Over 1 million tech questions and answers.

IE6 unable to locate various known www addresses

Q: IE6 unable to locate various known www addresses

Recently i had my hard drive reformatted & since then I cannot access certain www addresses which I know are valid.

I operate XP + Norton.

My XP firewall is switched off in preference to Norton.

I thought it could be a firewall issue & therefore disaled the firewall - no luck.

Can anybody help me please?

Interestingly, I sent teh www address to my Dad to see if he can access - a hyperlink appeared on the sent message & I can then actually access the www address!

I am confused!! Please help.

Many thanks

RELEVANCY SCORE 200
Preferred Solution: IE6 unable to locate various known www addresses

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: IE6 unable to locate various known www addresses

Hi,

You may have an issue with DNS resolution of specific sites. This happens from time to time, and is normally an ISP issue. Let's see this:

Start, Run, CMD

TRACERT <URL of problem site>

<URL of problem site> is the actual URL of the site you're having issues with.

Right click in the command prompt, use Select All, and paste the results into a message here.


Jay.

Read other 8 answers
RELEVANCY SCORE 50.8

Stop: c0000135 (Unable to laocate DLL) The dynamic link library could not be found in the specified path Default.
I am running windows 2000 when i turn on my comp. i get the above message and whe i try to start in safe mode comp. just stops respounding please help
Thnk you
sgts63
 

A:Unable to locate DLL

Do you still have the installation CD that you used to install the OS. If so I would try either doing a repair install of the OS by booting to the CD or go to the recovery console by booting to the cd and run a chkdsk /r and see if it can find and repair any bad sectors of the drive that may have been point to the DLL location.
 

Read other 3 answers
RELEVANCY SCORE 50.8

So, recently my Dad unknowingly downloaded Ascentive Performance Center, not knowing it was Malware. I removed it.. But now everytime I'm on Firefox and I refresh the page, this thing pops up:Click For ScreenshotErm.. A little help please?Thank you,KonamiYotoEDIT: Alright, fixed it. I just have to re-install Firefox. The Malware destroyed the Flash.

A:Unable To Locate..? o_0

Ok thanks for letting us know.

Read other 1 answers
RELEVANCY SCORE 50.4

I play League of Legends http://www.leagueoflegends.com/ and I have for well over a year and I know that my computer can handle. Then the other day Norton was installed onto my computer for safety, since then whenever clicking play on my launcher a message pops up.
"drwtsn32.exe - Unable To Locate Component
This application has failed to start because dbgeng.dll was not found. Re-installing the application may fix this problem."
The same problem happened when I tried to click "open" on Doctor Watson. My DxDiag says everything is fine and I believe something is wrong with that, I don't know what to do, if anyone can help it would be greatly appreciated.



Here's the copy of my DxDiag
------------------
System Information
------------------
Time of this report: 6/1/2011, 17:22:46
Machine name: DEEFAULT
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp.051019-1519)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: W3644
BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
Processor: AMD Sempron(tm) Processor LE-1200, MMX, 3DNow, ~2.1GHz
Memory: 896MB RAM
Page File: 658MB used, 837MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems fou... Read more

A:Unable to Locate Component

Your first move should be to turn on Windows Update and get your system updated. You are still on SP2 which is no longer supported by Microsoft, the Windows Update will get you up to SP3. That alone may cure the problem.

Follow this guide to slipstream your copy of XP with SP3, that can then be used to run the System File Checker which will replace any missing or damaged files.

http://www.helpwithwindows.com/WindowsXP/Slipstreaming_Windows_XP_Service_Pack_3.html

To run the system file checker Click on Start and type sfc /scannow (exactly as written here with the gap) into the search box and hit enter. Follow the prompts and insert the slipstreamed disc when requested.
 

Read other 2 answers
RELEVANCY SCORE 50.4

in windows xp sp2 following error display and startup screen doesnot come.

explorer.exe unable to locate component.
This application has failed to start because normaliz.dll was not found reinstalling the application may fix this problem.

please tell me what to do .

A:Explorer.exe unable to locate

http://www.techsupportforum.com/f10/...ll-195840.html

Read other 1 answers
RELEVANCY SCORE 50.4

I wasn't sure where to post this, but I tried to run one of my games today, and I got a pop-up saying that:

Frozen Throne was unable to locate your CD-ROM drive.
Please make sure your Frozen Throne disc is in your CD-ROM drive, then click on 'Retry'.

I have never gotten this error before, so I right clicked on My Computer > Properties > Hardware > Device Manager. Then under DVD/CD ROM drives is has:

ASUS CD-S480/A5
HP DVD Writer 640c

Next to these names there is an icon which has an exclamation point " ! ".

I right clicked on ASUS CD-S480/A5 , then properties and the device status says:

Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)

I am not sure what this exactly means, but I cannot load any of my games.
Thanks.
 

A:Unable to locate CD-ROM drive.

Read other 8 answers
RELEVANCY SCORE 50.4

I just installed yahoo online protection and i try to run the anti virus scan and this message pops up " this application has failed to start because ISafeIf.dll was not found" What can i do to fix this?
 

A:unable to locate ISafeIf.dll

Read other 9 answers
RELEVANCY SCORE 50.4

Hi, i've realised that i have a keylogger on my system.
There's nothing different with my os in any way, but i know it's there somewhere.

Ad-Aware, Kaspersky, AVG and Anti-Keylogger are all unable to locate the keylogger.

Here's a HijackThis log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:35:37 AM, on 4/20/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\Acer\Empowering Technology\ePerformance\MemCheck.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\system32\SysMonitor.exe
C:\Acer\Empowering Technology\eDataSecurity\eDSloader.exe
C:\Program Files\D-Link\Air Utility\AirCFG.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Kaspersky Lab\Kaspersky Internet Security 7.0\avp.exe
C:\Acer\Empowering Technology\Acer.Empowering.Framework.Launcher.exe
C:\Program Files\Acer WLAN 11g USB Dongle\ZDWlan.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C... Read more

Read other answers
RELEVANCY SCORE 50.4

I am getting this error message "ypager.exe - unable to locate dll"

The detail is as follow:

'The dynamic link library YImage.dll could not be found in the spcified path C:\Program Files\Yahoo!\Messenger;.;C:\WINNT\system32;C:\WINNT\system;C:\WINNT;.;Y:..'

I had uninstalled yahoo messenger a day ago and then I have been getting it when I reboot the pc.

How do I stop it from giving this message?

Is there a file where I go and remove the info manually?

Thank you.

Xander
 

A:ypager.exe - unable to locate dll help!!!!!

Hiyas

Looks like you're using either WinNT or Win2000, so Msconfig is out of the question. Looks like Regedit is the only other option unless you have something like TweakUI loaded.

Click Start -> Run -> Type Regedit -> Then go to HKEY_LOCAL_MACHINE -> Open the Software key -> Scroll down to Microsoft and open it -> Windows -> Current version -> Run. Check what's starting in the Run key, look for your ypager and delete the reg value. That should sort it out hopefully.

Good luck
BW
 

Read other 2 answers
RELEVANCY SCORE 50.4

Hi I am trying to fix a friends comp. The "unable to locate component" window pops up for at least 15 processes. Everyone of them is due to "msegvj.dll" is not found. I searched this dll and didn't get any results. When I am able to get to taskman. it lists these processes as running and consuming mem. I am unable to open just about everything except IE,which surprisingly runs. I can't use sys rest. or any other tools. Please help......

A:Unable to locate component

Are you in safe mode?

Read other 5 answers
RELEVANCY SCORE 50.4

When I start up my computer a window pops up and states: KTKernel unable to locate. what is this file and what does it do and is it important? I just started using DSL and it is not working correctly therefore, I thought maybe it had something to do with this missing file...... thanks for your time.
 

Read other answers
RELEVANCY SCORE 50.4

I am getting this error
-----------
mmc.exe - Unable to Locate component
This application has failed to start because apphelp.dll was not found. Re-installing the application may fix this problem.
----------

whenever i try to open any thing in Administrative tools. Whats causing this problem?
 

Read other answers
RELEVANCY SCORE 50.4

Hi there,

May i ask if there is a problem in my system, virus infection or malware if i experience this:

Every time i start up my system i get this error pop up:

"sistray.exe - Unable To Locate" - This application has failed to start because SiSBase.dll was not found. Reinstalling the application may fix this problem.
Need help, opinions...

Thanks.

Mon

A:sistray.exe - Unable To Locate

What's your OS.

It could be an infection, scan with Malwarebytes and / or SuperAntispyware.

Alternatively, it may just be a video driver problem.
Reinstall / update your SiS drivers.

Read other 7 answers
RELEVANCY SCORE 50.4

I keep having a message pop up saying:

firefox.exe - Unable to Locate Component

This application has failed to start because xpcom_core.dll was not found. Re-installing the application may fix this problem.

I am not very computer literate. What is this message talking about and how can I fix it??

A:Unable to Locate Component Please help!

Welcome to TSF,

Hi,

I would recommend that you follow the steps that it tells you in the error message. [qoute]Re-installing the application may fix this problem.[/quote] Try this first and then see if that fixes the issue.

Cheers!

Read other 1 answers
RELEVANCY SCORE 50.4

i did a virus scan and it found an infected file: msnamqt.dll. i had the program remove the file and restart. now i am getting this error: Unable To Locate Component: This application has failed to start because msnamqt.dll was not found. Re-installing the application may fix this problem. i get this error for just about every application i try and run, the thing is with the exception of i-tunes all of the programs will still run, i just have to click of to this annoying error. how do i fix this problem, other than it being completely annoying for the programs that still run, i need access to i-tunes which i don't have now.

thanks in advance for any help
-Kid Cadaver

ps.
can't find this
msnamqt.dll file anywhere
and googling it returns ZERO results
also i have no system restore points available

A:Unable to Locate Component

Try SFC.http://www.bleepingcomputer.com/forums/t/43051/how-to-use-sfcexe-to-repair-system-files/

Read other 2 answers
RELEVANCY SCORE 50.4

I was browsing the net the other day and window popped up saying that AVG had detected a virus in C:/Documents and Settings and that a scan should be run to get rid of it. I shut down all of my programs and ran the anti-virus to search in C:/Documents and Settings. It came up empty. I then checked for updates, found one, and then restarted AVG and had it scan the whole C drive while I did some housework and showered. Coming back to the computer about an hour later I saw that AVG had "Encountered an unknown error and had to be terminated". Ok I thought, so I restarted the computer and ran AVG again and let it run while doing my homework. Again, it crashed!

Is there something wrong with my virus scan and what else can I do? I will post a HJT log asap.
 

A:Unable to locate virus

Logfile of HijackThis v1.98.2
Scan saved at 8:55:34 PM, on 11/18/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVG6\avgserv.exe
C:\Program Files\Executive Software\DiskeeperWorkstation\DKService.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\Program Files\Grisoft\AVG6\avgcc32.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\HP\HP Software Update\HPWuSchd.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\WINDOWS\Mixer.exe
C:\Program Files\D-Link\Air Utility\AirCFG.exe
C:\Program Files\Alpha Networks\ANIWZCS Service\WZCSLDR.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
C:\Program Files\ATI Multimedia\main\ATIDtct.EXE
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\Program Files\AIM\aim.exe
C:\Program Files\ATI Multimedia\main\ATIMMC.exe
C:\WINDOWS\system32\DllHost.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\DllHost.exe
C:\Program Files\HP\hpcoretech\comp\hpdarc.exe
C:\Documents and Settings\Brian Tran\Desktop\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = ht... Read more

Read other 1 answers
RELEVANCY SCORE 50.4

Had a power crash, since then can't boot to HD. Can boot to floppy or cd drive. Installed a controller card, didn't fix, put in new HD = no effect, new cable = no effect. Any other ideas?
Thanks in advance
 

A:Bios unable to locate HD

Read other 8 answers
RELEVANCY SCORE 50.4

Greetings,

I've recently come across some trojans that were found by Symantec Endpoint Protection and Avira auto-scans. The notifications popped up after I brought my laptop out of hibernation (which is how I normally leave it when unused).

Symantec tells me that cleaning and quarantining was not successful with a handful of the trojans and is located under:

C:\Documents and Settings\All Users\Application Data\Symantec\ ________

but I cannot find them.

I am currently running Firefox 3.6.3

Any help would be greatly appreciated,
Thank you,

Alan

A:Unable to Locate Trojans

Hello,did Avira say they were quarantined?? Do you have these 2 AV's active??C:\Documents and Settings\All Users\Application Data\Symantec\_______ <<---- This is what it shows as a location??Let's gt another opinion...Next run MBAM (MalwareBytes):Please download Malwarebytes Anti-Malware (v1.46) and save it to your desktop.Before you save it rename it to say zztoy.exe alternate download link 1alternate download link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then ... Read more

Read other 5 answers
RELEVANCY SCORE 50.4

My wife uses a Dell Inspiron 1100, running Windows XP. I had installed AVG anti-virus, but somehow it was deleted. When I tried to re-install it I could not. I cannot install or remove any programs. An error box appears upon starting computer which states McciTray app.exe - Unable to locate component. It stated this application failed because urlmon.dll was not found. Re-installing this application may fix this problem. How can I locate the application. What I would really like to is remove all programs and start from scratch using re-installation CD. What do you recommend. Thanks in advance for your help.
 

A:Unable to locate component

Read other 8 answers
RELEVANCY SCORE 50

I have Windows XP Sp2

whe i try to chanhe ip in "Local Area Connection" i got following message
" Network Connetion Folder was unable to retrive the list of network Adapters"

i checked "Services" .Ok working fine

then what 's the problem??
 

A:Unable to locate network connection

1. Click START and then RUN
2. Type "C:\Documents and Settings\All Users\Application
Data\Microsoft\Network\Connections\Pbk", without the quotes.
3. Open the file "rasphone.pbk" and select your connection

Then create a shortcut somewhere
 

Read other 1 answers
RELEVANCY SCORE 50

I have a Dell Inspiron E1501, using Windows XP. I am unable to open my AOL 9.5. There is a persistent bar on my screen that states:

AOLacsd.exe - Unable to Locate Component. This application has failed to start because xpat.dll was not found. Re-installing the application may fix this problem.

What do I do to get my AOL back? Thank you!
 

A:AOLacsd.exe Unable to Locate Component

Read other 7 answers
RELEVANCY SCORE 50

Hello
 
i have a pop  up that has the above heading and says
 
"This application has failed to start because Proxy.dll was not found. Re-installing the application many fix the problem"
 
Can any one help with getting  rid of this.
 
Thanks in advance.

A:svchost.exe - unable to locate component

http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-to-fix-svchostexe-system-error-the-program/65ee7110-4219-42e1-b295-14028d6edffe
 
Louis

Read other 1 answers
RELEVANCY SCORE 50

I believe I accidently uninstalled/delete Soundblaster from computer (Windows ME). Is there any way to re-install? Do not have software, was preloaded.
 

Read other answers
RELEVANCY SCORE 50

my operating system is windows xp sp2 32 bit, these days when i start my computer, i am getting an error as described below
pbuilder.exe- unable to locate component, the application has failed to start because PSPLOG.dll was not found. reinstalling the application may fix the problem. iam unable to download the .exe files,my adobe reader and cc cleaner are not working.recently a teleradiology soft ware was installed in my system through team viewer, i started getting this problem after that. how to fix this problem
 

A:pbuilder.exe- unable to locate component

The one thing i see right from the start is you need to update xp to SP3. sp2 is no longer supported.as to the others it means something got corrupted somewhere and isnt able to work correctly. when you used the cleaner i truly hope a registry cleaner wasnt used as that might be why theres problems.
 

Read other 1 answers
RELEVANCY SCORE 50

Recently, I began experiencing frequent pop-up messages stating that the SSAUTORN.EXE app failed to start because ccL60U.dll was not found. Some Google messages indicate this may be linked to a problem with Norton (I have Norton IS 2008 installed). Any way to get rid of this annoying pop-up?
 

A:SSAUTORN.EXE-Unable to Locate Component

Hi. The short answer is "Yes" get rid of norton there is plenty of freeware out there that does afar better job.
 

Read other 1 answers
RELEVANCY SCORE 50

Does any one know how to fix this?
"This application has failed to start because clL35.dll was not found. Re-installing the applicatiom may fix this problem"
Any suggestions?
Thanks

A:NSCSRVCE.EXE - unable to locate component

NSCSRVCE.EXE is a process belonging to Norton Internet Security Suite
You might try reinstalling it.

Read other 1 answers
RELEVANCY SCORE 50

I've been put on a scavenger hunt this past week in an attempt to get my laptop to at least get to the login page but have come to dead end after dead end. It started off with an "UNMOUNTABLE_BOOT_VOLUME" message followed by 4 hexadecimal numbers, one of which being 0xc0000006. I was able to get past this point by popping in my XP Pro cd and running a repair. Upon rebooting my computer I received a error message that had the header "lsass.exe - Unable to Locate Component" with the message "This application has failed to start because" I was able to access my harddrive and replaced the lsass.exe file with a copy off my father's working computer but it still wouldn't read. Finally I did a repair install of XP and got the same lsass.exe error message on top of the regular setup screen. Since the setup seemed to be active (the screen went through a series of slides explaining how great the new XP is!) the 39 minute setup was still going over 90 minutes after it originally started. When the lsass.exe error box is closed, the computer automatically restarts.

Please help, my computer's warranty expired only a few weeks ago so I haven't been able to get any help from Dell support and I'm really running out of options!
 

A:Unable to Locate Component - lsass.exe

Read other 8 answers
RELEVANCY SCORE 50

Hi,

My wife's laptop keeps coming up with the following error message every restart-

title of message box: "AppleSyncNotifier.exe unable to locate component" and content of message: "This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem

When she asked me to look the screen had frozen, so i forced a shutdown, but on re-start the above appeared. I ran an AVG virus scan and it found and archived a virus, FakeAlert.SGG in the virusvault. The laptop appears to be a bit slower than normal according to my wife, so i'm wondering if there's a residual problem related to the error message?

My wife uses ITunes and i have deleted and reinstalled the programme in case it was the problem, but that hasn't sorted matters out!

Any advice on how to remove the startup error message and sort any residual problems gratefully received.

Many thanks.

A:"AppleSyncNotifier.exe unable to locate component"

Download Autoruns for Windows: http://technet.microsoft.com/en-us/sysinternals/bb963902.aspxNo installation required.Simply unzip Autoruns.zip file, and double click on autoruns.exe file to run the program.Go File>Save, and save it as AutoRuns.txt file to know location.You must select Text from drop-down menu as a file type: Upload the file(s) here: http://www.filedropper.com/Post download link (copy URL: link):

Read other 17 answers
RELEVANCY SCORE 50

Whenever I try and run some programs now, I get the error:

"This application has failed to start because MSCVP70.dll was not found. Re-installing the application may fix this provlem."

Any idea's?

A:Unable To Locate Component - MSVCP70.dll

Which programs cause this error?

You can download MSVCP70.dll from http://www.driverfiles.net/page,dll,show,136.html

There are a few suggestions here regarding .NET and ffdshow that you might want to look at.

Read other 1 answers
RELEVANCY SCORE 50

I am having a devil of a time trying to find a replacement cap for the pointstick on my HP Elitebook 840. The one I have is black, but is so worn out that the nubs are worn off. Can anyone point me to a part number or source of a replacement cap?

A:Unable to Locate Replacement Cap for Pointstick

6 for $15: https://sofpoint.com/store/home.php?cat=5 HP does not assign it a Part Number so you have to buy from 3rd parties such as above.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers
RELEVANCY SCORE 50

Hi, Help required please. I have an Acer 8930g running Windows Vista Home Premium.
Which when I switch it on and after logging in I get a message "SLUI.exe - Unable to Locate Component. This application has failed to start because urlmon.dll was not found. Re-installing the application may fix this problem."
The machine then displays "Preparing your Desktop".
Next the computer displays "Microsoft Windows. Windows Activation Client has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available".
Upon clicking "Close Program" the computer goes back to the loin prompt.

If I try "Safe Mode" after logging in and seeing "Preparing your Desktop" the computer displays "Help and Support was not able to start" followed by a message at the bottom of the screen "i Your user profile was not loaded correctly! You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator"
When I look for "Restore Points" there is only one for today. I presume this is because the computer does not recognise my login.

Any ideas please.

Thanks

Pete

A:SLUI.exe - Unable to Locate Componenet.

Hi Pete and welcome to Vista Forums

Have a look at this Tutorial to see if it helps: The User Profile Service failed the logon. User profile cannot be loaded.

Read other 1 answers
RELEVANCY SCORE 50

Hello,I just did a search for my screensavers,as I have done in the past,from start>search>.scr but no screensaver flies show up.I went to C:\Windows\system 32 but no scr or screensaver folders show.When I type in .scr in search I get a few different results,text docs,and when I click on show more results I get a message saying :
Windows cannot find 'Search:query=.scr.Make sure you typed the name correctly then try again.

My screensavers work,it's just the problem of locating them that is the issue.I used to be able to view them all from search results but now the search is not showing them,nor can I manually find them.

Anyone know what my problem is and how to resolve it?

Thank you!

A:Unable to locate screensaver files

Try using *.scr for your search.

Read other 4 answers
RELEVANCY SCORE 50

Receiving this error message at startup:
"mimboot.exe - Unable to locate component
This application has failed to start because CoreDll.dll was not found. Re-installing the application may fix this problem"

OS: WinXP SP2 Home Ed.

I have searched for the mimeboot.exe file, found it in Windows\Prefetch & MusicMatch. Searched for the missing CoreDll.dll file and only found it in MusicMatch. I don't have a clue as to what application this missing file is suppose to belong to so it can be fixed.

I did have a previous error problem prior to this one (Proxy Error), fixed it and now I get this message at startup. I also used Registery Mechanic two days ago and after doing so is when I got the Proxy Error.

A:mimboot.exe unable to locate CoreDll.dll

Hi there and welcome to TSF.
This is a file used by MusicMatch and doesn't need to run at Startup. Do you have MusicMatch installed?

Read other 9 answers
RELEVANCY SCORE 50

Hi all,

Don't know if any of you can help...

I recently downloaded something but the file didn't save to the usual place. Instead, the file has been saved to a place on my PC which I am finding impossible to locate (the downloading was successfully completed after a short while by-the-way)

According to the program I used to download the file it has been saved to...

C:\Documents and Settings\user\Local Settings\Temporary Internet Files\Content.IE5

(I'm not sure why the file was saved here!)

When I go to C:\Documents and Settings\ I am unable to find the 'User' folder and so cannot goto (or see) the other folders where this file has been saved. The only folder I can see in Documents and Settings is 'All Users'

If any one of you can help I would be most appriciated.

Cheers,

C h r e d g e.
 

A:Unable to locate downloaded file

I'm guessing the folder is hidden, in explorer tried going to 'tools - folder options - View (tab) - and click show hidden files and folders'

You should be able to get there now.
 

Read other 3 answers
RELEVANCY SCORE 50

This was a post from another member with exactly the same problem as I have, but the thread has expired and the posting is closed. Here it is...

Hi there,
I'm trying to get my wireless turned back on after using an Ethernet connection at work. It's a Latitude E5400. The message I'm getting is that the DW WLAN Card is still disabled and to use the DW WLAN Utility to enable it. There is no icon in my notification area and I cannot seem to locate this "Utility". I'm assuming I'm missing a driver or something.

Help???

Dory
 

A:Unable to locate DW WLAN Utility

can we see an ipconifg /all and a device manager screen shot

what windows version do you have
- you should be able to use the windows wireless utility

in device manager> network adapters >- you should be able to right click on the network adapter and enable it
------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot
------------------------------------------------------------------------

------------------------------------------------------------------------
ipconfig /all
If you canno... Read more

Read other 3 answers
RELEVANCY SCORE 50

hi i just got command and conquer 3 when i try to load the game it says this application has failed to start because MSIMG32.dll was not found. i don't know what the problem is plz someone help me

i use windows home vista x64bit

A:unable to locate component cnc3game.dat

Originally Posted by bladezored


hi i just got command and conquer 3 when i try to load the game it says this application has failed to start because MSIMG32.dll was not found. i don't know what the problem is plz someone help me

i use windows home vista x64bit




hmm i download MSIMG32.dll from a driver website and cheeked in the system 32 folder and send that i had one, i still don't understand why it's not working yet. =/

Read other 3 answers
RELEVANCY SCORE 50

I seem to be unable to connect devices via USB and have my Win7 Pro (x64) locate the correct driver for it.

A couple of weeks ago I connected a wireless mouse. I placed the USB receiver into my laptop, I saw the little animated icon in the system tray looking like it was installing something, but after about 20 seconds a bubble told me that driver installation had failed - a driver could not be located.

This morning I connected a headset (headphones & microphone) via USB and got the same result.

In both cases the devices show up under Other devices with a little exclamation mark.

Also, in both cases I could connect the same devices into another laptop (Win7 Ult. x64) and both the mouse and the headset work as expected, but on my laptop the drivers cannot be located.

In the case of the mouse, I found which driver the other laptop had installed for it, located the same on my laptop (it was installed) and manually assigned this driver to the device, but was then told that the device could not be started.

I've placed my system disk back in the drive and asked it to search the disk for drivers, but that doesn't turn up anything either.

Short of re-installing Windows (which I do not want to do), can anyone suggest what might be going wrong?

A:Unable to locate any drivers for my USB devices

Hi awj, what shows in device manager when both are connected ?

Read other 9 answers
RELEVANCY SCORE 50

I have Win 95 with Netscape 4.75 when trying to download from microsofts download site a Netscape dialog box comes on screen with "Netscape is unable to locate the server download.microsoft.com Please check the server name and try again.Anyone know how I can get Netscape to locate the server?Thanks for any help offered.
 

A:Netscape unable to locate server

Assuming you have a good internet connection (meaning it's connecting/downloading from everywhere else ok)... there's nothing you can do about that error. It's Netscape's way of saying the page or file does not exist.

In light of the recent Microsoft "hacker" problems, I'm sure it will work if you go back and try again now. Especially if it was one of Microsoft's direct links. There was a period of 3 days where nobody was able to get anything from any of Microsoft's sites. Should be okay now...

Oh yes, one more word of advice. Microsoft doesn't like it when users go to their site with Netscape. I mean that only IE sees certain download items/buttons in their pages. Perhaps it's their way of feeling superior, or they use certain browser plugins not found in Netscape... so just use IE whenever trying to download anything from Microsoft, especially automatic updates.

[This message has been edited by rh71 (edited 02-02-2001).]
 

Read other 1 answers
RELEVANCY SCORE 50

I see PrivitzeVPN on my connection options. I tried to search for it in my programs but was unable to find it. If anyone could please help me figure out how to delete it from my computer.

A:Unable To Locate PrivitizeVPN Files

Hello Cid19those are strange symptoms but I do not think it has to do with malwareI want you to first go to the computers website and download the drivers for the touchpad and try to reinstall themI need to get some reports to get a base to start from so I need you to run these programs first.-DeFogger-Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will appear Click OKDeFogger may ask you to reboot the machine, if it does - click OKDo not re-enable these drivers until otherwise instructed.-Security Check-Download Security Check by screen317 from here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.A Notepad document should open automatically called checkup.txt; please post the contents of that document.-Download DDS-Please download DDS from one of the links below and save it to your desktop:
Download DDS and save it to your desktop

Link1
Link2
Link3
Double-Click on dds.scr and a command window will appear. This is normal.Shortly after two logs will appear:
DDS.txt Attach.txtA window will open instructing you save & post the logsSave the logs to a convenient place such as your desktopCopy the contents of both logs & post in your next replyinformation and logsIn your next post I need the following

both reports ... Read more

Read other 3 answers
RELEVANCY SCORE 50

When I shutdown my computer and restart, I get this message: "This application has failed to start because PPwebcph.dll was not found. Re-installing the application may fix this problem." I have no idea what that means. Can you help?
 

A:PPWebcap.exe Unable to locate component

I think this relates to your scanner. If you&#8217;ve removed it, it may have left some remnants behind. Reinstall it. If you don&#8217;t want it, uninstall it again through add / remove programs.
 

Read other 1 answers
RELEVANCY SCORE 50

Hello,
 
I have been struggling for a week trying to get my father in laws laptop working again. It is on Vista, 64bit. Upon start up it gets the following error. logonui.exe unable to locate component  Winmm.dll is missing. When I click OK it continues to boot but it can't authenticate anyone so a lot of programs won't start. It boots into safe mode with no apparent errors. I tried copying a Winmm.dll and re-registering it but that failed. Here is the log from Hijack this. Any suggestions will be appreciated.
 
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:52:05 AM, on 6/6/2014
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.19222)
Boot mode: Normal
 
Running processes:
C:\Program Files (x86)\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files (x86)\Skype\Phone\Skype.exe
C:\Program Files\SlimCleaner Plus\SlimCleanerPlus.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files (x86)\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files (x86)\Canon\IJ Network Scanner Selector EX\CNMNSST.exe
C:\Program Files (x86)\CyberLink\YouCam\YouCamService.exe
C:\Program Files (x86)\EPSON Software\Event Manager\EEventManager.exe
C:\Program Files (x86)\Common Files\Panasonic\PHOTOfunSTUDIO AutoStart\AutoStartupService.exe
C:\Program Files (x86)\Browny02\Brother\BrStMonW.exe
C:\Program Files (x86)\Avira\My Avira\Avira.OE.Systray.exe
C:\Program F... Read more

A:logonui.exe unable to locate component

I'll add more information on the problem and what I have tried so far. 
This computer has had the problem of looping on updates for months now. It would get updates but after restart, while it was trying to configure them it would say download failed and revert everything. I spent days on that trying to uninstall updates and reinstall them. I got it to where it had all but 2 updates and couldn't get any further. My father in law didn't want to have to reinstall all of his programs so he opted to put it off for a while to see if I came up with a fix. In the meantime, more updates tried to come in and failed. Also it looks like they installed office 2007. That may have been when this new problem started. They also installed adobe flash the same day.  
 
This is what I have tried, in order.
 
1. Last known good configuration, nothing.
 
2. Malwarebytes
That found several things but nothing that looked too bad and removing them didn't help. 
 
3. Startup Repair from Install disk (said found no problems)
 
4. System from Install Disk
I thought this one was going to work. There were lots of restore points. I picked one just before they installed office. It ran for a while then said the restore point was no good and reverted. No problem, I could just pick another. Nope. When I went back to restore all the previous restore points were just gone. 
 
5. Clean boot
 
6. SFC /Scannow 
Found some errors. Said it couldn't fix them... Read more

Read other 62 answers
RELEVANCY SCORE 50

Hi guys:

We have 3 computers connected to a hub forming a LAN using a DSL modem for shared internet access. One of the computers is a server and the other 2 are clients. A few weeks ago, one of the clients began receiving a recurring message: "Netscape unable to locate server xxxx" (the x's represent any website). Prior to a few weeks ago, no problem. We have attempted just about every trick in the book (reinstalling Netscape, removing and reinstalling everything in "Network", checking TCP/IP stacks, etc.). You name it, we tried it. We are using Internetshare's "All_Aboard" software. We've corresponding with them on numerous occasions, but they have no answers. We've browsed Netscape's online knowledge base at: http://help.netscape.com/ with no luck. What are 3 perplexed techies to do? As we said, only one client on this small LAN is afflicted with that dreaded error message. If someone has asolution, he/she will be given an all-expense paid vacation to the Bill Gate's estate. (just kidding) Seriously, any ideas are greatly appreciated.

Thanks in advance.
 

A:NETSCAPE UNABLE TO LOCATE SERVER...

Did you try reinstalling the NIC on the client? Are you running NT/2000? If so, how is the administration set up? Was there one point in time a few weeks ago when it suddenly stopped finding the server? Where or what was the client doing? Or just out of the blue one morning when user logged in?

The Don

------------------
To all who pass through, instead of around, the journey makes the end very sweet indeed.
 

Read other 3 answers
RELEVANCY SCORE 50

I'm running Windows XP - Media Center Edition on Intel Pentium 4 CPU 3.2GHz, 1.5G RAM

Earlier, Norton 360 detected and blocked several intrusion attempts, but stated that everything was secure.

Shortly thereafter, EVERY program that attempted to open would generate the following pop-up message, "[program name] UNABLE TO LOCATE COMPONENT - The application has failed to start because msefrms.dll was not found. Re-installing the application may fix this problem."

I click OK to acknowledge this message, only to have it reappear. After several "OK clicks", however, the program usually opens and functions properly.

I restarted my PC to get into safe mode to run a virus scan, but the message appears upon Windows boot (even on winlogon, services, lsass, etc.). Again, a few clicks of OK gets me past the message and into Windows.

I haven't been able to find ANY reference to msefrms.dll on the web. I was requested to post my HJT log - any help is greatly appreciated!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:18:55 PM, on 8/4/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\system32\spoolsv.exe
C:\P... Read more

A:Unable to Locate Component - msefrms.dll ?

Please do not double-post. Please read the rules, especially the section entitled "Multiple Postings".

http://forums.techguy.org/windows-nt-2000-xp/848924-unable-locate-component-msefrms-dll.html
 

Read other 1 answers
RELEVANCY SCORE 50

For almost every file I have on my computer, I get an error message that often doesn't let me access the file.

For example:

It says...
rundll32.exe - Unable to Locate Component
This application failed to start because netbmrgxkmb.dll was not found. Re-installing the application may fix this problem

The problem is that this happens with every application I try to open. Some still work, but many do not (like Firefox, Time/date on my computer, System Restore, etc)

I have searched everywhere online for this file but cannot seem to find it.

Please help.

Much appreciated. I have Windows XP by the way
 

A:Solved: Unable to locate component

Read other 9 answers
RELEVANCY SCORE 50

Hi there,

May i ask if there is a problem in my system, virus infection or malware if i experience this:

Every time i start up my system i get this error pop up:

"sistray.exe - Unable To Locate" - This application has failed to start because SiSBase.dll was not found. Reinstalling the application may fix this problem.
Need help, opinions...

Thanks.

Mon

A:sistray.exe - Unable To Locate error

See my reply to the same question which you posted in the XP Forum.

Read other 1 answers
RELEVANCY SCORE 50

Hey all, apparently on my family laptop a program was recently removed or something, and now I get an error message stating "This application has failed to start because MFC71U.DLL was no found. Re-Installing the application may fix this program.

I've searched to find out what VCUServe is, and apparently it's The Vaio installed camera component in the laptop. How can I go about getting this message to go away? I've heard there's a run command that can locate the origin of this problem and replace it.

If not, will simply finding a download for this VCUServe stop the problem? It's just a tad bit annoying, even though we don't use the camera.

A:Unable to Locate Component VCUServe.exe

Try this update fix for this:

http://www.downloadsource.net/16485/...ndows-2000-XP/

Read other 4 answers