Over 1 million tech questions and answers.

Y580 Win7 64bit Drivers removed?

Q: Y580 Win7 64bit Drivers removed?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Y580 Win7 64bit Drivers removed?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 64.4

Hallo an alle, ich habe mir ein neues Notebook zugelegt, das HP 15-ba010ng. Es wurde mit FreeDos als "Betriebssystem" ausgeliefert. Zwischenzeitlich habe ich Windows 7 Professional 64 bit installiert. Allerdings kann ich online keine Treiber für die diversen noch unbekannten Geräte finden. Sieht so aus, als wenn es nur die WIn10 Treiber zur Auswahl gibt, finde ich schade. Nun, da ich keine Netzwerkverbindung herstellen kann, kann ich auch nicht den Online Support bemühen. Gibt es eine Möglichkeit, an die Treiber für mein OS zu kommen? Danke schon vorab vielmals für Eure Hilfe!!! Korbinian --- Hi there, i´ve just purchased myself a new Notebook, the HP 15-ba010ng. It came only with FreeDos as OS. I´ve installed Windows 7 Professional 64 bit and i am not able to find the driver for the new OS, seems there are only Win10 Driver available. At this point i´m a little confused, ´cause i can´t take advantage of the Support because i am not able to get the Notebbok online. Is there another way to get the drivers for my OS? Thx a lot, Korbinian

A:HP 15-ba010ng Win7 Pro 64bit Drivers

Yes. You can download the drivers from the AMD website.http://support.amd.com/en-us/download Use the manually select you drivers option. Use the drop downs and ensure that you select just as shown in the following image. The graphics driver software contains the chipset drivers that you need to install.       

Read other 1 answers
RELEVANCY SCORE 64.4

we are deploying win7 and our win 2k3 server is 32bit and has about 40 shared printers and the drivers are in 32bit.
all printers are different model's

is there a way to have these printers work on win7 64bit?

A:printer drivers for win7 64bit

There is no way to really answer this without knowing what the printers are.

The best I could suggest is that you go to the manufacturer's website and see what support they have for the printers under Windows 7 64-bit.

I would also suggest you do this for anything else you may deem critical to your workplace.

Good luck.

Read other 2 answers
RELEVANCY SCORE 64.4

Hi, After having so many problems with Win 8.1  I decided to downgrade my OS into to Windows 7 Ultimate (64-bit).   unfortunately HP driver support does not have any Windows 7 drivers for this particular model (Pavilion TouchSmart 15-b129wm) .So Can someone please help me in finding any or all the device drivers?  The ones I desparately need are: (((SM Bus Controller - Ethernet Controller - Network Controller - Universal Serial Bus"USB" Controller ))) Thank you very much for your help! 

A:Compatible Drivers for Win7 64bit

meshkov wrote:Hi, After having so many problems with Win 8.1  I decided to downgrade my OS into to Windows 7 Ultimate (64-bit).   unfortunately HP driver support does not have any Windows 7 drivers for this particular model (Pavilion TouchSmart 15-b129wm) .So Can someone please help me in finding any or all the device drivers?  The ones I desparately need are: (((SM Bus Controller - Ethernet Controller - Network Controller - Universal Serial Bus"USB" Controller ))) Thank you very much for your help! There is no HP drivers for Win7 version but you need to ask one of the MOD to see if they can locate a matching driver for it from a different HP model that might work.

Read other 2 answers
RELEVANCY SCORE 64

I have never installed a new os from start. Do i need to download drivers for my mobo ready for a fresh windows7 install?

Or does it find them automatically on the windows disc? Or online later? I have drivers on disc for all other hardware, but not mobo.

Just confused before I start.

A:Installing drivers on new win7 64bit ultimate os

Some drivers are available later form Windows Update, and some are built in. The best practice is to have them downloaded ahead of time, especially your network ones, just in case. I usually throw them on a flash drive and keep them handy for when my OS install is done.

Read other 5 answers
RELEVANCY SCORE 64

Hello guys, I need your help again. I have this Laptop from my friend and she wanted it to be reformatted. So I can't seem to find the exact model on this laptop because she don't have the box and the CD drivers and there's no single sticker labeled at the back except for the OS licensed key. Though I already look inside the bios and here's what I got.

Model: HP Pavilion g6 Notebook PC
Product No.: LP224EA#ABV
Family No.: 103C_5335KV
Serial No.: CNF1172HMT

But still can't find the right one I guess, here's the link: Model: HP Pavilion g Notebook PC Product No.: HP Support & Drivers | United States which one of these is the right model?

Here's a shot taken inside the bios:

A:HP Pavilion G Series: Win7 Drivers 64bit

Ok I just found the exact model number underneath the battery slot.

Model: g6-1047se

here's the product:HP Pavilion g6-1000 Notebook PC series*-* HP Pavilion g6-1047se Notebook PC Product Specifications - c02824995 - HP Business Support Center

So my question now is, is it the legit download site of this laptop: HP Pavilion g6-1000 Notebook PC series*-* Download drivers and software - HP Business Support Center is it a legit HP site?

Read other 4 answers
RELEVANCY SCORE 64

Hi!

I need drivers to install WIN7 64x on SSD mSATA THNSNH256GMCT

Serial number on my product is 23NS10BFTABY

Thank you!

A:I need drivers to install Win7 64bit on SSD mSATA

This serial number doesn't help much. It will be better if you can post exact notebook model name and model number.

Anyway, visit Toshiba support and download page for your country and if your notebook model is supported for Win7 64bit you should be able to find all necessary drivers, tools and utilities.

Read other 2 answers
RELEVANCY SCORE 64

I've been asked to downgrade an Inspiron 3647 to Win7 64bit. The install went OK (thanks to the Unofficial Dell Win Reinstallation guide), but I'm missing a few drivers. Here are the hardware IDs. Can anyone point me to the right downloads?
Thanks in advance!
ethernet controllerPCI\VEN_10EC&DEV_8168&SUBSYS_06111028&REV_0CPCI\VEN_10EC&DEV_8168&SUBSYS_06111028PCI\VEN_10EC&DEV_8168&CC_020000PCI\VEN_10EC&DEV_8168&CC_0200
Network ControllerPCI\VEN_168C&DEV_0036&SUBSYS_020C1028&REV_01PCI\VEN_168C&DEV_0036&SUBSYS_020C1028PCI\VEN_168C&DEV_0036&CC_028000PCI\VEN_168C&DEV_0036&CC_0280
PCI Simple Communications Controller PCI\VEN_8086&DEV_8C3A&SUBSYS_06111028&REV_04PCI\VEN_8086&DEV_8C3A&SUBSYS_06111028PCI\VEN_8086&DEV_8C3A&CC_078000PCI\VEN_8086&DEV_8C3A&CC_0780
SM Bus ControllerPCI\VEN_8086&DEV_8C22&SUBSYS_06111028&REV_05PCI\VEN_8086&DEV_8C22&SUBSYS_06111028PCI\VEN_8086&DEV_8C22&CC_0C0500PCI\VEN_8086&DEV_8C22&CC_0C05
Universal Serial Bus (USB) ControllerPCI\VEN_8086&DEV_8C31&SUBSYS_06111028&REV_05PCI\VEN_8086&DEV_8C31&SUBSYS_06111028PCI\VEN_8086&DEV_8C31&CC_0C0330PCI\VEN_8086&DEV_8C31&CC_0C03
High Definition Audio Devices - there was a RealTec update, but it wasn't what i was looking for.HDAUDIO\FUNC_01&VEN_8086&DEV_2807&SUBSYS_10280611&REV_1000HDAUDIO\FUNC_01&VEN_8086&DEV_28... Read more

A:Looking for drivers for an Inspiron 3647 for Win7 64bit

Hi,
Thank you for writing to us!
kindly check the link below which will help you with the drivers .
www.dell.com/.../drivers
Thanks
Robin

Read other 2 answers
RELEVANCY SCORE 64

I have been scouring the interwebs since successfully installing Windows 7 64bit RTM last night when my XP box got the "ntfs.sys corrupt or missing" and I could not for the life of me restore it. Screw XP, it was time to install Windows 7 anyhow right. Every piece of hardware was detected and installed except for my wireless card.

I have a AirNet AWD154, Linkskey LKW-G553, and Airlink 101 AWLH3026T.
Luckily I had 3 total so I was sure one was bound to work, but no, not even after downloading the newest drivers from the manufacturers website. Since at least 2 of the 3 use Marvell Libertas chipsets I figured getting that latest (3.1.1.7) generic driver would work.

In all cases I either get a "no compatible driver found at this location" or "installed but cannot start".

Any direction would be greatly appreciated. Thank you all

A:No Win7 64bit Drivers for 3 different Wifi PCI Cards?

  
Quote: Originally Posted by blufr0g


I have been scouring the interwebs since successfully installing Windows 7 64bit RTM last night when my XP box got the "ntfs.sys corrupt or missing" and I could not for the life of me restore it. Screw XP, it was time to install Windows 7 anyhow right. Every piece of hardware was detected and installed except for my wireless card.

I have a AirNet AWD154, Linkskey LKW-G553, and Airlink 101 AWLH3026T.
Luckily I had 3 total so I was sure one was bound to work, but no, not even after downloading the newest drivers from the manufacturers website. Since at least 2 of the 3 use Marvell Libertas chipsets I figured getting that latest (3.1.1.7) generic driver would work.

In all cases I either get a "no compatible driver found at this location" or "installed but cannot start".

Any direction would be greatly appreciated. Thank you all


BF

I suspect that the drivers are vista 64bit and need to be installed in compatibility mode.

the driver for the linkskey is here Linkskey the version needs the serial number to pick the right one.

hope this helps

Ken

Read other 4 answers
RELEVANCY SCORE 64

Hi, I bought Hp laptop with dos. Please help me finding its drivers for win7 professional 64bit. Product Name: HP Pavilion G6-2289seProduct Number : D3G91EA#ABVSerial Number : 5CD3252D288 Thanks,Awais 

A:win7 64bit drivers for hp pavilion g6-2289se

Hi: You can use the W7 drivers from your notebook's support page...your model uses the Intel graphics driver. http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-2200-Notebook-PC-series/5296082/model...

Read other 1 answers
RELEVANCY SCORE 64

I have a similar issue for sound driver install for a G6-2237US.  I'm on ultimate 7 and can hardly hear the speakers. So have tried the denoted service pack, sp61716, option aborts with "IDTSetup /s" and "unable to excute the command line"... Also going into that software paq once on the drive it shows everything for realtek ethernet controller including trying to run the setup manually? Strange.... Any help here? With maybe a manual install for such drivers? Thanks!!

A:Re: win7 64bit drivers for hp pavilion g6-2289se

Hi: This W7 IDT audio driver should work for you...install and restart the PC. This package contains the driver that enables the IDT High-Definition (HD) Audio in supported notebook models that are running a supported operating system. http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56803.exe

Read other 1 answers
RELEVANCY SCORE 63.2

Hello everyone. I have 3 drivers that were not yet installed and I dont know where to find those drivers for Windows 7 Ultimate 64bit.  3D Video Controller PCI Simple Communications Controller Universal Serial Bus Controller  

Read other answers
RELEVANCY SCORE 63.2

Hello everyone. I have 3 drivers that were not yet installed and I dont know where to find those drivers for Windows 7 Ultimate 64bit.  3D Video Controller PCI Simple Communications Controller Universal Serial Bus Controller  

Read other answers
RELEVANCY SCORE 63.2

Hello again.

I have Qosmio F60-11F and I install *windows 7 ultimate 64 bit* ,I install all drivers from Toshiba site,
and I am facing a problem with some drivers,
1- BIOS Update v B2.10-EC1.60 the message 'this computer not supported.
2- Eco Utility v 1.2.11.64 the message 'unsupported BIOS.
3- PC Health Monitor v 1.5.6.64 & v 1.6.0.64 the message 'not support'.
4- TV Tuner v 2.3.3.31 Nothing happens.



Can anyone help?

A:Qosmio F60-11F - troubles with Win7 64bit drivers installation

Have you installed the Toshiba Value Added Package?

You need the correct TVAP designed for the Qosmio F60 and Win7 64bit. Have a look on the Toshiba website (support/drivers section).

Read other 2 answers
RELEVANCY SCORE 63.2

Hi guys, looking for a little assistance.

I have just installed Windows 7 64bit version.

My computer is a Sony Vaio VGN-NS11J from the EU.

Intel Core 2 Duo - T5800 2GHz
4GB Ram
290GB HDD SATA
Mobile Intel 4 Series Express Chipset Graphics Card

-------------------

I have 2 drivers which I cant find drivers for - 1 of which I believe is a Texas Instruments SD Card Controller.

The details I can glean from Device Manager are as follows:

1st:
Base System Device
Location: PCI Bus 5, device 3, function 2
Physical Device Object Name: \Device\NTPNP_PCI0023

2nd:
Unknown Device
Location: on Intel ICH9M LPC Interface controller - 2919
Physical Device Object Name: \Device\0000005b
The other issues I am having is with getting the FN and Mute button's to work, as well as the Power Control for selecting battery options (ie charged less/more to protect the battery) unless how to do this has simply moved in Win7.

I have looked at the EU Sony Driver Support page for my model but it doesnt contain any drivers to solve these problems.

Thanks in advance and I am happy to supply any additional information/screenshots that would be helpful.

A:Sony Vaio NS11J Drivers and FN Key Win7 64bit

Below link to similar problem
Help getting all drivers on Sony CR4000
Below link to your driver page - VGN-NS11J/S
Vaio : Sony Europe

I gotta go to the dentist - be back later - i think i can find the link to the texas instruments driver - back later

Read other 9 answers
RELEVANCY SCORE 62.4

i did some searching before hand and came up with nothing...even the Dell site is helpless.

i am currently working on a family members Dell inspiron 1501 Laptop.
i just formatted and clean installed Windows 7 Ultimate 64 bit and everything runs just fine, did all updates and the computer runs great, but i cannot get the video card drivers to work or the ATI Catalyst Control Center to "work" right. It keeps saying that it installed the drivers and everything works but the display does not have the Aero capability...its just annoying. Im not sure if he even cares if it has the Aero option, but i have OCD...so it has to be done right...

Im not sure what info is needed to help, so please ask all the questions you can. i really wanna get this figured out, this is the only thing left and his computer will be fresh!

A:Dell Inspiron 1501 no video drivers for Win7 64bit

Visit this site and choose drivers for your OS:

Dell Inspiron Drivers | Dell Inspiron 1501 | Free Download | go4download.com
PS: read the green lines before downloading.

Read other 9 answers
RELEVANCY SCORE 62.4

Good day all .

I read various posts on different area's regarding chipset installation and drivers.

Some info : motherboard is Microstar p45 platinum gamer series.

it comes with 2 sets of cd's #1 for win xp intel chipset drivers&utilities disk.
#2 chipset disk for vista.

question #1 does windows 7 64bit (pro) contain the sata drivers and all the utilities for install ? or do i need to utilize the preinstall of the f6 and make a install floppy? msi has a section for downloads .

I have searched for the uptodate drivers listed in the arcive section where my board is now listed.

I have downloaded all the drivers and a floppy f6 creater to install these files

I am a bit confused as to how i am going to install win 7 on this system .

I may go with a xp/7 duel boot .

I want to add raid 5 after 7 install and i know xp could not see anything beyond raid 0 or 1.
looking for some advice before i start the process.

I hope the thread title is better this time.
if the install sequence works the way i want it to go ; perhaps i can create a tuit.
thanks for everyone's help .
its always appreciated

quester12

A:Intel chipset and drivers install on win7 64bit os on older mb

F6 drivers not need to install Windows 7.
Do download all the Windows 7 drivers from MSI website, & install after Windows 7 is installed.

Read other 9 answers
RELEVANCY SCORE 62.4

Hey,

I am planning to reformat my laptop and is unable to find reliable driver downloads from the internet.

I have been searching around for the Windows 7 driver downloads for this model part PQF75L-041002, a Qosmio notebook model and have not been able to find any reliable links. Is this model similar to another model's drivers completely so that i can install those or not?

Please provide assistance in any way possible.

Thanks.

A:Qosmio F750 - need Win7 64bit Home Premium drivers

Can you please post model name too (F750-xxx)?
What is the country of purchase?

Can it be that this notebook was produced in Asia?

Read other 5 answers
RELEVANCY SCORE 62.4

Hi, these are my system specs:

PSU: Arctic Cooling 550
MOBO: Asus M5A78L
VGA: Club 3D Radeon HD 6870
Fans: 2 x 120mm
CPU: Amd Phenom II X4 955BE + stock heatsink
Wifi: TP-LINK TL-WN781ND
RAM: 2x2gb DDR3 Corsair Value (DDR1333)
HDD: Samsung Spinpoint F3 1TB
Optical drive: Samsung SH-S222AB 22x DVD/CD SATA

Randomly (for example: while surfing the internet), on Windows 7, the computer crashes with a screen with blue and grey vertical stripes (or sometimes totally grey or black).
Sometimes this screen "hides" a BSoD, sometimes it doesn't.

The system crashes only if video drivers are installed.

On Ubuntu 11.04 (64-bit) and Windows XP (32bit), even after installing the drivers, there are no crashes.

In the Event viewer I found this error: (Sorry, it's in italian, I can translate them if needed)

Nome registro: System
Origine: Microsoft-Windows-WHEA-Logger
Data: 25/09/2011 16:00:28
ID evento: 20
Categoria attività:Nessuna
Livello: Errore
Parole chiave:
Utente: SERVIZIO LOCALE
Descrizione:
Errore hardware irreversibile.

Componente: AMD Northbridge
Origine errore: Eccezione del controllo del computer
Tipo errore: Errore di timeout watchdog HyperTransport
ID processore: 0

Nei dettagli della voce sono disponibili informazioni aggiuntive.
XML evento:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}&q... Read more

A:Win7 64bit - Crashes after installing video card drivers

Are there Windows 7 drivers available for that video card? A driver is a piece of software, if it doesn't interact with the hardware or OS correctly it will crash the system. Take the RMA if they are offering one.
 

Read other 2 answers
RELEVANCY SCORE 61.2

I recently acquired a Pavilion Slimline (s5503w) desktop PC. For whatever reason the hard drive was blanked out when I received it and upon installing Windows 7 64-bit (Ultimate Ed) I've had quite some time locating the proper drivers. Attempting to use the recommended drivers from HP's website resulted in a 9996 error, you don't meet the requirements. Proper recommended installer for that version of windows, but no luck. I've also tried installing the Ethernet and Audio drivers recommended by Nividia's website. A 15.49 package, but though it recognizes the video card it doesn't notice the onboard Ethernet or Audio. Neither of these devices is listed in device manager as far as I can tell either. No typical yellow exclamation mark stating that the driver is missing.

Any help or a point in the right direction would be greatly appreciated.
 

A:Win7 64bit Missing Ethernet/Audio drivers for HP Pavilion Slimline s5503w

Read other 7 answers
RELEVANCY SCORE 58.8

I am looking for anybody who owns a Y580 with Windows 7 and still has the original partition configuration with Rapid Drive (1 TB HDD + 30 GB SSD). I need some information about the partition geometry in this configuration (I am trying to restore a broken MBR). Thanks for any help, Thorsten

Read other answers
RELEVANCY SCORE 56

Hi everyone! That's a long story to tell.I got my laptop from service center, they did dust cleaning and installed an SSD instead of HDD, installed clean win7 x64 on SSD, changed fan.Found out that my nvidia card is not working. After installing drivers and pc reboot, it crashes 1 second after showing me desktop. After that i launch in safe-mode, delete the drivers (or switch nvidia off) and then it is possible to load system properly (but without a video card ofc, i see second video deivce in device manager which is shown as "standard vga video adapter". If i repeat installing drivers for nvidia and reboot in safe mode it is shown as gtx 660m.Must be said, that those guys in service center installed me non official win (which i found out only now), moreover I had win 8.1 as a custom system (later upgraded to win 10) so i suppouse it can be some bios-related issues. Guys in service center told that my videocard is overheated and that's the reason it is not longer functioning, but i dont really trust them after finding out that the system they installed is non-official (also found many similar situations on web which were solved, so i still hope my card is not dead yet, but just sleeping).I already had some issues with video on that notebook: system showed me BSODs and went to avto-repairing state after video drivers update on win 10. Solved it once buy force replacing files in system folder with an older one from the previous driver (do not remember which exactly, s... Read more

Read other answers
RELEVANCY SCORE 56

Hey all, I recently installed an SSD in my old y580 laptop and reinstalled windows 10 but windows is registering the touchpad as a mouse plugged into the PS/2 port. As such, the touchpad inputs are far from optimized and no multi-finger gestures are being recognized (including scrolling  ). The previous HDD recently died but definitely used elan/synaptics drivers. I've had this problem occur on other Lenovo laptops and I've seen others posting about it on here, but never for the y580 and I've never been able to solve it. I've downloaded all of the touchpad drivers on the support page for my serial number but none of them go up to windows 10 and all of them result in an error message that reads that the Realtek Bluetooth Suite isn't compatible with this version of windows. I've also downloaded 15-20 different drivers for windows 10 elan/synaptics touchpads from varying newer lenovo laptops but none of them recognize my touchpad either. Any help would be super appreciated.

Read other answers
RELEVANCY SCORE 56

Hi all;
Currently, i owned a Lenovo Y580 and defnitely want to downgrade from Windows 8 to Windows 7. Here is a couple of questions.

Question 1:
I am using an Intel SSD (solid state drive) 330 series as my main drive (NOT a hard disk) and just wondering if i need the following driver being:
- Intel Rapid Start Technology for Microsoft Windows 7, and
- Lenovo EE Boot Optimizer?

Question 2: The sequence of loading the drivers.
As i need to re-install all the drivers for Windows 7, please kindly advice what are the sequence for me to load the drivers?

Audio: Realtek Audio Driver for Microsoft Windows 7 (64-bit)
BIOS: BIOS Update for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Bluetooth and Modem: Bluetooth Driver (CyberTan/Broadcom, Liteon/Broadcom, Liteon/Atheros) for Microsoft Windows 7 (32-bit, 64-bit) ? IdeaPad Y580
Camera: Camera Driver (Bison, Chicony, AzureWave) for Microsoft Windows 7 (32-bit, 64-bit) ? IdeaPad Y580
Card Reader: Jmirco Card Reader Driver for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Chipset: Intel Chipset Driver for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Chipset: Intel Management Engine Interface for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
General Information: Hotfix for Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Mouse and KeyBoard: TouchPad Driver (Cypress, Synaptics) for Microsoft Windows 7 (32-bit, 64-bit) ? IdeaPad Y580
Networking LAN (Ehternet): Atheros LAN Driver for Mi... Read more

A:Lenovo IdeaPad Y580: Sequence for downloading drivers.

Hi cheesum, Did you look here ? Windows 8 - Downgrade Instructions

Read other 9 answers
RELEVANCY SCORE 55.6

I need to update my Ideapad y580 type 2099 to windows 10, but Microsoft told me it is not compatible.  Microsoft told me that I could probably upgrade it to windows 10 but I need to contact Lenovo to make sure there are available drivers...

Read other answers
RELEVANCY SCORE 54.8

Hi every one,

i have this machine which is causing too much headache for me,

this machine was having Windows XP 64 Bit,
and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to Windows 7 because of some applications just working on Windows XP 64 Bit, but now there is a copy of it,

Any way i'm still having those BSOD crashes,
I have replaced the SSD 500GB hard drive with another regular hard drive with no results,
tried to remove and install nVidia Driver,
tried to install a different version of that driver with no results,
tried to remove McAfee AV and installed Kaspersky Internet security 2013 also no result,

now i have grabbed all the data using SF Tool, and i really hope that u can help me with that issue.

thank you

A:BSOD Winxp 64bit, Win7 Pro 64bit many error codes

- you have Bugcheck 116: VIDEO_TDR_ERROR
you may want to read this first STOP 0x116: VIDEO_TDR_ERROR troubleshooting


Code:
BugCheck 116, {fffffa800acaf010, fffff8800592c134, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8e4134 )
You can either try updating your NVIDIA drivers, or roll back to the most stable release (preferably WHQL'd)

- Uninstall your KIS 2013 as it's causing BSOD

Code:
BugCheck 3B, {c0000005, fffff88003594fa9, fffff88004409740, 0}

Probably caused by : klif.sys ( klif+95fa9 )

Followup: MachineOwner
klif.sys - Driver Reference Table
you can use the tools here Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

-

Code:
fffff880`038cba08 fffff880`04546802Unable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
klim6+0x2802
This is part of KIS 2013, and apparently messing with your TCP/IP connections, which is in conjuction to:

Code:
fffff880`038cb9d8 fffff880`05b4784fUnable to load image \SystemRoot\system32\DRIVERS\yk62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Modu... Read more

Read other 3 answers
RELEVANCY SCORE 53.2

Hi all,

I want to update the drivers for my GTX260 graphics card.
I downloaded the appropriate driver for my OS, Vista Home premium 64 bit (OEM):
Driver: 182.06_geforce_winvista_64bit_english_whgl.
But when I try to run the driver application I get the following error:

"The version of this file is not compatible with the version of Windows you're running.Check your computer's system information to see wether you need an x86(32-bit) or x64 (64-bit) version of the program, and then contact your software publisher".

I have the same problem with 64bit NVidia networkcontrollers.

Is this a known problem or am I doing something wrong?

thanks

stefan

System: Intel Core2 Quad Q9550 2.83GHz, 8GB RAM, Geforce GTX260, Asus P5N-D (nForce 750ichipset)
Windows Vista Home Premium 64 bit SP1 (OEM)

A:Unable to install 64bit NVidia drivers on Vista 64bit

I was just wondering if this could be just an installer problem.
The filesize of 182.06_geforce_winvista_64bit_english_whql is just 22kb.
I noticed on another site (64bit and x64) they have a download of the same driver that is a 100 MB.

Is anyone familiar with start64.com? Can I safely download the NVidia drivers
from there?

And do I really need to install 64bit versions of the driver or can I just as well install the 32 bit version of the same driver (even though my OS is 64 bit) ???

Any help would be much appreciated!

stefan

Read other 6 answers
RELEVANCY SCORE 53.2

how transfer data from win7 64bit to win xp 64bit?
I searched on google but not found anything, no software. I also tried WET 7xp-64bit but not working.

A:how transfer data from win7 64bit to win xp 64bit?

As you are moving the data in the reverse order to most people I am doubtful whether you will find specific software so I would connect the two computers by Team Viewer and use the file transfer facility.

Read other 1 answers
RELEVANCY SCORE 53.2

The two Win7 laptops see each other but, when I try to Homegroup with the Vista laptop I get an error "The RPC server is Unavailable"..did a search on here as well as the net and couldnt find any surefire solution or one thats understandable

Read other answers
RELEVANCY SCORE 52.8

I just bought a ThinkPad T400, and 8GB DDR3 upgrade kit. After first log on, I realized the Windows 7 is 32bit. How can I upgrade to Ultimate x64 instead?

Thanks for your help.

A:Win7 32bit Home Premium to Win7 64bit Ultimate: Possible without Clean

I think you have to Wipe and reinstall. You can't go from 32bit to 64bit over the top of the 32bit.

Read other 9 answers
RELEVANCY SCORE 52.8

Hey,

I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.

- Any ideas how I can get the 64bit version?

- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?

- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?

Thanks for your advice.

A:Reinstall Win7 32bit to Win7 64bit /backup disc content

Camo15, Welcome to SevenForums
The first two questions call Digital River about a refund and reorder. Have heard that some have had success with that. No need to un activate however if you decide to try to use that Key again then you will have to call MS and talk to them to make it work on another pc if that is your intent. Good luck to you and enjoy!

Read other 1 answers
RELEVANCY SCORE 52.8

I have two 500 GB HDDs, and I installed Windows 7 64bit on one, and 32 bit on the other. When im in my 64 bit OS, I can't access my 32 bit HDD. When im in the 32 bit OS I CAN access the 64bit HDD.
From 32 bit I can access
32bit HDD
64bit HDD

From 64 bit OS i can access
64bit HDD
Why is this?
 

A:Problem with Hard Disk after dualbooting Win7 32bit with Win7 64bit

Read other 7 answers
RELEVANCY SCORE 52.4

Hello

I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)

I sucessfully upgraded from Vista 32 to Win7 32

Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)

Now I would like to go from Win7 32bit to 64bit

When I try and run the Win7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only"
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.

I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Win7 32 was smooth and did require all the extra work of a reinstall.

Can someone help me here?

Thanks

A:Win7 (32bit) to Win7 (64bit) upgrade install error

I believe to go from 32-bit to 64-bit, you will have to boot off the DVD. The installer is a 64 bit application that won't run under 32-bit. Find instructions to create a DVD if you don't already have it.

Good luck!

Read other 1 answers
RELEVANCY SCORE 52.4

Just wondering if it would be possible to backup a Win7 32bit system, install a Win7 64bit system then restore the 32bit to the 64bit system?

Simon

A:Macrium Reflect: Restore Win7 32bit to Win7 64bit?

NO -- a clean install is required to move from one to the other. IF you restore an MR backup over an install, it replaces the entire contents of the partition. So basically, you would be going back to the version that you saved to backup.

Read other 3 answers
RELEVANCY SCORE 52.4

I have a new Toshiba Laptop (Win7 64bit CORE i3). I would like to run (via usb) and old hdd from my desktop which was 32bit Win7.
I have the old hard drive in a SATA enclosure and running it via USB to my laptop. When I attempt to either copy or read the old hard drive I get a write protect error. I have tried
the MS registry changes to remove "write protection" but the registry entry they call for is non existent in my laptop registry.
My last post on this was annotated as solved...but my explanation was weak. I do not want to run this drive as a permanent addition to my system, I just need to copy some files from the old drive to the new one.
If I attempt to use Control Panel/Disk Management it tells me the old drive is not "initialized". Both options to initialize don't work. Please help I have some very important medical records that must be copied from old hdd to new.

A:Cannot read hdd from old desktop Win7 32bit on new laptop Win7 64bit

Have you tried connecting the old hard drive to the old computer using the SATA connection then connecting your laptop to your network before copying the files over?

Read other 4 answers
RELEVANCY SCORE 52.4

Hi all,

Hope all is well. I just purchased a Toshiba Satellite P855-S520 laptop with Windows 7 Home Premium (64-bit), SP1 already installed and would like to upgrade it Windows 7 Ultimate.

I had already purchased a retail version for Win7 Ultimate before (the full version not the upgrade) and would like to use this for the upgrade.

I looked around the forums for some advice and found some very useful stuff but I would appreciate if someone could help with the following. My apologies if the answers were posted already. Must have missed them.

1. I read about the Windows Anytime Upgrade feature. Will AU work with the full Win7 Ultimate retail key or does it specifically work with an upgrade key?

2. If I use the AU and it is successful, will the new Win7 Ultimate key be converted to an OEM version as well? The full-version retail key I have gives me the right to install this to 3 computers. I do not want to lose this right since I may use it for different computers in the future.

3. Is it better to go for AU or a clean install of Win7?

Since I just purchased the laptop, I have no personal data or programs installed so I do not have to worry about losing data. However Toshiba has certain software installed with the laptop. My understanding of a clean install is that everything will be wiped clean and then necessary software e.g. drivers, etc... need to be installed again. On the other hand, once I upgrade to Ultimate perhaps some of this software will becom... Read more

A:Upgrade from Win7 Home Premium 64bit to Win7 Ultimate

What`s the need for the upgrade ? Save your Retail Ultimate for another build. But someone will be along to answer your question.

Read other 8 answers
RELEVANCY SCORE 52.4

Hi folks.

I have searched through the various threads that deal with this topic but have not seen anything that deals with this specifically.

I have a custom built computer I put together last year. I installed Win7 32bit at the time because I didn't want to bite the bullet and reinstall everything. That time has now arrived.

My computer has:

i7 Core 960 2.67GHz
8GB Ram
1TB HDD (Win7 32bit installed)
600GB HDD

I purchased an OEM DVD of Windows 7 Home Premium 64bit and an Intel 180GB SSD drive.

I want to install the SSD drive on the computer and install Win7 64bit OS as a DUAL BOOT. This way I will be able to choose to migrate my applications at my own pace. As I install a 64bit version of my Photoshop CS6 for example, I will delete it in the 32bit OS once I have all my settings, brushes etc. moved over.

Should I ?

1. Install the SSD and get it recognized by the BIOS and the 32bit OS.
2. Boot from the DVD of the 64bit OS and choose the SSD as the location of the installation.
3. Reboot the computer after installation complete

and at that point I should get the dual boot screen?

The above is how I understand the process based on some tutorials I've seen for dual booting XP and Vista. Does this work for Win7 32 and Win7 64?

A:Dual Boot Win7 32bit and Win7 64bit on a second SSD drive

Easy - install the SSD and disconnect all the HDDs. Then install Win7 on the SSD and make the SSD second in the boot sequence (first should be the CD/DVD reader). Then reconnect the HDDs.

When you want to boot from your 32bit system, temporarily change the boot sequence (usually via F12 at power-on).

Read other 9 answers
RELEVANCY SCORE 52

Hi,
I'm presently running Win7 Pro 32bit on an Intel Core2Duo 2.4Ghz 775 socket.

I've just purchased a i5 760 processor, an Intel H55 chipset Mobo, and 8GB of ram.

My copy of Win7 Pro 32bit was acquired through the college I was attending.
I have the installation disk and the license number.

When I reinstall Win7 Pro on my new set up, what do I need to do to make it a 64bit install?

I plan to use to the same installation disk and license number.

thanks
Mitch

A:upgrade from win7 pro 32bit to win7 pro 64bit with same licence

You will need the 64-bit DVD for a clean install
Clean Install Windows 7

Read other 4 answers
RELEVANCY SCORE 52

I am working on a Dell Studio 1745 running Win7 64 Home Premium. I need to run a piece of hardware (Tascam US122) that is incompatiable with the 64bit OS. My plan is to partition the drive and install Win 7 32bit on the new partition so I can run the mentioned hardware. I've done this on another machine (Dual Boot XP and Win 7) and ran into a problems with the bootloader. I learned to install older OS FIRST because of that. I'm wondering if installing Win7 32bit on a current Win7 64bit machine will cause a similar problem with bootloaders? I'd rather not have to mess with the bootloaders, but I really need to run this hardware. And, since this is a Dell, with touchscreen, and most IMPORTANTLY, a friend's computer I want to be 100% sure I'm not going to cause issues I can't fix.

So, again, will installing Win7 32bit on a new partition of a Win7 64bit machine cause problems with the bootloader, or any other foreseeable problems?

Thanks a bunch!

A:Installing Win7 32bit on Win7 64bit machine?

http://tascam.com/content/downloads/products/311/US-122_Win_driver_3_40_notes_E.pdf

This says that the drivers work with 64-bit Vista. Have you tried using the Vista driver?

Driver: http://tascam.com/content/downloads/products/311/US122_Win_3.40f.zip

Read other 10 answers
RELEVANCY SCORE 52

OEM SSD Win7 64 bit on C: I installed a new SSD with Win7 64bit to use as a test drive, but I can't boot to it. I can see the new SSD drive when I am in C:. It is labeled as E: I never gave it a drive letter. Does Win7 issue drive letter sutomatically? When I go into the BIOS at boot up I can't see it. I can boot to it if I remove the power to the C: so it can only boot to the new SSD.

A:Dual Boot issues.. Win7 64 bit & Win7 64bit

Post a snapshot of a full screen Disk Management:

To open Disk Management, press Windows key+r, type diskmgmt.msc and press Enter or click GO. Make it full screen.

See here: How to Use the Snipping Tool in Vista - Vista Forums (says it's for Vista but also works with Win 7).

Once you have the image saved, click on the Paperclip Icon next to the Smiley Icon.
In the Manage Attachments window, click Browse and navigate to where you saved the image and select it.
Click the Upload button.
Close the Manage Attachments window.
Click on the Paperclip Icon again and select the image you uploaded. It will be placed in your post.

Read other 9 answers
RELEVANCY SCORE 52

I have a legally purchased win7 Premium (32bit) CD. I purchased a new desktop that is pre-loaded with win 10 (64bit). I prefer to stay with win7.
So:
Question 1: If I do a clean install of my win 7, will it work properly? At least until win7 support shuts down in 2020.
Question 2: Since the new computer has 64 bit architecture, is it possible to upgrade my win7 (32bit) to (64bit) using anytime upgrade?
A little info: I understand there may be a little loss in performance, but, for my purposes, that would be irrelevant. I just don't like win10.
I'm a senior on fixed income. Had to save for a full year to buy the new desktop and simply cannot afford to purchase a 64bit win7 (if it is even still available)! ...and Don't really want to go the 'pirate' route.
Any simple (layman) advice would be gratefully appreciated.
Oh, one more thing. I have made a backup of the win10...in case I have to go back to it in the future.

I have read many of the similar posts...but they were either confusing or not quite answering my specifics.

Read other answers
RELEVANCY SCORE 52

Hi

I have upgraded my NB550D to Windows7 Home Premium and installed 4Gb RAM.
It's working much better but want to go further and do a _clean install_ of Windows7 Ultimate _64bit_ in order to take full advantage of theupgrade in RAM.

My question is: What do I do about the Toshiba drivers for 64bit? I presume i will need some?

What is the best way to go about the upgrade - any help will be appreciated! :D

A:NB550D - Best way to install Win 7 64bit and 64bit drivers

If you would switch to Win 7 64bit then you will need some Win 7 64bit drivers.
On the Toshiba European driver page I could find some 64bit drivers but it looks like not all Toshiba tools for Win 7 64bit are released.

Drivers for WLan or BT stack can be found here:
http://aps2.toshiba-tro.de/wlan/
http://aps2.toshiba-tro.de/bluetooth/

All other drivers or Toshiba tools like value added package or Face Recognition, Eco Utility and others could be used from other notebook series? for example Satellite C660D or other series like L750D, L755D or C670D
Surely you have to pay attention to the built in graphic chip, LAN or chipset?
Use the drivers which are released for the chips in NB550D

Read other 4 answers
RELEVANCY SCORE 50.8

I am trying to upgrade from Win7 32bit to Win7 64bit. A tech? instalked a new HDD for me and put Win7 64bit on it. I have another drive that has Win7 32bit on it that I would like to put Win7 64bit on. I have the new 64bit cd and can read directions, I just have no directions to tell me how to do it. The HDD I want to install on has been formatted Win7 32bit, however there is nothing on it of value now so I am ready to do this thing. I have read the directions on how to do a clean install but have no way to know if this would be classed as a clean install. I may not be the brightest bulb on the tree but I am very careful. It's been a few years since I've had the hood up on a computer but I do know my way around inside, even know what some of those things are in there. If there is some one out there that can set me on the right road to do this thing I will certainly appreciate it. Thanks DonS

A:upgrade from win7 32bit to Win7 64bit

Hello Don, and welcome to Seven Forums.

Is this going to be installed in another computer, or are you having both hard drives in your current computer to dual boot?

Do you have separate product key number for the second installation?

If it's going to be installed on a separate computer and you have a second key to activate with, then yeah you could do a clean install with it like in the tutorial below.

Clean Install Windows 7

Hope this helps,
Shawn

Read other 5 answers
RELEVANCY SCORE 50.8

I am looking at getting new CPU and don't know which way to go.
Windows7 64x or windows7 32x. My Notebook is Win7 32 can I network together with no problems (well almost no problems)

A:Network 64bit win7 to a 32bit win7

they will network just fine.

Read other 6 answers
RELEVANCY SCORE 49.2

My PC come with vista64bit, may registered it ? by this way I get free Email support on windows & networking PCs in windows FROM MICROSOFT ? including setting up wireless and wired networks via ADSL MODEMS ?

I have dual boot PC [VISTA 32BIT & 64BIT]:
The below hardware does not function in 64bit but no problem at 32bit[drivers in device manager appear with a yellow icon-explanation mark] is needed drivers only ? I must register all products and after registration-success seek for drivers ? I must download drivers [since ethernet card/internet do not work in 64bit] from 32bit, save on HDD and after boot from 64bit, run them ? Is needed restart after each installation, or after all installation is ok ?


problems only in 64bit vista drivers

HP LCD L2208W PROBLEM: THE CLOCK APPEAR OVAL RATHER CIRCUS ETHERNET CARD DO NOT WORKwlan shows problem

A:I have dual boot PC [VISTA 32BIT & 64BIT]---problems only in 64bit vista drivers

Hi Ise,

Yes, it's recommended to restart your operating system after each driver installation.
Please remember to install drivers running them as administrator.

Hope I could help...

Read other 4 answers
RELEVANCY SCORE 49.2

Hello all,

I upgraded my system to Windows 7 32bit (from Vista) back when there was the student discount. And am regretting it now since i work in Photoshop all the time and need more RAM to suppose the work i do. So i'm looking to upgrade my system to the 64bit equivalent of what i already have (Home Premium).
I understand you can't use the Windows Anytime Upgrade for a 32bit to 64 bit upgrade. I also understand you need to do a clean install, which is no problem.

So what my question is, is what product should i buy exactly? Can i get away with an upgrade only? Or do i have to buy the full product?
I still have my Vista CD, so i could re-install the 64bit version of that, then buy the Windows 7 Home Premium 64bit upgrade?
Or is there a simpler way?

Cheers.

A:Win7 HP 32bit - Win7 HP 64bit

Welcome!

You can buy the Upgrade key because you have a previous OS already (Windows 7 32-bit).

You don't need to do anything with Vista, however. You can do a clean install with the upgrade copy. Clean Install with a Upgrade Windows 7 Version

Hope this helps,
~JK

Read other 6 answers