 Wolfdale
(2x4gb GSKILL F3-12800CL9D-8GBRL)
XFX Radeon HD4890 (but i hadn't noticed, but radeon now only sets out drivers for the entire series, 4XXX, etc.)
Sunbeam (Ithink) 780w psu

I'm not in the market to buy a new performance pc (although the parts I have my eye on are roughly 1400)

Please lmk what you think I should do.

A:BSOD doing random things (Google Chrome, minecraft, random times)

I see some memory corruption in the dumps. Can you follow this tutorial: RAM - Test with Memtest86+

Report back after the tests

Thanks Ant

Read other 3 answers
RELEVANCY SCORE 89.6

Over the past few days I've been getting BSoDs, and I would just go back to what I was doing, but I've had 3 bluescreens within the past couple hours, and I'm not sure as to what can be causing it. Help would be greatly appreciated.

Attachment 316488

A:Getting a BSoD error at random times

(The attachment is the .dmp file created)

Read other 2 answers
RELEVANCY SCORE 89.2

Hi All,

First time poster and hope somebody can help.

Have been getting BSOD for a few days now. All at random times, while using the internet, watching movies or just playing music.

Have even formatted but of no use.

Most recent BSOD was MEMORY MANAGEMENT but its different all the time.

A:Random BSOD messages, happens at random times while using computer

Welcome.

Could you configure the system to collect small memory dumps.Dump Files - Configure Windows to Create on BSOD

Read other 1 answers
RELEVANCY SCORE 89.2

My PC keeps crashing and i have no idea why.

A:BSOD at random times caused by random drivers

Dont use a BETA display driver.

Uninstall the installed display driver using DDU. Then install the CCC 14.4 WHQL only.

Also Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD after doing these two.
_______________________________________

Code:
fffff880`0786c6d8 fffff880`03ed7eccUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x4fecc

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff880110ec200, fffff88004053258, fffff88004052ab0}

Probably caused by : atikmdag.sys ( atikmdag+10200 )

Followup: MachineOwner
---------

Read other 9 answers
RELEVANCY SCORE 89.2

Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran

A:Daily BSOD random times random Apps

  
Quote: Originally Posted by bskaggs


Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran


Hi bskaggs,

Welcome to Seven forums.

Here are you bugcheck details:






Quote:
YMBOL_NAME: dxgmms1!VidSchDdiNotifyInterruptWorker+b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME: dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5164dc13

FAILURE_BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b

BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b


Update your video driver from here and not from the Windows Update:

Drivers & Downloads | Dell US

Also, perform a clean startup to ensure no conflicts with the background programs:

Troubleshoot Application Conflicts by Performing a Clean Startup

Keep us posted with the results so we can advise you further.

Read other 1 answers