Over 1 million tech questions and answers.

Re: Battery charging only works when lid is closed (sleep mo...

Q: Re: Battery charging only works when lid is closed (sleep mo...

I have the same problem, tried the aforementioned solutions, to no avail. I think this is a design flaw and no simple solution. I suspect some type of viltage control board has failed.It woukd be nice to know what the sikution is, even if it is too expensive to fix.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Re: Battery charging only works when lid is closed (sleep mo...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 120.4

I have a HP DV6 7000 laptop. Battery charging only works when lid is closed (sleep mode). If I close the lid and plug in the charger, the indicator light shows orange, and the battery will then proceed to charge to near full. If I open the lid prior to the orange light changing to white, the battery icon always says: __% available (plugged in, not charging). Several different chargers give identical outcomes. ALL of them will fully charge the battery in about two hours; provided that, the lid is kept closed. If I open the lid, even at say 50% charge, the orange light switches to white, and the battery icon always says: __% available (plugged in, not charging). Thanks, Ed.











Solved!
View Solution.

A:Battery charging only works when lid is closed (sleep mode)

Hi @ElyMayor   Thank you for your reply. The last thing I can suggest trying is a restore back to factory.  Performing an HP system recovery (Windows 7) While doing the recovery there is an option to backup your personal files. If you have not previously done one now is a good time. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7) You can also contact HP support for assistance. They can remotely access your system to help alleviate difficulties.  Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.World Wide Phone Support 

Read other 8 answers
RELEVANCY SCORE 72

My Yoga 920 seems to ranomly wake from sleep when the lid is closed. I'd had several occasions when travelling to find my latop completely dead when I needed it - or finding it burning up in the confines of my bag. A few times, I've been alerted to problem when I happen to hear my laptop make a notification sound. When this happens, the screen is already on when I open the lid and much of the bettery has been used. I've seen this occur both in and out of my bag. Nothing is plug into the laptop other then the dummy USB holder for the pen. I have Vantage installed and all updates have been applied. 

Read other answers
RELEVANCY SCORE 70

I have purchased a new battery installed in my elitebook 8460p and it wont charge not even detecting there is no light, however if I install only the battery the laptop starts but not taking the charge Please help...Thanks

Read other answers
RELEVANCY SCORE 62

Dear All,I have Lenovo Thinkpad T460S purchased almost a year ago. Today I suddenly faced problem in charging battery. Charger is plugged in and battery icon is showing "plugged in, charging" but actually it is charging very slowly. Normally battery is charged in one hour or so but today it took more than one hours to reach only 24% or so. Furthermore, soon after plugging in, battery icon shows "filling in process" for few seconds then stopped i.e no filling in process. Furthermore, after whole night charging, battery is now 94% charged, battery 2: 100% charged, fully charged; battery 1: 0% charged, not charging (please attached images).Please guide how to get rid of this problem?Thanking in advance. Shahid

Read other answers
RELEVANCY SCORE 57.6

Hey, I really need help. I'm having problems with my laptop. It's a dell inspiron 7559 and was bought around January. Recently I have seen that the battery has no longer been as hot as it used to be when I first started using it. Along with the sleeve on the tip of the screen power adapter (below the part where the adapter lights up) has started to come off, exposing the wires. The battery has continually dropped down its percentage rate ever since I bought it, and it won't go back up. It is currently at 0% battery life and it says when you highlight over the battery icon ( plugged in, not charging). It also happens to show the BIO setup when I start the computer and shows that the batteries wattage and type cannot be determined. In the BIOS setup, the ac adapter type is unknown. The battery has not been through any harsh conditions along with the laptop. I have tried removing the battery, starting up the computer with the ac adapter (which is 130 watts), then adding the battery back, and ac adapter, then turning it on, but it had no effects. If I remove my ac adapter while my computer is on ,it instantly turns off. If someone can support me with this issue, it would be gladly appreciated. Thanks.

A:Laptop battery not charging, battery not identified, 0% battery life

It sounds likely the charge circuit on the mainboard is damaged.  Contact Dell to have the mainboard replaced under warranty.

Read other 1 answers
RELEVANCY SCORE 56.8

Hi everyone,I am facing a problem here. My G505 doesnt show battery charging animation; when i boot up the animaion shows upto 5 cycles, and then stops. My lenovo enerygy management is in the 'Maximum battery life'mode. The AC power adaptor works when I remove the battery and start up the computer. The indicator lights for battery remains amber colored with slow blinking.Please help me with my problem.Thanks, Vicky


























battery.jpg ?30 KB

Read other answers
RELEVANCY SCORE 56.8

Hello and peace on you..
I have a DELL Inspiron N5110 from early 2011
I was using the laptop correctly..The laptop was plugged in and the battery was charging..Then i removed the charger let the laptop on battery until suddenly the laptop shuts down without even telling me that the battery is low or even leaving some "emergency" charge on it (usually 7% or 5% i don't know)..I plugged it in to charge it again and open my leptop and i found out that the battery is not taking charge anymore!
I tried to see if the propblem is with the connector and tried to remove and put in again the charger and it ddid not work
i tried also to remove the battery and put it in again, it did not help
Now it is stuck on 2% of charge from 5 days and it's plugged in!
The laptop says that the battery is charging, but actually it is not charging and the charge level is the same from days
I looked up some solutions online like uninstalling ACPI microsof from Device manager and reboot the laptop..It did not work
"Jauge de batterie" which is an integrated software related to DELL, says that the battery health is good and that my battery is working properly
The laptop works fine with only the charger plugged in and battery out
PS: the laptop heats usually but i think it did not affect the battery at all since it was working fine and the charge took me about at minimum 30 min on high performance to be emptyed before this happens.
Please, i'm seeking for help
I hope you can ... Read more

A:Battery says: Charging, but it is not actually charging while plugged in and is stuck in 2% for 5 days !

First thing to check is wherther the sysetm recognizes the AC adapter - F2 at powerup to check that.
If it doesn't, try a new Dell OEM AC adapter - if that doesn't fix the issue, replace the DC jack board, and if that doesn't solve it, the mainboard.  Note:  you MUST use a Dell adapter - NOT a third party unit.
If the system DOES recognize the AC adapter, but won't charge the battery, chances are the battery is bad and will need to be replaced.
You cannot solve the issue without checking and, if necessary, replacing these parts.  

Read other 3 answers
RELEVANCY SCORE 56.8

Hi ! Over the past two weeks I've spent my time troubleshooting why my recently (used) bought X240 is not charging the internal battery. Short timeline: 1. Bought used X240 in good condition but with dead internal and external battery - working well when using power supply.2. Came home and tested that thing -> both batteries show "0% - not charging" (with Win10Pro installed) *suprise, surprise*3. Ordered both new internal and external battery.4. External battery came 1.5 weeks ago. Installed it and worked like a charm (Battery 2 (external): X%, charging).5. Internal battery came the day before yesterday. Installed it and did not work -> "Battery 1: 53% - plugged in, charging - Battery 2: 6% - plugged in, not charging)6. Waited the recommended 6-12 hours like it was written in the "manual" to get it fully charged.7. Next morning -> Batterystatus unchanged (see point 5) ... It's stuck at 53%. Though the status says it's charging, it doesn't.8. Simply tried out what's going to happen when I pull the cable of the power supply -> Notebook instant off *hmmm*9. As the external battery was obviously blocked from charging by the internal (as it was not charged), I've taken out the internal battery again and et voila, external battery is charging again.I've tried to remove both batteries and perform the "Magic Trick" (press the main power switch for 30 secs) and I've also pushed the "reset" switch on the backside near the battery. Sadly without any result ;-(... Read more

A:X240 internal battery not charging though "plugged in - charging"

Did you buy Lenovo or aftermarket batteries?  It could be defective

Read other 2 answers
RELEVANCY SCORE 56.8

Please help me,I have a Lenovo laptop G series with windows 8,my laptop problem is that the battery is not charging but when I click battery icon "plug in charging" but it still not charging,why?

Read other answers
RELEVANCY SCORE 56.8

Hi...

I am having a problem with my laptop computer. I figured out that my laptop, when being charged or using the Power Outlet, runs at 100% CPU at times, and slows me down when running and working on some open applications. At first I thought I had tons of spyware or even a virus, and even posted a Hijackthis file here. Nothing was found.
I figured out that my cpu runs at 100% when using the power outlet, or when my computer is chargnig. When I unplug the powercord and use the battery life, everything runs GREAT!!!!! my cpu drops to a normal 4-8% usage with multiple applications running. WEIRD huh? Can anyone relate to this ?? Is this and indication that my battery is going bad???? Can someone help me with this or suggest what is going on? I am running windows XP home edition, and have a compac presario 1500 series. Pent 4..

HELP!!!
 

A:CPU runs at 100% when charging laptop battery, when not charging its fine. HELP!!!

Read other 7 answers
RELEVANCY SCORE 56.4

My brand new HP Pavilion x360 will only charge when the lid is closed or the computer is in sleep mode. I have tried changing any relevant power settings and have already consulted multiple friends. I'm wondering if there's a hidden setting I have yet to discover or if my battery is busted. The computer is under warantee so if I have to I can take it back to bestbuy and have it replaced, but if there's a dyi method that I've yet to try I would like to get all those out of the way as best buy is rather far away from my house.

A:Laptop only charging when lid is closed or computer is in sl...

Hello @dupbuck, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your notebook computer only charges when the lid is closed, or when the computer has entered sleep mode, and I would be happy to assist you in this matter! To configure your power options for charging when the lid is both up and active, I recommend following the steps in this document on Managing Power Options (Windows 8). Additionally, I also suggest following the steps below to reset the default power schemes for your computer: Step 1. Click the Start buttonStep 2. In the search box, type "Command Prompt"Step 3. Right-click Command PromptStep 4. Click Run as administratorStep 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, and I look forward to your reply!Regards

Read other 4 answers
RELEVANCY SCORE 55.6

Hi Support,
I have issue about battery with my laptop (Dell Precision M5510). Windows 10.
It stop charging at 45%. Show mess plugged in, not charging.
I try fix with tutorial on youtube
In Bios, I try change to option Standard. Battery infomation Excellent
But cannot fix. Please help.

A:Battery stop charging at 45%, plugged in, not charging

Does the system correctly identify the AC adapter, or does it show "unknown"?  F2 at powerup to check.
Is the battery the original one that arrived with the system?

Read other 1 answers
RELEVANCY SCORE 55.6

Battary not charging showing plug in not charging , laop top was purchase in july 2015 from Vijay Sales mumbai chembur. Pl give some solution

Read other answers
RELEVANCY SCORE 55.6

I've had my HP Envy laptop for about 3 months, and yesterday I noticed that when it was plugged in it wasn't charging (the battery icon says "plugged in, not charging"). I turned it off overnight, plugged in, and this morning the battery was fully charged. It only seems to not charge when it is turned on. I have tried removing the battery, turning on, deleting the ACPI-compliant control method battery, turning off, and turning back on again (as advised in other forum responses), but with no joy. At first I thought it could either be a battery issue, but the fact it fully charged overnight whilst off would lead me to believe it's not, and is probably a software / settings issue. Any ideas please, I've run out of google search ideas!!

A:HP Envy Battery Problems - not charging when on, charging fu...

Hello HowfenClaret, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information. How Do I Find My Model Number or Product Number?Which Windows operating system am I running?Is the Windows Version on My Computer 32-bit or 64-bit? Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!

Read other 9 answers
RELEVANCY SCORE 55.6

For some time have received the error message regarding under power smart adaptor with newer replacement HP adaptor matching original.  Battery icon lists % charge & "not charging".  Battery tests good in HP Support Assistant battery check.  Power adaptor will power my older Pavillion laptop but not  the Envy with or without battery installed.  Battery charging LED does not light.  Have tried re-calibration by deleting Microsoft devices in Device Manager.  Envy will operate with and without battery while using Dell power adaptor. Computer repair shop says Smart adaptor produces 0 voltage (even though it powers Pavillion) and I need a new battery (even though diagnostic test indicates good). Help!!!

Read other answers
RELEVANCY SCORE 55.6

Hi,
I have a dell xps 12, bought in 2012. Recently the battery stopped charging. The battery shows 0%, so I have to be plugged in to turn the laptop on. When it is on, the battery icon on the task bar says "plugged in, charging" but after a day it is still 0%.
Since then I bought a new battery. Just fitted it, but now the battery icon on the task bar says "plugged in, not charging". Furthermore, when I Fn+F3 to show the battery meter, it says "battery charging diabled". There is no option here to turn battery charging on. Nor is there an option to enable battery charging in BIOS. 
BIOS does show battery performing normally, so does the battery meter (Fn+F3). BIOS also shows AC adapter as 45W, which is the original adapter.
Any help is appreciated!

Read other answers
RELEVANCY SCORE 54.8

Can someone help me with this problem? So I just received my brand new Dell Inspiron 15 3000 and the battery is not charging. It says it's "Plugged In, Charging" but it never goes up and stays at 0%. At first I thought I just need to plug it in for several hours but it's been 5 hours now and still the battery stays at 0%. I tried running the BIOS Diagnostics just to see if there are problems and there's none. The battery status says everything is running normally and the Battery State says it's Idle. I tried draining the flea power several times, removing and reattaching the battery, but to no avail. I'm getting really frustrated and I'm really close to throwing this laptop back to Dell. 
I read somewhere that I have to update the BIOS but it won't update unless the battery is charged at least 10%. Someone also suggested that Windows 8.1 is causing the problem. I haven't even started using this laptop and it's already giving me a *** ton of problems. Any help would be much appreciated! Thanks guys! :)

Read other answers
RELEVANCY SCORE 54.8

The battery status toggles between not charging, not used, and unauthorized battery after it was calibrated using one key. Before that, the battery was working perfectly, lasting close to 5 hours. Now the laptop shuts off when unplugged and the battery status is constantly changing. I've had this laptop for approximately a year now and it was unused and left in an unopened box for the first 8 months. 

Read other answers
RELEVANCY SCORE 54.8

Hello.  I would be grateful if someone can help me with solving the following battery issue.
My XPS13 9343 (with Windows 10, 2015 model) recently stopped charging when connected.  I have conducted BIOS test, stress test, system test, battery test recommended on Dell forum, but could not find any issues.
Then ran device manager and checked & updated drivers, tested for virus, scanned the system, but could not detect any issues.
Lights on AC adopter is on (static) , and the front light under the touch pad turn on white briefly when connected then turn off immediately when plugged in (when disconnected, orange light comes on).
It seems charging is disabled...I might have touched keys without realizing (I checked whether there were hot key to enable/disable charging, but could not find one).
Since it is an ultrabook, and the battery has no issues, I have not opened the back to take out the battery.
I brew into the connecting hole, but it did not solve the issue.
Please help!

A:XPS 9343 (2015) battery not charging - no issues with battery or AC adopter when tested

Dear ejn63,
Thank you very much for the quick reply.
I just did F2 at powerup and found the adapter was displayed as 'Unknown.'
I would order the new AC adapter today and see how it goes.
Will report when solved.
Thank you again.

Read other 2 answers
RELEVANCY SCORE 54.4

HI , I'm have ing trouble with my HP Pavilion 15p077TX  Notebook (1yr 6 months old), its battery charge got stucked at 2% (nor further charge loss nither is it getting charged), I'm currently using it via my AC Adaptor and the irony is that I'm posting this from it in the same condition. Things i've tried so far:- Updating the bios (Current BIOS Version/Date : Insyde F.42, 18-03-2015) {I have a doubt about the bios version here cause when I tried to check the current bios its showed me this one and F.7 for Intel Processor, not sure If its the proble with this case.}- Uninstialling the ACPI -Compliant Control Method Battery andn then redetecting it- Updating the support assistant and running the battery check which gives an unknown 93 error (tried both VERSION:  8.2.8.25 and VERSION: 7.7.34.34 )- Unpluging the battery and the ac adapter and holding the power button for a whole minute-Tried HP Diagnostic Tools' Battery Check which took like 10-15 minutes and responded as no battery is pluged in. Right now I don't have much in my mind to try on this, If anyone knows anything please do share, that might me helpful.Thanks in Advance.Enigma 











Solved!
View Solution.

A:Battery check Unknown 93 status, Battery not charging, stuck...

Hey @EnigmaDimirti, Welcome to the forums. I'm here to help. I would strongly suggest Testing and Calibrating the Battery. Should that not solve the issue, I would suggest calling in for support to see about replacing the battery, as it should not be displaying "no battery is pluged in" when you run a battery check. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html If this helps, please hit that Thumbs Up, and Accept as Solution. Cheers,TechSurge.

Read other 4 answers
RELEVANCY SCORE 54

Laptop will only charge to a max of 86%. Battery test indicates OK. After recalibrating batterythe max charge was reduced to 76%. Will a new battery solve this or could this be something more die?If new battery is necessary, can HP provide it or am I forced to go to 3rd party supplier?

Read other answers
RELEVANCY SCORE 54

HP g6-1b60us Notebook PCHere is the situation and symptoms. Battery not charging. Battery icon indicates battery being charged, but it sits at 5%. Have bought a replacement HP battery and that battery will not charge also (it sits at 50%, which I assume is the initial charge it came with). Run the HP Support Assistant and both batteries fail the test saying that cell 4 is bad (cells 1 to 3 have charge, but cell 4 has a 0 reading, even in the new battery). (Is there a problem accessing/charging cell 4?)When the battery is installed and the AC adaptor is unplugged, and the laptop is turned off, the battery charge LED shows a white LED (red/amber indicates that it is charging the battery); now the only time the LED goes out is when the battery is physically removed. Before the problem began, the battery charge LED would be off when the battery was installed and the charger was not being used. Now the battery charge LED goes off only when the battery is physically removed.What I have tried:Cleaned the contacts.Bought a new HP battery.Tried the complete discharge method of turning the laptop off, removing the power cord and battery and holding the power on key for over 30 seconds.Have done safe restarts.Reset to HP recommended settings.Suggestions/recommendations?

Read other answers
RELEVANCY SCORE 54

I have an older SL510 laptop, which has been working very well. But recently the battery power was continuing to diminish until recently, it stopped holding a charge altogether. At this stage, the orange battery indicator started to blink continuously at a rapid rate. I am still able to power up the laptop with my power cord connected. Purchased a new battery to replace the old and assumed light would go to green after charging. Unfortunately, after several hours connected to the charger, the battery light continues its constant orange blinking. Went through the process of uninstalling the ACPI file as noted in another post. Followed these steps:1. Disconnect AC2. Shut down3. Remove battery4. Connect AC5. Startup6. Under the Batteries category, right-click all of Microsoft's ACPI Compliant Control Method Battery, and select Uninstall (note that it is all right if you only have one).7. Shutdown8. Disconnect AC9. Insert battery10. Connect AC11. Restart your computerAfter completed this process, battery light continues to blink rapidly and battery doesn't seem to want to charge, or provide any indication that battery is inserted in computer. This happens whether I'm using either of the 2-power adapters I have for this laptop.What can I do to get this fixed??? Thank you in advance for any assistence provided!!!

Read other answers
RELEVANCY SCORE 54

I am becoming more and more concerned about my laptop's battery each and every passing day. When I check the bottom right of my computer screen to check if my computer battery is completely charged, it says "0% available (plugged in, not charging)". I have had to buy two new batteries because of the same thing and they also read "0% available (plugged in, not charging)". When I unplug my laptop from the power source, it turns off automatically. I cannot even bother calling Dell to check this issue for me because I bought this computer off the street for $35.

My question in general is how do I get this problem fixed and how do I keep an eye on how my laptop computer charges correctly (or not)???

A:General Question about laptop battery charging AND 0% battery

Some reading and testing for you

Why is my Laptop battery not charging? – Drivers.com updates

Laptop Battery Not Charging | PCWorld

https://www.youtube.com/watch?v=XcDvp2A7Fss

The common method is:
- Create a System restore point
- Uninstall (Under the Batteries category in Device Manager) the Microsoft ACPI Compliant Control Method Battery.
- WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
- click Scan for hardware changes

Read other 1 answers
RELEVANCY SCORE 54

I have just replaced my CMOS/BIOS battery today, as , I have faced some critical problem regarding regular BIOS date/time reset after system shutdown. But I want to know how do i recognize, that my new batter is totally ok or functional.

Battery Meter gadget shows that "battery Not charging"
Is it a gadget problem?

Is there any method available so that I can track that my new installed CMOS battery in PC is working fine?

Please help me.

A:Battery Meter shows CMOS battery not charging

The battery you have replaced is solely there to maintain the clock and other BIOS settings (if you have changed them from their defaults). It will not prevent you from booting your system if it is dead/missing; all it means is that you will have to enter the BIOS each time and make the correct settings and time. This battery is not rechargeable.

Do you still have to enter the correct time, or is the BIOS maintaining this now you've changed the battery?

Read other 5 answers
RELEVANCY SCORE 53.6

Client's relatively new Yoga 500 is exhibiting a weird problem in Windows 10 anniversary edition. The battery is currently at 47% but keeps flickering between charging and not charging. The icon changes every second, possibly faster. Tried swapping power supplies so it's not that. When first reported, the battery was at 40% but then got to 47% during a reboot. The battery on the Yoga 500 is internal so not possible to try swapping batteries. Any ideas or suggestions?

Read other answers
RELEVANCY SCORE 53.6

Need Help!

The problem started from June 2, 2015 about 4 AM (UTC +8:00 Philippine, Manila)

I open my Notebook that morning to check on my e-mails and bills at gmail but it's not powering up. At first I thought that the battery was slightly drained because I saw my sister still using it at midnight. I asked her if she did not plugged in the charger when it is nearly drained but she said she plugged it and it is still full when she shut it down.

It is Li-ion Battery

I tried plugging in the charger to check whether it still has remaining battery. It powered up.
On the taskbar/notifications/running apps it says 8% Available (Plugged In, Charging).
So to check out the problem, I left it turned off charging for about two hours.

Then after two hours it still says 8% Available (Plugged In, Charging)
What the hell is this?! I asked my self.
I installed an app to check the status of the battery (Battery Bar)
Battery Bar says something like this:
Capacity: 2K of 8K mWh (not sure about this)
Charging: 0 mW
Running on AC
7.9% Available
Something like that.

Summary Notes:
1. Does not power up without Charger
2. It detects the Battery saying 8% Available (Plugged In, Charging)
3. Though Plugged In, Charging it does not charge at all because of 0 mW charge rate
4. It turns off when the Charger is plugged out.
5. It still run even without the Battery (when the Charger was plugged in of course, then a red x mark shows in the notification taskbar battery icon)

Thus:
1. The problem is som... Read more

A:Help!!Battery:Plugged In,Charging(but not really charging)

How old is it? Most likely the battery if you use it a lot on battery power, not plugged in.

Read other 2 answers
RELEVANCY SCORE 53.6

To whom it may concern.I am in desperate help..... I have tried every solution i have managed to find on the internet but none of them work. I have a HP ProBook 450 G1 Laptop. When plugging the power supply in the batery shows that its charging but it never actually charges but simply remians on at same level.....I have checked the power supply as I have an exact duplicate laptop at my disposal, same with the battery. The battery charges perfectly in the other laptop but not in my laptop. When swithcing the batteries form the other pc it will not charge in my PC. bot both are fine in the other PC. I have removed the battery, checked power supply, un-installed and reinstalled the ACPI-complaint and adapter as suggested by most. I have done what ever solution i can have managed to find but neither have worked but the battery works  just fine when inserting into the other duplicate laptop and charges fine. I have tried to instal or upgrade BIOS settings etc. Nothing has worked for me! Please can someone point me in the correct direction!!!!!! Your assistance is greatly appreciated.

Read other answers
RELEVANCY SCORE 53.6

HelloHP EliteBook 840 G2The indicator shows: Battery plugged in, chargingbut really the battery not charging - bar doesn't movePlease help, what to do?

A:Battery plugged in, charging - but really not charging

Dear Customer,Welcome and Thank You for posting your query on HP Support ForumIt looks like your Notebook is not charging the Battery, We will surely assist you with this issuePlease perform below shown steps to resolve the issue:Step 01. Click on the Start ButtonStep 02. Type "Device Manager" in the start search box & open the Device ManagerStep 03. Look for Batteries and expand it by click on the + symbol on the leftStep 04. Right Click on "Microsoft ACPI Compliant Control Method Battery" & uninstallNote: This Battery driver will get re-installed automatically when you restart the Notebook againStep 05. Please Shutdown the NotebookStep 06. Please remove the Battery and unplug the Power AdapterStep 07. Press and Hold the Power Button for full 1 MinuteStep 08. Go ahead and put back the Battery and connect the Power AdapterStep 09. Look for "Plugged In Charging" message on the Battery iconAfter performing all the steps if you are facing the same issue still, please perform three more steps:1. Run a Battery Check in HP Support Assistant[Install the Software if it's not available]Note: Replace the Battery If Health Check Status shows Replace2. Update the latest BIOS for your Notebook from HP Support Site3. Please check your Notebook with a known good Power Adapter & Battery from a different NotebookNote: If a known good battery is also not charging we need to replace the system boardHow to improve the life of a Battery:1. It is not advisable to use the Notebook when ... Read more

Read other 8 answers
RELEVANCY SCORE 53.6

Client's relatively new Yoga 500 is exhibiting a weird problem in Windows 10 anniversary edition. The battery is currently at 47% but keeps flickering between charging and not charging. The icon changes every second, possibly faster. Tried swapping power supplies so it's not that. When first reported, the battery was at 40% but then got to 47% during a reboot. The battery on the Yoga 500 is internal so not possible to try swapping batteries. Any ideas or suggestions?

Read other answers
RELEVANCY SCORE 53.6

I have a Pavilion g7 series laptop.  I just pulled it apart to replace the fan, and now when I close the lid the laptop no longer goes to sleep.  I did not make any changes in the power options, so I assume I didn't get the laptop reassembled correctly after replacing the fan.  What makes the laptop know the lid is closed to sleep, and where do I look to make sure I get it put back together correctly?  Thanks!!

Read other answers
RELEVANCY SCORE 53.6

I've had about 5 instances where I've closed the laptop and put it in my laptop bag to pull the laptop out an hour later and have it be super hot.  It seems something has hung the system up from sleeping like it should when I close the lid.  I'm sure eventually I'll start getting thermal damage, especially the Samsung 950 NVME drives, so I am a bit concerned.  I usually pay attention now that I know this happens, but occasionally forget like today and worry about the damage that could be caused if it was left for an extended amount of time. Thanks in advance for any help! Laptop is a Lenovo P50 with a Xeon processor. Memory is Kingston HyperX 4x16gb 2400mhzHard drives are Samsung 950 m.2 in raid 0, and a Samsung Evo SSD 

Read other answers
RELEVANCY SCORE 52.8

Hi, I have read many people have similar issues for other models other than my Thinkpad x240 20AL but removing the battery won't solve my problem. It is plugged in, it says plugged in but battery is not charging (none of the two batteries this laptop has). I have gone to Driver Manager and uninstalled the 3 Microsoft drivers under battery section. After restarting or scanning for new hardware these drivers appear again and the problem is not solved. I have restarted de computer. Problem not solved I have removed the batter and put it back. Problem not solved. After one night, I switched on the laptop and one of the battery has charged. Right now it says plugged in, charging and it shows already 100% although it keeps charging. The other battery still shows 98% not charging.. I believe this must be a software issue, some power management that prevents the laptop from charging the battery. But where is that software and how to configure it or remove it? I have looked for Lenovo Power Management and similar and it is not installed on my laptop. Anybody knows what I am talking about?

A:x240 - battery - plugged battery not charging

I have a very similar problem, how was yours fixed in the end?Someone please help, very frustrating!

Read other 3 answers
RELEVANCY SCORE 52.8

For quite some time now i am having a problem with my battery not charging.
My laptop model is "DELL INSPIRON 15R SE 7520" running "Windows 8.1".
Sometimes when i Switch ON my laptop i receive an error saying "WARNING: The battery cannot be identified. The system will be unable to charge this battery.Strike the F1 key to continue, F2 to run setup utility."And when i press F1 computer starts normally but it doesn't take the charge from the adapter.
And sometimes it would just start normally without any warning. It accepts the charging and everything goes well.
THINGS I HAVE TRIED:

Purchased a new battery "DELL ORIGINAL 6 CELL Li-Ion Battery".(old one was a 4 CELL battery).
Tried using 2-3 different adapters of the same model but no luck.
Tried using 2-3 different batteries(all 6 CELL as no 4 CELL battery is available in the market nearby). This too didn't work.
Tried removing the battery and using computer with only power adapter connected. Doesn't give any message and worked properly.
Tried using laptop with only battery having some charge in it. Gives the warning on startup. And won't charge if adapter is connected(shows plugged in,not charging).
Tried updating the BIOS driver.
Running hardware diagnostics when receiving the warning at startup gives:Error Code- 2000-0132Validation- 115087Msg: Battery- The battery is reaching end of its usable life.
Running hardware diagnostics when no warning appears at startup give:Al... Read more

A:BATTERY CHARGING PROBLEM (BATTERY NOT IDENTIFIED)

If you've tried multiple adapters and batteries to no effect, the only thing left is that the mainboard is bad.

Read other 2 answers
RELEVANCY SCORE 52.8

I know that a battery not holding a charge can sometimes be a motherboard problem, I don't want to spend the extra $50 on a new battery if it is the motherboard. Is there any way to decipher which one is the culprit.
 

A:Motherboard not charging battery or battery dead

Batteries are consumables... They should always be changed first if a charging problem appears
 

Read other 1 answers
RELEVANCY SCORE 52.8

For a few months now, at some point my battery would indicate nn% (plugged in, not charging) and would maintain that charge as long as it was plugged in. Running on the battery, the charge would eventually diminish and in order to get the battery to charge again, I have gone through to process of uninstalling the ACPI Compliant Control Method Battery in Device Manager. Usually within 24 hours, things would revert back to plugged in, not charging. However, that is no longer remedying the problem. (When this was an issue the indicator light next to where the AC Adaptor plugs in would flash blue. Also, I upgraded from Win 8.1 to 10 a few weeks ago, but this issue has been occurring for a few months now). Now the battery reads 2% (plugged in, not charging) and when I use the HP Support Assistant to check the battery, I get the message ?HP Battery Check was unable to access the battery?. I have performed a hard reset, reset the BIOS, and updated the BIOS, all to no avail. If I unplug the adaptor, the computer shuts off. Any suggestions for additional fixes? I have seen one additional suggestion to do a system recovery but I have not yet made a recovery disk for win 10 (I do have one for the win 8.1), and would it make any difference anyway since the plugged in, not charging problem was occurring under win 8.1?

Read other answers
RELEVANCY SCORE 52.8

I was notified of the battery recall and removed the battery to get its serial number.  After putting the battery back in it will no longer charge.  The light next to the power cord plug in also is no longer lit even with the power cord in.  I ensured the powere cord was properly pluged in.  Everything was fine pior to removing it and putting it back in.  Very strange.  Is there something that has to be done once a battery is taken out and put back it?

Read other answers
RELEVANCY SCORE 52.8

Hi,
first time here, I have about a week experience (pulled out some hair) with windows 8/8.1, but I consider myself pretty comfortable with Windows in general.

When my win8.1 laptop is in sleep mode, I can wake it with a mere touch of my external bluetooth k/b without any issues, as long as the lid is opened. If I close the lid, I can continue to use it as its connected to a big Samsung plasma tv. But if I let the laptop go to sleep (or put it to sleep myself thru the menu), I am unable to wake it back; I need to pull it out from a/v furniture, open the lid and press the power button.

Is this a win8 thing, an Acer Aspire thing, or worse it can't be done?
Anyone else able to wake from sleep their win8 laptop w/closed lid???

Thanks

A:Waking laptop from sleep with lid closed

Try going into the power options and set the option for what to do when the lid is closed to "do nothing".

Read other 26 answers
RELEVANCY SCORE 52.8

I am not sure when this started, but my P50 is set to sleep on AC or battery after x hours of inactivity. It resumes with the touch of the power button, but all apps are closed.  I have tried setting power settings to allow for hybrid sleep, but this has not helped.  Some posts indicate that maybe apps are closing when resuming from sleep, and not when going into sleep, but i can't seem to find evidence either way.  My system has 64gb of ram and 2 512gb PCI SSD. Any suggestions on where to look? 





* Search box is your friend * I don't respond to PM if question belongs in forum

A:P50 apps closed when resuming from sleep

Now i suspect the machine is restarting or crashing somehow.  I noticed event ID for machine entering sleep, but then event ID 12 - operating system started. Minidump folder has a 0 KB DMP file at that time. Machine was set to restart on blue screen, so tha may be it.  I see minidump files from other dates too, but i have never seen a blue screen. More digging. 





* Search box is your friend * I don't respond to PM if question belongs in forum

Read other 2 answers
RELEVANCY SCORE 52.8

I have a Dell Studio running Windows 7 Home Premium 64bit, and the laptop doesn't sleep when I close the lid, except I double-checked my settings in the control panel and it's supposed to sleep.

I've had the computer for over 6 months now and the problem first started yesterday, right after I installed the latest Windows updates. When I close the lid, the computer doesn't sleep, but even when I open the lid, nothing appears on the monitor. It's still black and unresponsive, although the power button isn't blinking, so I know it's still awake.

A:Laptop doesn't sleep when lid is closed

Hello ieatlikeawolf, Welcome to the Forum.

Could you answer a few questions?
Does the laptop go into sleep mode if you choose Sleep from the start menu?
Have you tried doing a System Restore to a point before you installed the updates?
Did you install Update KB976902 at the same time as other updates?

Read other 8 answers
RELEVANCY SCORE 52.8

There seem to be two times this happens. I close my laptop lid (set to sleep when closed) and then when I reopen it, it restarts and then tells me there was a blue screen. When I click on the option to look for solutions online, the pop-up window just closes and disappears. Other times it has happened when my computer was idle for a while, lid open (presumably it went to sleep), then returned to it and power button illuminated, but black screen. Nothing to do but power off - or if I close the lid for a while, it will then restart when reopened.
Seems totally random. Sometimes doesn't happen for days in a row, then twice a day.
Thanks for your help. Sorry I'm not super tech savvy.

Btw...

Toshiba Satellite A665
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
mobo: TOSHIBA PHQAA
BIOS Date: 03/28/11 17:52:56 Ver: AMI APTIO 1.80
6 GB RAM
HDD: TOSHIBA MK6465GSXN
Sound: (1) Realtek High Definition Audio (2) Intel(R) Display Audio (3) Bluetooth Hands-free Audio
GRaphics: Intel(R) HD Graphics Family
OS: Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

A:BSOD - Usually When Lid is Closed, Maybe Sleep Problem

Welcome aboard, anahata.

Your problem seems to be with your usb port/hub. Is there anything connected in the laptop's USB ports when you close the lid? Say any external HDD or something else? If so, remove those, close the lid and follow if it crashas again.

Turn USB selective suspense on to narrow down the possibility to discriminate if it is being cause by the hardware, or the USB hub driver.
USB Selective Suspend - Turn On or Off

At the same time, try to upgrade your NEC Electronics USB 3.0 Host Driver, using the link provided in the page: Driver Reference Table - nusb3hub.sys.

Let us know the results.

Read other 5 answers
RELEVANCY SCORE 52.8

Hi guys hope every things good there, im fine but im facing some issues with my lenovo z580 it started 2 days ago, the laptop just don't go into sleep mode when I close the lid I removed the power management software, reinstalled but nothing the problem remains does anyone faced the same or similar issue before? Any ideas?

Thanks in advance
 

A:Lenovo z580 no sleep with lid closed

What power management software did you remove? You can't remove the windows power management features.
 

Read other 3 answers
RELEVANCY SCORE 52.8

Hello, I just received an Alienware R2.  I cannot get it to wake up from sleep mode when the lid is closed with my USB keyboard or mouse.  It does wake up from sleep mode with my USB keyboard when the lid is open.  I just updated the bios to Version A05,A05.  Before I updated the new bios, it wouldn't even wake up from sleep mode by hitting the laptop keyboard.  I had to hit the power switch.  
I also have updated the video drives to Version 20.19.15.4312,A04 (Intel HD) and Version 10.18.13.5442,A02 (nVIDIA Geforce).
I am guessing this is still a BIOS problem, but is there a fix?

Thanks.

A:Alienware 13 R2 does not wake from sleep with lid closed

Hello!  So i'm a tad confused.  When you close the lid, the laptop goes to sleep, and when you open the lid it wakes up, but you want it to wake up with the lid closed?

Read other 10 answers
RELEVANCY SCORE 52.8

HiI'm using a HP ENVY TouchSmart 15-j198ez Notebook PC running Windows 10 64bit.I have an external display, and it's the only display I need, hence, the laptop lid is always closed. The peripherals I use are:Microsoft Designer Mouse/Keyboard Wireless Kit - BluetoothWacom Intuos 4 Tablet - USBLogitech Rumblepad 2 Game Controlle - USB None of the above mentioned peripherals wake the laptop from sleep. And I am forced to open the lid everytime I need to use the laptop. Previously I was using a Logitech USB keyboard and a Logitech Wireless Mouse (wth USB dongle) - both were able to wake the laptop from sleep with no problem. Gave up on them because I needed the extra USB slots. I also have a Bluetooth speaker set, which led me to belive that the bluetooth connection of the laptop is closing whenever the laptop is going into sleep, since it starts searching for other devices to pair with. This would explain why the mouse and keyboard can't wake the laptop, even though I have checked the "Allow this device to wake computer from sleep" boxes, for both, in the Device Manager dialogue. Any solutions for this?I would also be happy if the tablet or gamepad would wake the laptop. But the "Allow this device to wake computer from sleep" check boxes are greyed out for these devices. Thanks in advance.   

Read other answers