Over 1 million tech questions and answers.

How to Accept VPN connections?

Q: How to Accept VPN connections?

Hi guys,

I'm going crazy here... I am looking for a way to enable VPN connections TO my Windows 7 machine. I cannot seem to find this anywhere.

I know this was kinda hidden on Vista too, but in Win7 I cannot even find it!

Can someone PLEASE point me in the right direction. I'd like to be able to connect via VPN to my home machine when I'm not around, you know - access shared folders, printers and such.

I really hope they put this in the beta and that I am just blind and not seeing it.

RELEVANCY SCORE 200
Preferred Solution: How to Accept VPN connections?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: How to Accept VPN connections?

Quote: Originally Posted by peconi


Hi guys,

I'm going crazy here... I am looking for a way to enable VPN connections TO my Windows 7 machine. I cannot seem to find this anywhere.

I know this was kinda hidden on Vista too, but in Win7 I cannot even find it!

Can someone PLEASE point me in the right direction. I'd like to be able to connect via VPN to my home machine when I'm not around, you know - access shared folders, printers and such.

I really hope they put this in the beta and that I am just blind and not seeing it.


hi open control panel - network and sharing center - change adapter settings
while the window is open press alt and the menu bar will be visible then go file new incoming connection and follow the prompts

cheers brad

Read other 9 answers
RELEVANCY SCORE 59.6

To make a long story short, I'm following this guide to allow my Dreamcast to connect through my computer's broadband connection.

I got through it all fine until I have to create a connection that can accept incoming connections. I go into the new connection wizard but on the screen to set up an incomming connection, upon clicking next, I get the following message (sorry for using putfile):http://putfile.com/pic.php?pic=10/29922373750.jpg&s=x10

I'm assuming it's an XP Home Edition thing, which is what I'm running, but I'm not sure.
 

A:Accept Incoming Connections

Read other 6 answers
RELEVANCY SCORE 58.4

Hi, sometimes while doing something like browsing the web or just playing games, then i try to open a website and it wont connect as if i have no internet.

But i can still continue to stay on Teamspeak 3 and talk to people but if i disconnect from teamspeak i cant re join it.

i can connect to a website on my out of country dedicated server via IP address and it loads fine.


anything that is already connected stays connected like online games and such. but if i try and open a website or login to another game or program it wont allow and act as if i have no internet.

windows 7 64 bit home premium


plz halp!

thnx

A:Windows 7 Wont accept new internet connections.

Sounds like a browser problem. Try doing an AV scan and also scan using Malwarebytes Anti-malware first though.

Read other 5 answers
RELEVANCY SCORE 51.6

Hi,
Since updating to Windows 8.1 Pro 64 bit (latest version), in File Explorer listed under Computer I see my other PC's but I no longer see devices like my Synology NAS etc. All PC's and devices are connected using ethernet cables via switches.

The devices still appear in File Explorer on my other Windows 8.1 Pro 64 bit (latest version) PC under Computer so the problem seems to be on the first PC rather than my Asus router.

I just tried putting the name of the devices (\\diskstation etc) in the address bar of File Explorer and with one of the devices I got error 0x80004005 so I ran the trouble shooter and got this error:-

Problem found
The remote device or resource won't accept the connection               Detected            !
Detailed Information
The device or resource (FOXSAT-HDR) is not set up to accept connections on port "The File and printer sharing (SMB)".

I've tried disabling AVG virus software, Windows Firewall and my Asus Router firewall but it makes no difference
sfc /scannow was OK

The Network Adapter has had the latest driver installed.
I've hunted high and low for a solution, I went through this thread very closely ( https://tinyurl.com/p9gk9sn ) but still no solution ... HELP

Regards
Barry

A:Problem since 8.1 update - The device or resource (PC-NAME) is not set up to accept connections on port "The File and printer sharing (SMB)"

At last I found the cause of my problem, during my Windows Refresh some Windows features were turned off, make sure this is enabled:-

Control Panel / Programs and Features / Turn Windows Features On or Off and make sure SMB 1.0/CIFS File Sharing Support

Read other 4 answers
RELEVANCY SCORE 49.6

I have installed Wamp server and I have created 2 tables in phpmyadmin that are connected via ODBC to an Access database. I have tested it with and another Access
database, which sends test orders to it via a php file.
Now I wish to connect an AI2 android app to localhost to send test orders from this source.

I found a web page which sets out a method to connect an app via the IP address, but when I enter my IP address into Windows Explorer I get the following message.
?The device or resource is not set up to accept connections on port "The World Wide Web service (HTTP)".
I have seen a previous answer that suggests resetting Internet Explorer\Tools\Internet Options\Connections\LAN Settings and checking the ?Automatically
detect settings? box, but on my system this is already checked.
Is there anything else I can do please?
My system is Windows 7 32 bit and I have Microsoft Security Essentials and Microsoft Firewall running for home & private networks.

Read other answers
RELEVANCY SCORE 48.8

Audio jack from laptop only accept the first device introduced and if i want to exchange headphones with speakers the speakers dont work,but if i restart and insert the speakers work very good,please tell me how to solve the problem 

Read other answers
RELEVANCY SCORE 38.8

Hi,

I am running an Afoundry EW1200 Router with a Virgin media Super hub acting as a modem.

Every time the wired connections on the network, a Windows 10 PC and Windows 10 laptop, connect to the internet, all the wireless connections on the 2.4G band can no longer connect to the internet.

Has anyone got any suggestions for why this is happening/ solutions to fix this?

Thanks
 

Read other answers
RELEVANCY SCORE 38

Hi, i have previously made a thread [Topic here: http://www.bleepingcomputer.com/forums/t/572613/uploading-to-random-websites-i-think-im-being-spied-on/ ~ OB] about this problem before being referred to everyone here.
I experience random lag spikes in games and stuff, jump from 100 to 1500 ping or more and it'll hover around the same pings and then eventually die down. I've investigated in tcp view and it shows many, sometimes pages full of "[System Process]" which are untraceable through properties. I have many screenshots on the original thread. These connections really start when I open Firefox or Google Chrome and will open in masses and close in masses. I've had a full red page of closing connections. Please help!
Ps. I will find the thread after I post this but for some reason my history deleted itself.. 
 
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 12-04-2015
Ran by Foley (administrator) on FOLEY-PC on 13-04-2015 00:11:28
Running from C:\Users\Foley\Downloads
Loaded Profiles: Foley (Available profiles: Foley)
Platform: Windows 7 Ultimate Service Pack 1 (X64) OS Language: English (United States)
Internet Explorer Version 11 (Default browser: FF)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be clos... Read more

A:Fluctuating connections in TCPview, connections develop on their own

hi Artkin,
 
Iam shelf life and will try to help. I didnt read that entire thread you linked to, but I will if we continue. If your still concerned about the tcp connections you can post back and we will see if it has anything to do with malware.

Read other 6 answers
RELEVANCY SCORE 38

I have been trying for a while to delete three broadband connections i seem to have made, but not enabled. They are located in the network connections dialog under the broadband heading. On top of this they keep asking me which server to connect to. When I try to delete them, it asks me if i want to send them to the recycle bin, I click yes, and then nothing happens, they don't go anywhere. Any help would be greatful. Thanks.
 

A:can't delete my broadband connections in Network connections

you may have to install the soft wacd and remove it from there. try it
 

Read other 3 answers
RELEVANCY SCORE 36.8

I've had my win7 laptop for about 3 weeks now.  I have an older XP machine upstairs.  I created links to several web folders using the info from my old machine, and everything worked fine.
Today, when I went to open one of my network locations (FTP web hosting), where it normally is under "Computer," there was only a file inside called Target.lnk .  Normally you see the web folder contents. 
I had 2 network locations like this, and both worked fine a week ago, and now show the above behavior.
Additionally, if I try to create a new network location, or map a new network drive, I get an error, "The folder you entered does not appear to be valid. Please choose another."
I know the folder is valid b/c I can navigate to it in my web browsers, and log in with my FTP credentials.
So, what's going on?  I've read that Win7 has issues with web folders, but both locations worked a week ago!
Any help would be appreciated.

-- Mo

Read other answers
RELEVANCY SCORE 36.4

Hello,

I have Windows XP operating system, IE7, dial-up connection. The number of connections per server keeps changing. I believe the appropriate setting is ten but often when I reboot the setting gets changed which results in slower internet downloading speed. How do I keep the setting the same? I also have IE7Pro on my computer and that is set to ten connections per server. Hope you can help me out--Cherise
 

Read other answers
RELEVANCY SCORE 34.4

I have two computers. A laptop and a desktop. My desktop has a wired connection to my router and the internet connection is fine. My laptop uses a wireless connection and this connection is not working. Both connections are through a Linksys WRT54G router. My wireless network's name does not show up as an option to connect to anymore. It seems to have vanished. I have unplugged and reset both my router and modem with no success. Does anyone have any ideas on how to fix my problem?
Thanks for your time in advance.
 

A:Solved: Wired connections work, wireless connections do not work

Read other 9 answers
RELEVANCY SCORE 33.6

I recently changed ISPs and added a Netgear wireless router to the modem. I configured the modem and router useing my PC laptop, and generated a WEP Key with 64-bit encryption. I was able to successfully connect with my WEP Key on my PC and on my TiVo, but my Mac (which is a new MacBook) will not accept my WEP Key, saying there is an error in joining the network.

The dropdown menu in the AirPort window has four choices: (1) WEP Password, (2) WEP 40/128-bit hex, (3) WEP 40/128-bit ASCII and (4) LEAP. I'm assuming that since my WEP key is set to 64-bit encryption, that I should use the first option, which is what I have been trying.

I was able to connect my MacBook to my old wirelss signal, which I have not disconnected it (it's cable-based and runs from a different modem/router; my new ISP is DSL-based), and that signal also has a WEP Key with 64-bit encryption.

I also tried disabling the WEP key encryption for a time, and then I was able to secure a connection to the new signal, but I want to maintain the encryption. Please help.
 

A:Mac Won't Accept WEP Key

Read other 6 answers
RELEVANCY SCORE 33.2

Hi everybody,

it's my first post here and I have a serious problem.

My old laptops motherboard burned, so I stripped the RAM and HDD an threw the rest away. I bought a used Toshiba Satellite Pro without the HDD.

I put the old one into new laptop. But I had set HDD pw on my old laptop. I remember it 100% correct but the new computer does not unlock the drive. It says: HDD Password Invalidate Press any key to continue.

I tried going through Bios but it says "Registered". AndI cant select the Drive, going up/down on the list they just skip this drive.

I also tried booting straight from windows Disc to format and reinstall Windows but it askes HDD password before even booting up the disc.
Any Ideas how I can get rid of password or get the computer to accept it?
eidt: I dont necessarily need the data from the disc. I do lose some valuable pictures but I am happy if I can just format and install new wimdows.
 

A:Failing to accept HDD PW

howdy and welcome. You may want to re-read the rules page, as we will not assist in bypassing passwords.

Please do not ask for assistance with (or ways to bypass) a forgotten or unknown password, personal identification number (PIN) or any other type of access code that may be required on a computer, mobile device or web site. As there is no way to verify the actual situation or intent, no assistance will be provided and any such threads will be closed.Click to expand...

thanks for understanding,

v
 

Read other 1 answers
RELEVANCY SCORE 33.2

Hello,

I have done everything I can think of to allow incoming RDP sessions, but it is not working.

I have checked the box under system properties/remote (Allow Remote Assistance connection to this computer) and I have check the box under McAfee Firewall/ports and system services for port 3389.

I have also temporarily turned off the firewall....no good.

I know that system I am RDP'ing from works because I can get to a Windows XP machine.

Thanks in advance.

A:Will not accept RDP incoming

  
Quote: Originally Posted by mlvogt57


Hello,

I have done everything I can think of to allow incoming RDP sessions, but it is not working.

I have checked the box under system properties/remote (Allow Remote Assistance connection to this computer) and I have check the box under McAfee Firewall/ports and system services for port 3389.

I have also temporarily turned off the firewall....no good.

I know that system I am RDP'ing from works because I can get to a Windows XP machine.

Thanks in advance.



What version of win 7 are you using (starter,home,pro,ultimate)??
ken J

Read other 8 answers
RELEVANCY SCORE 33.2

did a restore and password wont work, cd drive is broken so cant use any recovery cd's. need to know how to bypass password to get to desktop. Can't use cd drive for anything. Cant do full system restore with f11. NEED TO BYPASS THE PASSWORD TO GET ONTO DESKTOP PAGE!

A:Won't accept old password

Visit this link-http://www.mydigitallife.info/2007/05/27/forgot-windows-administrator-password-ways-to-recover-and-reset-password-in-vistaxp20032knt/

But i think you might be still needing a workable Cd drive.I am not sure whether you can boot this software from a USB.

Read other 2 answers
RELEVANCY SCORE 33.2

The following configuration change was requested for this computer's trusted platform module (TPM):Clear TPM.

Read other answers
RELEVANCY SCORE 33.2

I bought a 15inch notebook in November, paying for Microsoft Word ,Home and Student package. It worked okay until January when Word became disabled, I received a message saying my subscription had been cancelled.(I'd paid to have the package permanently). I was advised to type in a product code. I typed in the product code HP had given me but got a message saying code was no good. I phoned up Microsoft. They said the code hadn't been activated by the seller and was of a type only given for trials anyway.I emailed the HP sales consultant. I got a reply which told me to contact technical support: no link, email address or telephone number. I wrote back, telling them to sort it out or at least pass me on to someone who could.After this I received a text telling me the product was going to be collected from me this Wednesday, Feb1. I got an email from the sales consultant implying i'd asked for this. There's some mention of a replacement but I haven't been told when this is going to be.I phoned up today and I could tell the guy speaking to me was giving me a load of guff. he said the product could only be fixed by them collecting it. He said he'd email as to when a replacement would arrive but I knew he was making it up and the email hasn't arrived.They want to collect the laptop on Wednesday February 1. If I let them collect it I've got no idea when a replacement will arrive and they might try to argue there's nothing wrong with the laptop.I've... Read more

Read other answers
RELEVANCY SCORE 33.2

Ok, I've got a dual P3 700 at work that we really can't use in it's current state at work. It's a fiery tower that was meant to be a print server from EFI . They won't even support the hardware on their website. It's got a Tyan Thunderbolt mainboard in it. They used their proprietary BIOS when they built it so you couldn't change the OS. After finally figuring out what mainboard was in there I went to Tyan's website and downloaded their version of the BIOS and flashed it. Now when I try to install 2K, I can partition the drive with no problems but it keeps telling me that I need to choose a windows 2000 compatible partition to install it on. It doesn't give me the option to format the partition in the setup. I am able to go into the recovery console and use the format command to format the partition, but it keeps giving me the same error in the setup. The hard drive is a SCSI IBM running from the onboard SCSI ultra 2. I checked all the BIOS & SCSI BIOS settings and they seem to be correct. I tried downloading the latest SCSI drivers and loading them before the install, but that doesn't make a difference either. I've also tried different partition sizes with no luck. What I don't get is why can I partition the drive and format it (in recovery console), but can't install on it? Can anyone give me any ideas on what to do? Thanks
 

A:Can't get Win 2K to accept partitions

Have you tried formatting with Partition Magic? I use version 8 to partition all custom systems that I build and I love it, it works grate! I have never had a problem using PM8.

Lance
 

Read other 1 answers
RELEVANCY SCORE 33.2

I am running Windows XP Professional, Version 2002, SP3 in a corporate environment. I use IE7 version 7.0.5730.11.

When I try to add a website as a favorite it doesn't "stick". I can see it on my favorites list...but then without any other action from myself it will disappear. Something is deleting them. The weird thing is...not all get deleted. Some stick and some don't, but most don't.

What is going on!??

A:IE7 won't accept new favorites

Welcome to TSF

Seems to be a common issue but no real solution

Is your Favorites folder in the default location:
C:\Documents and Settings\user account name\Favorites ?

Try the procedures in this article:
http://windowsxp.mvps.org/ie/redxorg.htm

Uninstalling /reinstalling IE7 may help. If XP SP3 was installed after IE7,
it should be uninstalled before uninstalling IE7.
IEBlog- IE and Windows XP Service Pack 3:
http://blogs.msdn.com/ie/archive/200...and-xpsp3.aspx

When installing/reinstalling IE7 disable antispyware/antivirus programs and
follow other tips/warnings at http://www.ie-vista.com/known_issues.html

http://groups.google.com/group/micro...e9cbf9da073653

Read other 1 answers
RELEVANCY SCORE 33.2

Can anyone assist with the following?

i Fitted new Asus P5GDC-V Deluxe mobo, board with a P4 3.2 gig processor, the board does post.
However on completing the IDE scan the following message appears.

"An ultra ATA/66 (or faster) drive is connected with a 40-pin IDE cable on the primary channel.
Drive speed is downgraded to ultra ATA/33 mode"

after seeing the message the PC suggests a hardware change has taken place but will not boot from the primary drive,
The correct IDE cable is used (in the correct cofiguration) in the primary IDE slot.
in the BIOS the drive is seen but it appears not recognised?
The boot H/D drive is A seagate Barracuda ATA 1V (model ST38002 1a) 80 GIG.
relitively new with W XP loaded.

If anyone has come across this before i'd appreiciate some guidence.

Regards Libraryman.
 

A:Mobo will not accept my H/D

have you tried with a different IDE Cable?... just asking...
 

Read other 22 answers
RELEVANCY SCORE 33.2

My daughter's HP laptop (windows XP) was running fine. Battery just ran out, she plugged the computer in and now it will not let her log back on (and she is sure she is typing her password correctly). Any suggestions?
 

A:Won't Accept Password

Read other 15 answers
RELEVANCY SCORE 33.2

I just bought some Maxell DVD-R discs which won't work with my Win7 drive.

I've never paid much attention to what I use before, but surprised about this. My other discs that work fine are Memorex DVD+R.

I verified my DVD drivers are up to date.

Please advise.

A:PC won't accept Maxell DVD-R

There have always been different types of DVD RW disks +R and -R being the main ones, check the specs of your Writer to see if you can burn the disks you have. Of course some systems can be temperamental and refuse to accept a certain batch of disks, A certain manufacturer's disks, or even individual disks of a specific batch

Read other 2 answers
RELEVANCY SCORE 33.2

Try as I might, I can't insert a cd in the CD drive.
It has been working and I've tried EVERYTHING that's
on the help line, but really, it doesn't have a cd in
and when I try to put in a cd, it just goes in a bit and
then won't grab and pull it in. Feels like it's butting
against something hard and already in.

This is for a Mac OS X
Version 10.3.5
Processor 1.8 GHz PowerPC G5
 

Read other answers
RELEVANCY SCORE 33.2

TAB 2A7-30HC pad/mobile will not accept the local operator's SIM card Telia. It may be that it is not an approved operator in the list of operators.How do I get an operator on the list. Telia is a large government supplier in Sweden.The unit was bought out side of Sweden.The unit works with other operator s SIM cards but not Telia! Any tips just use is on wifi today

Read other answers
RELEVANCY SCORE 33.2

My new laptop that I had only been using for a few days, suddenly won't accept my password. I KNOW it's the correct password, but it says no. I never set up Password Retrieval, since I only had it for a few days. What do I do?? I absolutely can NOT get on!

A:Won't accept password

sorry, but we cannot help with password issues, per TSF rules.

http://www.techsupportforum.com/rules.php


Quote:




ILLEGAL ACTIVITIES

Users may not post hacks, cracks, or give instruction how to pirate any type of software, or anything similar, in any forum of TSF. We do not condone, support or give instruction on any illegal activity pertaining to computer systems, computer hardware, computer software programs or computer related activities. Included in this group of activities are requests for help to circumvent system admin passwords or Administrator settings on networks. We do understand that the majority of requests may be legitimate, but we do not have the means to discern these from non-legitimate requests.

Read other 2 answers
RELEVANCY SCORE 33.2

Hello,

This is about not being able to accept cookies, I E version 6.

I have changed and re-changed setting in internet options. I put the bar at accept all cookies. I have shut down my firewall and this did not help. I am using Zonealarm.
I have seen this addressed on several news groups and no one seems to have an answer. I have searched the knowledge base and tried several suggestions, no help.

Starting out, I E 6 was working okay, and then it quit accepting cookies. I asked for some knowledge from this forum. It was suggested that I use I E version 5.5.

I have Win98, Pentium II, 233 mhz, 196 megs ram, 32 g hd, plenty of room.

I used a program call IEradicator to remove I E 6. (http:\\www.98lite.net)
This did seem to remove I E from my computer. I ran it twice. I scandisk and defraged, ran regclean, scandisk and defrag again. I installed I E version 5.5. I still can not get this computer to accept cookies. I discovered that the internet options drop down was the same as version 6. This options menu still has a privacy tab included. I donít think that this is part of version 5.5.

I still canít accept cookies.

Does anyone know what to work over, to help me correct this main problem?

I know that I can empty all data and reformat. Might be what has to be. Did not want to do this.
 

A:Cookies, can not accept

Here are two possible ways that may help .

Double check your settings ( close & reopen ) to make sure everthing has been done correctly & the changes have stuck .

--------------------------------------------------------------------------------

http://www.langa.com/newsletters/2002/2002-12-02.htm
Dear Fred: Let me tell you of a simple way I have come up with
for managing cookies. It may not work for everyone, but it
works for me.
In the Internet Options (Security tab), I set both the
Internet zone and the Trusted Sites zone to Medium security.
Then, in the Internet zone, I disallow cookies that are stored
on the computer, while allowing session cookies. In the
Trusted Sites zone, I allow both. Whenever I run into a site
which needs to store a cookie (like eBay, Amazon, cable TV
listings, etc.) I add that site to the Trusted Sites zone. At
the end of the day, I have on the drive those cookies which I
need to keep, and all others are history.
To make this even easier, I use a small application called
Trust Setter, which puts two buttons in the IE toolbar, Add to
Trusted Sites, and Add to Restricted Sites. Get it from
http://www.jasons-toolbox.com/ScriptRepository/ .
Available by right clicking on the unwanted page .

---------------------------------------------------------------------------------

http://www.jasons-toolbox.com/cookiejar.asp
Cookies present a dilemma. On one hand, chances are you want to accept cookies from some sites
(for such functionality as savi... Read more

Read other 3 answers
RELEVANCY SCORE 33.2

Is there ANY product out there that will allow a PC to accept Mac formatted disks (zips, floppys, etc.)?
 

A:PC accept Mac disks?

Chris286 said:

Is there ANY product out there that will allow a PC to accept Mac formatted disks (zips, floppys, etc.)?Click to expand...

http://www.download.com/TransMac/3000-2248_4-10256283.html?tag=lst-0-1
 

Read other 1 answers
RELEVANCY SCORE 33.2

i wonder if you can help a complete novice with a problem i have. until yesterday my laptop which has vista home edition running, worked just fine. i started it up earlier today and i was met by various error messages. the main message was "the service cannot accept control messages at this time" i got this when trying to update my anti virus ( Norton ). i also got it when trying to open up ccleaner and some other windows programmes. some programmes , like "convertx dvd "worked OK , itried to do system restore but got the same message. i started up in safe mode and managed to do system restore, taking my laptop settings back a week. i restarted in normal mode only to be met by more errors " host process for windows services stopped working and was closed " " application layer gateway service stopped working and was closed ", and also the " service cannot accept control messages at this time " i still cant access the programmes i mentioned , i even tried the repair your computer option on my laptop, and the last known good configuration option ,no change. so I'm stuck. anyone any ideas? is it a virus? or is there a solution you can help me with. sorry its a bit long winded, but that's what has happened.
 

A:the service cannot accept...

has anybody any ideas how to solve this. would a complete reset work? if i do it what will i lose? programmes I've loaded? emails? sorry but I'm very new to PCs so any help would be very much appreciate, thanx
 

Read other 1 answers
RELEVANCY SCORE 33.2

My Intel 975xbx (rev. 304) will accept three 1 GB sticks of Corasair XMS memory, but when I put a fourth stick in, I get the three beeps and it won't post. I have tried all four sticks in different combinations, so it isn't a particular module that is "bad". I followed the voltage settings recommended by Corsair and have tried altering them, but I can't get all four to work at the same time. They were all purchased together, by the way. I can't find anything on Intel's site or Corsair's sited about a known problem. Any help would be appreciated.

Thanks,

Bill
 

A:Bad Axe won't accept 4 sticks of ram

Read other 6 answers
RELEVANCY SCORE 33.2

Hello,

By some reason Win7 only wil run with 1 x 2 GB RAM.

First i couldn't install Win7 - i got BSOD wit somthing about VSMRAID.SYS and IRQL NOT EQUAL.
Then I try to remove som hardware, and when I removed one of my to 2 GB RAM, then Win7 was installing perfect.

Afterwods I tryed to inset the second 2 GB RAM again - but then BSoD came again.

What is wrong? Why do Win7 give BSoD?

Win XP was OK with 2 x 2 GB - Why is Win7 not?

RAM: 2 x 2 GB GEIL, PC2-6400, DDR2-800
Mainboard: MSI P45 Zilent/Platinum with the newest BIOS.

Please help me :-)

A:Windows7 only accept 2 GB RAM

Hi,

Welcome to 7 forums

In this regard, i guess the problem is with the 2 GB RAM or the RAM slot. The issue is not with Windows 7.

► Lets say RAM 1 works, RAM 2 caused the issue.

* To find if the defect is with that RAM or the slot, remove the working RAM 1 and place the RAM 2 in that same slot.

* If your Windows works fine, then the problem may be with the other RAM slot. If the RAM 2 causes BSOD now, then the issue is with the RAM. You may have to replace that RAM 2.

* Additionally, you can try interchanging the RAM slots and boot up !.

Hope this helps
*

Read other 9 answers
RELEVANCY SCORE 33.2

My mobo will accept up to PC100 and i have 128 mb of pc100 on it now.Will it accept a stick of pc 133 instead of pc 100.Will it reject it or accept it, and will i have repercussions from it. What would it do etc..
 

A:Will my mobo accept this ram?

More than likely your motherboard will accept it, but it will only run at PC100 speed. And I doubt you will have any problems, just you will not be running the ram at it maximum capacity. If you could give us some more info, like what kind of mobo, ram, etc. you have it would be good.
 

Read other 7 answers
RELEVANCY SCORE 33.2

Hello. I just brought home an HP All in One desktop. I sat and filled it in last night. I just tried to get on it and I can't get past the login screen. I wrote my password down and it won't accept it. It says my name and underneath, it asks for my psswd. My email is wrong. It says **REMOVED**. That's not me. I have spent 3 hours getting # after # from Microsoft and sites to log onto. Not ONE of them helps ant the online chat is worthless. Is anyone out there able to help me? I'm so upset. Thanks. Maggie

Read other answers
RELEVANCY SCORE 33.2

Hi, is it possible to incluse a tick box on a html form which then 'energises' the 'Submit' button?

E.g. I have a form which i want people to read and agree (via a tick-box) to a disclaimer before the submit button on the form is energised.

I do have a vaugue knowlege of Html, but am stumped on this issue.

Thanks, Paul.
 

A:Accept 'Tick-box'

You need something other than HTML to accomplish this. SOme sort of active scripting. I an sure there something that can be done with Java type form validation.
 

Read other 3 answers
RELEVANCY SCORE 33.2

system crashed got it back with Dell support can not upgrade to w8.1
q

Read other answers
RELEVANCY SCORE 33.2

HP DX2450 Microtower. This system comes with HP branded Windows XP install disk and a restore disk(among others). I wanted to perform a repair install on XP. Inserted the HP restore disk, system reported it sees a valid restore disk and ask for the Windows install disk. I put in the HP Windows XP disk, when it got to "install Windows" , I chose "repair an existing XP installation". When it finished installing, it ask for the product ID. I looked on the CD, in the i386 folder/unattend.txt, bottom line is the product ID. When I put in this key, it tells me it's not a valid key. Now I'm stuck. How can this not be a valid ID when it's on the same disk used to install Windows, and what can I do now?

A:Win XP will not accept product key

Often the product key is on a stick attached to the computer.

Read other 5 answers
RELEVANCY SCORE 33.2

What is the highest CPU speed supported by an Abit SD7-533 Motherboard?
 

A:What CPU will this motherboard accept

I would suppose these vague lists are close to the truth http://www.cpu-upgrade.com/mb-ABIT/SD7-533.html but it might support faster P4s with 400 FSB, too.
 

Read other 2 answers
RELEVANCY SCORE 33.2
A:The service cannot accept......

Norton AV is the most "Pain in the B" ...So many bugs and problems ...

No wonder your going Nut.....Use Norton Uninstall tool to remove it ...
Use Avast instead ....IMO.

Read other 1 answers
RELEVANCY SCORE 33.2

I have an ABIT KX7333 board with AWARD Bios/softmenu 3. I am using corsair pc2700 ddr ram and an Athlon xp 1800+. Everytime I go into my BIOS and change anything, namely the memory CAS from 2.5 to 2, or anything with the memory for that matter, it won't boot. I know the memory can run at that rate but it jsut isn't working. Also, I am using an Nvidia GeForce 4 ti 4200 vid card, and I can't change the AGP settings for optimal use. The only thing I can use is the optimum performance defaults, which is not as optimal as I know it can be. I have the latest Bios update, what is the deal here? Any input would be greatly appreciated
 

A:BIOS won't accept changes....?

Possibly insufficient power, I've had the problem in the past while trying to run larger amounts of RAM at higher speeds. I had to go to a 400 watt PS.
 

Read other 1 answers
RELEVANCY SCORE 32.8

This is crazy but my friend's HP crashed and we tried to do a system recovery since HP has the recovery "disks" already installed to no avail, also won't go into safe mode so I did a clean install. I wiped the entire HD using FDISK Created new partition formatted it Ran XP to try to install it and when I get the license agreement it says to hit F8 to agree to it which I do and it does nothing. I can't pass this agreement screen which is very odd. Any ideas? I even did the same steps to another HD that I had laying around that had 100GB this one has 80G it is 1.5 years old when purchased new to test and same thing. I tried installing WIN98 and it works, Win2K won't allow me to accept either. Any ideas how to get XP back?

A:XP User Agreement Won't Let Me Accept?

Hi xxnonamexx to BC.

Does your friend's keyboard have an F-Lock Button? If it does, try pressing that before doing F8. I know on my system (also an HP) that I have to set that F-Lock when I am reformatting or else it doesn't work.

Good luck

Read other 2 answers
RELEVANCY SCORE 32.8

so last christmas i got a dell inspiron 1545 and recently started experiencing problems. i don't know if i downloaded something but for about a month i didn't use my computer because i couldn't find the charger so i couldn't use it. during that time i guess something happened when i found it i was excited but when i turned it on it wouldn't connect to internet i checked the wi-fi , perfect connection. i diagnosed the problem and it said it won't accept the internet access. so i tried restoring it but i don't have a date to where i can restore it to. so i tried doing a chat with a dell support help line and they couldn't do anything because my year- warranty is up and it's not something to where the computers broken, the internet just won't work. is there anyway of fixing this? HELP.. PLEASE!!! :D
~ Kelsey

A:Won't accept internet access

Try Ethernet connection.

Check Dell Support site for wifi driver updates - http://support.dell.com/support/downloads/index.aspx

Read other 1 answers
RELEVANCY SCORE 32.8

my Brand New 15r with 7 pro accepts everyones wireless except my work. we have a static IP address, modem, router, good internet speed.  If i manually install ip addresses, internet is lighting fast, then they don't stay. then computer labors to get to internet, it does after several "resolving host and try again" comments.  Seems as though i need to uncheck something somewhere.  

A:New 15r will not accept work router

It's not uncommon for some work sites to employ a firewall which restricts/limits the effectiveness/use of personal computers on the site.
 
You might check with the IT point of contact for the site.
 
Louis

Read other 3 answers
RELEVANCY SCORE 32.8

Hello, I have a HPDM server setup on a virtual machine. I have about 40 HPt520 thin clients as well. I disabled USB drives on all of the thin clients when I initially imaged them and it appears that I missed a few. I want to disable them for security reasons obviously. I know that I can do this in the registry. I changed the Start value to 4 (disabled) and the changes do not commit in HPDM. I tried using HPDM to create a task and modify the registry directly and this did not work. I also created another task that deploys the registry file on the local drive of the thin client and the executes it as a script with the command prompt. This did not work either. What I suspect is happening is that the thin client is executing the task and then windows overwrites the registry and none of the changes apply. How can I fix this? Thanks! [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\USBSTOR]"Type"=dword:00000001"Start"=dword:00000004"ErrorControl"=dword:00000001"ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\52,00,49,00,56,00,45,00,52,00,53,00,5c,00,55,00,53,00,42,00,53,00,54,00,4f,\00,52,00,2e,00,53,00,59,00,53,00,00,00"DisplayName"="USB Mass Storage Driver""BootFlags"=dword:00000004

Read other answers
RELEVANCY SCORE 32.8

Any help on this is appreciated
This would be the COMMAND to avoid the whole formatting a flash drive or to run a program from an XP machine. Thanks very much

A:Need the CMD for 7 to accept FAT32 files

Can you describe the problem you are having?
Windows 7 fully supports the FAT32 file system.

Read other 2 answers
RELEVANCY SCORE 32.8

Just bought a new laptop Install seemed to be going well until I entered the wrong password for Wireless Network Chose to do a recovery to try to solve that issue. Upon restarting, my password was no longer accepted, although the password hint was still there. Not sure if the problem has to do with the fact that I performed a recovery, or because I somehow entered the wrong password twice during initial setup, or perhaps there's a finite number of password attempts that Windows 7 allows before it locks you out, because I've tried about 200 versions of my password Can anyone help?

A:Windows 7 won't accept my password

Hello Jazzi, and welcome to Seven Forums.

You can use METHOD THREE in the tutorial below to reset your user account password.

Reset User Account Password - Vista Forums

Hope this helps,
Shawn

Read other 6 answers