Over 1 million tech questions and answers.

cannot see harddisk D:/ in my computer...

Q: cannot see harddisk D:/ in my computer...

I install windows RC 7100 this afternoon and amazed by it stunnishing graphic but it seem to have a problem, thats is i cannot see my original local disk (D/) in my computer. i got all my music stored in that partition.
Actually i do a dualboot and have vista ultimate in (C/) and i installed Win 7 in partition (J/). But when i boot into Win 7 it Drive letter change from (J) to (C/)and the original (C/) that stored vista ultimate change to (D/)... And the weird thing is that the original pertition disappear from my computer....

how to make my partition (D/) to be shown on window 7 ?

for information, i didn't installed any OS in this partition, it just stored all my music and picture and some games.

Thank for any kind reply.

RELEVANCY SCORE 200
Preferred Solution: cannot see harddisk D:/ in my computer...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: cannot see harddisk D:/ in my computer...

Read other 16 answers
RELEVANCY SCORE 48.4

Hello all,

I need some advice.

I recently replaced my old harddisk to a new harddisk. The old harddisk has windows xp home and other programs installed.

I did not format the old harddisk, I only took out the old harddisk and replaced it with a new harddisk. I then installed windows xp home to the new harddisk.

While I am installing programs on the new harddisk, I discovered that one of the programs do not allow me to activate the program license because I have previously activated the program on my old windows. I need to do a proper uninstallation to release the license, then I can activate the license of the program in the new harddisk.

My question is, can I take out my current new harddisk, replace it with the old harddisk, boot up as normal into the old harddisk windows, uninstall the program inside the old harddisk, then replace the old hardisk with my new harddisk again.

Will I be able to access the old windows on the old harddisk?
Will it mess up my current windows/programs settings?
Will my current new harddisk windows be able to work as normal after accessing the old harddisk windows?
I thought of accessing the old harddisk as a slave, but I do not know if it is possible to access the old harddisk and do a proper uninstall of the program?
Is there any better way of uninstalling the program on my old harddisk?

Thanks in advance.

A:Accessing Win XP on old harddisk to uninstall programs after installing new harddisk

you have to swap out the drive completely. at no time should you have both hdd plugged in.

repeat, do not run them as master and slave. run each hdd individually at each time only.........

Read other 5 answers
RELEVANCY SCORE 48.4

I have 40GB harddisk and now I am moving to 120GB SATA hardisk. But i want all the data with softwares, plugins and all the windows settings to be transferred in the 120 GB harddisk.

There is any way so that all files and setttings will transferred and I dont have to install everything again.

In my system Windows XP Pro SP1 is installed.
 

A:Transfer data/settings from small harddisk to big harddisk

Read other 6 answers
RELEVANCY SCORE 46

I'm using Windows 7 on my laptop and I have a Seagate 500Gb Portable HD.
I don't when this problem started and how ? Yesterday when i plugged in my Hard Disk on my friends Computer running Windows 7 ,the Harddisk din't opened.On clicking the Folder it said You don't have the permission to open the folder...

But when i plugged in my HD back on my laptop it worked perfectly.But the problem remains same whenever i plug in the drive in another PC/Laptop.

Help me out

A:I can't open my harddisk on another computer !

when you connect HDD to your pc where you have access check your permissions on the HDD.
Properities and open security tab..

Read other 4 answers
RELEVANCY SCORE 46

Hi

i am using PC with operating system, medai centre. just wanted to know how can i check for the harddisk and ram configuration for my pc alongwith other important hardware configuration.
 

A:how to check RAM and harddisk of computer

Start / Run and type this into the field Msinfo32.exe click OK. You can also download this freeware tool, BelArc Advisor, the first in the list here. http://www.snapfiles.com/Freeware/system/fwsysteminfo.html
 

Read other 1 answers
RELEVANCY SCORE 46

One of my computers, that I found in a container in the ministry of defense..., this is not a joke, I actually cleared it with the people working there, and it was ok.

I wanted to change hard disk. What happened then was that the computer does not find the hard disk. When I use the old one it does not allow me to enter administrator rights. i have tried to start the computer on XP disc no luck.

Anyone with skills?

Regards
Eirik
Norwegian trying to express himself abroad, pls be patient

A:Computer can not find harddisk

Is the BIOS set to allow booting from a CD?

Read other 1 answers
RELEVANCY SCORE 45.6

Assume I remove a hard disk from computer/notebook and put in a bootable DVD (with WinPE or Ubuntu) into DVD drive (or USB flash drive into USB flash port).

Can I start the whole computer in this scenario?

Or is a working hard disk required even if I boot the (Win 7 /Ubuntu) OS from DVD/USB flash?

Peter

A:Can I start a computer without harddisk only by DVD/USB flash?

Yes, you can remove the hard drive and boot into a bootable DVD or USB. No problem.

Read other 1 answers
RELEVANCY SCORE 44.8

I usually leave my computer on mostly when I go to bed, but after 20minutes~ the harddisk goes insane and sounds like it's transfering or something, but then it I move the mouse 1 pixel - it stops. (Locked mode, not sleep or hibernate)

Which programs could cause such noise?

I have Avast, MSN, BitTorrent running only.

Any help is appreciated.

A:Harddisk running wild when computer is inactive?

My guess would be that Avast is scanning the system. Many security system use the inactive times for their background scans - which can take quite a while. My Norton does that too.

Read other 11 answers
RELEVANCY SCORE 44.8

Hey folks!
According to my event viewer my computer shuts down on a regular basis due to a damaged block in my harddisk. (I don't know if "block" is an understandable term for it is translated from dutch)

This is more information in bytes.

0000: 03 00 68 00 01 00 b6 00 ..h...?.
0008: 00 00 00 00 07 00 04 c0 .......?
0010: 00 01 00 00 9c 00 00 c0 ....?..?
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 94 d7 4a 01 00 00 00 .??J....
0028: 07 04 00 00 00 00 00 00 ........
0030: ff ff ff ff 01 00 00 00 ????....
0038: 40 00 00 84 02 00 00 00 @..?....
0040: 00 20 0a 12 40 03 20 40 . [email protected] @
0048: 00 00 00 00 14 00 00 00 ........
0050: 00 00 00 00 b0 19 6c 85 ....?.l?
0058: 00 00 00 00 a0 34 72 85 ....?4r?
0060: 02 00 00 00 ca 6b a5 00 ....?k?.
0068: 28 00 00 a5 6b ca 00 01 (..?k?..
0070: 00 00 00 00 00 00 00 00 ........
0078: f0 00 03 00 00 00 00 0b ?.......
0080: 00 00 00 00 00 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........
I dont't know what this means , can anybody translate?

Thanx in advance

A:Computer shutdown due to damaged "block" in harddisk

Get a replacement drive...back up the files that you value to some other media.http://www.hardwaresecrets.com/article/29I think this is a bit inaccurate...bad block errors are more serious, IMO, than bad sectors on a hard drive, they are not the same thing. If one reviews various webpages on this subject...you will find that most, if not all, disagree with my perception.But, in my 13 years of fiddling around with my PCs...I have never been concerned with bad sectors and neither is Windows (bad sectors on a drive do not show up as a hardware problem waiting to happen, bad sectors are not noted in Event Viewer as something to be concerned about).Whereas any situation depicted by Event Viewer or Windows as a "bad block" indicates something requiring immediate attention.Bad sectors are noted during a chkdsk /r and are routinely taken care of by remapping data.A bad block, OTOH, seems to be something Windows feels that a user should be instantly alerted to.If I'm wrong, it won't be the first time .Louis

Read other 1 answers
RELEVANCY SCORE 44.4

Hi, all,

This is my first post on this forum and I'd need a help regarding shared printer. I've already posted this question to another forum, but unfortunately it didn't generate any meaningful replies.

I'm having a problem with shared printer configuration on the remote computers at my work, where I work as computer technician trainee. The core of the problem is a little old computer running on Win98, with printer attached via LPT1. Both computer and printer can be seen from every workstation in a work-group. Since this is an old computer which could use more RAM, I'd like to configure remote computers that print through it to perform spooling jobs on their own hard-disk, rather than sending document over the network to the local computer and letting it spool all the files.

The computer with printer runs on Win98 and when configuring other computers on Win98 to spool locally, I usually trick them during the installation of printer. I install it as local printer on LPT1, and then later simply change the gateway to a network computer (the one in question). This in fact works and forces remote computer to spool documents on their own local disks, thus leaving the resources of remote computer intact

The problem arises when I'm trying to do the same with remote computers running on WinXP. The same trick doesn't work here (OS doesn't even allow the procedure of changing print gateway) and no matter what I try the sending computer stil... Read more

A:Computer won't spool on local harddisk when using shared printer!

I'm sure you probably won't like my answer.

You've been screwing around with this for a month, and $50 worth of RAM would have solved the whole problem???

If the shared printer is really that important, solve the problem correctly! I'm astonished that a business would waste probably thousands of dollars in man hours solving a problem that doesn't deserve a tenth of that expenditure! Hell, a new computer would cost you less than $500-600, have you checked the prices lately?

Please show this message to your boss, if he can't figure out the economics of solving the problem correctly, he's pretty lame!

I've seen many accounts where the same mentality seems to exist, they'll spend tons of productivity to solve a trivial problem that should be solved by upgrading/buying new equipment!
 

Read other 2 answers
RELEVANCY SCORE 34

Hello,

Re: Win98SE - Intel 465 Mhz

The harddisk in my PC is 8 GB of which only 2,56 GB is still available now.
From I similar PC (done away in the meantime) I still have a 8 GB IDE harddisk.
and want to place it in my PC.
Please mind that I have never opened a PC sofar.

a) I don't know to what electronic circuit-cable it must be connected (wondering about serial and parallel)

b) then this second harddisk must somehow be connected to and made visisable to the system (by cables I think; however what cables, new ones or
already present)

When I tried to google this subject I only found items on partitioning etc, not
about how to get and connect a second harddisk inside a PC.
Furthermore I have no idea whether there are special well-known problems
related to having a seond harddisk installed (e.g. very slow system)

Advises will be highly aprreciated.

Best regards,
a.ruiter
 

A:add a second harddisk

This may help http://www.perfectdrivers.com/howto/seconddrive.html
 

Read other 3 answers
RELEVANCY SCORE 34

i have an old hdisk on an old pc.
the disk label shows that is 4+ Gigs
when i try to fdisk and format, only half is available
at fdisk options appears to be only 2+Gigs
wtf?
 

A:only 1/2 of harddisk is there!

Read other 6 answers
RELEVANCY SCORE 34

hi

i have a western digital 160gb caviar blue hd now i want to buy a new one but some questions are bothering me

first is seagate any better than western digital i ask this because 1tb seagate is just slightly expensive than 500gb western digital so should i go for seagate?

second is that if i buy seagate, will it cause any problem to the system having one wd hd and one seagate?

please answer in details would love to hear anything to increase the knowledge

A:help about a new harddisk?

1. you can mix any makes of disks. They are all 'compatibel'.

2. the make does not matter. They are all the same since they all come from the same factories in Thailand. I have a dozen different makes and do not notice any difference.

3. except Seagate - one of those just died on me. The first and only disk that died in my installations.

Read other 6 answers
RELEVANCY SCORE 34

Hi which would be the best free hardrive checking tool that would tell me if something is failing or is dead

A:harddisk

http://www.seagate.com/support/downloads/item/seatools-win-master/
http://www.seagate.com/support/downloads/item/seatools-dos-master/

Read other 7 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

A:Harddisk!

Read other 12 answers
RELEVANCY SCORE 34

I have an 80GB IDE Hitachi HD which was formatted NTFS on my computer running Win 7 Ultimate. My problem is that when connected to my computer via external Sharkoon Drive link USB adapter, it is not shown in Windows Explorer but is shown in Device Manager as USB Device and in Computer Management it is shown as ?Disk 1 ? Not initialized? and when clicking on to initialize, an error shows as ?This device not ready?. Same occurred on another PC running Vista Ultimate. Strangely, when connected to IDE inside PC it works perfectly. Can anyone help please?

ASUS P5GC-MX/1333 MB
500GB sata Hitachi HDD
2GB Ram
3.2GB CPU
Windows 7 Ultimate

A:USB Harddisk

Does the USB adaptor work correctly with any other drive?

Read other 4 answers
RELEVANCY SCORE 34

I have an ultraDMA harddisk from compaq. I hope to know what is the ATA and RPM value of my 20GB drive. Is there some software that I can use to check it?
 

A:Harddisk

The only 20 GB HDD I could find on the Compaq site is 20GB Ultra ATA 100 Hard Drive (7200rpm)
251974-B21

This was at http://www.compaq.com/products/desktops/options/options_storage1.html
That doesn't mean that there aren't more. The way to know, for certai8n, is to open your system up, and get the part number, or full specs from off the HDD case itself.
 

Read other 2 answers
RELEVANCY SCORE 34

Hi!Where can i buy sata cabel to my ideapad y700 because i have ssd but i cant connect hdd harddisk because i dont know where to buy the cabel. I only have ssd m.2 .  Please help me !

Read other answers
RELEVANCY SCORE 34

I am trying to setup the 3rd Hard Disk in my CPU. It doesn't seems to able detect my already formated hard disk. Is it possible to have 3 Hard Disk in 1 CPU? If so, how do should I go about it? Do I need to do anything with the Jumper on the Hard Disk?
 

A:3 HardDisk in 1 CPU

Read other 7 answers
RELEVANCY SCORE 34

Hey can anybody tell me which is the best harddisk drive for which i should go??????????I need atleast 250 gb or more of diskspace so suggest me the best HDD with their latest price ????????Thankyou.
 

A:Best HARDDISK

Get Seagate 500GB SATA-II

125bucks.
 

Read other 23 answers
RELEVANCY SCORE 34

Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off ,when it came back, i can't find the archives on the partition , nor the mp4

also some sound files disappered from the mp4, also files are occupying space whether on the hard disk or the mp4

i tried to show hidden files, but i still can't find the files

so what's wrong ?? , how can i get the files again ??? because the computer shows that they are still occupying space

thanks in advance

Best regards,

A:HardDisk & MP4

  
Quote: Originally Posted by Mitooo


Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off


Hi.

Does that mean you lost power to your computer or drive?







  
Quote: Originally Posted by Mitooo


because the computer shows that they are still occupying space


If you lost power whilst transferring, there is a good chance some of the files will have become corrupt.

Read other 5 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

Read other answers
RELEVANCY SCORE 33.6

i have hitachi 80 gb external usb harddisk. It has two partition yesterday night i am working on it but suddenly i am not able to access my hard disk so i unplugged harddisk.

now when i click on this drive it gave me error "file and directory is corrupted or unreadable" so i format my drive after almost completion it gives error "windows is not able to format this drive".

when i restart my computer and i click on this drive it gives message "this disk drive is not formated do you want to format it now?" it has two partition so when i click on other partition it works ok but this partition has some problem

when i click on this drive it shows me 0 bytes in used space and 0 bytes in free space. Now what to do i also check this drive with check now but no window is open and check now is not started what to do?

my data in this drive is not important can any software help me for this problem
 

A:external usb harddisk

Read other 7 answers
RELEVANCY SCORE 33.6

I have a laptop HDD in an enclosure as an external drive & have had it for about 4 months. It uses usb port. I was using my computer & the hdd was working fine when suddenly as i was downloading something it could not finish dloading because it said the (already written) files could not be detected. Then i disconnected the cable & replugged it & the green light turned on in HDD but it still wasnt detecting it. Then i thought maybe something was wrong or stuck in hdd so i took it out of the enclosure & everything looked fine so i put it back & when i went to plug it in a error showed at lower right of the screen which said that the port hub had a power surge & to disco the hdd & click reset. (Also the green light didnt even turn on this time.) So i did. Then i thought i always used only one end of the usb cable (Double header) so i didnt get why it didnt work but i went ahead & tryed using both heads of the cable & still again said the same thing. I always had enough power so i dont get it. I plugged in my ipod into the usb port & it works good. What should i do?
 

A:HardDisk Problem

Read other 16 answers
RELEVANCY SCORE 33.6

Halo.I have replaced my harddisk after a crashed. Never made a recovey disk. How to get the notebook working again.What to do? Must I buy a new OS for the machine and where to buy?

A:Harddisk crashed

Hello, Thank you for posting in the HP Support forum. If your computer originally came with Windows preinstalled, your computer is eligable to original Windows. You can purchase and use HP Recovery media to restore your PC to factory default condition. HP Recovery media might not work if your new HDD is smaller (with smaller capacity) than the original one >> e.g. original one is 500 GB , new one is 128 GB. Please, post this information:>> your full computer model and PN  >> http://support.hp.com/us-en/document/c00033108>> country where you are and where you bought the PC from  Looking forward to your reply.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi,
I have this external USB hard disk which I am using for over 2 years now. It was working fine and kept properly. Now when I plug-in the hard disk (thrg USB cable) the green light on hard disk appears but my laptop is not recognizing the disk at all. I tried all standard ways and also went thrgs some other posts but nothing helps. Also, I dont see any entry in removable storage under computer management and neither I see any entry in safe removal option for USB.

How do I get my drive back? I am using win xp home and professional (on two different laptops)
 

A:External USB Harddisk

They don't last as long as internal drives... It may just be bad. Have you tried formatting it?
 

Read other 2 answers
RELEVANCY SCORE 33.6

Hi bro, just a question which company's internal hard disk is good and very stable. I have been using seagate for long time, i believe company's reputation has gone.I replaced my 320 gb hdd for several times , even though company gives 5 year warranty but no use.I was replacing my hdd continually and so many times data losses,recently just a weak back my hdd has come from replacement, just with in 5days of time again status of hdd has degraded. I'm really fed off with this hdd(seagate) prior to this same case with 250 gb. So which internal hdd is best(cost effective).

And please let me know that any incompatibility of my system is causing frequent hard-drive failure , I will provide with full specifications of my system. Myself i built this system.

Core2duo E7300
GA-Ep43(gigabyte mobo[no display board])
4gb(2+2) 667mhz
320gb seagate hdd ( 2008 june)
d-link wireless desktop adapter
Nvidia 9800gt of 1gb DDR-3
LgDVDrom
I-ball gaming cabinet with 600watt smps.

Cooling-additional 4 powerful fans and default 3 fans

regards
sandy
 

A:internal harddisk

If it's a computer I advice getting an external hard drive, you can get 1TB for like $40, and internally I'd go with Acer, of all the Acer computers I own, none of the hardware has ever failed. Yet, with HP, the HDD, mintor, CPU, fan, and some other stuff, all broke in less than a year.
 

Read other 2 answers
RELEVANCY SCORE 33.6

I have windows XP professional on a 40GB harddisk, but I can't get it to boot up! I'm sure it has something to do with the MBR. The computer is an old compaq, with a floppy A: drive that does not work!
I'm totally new to this sort of problem, so I'd be really gratefull for clear instructions on how I can get it up and running again.

For example I found a download for a DOS that I can use via the CD drive. However I haven't a clue as to how I can use it to boot up or fix the MBR, if it is indeed possible!

Grateful for any help, advice or suggestions.
 

A:No boot from my harddisk

Read other 11 answers
RELEVANCY SCORE 33.6

Hi, I`m a novice when it comes to computers, so I dont know all
(hardly any) tricks of the trade when it comes to cleaning up my system from unwanted files, doubles, etc.. Ive heard that Windows saves everything that I have done on my computer (all keyboard strokes, all internet surfing, etc.) in hidden files not easily accessed by a normal user. Is this true Is there (preferably) freeware available on the webb that would allow me to permanently erase these files and return the freed disk space for use?
 

A:Harddisk cleanup

Read other 16 answers
RELEVANCY SCORE 33.6

Hallo,
 
my laptop, Compaq presario, crashed 2 days ago.
 
I took of the harddisk and i put another one.
 
I installed the windows home premium again , everything is working perfectly, only the sound.
 
The icon is there down in the toolbare and when i play music or something with sound, i see that there is  little bit of movement , but i hear nothing.
 
No sound comes out, i tried almost everything and still nothing.
 
who can help me please?? you are my last resource.
 
Regards
tanya

A:harddisk crashed

When you say 'everything' what did you try?
Did you try updating the drivers?
Did you make sure the volume is full from the speaker icon in the taskbar?
Did you make sure no sounds are muted when you click on mixer?
Are you using external speakers/headphones?

Read other 17 answers
RELEVANCY SCORE 33.6

i bought an external hard disk its western digital 320gb, i observed data transfer rate of that disk is 30-40mbps only but ability of usb2.0 is 480mbps, how come very less data transfer, is there any way to increase it or any other application to increase it.

help me in resolving
thanking you
sandy
 

A:external harddisk

Transfer rates externally (i.e. USB or Firewire) are recorded in mega bits per second, however ATA and IDE protocols are measured in mega bytes per second. This means 480bp/s translates to 60MB/s (taking into consideration 1 byte = 8 bits). It seems the speeds on external USB drives are bottlenecked at around 40MB/s anyway - so if you're missing out, it won't be by too much.

Speeds also depend on how your external drive (well, inside the enclosure) works and reads the information off the disk. For example, reading from the outer edges of the disk will result in faster transfer rates than if it was reading from the inner part of the disk.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi Guys,
My comp's been having this very wierd problem lately.

My harddisk shuts down automatically.Everything's fine one moment,then suddenly the orange light on the cpu(which shows hdd activity)goes off and the monitor also shuts down(the green power indicator on it turns to orange). Although the green light on the cpu(indicating power supply)still remains on.Now,in this state, even if i try to press the cpu restart button,nothing happens.I have to cut the power supply from the wall socket and then restart the pc.

Now,this situation happens randomly.It's not overheating probably because it can happen anytime after switching the pc on,10 mins or 2 hours.But another thing is that this issue happens only wen i'm watchin a movie saved on disk or playing a game like Counterstrike etc.I can surf the net or listen to music for hours and nothing happens.Even while watching a movie or gaming,it won't happen always. Sometimes several days go by before anything happens,on other days it happens every 5 mins.
I've opened the cabinet and interchanged the power and data cables between my cd-drive and harddisk,to check whether anything's wrong with the cables.But still da same problem.i've even tried using different players to watch the movies(VLC,Media player Classic),but no use.I observed the cpu usage during movie playing and it hovers around 15-20%.

My pc's config is AMD athlon 2400+ xp,256mb ddr,onboarg graphics suspport,samsung 80gb 72... Read more

A:Help: Harddisk shuts down...

Have you checked your hard drive for bab clusters?
Also what kind of PSU do you have?
 

Read other 3 answers
RELEVANCY SCORE 33.6

how can i install xp sp3 on my usbharddisk? i can try this but it give error.

A:os installed on usb harddisk

Your computer must be able to boot from a USB port.

This is a very hard thing to accomplish and it probably should not be attempted by an average user.

More information can be found here.
http://www.ngine.de/index.jsp?pageid=4176

-Coolfreak

Read other 2 answers
RELEVANCY SCORE 33.6

ı seperated my harddisk 4 pieces. but ı dont entire the harddisk pieces with double clicking expect from including windows xp. the error name is
"resycled\boot.com is not a valid application on win32".
if you reply quickly, ı will be

Read other answers
RELEVANCY SCORE 33.6

In my system 40GB normal drive is installed with Windows XP SP1.

Now I am moving to 200GB SATA harddisk. But want to know that there is any way we transfered all the data with OS into the new harddisk so that I dont have to install everything again.

I heard about Ghost software but not clear that they will do this thing properly and Windows XP will detect the new harddisk because if there is any major change in the hardware then it not accept it .

And mostly my harddisk is filled, so how much space these softwares required to make the image.
 

A:ATA to SATA harddisk

The harddrive manufacturer should have a utility program to copy everything from the old HDD to the new one. Check their website.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hello

I'm trying to install a second hard disk into my 5 year old
Pentium 3 550 MHz. My original disk is 30 Gigs, and I'm trying to add a Maxtor 120 Gig harddisk as the secondary one. I dont have the full details right now because my friend tried the installtion for me. However the gist of the problem is this: Both hard disks are appearing on the bootup screen (the screen that first shows up when one restarts), the Maxtor 120 Gig as the slave, and the original 30 Gig as the master. However its not appearing under My Computer. To my knowledge the jumper settings are fine.

FYI I'm using Windows XP so the hard disk should be plug n play.

Can anyone advise?

Thanks
Dan
 

A:cant install harddisk

Read other 14 answers
RELEVANCY SCORE 33.6

My hard disk did not detecting when i connect hard disk to the pc the system will restarts
please anyone can help
 

A:harddisk problem

Remove temporarily the HDD while computer is turned off and unplugged. Does it reboot also?
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi,

I have hitachi 320 Gb Hardisk and it got bad sectors i tried windows chkdsk but its not worked so i am trying to do low level or zero level format .
So i have certain queries please help it to solve them
1.I laptop cd drive is not working so can i use it through usb & how.
2.Does it really solves my bad sectors problem..I have heard that if it stuck in between hadrdisk become useless is it right..???
3.Currently its showing 397 bad sectors on disk surface according to software Hard Disk Sentinel

Operating System Win 7

A:Bad Sectors on Harddisk

Currently its showing 397 bad sectors on disk surface according to software Hard Disk SentinelHi -This program is not one that I am familiar with, but it sounds like many Registry Fixers that show 200 problems, and say" for $50 we can fix these" I would be very careful about believing all that this program is telling you about your system !!The Hungarian or German company behind this program seems to offer very little support to their program, and also seem to want your money -Run chkdsk /r first and see if the report is the same as this HDS program reports to you, as your inbuilt diagnostics are usually better than some 3rd party programs -Method 1: Run As Administrator from shortcutUse this method and type chkdsk /r at the command -Thank You -

Read other 6 answers
RELEVANCY SCORE 33.6

My don't start.I need a recovery cd or usb. On the mean time bought a new harddisk now I need Windows 10.Try to do factory configuration, but nothing. Or simple I can't do that.I have never made a recovery cd. M#: E0K02UAS#: 5CG3254F3L

A:Harddisk problem

If you have previously installed and activated the Windows 10 you can reinstall it without a license key. The hardware id is stored on MS servers and will activate automatically.Use the directions here to "create installation media to use on another pc".https://www.microsoft.com/en-in/software-download/windows10

Read other 1 answers
RELEVANCY SCORE 33.6

Would i be able to connect a 200mb Harddisk to my compter, to copy the contents into an image with Norton Ghost. I have IDE CD CDRW and Hardisk already and would make this disk a temp Seconary slave. My mother board is June 2000 Bios dated im guessing this would auto detect 200mb disk. What Specs do u think 200mb disk would be any any probs which might arise?

Cheers guys
 

A:OLD 200mb HardDisk.

Yes that should work. Just use auto geometry. Mobo's IDE is backwards compatible.

I don't think you would want to keep it on there long after the data was copied off of it, though. Such an old device is just taking up a valuable IDE channel.
 

Read other 2 answers
RELEVANCY SCORE 33.6

I am not sure if this is the correct forum to post this question. If it is not, I apologise in advance. Just as a matter of interest, is it possible to over defragment one's hard drive? Can it maybe corrupt files? I defragment almost everyday, sometimes even twice or more times a day. Thanks.

A:Harddisk Defragmentation.

If you are talking about Windows XP it should tell you there is no point in defragmenting below a certain limit. If it does that don't bother to defrag - you're just wearing out your hard drive for no purpose.
Assuming everything is working perfectly no harm should come from defragmenting when its not needed but in the real world it does increase the chances of corrupting data through either disc error or power glitches. It's a matter of balancing the risks and the benefits.

Read other 3 answers
RELEVANCY SCORE 33.6

my laptop is working fine.But i heard only a sparking type of sound.when i contact the technical person he says that it is a hard disk sound ,and it is normal.so my question is ,is it correct that some noise will be there in laptop hdd.

A:harddisk sound

Dear Customer, Without hearing the sound it is hard to judge but it does not sound like a hard drive from your description. Hard drive noise is usually a rhythmic "click" not a sustained "whirr". That kind of noise comes from a cooling fan. We can test the hard drive in the BIOS. Here is a link to  test the harddrive  HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8)  If  issue remains. and if this is a recent purchase, please contact HP Support again for further assistance. Contact HP Support.You can also Check your warranty Here to verify the warranty status  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 1 answers
RELEVANCY SCORE 33.6

what is best thing to do wen a laptop DAT is suppose to boot asks of harddisk password....and d harddisk is Toshiba mk3265gsx

A:harddisk security

Hi,
Have you set any passwords in BIOS?
Please make sure that you have turned off the 'Hard disk password' option is turned off in BIOS of the laptop.
To reach the settings,
Tap F2 or Del or Esc key to enter the BIOS (The exact key will be displayed while the first screen is shown after your press the power button on laptop.)
Navigate to 'Boot' tab.
Check if there is an option related to 'HDD Password' or 'Ask password on boot'.
In case of 'HDD Password'
Select if and press enter
Choose 'Modify' if available or turn off/Disable.
Enter the current password if asked
Press 'Enter' if asked for new password. (TWICE)

In case of 'Ask password on boot'
Select it and press 'Enter' key.
Select 'Disable'.

If none of above works, Navigate to 'Exit' tab of BIOS (Last tab or option, usually)
Select 'Load defaults' or 'Load default and restart'
Please let me know the exact BIOS name provided by the interface for exact assistance. The name will be similar to APTIO, AMI for Dell, Phoneix etc, mentioned either at top or at bottom center.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi, can I add a second M.2 storage driver to my Lenovo Think Centre M710t?

Read other answers
RELEVANCY SCORE 33.6

I need the harddisk driver to my HP x2 210 G1 detachable tablet. I try to use the SCCM to deploy a new image to my tablet, but I need the driver to the harddisk. I have spoken to a technician at HP Support, and he told me that the harddisk was on the motherboard and that there was no driver available. I find this hard to believe. Can anyone help me to find this driver?

A:Harddisk driver x2 210

I wish I could help with your pxe boot problem. Have you tested that this particular usb adapter works/boot on other PCs? Our tablet is a "system on a chip (SoC)" so the drivers are bundled together as you see on the HP support page. The chipset download contain the emmc driver as well. . Intel does have newer drivers for a few of the devices, you can get these by using something like windows update minitool. I doubt new drivers will fix your issue since it seems to be a pre-OS boot issue.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi, I plan to install a new 40gig harddrive and need some advice...heres my story:

I have a Packard Bell iconnect 1225 and when I got it came preinstalled with Windows Me. For more info on the iconnect click here. When I got it, about three years ago it had a 10gig harddrive with a 1gig partition. If you have a PB you'll know that this is a backup sector which can be launched by booting off a recovery floppy and restores your system back to the way it was when you left the factory. This is really useful and I used it alot back in the Windows Me darkages when it was the best answer to any serious problem and the last time I used it was when I got XP and forgot to download some drivers before installing and had to rollback and then later reinstall. Even though XP is so stable I would still like to keep it and that why I need as much information as possible.
My plan is to go to my local computer store/pc world and ask for a 40gig harddrive to be installed. As the backup (hidden) partition is named D: the new harddrive must be called E: or something else, will this happen by default? I will then use the restore program to go back to Windows Me (Deleting Windows XP and basically cleaning out my system or unwanted rubbish) and then install windows xp again. In the installation I will select that Windows XP to be installed onto the new drive and to format the drive using the NTSC filing system as its better. After its installed I will use XP like normal and should I ever run i... Read more

A:XP Harddisk Advice

A few things. You want a 40gig HD? Buy one and see if that Packard Bell will support it. Have it installed (or do it yourself) and load XP on it. XP has a built in restore function. The one you are used to that came with the PB is a Recovery Disk. If you own a copy of XP, then you shouldn't need to go through all that riga-moroll. If you really want the security of a "fall back" program, then you can purchase a program like GO-BACK (I think Roxio makes it) and it will do the same thing. The filing system you want is the NTFS verus the FAT32 filling system. XP's System Restore feature doesn't always work as it should in that XP may or maynot have made restore points needed to work. Save all the info you want off your old drive to disks and then you can format that drive also in the NTFS mode and use it as a slave drive to your 40 gig.
 

Read other 3 answers