Over 1 million tech questions and answers.

Unplugging Certain USB Drive Causes BSOD

Q: Unplugging Certain USB Drive Causes BSOD

Hi all, I've been having this weird problem and this site looked like a good place to ask about it because of the support I've seen. So wooooo first post~!
Anyway, whenever I unplug one certain flash drive (a Kingston DataTraveller SE9) my laptop bluescreens with the error "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED". I can't figure out why for the life of me! I did, however, figure out that the flash drive is recognized as a local disk and not a removable one. This issue only applies to my laptop, that's it; the drive works perfectly fine on any other computer. I can still read and write to it no problem. Any help at all would be greatly appreciated!

RELEVANCY SCORE 200
Preferred Solution: Unplugging Certain USB Drive Causes BSOD

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Unplugging Certain USB Drive Causes BSOD

Some USB flash drives act like a hard drive which Windows lists as local disk instead of removable. You will notice that when you delete anything on the USB drive labeled local the deleted items go to the recycle bin. On a USB flash drive labeled removable the items are not sent to the recycle bin.
 
Download USBdeview. Run the program Highlight any listing for Kingston DataTravler and press the red X to remove. Reboot the computer and attach the Kingston again. Do you get the error?
 
http://www.nirsoft.net/utils/usb_devices_view.html

Read other 2 answers
RELEVANCY SCORE 64.8

Lately I've been getting BSODs whenever I unplug my Seagate GoFlex Pro portable external hard drive from my Esata port on my Dell Studio 14 laptop.

Even after I "safely remove hardware" and unplug the drive, a couple minutes later the BSOD shows up.

I even have the hard drive policies set to "Quick Removal" and and the crash still happens.

Something else that may or may not be related. The laptop has also just completely rebooted without any warning screens or apparent reason at times.

I have attached the 8 .dmp files generated in the last month.

Any advice is much appreciated. Thanks.

A:BSOD after unplugging ESATA external drive

Could you try another external hardware, iPad, iPhone, MP3 player, etc... and try doing the safely remove hardware. If it doesn't cause BSOD, then it there is a fault with your Seagate External HDD.

Update your Intel Matrix Storage Driver (Intel Rapid Technology) - here

Code:
iaStor.sys Fri Jun 05 13:53:40 2009
Update... something Broadcom (likely your Ethernet) - here

Code:
k57nd60a.sys Sun Jun 07 19:36:34 2009
Update your CD/DVD software

Code:
PxHlpa64.sys Wed Jun 24 11:16:35 2009
Update your Realtek HD Audio Function Driver - here

Code:
RTKVHD64.sys Thu Jul 02 21:42:36 2009
Regards...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {ffffffffffffffd0, 2, 1, fffff80002e916e0}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 9 answers
RELEVANCY SCORE 64.8

Hi, i always get BSOD after unplugging eSata drive which is shared over network. BSOD happens always 5-10 minutes after i unplugging eSata drive. Before i shared into network, BSOD never happen. I tried removing all the sharing, but BSOD still occurs. even it will happen when i only "safely remove device" from windows while not physically unplugging the device. Changed into "Quick Removal" but also didnt help.

below are from Who Crash report:

computer name:
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 6371704832 total
VM: 2147352576, free: 1917075456




--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 20/6/2013 2:28:42 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\062013-15178-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C00)
Bugcheck code: 0xA (0x28, 0x2, 0x0, 0xFFFFF80002360682)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: ... Read more

A:BSOD 5-10 mins after unplugging eSata drive

attached dump files

Read other 8 answers
RELEVANCY SCORE 52

It's the weirdest thing.. If I disconnect the ethernet plug from the computer, it will blue screen. Every time.

Based on the blue screen info and the searches I have done on the error, it seems there is something wrong with the Nvidia drivers? I have went to every resource I could to make sure all drivers are up to date.. but nothing seems to be working.

I have been trying to troubleshoot this for a while.. but I kept giving up. I am turning to the fourms for help since I can come up with no solution.

Here are the computer specs - required files are attached. Please let me know if I need to provide anything else. Thanks in advance!

Specs
- Installed: Windows 7 Home Premium 64-bit
- Originally: Windows Vista 64-bit
- Windows Vista came on the system, but it came with free Windows 7 upgrade discs, so it was upgraded.

- System is just over 2 years old
- Windows 7 installed just over a year ago

A:BSOD when unplugging ethernet

Your attachment does not include the crash reports. It only includes the executable for getting the crash reports. Please follow the http://www.sevenforums.com/crashes-d...tructions.html closer to supply us with the correct files so we may better assist you. Thank you.

Read other 5 answers
RELEVANCY SCORE 52

Hello
I am using windows 7 64bit system.
for some reason, after im unpluging my TP-LINK usb device, a BSOD appears
it happens every time im doing it.
(TP LINK WN821N v3)

i have to say it happens only with the TP LINK device, if im unplugging the mouse/keyboard USB
everything is ok...

*added dm log collector info

thanks!

A:BSOD after unplugging USB(TP link)

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_YONI-PC-Wed_12_24_2014_181604_53.zip\122114-33602-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02c53000 PsLoadedModuleList = 0xfffff800`02e96890
Debug session time: Sun Dec 21 12:38:21.238 2014 (UTC - 5:00)
System Uptime: 0 days 0:22:05.051
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
......
Unable to load image \SystemRoot\system32\DRIVERS\athurx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 52

EDIT:uploaded correct zip
My problems all started a few days ago after inadvertently unplugging my mouse from the computer. Since then I have had a handful of bsod.
I have run memtest and it came back negative. I have also run chkdsk. This is the result of that test
Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
141568 file records processed. File verification completed.
1976 large file records processed. 0 bad file records processed. 2 EA records processed. 60 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
194782 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
141568 file SDs/SIDs processed. Cleaning up 897 unused index entries from index $SII of file 0x9.
Cleaning up 897 unused index entries from index $SDH of file 0x9.
Cleaning up 897 unused security descriptors.
Security descriptor verification completed.
2660... Read more

A:Several BSOD after unplugging USB mouse.

AVG IDS Application Activity Monitor Driver is causing the BSODs here.

Code:
fffff880`06f994c8 fffff880`02d6261aUnable to load image avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
avgidsdrivera+0x1861a
Description here: Driver Reference Table - avgidsdrivera.sys

Uninstall AVG using AVG Remover. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Do some Disc checks.
Reseat the sata and power.

Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Post screenshot of HDDs using CrystalDiskInfo - Software - Crystal Dew World
Let us know the results.
___________________________________________________________________________
BSOD ANALYSIS:

Code:
BugCheck 3B, {c0000005, fffff80003745552, fffff88006f99770, 0}

Probably caused by : ntkrnlmp.exe ( nt!CmpKcbCacheLookup+492 )

Followup: MachineOwner
---------------------------------------------------------------------------
BugChe... Read more

Read other 1 answers
RELEVANCY SCORE 52

Hi, I have been using my laptop with windows 7 installed for a while. Whenever I unplug my USB mouse, I receive a blue screen and windows says that it will restart.

I have the dump file, and I can attach it to this post.

Thanks for everyone's help.

A:BSOD unplugging USB mouse

There is a lot of info missing needed to analyse your issue:

Please follow these instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 8 answers
RELEVANCY SCORE 51.6

Hey all. Sorry if this question has really obvious solution but I've been bashing my head against this for a few hours this afternoon and am getting nowhere.

I have downloaded the Win7 RC1 ISO and "burnt" it onto a 16GB OCZ Throttle eSATA / USB drive (exactly as in the SevenForums tutorial). I can boot from this drive and install Windows with no problem.

But... I believe the 200MB system partition is somehow being placed on the flash drive, because once I disconnect it and attempt to boot, I get the standard "DISK BOOT FAILURE..." message.

I've followed the suggestions on the "How to avoid 200MB hidden system partition" page (i.e., pre-create the desired partitions on the installation drive rather than installing to unallocated space), but I'm still getting the problem.

The "Windows might create additional partitions..." dialog box popped up once, on my first installation attempt - and I did foolishly click "OK" to it. It hasn't appeared since for me to click "Cancel" to, however much I try deleting and remaking partitions

Has anything changed in RC1 regarding the system partition? Is it more persistent in creating it than it was with the Beta? If anyone could give me some tips I would be very grateful indeed Thanks!

A:No boot after unplugging setup drive

The 100MB partition is for Repair purposes and should automatically be a part of the installation hard disk (even though it's an alltogether seperate partition).

You may want to check to see what disk the partition has been assigned to, run Computer Management from the start menu search box. See the screenshot and you'll notice that each disk is broken up into partitions (see highlight for Disk 0).

As for changing this option i'll look more closely into it for you

Read other 6 answers
RELEVANCY SCORE 51.6

I'm using Windows 7

Last night I was installing a new video card in my computer. The power supply was unplugged and I unplugged my E:/ drive so the I could have more room to move the video card around. When I booted my computer up it went to a black check disk screen which read similar to:

Checking file system on E:
The type of the file system is NTFS
Volume Label is New Volume.
One of your disks needs to be checked for consistency. You may cancel... etc

Chkdsk is verifying files stage 1 of 3

Then it listed each file and said the file is unreadable. such as 1 of 180000 is unreadable etc etc for each up to 184000 or w/e the number was.

After this I ran cmd and did chkdsk /r e:
Doing this was incredibly slow. I left the PC on overnight and when I woke up it was at stage 2/5, 10% completed and then stopped. Sorry I didn't screen shot the process but several times it said it was repairing corrupted files and at the end it said 'null' and then went back to the command prompt and nothing seemed to change.

Currently when I boot up my computer the E drive is sometimes visible and sometimes not under My Computer. It says 0 of 0 data stored and when clicking on the drive it says

E:/ is not accessible. The file or directory is corrupted and unreadable.

Previously Under Disk Management the Drive said that it had 0/0 GB storage but now it is showing the correct amount 0/932 GB. Well not entirely correct because I have about 30-50 gigs of games, pictures and v... Read more

A:E:/ Hard drive not recognized after unplugging it.

Read other 16 answers
RELEVANCY SCORE 51.6

Hi, I recently installed Windows 10 and have been experiencing frequent BSOD ever since. I get them when I put my computer on sleep when I leave my desk or when it goes to sleep automatically. It was also happening when I unplug my USB splitter (which was not a problem in Windows 7). I can avoid the USB problem by unplugging devices one by one, but the other issue is a real problem.

I also have an SD card and almost always use an additional monitor (with the latest drivers), if that's helpful.

Thanks

Read other answers
RELEVANCY SCORE 51.6

Been posting my problem in somebody's closed thread. My bad.

So, here my problem in my very own new thread.

PC slows down, then locks up, then does the BSOD thing. Sometimes with very few things open. (email and a magazine reader) Sometimes with lots of things open. (powerpoint, email, Bible study software, video editor, youtube downloader, etc)

If I've done it right, the zipped dump file is attached.

Here are the system specs.CPU: Intel Core i7-2600K CPU @ 3.4GHz
Motherboard: ASUS TeK Computer INC. P8P67 PRO
BIOS: BIOS Date: 02/05/10 19:13:52 Ver: 08.00.10
Total Memory: 16.00 GB Usable 15.98 GB
HDD: (1)OCZ-VERTEX3 (2)SAMSUBG HD204UI (3)HP Photosmart 8200 USB Device (4)Lexar Jump Drive (5)Seagate FreeAgent GoFlex (6)WD My Book 1140 USB Device (7)WD My Book 1140 USB Device
Sound Card: (1)Realtek High Definition Audio (2) USB Audio Device (3, 4, 5 and 7)NVIDIA High Definition Audio (6)Dazzle DVC100 Audio Device
Graphics Card: NVIDIA GeForce GTX 560Ti
OS: Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
Thanks for help.

A:Can only recover from BSOD by unplugging all USB devices

There are no dump files in your upload mate, they will be located in C:\windows\minidump folder have a look
Check this out Dump Files - Configure Windows to Create on BSOD

Read other 9 answers
RELEVANCY SCORE 51.6

I recently started playing WoW again after almost a year, and now my computer has suddenly started getting bluescreens when I play. It has also sometimes got bluescreens when I unplug my Line 6 UX2 soundcard, which has been going on for a while. I have never got bluescreens when I play WoW until now. So I would like to get some help analyzing what's wrong. My computer has also since I installed this version of Windows 7 occasionally shut down or rebooted randomly without even giving me a bluescreen. I don't know if this can be fixed, but if you can help me with that too, it would be great.

I've got Windows 7 Home Premium 32-bit. It's not the original OS installed on my computer, I used Windows XP Professional 32-bit as my first OS and then the Windows 7 Beta before upgrading to this version. It's an OEM-version, I got it installed with my current HDD when I bought it. The age of my hardware is almost exactly three years, and I've used this OS and my current HDD for about one and a half years.

Would be very grateful if you could help me! Thanks!
JanneRoos

A:BSOD playing WoW or unplugging soundcard

  
Quote: Originally Posted by JanneRoos


I recently started playing WoW again after almost a year, and now my computer has suddenly started getting bluescreens when I play. It has also sometimes got bluescreens when I unplug my Line 6 UX2 soundcard, which has been going on for a while. I have never got bluescreens when I play WoW until now. So I would like to get some help analyzing what's wrong. My computer has also since I installed this version of Windows 7 occasionally shut down or rebooted randomly without even giving me a bluescreen. I don't know if this can be fixed, but if you can help me with that too, it would be great.

I've got Windows 7 Home Premium 32-bit. It's not the original OS installed on my computer, I used Windows XP Professional 32-bit as my first OS and then the Windows 7 Beta before upgrading to this version. It's an OEM-version, I got it installed with my current HDD when I bought it. The age of my hardware is almost exactly three years, and I've used this OS and my current HDD for about one and a half years.

Would be very grateful if you could help me! Thanks!
JanneRoos


JanneRoos hi and welcome
Several problems here

1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause. Yours 2004

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll dow... Read more

Read other 1 answers
RELEVANCY SCORE 51.6

Windows 7 x64 pro?
- the original installed OS on the system? yes

- OEM = came pre-installed on system

- What is the age of system (hardware)? 2.5 yrs
- What is the age of OS installation 2.5 yrs (have you re-installed the OS?-NO)
======================================================
Twice today when debugging network issue, I unplugged ethernet cable from router and got BSODs. I ultimately swapped out the router to get network back up.

I have lost network connection almost daily, and cannot disable/enable the adapter. Must reboot to fix... and reboot takes 10-15 minutes before shutdown.

FWIW I am also having right-click Win explorer issues as well. Don't know if any of these are related.

Many thanks

A:BSOD when unplugging ethernet cable

All of the Driver power state crashes were related to theCitrix Network Enhancer Miniport or Cisco VPN client. Yours is from 2008. Update to something win 7 compliant.
Other old drivers

Code:
tifsfilt.sys 8/29/2007 8:37:29 AM fffff880`05fa8000 fffff880`05fbf000 0x00017000 0x46d56889
timntr.sys 8/29/2007 8:38:23 AM fffff880`01a7d000 fffff880`01b2d000 0x000b0000 0x46d568bf
tdrpman.sys 11/12/2007 9:36:33 AM fffff880`01cdb000 fffff880`01d6f000 0x00094000 0x473856e1
snapman.sys 11/22/2007 4:19:33 AM fffff880`01d77000 fffff880`01db2000 0x0003b000 0x47453b95
dne64x.sys 11/10/2008 9:01:24 PM fffff880`051ad000 fffff880`051d9000 0x0002c000 0x4918d964
SABI.sys 5/28/2009 2:38:02 AM fffff880`030bf000 fffff880`030c9000 0x0000a000 0x4a1e314a
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


-... Read more

Read other 1 answers
RELEVANCY SCORE 51.6

Hello,

I hope this hasnt been reposted. i tried searching but couldnt really come up with anything new to try.

here is what i have.
Dell Inspiron 9300
OS XP SP3 Media Center Edition
there was a BSOD error that came up one day while unplugging the AC power from the laptop to inorder to move the laptop. restart the machine on battery power. no problem. plug the power back in BAM BSOD. restart with power ac. no problem. Unplug. BSOD. the file in question on the BSOD came out to tosrfusb.sys. i researched this it turns out to be some sort of driver issue with the bluetooth device that toshiba makes on this laptop.
i but in the xp disk and ran SFC /scannow from CMD.
rebooted and the issue went away.

please see attached txt for BSOD screen view i used from Hiren's boot CD.



now i get a dialog box that says. the sutsem recovered from a serious error. with these codes in the box.
BCCode : 100000d3 BCP1 : BA310804 BCP2 : 00000007 BCP3 : 00000000
BCP4 : 80527F30 OSVer : 5_1_2600 SP : 3_0 Product : 256_1




the system seems stable but this box still pops up from time to time.

any other suggestions?

A:BSOD while unplugging power chord.

Please follow these to get us the files we need

http://www.techsupportforum.com/foru...ta-452654.html

Read other 5 answers
RELEVANCY SCORE 51.6

Basically it just gives a BSOD every time i unplug the usb.

I have the latest beta drivers downloaded from windows update.

I have a wired control and the xplorer guitar (gh2), both works perfectly, the only trouble is when i unplug.

The BSOD indicates something like irql less or equal 0x000000a

Help please,

BTW i cant upgrade the driver because it gives the BSOD when disabling it to do the upgrade

A:BSOD When unplugging xbox 360 accesories

Maybe you have to use the tray icon for removing devices safely, before you can physically unplug it? Did you try that?

Or reboot with it removed, then update the driver.

Read other 4 answers
RELEVANCY SCORE 51.2

I'm working on a friends OLDER pc.. P133, 48mb,1.2gb, WIN95. I suspected memory failure because of several BSOD screens. Using memtest86, it was confirmed. I pulled 2 of 4 memory chips out. In order to get at them, I had to pull the cd and IDE cables from mb. I powered up pc, without re-connecting the 2 cables (duh), and of course wouldn't boot. so I powered down, re-connected cables, and now system will not recognize hard drive. The bios will not auto-detect, and even if I enter User-defined values for hard drive, it still will not detect. I changed to new cables, still nothing. When I boot up, system tells me HARD DISK FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. Inserting Startup diskette, I get msg "no drives found, aborting installation", then goes back to A:. Any ideas?
 

A:NO Hard drive detected after unplugging cables

Read other 14 answers
RELEVANCY SCORE 51.2

I use Win XP with SP3. I bought a Western Digital external drive to store photos on.

Yesterday when I unplugged the USB cable, the computer rebooted of it's own accord, and now that USB port doesn't work (the power cable was plugged in). I'm pretty sure i have done this before without issues. I don't recall having any instructions about which plug to disconnect, or connect first, when using the drive.

Any advice much appreciated. The adjacent USB is working still.

Thanks.
 

A:advice re unplugging external hard drive

Read other 12 answers
RELEVANCY SCORE 51.2

Hi, I notice that when my computer is in sleep mode, I can unplug the external hard drive and the computer will power on again. I never had this issue with Windows 7. Right now I have Windows 8 Pro 64-bit.

Is there any way for me to disable this feature so that I can unplug the external hard drive without turning the computer back on again?

Thanks

A:Unplugging an External Drive Powers on the Computer

still having the issue, anyone know how to change this?

Thanks

Read other 10 answers
RELEVANCY SCORE 50.8

Hi,

Since some days I have a problem on my computer. A BSOD appears whenever I want to remove my mouse, or uninstall its driver (I thought maybe it could help), or even disabling the mouse.

Can you help me ? I ran "DM log collector v1.3" before posting this.
Here it is : DRAGONCYBORGPC-06_03_2015_190845,58.zip

I tried everything I could think of but it doesn't seem enough to solve the problem.
By the way, my mouse is a "Saitek Cyborg R.A.T 7", bought in 2010.

Thank you for your help.

Best regards,
Geoffrey R.

A:BSOD when unplugging usb mouse, or trying uninstall driver

Disable all startup items. Your Intel Mouse driver is the culprit: Driver Reference Table - imsevent.sys
Uninstall Asus bloatware from your system.
Uninstall TAP-Win32 Adapter V9 or OpenVPN driver or COMODO whichever you have.
Disable nVidia Streaming Kernel Service in services.msc

Code:
tmpE908.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmpE908.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8894.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8894.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8AFA.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8AFA.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8F20.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8F20.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8BE5.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8BE5.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

npf.sys Fri Jun 25 18:50:58 2010 (4C24DE72)

npf.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is ... Read more

Read other 22 answers
RELEVANCY SCORE 50.8

I've been dealing with this problem for a while now and just googled it but the fix I saw was for Vista 64bit and I'm not sure if it'll work for the 32bit as well.

Basically I unplug my USB mouse (I usually turn off my screen too) and within minutes my comp has blue screened. The Vista 64bit fix just said remove the update KB973879 but when I searched my updates I couldn't find that.

Thanks for any help with this

A:Unplugging USB mouse causes BSOD (Vista 32bit)

Welcome
For the best help, please post this information. I will look at it, shortly, after I return home
Blue Screen of Death (BSOD) Posting Instructions

Read other 4 answers
RELEVANCY SCORE 50.8

Hi guys,

I just bought an Intel NUC D34010WYKH and installed Windows 7 x64 and all Intel drivers needed. I want to connect to that Computer via Windows Remote, so I don't need a monitor connected.
But every time I disconnect the screen a bsod occurs. I attached the necessary files for you in a zip. Could you please take a look at these?
I could not note down the message because I had no monitor connected and the system restarts immediately so there was no time to plug in the cable again. I hope it's all in the zip.

Thank you so much in advance!
muffn

A:BSOD after unplugging HDMI-Cable from Intel NUC

From what i could research; it appears the bsod is pointing to your onboard graphics driver. I would go to your motherboard manufacturers site and download the latest drivers. Then; uninstall the drivers that currently exist; and reinstall the drivers that you downloaded. Try that out and see what happens. Post back if no results.

Read other 4 answers
RELEVANCY SCORE 50.8

Computer crashes when unplugging my mouse, Steelseries Kinzu V2, usually when Google Chrome is open. I recently reset windows and the problem did not show up for a few days but now it crashes. The info from the diagnostic tool is attached. My guess is that some driver is causing issues with chrome.

SUJAYMB-Mon_08_29_2016_200749_60.zip

Read other answers
RELEVANCY SCORE 50.8

Hello, I've noticed that my computer crashes everytime i unplug or i plug in and USB drive. Today I bought a new USB mouse and when I connected it no crashes were seen, but when my pc installed the last driver, the BSoD appeared once again. I'm using Win7 64b and I really don't know what can I do, I've tried everything like uninstalling all USB drivers and recreate the INFCACHE.1 file, but still nothing. What can I do to solve this?
Thanks in advance.

A:BSoD when plugging/unplugging USB and when installing USB drivers

1) Does it happen with all usb devices or only the mouse?
 
2) Does it happen with all usb ports?
 
3) Does it happen in safe mode?
 
4) Look in device manager - are there any yellow or red symblos?
 
5) Download and install the newest chipset driver for your system. If it's a laptop, get it from the website of your laptop manufacturer. If it's a desktop, you can get it from either the desktop or the mobo manufacturer's website.
 
6) Look for a bios update.

Read other 5 answers
RELEVANCY SCORE 50.8

Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn?t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.

Currently I am seeing these BSODs:


I am getting one when just trying to start and run windows I am getting a BSOD about memory management.


If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys.
Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.


Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.

I was able to run a mem test on it at one point and it said everything was fine. I would appreciate any help or advice you can give me since I can?t even get to a command prompt or safe mode.

A:Multiple BSODs after unplugging and plugging in flash drive.

If you would like for us to be able to effectively help you, we will need you to follow the Blue Screen of Death (BSOD) Posting Instructions Please be sure to do each step, as outlined in the tutorial. By doing this, we will have the necessary information to help you.

Read other 1 answers
RELEVANCY SCORE 50.4

hi,
after i turned the computer off by unplugging the power cable by mistake while playing Counter-Strike: Source (which made windows turn off unexpectedly) i keep getting random BSOD. TY

INFO:

1-never had a bsod for 2 years.

Question:

1-will re-installing windows fix it ?

A:BSOD after unplugging power cable by mistake while playing Css.

Security App

Crashes indicate Avira being a possible cause. Remove Avira and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials and Malwarebytes, both recommended from a strict BSOD perspective.

Microsoft Security Essentials, Free antivirus for windows
Malwarebytes Anti-Malware Free



   Information
DO NOT start the free trial of MalwareBytes. Deselect the option when prompted.

Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - Disk Check
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Read other 9 answers
RELEVANCY SCORE 50

Every time I unplug this Wheel from the USB port I get a BSOD. I do not have the error codes but i have downloaded and ran the SF Diagnostic tool. I am using windows Ultimate x64 SP1 on a custom built system that is several yrs old now. I've never noticed this problem before this week.

A:BSOD when unplugging Logitech Wheel (model number E-UK12)

Activation
Please post this report before we begin: Windows Genuine and Activation Issue Posting Instructions

Read other 1 answers
RELEVANCY SCORE 49.2

Hi Experts, I have a serious problem using my W520 since a few month. When plugging in or unpluggingthe power cable the system directly jumps into Blue Screen (BSOD). I used a small tool to extract the basic dump message: RESOURCE_NOW_OWNED I installed the newest versions of LENOVO Solution Center, LENOVO Energy Management, ...I did an BIOS update longer ago, but I'm not sure, if there was a time-based relation to my problems. The BSOD occurs when: * Laptop started with power cable => Power unplugged* Laptop started without power cable => Power plugged* Laptop in sleep mode => Power plugged and Laptop started again lifting screen* Bring Laptop in sleep mode => Power plugged Does anybode had this problem. Before every meeting now I have to shutdown and restartthe engine... I'm not sure, if the Windows repair CD could detect and repair such a problem.Thanks in advanceKlaus Wegener

Read other answers
RELEVANCY SCORE 49.2

I got a new case for a friends computer today, and set about removing motherboard/hardware from old case to install in new machine. While unplugging the ribbon cable connected to the 3.5 inch floppy drive from the motherboard, I ran into dificulties getting it to disconnect. I must have tugged a little too hard because the plastic surrounding the pins on the motherboard broke off on one side, though the pins did not seem to be ruined. I thought, "Well that sucked, hope it turns out ok." I did notice that 1 pin was not present on the motherboard like 3 pins in, but hoped maybe that was standard. Now after installing everything into the new case, and booting up the 3.5 inch drive is not being recognized. I don't know for certain if the drive was being recognized before. It is not recognized in cmos. Probably stupid question, but is it certain that I broke the connection on the motherboard?
 

A:Solved: Broke plastic around 3.5 inch drive ribbon cable while unplugging from motherboard!?

Read other 8 answers
RELEVANCY SCORE 38.8

Good Day Everyone..

I am having this problem.. well on standby the local area network shows it has network 2 but when I opened any browser or use an application that uses the internet it goes unplugged, enable and then identifying... as the results I will get a message of no internet connection in the browser but after that it will stay on network 2 message again like its fine...

I tried to ping google.com -t and it seems it doesn't go unplugged, enable and identifying.. it is pinging well..

nothing changes even if I change the settings in the speed & duplex.

I also tried ipconfig /release and /renew.. /flushdns

it is like this for 3 days now then I am rebooting the canopy yesterday.. changing some settings to forced and it kinda worked.. though it goes unplugged, enabled and identifying again.. once per hour I think... then this morning this problem is back again....

edit: ok I just noticed now when I use ipconfig /all
the media state are disconnected even though it says network 2 in the local area network.. also the enabled word... in the window is blinking...
 

A:Keeps on unplugging

Read other 9 answers
RELEVANCY SCORE 38.8

Even after unplugging my PC from my TV and back into my monitor (which I got high FPS on) my FPS is significantly lower than normal and my PC just crashed while playing CSGO. Any help would be great

A:Low FPS after unplugging PC from TV

Install this little tool and run it.
Top of tool, click Analyze.
scroll down and retrieve the information.

Copy / paste in your next reply.

WhoCrashed 5.03
Comprehensible crash dump analysis tool
for Windows 8.1/8/7/Vista/XP/2012/2008/2003 (x86 and x64)
Flashorn.

Read other 3 answers
RELEVANCY SCORE 38.4

I've recently acquired a digital camera, and have been testing snaps then putting them into the PC for editing. When I remove the lead, I get the "Unsafe Removal Of Device" window pop up warning me about not stopping the device properly. Now this has never caused me any issues when unplugging any USB hardware.

So my question is, can the warning be disabled totally? Every time I unplug the camera the window pops up and wants to place its icon in the system tray. It's starting to get on my nerves!

Thanks in advance
 

A:Unplugging USB Devices

Alan,This problem can occur because of a logic error in the code for the Usbhub.sys file. Leave it plugged in so that when you download the latest service pack from Microsoft it will be picked up, and the proper SP will be downloaded. Have a good day.
 

Read other 2 answers
RELEVANCY SCORE 38.4

Getting ready to do the install on my new SSD with some trepidation. I have Raptors in Raid 0 right now and would like to simply unplug them, set the BIOS to AHCI and use the 0 port for the SSD experiment/potential fiasco. What I hope to be able to do if the SSD doesn't like me, is to unplug it, set the BIOS back to Raid, plug in the Raptors and pretend the whole thing never happened. Does this stand a chance of working?

A:Plugging and Unplugging!

I wouldnt unplug the raptor raid - if you use intel raid (the one i'm sure of and probably similar, or the same for others) when you enable raid in the bios it also enables AHCI - so you should be good to go with testing the ssd drive - just unplugging a raid array can be very hard to set up again - i did it years ago and it was a miracle i got it back up and going again (that included reinstalling the OS) so not recommended - it also depends what options are available in the raid rom (i think its called) which you set it up in before you install the OS. From memory, which is bad, the problem was it couldnt recognise one or both the drives.
It depends on your motherboard I guess but for mind it should be ok - running raid and using the same controller to use a ssd drive in AHCI mode - but treat this as my opinion - you should be able to find information on your motherboards site, or intel etc's, site. Or wait for more replies as Im uncertain and more repies means more suggestions.
If it has 2 controllers eg intel and jmicron use the JMICRON if it supports AHCI to be on the safe side.

Read other 3 answers
RELEVANCY SCORE 38.4

Hi,

I wonder what'd happen if I unplug the desktop tower cord from the power surge or electric outlet? Will I lose what I have in tower? I unplugged the desktop monitor cord from the power surge several times and nothing was lost, but I am not sure about the tower cord. The reason is because I need to move the table around in the room and need to unplug the cords. I am sure nothing will be lost if unplugging tower cord from the power surge or outlet because the table needs to be moved around in the room, something else like moving out of the house, etc if you know what I mean.

Also, what would happen if unplugging the cords from the desktop monitor and tower themselves, not from power surge/outlet? Would everything be lost? Much thanks.

A:Unplugging cords

Save everything, then turn everything off, using the approved procedure and then you can unplug.
As always, your important stuff should always be backed up. An unexpected improper shut down, and stuff can be lost.
Stuff can be lost for other reasons, too.

Read other 3 answers
RELEVANCY SCORE 38.4

I borrowed my sisters camera for a trip, while i was copying my videos and pictures onto my computer, the cord got unplugged (wrapped around the chair)
and now, on the camera, i cant Take pictures, cant record Video... when i go to preview mode, it says "MEMORY REQUIRE FORMAT" then it flashes to 'no data in internal memory'

i checked the SD card, and there was nothing on that, and i need to fix this problem... HELP

the type of camera is a Centrios DSC-314 3.1 megapixel

(also... dunno why, but when i go to picture mode it says 2X zoom instead of 4)

I dont really want to go into windows and format it through there, and i cant find a selection in the camera settings to format it... can anyone help me?
 

A:Unplugging camera

Read other 8 answers
RELEVANCY SCORE 38.4

Don't have a router and want to use the modem with an Xbox. Should I shut down the computer before removing the modem cable and before plugging it back in when I'm done with the Xbox?

Thanks.

A:Unplugging Modem from PC

You don't have to, but it might not pick up the network when you replug the computer back in.

Read other 2 answers
RELEVANCY SCORE 38.4

So recently, my Y40-80 started to shut down immediately after i unplug the power source. At first, i figured it's due to my battery, so i got a new one and got rid of the old one. But the problem still exists. I've called in to Lenovo support and they said my warranty doesn't cover this, so it'll be due to charge, which i think is ridiculous since if it's a hardware failure, i do not see why i should be charged just because i don't have the original battery. Anyways, i've tried reformatting and that did not work. Anyone out there could help me please? Appreciate it!

A:Y40-80 shuts down upon unplugging

Hi rx24race , 
 
Welcome to the Community Forums. 
 
Would the new battery be a direct purchase from Lenovo or declared genuine replacement Lenovo battery ?
Within the warranty coverage would be the original parts that came with the machine.
 
As you mentioned that with a new battery you are still having the same issue but since this would be a charging issue , it is yet to be investigated if it was the systemboard or battery itself is the fault. 
 
Option that I suggest is to have it taken perhaps to service provider like best buy that can check with a certified compatible battery and have them assist you on having it serviced or to call in directly using the same case number you were provided.
 
Update us on how it would work best for your situattion.
 
Regards 

Read other 1 answers
RELEVANCY SCORE 38.4

I gave up printing w/ this wireless computer when I read the posts and it said it was because the computerwent to sleep.  I bought the regular cord but it does the same thing!  I have to unplug it every time I want to printand the printer has to go thru the whole process of setting up again.  Thank you,Sue

Read other answers
RELEVANCY SCORE 38.4

Hello,
Recently, I've been having problems with my HP cd-writer. The cd-writer automatically plugs and unplugs itself... even when I'm not using it!! I want to know what's going on and how to fix this problem. Thanks
 

A:My CD-writer keeps unplugging itself...

Read other 12 answers
RELEVANCY SCORE 38

So this bug seems to only happen about 50% of the time when I unplug USB devices from my computer. When I play certain games I have to unplug my racing wheel and flight sticks and doing so sometimes causes my computer to start beeping and stuttering. The beeping and stuttering only happens when I either move the mouse or click a button on the mouse so I am wondering if it's got something to do with the mouse but I've had the mouse for a while and have only encountered this bug fairly recently. Anyone heard of this before? Any suggestions as to what I should do?

A:Unplugging USB's causes computer to break

Hi,
Well I doubt it's the mouse
You have a i7 what exactly and also what is your power supply so please fill in the rest of your system spec's and also include which antivirus you use as well as any other third party utility,
Use Clean boot,
Troubleshoot Application Conflicts by Performing a Clean Startup
Click Start and type in the search box,
msconfig
Click on the suggestion on top or hit the Enter key,
Go to the Startup section and take some screen shots for a complete list,
Go to the Services section and on the bottom left Check the box to Hide All Microsoft services,
Repeat the screen shots,
See the links above my signature on how to take and upload screen shots here,
Cheers.

Read other 1 answers
RELEVANCY SCORE 38

When I close the lid of my computer, it makes the alert noise as if you unplugged a device. When I open the lid, it makes the alert noise as if you plugged in a new device. The screen takes a few seconds to turn on, and all of my windows which were open will be resized, and all of my desktop icons are rearranged.Happens every time I open or close the lid, and it's been about a week now.About two months ago, I actually sent this in to Lenovo for some repair from a drop, and they replaced just some plastic parts of the shell and the keyboard. It worked fine when I got it back, and once the screen is on, it continues to work fine. I'm mentioning this because I don't think the screen is becoming physically unplugged, it looks like it is in top shape after the repairs. Any thoughts?-Matt

Read other answers
RELEVANCY SCORE 38

I have had trouble shutting down a computer I am building. It goes through the motions then says its okay to turn off your computer now. All the fans are still running and I assume by the okay to turn off your computer now message which has a windows logo on it, the HD is still spinning. Hitting the power buttons just causes the computer to restart. There is no way to shut this computer down.

If I am unable to resolve this issue, how bad is it to turn off the computer by unplugging it? What I would really be doing is adding a power strip with an on/off button to shut the computer down.

Thanks
 

A:Unplugging a running computer

Read other 10 answers
RELEVANCY SCORE 38

Is this a good idea? My fan is making all kinds of noise, I have already bought a replacement card from newegg.com, so the issue is only valid for a few days.

If I unplug the fan, will my card/system be ok?
 

A:Unplugging the fan on a GeForce FX 5200

Not a good idea.

If it has a fan it probably means it produces a lot of heat. The heatsink alone might be okay if you don't do anything GPU intensive, but you'll probably encounter overheating problems during gaming.
 

Read other 9 answers
RELEVANCY SCORE 38

Game runs fine when charger is connected but poor performance when not.To disable some obvious power saver functions probably causing the issue, I set battery mode to 'High Performance'.Also I have instead of auto, selected to use Nvidia graphics instead of Intel of course.Don't really know what power saver options I'm missing to disable.

Read other answers
RELEVANCY SCORE 38

Stop: c000021a {Fatal System Error} The Session Manager Initialization system process terminated unexpectedly with a status of 0xc0000189 (0x00000000 0x00000000) The system has been shut down.

That was the first time i got any message. I have a systemax computer and am on windows xp sp3, but after a friend came in from out of town to visit, i noticed him on my pc and thought nothing of it. Then when i would use it, it would just cut OFF as if the power source was being removed, not the actual shutdown process. But i would be able to cut it back on, however, usually right after logging in or as i try to open a program, it cuts off again. I kept cutting it back on and tried a program from microcenter called 'system mechanic'. it said i had 95 registry errors and it fixed everything....or so i thought. I used my pc again happily for a whole 2 hours then, it cut off again. then I couldnt get it back on. when i tried it gave me the above message. It wouldnt even start in safe mode. I thought i ruined my pc, but then i remembered that when i leave it alone until after midnight, it comes back on.... i left it alone until 6 am this morning, and i insalled a fix it program from MS, i just want to make sure this will actually fix the problem and want to know what caused it, what does that mean? This guy became very upset with me and did a lot of petty things b4 i put him out like unplug my mouse, keyboard, and speakers from pc and broke my ac! and more. Plus i know he is a p... Read more

A:PC just shuts OFF as if someone is unplugging it randomly....HELP!!!!

Hi best to stay away from Registry cleaners - cause more problems than they solve.
Try..
Reboot - tap F8
Choose.
Safe mode with command prompt..
Log on as administrator.
Type.
%systemroot%\system32\restore\rstrui.exe
Press enter>Choose>Launch system restore.
Choose date prior to the problem.

Do you have the original install Cd?
Error message.
http://support.microsoft.com/kb/156669
 

Read other 1 answers
RELEVANCY SCORE 38

Hi,
I recently unplugged my computer from the wall (actually, I unplugged the surge protected power strip from the wall) because I was doing some electrical work and didn't want my computer to see a surge in case I made any mistakes. When I plugged the computer back in, I began to see strange behavior. There seem to be "artifacts", for lack of a better word since I'm not overclocking anything, during startup and after booting. The text is all messed up, showing the wrong letters and symbols, and the asus screen is screwed up too. After booting, there are discolorations and severe misalignments, and the monitor going black and coming back repeatedly. I tried resetting the power strip, plugging the power directly into the wall, and cleaning out the dust in the box.

The problem comes and goes, sometime more sever than others and sometimes all is OK, and I can't figure out what is causing it. All temps are OK (GPU is 42 idle, CPU is 29). Specs are as follows:
Mobo: Asus A8N-SLI
CPU: AMD 3700 San Diego
GPU: EVGA 7800 GT
PSU: Antec Truepower 2.0 550
Mem: 2x512 Corsair XMS
1 DVD drive, 4 hard drives, stock cooling (with 1 extra hard drive fan)
Old Gateway CRT monitor (using DVI-Analog adapter)
No overclocking on CPU or GPU

Right now everything is fine and the Asus PC Probe shows the following voltages, pretty much rock solid :
+12 : 11.84
+5 : 4.945
+3.3 : 3.296
V Core : 1.392

RivaTuner monitor shows all hardware behaving as u... Read more

A:Artifacts? after unplugging computer

(using DVI-Analog adapter)Click to expand...

Hmm check monitorcable first its maybe loosen a bit
 

Read other 9 answers
RELEVANCY SCORE 38

Strange. Won't let me post under Networking but here is my question ...

Is there any harm in unplugging a wireless router every night?
 

A:Unplugging Router Harmful?

No harm at all.

But the best is to enable WPA2 or WPA encryption and use a long complicated key. And if you want to be real secure, change that key every other month.
 

Read other 2 answers